Skip to content
View in the app

A better way to browse. Learn more.
Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Armbian 23.05 (Suni) Testings

Igor
in Armbian Project Administration

Featured Replies

I made a first round of testing, some manually:

 

 

and some via auto-testing machinery. Most of images works:

 

Spoiler

testing-man-13th.jpg

 

We need to fix Rpi4, Jetson nano, perhaps other media?

  • Igor pinned this topic

Nanopi Neo Plus 2 (H5)

linux-u-boot-nanopineoplus2-current_23.05.0-trunk--2022.07-Se092-P6b27-Ha9af-Vaada-B4b55_arm64.deb

linux-image-current-sunxi64_23.05.0-trunk--6.1.26-Sca1c-D4008-P8596-C1438Hfe66-HK01ba-Vc222-Ba98e_arm64.deb

OK, but distorted audio output over USB, I believe this came up since kernel 5.16+ and is still present in 6.x

 

Banana Pi Pro (A20)

linux-u-boot-bananapipro-current_23.05.0-trunk--2022.07-Se092-P6b27-H0429-Vaada-B4b55_armhf.deb

linux-image-current-sunxi_23.05.0-trunk--6.1.26-Sca1c-D4008-P8596-C596bHfe66-HK01ba-V014b-Ba98e_armhf.deb

OK

 

Odroid C2

linux-u-boot-odroidc2-current_23.05.0-trunk--2022.01-Sd637-P6c67-H7ff5-V603e-B4b55_arm64.deb

linux-image-current-meson64_23.05.0-trunk--6.1.27-Sca48-D4008-Pc5ba-C072bHfe66-HK01ba-Ve377-Ba98e_arm64.deb

OK

 

Armbian_23.05.0-trunk_Odroidc2_bullseye_current_6.1.29_minimal.img

full image test: OK

 

new build system is a very good improvement 👍

 

    • 1

    Orangepi R1 Plus LTS (RK3328) - networking issue AR-1747.

    Caused by one of the network interface logical names changing from eth0 to end0.
    I can can submit a PR to fix this with a rename in /etc/udev/rules.d/70-rename-lan.rules which is already created from a hook in the board config file (to rename the other network interface).  Already tested and works as expected on current and edge, Ubuntu and Debian.

    Before I take this route, I'm just wondering if anyone knows a reason for this happening that could possibly lead to a better fix?  I didn't find anything obvious in the PR's.

    Armbian_23.5.0-trunk.219_Station-p1_jammy_current_6.1.29_gnome_desktop

     

    - boot: first install tells "no internet connection found" but wired was connected and location based detected also worked.

    - HDMI video: Gnome desktop works decent on WQHD

    - HDMI sound could not be tested, lacking equipment

    - USB 2 and 3 work with mouse and keyboard

    - Installation to eMMC + boot w/o microSD works

    - Sound via 3.5 jack  PARTIALLY works. Only got right channel on my headphones. Headphones work properly on other computer.

     

    RockPI-S

    Armbian_23.5.0-trunk.219_Rockpi-s_bookworm_current_6.1.29_minimal.img

    is unusable.  It drops keystrokes from the serial console if one types quickly and appears to put the terminal emulator into a strange state.

    If one is patient enough with the keyboard, one can get through the setup, but the nmtui for connecting to WiFi cannot be used.

    Pressing down arrow in nmtui exits it. 

    Is anyone else having trouble configuring the minimal bookworm images?

     

    The corresponding full image is fine.

    Tested:

      Bluetooth

      Ethernet

      WiFi

      audio (at least the audio devices appear and the mixer works)

     

    Boot up messages on the serial console appear to be truncated at 70 columns or so.

    But, that's probably someone's idea of "progress"

    (or, am I the only one noticing this?)

     

    As noted earlier, the system failed to assign a repeatable wlan0 MAC address due to its missing ifconfig.

    I'll submit a PR to fix this.

     

    2 часа назад, Werner сказал:

    Maybe all media should be moved to csc for this reason.

    there are no such devices in any form on the official page (there is no point in testing them). the media kernel obtained from armbian-next is useless and dangerous for users, it should not be in network repositories (getting it on existing systems will lead to problems). the same goes for u-boot.

    # Pinebook Pro testing

     

    ## Armbian_23.5.0-trunk.219_Pinebook-pro_jammy_current_6.1.29_gnome_desktop

    - Boots live disk [x]
    - Installs to eMMC - ext4 [x]
       - Fn keys works [] : NOTE F9 and F10 are swapped
          - Fn1 [x]
          - Fn2 [x]
          - Fn3 []
          - Fn4 [x]
          - Fn5 [x]
          - Fn6 [x]
          - Fn7 [x]
          - Fn8 []
          - Fn9 []
          - Fn10 []
          - Fn11 []
          - Fn12 []
       - Wi-Fi works [x]
       - Bluetooth works []
       - Touchpad works [x]
          - Ports
          - USB-C - data [x]
          - USB-C - power [x]
          - USB-A - data [x]

    BUG: Screen locking does not work without GDM.

