Odroid M1 - Specs

• Board Dimensions: 90mm x 122mm x 16mm
• Heatsink Dimensions: 100mm x 123mm x 19mm
• Weight: 253 g including heatsink
• Rockchip RK3568 Processor
  • L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
  • L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor
  • L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.992GHz)
  • ARMv8-A architecture with Neon and Crypto extensions
  • Mali-G52 MP2 GPU with 4 x Execution Engines (650Mhz)
• 0.8Tops@INT8, integrated high-performance AI accelerator RKNN NPU
  • Supports one-click switching of Caffe/TensorFlow/TFLite/ONNX/PyTorch/Keras/Darknet
• 4 or 8GiB LPDDR4 with 32-bit bus width memory
  • Data rate: 3120 MT/s, up to 1,560MHz
• 1 x eMMC slot
• 1 x Micro SD slot (DS/HS mode up to UHS-I SDR104)
• 1 x NVME M.2 SSD (PCIe 3.0 x 2)
• 1 x SATA3.0
• 1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
  • Realtek RTL8211F (Ethernet transceiver)
  • LED indicators
  • Green LED: Flashing by data traffics at 100Mbps connection
  • Amber LED: Flashing by data traffics at 1000Mbps connection
• 1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID)
• 1 x MIPI-DSI (works with 800 x 1280 LCD)
• 1 x 3.5mm phone jack
• 1 x mono speaker output
• 1 x HDMI sound
• 2 x USB 2.0 host port
• 2 x USB 3.0 host port (or 1 x USB 3.0 host + 1 x USB 2.0 OTG port)
• 1 x Debug serial console (UART, 1.5Mbps N81)
• 1 x SATA Connector
• 1 x MIPI-CSI Camera Interface (15 pin)
• 1 x MIPI-DSI LCD Interface (31 pin)
• 1 x 40pin GPIO header
• IR receiver for remote controller
• RTC and backup battery holder (to keep time and date for several months without main power input)
• System LED Indicators:
  • Red (POWER) – Solid light when DC power is connected
  • Blue (ALIVE) – Flashing “heartbeat” while Kernel is running. Solid On when in the u-boot stage.
• 1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm
• DC input : 7.5V ~ 15.5V
  • DC 12V/2A power adapter is recommended
  • IDLE : ≃ 1.25W
  • CPU Stress : ≃ 4.44W (Performance governor)
  • Power Off : ≃ 0W

https://www.hardkernel.com/shop/odroid-m1-with-8gbyte-ram/