Skip to content
View in the app

A better way to browse. Learn more.
Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Clean install Odroidc2 Armbian 5.21 and upgrade to 5.23 to eMMC blue solid light after rebooting 2 times

MICE
in Amlogic meson

Featured Replies

did a clean install of Armbian_5.21_Odroidc2_Debian_jessie_3.14.79.img

when i today apt-get upgrade to Armbian 5.23 the same problem occured on the eMMC after rebooting the system 2 times.

 

did the same install on a micro-sd card 1 UHS no problem :S

 

it appears to happen every time on a Armbian version upgrade.

 

Please HELP!

 

 

upgrade log eMMC:

 

apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
  armbian-firmware hostapd linux-dtb-odroidc2 linux-headers-odroidc2 linux-image-odroidc2
  linux-jessie-root-odroidc2 linux-u-boot-odroidc2-default sunxi-tools tzdata
9 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/23.0 MB of archives.
After this operation, 73.7 kB of additional disk space will be used.
Do you want to continue? [Y/n]
Preconfiguring packages ...
(Reading database ... 57040 files and directories currently installed.)
Preparing to unpack .../tzdata_2016h-0+deb8u1_all.deb ...
Unpacking tzdata (2016h-0+deb8u1) over (2016f-0+deb8u1) ...
Setting up tzdata (2016h-0+deb8u1) ...

Current default time zone: 'Europe/Amsterdam'
Local time is now:      Thu Oct 27 08:31:27 CEST 2016.
Universal Time is now:  Thu Oct 27 06:31:27 UTC 2016.
Run 'dpkg-reconfigure tzdata' if you wish to change it.

(Reading database ... 57043 files and directories currently installed.)
Preparing to unpack .../armbian-firmware_5.22_arm64.deb ...
Unpacking armbian-firmware (5.22) over (5.21) ...
Preparing to unpack .../hostapd_1%3a2.5~armbian5.23+1_arm64.deb ...
Unpacking hostapd (1:2.5~armbian5.23+1) over (1:2.5~armbian5.21+1) ...
Preparing to unpack .../linux-dtb-odroidc2_5.23_arm64.deb ...
Unpacking linux-dtb-odroidc2 (5.23) over (5.21) ...
Preparing to unpack .../linux-headers-odroidc2_5.23_arm64.deb ...
Unpacking linux-headers-odroidc2 (5.23) over (5.21) ...
Preparing to unpack .../linux-image-odroidc2_5.23_arm64.deb ...
/etc/kernel/preinst.d/initramfs-cleanup: 17: /etc/kernel/preinst.d/initramfs-cleanup: linux-version: not found
Unpacking linux-image-odroidc2 (5.23) over (5.21) ...
Preparing to unpack .../linux-jessie-root-odroidc2_5.23_arm64.deb ...
Adding 'diversion of /etc/mpv/mpv.conf to /etc/mpv/mpv-dist.conf by linux-jessie-root-odroidc2'
Unpacking linux-jessie-root-odroidc2 (5.23) over (5.21) ...
Preparing to unpack .../linux-u-boot-odroidc2-default_5.23_arm64.deb ...
Unpacking linux-u-boot-odroidc2-default (5.23) over (5.21) ...
Preparing to unpack .../sunxi-tools_1.3-1~armbian5.23+1_arm64.deb ...
Unpacking sunxi-tools (1.3-1~armbian5.23+1) over (1.3-1~armbian5.21+1) ...
Processing triggers for systemd (215-17+deb8u5) ...
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for initramfs-tools (0.120+deb8u2) ...
ln: failed to create hard link ‘/boot/initrd.img-3.14.79-odroidc2.dpkg-bak’ => ‘/boot/initrd.img-3.14.79-odroidc2’: Operation not permitted
update-initramfs: Generating /boot/initrd.img-3.14.79-odroidc2
Setting up armbian-firmware (5.22) ...
Setting up hostapd (1:2.5~armbian5.23+1) ...
Setting up linux-dtb-odroidc2 (5.23) ...
Setting up linux-headers-odroidc2 (5.23) ...
Compiling headers - please wait ...
Setting up linux-image-odroidc2 (5.23) ...
update-initramfs: Generating /boot/initrd.img-3.14.79-odroidc2
Setting up linux-jessie-root-odroidc2 (5.23) ...
Setting up linux-u-boot-odroidc2-default (5.23) ...
Updating u-boot on device /dev/mmcblk0
Setting up sunxi-tools (1.3-1~armbian5.23+1) ...
Processing triggers for initramfs-tools (0.120+deb8u2) ...
ln: failed to create hard link ‘/boot/initrd.img-3.14.79-odroidc2.dpkg-bak’ => ‘/boot/initrd.img-3.14.79-odroidc2’: Operation not permitted
update-initramfs: Generating /boot/initrd.img-3.14.79-odroidc2

  • Author

drwxr-x---+ 5 root root     4096 Oct 28 15:10 ../
-rw-r--r--  1 ice  ice      6944 Oct  7 11:28 boot.bmp
-rw-r--r--  1 ice  ice      4385 Oct  7 11:26 boot.ini
-rw-r--r--  1 ice  ice    110078 Oct 23 16:53 config-3.14.79-odroidc2
drwxr-xr-x  2 ice  ice      2048 Oct 28 15:07 dtb/
drwxr-xr-x  3 ice  ice      2048 Oct 28 15:07 dtb-3.14.79-odroidc2.old/
-rw-r--r--  1 ice  ice   4877199 Oct 28 15:09 initrd.img-3.14.79-odroidc2
-rw-r--r--  1 ice  ice   2799045 Oct 23 16:53 System.map-3.14.79-odroidc2
-rw-r--r--  1 ice  ice   4877263 Oct 28 15:09 uInitrd
-rw-r--r--  1 ice  ice  12603184 Oct 23 16:53 zImage
 

 

 

 

post-1761-0-47490000-1477660292_thumb.png

post-1761-0-34981700-1477660316_thumb.png

post-1761-0-55643500-1477660331_thumb.png

Hello, I'm new here and new to armbian,too.

 

I have exactly same error. Clean install of 5.21 and I can reboot and shutdown any times. After running apt-get upgrade I can restart once, the second time it hangs.

 

I've noticed this error during upgrade:

 

ln: failed to create hard link ‘/boot/initrd.img-3.14.79-odroidc2.dpkg-bak’ => ‘/boot/initrd.img-3.14.79-odroidc2’: Operation not permitted
Contents of the boot partition:    

IAh1ZnA.jpg

 

And the complete serial console log:

 

: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.296130 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Oct 10 2016 - 20:43:20)

DRAM:  2 GiB
Relocation Offset is: 76f3f000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFD636D
MAC : 00:1e:06:33:af:ed
BID : HKC2211608
-------------------------------------------------
register usb cfg[1][0] = 0000000077f97338
register usb cfg[0][1] = 0000000077f97360
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f37d30
aml_priv->desc_buf = 0x0000000073f39ec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 32 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
4385 bytes read in 3 ms (1.4 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv m "1080p60hz" # Progressive 60Hz
cfgload:
cfgload: setenv cec "cecf"
cfgload: setenv m_bpp "24"
cfgload: setenv mesontimer "0"
cfgload: setenv nographics "0"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv condev "console=ttyS0,115200n8 console=tty0 consoleblank=0"   #
cfgload: setenv verbosity "1"
cfgload: setenv bootargs "root=/dev/mmcblk0p2 rootwait rootflags=data=writeback
cfgload: setenv loadaddr "0x11000000"
cfgload: setenv dtb_loadaddr "0x1000000"
cfgload: setenv initrd_loadaddr "0x13000000"
cfgload: fatload mmc 0:1 ${initrd_loadaddr} uInitrd
reading uInitrd
4877990 bytes read in 115 ms (40.5 MiB/s)
cfgload: fatload mmc 0:1 ${loadaddr} zImage
reading zImage
12603184 bytes read in 293 ms (41 MiB/s)
cfgload: fatload mmc 0:1 ${dtb_loadaddr} dtb/meson64_odroidc2.dtb
reading dtb/meson64_odroidc2.dtb
29164 bytes read in 5 ms (5.6 MiB/s)
cfgload: fdt addr ${dtb_loadaddr}
cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/c
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /ao
cfgload: booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4877926 Bytes = 4.7 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 73a8e000, end 73f34e66 ... OK
   Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK

Starting kernel ...

uboot time: 3594220 us
â–’GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
TE: 278601
no sdio debug board detected

BL2 Built : 11:44:26, Nov 25 2015.
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK.
Run bl30...
Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size: 0x000012e0
Wait bl30...Done
Sending bl301.....OK.
Run bl301...
d bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@dr
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size: 0x00066de0
: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.393483 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Oct 07 2016 - 06:32:17)

DRAM:  2 GiB
Relocation Offset is: 76f3f000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFD636D
MAC : 00:1e:06:33:af:ed
BID : HKC2211608
-------------------------------------------------
register usb cfg[1][0] = 0000000077f97338
register usb cfg[0][1] = 0000000077f97360
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f37d30
aml_priv->desc_buf = 0x0000000073f39ec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
*** Warning - bad CRC, using default environment

Saving Environment to MMC...
Writing to MMC(0)... done
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 32 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Saving Environment to MMC...
Writing to MMC(0)... done
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
4385 bytes read in 3 ms (1.4 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv m "1080p60hz" # Progressive 60Hz
cfgload:
cfgload: setenv cec "cecf"
cfgload: setenv m_bpp "24"
cfgload: setenv mesontimer "0"
cfgload: setenv nographics "0"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv condev "console=ttyS0,115200n8 console=tty0 consoleblank=0"   #
cfgload: setenv verbosity "1"
cfgload: setenv bootargs "root=/dev/mmcblk0p2 rootwait rootflags=data=writeback
cfgload: setenv loadaddr "0x11000000"
cfgload: setenv dtb_loadaddr "0x1000000"
cfgload: setenv initrd_loadaddr "0x13000000"
cfgload: fatload mmc 0:1 ${initrd_loadaddr} uInitrd
reading uInitrd
4872289 bytes read in 112 ms (41.5 MiB/s)
cfgload: fatload mmc 0:1 ${loadaddr} zImage
reading zImage
12603184 bytes read in 289 ms (41.6 MiB/s)
cfgload: fatload mmc 0:1 ${dtb_loadaddr} dtb/meson64_odroidc2.dtb
reading dtb/meson64_odroidc2.dtb
29164 bytes read in 5 ms (5.6 MiB/s)
cfgload: fdt addr ${dtb_loadaddr}
cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/c
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /ao
cfgload: booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4872225 Bytes = 4.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 73a8f000, end 73f34821 ... OK
   Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK

Starting kernel ...

uboot time: 3701906 us

Debian GNU/Linux 8 odroidc2 ttyS0

odroidc2 login: [   31.098494] reboot: Restarting system
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State ON
INFO:      AffInst: Level 0, MPID 0x2, State ON
INFO:      AffInst: Level 0, MPID 0x3, State ON
bl31 rebâ–’GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
TE: 59655
no sdio debug board detected

BL2 Built : 11:44:26, Nov 25 2015.
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK.
Run bl30...
Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size: 0x000012e0
Wait bl30...Done
Sending bl301.....OK.
Run bl301...
ad bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@dr
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size: 0x00066de0
: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.174557 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Oct 07 2016 - 06:32:17)

DRAM:  2 GiB
Relocation Offset is: 76f3f000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFD636D
MAC : 00:1e:06:33:af:ed
BID : HKC2211608
-------------------------------------------------
register usb cfg[1][0] = 0000000077f97338
register usb cfg[0][1] = 0000000077f97360
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f37d30
aml_priv->desc_buf = 0x0000000073f39ec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 32 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
4385 bytes read in 3 ms (1.4 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv m "1080p60hz" # Progressive 60Hz
cfgload:
cfgload: setenv cec "cecf"
cfgload: setenv m_bpp "24"
cfgload: setenv mesontimer "0"
cfgload: setenv nographics "0"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv condev "console=ttyS0,115200n8 console=tty0 consoleblank=0"   #
cfgload: setenv verbosity "1"
cfgload: setenv bootargs "root=/dev/mmcblk0p2 rootwait rootflags=data=writeback
cfgload: setenv loadaddr "0x11000000"
cfgload: setenv dtb_loadaddr "0x1000000"
cfgload: setenv initrd_loadaddr "0x13000000"
cfgload: fatload mmc 0:1 ${initrd_loadaddr} uInitrd
reading uInitrd
4872289 bytes read in 113 ms (41.1 MiB/s)
cfgload: fatload mmc 0:1 ${loadaddr} zImage
reading zImage
12603184 bytes read in 289 ms (41.6 MiB/s)
cfgload: fatload mmc 0:1 ${dtb_loadaddr} dtb/meson64_odroidc2.dtb
reading dtb/meson64_odroidc2.dtb
29164 bytes read in 5 ms (5.6 MiB/s)
cfgload: fdt addr ${dtb_loadaddr}
cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/c
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /ao
cfgload: booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4872225 Bytes = 4.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 73a8f000, end 73f34821 ... OK
   Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK

Starting kernel ...

uboot time: 3467591 us

Debian GNU/Linux 8 odroidc2 ttyS0

odroidc2 login: root
Password:
You are required to change your password immediately (root enforced)
Changing password for root.
(current) UNIX password:
Enter new UNIX password:
Retype new UNIX password:
Linux odroidc2 3.14.79-odroidc2 #2 SMP PREEMPT Fri Oct 7 11:25:40 CEST 2016 aarc
  ___      _           _     _    ____ ____
 / _ \  __| |_ __ ___ (_) __| |  / ___|___ \
| | | |/ _` | '__/ _ \| |/ _` | | |     __) |
| |_| | (_| | | | (_) | | (_| | | |___ / __/
 \___/ \__,_|_|  \___/|_|\__,_|  \____|_____|


Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.14.79-odroidc2
System load:   0.58             Up time:       47 sec
Memory usage:  7 % of 1719Mb    IP:            192.168.1.32
CPU temp:      32°C
Usage of /:    4% of 29G

New to Armbian? Check the documentation first: docs.armbian.com


Thank you for choosing Armbian! Support: www.armbian.com

Creating new account. Please provide a username (eg. your forename): id001
Adding user `id001' ...
Adding new group `id001' (1000) ...
Adding new user `id001' (1000) with group `id001' ...
Creating home directory `/home/id001' ...
Copying files from `/etc/skel' ...
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
Changing the user information for id001
Enter the new value, or press ENTER for the default
        Full Name []: id001
        Room Number []:
        Work Phone []:
        Home Phone []:
        Other []:
Is the information correct? [Y/n]

Dear id001, your account id001 has been created and is sudo enabled.
Please use this account for your daily work from now on.

root@odroidc2:~# htop

  1  [                          0.0%]     Tasks: 17, 3 thr; 1 running
  2  [|                         0.5%]     Load average: 0.40 0.20 0.07
  3  [                          0.0%]     Uptime: 00:01:19
  4  [                          0.0%]
  Mem[||||||              119/1719MB]
  Swp[                       0/127MB]

  PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
 1035 root       20   0  5376  1828  1304 R  0.9  0.1  0:00.09 htop
  496 root       20   0  7684  3736   640 S  0.0  0.2  0:00.98 /usr/sbin/haveged
    1 root       20   0  7124  4412  1900 S  0.0  0.3  0:01.94 /sbin/init
  209 root       20   0  8356  2088  1804 S  0.0  0.1  0:00.33 /lib/systemd/syst
  213 root       20   0 11112  1636  1096 S  0.0  0.1  0:00.20 /lib/systemd/syst
  500 root       20   0  5188  1268  1004 S  0.0  0.1  0:00.00 /usr/sbin/cron -f
  502 root       20   0  8272  2932  2308 S  0.0  0.2  0:00.06 /usr/sbin/sshd -D
  505 root       20   0  3788  1524  1196 S  0.0  0.1  0:00.04 /lib/systemd/syst
  542 ntp        20   0  6252  2168  1580 S  0.0  0.1  0:00.03 /usr/sbin/ntpd -p
  543 messagebu  20   0  5304  1772  1392 S  0.0  0.1  0:00.14 /usr/bin/dbus-dae
  615 root       20   0  220M  2116  1436 S  0.0  0.1  0:00.01 /usr/sbin/rsyslog
  616 root       20   0  220M  2116  1436 S  0.0  0.1  0:00.00 /usr/sbin/rsyslog
  617 root       20   0  220M  2116  1436 S  0.0  0.1  0:00.02 /usr/sbin/rsyslog
  611 root       20   0  220M  2116  1436 S  0.0  0.1  0:00.06 /usr/sbin/rsyslog
root@odroidc2:~# reboot
[   89.338477] reboot: Restarting system
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State ON
INFO:      AffInst: Level 0, MPID 0x2, State ON
INFO:      AffInst: Level 0, MPID 0x3, State ON
bl31 rebâ–’GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
TE: 59425
no sdio debug board detected

BL2 Built : 11:44:26, Nov 25 2015.
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK.
Run bl30...
Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size: 0x000012e0
Wait bl30...Done
Sending bl301.....OK.
Run bl301...
d bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@dr
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size: 0x00066de0
: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.174216 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Oct 07 2016 - 06:32:17)

DRAM:  2 GiB
Relocation Offset is: 76f3f000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFD636D
MAC : 00:1e:06:33:af:ed
BID : HKC2211608
-------------------------------------------------
register usb cfg[1][0] = 0000000077f97338
register usb cfg[0][1] = 0000000077f97360
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f37d30
aml_priv->desc_buf = 0x0000000073f39ec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 32 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
4385 bytes read in 3 ms (1.4 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv m "1080p60hz" # Progressive 60Hz
cfgload:
cfgload: setenv cec "cecf"
cfgload: setenv m_bpp "24"
cfgload: setenv mesontimer "0"
cfgload: setenv nographics "0"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv condev "console=ttyS0,115200n8 console=tty0 consoleblank=0"   #
cfgload: setenv verbosity "1"
cfgload: setenv bootargs "root=/dev/mmcblk0p2 rootwait rootflags=data=writeback
cfgload: setenv loadaddr "0x11000000"
cfgload: setenv dtb_loadaddr "0x1000000"
cfgload: setenv initrd_loadaddr "0x13000000"
cfgload: fatload mmc 0:1 ${initrd_loadaddr} uInitrd
reading uInitrd
4872289 bytes read in 113 ms (41.1 MiB/s)
cfgload: fatload mmc 0:1 ${loadaddr} zImage
reading zImage
12603184 bytes read in 290 ms (41.4 MiB/s)
cfgload: fatload mmc 0:1 ${dtb_loadaddr} dtb/meson64_odroidc2.dtb
reading dtb/meson64_odroidc2.dtb
29164 bytes read in 5 ms (5.6 MiB/s)
cfgload: fdt addr ${dtb_loadaddr}
cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/c
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /ao
cfgload: booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4872225 Bytes = 4.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 73a8f000, end 73f34821 ... OK
   Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK

Starting kernel ...

uboot time: 3467493 us

Debian GNU/Linux 8 odroidc2 ttyS0

odroidc2 login: root
Password:
Last login: Fri Oct 28 23:19:57 CEST 2016 on ttyS0
Linux odroidc2 3.14.79-odroidc2 #2 SMP PREEMPT Fri Oct 7 11:25:40 CEST 2016 aarc
  ___      _           _     _    ____ ____
 / _ \  __| |_ __ ___ (_) __| |  / ___|___ \
| | | |/ _` | '__/ _ \| |/ _` | | |     __) |
| |_| | (_| | | | (_) | | (_| | | |___ / __/
 \___/ \__,_|_|  \___/|_|\__,_|  \____|_____|


Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.14.79-odroidc2
System load:   0.40             Up time:       43 sec
Memory usage:  7 % of 1719Mb    IP:            192.168.1.32
CPU temp:      34°C
Usage of /:    4% of 29G

root@odroidc2:~# htop

  1  [                          0.0%]     Tasks: 17, 3 thr; 1 running
  2  [||||||||                 25.0%]     Load average: 0.31 0.13 0.05
  3  [                          0.0%]     Uptime: 00:00:59
  4  [                          0.0%]
  Mem[|||||               118/1719MB]
  Swp[                       0/127MB]

  PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
  940 root       20   0  5376  1820  1296 R  1.4  0.1  0:00.08 htop
    1 root       20   0  7440  4620  1892 S  0.0  0.3  0:01.69 /sbin/init
  209 root       20   0  8356  2064  1780 S  0.0  0.1  0:00.33 /lib/systemd/syst
  213 root       20   0 11252  1748  1100 S  0.0  0.1  0:00.21 /lib/systemd/syst
  498 root       20   0  7684  3732   640 S  0.0  0.2  0:00.96 /usr/sbin/haveged
  501 root       20   0  5188  1272  1004 S  0.0  0.1  0:00.00 /usr/sbin/cron -f
  502 root       20   0  8272  2940  2308 S  0.0  0.2  0:00.06 /usr/sbin/sshd -D
  505 root       20   0  3788  1524  1196 S  0.0  0.1  0:00.02 /lib/systemd/syst
  540 ntp        20   0  6252  2164  1580 S  0.0  0.1  0:00.02 /usr/sbin/ntpd -p
  545 messagebu  20   0  5304  1592  1228 S  0.0  0.1  0:00.05 /usr/bin/dbus-dae
  610 root       20   0  220M  2240  1440 S  0.0  0.1  0:00.01 /usr/sbin/rsyslog
  611 root       20   0  220M  2240  1440 S  0.0  0.1  0:00.00 /usr/sbin/rsyslog
  612 root       20   0  220M  2240  1440 S  0.0  0.1  0:00.03 /usr/sbin/rsyslog
  600 root       20   0  220M  2240  1440 S  0.0  0.1  0:00.06 /usr/sbin/rsyslog
root@odroidc2:~# reboot
[   70.738605] reboot: Restarting system
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State ON
INFO:      AffInst: Level 0, MPID 0x2, State ON
INFO:      AffInst: Level 0, MPID 0x3, State ON
bl31 rebâ–’GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
TE: 59330
no sdio debug board detected

BL2 Built : 11:44:26, Nov 25 2015.
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK.
Run bl30...
Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size: 0x000012e0
Wait bl30...Done
Sending bl301.....OK.
Run bl301...
d bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@dr
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size: 0x00066de0
: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.174128 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Oct 07 2016 - 06:32:17)

DRAM:  2 GiB
Relocation Offset is: 76f3f000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFD636D
MAC : 00:1e:06:33:af:ed
BID : HKC2211608
-------------------------------------------------
register usb cfg[1][0] = 0000000077f97338
register usb cfg[0][1] = 0000000077f97360
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f37d30
aml_priv->desc_buf = 0x0000000073f39ec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 32 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
4385 bytes read in 3 ms (1.4 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv m "1080p60hz" # Progressive 60Hz
cfgload:
cfgload: setenv cec "cecf"
cfgload: setenv m_bpp "24"
cfgload: setenv mesontimer "0"
cfgload: setenv nographics "0"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv condev "console=ttyS0,115200n8 console=tty0 consoleblank=0"   #
cfgload: setenv verbosity "1"
cfgload: setenv bootargs "root=/dev/mmcblk0p2 rootwait rootflags=data=writeback
cfgload: setenv loadaddr "0x11000000"
cfgload: setenv dtb_loadaddr "0x1000000"
cfgload: setenv initrd_loadaddr "0x13000000"
cfgload: fatload mmc 0:1 ${initrd_loadaddr} uInitrd
reading uInitrd
4872289 bytes read in 112 ms (41.5 MiB/s)
cfgload: fatload mmc 0:1 ${loadaddr} zImage
reading zImage
12603184 bytes read in 289 ms (41.6 MiB/s)
cfgload: fatload mmc 0:1 ${dtb_loadaddr} dtb/meson64_odroidc2.dtb
reading dtb/meson64_odroidc2.dtb
29164 bytes read in 5 ms (5.6 MiB/s)
cfgload: fdt addr ${dtb_loadaddr}
cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/c
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /ao
cfgload: booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4872225 Bytes = 4.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 73a8f000, end 73f34821 ... OK
   Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK

Starting kernel ...

uboot time: 3465733 us

Debian GNU/Linux 8 odroidc2 ttyS0

odroidc2 login: root
Password:
Last login: Fri Oct 28 23:21:25 CEST 2016 on ttyS0
Linux odroidc2 3.14.79-odroidc2 #2 SMP PREEMPT Fri Oct 7 11:25:40 CEST 2016 aarc
  ___      _           _     _    ____ ____
 / _ \  __| |_ __ ___ (_) __| |  / ___|___ \
| | | |/ _` | '__/ _ \| |/ _` | | |     __) |
| |_| | (_| | | | (_) | | (_| | | |___ / __/
 \___/ \__,_|_|  \___/|_|\__,_|  \____|_____|


Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.14.79-odroidc2
System load:   0.82             Up time:       14 sec
Memory usage:  7 % of 1719Mb    IP:            192.168.1.32
CPU temp:      36°C
Usage of /:    4% of 29G

root@odroidc2:~# htop

  1  [|                         0.3%]     Tasks: 17, 3 thr; 1 running
  2  [                          0.0%]     Load average: 0.60 0.19 0.07
  3  [                          0.0%]     Uptime: 00:00:44
  4  [|                         0.2%]
  Mem[|||||               118/1719MB]
  Swp[                       0/127MB]

  PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
  492 root       20   0  7684  3736   640 S  0.2  0.2  0:00.93 /usr/sbin/haveged
    1 root       20   0  7252  4488  1888 S  0.0  0.3  0:01.73 /sbin/init
  207 root       20   0  8356  2052  1772 S  0.0  0.1  0:00.30 /lib/systemd/syst
  211 root       20   0 11204  1700  1096 S  0.0  0.1  0:00.23 /lib/systemd/syst
  493 root       20   0  5188  1272  1004 S  0.0  0.1  0:00.00 /usr/sbin/cron -f
  498 root       20   0  8272  2940  2308 S  0.0  0.2  0:00.06 /usr/sbin/sshd -D
  501 root       20   0  3788  1524  1196 S  0.0  0.1  0:00.02 /lib/systemd/syst
  533 messagebu  20   0  5304  1592  1228 S  0.0  0.1  0:00.05 /usr/bin/dbus-dae
  542 ntp        20   0  6252  2160  1572 S  0.0  0.1  0:00.02 /usr/sbin/ntpd -p
  589 root       20   0  220M  2116  1444 S  0.0  0.1  0:00.01 /usr/sbin/rsyslog
  590 root       20   0  220M  2116  1444 S  0.0  0.1  0:00.00 /usr/sbin/rsyslog
  591 root       20   0  220M  2116  1444 S  0.0  0.1  0:00.02 /usr/sbin/rsyslog
  569 root       20   0  220M  2116  1444 S  0.0  0.1  0:00.06 /usr/sbin/rsyslog
  611 root       20   0  4000   876   728 S  0.0  0.0  0:00.01 /sbin/agetty --no
root@odroidc2:~# reboot
[   57.158580] reboot: Restarting system
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State ON
INFO:      AffInst: Level 0, MPID 0x2, State ON
INFO:      AffInst: Level 0, MPID 0x3, State ON
bl31 rebâ–’GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
TE: 59406
no sdio debug board detected

BL2 Built : 11:44:26, Nov 25 2015.
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK.
Run bl30...
Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size: 0x000012e0
Wait bl30...Done
Sending bl301.....OK.
Run bl301...
d bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size: 0x00066de0
: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.174199 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Oct 07 2016 - 06:32:17)

DRAM:  2 GiB
Relocation Offset is: 76f3f000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFD636D
MAC : 00:1e:06:33:af:ed
BID : HKC2211608
-------------------------------------------------
register usb cfg[1][0] = 0000000077f97338
register usb cfg[0][1] = 0000000077f97360
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f37d30
aml_priv->desc_buf = 0x0000000073f39ec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 32 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
4385 bytes read in 3 ms (1.4 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv m "1080p60hz" # Progressive 60Hz
cfgload:
cfgload: setenv cec "cecf"
cfgload: setenv m_bpp "24"
cfgload: setenv mesontimer "0"
cfgload: setenv nographics "0"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv condev "console=ttyS0,115200n8 console=tty0 consoleblank=0"   # on both
cfgload: setenv verbosity "1"
cfgload: setenv bootargs "root=/dev/mmcblk0p2 rootwait rootflags=data=writeback rw ${condev} no_console_suspend hdmimode=${m} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes loglevel=${verbosity} net.ifnames=0"
cfgload: setenv loadaddr "0x11000000"
cfgload: setenv dtb_loadaddr "0x1000000"
cfgload: setenv initrd_loadaddr "0x13000000"
cfgload: fatload mmc 0:1 ${initrd_loadaddr} uInitrd
reading uInitrd
4872289 bytes read in 112 ms (41.5 MiB/s)
cfgload: fatload mmc 0:1 ${loadaddr} zImage
reading zImage
12603184 bytes read in 289 ms (41.6 MiB/s)
cfgload: fatload mmc 0:1 ${dtb_loadaddr} dtb/meson64_odroidc2.dtb
reading dtb/meson64_odroidc2.dtb
29164 bytes read in 5 ms (5.6 MiB/s)
cfgload: fdt addr ${dtb_loadaddr}
cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
cfgload: booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4872225 Bytes = 4.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 73a8f000, end 73f34821 ... OK
   Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK

Starting kernel ...

uboot time: 3465795 us

Debian GNU/Linux 8 odroidc2 ttyS0

odroidc2 login: root
Password:

Login incorrect
odroidc2 login: root
Password:
Last login: Fri Oct 28 23:21:59 CEST 2016 on ttyS0
Linux odroidc2 3.14.79-odroidc2 #2 SMP PREEMPT Fri Oct 7 11:25:40 CEST 2016 aarch64
  ___      _           _     _    ____ ____
 / _ \  __| |_ __ ___ (_) __| |  / ___|___ \
| | | |/ _` | '__/ _ \| |/ _` | | |     __) |
| |_| | (_| | | | (_) | | (_| | | |___ / __/
 \___/ \__,_|_|  \___/|_|\__,_|  \____|_____|


Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.14.79-odroidc2
System load:   0.42             Up time:       58 sec
Memory usage:  7 % of 1719Mb    IP:            192.168.1.32
CPU temp:      38°C
Usage of /:    4% of 29G

root@odroidc2:~# shutdown now
[   70.608542] reboot: Power down
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State ON
INFO:      AffInst: Level 0, MPID 0x2, State ON
INFO:      AffInst: Level 0, MPID 0x3, State ON
ERprocess cCEC cfg:0x2f
set vddee to 0x0352mv
06f1932000000000GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
TE: 84948
no sdio debug board detected

BL2 Built : 11:44:26, Nov 25 2015.
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK.
Run bl30...
Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size: 0x000012e0
Wait bl30...Done
Sending bl301.....OK.
Run bl301...
d bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: Load bl33 from eMMC, src: 0x00034200, des: 0x01000000, size: 0x00066de0
ef be ad de d f0 ad ba ef be ad de not ES chip
[0.199915 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Oct 07 2016 - 06:32:17)