    ## Armbian_23.5.0-trunk.219_Pinebook-pro_jammy_current_6.1.29_xfce_desktop

    - Boots live disk [x]
    - Installs to eMMC - ext4 [x]
       - Fn keys works [] : NOTE F9 and F10 are swapped
          - ESC []
          - Fn1 [x]
          - Fn2 [x]
          - Fn3 [x]
          - Fn4 []
          - Fn5 []
          - Fn6 []
          - Fn7 [x]
          - Fn8 []
          - Fn9 []
          - Fn10 []
          - Fn11 []
          - Fn12 []
       - Wi-Fi works [x]
       - Bluetooth works []
       - Touchpad works [x]
          - Ports
          - USB-C - data [x]
          - USB-C - power [x]
          - USB-A - data [x]

     

    BUG1: Ubuntu artwork is being used instead of Armbian during live disk boot once in the desktop. Shows the Ubuntu artwork during boot once installed to eMMC, it does show Armbian artwork at login screen/desktop.

    BUG2: Touchpad is very jumpy.

     

    ## Armbian_23.5.0-trunk.219_Pinebook-pro_jammy_current_6.1.29_i3-wm_desktop

    - Boots live disk [x]
    - Installs to eMMC - ext4 [x]
       - Fn keys works [] : NOTE F9 and F10 are swapped
          - Fn1 [x]
          - Fn2 [x]
          - Fn3 [x]
          - Fn4 []
          - Fn5 []
          - Fn6 []
          - Fn7 [x]
          - Fn8 []
          - Fn9 []
          - Fn10 []
          - Fn11 []
          - Fn12 []
       - Wi-Fi works [x]
       - Bluetooth works []
       - Touchpad works [x]
       - Ports
          - USB-C - data [x]
          - USB-C - power [x]
          - USB-A - data [x]

     

    BUG1: Battery indicator says no battery, I have opened a report of it here: https://armbian.atlassian.net/browse/AR-1756

    BUG2: Touchpad is very jumpy.

     

    # Not tested yet
    ## Armbian_23.5.0-trunk.219_Pinebook-pro_jammy_current_6.1.29_minimal

    - Boots live disk []
    - Installs to eMMC []
       - Fn keys works []
          - Fn1 []
          - Fn2 []
          - Fn3 []
          - Fn4 []
          - Fn5 []
          - Fn6 []
          - Fn7 []
          - Fn8 []
          - Fn9 []
          - Fn10 []
          - Fn11 []
          - Fn12 []
       - Wi-Fi works []
       - Bluetooth works []
       - Touchpad works []
          - Ports
          - USB-C - data []
          - USB-C - power []
          - USB-A - data []

    Edited by ahoneybun

    • 1
    • Author
    9 hours ago, brentr said:

    It drops keystrokes from the serial console if one types quickly and appears to put the terminal emulator into a strange state.

    If one is patient enough with the keyboard, one can get through the setup, but the nmtui for connecting to WiFi cannot be used.

    Pressing down arrow in nmtui exits it. 

     

    I have seen this before, but some time ago. Today I have tested numerous of minimal builds on different boards and can't recreate this behaviour. I will try on Rockpi S when I get to it - its not easily accessible.

    Rock Pi 4A and 4C boot to working gigabit ethernet with bookworm-current minimal image, USB ports all work. HDMI output not tested yet.

     

    Rock 3A also boots to working gigabit ethernet with jammy-edge minimal image. USB ports all work. HDMI output not tested yet here either.

     

    Rock64 also boots to working gigabit ethernet with bookworm-current minimal image. USB ports all work. HDMI output not tested.

    Edited by clee

    • 1

    Rock Pi-4B - Armbian_23.05.1_Rockpi-4b_jammy_current_6.1.30_gnome_desktop.img

    installed to emmc: logs 

    wlan, hdmi, nvme working

     

    Rock-5B - Armbian_23.05.1_Rock-5b_jammy_legacy_5.10.160_gnome_desktop.img

    Took me a while to boot from SD, was using an older 23.05-trunk version.

    Even 'sudo dd if=zero.img of=/dev/mtdblock0' with radxa zero.img would continue to boot happily from nvme instead of sd, changed armbianEnv.txt to sd root, updated bootloaderon mtd -> worked.

    besides mtd being a mystical thing for me, almost anything worked:
    installed to mtd+nvme: logs
    using btrfs on nvme + mtd did not work (don't know if supported, but installer lets you pick it).
    performance with panfrost ppa's enabled is absolutely stunning. 

    Btw, this time for testing I used my 45W PD PSU (+ PD C<->C Cable 60W) instead of fixed 5V@4A w/o errors and activated the max 12V PD option in armbian-config just for fun.
    Sensors report ed 

    in0:          12.00 V  (min = +12.00 V, max = +12.00 V)
curr1:         1.50 A  (max =  +1.50 A)

    and had no reboots or whatsoever.

    Edited by fraz0815
    added rock-5b, some PSU infos

    • 1
    • Igor unpinned this topic
    Go to topic listing

    Account

    Navigation

    Search

    Search

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.