Javad Rahimipetroudi

Hi Javad, if you are playing youtube videos. 720p works fine for me. 1080 freeezes.  
 
robertoj was able to get hardware video decocding working with ffmpeg-v4l2request. I haven't tested this method yet. 
 
 

Hi Javad,
Did you apply the GPU enable patch in your u-boot?
https://github.com/NickAlilovic/build/blob/v20241125/patch/u-boot/u-boot-sunxi/allwinner-h616-GPU-enable-hack.patch
 
 
 

Yes, you need it. 

Javad,
Have you patched your u-boot? You need these three patch files.
https://github.com/NickAlilovhttps://github.com/NickAlilovic/build/blob/v20241125/patch/u-boot/u-boot-sunxi/106-Add-int-phy-eth-H313-h616-with-AC300.patch
https://github.com/NickAlilovic/build/blob/v20241125/patch/u-boot/u-boot-sunxi/106-Add-int-phy-eth-H313-h616-with-AC300.patch
https://github.com/NickAlilovic/build/blob/v20241125/patch/u-boot/u-boot-sunxi/dts-Transpeed-8K618-T-Enable-Ethernet.patch
 
For your custom Kernel you need
https://github.com/NickAlilovic/build/blob/v20241125/patch/kernel/archive/sunxi-6.10/patches.armbian/arm64-dts-allwinner-h618-add-Transpeed-8K618-T-support.patch
 
The last two patches adds this to your u-boot and kernel DTS.
aliases { ethernet0 = &emac1; ethernet1 = &sdio_wifi; serial0 = &uart0; }; &emac1 { pinctrl-names = "default"; pinctrl-0 = <&rmii_pins>; phy-mode = "rmii"; phy-handle = <&rmii_phy>; phy-supply = <&reg_aldo1>; allwinner,rx-delay-ps = <3100>; allwinner,tx-delay-ps = <700>; status = "okay"; }; &mdio1 { rmii_phy: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; }; };  
 
You already have the EPHY 200 patched in your kernel. You have to edit your kernel config to enable it.
# # MII PHY device drivers # CONFIG_AC200_PHY=m  
# # Multifunction device drivers # CONFIG_MFD_AC200=m  
# # PHY Subsystem # CONFIG_AC200_PHY_CTL=m