DRAM:  2 GiB
Relocation Offset is: 76f3f000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFD636D
MAC : 00:1e:06:33:af:ed
BID : HKC2211608
-------------------------------------------------
register usb cfg[1][0] = 0000000077f97338
register usb cfg[0][1] = 0000000077f97360
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f37d30
aml_priv->desc_buf = 0x0000000073f39ec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 32 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
4385 bytes read in 3 ms (1.4 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv m "1080p60hz" # Progressive 60Hz
cfgload:
cfgload: setenv cec "cecf"
cfgload: setenv m_bpp "24"
cfgload: setenv mesontimer "0"
cfgload: setenv nographics "0"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv condev "console=ttyS0,115200n8 console=tty0 consoleblank=0"   # on both
cfgload: setenv verbosity "1"
cfgload: setenv bootargs "root=/dev/mmcblk0p2 rootwait rootflags=data=writeback rw ${condev} no_console_suspend hdmimode=${m} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes loglevel=${verbosity} net.ifnames=0"
cfgload: setenv loadaddr "0x11000000"
cfgload: setenv dtb_loadaddr "0x1000000"
cfgload: setenv initrd_loadaddr "0x13000000"
cfgload: fatload mmc 0:1 ${initrd_loadaddr} uInitrd
reading uInitrd
4872289 bytes read in 113 ms (41.1 MiB/s)
cfgload: fatload mmc 0:1 ${loadaddr} zImage
reading zImage
12603184 bytes read in 290 ms (41.4 MiB/s)
cfgload: fatload mmc 0:1 ${dtb_loadaddr} dtb/meson64_odroidc2.dtb
reading dtb/meson64_odroidc2.dtb
29164 bytes read in 6 ms (4.6 MiB/s)
cfgload: fdt addr ${dtb_loadaddr}
cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
cfgload: booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4872225 Bytes = 4.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 73a8f000, end 73f34821 ... OK
   Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK

Starting kernel ...

uboot time: 3495877 us

Debian GNU/Linux 8 odroidc2 ttyS0

odroidc2 login: root
Password:
Last login: Fri Oct 28 23:23:56 CEST 2016 on ttyS0
Linux odroidc2 3.14.79-odroidc2 #2 SMP PREEMPT Fri Oct 7 11:25:40 CEST 2016 aarch64
  ___      _           _     _    ____ ____
 / _ \  __| |_ __ ___ (_) __| |  / ___|___ \
| | | |/ _` | '__/ _ \| |/ _` | | |     __) |
| |_| | (_| | | | (_) | | (_| | | |___ / __/
 \___/ \__,_|_|  \___/|_|\__,_|  \____|_____|


Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.14.79-odroidc2
System load:   0.59             Up time:       12 sec
Memory usage:  7 % of 1719Mb    IP:            192.168.1.32
CPU temp:      38°C
Usage of /:    4% of 29G

root@odroidc2:~# reboot
[   22.288440] reboot: Restarting system
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State ON
INFO:      AffInst: Level 0, MPID 0x2, State ON
INFO:      AffInst: Level 0, MPID 0x3, State ON
bl31 rebâ–’GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
TE: 59322
no sdio debug board detected

BL2 Built : 11:44:26, Nov 25 2015.
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK.
Run bl30...
Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size: 0x000012e0
Wait bl30...Done
Sending bl301.....OK.
Run bl301...
d bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size: 0x00066de0
: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.174120 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Oct 07 2016 - 06:32:17)

DRAM:  2 GiB
Relocation Offset is: 76f3f000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFD636D
MAC : 00:1e:06:33:af:ed
BID : HKC2211608
-------------------------------------------------
register usb cfg[1][0] = 0000000077f97338
register usb cfg[0][1] = 0000000077f97360
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f37d30
aml_priv->desc_buf = 0x0000000073f39ec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 32 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
4385 bytes read in 3 ms (1.4 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv m "1080p60hz" # Progressive 60Hz
cfgload:
cfgload: setenv cec "cecf"
cfgload: setenv m_bpp "24"
cfgload: setenv mesontimer "0"
cfgload: setenv nographics "0"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv condev "console=ttyS0,115200n8 console=tty0 consoleblank=0"   # on both
cfgload: setenv verbosity "1"
cfgload: setenv bootargs "root=/dev/mmcblk0p2 rootwait rootflags=data=writeback rw ${condev} no_console_suspend hdmimode=${m} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes loglevel=${verbosity} net.ifnames=0"
cfgload: setenv loadaddr "0x11000000"
cfgload: setenv dtb_loadaddr "0x1000000"
cfgload: setenv initrd_loadaddr "0x13000000"
cfgload: fatload mmc 0:1 ${initrd_loadaddr} uInitrd
reading uInitrd
4872289 bytes read in 112 ms (41.5 MiB/s)
cfgload: fatload mmc 0:1 ${loadaddr} zImage
reading zImage
12603184 bytes read in 289 ms (41.6 MiB/s)
cfgload: fatload mmc 0:1 ${dtb_loadaddr} dtb/meson64_odroidc2.dtb
reading dtb/meson64_odroidc2.dtb
29164 bytes read in 4 ms (7 MiB/s)
cfgload: fdt addr ${dtb_loadaddr}
cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
cfgload: booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4872225 Bytes = 4.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 73a8f000, end 73f34821 ... OK
   Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK

Starting kernel ...

uboot time: 3465603 us

Debian GNU/Linux 8 odroidc2 ttyS0

odroidc2 login: root
Password:
Last login: Fri Oct 28 23:24:12 CEST 2016 on ttyS0
Linux odroidc2 3.14.79-odroidc2 #2 SMP PREEMPT Fri Oct 7 11:25:40 CEST 2016 aarch64
  ___      _           _     _    ____ ____
 / _ \  __| |_ __ ___ (_) __| |  / ___|___ \
| | | |/ _` | '__/ _ \| |/ _` | | |     __) |
| |_| | (_| | | | (_) | | (_| | | |___ / __/
 \___/ \__,_|_|  \___/|_|\__,_|  \____|_____|


Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.14.79-odroidc2
System load:   0.52             Up time:       12 sec
Memory usage:  7 % of 1719Mb    IP:            192.168.1.32
CPU temp:      38°C
Usage of /:    4% of 29G

root@odroidc2:~# apt-get update
Get:1 http://apt.armbian.com jessie InRelease [8,683 B]
Get:2 http://security.debian.org jessie/updates InRelease [63.1 kB]
Ign http://httpredir.debian.org jessie InRelease
Get:3 http://apt.armbian.com jessie/main arm64 Packages [8,532 B]
Get:4 http://httpredir.debian.org jessie-updates InRelease [145 kB]
Get:5 http://security.debian.org jessie/updates/main arm64 Packages [299 kB]
Get:6 http://httpredir.debian.org jessie-backports InRelease [166 kB]
Get:7 http://apt.armbian.com jessie/utils arm64 Packages [2,407 B]
Get:8 http://apt.armbian.com jessie/jessie-desktop arm64 Packages [14 B]
Get:9 http://security.debian.org jessie/updates/contrib arm64 Packages [1,138 B]
Hit http://httpredir.debian.org jessie Release.gpg
Get:10 http://security.debian.org jessie/updates/non-free arm64 Packages [14 B]
Get:11 http://httpredir.debian.org jessie-updates/main arm64 Packages/DiffIndex [5,932 B]
Get:12 http://security.debian.org jessie/updates/contrib Translation-en [1,211 B]
Get:13 http://security.debian.org jessie/updates/main Translation-en [168 kB]
Get:14 http://security.debian.org jessie/updates/non-free Translation-en [14 B]
Get:15 http://httpredir.debian.org jessie-updates/non-free arm64 Packages/DiffIndex [736 B]
Get:16 http://httpredir.debian.org jessie-updates/contrib Translation-en [14 B]
Get:17 http://httpredir.debian.org jessie-updates/main Translation-en/DiffIndex [2,704 B]
Get:18 http://httpredir.debian.org jessie-updates/non-free Translation-en/DiffIndex [736 B]
Hit http://httpredir.debian.org jessie Release
Get:19 http://httpredir.debian.org jessie-updates/main arm64 2016-10-25-2111.01.pdiff [524 B]
Get:20 http://httpredir.debian.org jessie-updates/main arm64 2016-10-25-2111.01.pdiff [524 B]
Get:21 http://httpredir.debian.org jessie-updates/contrib arm64 Packages [32 B]
Get:22 http://httpredir.debian.org jessie-backports/non-free arm64 Packages/DiffIndex [4,594 B]
Get:23 http://httpredir.debian.org jessie-backports/contrib Translation-en/DiffIndex [5,500 B]
Get:24 http://httpredir.debian.org jessie-backports/main Translation-en/DiffIndex [27.8 kB]
Get:25 http://httpredir.debian.org jessie-backports/main arm64 Packages/DiffIndex [27.8 kB]
Get:26 http://httpredir.debian.org jessie-backports/contrib arm64 Packages/DiffIndex [17.5 kB]
Get:27 http://httpredir.debian.org jessie-backports/non-free Translation-en/DiffIndex [9,790 B]
Hit http://httpredir.debian.org jessie/main arm64 Packages
Hit http://httpredir.debian.org jessie/contrib arm64 Packages
Ign http://apt.armbian.com jessie/jessie-desktop Translation-en_US
Ign http://apt.armbian.com jessie/jessie-desktop Translation-en
Ign http://apt.armbian.com jessie/jessie-desktop Translation-en_US.UTF-8
Ign http://apt.armbian.com jessie/main Translation-en_US
Ign http://apt.armbian.com jessie/main Translation-en
Hit http://httpredir.debian.org jessie/non-free arm64 Packages
Ign http://apt.armbian.com jessie/main Translation-en_US.UTF-8
Ign http://apt.armbian.com jessie/utils Translation-en_US
Hit http://httpredir.debian.org jessie/contrib Translation-en
Ign http://apt.armbian.com jessie/utils Translation-en
Ign http://apt.armbian.com jessie/utils Translation-en_US.UTF-8
Hit http://httpredir.debian.org jessie/main Translation-en
Hit http://httpredir.debian.org jessie/non-free Translation-en
Get:28 http://httpredir.debian.org jessie-backports/non-free arm64 2016-10-09-1513.45.pdiff [634 B]
Get:29 http://httpredir.debian.org jessie-backports/non-free arm64 2016-10-09-1513.45.pdiff [634 B]
Get:30 http://httpredir.debian.org jessie-backports/main 2016-10-09-1513.45.pdiff [4,398 B]
Get:31 http://httpredir.debian.org jessie-backports/main 2016-10-10-1510.00.pdiff [943 B]
Get:32 http://httpredir.debian.org jessie-backports/main 2016-10-11-1019.06.pdiff [110 B]
Get:33 http://httpredir.debian.org jessie-backports/main 2016-10-13-0920.21.pdiff [320 B]
Get:34 http://httpredir.debian.org jessie-backports/main 2016-10-13-2121.18.pdiff [343 B]
Get:35 http://httpredir.debian.org jessie-backports/main 2016-10-17-0322.17.pdiff [137 B]
Get:36 http://httpredir.debian.org jessie-backports/main 2016-10-17-1512.33.pdiff [6,447 B]
Get:37 http://httpredir.debian.org jessie-backports/main 2016-10-18-0313.17.pdiff [425 B]
Get:38 http://httpredir.debian.org jessie-backports/main 2016-10-22-0328.41.pdiff [33 B]
Get:39 http://httpredir.debian.org jessie-backports/main 2016-10-26-1509.08.pdiff [181 B]
Get:40 http://httpredir.debian.org jessie-backports/main 2016-10-26-1509.08.pdiff [181 B]
Get:41 http://httpredir.debian.org jessie-backports/main arm64 2016-10-07-0907.55.pdiff [802 B]
Get:42 http://httpredir.debian.org jessie-backports/main arm64 2016-10-07-1509.10.pdiff [384 B]
Get:43 http://httpredir.debian.org jessie-backports/main arm64 2016-10-08-0308.57.pdiff [246 B]
Get:44 http://httpredir.debian.org jessie-backports/main arm64 2016-10-08-0908.21.pdiff [612 B]
Get:45 http://httpredir.debian.org jessie-backports/main arm64 2016-10-08-1510.10.pdiff [510 B]
Get:46 http://httpredir.debian.org jessie-backports/main arm64 2016-10-08-2112.02.pdiff [366 B]
Get:47 http://httpredir.debian.org jessie-backports/main arm64 2016-10-09-1513.45.pdiff [3,287 B]
Get:48 http://httpredir.debian.org jessie-backports/main arm64 2016-10-09-2111.57.pdiff [2,401 B]
Get:49 http://httpredir.debian.org jessie-backports/main arm64 2016-10-10-0312.45.pdiff [2,044 B]
Get:50 http://httpredir.debian.org jessie-backports/main arm64 2016-10-10-0908.20.pdiff [233 B]
Get:51 http://httpredir.debian.org jessie-backports/main arm64 2016-10-10-2112.14.pdiff [3,177 B]
Get:52 http://httpredir.debian.org jessie-backports/main arm64 2016-10-11-0327.11.pdiff [256 B]
Get:53 http://httpredir.debian.org jessie-backports/main arm64 2016-10-11-1019.06.pdiff [115 B]
Get:54 http://httpredir.debian.org jessie-backports/main arm64 2016-10-11-1518.51.pdiff [449 B]
Get:55 http://httpredir.debian.org jessie-backports/main arm64 2016-10-12-0920.58.pdiff [1,094 B]
Get:56 http://httpredir.debian.org jessie-backports/main arm64 2016-10-11-2122.02.pdiff [644 B]
Get:57 http://httpredir.debian.org jessie-backports/main arm64 2016-10-12-2123.06.pdiff [1,972 B]
Get:58 http://httpredir.debian.org jessie-backports/main arm64 2016-10-13-0920.21.pdiff [411 B]
Get:59 http://httpredir.debian.org jessie-backports/main arm64 2016-10-14-0326.10.pdiff [1,851 B]
Get:60 http://httpredir.debian.org jessie-backports/main arm64 2016-10-14-0916.56.pdiff [2,347 B]
Get:61 http://httpredir.debian.org jessie-backports/main arm64 2016-10-14-1514.25.pdiff [654 B]
Get:62 http://httpredir.debian.org jessie-backports/main arm64 2016-10-14-2116.58.pdiff [671 B]
Get:63 http://httpredir.debian.org jessie-backports/main arm64 2016-10-15-0321.59.pdiff [1,981 B]
Get:64 http://httpredir.debian.org jessie-backports/main arm64 2016-10-15-2119.26.pdiff [1,129 B]
Get:65 http://httpredir.debian.org jessie-backports/main arm64 2016-10-16-0330.25.pdiff [2,504 B]
Get:66 http://httpredir.debian.org jessie-backports/main arm64 2016-10-17-0915.45.pdiff [255 B]
Get:67 http://httpredir.debian.org jessie-backports/main arm64 2016-10-17-0322.17.pdiff [413 B]
Get:68 http://httpredir.debian.org jessie-backports/main arm64 2016-10-17-2112.35.pdiff [7,563 B]
Get:69 http://httpredir.debian.org jessie-backports/main arm64 2016-10-17-1512.33.pdiff [4,917 B]
Get:70 http://httpredir.debian.org jessie-backports/main arm64 2016-10-18-0313.17.pdiff [307 B]
Get:71 http://httpredir.debian.org jessie-backports/main arm64 2016-10-18-1548.58.pdiff [2,398 B]
Get:72 http://httpredir.debian.org jessie-backports/main arm64 2016-10-18-2112.09.pdiff [643 B]
Get:73 http://httpredir.debian.org jessie-backports/main arm64 2016-10-19-1513.32.pdiff [363 B]
Get:74 http://httpredir.debian.org jessie-backports/main arm64 2016-10-20-0319.49.pdiff [3,227 B]
Get:75 http://httpredir.debian.org jessie-backports/main arm64 2016-10-20-1525.06.pdiff [2,713 B]
Get:76 http://httpredir.debian.org jessie-backports/main arm64 2016-10-21-0917.15.pdiff [399 B]
Get:77 http://httpredir.debian.org jessie-backports/main arm64 2016-10-21-2119.36.pdiff [370 B]
Get:78 http://httpredir.debian.org jessie-backports/main arm64 2016-10-24-0910.56.pdiff [313 B]
Get:79 http://httpredir.debian.org jessie-backports/main arm64 2016-10-24-1509.35.pdiff [252 B]
Get:80 http://httpredir.debian.org jessie-backports/main arm64 2016-10-25-0912.51.pdiff [922 B]
Get:81 http://httpredir.debian.org jessie-backports/main arm64 2016-10-25-1508.49.pdiff [3,169 B]
Get:82 http://httpredir.debian.org jessie-backports/main arm64 2016-10-25-2111.01.pdiff [904 B]
Get:83 http://httpredir.debian.org jessie-backports/main arm64 2016-10-26-1509.08.pdiff [537 B]
Get:84 http://httpredir.debian.org jessie-backports/main arm64 2016-10-26-2109.59.pdiff [309 B]
Get:85 http://httpredir.debian.org jessie-backports/main arm64 2016-10-27-0912.15.pdiff [1,519 B]
Get:86 http://httpredir.debian.org jessie-backports/main arm64 2016-10-27-1514.42.pdiff [377 B]
Get:87 http://httpredir.debian.org jessie-backports/main arm64 2016-10-27-2108.42.pdiff [248 B]
Get:88 http://httpredir.debian.org jessie-backports/main arm64 2016-10-28-0401.32.pdiff [1,297 B]
Get:89 http://httpredir.debian.org jessie-backports/main arm64 2016-10-28-0401.32.pdiff [1,297 B]
Get:90 http://httpredir.debian.org jessie-backports/contrib arm64 2016-10-28-0401.32.pdiff [241 B]
Get:91 http://httpredir.debian.org jessie-backports/non-free 2016-10-09-1513.45.pdiff [2,468 B]
Get:92 http://httpredir.debian.org jessie-backports/contrib arm64 2016-10-28-0401.32.pdiff [241 B]
Get:93 http://httpredir.debian.org jessie-backports/non-free 2016-10-11-1019.06.pdiff [85 B]
Get:94 http://httpredir.debian.org jessie-backports/non-free 2016-10-11-1019.06.pdiff [85 B]
Fetched 1,047 kB in 11s (92.6 kB/s)
Reading package lists... Done
root@odroidc2:~# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
  armbian-firmware hostapd linux-dtb-odroidc2 linux-headers-odroidc2
  linux-image-odroidc2 linux-jessie-root-odroidc2 linux-libc-dev
  linux-u-boot-odroidc2-default sunxi-tools tzdata
10 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 24.0 MB of archives.
After this operation, 73.7 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://apt.armbian.com/ jessie/main armbian-firmware arm64 5.22 [1,308 kB]
Get:2 http://httpredir.debian.org/debian/ jessie-updates/main tzdata all 2016h-0+deb8u1 [186 kB]
Get:3 http://security.debian.org/ jessie/updates/main linux-libc-dev arm64 3.16.36-1+deb8u2 [1,009 kB]
Get:4 http://apt.armbian.com/ jessie/utils hostapd arm64 1:2.5~armbian5.23+1 [295 kB]
Get:5 http://apt.armbian.com/ jessie/main linux-dtb-odroidc2 arm64 5.23 [8,034 B]
Get:6 http://apt.armbian.com/ jessie/main linux-headers-odroidc2 arm64 5.23 [9,307 kB]
Get:7 http://apt.armbian.com/ jessie/main linux-image-odroidc2 arm64 5.23 [11.4 MB]
Get:8 http://apt.armbian.com/ jessie/main linux-jessie-root-odroidc2 arm64 5.23 [306 kB]
Get:9 http://apt.armbian.com/ jessie/main linux-u-boot-odroidc2-default arm64 5.23 [221 kB]
Get:10 http://apt.armbian.com/ jessie/utils sunxi-tools arm64 1.3-1~armbian5.23+1 [31.2 kB]
Fetched 24.0 MB in 13s (1,809 kB/s)
Preconfiguring packages ...
(Reading database ... 48977 files and directories currently installed.)
Preparing to unpack .../tzdata_2016h-0+deb8u1_all.deb ...
Unpacking tzdata (2016h-0+deb8u1) over (2016f-0+deb8u1) ...
Setting up tzdata (2016h-0+deb8u1) ...

