Hi folks, i got my orange pi zero a few weeks ago but had no time to assemble it. This evening i got the time but i was in toughts and rubbed an resistor off the board.

Can please measure someone the value of the missing resistor? Otherwise iam srcewed :/

 

16 hours ago, philippe11 said:

value of the missing resistor

According to silkscreen, the resistor you are pointing to is R5, and according to schematic, R5 is a 6K 1%, and I've measured it and seems to be right. This resistor is part of Ethernet PHY.

Thank you for your help! I will solder a trimpot on the spot with that value 

 

if i may ask you, what schematics? Is there a whole schematic of the board? The only thing i know is the vcore is messed up and the cpu overheats. Hm.. 

24 minutes ago, philippe11 said:

if i may ask you, what schematics? Is there a whole schematic of the board?

http://linux-sunxi.org/images/e/e0/Orange-Pi-Zero-Schanetics-v1_11.pdf

or

http://www.orangepi.org/download/orange_pi-zero-v1_11.pdf

 

Thank you sir!

I got mine fixed, the only smd resistors i had around were 4.7K ohm. Anyway, it works.