teknoid

Nanopi Neo Plus 2 (H5)
linux-u-boot-nanopineoplus2-current_23.05.0-trunk--2022.07-Se092-P6b27-Ha9af-Vaada-B4b55_arm64.deb
linux-image-current-sunxi64_23.05.0-trunk--6.1.26-Sca1c-D4008-P8596-C1438Hfe66-HK01ba-Vc222-Ba98e_arm64.deb
OK, but distorted audio output over USB, I believe this came up since kernel 5.16+ and is still present in 6.x
 
Banana Pi Pro (A20)
linux-u-boot-bananapipro-current_23.05.0-trunk--2022.07-Se092-P6b27-H0429-Vaada-B4b55_armhf.deb
linux-image-current-sunxi_23.05.0-trunk--6.1.26-Sca1c-D4008-P8596-C596bHfe66-HK01ba-V014b-Ba98e_armhf.deb
OK
 
Odroid C2
linux-u-boot-odroidc2-current_23.05.0-trunk--2022.01-Sd637-P6c67-H7ff5-V603e-B4b55_arm64.deb
linux-image-current-meson64_23.05.0-trunk--6.1.27-Sca48-D4008-Pc5ba-C072bHfe66-HK01ba-Ve377-Ba98e_arm64.deb
OK
 
Armbian_23.05.0-trunk_Odroidc2_bullseye_current_6.1.29_minimal.img
full image test: OK
 
new build system is a very good improvement 👍
 

http://tron.dyn.cc/sun7i-bananpro-ahci.dts
download my test user overlay, copy it to your system and activate it (as root) with:
armbian-add-overlay sun7i-bananpro-ahci.dts this should work on any kernel below 5.17
after release of 22.05 you need to remove it from /boot/overlay-user/
 

yes, mostly the nodes in the device tree are available but deactivated with status = "disabled";
And you simply can active them by saying status = "okay"; in an overlay. Furhermore you can override the standard values.
What you did in the past with module parameters you nowdays do it in the device tree.
 
check this: https://elinux.org/images/f/f9/Petazzoni-device-tree-dummies_0.pdf It helped me to get an overview what DTS is and how it interacts with the linux kernel drivers. Oh yes, its not easy to understand. It will take some time (at least for me it took years) but playing around is good for practise and step by step you will get familiar with it.
 
Next version 22.05 will have the regulators enabled by default so you do not need the overlay anymore.
 
 
 

yes, mostly the nodes in the device tree are available but deactivated with status = "disabled";
And you simply can active them by saying status = "okay"; in an overlay. Furhermore you can override the standard values.
What you did in the past with module parameters you nowdays do it in the device tree.
 
check this: https://elinux.org/images/f/f9/Petazzoni-device-tree-dummies_0.pdf It helped me to get an overview what DTS is and how it interacts with the linux kernel drivers. Oh yes, its not easy to understand. It will take some time (at least for me it took years) but playing around is good for practise and step by step you will get familiar with it.
 
Next version 22.05 will have the regulators enabled by default so you do not need the overlay anymore.
 
 
 

solved with https://github.com/armbian/build/pull/3613
thanks @the-going

Hi @Igor perfect, thanks.
 
Next step is to upgarde the WIFI firmware to 5.90.244:
[ 13.975858] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: May 16 2018 23:42:49 version 5.90.244 FWID 01-0 I loaded it from kernel git here: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/brcm?id=d9430acf46774d75fa269a667b7b4598d60aa353
It magically diasppeared in the current kernel git repository, but I found it in a commit from 2018.
 
I will test it for the next few days and then upload to armbian firmware repo.

Hi @Igor perfect, thanks.
 
Next step is to upgarde the WIFI firmware to 5.90.244:
[ 13.975858] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: May 16 2018 23:42:49 version 5.90.244 FWID 01-0 I loaded it from kernel git here: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/brcm?id=d9430acf46774d75fa269a667b7b4598d60aa353
It magically diasppeared in the current kernel git repository, but I found it in a commit from 2018.
 
I will test it for the next few days and then upload to armbian firmware repo.

I know, I already hired for nanopi neo plus2 🙂
https://www.armbian.com/nanopi-neo-plus2/

https://github.com/armbian/build/pull/3504
this is my first pull request ever, please check.

https://github.com/armbian/build/pull/3504
this is my first pull request ever, please check.