Current default time zone: 'Europe/Ljubljana'
Local time is now:      Fri Oct 28 23:26:03 CEST 2016.
Universal Time is now:  Fri Oct 28 21:26:03 UTC 2016.
Run 'dpkg-reconfigure tzdata' if you wish to change it.

(Reading database ... 48980 files and directories currently installed.)
Preparing to unpack .../armbian-firmware_5.22_arm64.deb ...
Unpacking armbian-firmware (5.22) over (5.21) ...
Preparing to unpack .../hostapd_1%3a2.5~armbian5.23+1_arm64.deb ...
Unpacking hostapd (1:2.5~armbian5.23+1) over (1:2.5~armbian5.21+1) ...
Preparing to unpack .../linux-dtb-odroidc2_5.23_arm64.deb ...
Unpacking linux-dtb-odroidc2 (5.23) over (5.21) ...
Preparing to unpack .../linux-headers-odroidc2_5.23_arm64.deb ...
Unpacking linux-headers-odroidc2 (5.23) over (5.21) ...
Preparing to unpack .../linux-image-odroidc2_5.23_arm64.deb ...
/etc/kernel/preinst.d/initramfs-cleanup: 17: /etc/kernel/preinst.d/initramfs-cleanup: linux-version: not found
Unpacking linux-image-odroidc2 (5.23) over (5.21) ...
Preparing to unpack .../linux-jessie-root-odroidc2_5.23_arm64.deb ...
Adding 'diversion of /etc/mpv/mpv.conf to /etc/mpv/mpv-dist.conf by linux-jessie-root-odroidc2'
Unpacking linux-jessie-root-odroidc2 (5.23) over (5.21) ...
Preparing to unpack .../linux-libc-dev_3.16.36-1+deb8u2_arm64.deb ...
Unpacking linux-libc-dev:arm64 (3.16.36-1+deb8u2) over (3.16.36-1+deb8u1) ...
Preparing to unpack .../linux-u-boot-odroidc2-default_5.23_arm64.deb ...
Unpacking linux-u-boot-odroidc2-default (5.23) over (5.21) ...
Preparing to unpack .../sunxi-tools_1.3-1~armbian5.23+1_arm64.deb ...
Unpacking sunxi-tools (1.3-1~armbian5.23+1) over (1.3-1~armbian5.21+1) ...
Processing triggers for systemd (215-17+deb8u5) ...
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for initramfs-tools (0.120+deb8u2) ...
ln: failed to create hard link ‘/boot/initrd.img-3.14.79-odroidc2.dpkg-bak’ => ‘/boot/initrd.img-3.14.79-odroidc2’: Operation not permitted
update-initramfs: Generating /boot/initrd.img-3.14.79-odroidc2
Setting up armbian-firmware (5.22) ...
Setting up hostapd (1:2.5~armbian5.23+1) ...
Setting up linux-dtb-odroidc2 (5.23) ...
Setting up linux-headers-odroidc2 (5.23) ...
Compiling headers - please wait ...
Setting up linux-image-odroidc2 (5.23) ...
update-initramfs: Generating /boot/initrd.img-3.14.79-odroidc2
Setting up linux-jessie-root-odroidc2 (5.23) ...
Setting up linux-libc-dev:arm64 (3.16.36-1+deb8u2) ...
Setting up linux-u-boot-odroidc2-default (5.23) ...
Updating u-boot on device /dev/mmcblk0
Setting up sunxi-tools (1.3-1~armbian5.23+1) ...
Processing triggers for initramfs-tools (0.120+deb8u2) ...
ln: failed to create hard link ‘/boot/initrd.img-3.14.79-odroidc2.dpkg-bak’ => ‘/boot/initrd.img-3.14.79-odroidc2’: Operation not permitted
update-initramfs: Generating /boot/initrd.img-3.14.79-odroidc2
root@odroidc2:~# reboot
[  189.448519] reboot: Restarting system
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State ON
INFO:      AffInst: Level 0, MPID 0x2, State ON
INFO:      AffInst: Level 0, MPID 0x3, State ON
bl31 rebâ–’GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
TE: 59401
no sdio debug board detected

BL2 Built : 11:44:26, Nov 25 2015.
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK.
Run bl30...
Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size: 0x000012e0
Wait bl30...Done
Sending bl301.....OK.
Run bl301...
d bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size: 0x00066de0
: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.174199 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Oct 10 2016 - 20:43:20)

DRAM:  2 GiB
Relocation Offset is: 76f3f000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFD636D
MAC : 00:1e:06:33:af:ed
BID : HKC2211608
-------------------------------------------------
register usb cfg[1][0] = 0000000077f97338
register usb cfg[0][1] = 0000000077f97360
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f37d30
aml_priv->desc_buf = 0x0000000073f39ec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
*** Warning - bad CRC, using default environment

Saving Environment to MMC...
Writing to MMC(0)... done
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 32 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Saving Environment to MMC...
Writing to MMC(0)... done
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
4385 bytes read in 3 ms (1.4 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv m "1080p60hz" # Progressive 60Hz
cfgload:
cfgload: setenv cec "cecf"
cfgload: setenv m_bpp "24"
cfgload: setenv mesontimer "0"
cfgload: setenv nographics "0"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv condev "console=ttyS0,115200n8 console=tty0 consoleblank=0"   # on both
cfgload: setenv verbosity "1"
cfgload: setenv bootargs "root=/dev/mmcblk0p2 rootwait rootflags=data=writeback rw ${condev} no_console_suspend hdmimode=${m} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes loglevel=${verbosity} net.ifnames=0"
cfgload: setenv loadaddr "0x11000000"
cfgload: setenv dtb_loadaddr "0x1000000"
cfgload: setenv initrd_loadaddr "0x13000000"
cfgload: fatload mmc 0:1 ${initrd_loadaddr} uInitrd
reading uInitrd
4877183 bytes read in 116 ms (40.1 MiB/s)
cfgload: fatload mmc 0:1 ${loadaddr} zImage
reading zImage
12603184 bytes read in 294 ms (40.9 MiB/s)
cfgload: fatload mmc 0:1 ${dtb_loadaddr} dtb/meson64_odroidc2.dtb
reading dtb/meson64_odroidc2.dtb
29164 bytes read in 5 ms (5.6 MiB/s)
cfgload: fdt addr ${dtb_loadaddr}
cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
cfgload: booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4877119 Bytes = 4.7 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 73a8e000, end 73f34b3f ... OK
   Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK

Starting kernel ...

uboot time: 3492063 us

Debian GNU/Linux 8 odroidc2 ttyS0

odroidc2 login: root
Password:
Last login: Fri Oct 28 23:24:26 CEST 2016 on ttyS0
Linux odroidc2 3.14.79-odroidc2 #5 SMP PREEMPT Sun Oct 23 16:52:51 CEST 2016 aarch64
  ___      _           _     _    ____ ____
 / _ \  __| |_ __ ___ (_) __| |  / ___|___ \
| | | |/ _` | '__/ _ \| |/ _` | | |     __) |
| |_| | (_| | | | (_) | | (_| | | |___ / __/
 \___/ \__,_|_|  \___/|_|\__,_|  \____|_____|


Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.14.79-odroidc2
System load:   0.88             Up time:       12 sec
Memory usage:  7 % of 1719Mb    IP:
CPU temp:      42°C
Usage of /:    4% of 29G

New to Armbian? Check the documentation first: docs.armbian.com

root@odroidc2:~# reboot
Terminated
[   34.169382] reboot: Restarting system
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State ON
INFO:      AffInst: Level 0, MPID 0x2, State ON
INFO:      AffInst: Level 0, MPID 0x3, State ON
bl31 rebâ–’GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
TE: 59480
no sdio debug board detected

BL2 Built : 11:44:26, Nov 25 2015.
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK.
Run bl30...
Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size: 0x000012e0
Wait bl30...Done
Sending bl301.....OK.
Run bl301...
d bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size: 0x00066de0
: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.174277 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Oct 10 2016 - 20:43:20)

DRAM:  2 GiB
Relocation Offset is: 76f3f000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFD636D
MAC : 00:1e:06:33:af:ed
BID : HKC2211608
-------------------------------------------------
register usb cfg[1][0] = 0000000077f97338
register usb cfg[0][1] = 0000000077f97360
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f37d30
aml_priv->desc_buf = 0x0000000073f39ec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 32 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
4385 bytes read in 3 ms (1.4 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv m "1080p60hz" # Progressive 60Hz
cfgload:
cfgload: setenv cec "cecf"
cfgload: setenv m_bpp "24"
cfgload: setenv mesontimer "0"
cfgload: setenv nographics "0"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv condev "console=ttyS0,115200n8 console=tty0 consoleblank=0"   # on both
cfgload: setenv verbosity "1"
cfgload: setenv bootargs "root=/dev/mmcblk0p2 rootwait rootflags=data=writeback rw ${condev} no_console_suspend hdmimode=${m} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes loglevel=${verbosity} net.ifnames=0"
cfgload: setenv loadaddr "0x11000000"
cfgload: setenv dtb_loadaddr "0x1000000"
cfgload: setenv initrd_loadaddr "0x13000000"
cfgload: fatload mmc 0:1 ${initrd_loadaddr} uInitrd
reading uInitrd
4877183 bytes read in 116 ms (40.1 MiB/s)
cfgload: fatload mmc 0:1 ${loadaddr} zImage
reading zImage
12603184 bytes read in 294 ms (40.9 MiB/s)
cfgload: fatload mmc 0:1 ${dtb_loadaddr} dtb/meson64_odroidc2.dtb
reading dtb/meson64_odroidc2.dtb
29164 bytes read in 5 ms (5.6 MiB/s)
cfgload: fdt addr ${dtb_loadaddr}
cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
cfgload: booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4877119 Bytes = 4.7 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 73a8e000, end 73f34b3f ... OK
   Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK

Starting kernel ...

uboot time: 3473645 us

 

  • Author

We used to have this problem:

https://github.com/igorpecovnik/lib/commit/3332e4bb38d89e96b77201bbde60e1da08c15ca1

 

I fixed the image afterwards. Are you using some self build or previously downloaded image? What I did today was - download Armbian_5.21_Odroidc2_Debian_jessie_3.14.79.7z - burn to eMMC - upgrade and several reboots. Everything is normal.

I know i reported it last time.

I use the 5.21 image from the site (not self build) clean install sudo dd if of bla

apt-get update apt-get upgrade

Reboot first time no problem

Reboot second time blue solid light

@id001

 

Please enable verbosity in boot.ini and provide a boot log when fails to see where it fails.

 

setenv verbosity "1"  >>>>>>  setenv verbosity "9"

 

 

n : failed to create hard link

This is normal since we have a FAT boot partition where links don't work and it's copied in this case. Perhaps we could suppress the error once.
 
@MICE
 
Thanks. It looks like an odd issue. I can't reproduce ... let's try to get more out of logs.

Here is the log with  setenv verbosity "9"

 

 

 

â–’GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0;
TE: 96110
no sdio debug board detected

BL2 Built : 11:44:26, Nov 25 2015.
gxb gfb13a3b-c2 - jcao@wonton

Board ID = 8
set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 2048MB(auto) @ 912MHz(2T)-13
DataBus test pass!
AddrBus test pass!
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
Load bl30 from eMMC, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
Sending bl30........................................OK.
Run bl30...
Load bl301 from eMMC, src: 0x0001c200, des: 0x01000000, size: 0x000012e0
Wait bl30...Done
Sending bl301.....OK.
Run bl301...
ad bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00011130


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipidLoad bl33 from eMMC, src: 0x00034200, des: 0x01000000, size: 0x00066de0
: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.210993 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL3-1: v1.0(debug):4d2e34d
NOTICE:  BL3-1: Built : 17:08:35, Oct 29 2015
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Oct 10 2016 - 20:43:20)

DRAM:  2 GiB
Relocation Offset is: 76f3f000
-------------------------------------------------
* Welcome to Hardkernel's ODROID-C2
-------------------------------------------------
CPU : AMLogic S905
S/N : HKC213254DFD636D
MAC : 00:1e:06:33:af:ed
BID : HKC2211608
-------------------------------------------------
register usb cfg[1][0] = 0000000077f97338
register usb cfg[0][1] = 0000000077f97360
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
MMC:   aml_priv->desc_buf = 0x0000000073f37d30
aml_priv->desc_buf = 0x0000000073f39ec0
SDIO Port C: 0, SDIO Port B: 1
[mmc_init] mmc init success
In:    serial
Out:   serial
Err:   serial
----------------------------------
MMC Size : 32 GB
----------------------------------
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: the partiton 'logo' is reading...

MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
hpd_state=1
[CANVAS]addr=0x3f800000 width=3840, height=1440

set hdmitx VIC = 16
hdmitx phy setting done
set hdmitx VIC = 16
hdmitx phy setting done
Error: Bad gzipped data
There is no valid bmp file at the given address
Net:   Meson_Ethernet
Hit [Enter] key twice to stop autoboot:  0
reading boot.ini
4386 bytes read in 3 ms (1.4 MiB/s)
cfgload: applying boot.ini...
cfgload: setenv m "1080p60hz" # Progressive 60Hz
cfgload:
cfgload: setenv cec "cecf"
cfgload: setenv m_bpp "24"
cfgload: setenv mesontimer "0"
cfgload: setenv nographics "0"
cfgload: setenv maxcpus "4"
cfgload: setenv max_freq "1536"  # 1.536GHz
cfgload: setenv condev "console=ttyS0,115200n8 console=tty0 consoleblank=0"   # on both
cfgload: setenv verbosity "9"
cfgload: setenv bootargs "root=/dev/mmcblk0p2 rootwait rootflags=data=writeback rw ${condev} no_console_suspend hdmimode=${m} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes loglevel=${verbosity} net.ifnames=0"
cfgload: setenv loadaddr "0x11000000"
cfgload: setenv dtb_loadaddr "0x1000000"
cfgload: setenv initrd_loadaddr "0x13000000"
cfgload: fatload mmc 0:1 ${initrd_loadaddr} uInitrd
reading uInitrd
4877162 bytes read in 115 ms (40.4 MiB/s)
cfgload: fatload mmc 0:1 ${loadaddr} zImage
reading zImage
12603184 bytes read in 297 ms (40.5 MiB/s)
cfgload: fatload mmc 0:1 ${dtb_loadaddr} dtb/meson64_odroidc2.dtb
reading dtb/meson64_odroidc2.dtb
29164 bytes read in 5 ms (5.6 MiB/s)
cfgload: fdt addr ${dtb_loadaddr}
cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
cfgload: booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4877098 Bytes = 4.7 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 73a8e000, end 73f34b2a ... OK
   Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK

Starting kernel ...

uboot time: 3513512 us
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.79-odroidc2 (root@xenial) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #5 SMP PREEMPT Sun Oct 23 16:52:51 CEST 2016
[    0.000000] CPU: AArch64 Processor [410fd034] revision 4
[    0.000000] secmon: share mem setup
[    0.000000] Reserved memory: initialized node linux,secmon, compatible id aml_secmon_memory
[    0.000000] __reserved_mem_alloc_size: linux,meson-fb
[    0.000000] fb: Reserved memory: created fb at 0x0000000078000000, size 128 MiB
[    0.000000] Reserved memory: initialized node linux,meson-fb, compatible id amlogic, fb-memory
[    0.000000] __reserved_mem_alloc_size: linux,di
[    0.000000] DI reserved memory: created CMA memory pool at 0x0000000076200000, size 30 MiB
[    0.000000] Reserved memory: initialized node linux,di, compatible id amlogic, di-mem
[    0.000000] __reserved_mem_alloc_size: linux,ion-dev
[    0.000000] linux,ion-dev add multi user:ffffffc001c4c650
[    0.000000] ion_dev mem setup
[    0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
[    0.000000] ppmgr share mem setup
[    0.000000] linux,ion-dev add multi user:ffffffc001c550a8
[    0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
[    0.000000] __reserved_mem_alloc_size: linux,codec_mm_cma
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000067c00000, size 188 MiB
[    0.000000] Reserved memory: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
[    0.000000] __reserved_mem_alloc_size: linux,picdec
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000064c00000, size 48 MiB
[    0.000000] Reserved memory: initialized node linux,picdec, compatible id shared-dma-pool
[    0.000000] __reserved_mem_alloc_size: linux,codec_mm_reserved
[    0.000000] codec_mm:vdec: reserved mem setup
[    0.000000] Reserved memory: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
[    0.000000] cma: Reserved 8 MiB at 60000000
[    0.000000] On node 0 totalpages: 486912
[    0.000000]   Normal zone: 8568 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 486912 pages, LIFO batch:31
[    0.000000] psci: probing function IDs from device-tree
[    0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc074197000 s19712 r8192 d21248 u49152
[    0.000000] pcpu-alloc: s19712 r8192 d21248 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 478344
[    0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait rootflags=data=writeback rw console=ttyS0,115200n8 console=tty0 consoleblank=0 no_console_suspend hdmimode=1080p60hz m_bpp=24 vout= fsck.repair=yes loglevel=9 net.ifnames=0
[    0.000000] logo: get hdmimode: 1080p60hz
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Memory: 1505020K/1947648K available (7906K kernel code, 871K rwdata, 2648K rodata, 875K init, 3164K bss, 442628K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffff8040000000   (  1024 MB)
[    0.000000]     vmemmap : 0xffffff8040010000 - 0xffffff80421d0000   (    33 MB)
[    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc078000000   (  1920 MB)
[    0.000000]       .init : 0xffffffc001ad0000 - 0xffffffc001baad00   (   876 kB)
[    0.000000]       .text : 0xffffffc001080000 - 0xffffffc001acfb44   ( 10559 kB)
[    0.000000]       .data : 0xffffffc001bab000 - 0xffffffc001c84f30   (   872 kB)
[    0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[    0.000193] Console: colour dummy device 80x25
[    0.000672] console [tty0] enabled
[    0.003034] allocated 8388608 bytes of page_cgroup
[    0.003043] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.003062] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.003081] pid_max: default: 32768 minimum: 301
[    0.003164] Security Framework initialized
[    0.003192] AppArmor: AppArmor initialized
[    0.003228] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003241] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003670] Initializing cgroup subsys debug
[    0.003684] Initializing cgroup subsys memory
[    0.003701] Initializing cgroup subsys devices
[    0.003714] Initializing cgroup subsys freezer
[    0.003724] Initializing cgroup subsys net_cls
[    0.003733] Initializing cgroup subsys blkio
[    0.003742] Initializing cgroup subsys perf_event
[    0.003755] Initializing cgroup subsys net_prio
[    0.003764] Initializing cgroup subsys hugetlb
[    0.003808] ftrace: allocating 27653 entries in 109 pages
[    0.027685] /cpus/cpu@0: Missing clock-frequency property
[    0.027716] /cpus/cpu@1: Missing clock-frequency property
[    0.027728] /cpus/cpu@2: Missing clock-frequency property
[    0.027740] /cpus/cpu@3: Missing clock-frequency property
[    0.027753] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[    0.069292] Meson chip version = RevC (1F:C - 0:0)
[    0.088236] CPU1: Booted secondary processor
[    0.108212] CPU2: Booted secondary processor
[    0.128222] CPU3: Booted secondary processor
[    0.128274] Brought up 4 CPUs
[    0.128302] SMP: Total of 4 processors activated.
[    0.128808] devtmpfs: initialized
[    0.140299] pinctrl core: initialized pinctrl subsystem
[    0.140577] regulator-dummy: no parameters
[    0.142140] device-tree: Duplicate name in efusekey, renamed to "key0#1"
[    0.142168] device-tree: Duplicate name in efusekey, renamed to "key1#1"
[    0.142195] device-tree: Duplicate name in efusekey, renamed to "key2#1"
[    0.142223] device-tree: Duplicate name in efusekey, renamed to "key3#1"
[    0.144009] NET: Registered protocol family 16
[    0.144651] register canvas platform driver
[    0.144662] codec:ignore bus ops for cpu=25
[    0.144670] codec:ignore bus ops for cpu=29
[    0.144678] codec:register amports ops for bus[0]
[    0.144686] codec:register amports ops for bus[4]
[    0.144693] codec:register amports ops for bus[3]
[    0.144700] codec:register amports ops for bus[2]
[    0.144708] codec:register amports ops for bus[1]
[    0.144715] codec:register amports ops for bus[13]
[    0.144723] codec:register amports ops for bus[2]
[    0.144731] codec:register amports ops for bus[14]
[    0.144753] register rdma platform driver
[    0.145065] vdso: 2 pages (1 code, 1 data) at base ffffffc001bb2000
[    0.145098] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.145621] DMA: preallocated 256 KiB pool for atomic allocations
[    0.146824] software IO TLB [mem 0x5c800000-0x5cc00000] (4MB) mapped at [ffffffc05c800000-ffffffc05cbfffff]
[    0.146837] Serial: AMBA PL011 UART driver
[    0.146924] hdmitx: system: amhdmitx_init
[    0.146932] hdmitx: system: Ver: 2014May6
[    0.146964] tv_vout: tv_init_module
[    0.146976] tv_vout: major number 254 for disp
[    0.146984] vout_notify: vout_register_server
[    0.146992] tv_vout: register tv module server ok
[    0.147017] codec_mm:codec_mm_module_init
[    0.147123] gxbb clk HIU base is 0xffffff800004c000
[    0.147132] gxbb clk ao base is 0xffffff800004e000
[    0.147171] register mpll_clk_out0 success done
[    0.147182] register mpll_clk_out1 success done
[    0.147194] register mpll_clk_out2 success done
[    0.147361] register sys pll success done
[    0.147405] clkrate [ xtal   ] : 24000000Hz
[    0.147414] clkrate [ 32Khz  ] : 32000Hz
[    0.147422] clkrate [ clk81  ] : 166666666Hz
[    0.147430] clkrate [ fixed_pll      ] : 2000000000Hz
[    0.147438] clkrate [ fclk_div2      ] : 1000000000Hz
[    0.147446] clkrate [ fclk_div3      ] : 666666000Hz
[    0.147454] clkrate [ fclk_div4      ] : 500000000Hz
[    0.147462] clkrate [ fclk_div5      ] : 400000000Hz
[    0.147470] clkrate [ fclk_div7      ] : 285714000Hz
[    0.147499] gxbb clock initialization complete
[    0.147676] msr_clk_reg0=ffffff800005a75c,msr_clk_reg2=ffffff800005c764
[    0.148546] amlogic iomap probe done
[    0.148797] Init pinux probe!
[    0.149537] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
[    0.149787] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb8)
[    0.149807] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb8)
[    0.149871] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb8)
[    0.149891] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb8)
[    0.150071] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 0
[    0.150461] codec:codec map io source 0x00000000c1100000,size=1048576 to 0xffffff8000600000
[    0.150481] codec:codec map io source 0x00000000c8820000,size=65536 to 0xffffff80001a0000
[    0.150499] codec:codec map io source 0x00000000c883c000,size=8192 to 0xffffff8000188000
[    0.150528] codec:codec map io source 0x00000000c8100000,size=1048576 to 0xffffff8000780000
[    0.150549] codec:codec map io source 0x00000000d0100000,size=262144 to 0xffffff8000900000
[    0.150566] codec:codec map io source 0x00000000c8838000,size=1024 to 0xffffff8000186000
[    0.150626] codec_mm has 2 memory regions
[    0.150641] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma ok
[    0.150655] codec_mm:codec_mm_reserved_init 0000000060b00000->0000000064c00000
[    0.150668] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_reserved ok
[    0.150679] codec_mm:codec_mm_probe mem init done
[    0.150690] codec_mm:add reserve memory 0000000060b00000(aligned 0000000060b00000) size=4100000(aligned 4100000)
[    0.150716] codec_mm has 2 memory regions
[    0.150727] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma ok
[    0.150740] codec_mm:codec_mm_reserved_init 0000000060b00000->0000000064c00000
[    0.150752] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_reserved ok
[    0.150763] codec_mm:codec_mm reserved memory probed done
[    0.150771] codec_mm:codec_mm_probe ok
[    0.151335] VPU driver version: v01
[    0.151344] vpu driver detect cpu type: gxbaby
[    0.151359] load vpu_clk in dts: 666667000Hz(7)
[    0.151384] vpu_probe OK
[    0.151572] hdmitx: system: amhdmitx_probe
[    0.151777] hdmitx hpd irq = 89
[    0.151967] hdmitx20: Mapped PHY: 0xc0800000
[    0.151978] hdmitx20: Mapped PHY: 0xc1104400
[    0.151999] hdmitx20: Mapped PHY: 0xc8100000
[    0.152008] hdmitx20: Mapped PHY: 0xc8834000
[    0.152017] hdmitx20: Mapped PHY: 0xc883a000
[    0.152025] hdmitx20: Mapped PHY: 0xc883c000
[    0.152037] hdmitx20: Mapped PHY: 0xd0100000
[    0.152046] hdmitx20: Mapped PHY: 0xda83a000
[    0.152060] hdmitx: alread display in uboot 0x10
[    0.152086] avmute set to 1
[    0.152411] canvas_probe reg=00000000c8838000,size=400
[    0.152427] canvas maped reg_base =ffffff8000192000
[    0.155684] rdma_probe
[    0.185517] bio: create slab <bio-0> at 0
[    0.185977] SCSI subsystem initialized
[    0.186127] usbcore: registered new interface driver usbfs
[    0.186163] usbcore: registered new interface driver hub
[    0.186218] usbcore: registered new device driver usb
[    0.186278] media: Linux media interface: v0.10
[    0.186309] Linux video capture interface: v2.00
[    0.186360] pps_core: LinuxPPS API ver. 1 registered
[    0.186369] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.186390] PTP clock support registered
[    0.186544] logo: logo_init
[    0.186556] tv_vout: tv_set_current_vmode[696]fps_target_mode=12
[    0.186567] tv_vout: mode is 12,sync_duration_den=1,sync_duration_num=60
[    0.186581] switch_vpu_mem_pd: vencp ON
[    0.186590] tv_vout: TV mode 1080p60hz selected.
[    0.186599] tv_vout: already display in uboot
[    0.186606] tv_vout: new mode =1080p60hz set ok
[    0.186614] vout_serve: vinfo mode is: 1080p60hz
[    0.186625] switch_vpu_mem_pd: viu_osd1 ON
[    0.186633] switch_vpu_mem_pd: viu_osd2 ON
[    0.186641] switch_vpu_mem_pd: viu_osd_scale ON
[    0.186780] osd_rdma: osd_rdma_init: rmda_table p=0x60041000,op=0x60041000 , v=0xffffff80001b1000
[    0.186833] Advanced Linux Sound Architecture Driver Initialized.
[    0.187131] Bluetooth: Core ver 2.18
[    0.187155] NET: Registered protocol family 31
[    0.187165] Bluetooth: HCI device and connection manager initialized
[    0.187178] Bluetooth: HCI socket layer initialized
[    0.187189] Bluetooth: L2CAP socket layer initialized
[    0.187212] Bluetooth: SCO socket layer initialized
[    0.187226] NetLabel: Initializing
[    0.187233] NetLabel:  domain hash size = 128
[    0.187240] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.187283] NetLabel:  unlabeled traffic allowed by default
[    0.187782] Switched to clocksource arch_sys_counter
[    0.208271] FS-Cache: Loaded
[    0.208409] CacheFiles: Loaded
[    0.208532] AppArmor: AppArmor Filesystem Enabled
[    0.212425] NET: Registered protocol family 2
[    0.212904] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.213000] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.213192] TCP: Hash tables configured (established 16384 bind 16384)
[    0.213264] TCP: reno registered
[    0.213276] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.213317] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.213487] NET: Registered protocol family 1
[    0.213653] Unpacking initramfs...
[    0.366187] Freeing initrd memory: 4760K (ffffffc073a8e000 - ffffffc073f34000)
[    0.366881] kvm [1]: interrupt-controller@c4304000 IRQ25
[    0.367058] kvm [1]: timer IRQ27
[    0.367073] kvm [1]: Hyp mode initialized successfully
[    0.367616] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.367687] audit: initializing netlink subsys (disabled)
[    0.367737] audit: type=2000 audit(0.350:1): initialized
[    0.368233] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.372237] VFS: Disk quotas dquot_6.5.2
[    0.372382] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.373601] msgmni has been set to 3436
[    0.374416] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.374486] io scheduler noop registered
[    0.374495] io scheduler deadline registered
[    0.374513] io scheduler cfq registered (default)
[    0.396730] meson-rng c8834000.rng: hwrng registered
[    0.398814] loop: module loaded
[    0.399084] zram: Created 1 device(s) ...
[    0.399396] mtdoops: mtd device (mtddev=name/number) must be supplied
[    0.406832] libphy: stmmac: probed
[    0.406855] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    0.406865] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[    0.407155] usbcore: registered new interface driver cdc_ether
[    0.407206] usbcore: registered new interface driver cdc_ncm
[    0.407303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.407314] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[    0.407393] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.407454] usbcore: registered new interface driver cdc_acm
[    0.407464] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.407508] usbcore: registered new interface driver usb-storage
[    0.407591] usbcore: registered new interface driver usbserial
[    0.407928] mousedev: PS/2 mouse device common for all mice
[    0.408166] i2c /dev entries driver
[    0.408452] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[    0.408486] cpufreq-hotplug: cpufreq_gov_dbs_init: assumes CONFIG_NO_HZ
[    0.408706] ledtrig-cpu: registered to indicate activity on CPUs
[    0.408863] usbcore: registered new interface driver usbhid
[    0.408873] usbhid: USB HID core driver
[    0.409064] ashmem: initialized
[    0.409163] logger: created 256K log 'log_main'
[    0.409253] logger: created 256K log 'log_events'
[    0.409340] logger: created 256K log 'log_radio'
[    0.409428] logger: created 256K log 'log_system'
[    0.409672] ==uart0 reg addr = ffffff80001de4c0
[    0.409698] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[    1.897985] console [ttyS0] enabled
[    1.901594] ==uart1 reg addr = ffffff80001f24c0
[    1.905920] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[    1.915246] enter  cpufreq
[    1.917736] probe  cpufreq okay
[    1.961134] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
[    1.966621] dwc_otg: Core Release: 3.10a
[    1.967877] dwc_otg: Setting default values for core params
[    1.973399] dwc_otg: curmode: 1, host_only: 1
[    1.979886] dwc_otg: Using Buffer DMA mode
[    1.981758] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    1.986846] dwc_otg: Working on port type = HOST
[    1.991611] dwc_otg dwc2_b: DWC OTG Controller
[    1.995833] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
[    2.002575] dwc_otg dwc2_b: irq 63, io mem 0x00000000
[    2.007547] dwc_otg: -------hcd->flags.d32 = 0
[    2.011976] dwc_otg: Init: Port Power? op_state=1
[    2.016602] dwc_otg: Init1: Power Port (0)
[    2.021110] hub 1-0:1.0: USB hub found
[    2.024383] hub 1-0:1.0: 1 port detected
[    2.028475] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
[    2.048271] dwc_otg: Core Release: 3.10a
[    2.048293] dwc_otg: Setting default values for core params
[    2.052082] dwc_otg: curmode: 1, host_only: 0
[    2.060581] dwc_otg: Using Buffer DMA mode
[    2.060602] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.065531] dwc_otg: Working on port type = OTG
[    2.070024] dwc_otg: Current port type: SLAVE
[    2.074396] dwc_otg dwc2_a: DWC OTG Controller
[    2.078743] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
[    2.085467] dwc_otg dwc2_a: irq 62, io mem 0x00000000
[    2.090790] hub 2-0:1.0: USB hub found
[    2.094181] hub 2-0:1.0: 1 port detected
[    2.098164] dwc_otg: Dedicated Tx FIFOs mode
[    2.102435] dwc_otg: using timer detectid change, ffffffc05d9e3000
[    2.108666] BLASTER Driver Init
[    2.111619] secmon has 1 memory regions
[    2.115315] secmon: share in base: 0xffffff8000464000, share out base: 0xffffff8000466000
[    2.123417] secmon secmon: assigned reserved memory node linux,secmon ok
[    2.130095] secmon: probe done
[    2.133159] storage: storage in base: 0xffffff8001700000
[    2.138332] storage: storage out base: 0xffffff8001780000
[    2.143674] storage: storage block base: 0xffffff8001800000
[    2.149201] storage: probe done!
[    2.152430] Error: Driver 'ICPlus IP175C' is already registered, aborting...
[    2.159377] libphy: ICPlus IP175C: Error -16 in registering driver
[    2.165953] aml_sd_emmc_probe: line 2954
[    2.169383] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[    2.178910] aml_sd_emmc_reg_init 677
[    2.182207] pdata->caps 60007
[    2.185076] pdata->caps2 0
[    2.187749] get property:                ocr_avail, value:0x00200080
[    2.194050] get property:                    f_min, value:0x00061a80
[    2.200386] get property:                    f_max, value:0x0510ff40
[    2.206637] get property:             max_req_size, value:0x00020000
[    2.212938] get property:                   irq_in, value:0x00000003
[    2.219236] get property:                  irq_out, value:0x00000005
[    2.225526] get property:              power_level, value:0x00000001
[    2.231864] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[    2.237795] get property:                  gpio_cd, str:
[    2.242951] get property:               gpio_power, str:
[    2.248219] get property:                  pinname, str:sd
[    2.253645] get property:                 jtag_pin, str:
[    2.258909] get property:                card_type, value:0x00000005
[    2.265202] get property:                gpio_dat3, str:
[    2.270468] get property:               gpio_volsw, str:
[    2.337804] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    2.337844] aml_sd_emmc_probe: line 2954
[    2.347868] [aml_is_card_insert] card IN

