Skip to content
View in the app

A better way to browse. Learn more.
Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Should I be worried about this “ata1: softreset failed (1st FIS failed)”?

tmb
in Rockchip

Featured Replies

I’ve googled it but can’t decide, the drive works just fine (it’s the 1st of the three disks I have in the box), no performance issues when copying from/to the box.

I’m currently on “Armbian 20.11”, barely get the time to play with the setup due to work assignments, plan to update soon.

 

Thanks!

(PS. Newbie here)

 

[   13.298079] ata1: softreset failed (1st FIS failed)
[   18.449169] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   18.467303] ata1.00: ATA-10: ST6000VN0033-2EE110, SC60, max UDMA/133
[   18.467315] ata1.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   18.470029] ata1.00: configured for UDMA/133
[   18.470721] scsi 0:0:0:0: Direct-Access     ATA      ST6000VN0033-2EE SC60 PQ                                                                                                                                                             : 0 ANSI: 5
[   18.472237] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5                                                                                                                                                             .46 TiB)
[   18.472247] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   18.472299] sd 0:0:0:0: [sda] Write Protect is off
[   18.472309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   18.472393] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does                                                                                                                                                             n't support DPO or FUA
[   18.580573]  sda: sda1
[   18.583350] sd 0:0:0:0: [sda] Attached SCSI disk
[   18.949151] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   18.959809] ata2.00: ATA-10: ST6000VN0033-2EE110, SC60, max UDMA/133
[   18.959822] ata2.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   18.962526] ata2.00: configured for UDMA/133
[   18.963133] scsi 1:0:0:0: Direct-Access     ATA      ST6000VN0033-2EE SC60 PQ                                                                                                                                                             : 0 ANSI: 5
[   18.964436] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5                                                                                                                                                             .46 TiB)
[   18.964451] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   18.964520] sd 1:0:0:0: [sdb] Write Protect is off
[   18.964534] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   18.964651] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does                                                                                                                                                             n't support DPO or FUA
[   19.017200]  sdb: sdb1
[   19.019847] sd 1:0:0:0: [sdb] Attached SCSI disk
[   19.441176] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   19.450989] ata3.00: ATA-10: ST6000VN0033-2EE110, SC60, max UDMA/133
[   19.451001] ata3.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   19.453715] ata3.00: configured for UDMA/133
[   19.454064] scsi 2:0:0:0: Direct-Access     ATA      ST6000VN0033-2EE SC60 PQ                                                                                                                                                             : 0 ANSI: 5
[   19.455164] sd 2:0:0:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5                                                                                                                                                             .46 TiB)
[   19.455178] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[   19.455248] sd 2:0:0:0: [sdc] Write Protect is off
[   19.455262] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   19.455378] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, does                                                                                                                                                             n't support DPO or FUA
[   19.507285]  sdc: sdc1
[   19.509063] sd 2:0:0:0: [sdc] Attached SCSI disk
[   19.767590] ata4: SATA link down (SStatus 0 SControl 300)
[   20.079588] ata5: SATA link down (SStatus 0 SControl 300)
 

 

Guest
This topic is now closed to further replies.
Go to topic listing

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.