[    2.347912] [aml_is_card_insert] card IN
[    2.347912] [    2.353917] normal card in
[    2.356919] aml_sd_emmc_reg_init 677
[    2.360231] pdata->caps 80000d47
[    2.363331] pdata->caps2 80a1
[    2.366252] get property:                ocr_avail, value:0x00200080
[    2.372553] get property:                    f_min, value:0x00061a80
[    2.378852] get property:                    f_max, value:0x05f5e100
[    2.385140] get property:             max_req_size, value:0x00020000
[    2.391444] get property:                  pinname, str:emmc
[    2.397046] get property:                card_type, value:0x00000001
[    2.403346] get property:                gpio_dat3, str:
[    2.408606] get property:                 hw_reset, str:
[    2.417807] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.420469] dwc_otg: Indeed it is in host mode hprt0 = 00001101
[    2.527795] aml_emmc_hw_reset 1356
[    2.533018] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    2.533172] ion_dev has 1 memory regions
[    2.549280] fb: osd_init_module
[    2.549358] fb: viu vsync irq: 35
[    2.550079] meson-fb has 1 memory regions
[    2.555164] meson-fb meson-fb: assigned reserved memory node linux,meson-fb ok
[    2.561215] fb: osd_probe vinfo:ffffffc001c4d930
[    2.565774] fb: Frame buffer memory assigned at
[    2.570091] fb:     phy: 0x78000000, vir:0xffffff8003c00000, size=98304K
[    2.571540] emmc: BKOPS_EN bit is not set
[    2.580883] [aml_sd_voltage_switch] switch to 1.8V for a non-uhs device.
[    2.580883]
[    2.580884] fb: osd_set_res_bootargs : mode 12
[    2.587419] emmc: clk 100000000 SDR mode tuning start
[    2.587635] rx_tuning_result[0][0] = 10
[    2.587859] rx_tuning_result[0][1] = 10
[    2.588073] rx_tuning_result[0][2] = 10
[    2.588285] rx_tuning_result[0][3] = 10
[    2.588499] rx_tuning_result[0][4] = 10
[    2.588714] rx_tuning_result[0][5] = 10
[    2.588929] rx_tuning_result[0][6] = 10
[    2.589143] rx_tuning_result[0][7] = 10
[    2.589375] rx_tuning_result[0][9] = 10
[    2.589378] best_win_start =9, best_win_size =9
[    2.589380] sd_emmc_regs->gclock =0x100024a, sd_emmc_regs->gadjust =0x32000
[    2.589383] emmc: gclock =0x100024a, gdelay=0x9585608c
[    2.589384] gadjust=0x32000
[    2.589501] emmc: try set sd/emmc to DDR mode
[    2.589505] emmc: try set sd/emmc to DDR mode
[    2.589508] emmc: clk 100000000 DDR mode tuning start
[    2.590317] rx_tuning_result[0][0] = 10
[    2.591077] rx_tuning_result[0][1] = 10
[    2.591835] rx_tuning_result[0][2] = 10
[    2.592595] rx_tuning_result[0][3] = 10
[    2.592683] best_win_start =0, best_win_size =4
[    2.592685] sd_emmc_regs->gclock =0x1000245, sd_emmc_regs->gadjust =0x12000
[    2.592687] emmc: gclock =0x1000245, gdelay=0x9585608c
[    2.592688] gadjust=0x12000
[    2.592757] emmc: new HS400 MMC card at address 0001
[    2.593125] emmc: clock 100000000, 8-bit-bus-width
[    2.593125]
[    2.593125] mmcblk0: emmc:0001 BGND3R 29.1 GiB
[    2.716794] fb: fb def : 1920 1080 1920 2160 32
[    2.717210] hub 1-1:1.0: USB hub found
[    2.717500] hub 1-1:1.0: 4 ports detected
[    2.717526]  mmcblk0: p1 p2
[    2.731660] fb: init fbdev bpp is:32
[    2.735182] fb: ---------------clear fb0 memory
[    2.767051] fb: osd[0] canvas.idx =0x40
[    2.767053] fb: osd[0] canvas.addr=0x78000000
[    2.767054] fb: osd[0] canvas.width=7680
[    2.767055] fb: osd[0] canvas.height=2160
[    2.798610] Console: switching to colour frame buffer device 240x67
[    2.844965] fb: Frame buffer memory assigned at
[    2.845056] fb:     phy: 0x7e000000, vir:0xffffff8001980000, size=1024K
[    2.861572] fb: osd probe OK
[    2.861741] vout_serve: vout_init_module
[    2.862828] vout_serve: meson_vout_probe
[    2.866653] vout_serve: create vout attribute OK
[    2.871265] ge2d: ge2d_init_module
[    2.874576] ge2d: ge2d_dev major:244
[    2.878255] ge2d: ge2d clock is 400 MHZ
[    2.881898] ge2d: ge2d: pdev=ffffffc05dad2800, irq=182, rstc=0xffffffc05b279500, clk=ffffffc05da9fc00
[    2.891072] ge2d: mapped phy: 0xd0160000
[    2.894923] ge2d: ge2d start monitor
[    2.898536] ge2d: ge2d workqueue monitor start
[    2.898613] codec:Amlogic A/V streaming port init
[    2.899222] codec:get gate demux control ok ffffffc05b280e00
[    2.899226] codec:get gate parser_top control ok ffffffc05b280f00
[    2.899233] codec:get gate vpu_intr control ok ffffffc05b283000
[    2.899239] codec:get gate vdec control ok ffffffc05b283100
[    2.899406] codec:[tsync_pcr_init]init success.
[    2.899438] codec:regist mpeg12 codec profile
[    2.899471] codec:regist mpeg4 codec profile
[    2.899472] codec:amvdec_vc1 module init
[    2.899501] codec:regist vc1 codec profile
[    2.899503] codec:amvdec_h264 module init
[    2.899554] codec:regist h264 codec profile
[    2.899556] codec:amvdec_h264mvc module init
[    2.899586] codec:regist hmvc codec profile
[    2.899587] codec:amvdec_h264_4k2k module init
[    2.899617] codec:regist h264_4k2k codec profile
[    2.899619] codec:amvdec_h265 module init
[    2.899653] codec:regist hevc codec profile
[    2.899684] codec:regist mjpeg codec profile
[    2.899685] codec:amvdec_real module init
[    2.899715] codec:regist real codec profile
[    2.899716] codec:amvdec_avs module init
[    2.899746] codec:regist avs codec profile
[    2.899790] amvenc_avc_probe -- reserved memory config fail.
[    2.899792] amvenc_avc - cma memory pool size: 32 MB
[    2.899812] encode_wq_init.
[    2.899816] encode start monitor.
[    2.899879] encode workqueue monitor start.
[    2.899966] jpegenc module init
[    2.900063] codec:picdec_driver_probe called.
[    2.900066] picdec has 1 memory regions
[    2.900098] picdec picdec: assigned reserved memory node linux,picdec ok
[    2.900099] codec:picdec_driver_probe done.
[    2.900100] codec:reserved memory config fail , use CMA      .
[    2.903661] codec:cma memory is 64c00000 , size is  3000000
[    2.904008] codec:0 addr is 64c00000################
[    2.904016] codec:1 addr is 64efd000################
[    2.904152] switch_vpu_mem_pd: vpu_arb ON
[    2.904383] codec:create_ge2d_work_queue video task ok
[    2.904673] codec:register clk_set_setting cpu[31]
[    2.904986] di_module_init ok.
[    2.904991] di_module_init: major 240
[    2.905156] di_probe
[    2.905255] deinterlace has 1 memory regions
[    2.905290] di reveser memory 0x76200000, size 30MB.
[    2.905299] deinterlace deinterlace: assigned reserved memory node linux,di ok
[    2.905455] rdma_register, rdma_table_addr ffffff800047a000 rdma_table_addr_phy 6004a000 reg_buf ffffffc05b21c000
[    2.905457] rdma_register success, handle 1 table_size 8192
[    2.905458] di_probe allocate rdma channel 1.
[    2.905463] DI hw version 2.
[    2.905472] 0x000000c3:Y=c3,U=0,V=0
[    2.905473] 0x000000c4:Y=c4,U=0,V=0
[    2.905475] 0x000000c5:Y=c5,U=0,V=0
[    2.905476] 0x000000c6:Y=c6,U=0,V=0
[    2.905478] 0x000000c7:Y=c7,U=0,V=0
[    2.905479] 0x000000c8:Y=c8,U=0,V=0
[    2.905481] 0x000000c9:Y=c9,U=0,V=0
[    2.905484] 0x000000ca:Y=ca,U=0,V=0
[    2.905485] 0x000000cb:Y=cb,U=0,V=0
[    2.905486] 0x000000cc:Y=cc,U=0,V=0
[    2.905489] 0x000000cd:Y=cd,U=0,V=0
[    2.905490] 0x000000ce:Y=ce,U=0,V=0
[    2.905491] 0x000000cf:Y=cf,U=0,V=0
[    2.905624] di_probe here.
[    2.905640] switch_vpu_mem_pd: di_pre OFF
[    2.905817] efusekeynum: 4
[    2.905825] efusekeyname:             mac    offset:     0   size:     6
[    2.905831] efusekeyname:          mac_bt    offset:     6   size:     6
[    2.905836] efusekeyname:        mac_wifi    offset:    12   size:     6
[    2.905842] efusekeyname:            usid    offset:    18   size:    16
[    2.905923] efuse efuse: probe OK!
[    2.906048] 6aml_unifykeys_init done!
[    2.906049] ppmgr module init func called
[    2.906083] ppmgr_driver_probe called
[    2.906086] ppmgr has 1 memory regions
[    2.906095] init ppmgr memsource 74200000->761fffff
[    2.906209] ppmgr_probe done
[    2.906417] swapper/0[1]: undefined instruction: pc=ffffffc001b05e00
[    2.906421] Code: a9000296 91226296 aa1703e1 aa1403e3 (00002015)
[    2.906426] Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
[    2.906433] Modules linked in:
[    2.906439] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.79-odroidc2 #5
[    2.906442] task: ffffffc05d86a000 ti: ffffffc05d878000 task.ti: ffffffc05d878000
[    2.906456] PC is at ionvideo_init+0x258/0x2f8
[    2.906458] LR is at ionvideo_init+0x234/0x2f8
[    2.906460] pc : [<ffffffc001b05e00>] lr : [<ffffffc001b05ddc>] pstate: 20000145
[    2.906461] sp : ffffffc05d87bd40
[    2.906464] x29: ffffffc05d87bd40 x28: ffffffc05d81c0b0
[    2.906467] x27: ffffffc05d81c138 x26: 0000000000000000
[    2.906470] x25: ffffffc05d81c010 x24: ffffffc001f76000
[    2.906472] x23: ffffffc001a6ae28 x22: ffffffc05d81c898
[    2.906475] x21: ffffffc0018be398 x20: ffffffc05d81c000
[    2.906478] x19: 0000000000000000 x18: 0000000000000000
[    2.906480] x17: 0000000000000000 x16: 0000000000000000
[    2.906482] x15: 0000000000000000 x14: 0000000000000004
[    2.906485] x13: ffffffc05b340904 x12: ffffffc05b34017e
[    2.906488] x11: 7f7f7fffffffffff x10: 6b0b65bbb1cae0d9
[    2.906490] x9 : 7f7f7f7f7f7f7f7f x8 : 0000000000000646
[    2.906493] x7 : ffffffc001a11333 x6 : ffffffc05b341000
[    2.906495] x5 : ffffffc05b341000 x4 : 0000000000000140
[    2.906498] x3 : ffffffc05d81c000 x2 : ffffffc0018be8d0
[    2.906501] x1 : ffffffc001a6ae28 x0 : ffffffc001c55430
[    2.906504]
[    2.906504] PC: 0xffffffc001b05d80:
[    2.906511] 5d80  910d6281 b9037a80 b0ffcf20 913da000 f9009a82 f901c680 9107a2a0 f901ca80
[    2.906517] 5da0  52800040 f9018299 97e1dcda f94037a3 aa1403e1 aa1b03e0 f901e683 97e40385
[    2.906523] 5dc0  f9409a81 aa1c03e0 b940b6c2 52800023 f9400024 52800001 97e79744 37f802e0
[    2.906529] 5de0  f9400ac0 910022d6 f90006d4 9114e2a2 a9000296 91226296 aa1703e1 aa1403e3
[    2.906535] 5e00  00002015 00001001 9585608c 958590a2 00000000 00000000 00000000 00000000
[    2.906541] 5e20  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906547] 5e40  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906553] 5e60  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906555]
[    2.906555] LR: 0xffffffc001b05d5c:
[    2.906561] 5d5c  97e1df49 f9018e9b 394022e0 910642a2 f94002e1 9104e29b 390cc280 b9421300
[    2.906567] 5d7c  f9019681 910d6281 b9037a80 b0ffcf20 913da000 f9009a82 f901c680 9107a2a0
[    2.906574] 5d9c  f901ca80 52800040 f9018299 97e1dcda f94037a3 aa1403e1 aa1b03e0 f901e683
[    2.906580] 5dbc  97e40385 f9409a81 aa1c03e0 b940b6c2 52800023 f9400024 52800001 97e79744
[    2.906586] 5ddc  37f802e0 f9400ac0 910022d6 f90006d4 9114e2a2 a9000296 91226296 aa1703e1
[    2.906592] 5dfc  aa1403e3 00002015 00001001 9585608c 958590a2 00000000 00000000 00000000
[    2.906598] 5e1c  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906603] 5e3c  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906605]
[    2.906605] SP: 0xffffffc05d87bcc0:
[    2.906611] bcc0  5d81c000 ffffffc0 018be398 ffffffc0 5d81c898 ffffffc0 01a6ae28 ffffffc0
[    2.906617] bce0  01f76000 ffffffc0 5d81c010 ffffffc0 00000000 00000000 5d81c138 ffffffc0
[    2.906624] bd00  5d81c0b0 ffffffc0 5d87bd40 ffffffc0 01b05ddc ffffffc0 5d87bd40 ffffffc0
[    2.906629] bd20  01b05e00 ffffffc0 20000145 00000000 3e000459 00000000 00000000 00000000
[    2.906636] bd40  5d87bdd0 ffffffc0 01081694 ffffffc0 5d878000 ffffffc0 01b05ba8 ffffffc0
[    2.906642] bd60  00000000 00000000 00000006 00000000 01c86000 ffffffc0 01ac3d20 ffffffc0
[    2.906648] bd80  01ad0198 ffffffc0 01b0f4f8 ffffffc0 01ba53b8 ffffffc0 00000000 00000000
[    2.906654] bda0  5d81c400 ffffffc0 5d81c3d8 ffffffc0 018be4d8 ffffffc0 01d5e220 ffffffc0
[    2.906656]
[    2.906656] X0: 0xffffffc001c553b0:
[    2.906662] 53b0  018be190 ffffffc0 00000000 00000000 014090a8 ffffffc0 00000000 00000000
[    2.906669] 53d0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906675] 53f0  00000000 00000000 5b291d00 ffffffc0 00000000 00000000 00000000 00000000
[    2.906681] 5410  01649f30 ffffffc0 00000000 00000000 00000000 00000000 00000010 00000032
[    2.906687] 5430  01c55430 ffffffc0 5d81c000 ffffffc0 01a6ae28 ffffffc0 00000000 00000000
[    2.906693] 5450  01c55528 ffffffc0 00000000 00000000 5d978500 ffffffc0 00000000 00000000
[    2.906699] 5470  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906705] 5490  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906706]
[    2.906706] X1: 0xffffffc001a6ada8:
[    2.906713] ada8  73253701 7325203a 6f63202c 3d746e75 202c6425 657a6973 646c253d 0000000a
[    2.906719] adc8  52453301 20524f52 73726170 20676e69 69727473 253a676e 6f742073 736e7520
[    2.906725] ade8  656e6769 6f6c2064 000a676e 00000000 72727563 20746e65 6c616373 20676e69
[    2.906731] ae08  65746172 20736920 000a6425 00000000 656d6143 25206172 00000075 00000000
[    2.906737] ae28  766e6f69 6f656469 00000000 00000000 73253601 6e75203a 69676572 72657473
[    2.906744] ae48  20676e69 000a7325 74616c70 6d726f66 0073253a 00000000 6e693601 74207469
[    2.906750] ae68  6c63206f 20726165 20656874 656e6f64 73696c20 75622074 72656666 6e6f642e
[    2.906757] ae88  00000a65 00000000 78453601 74756365 68742065 49562065 5f4f4544 52415453
[    2.906758]
[    2.906758] X2: 0xffffffc0018be850:
[    2.906764] e850  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906770] e870  014f7308 ffffffc0 00000000 00000000 0164a840 ffffffc0 00000000 00000000
[    2.906776] e890  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906782] e8b0  00000000 00000000 014f7358 ffffffc0 014f2d48 ffffffc0 00000000 00000000
[    2.906789] e8d0  0164c228 ffffffc0 766e6f69 6f656469 656c735f 00007065 766e6f69 6f656469
[    2.906795] e8f0  696b732e 72665f70 73656d61 00000000 766e6f69 6f656469 6572662e 6e757265
[    2.906801] e910  646f6d5f 00000065 766e6f69 6f656469 6469762e 6d696c5f 00007469 00000000
[    2.906807] e930  766e6f69 6f656469 6265642e 00006775 766e6f69 6f656469 645f6e2e 00737665
[    2.906809]
[    2.906809] X3: 0xffffffc05d81bf80:
[    2.906815] bf80  5d81be80 ffffffc0 5da1f080 ffffffc0 5c00b898 ffffffc0 5c00b880 ffffffc0
[    2.906821] bfa0  01be8d28 ffffffc0 5b5c95a0 ffffffc0 00000001 00000007 00000000 00000000
[    2.906828] bfc0  00000000 00000000 5d800100 ffffffc0 c61416e9 5f456c48 2569ed94 64f1c6fe
[    2.906834] bfe0  66c4adb0 f83e9706 238c12d5 7b30a7d7 4b53af2b 611aba1f 905a845b 8ce35666
[    2.906840] c000  01c55430 ffffffc0 01c55430 ffffffc0 00000000 00000000 00000000 00000000
[    2.906846] c020  5d81c020 ffffffc0 5d81c020 ffffffc0 00000000 766e6f69 6f656469 3030302d
[    2.906852] c040  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906858] c060  00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000
[    2.906860]
[    2.906860] X5: 0xffffffc05b340f80:
[    2.906866] 0f80  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906872] 0fa0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906878] 0fc0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906884] 0fe0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.906890] 1000  00000000 00000000 47d3cc07 4003f6e1 f82aa2c1 2b742899 2fa5571a 07c0abda
[    2.906896] 1020  6c1ba8f8 1fce5401 cb66d051 0b293544 8d8eb1e7 db334a1a ae85b924 c3810d45
[    2.906903] 1040  0f9aa0c4 e72c9026 dd3dc669 c1d4873a 209fca4f 7c1e81c3 f5371bba e077dfe2
[    2.906909] 1060  6bed0734 251b1f42 12236353 a44f02c1 0d2399b9 96c5c23e ae2800e4 69a04223
[    2.906917] 0f80  00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000  0.
6924] 0fa0  00000000 00000000 00000000 0000000[    2 9 62.9] 9fc]  f00  000 0000 000 00000000 00000000 0000000000000 000 0000 000 0000000000000
[    2.906941] 1000  00000000 00000000 47d3cc[7   03f66941]2100c1 2b740090 0005571a 07d0cb0a
0293544 8d8eb1e7 db334a1a ae85b924 c3810d45
[    2[ 0  5.] 6050] 0040 00f aa2c90272d90d6669 c1668 3a 207faa20 fca4f173 f81c3bba37077afe07
             d223
[    2.906962]
969] 12b0  2f62696c 6a626f6b 5f746365 65766575 632e746    200000 9] 12301 65655f6c
   a61765f 7562203a 72656666 7a697320 6f742065 6d73206f 0a  2c916971] 12f0  00000000 00000000 49544341 253d4e4f 00000073   209009850564f04 00080401
0000000 53425553 45545359 73253d4d 00000000 4e514553 25 d4.906
                                                              83] 1330  00756c6c 00000000 25407325 00000073 6f6b330[ 6 656a66993751f70  4676576c 056c6261 206f74995] 1370  000a2174 00000000 00646461 00000000 6e616863  0 2.907005]6137d 0000a017
0000656e 6c66666f 00656e69 2f62696c 73696c70 00632e74[ 0 02000
18] 13b0  2f62696c 69646172 72742d78 632e6565 0000000[   0009000686461b2 72f45698c 6X12: 0xffffffc05b3400fe:
 00000000 00000000 69646172 72745f78
[    2.907027] 00fc  00000000 00000007 49  434.901324e4f0fc0 0400 015 00000003d4854 341 61344e46[    2.907039] 013c  53425553 45545359 69763d4d 346f[5   2.9e7069 401d00 8 3d554344 4d0051 69
                             65645 763d454d 6f656469 53003331 554e5145 36313d4d
[[    29077552  07c  000003600 00000000 00000000 00000000000000000 0000000  0000000 000000000
[    2.907063] 01bc  00000000 00000000 00000000 00000[0  02.90006 0001b00  000000000000 00000000 00000000 00000000 00000000 00000000
[     ..907055]01fcc 000000000 0000000 000000000 0000000  0000000000000000 00000000  00000000

             [    2.907083] 0884  00000000 00000000 00000000 000000   020907083]00884  00000000  0000000
000000 00000000[    2.907095] 08c4  00000000 00000000 00 0  2. 07090000804 00000000 00000000 00000000 00000000 00000000
[    2.907107] 0904  2090707b 000040 0000000000000000000000000000 000000 0000000000 000000000
             00000 00000000
[    2.907119] 0944  00000000 00000000 00   020907110000 000000000000000000000 00000000000000000 00000000 00000000 00000000 00000000
[    2.907128]
ff1f080 ffffffc0 5c00b898 ffffffc0 5c00b880 ffffffc0
[  [  . 07147]4bf bf 0 b01be8 ff fffc0f5055b5c95ff ffff0 c0 00001 00 00007 00 000000000000000
             0
[    2.907154] bfe0  66c4adb0 f83e9706 238c12d5 7b30a7d7  b.3071b 61bab0 f 9c5a840 f8ce3706
855430 ffffffc0 00000000 00000000 00000000 00000000
[  [    0.107] c]2c0 5  1c010020fffffffc081d8200ff fffff 00 00000 70 76669 69 562d6 6033002d
[    2.907178] c060  00000000 00000000 00000000 00000[    200071780 c060 000000000100000000 000ffc0018be318:
 00000000 00000000 00000001 00000000
[[   22.901155]e311  00000000  00000000 114a558  ffffff0000000000 00000000 00000000 00000000
[    2.907198] e358 [ 1 42.907fffffe358 1646236 8fffffc0c0 64a49838fffffcf 0 61a4a8 8 fffff0c
              0164a6e0 ffffffc0
[    2.907211] e398  01a6b208 ffffffc0  4424752720000039801a6a618 f fffff0c50344242 20000010
 01a6b238 ffffffc0 33524742 00000018
[    2.907224] e3d8[    6.247 24f ffd0 30316b448 0f0000c00323b564effff0fc0  13a662e 000f0ffc0 32315659 0000000c
[    2.907232]
[    2.907232] X22: 0[   fffc07282]818[
  00000000 00000000 00000000 00000000 00000000 00000000 000  02. 07008] 0
8  00000000 00000000 00000000 00000000 00000000 00000000   0 000072000 0838  00000000 00000000 00000000 00000000 00000000 00000000 0[ 0  00900209]0c858  00000000 00000000 00000000 00000000 00000000 0000000[   0209072500 0078
                                                                 00000000 00000000 00000000 00000000 00000000 00000000 0 0 02.0 706100c8
  00000000 00000000 00000000 00000000 00000000 00000000   02.007267]0c8b8
00000000 00000000 00000000 00000000 00000000 00000000 0  00090720300080
00907280] X23: 0xffffffc001a6ada8:00 00000000 000000[0  02.907270]0c800
 00000000 00000000 00000000 00000000
[    2.907286] ada8  73253701 732  239 6f8620aca3d 76e53721 c642506a a663206c 32546e750e7520
[    2.907299] ade8  656e6769 6f6c2064 000a67   00090700 7 ad7563 20e47e6  f661034 020a6766 0
             000000 656d6143 25206172 00000075 00000000
[    2.9073112.9e78117 6e686 76f65666  0606069  00000000070203601 6e75603a 6752057 69266577372607469
[    2.907324] ae68  6c63206f 20726165 20656874 656.606327]69e620 6c63206f 7262665756365 68742065 49562065 5f4f4544 52415453
[    2.[  3 1.90
.[   32. X24: 0 f2ff fc0ffff5f001f7500000 00000000 00000000 00000000 00000000
[    2.90734 ] .fa7 40] 5f00  00000000 00000000 00000000 00000000 00000000 00000000000000000
[    2.907355] 5fe0  00000000 00000000 0000[0   00007000]050e0  0 00000000000000000 00000000
00000 00000000 00000000 00000000 00000000
[    2.9[ 3  2 6020  ]06000   0000000 00000000  0000000000000000  00000000 0000000000000000
[    2.907379] 6060  00000000 00000000 000[0   200070000 6000 000 00000000 00000000000000 000000:
 00000000 00000000 00000000 00000000
[    2.9 7 86.90f386  c000 95cffb8f8cfffc0fc885 0fffff fff1fecd20 00000000 5d800100 ffffffc0
[    2.907398] bfd0 [c6 426e075f856cfd 25c91d96e6 ffc5fc 66256ded f834f106f238614d5b7b38a7d7
 01c55430 ffffffc0
[    2.907411] c010  00000000 000[0 0 200070110 0000  00050010 20 f000f 00 00800 00 0f00ffc081c000 00000000 00000000 00000000
[    2.907423] c050  0   00907020]0c05  0000000 0000000000 000000 0 0000000000000 5d81c080 ffffffc0
[    2.907431]
900000 00000000 00000000 00000000 00000000 00000000 00[000 2.900400] c
                                                                      b8  00000000 00000000 00000000 00000000 00000000 0000[ 0  0.907442] 00d80 0
00000 00000000 00000000 00000000 00000000 00000000 00[    0.000048] c0f8  00000000 00000000 00000000 00000000 00000000 00000  0 0.90e458  ff18  00000000 0000000138  5b06b018 ffffffc0 5b078080 ffffffc0 5d978080 ffff  c 209015670 c158  cb0
                                                                             be88 ffffffc0 00000002 00000007 00000000 00000000 00[ 0  0.00047200c
                                                                 78  00000001 00000000 5d81c1a0 ffffffc0 5d81c1a0 ffff  c02.9070700 00000000
0480] X28: 0xffffffc05d81c030:
 5d81c1a0 ffffffc0 00000000 00000000
[    2.907486] c030  00000000 766 6  2.9f656669c003  00d 0000 706 0f0906f650009 003 30000000
[    2.907498] c070  00000000 00000000 0000000[ 0002.00049d8 c070  00fff0005d80c080  fffffc0
00000000 00000002 00000000 00000000 00000000
[    2.9   20] 7510] c0b00 00000000000 00000 00000000000000000000 00000 00 00000000 00000000
0000
[    2.907523] c0f0  00000000 00000000 000000[0 00009075 000c0000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    [.   5390 531]
                     [ 9075.1]7521] Xx9ff0xff0fd8705c07bccfc0 5d81c898 ffffffc0 01a6ae28 ffffffc0
[    2.907 432.b075  ] fce00  1ff6ff0  5fffcc10 f8ff0f00 ff00fc0  0000000 0508101385df1cff8
ffffc0
[    2.907555] bd20  01b05e00 ffffffc0 2000014520000505] 3d200 51 00e00 f0ff0fc0 20 00045000000fc0 5d878000 ffffffc0 01b05ba8 ffffffc0
[    2.[07  8]90d66  0b0600 0 000000 00000000 0 000000000010060 0 fff00fcf 01ac3020 fffd2fcff
             f0000
[    2.907580] bda0  5d81c400 ffffffc0 5d81    2fff7ff00 b1a0  5d8fcf00fc0ffff5025d8fffdf f0
ffc0 018be4d8 ffffffc0 01d5e220 ffffffc0
[    2[9 7 8.] 7r8c] s 0xffffffc05d87bd40 to 0xffffffc05d87c000)
05d878  8)2.907589] bd40: 5d87bdd0 ffffffc0 01081694 ffffffc0 5d 780907593] bd60: 00000000 00000000 00000006 00000000 01    0. 0f5ff] 0 01:c0020 f0f 00000000 01b0f4f8 ffffffc0 01ba53b8 ffffffc0 00000000 0[0 00209
                                                    7601] bda0: 5d81c400 ffffffc0 5d81c3d8 ffffffc0 0 8b 2d807f01f bd 0: 5e81c400 ffffffc0 01c55000 ffffffc0 5d87be50 ffffffc0 01ad09d8 f[    c.9
                                 7609] bde0: 00000239 00000000 01c86000 ffffffc0 0 b0 209 ffff]fcde0: 00000200000000
0 01ac3d20 ffffffc0 01ad0100 ffffffc0 01b0f4f8 f[ fff20
7617] be20: 01ba4898 ffffffc0 00000000 00000000   8 be90 ff7] bc000191bbe8 ffffffc0c0 01ad0198 ffffffc0 5d87beb0 ffffffc0 018216a8 fff f c2.
                                                            07624] be60: 01c86000 ffffffc0 01c86000 ffffffc[ 0 000000604]00060:000c8000  0fff0000
                                                                 00000000 00000000 00000000 00000000 00000000 0[00 020907632] bea0: 00000000 00000000 00000000 000000[0 0 000076 2]0b000: 00084300 f0f0ff00
                                            0000000 00000000 00000000 00000000 00000000 00    009
                 7639] bee0: 00000000 00000000 00000000 00000000  0 2.9076000 bee0:00000000  0000000
00000000 00000000 00000000 00000000 00000000 [00 000007646] bf20: 00000000 00000000 00000000 000000[    0.0000 0000f20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000[00 00.00
43] bf60: 00000000 00000000 00000000 000000[0   009070 3000f000 00000000 00000000
  0000000 00000000 00000000 00000000 00000000  0 20907656] bfa0: 00000000 00000000 00000000 0000[0   0.007600]0bf00000 00000000 000000 00
                                                         00000 00000000 00000000 00000000 00000[0  00.007004] bfe0: 00000000 00000000 00000000 00000  0 5a504616 19fe9ab6000004070 0710d9 0
_oel_init_freeable+0x194[    2.907696] [[f f 2.90069616[<ffffffc0l_82it+8x] /0xe_i3e1 aa1403e3 (00002015)
[    2.907722[ - -[ 9n772r] e-c[50ad6f3ace cbd ]--f
5: Attempted to kill init! ex[    2.907775] CPU2: stopping
[    2.907780] CPU: 2 [I : 0 90m7: ] CPU: / PID: 0edomm  swa pe  2 Tainted:-Gd o   2 #5
 3.14.79-odroidc2 #5
    2.907769]
[  [   927787]8[]fffffff0f1001e8c>] show_stack+0x24/0x30
128
[    2.907   ] .<07795] 0<f82ff2c0018u4p28>acdu0p8st0xa+0
                                                         8c0/0x1d[    2.907802] 10ck(0xffffffc05d92be30 to 0xffff[    2.9078[ ] b220: 80 ]  e20:                              8000  fff9f80001ff800f f0000000
[    2.907815] be60: 741afd14 ffffff 0 20007000  1060:00429fda4affffffc000000000aaca00 00000000 5d92bda0 ffffffc0
[    2.90[8  ]2.9a0:23]0b030: 000000f0 00000000 00000000 00000000 00000000 0fffff0f ffffffff ff000000
[    2.907831] bee0: 00000000 00000 00 2d907031] ffe0:c00018380 000ffff0 0d028010 0fffffc0c01
             39b30 ffffffc0 5d928000 ffffffc0
[    2.907   ]2.900: 0]fbf000 01f90000 01000220 01ff0f20 0f00ffc0 00000040 5d920f40 fdf2ffc0
             fffffc0
ffc0011075a8>] cpu_startup_entry+0x2[    2.[ 78 2]907f55f f<0ff08fa501]8fecc>]arecsnaat__etarl_kxrnc/0x118c/0[    2.907860] CPU: 0 PID: 0 Comm: swapper[  Tai.90d:60]   U:    I : .14.79-odroidc2 #5
[    2.907865] [<ffffffc001 88e2.90 8u5p_backffafe001030
128
c001090018>] handle_IPI+0x1c0/0x1d[    2.907[ 7  2.90ffffc0[<0ffffc>]01ic14acd] gicq+an84e_irq
x0xffff[    2.907882] fdc0:                    2. 07  2] fdc :    b       f  ff    1 38000   f f c 0
                    b075a8 ffffffc[    2.907890] fe00: 74197d1[ ff 2ff07890]00000: 1009700  fafaafb0 0000000  0000008  00aaa00b
                                               00000000 01bafd40 ffffffc0
[    2.907898]   4 2 900893]7 0000000000307 0ff00000 000 01fbbc00 f000 0c0bbc00 ffcf0fc000000011f 00000000
[    2.907906] fe80: 00000000  0020907901] fe00 f00f00c0 00830000  f1bfc00 0fcff ffffffc0 01bac000 ffffffc0
[    2.907914][ ec0:.91b9198 fecff 01b 99880f7ffffc0f010 000800f0 0fc0 0400010af01000040ff10
f10 ffffffc0
[    2.907919] [<ffffffc0010[3  c>]9e711ir +0fff/ffd8010075a8>] cpu_startup_entry+0x2[    2.907925]    2.fff9201 2<67cff ce01_initc0x8r/0x_8nitnel+0x36c/0x384
x288
[    3.949440] SMP: fa l3. t9440opSMPconaaled to
op secondary CPUs
x36c/0x384
[    4.936676] CPU3: stopping
[    4.942023] CPU: 3 PID: 75 Comm: ge2d_monitor Tainted: G      D      3.14.79-odroidc2 #5
[    4.950041] Call trace:
[    4.953854] [<ffffffc001088e40>] dump_backtrace+0x0/0x128
[    4.957807] [<ffffffc001088f8c>] show_stack+0x24/0x30
[    4.962809] [<ffffffc001824028>] dump_stack+0x88/0xac
[    4.967811] [<ffffffc001090018>] handle_IPI+0x1c0/0x1d0
[    4.972986] [<ffffffc00108143c>] gic_handle_irq+0x84/0x88
[    4.978332] Exception stack(0xffffffc05b2cfb20 to 0xffffffc05b2cfc40)
[    4.984717] fb20: 01c8c000 ffffffc0 01bd8118 ffffffc0 5b2cfc60 ffffffc0 01105984 ffffffc0
[    4.992824] fb40: 00000000 00000000 00000000 00000000 00000000 00000000 01583b80 ffffffc0
[    5.000932] fb60: 01bb99b8 ffffffc0 00000030 00000000 00000314 00000000 20706f74 6f636573
[    5.009040] fb80: 7261646e 50432079 5b2cfb60 ffffffc0 5b2cfb60 ffffffc0 ffffffff 00000000
[    5.017147] fba0: 01c8d065 ffffffc0 81c8d057 ffffffc0 00000006 00000000 00000000 00000000
[    5.025254] fbc0: 00000000 00000000 00000000 00000000 00000001 00000000 01c8c000 ffffffc0
[    5.033362] fbe0: 01bd8118 ffffffc0 00000001 00000000 00000006 00000000 00000140 00000000
[    5.041469] fc00: 00000000 00000000 00000022 00000000 00000000 00000000 00000022 00000000
[    5.049577] fc20: 00000006 00000000 5b2cfc60 ffffffc0 01105980 ffffffc0 5b2cfc60 ffffffc0
[    5.057683] [<ffffffc001083dac>] el1_irq+0x6c/0xd8
[    5.062428] [<ffffffc001822cb8>] printk+0x6c/0x78
[    5.067088] [<ffffffc0015eaa74>] ge2d_monitor_thread+0x44/0x338
[    5.072952] [<ffffffc0010d4158>] kthread+0xd8/0xf0

 

 

Hello

 

I'am facing the same problem on my odriodc2 board. Installed 2 times according to the instructions given in post #6.

16 GB eMMC card setup with microSD Card Reader from hardkernel.

Unfortunately, i don't have a serial adapter to provide detailed boot logs.

Currently, i'am trying to set the eMMC up with nand-sata-install script. See wether it makes any differences.

 

regards

level-one

Hello again,

 

same result. Solid blue light on reboot.

Board works if i'am using sd card to boot. HW seems to be ok.

I found two diffs which could affect but I have explanation :( We would need a help from Hardkernel here since we don't do much with this kernel.

 

My bootlog:
 

 

 

Starting kernel ...

uboot time: 3485644 us
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.79-odroidc2 (root@xenial) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #21 SMP PREEMPT Fri Oct 28 07:34:10 CEST 2016
[    0.000000] CPU: AArch64 Processor [410fd034] revision 4
[    0.000000] secmon: share mem setup
[    0.000000] Reserved memory: initialized node linux,secmon, compatible id aml_secmon_memory
[    0.000000] __reserved_mem_alloc_size: linux,meson-fb
[    0.000000] fb: Reserved memory: created fb at 0x0000000078000000, size 128 MiB
[    0.000000] Reserved memory: initialized node linux,meson-fb, compatible id amlogic, fb-memory
[    0.000000] __reserved_mem_alloc_size: linux,di
[    0.000000] DI reserved memory: created CMA memory pool at 0x0000000076200000, size 30 MiB
[    0.000000] Reserved memory: initialized node linux,di, compatible id amlogic, di-mem
[    0.000000] __reserved_mem_alloc_size: linux,ion-dev
[    0.000000] linux,ion-dev add multi user:ffffffc001c4c650
[    0.000000] ion_dev mem setup
[    0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
[    0.000000] ppmgr share mem setup
[    0.000000] linux,ion-dev add multi user:ffffffc001c550a8
[    0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
[    0.000000] __reserved_mem_alloc_size: linux,codec_mm_cma
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000067c00000, size 188 MiB
[    0.000000] Reserved memory: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
[    0.000000] __reserved_mem_alloc_size: linux,picdec
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000064c00000, size 48 MiB
[    0.000000] Reserved memory: initialized node linux,picdec, compatible id shared-dma-pool
[    0.000000] __reserved_mem_alloc_size: linux,codec_mm_reserved
[    0.000000] codec_mm:vdec: reserved mem setup
[    0.000000] Reserved memory: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
[    0.000000] cma: Reserved 8 MiB at 60000000
[    0.000000] On node 0 totalpages: 486912
[    0.000000]   Normal zone: 8568 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 486912 pages, LIFO batch:31
[    0.000000] psci: probing function IDs from device-tree
[    0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc074197000 s19712 r8192 d21248 u49152
[    0.000000] pcpu-alloc: s19712 r8192 d21248 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 478344
[    0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait rootflags=data=writeback rw console=ttyS0,115200n8 console=tty0 consoleblank=0 no_console_suspend hdmimode=1080p60hz m_bpp=24 vout= fsck.repair=yes loglevel=9 net.ifnames=0
[    0.000000] logo: get hdmimode: 1080p60hz
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Memory: 1505020K/1947648K available (7906K kernel code, 871K rwdata, 2648K rodata, 875K init, 3164K bss, 442628K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffff8040000000   (  1024 MB)
[    0.000000]     vmemmap : 0xffffff8040010000 - 0xffffff80421d0000   (    33 MB)
[    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc078000000   (  1920 MB)
[    0.000000]       .init : 0xffffffc001ad0000 - 0xffffffc001baad00   (   876 kB)
[    0.000000]       .text : 0xffffffc001080000 - 0xffffffc001acfb44   ( 10559 kB)
[    0.000000]       .data : 0xffffffc001bab000 - 0xffffffc001c84f30   (   872 kB)
[    0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[    0.000194] Console: colour dummy device 80x25
[    0.000672] console [tty0] enabled
[    0.003043] allocated 8388608 bytes of page_cgroup
[    0.003052] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.003072] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.003090] pid_max: default: 32768 minimum: 301
[    0.003173] Security Framework initialized
[    0.003200] AppArmor: AppArmor initialized
[    0.003235] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003248] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003676] Initializing cgroup subsys debug
[    0.003690] Initializing cgroup subsys memory
[    0.003708] Initializing cgroup subsys devices
[    0.003720] Initializing cgroup subsys freezer
[    0.003732] Initializing cgroup subsys net_cls
[    0.003741] Initializing cgroup subsys blkio
[    0.003750] Initializing cgroup subsys perf_event
[    0.003763] Initializing cgroup subsys net_prio
[    0.003772] Initializing cgroup subsys hugetlb
[    0.003814] ftrace: allocating 27653 entries in 109 pages
[    0.027792] /cpus/cpu@0: Missing clock-frequency property
[    0.027823] /cpus/cpu@1: Missing clock-frequency property
[    0.027835] /cpus/cpu@2: Missing clock-frequency property
[    0.027847] /cpus/cpu@3: Missing clock-frequency property
[    0.027860] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[    0.069399] Meson chip version = RevB (1F:B - 0:0)
[    0.088352] CPU1: Booted secondary processor
[    0.108325] CPU2: Booted secondary processor
[    0.128329] CPU3: Booted secondary processor
[    0.128380] Brought up 4 CPUs
[    0.128409] SMP: Total of 4 processors activated.
[    0.128913] devtmpfs: initialized
[    0.140350] pinctrl core: initialized pinctrl subsystem
[    0.140630] regulator-dummy: no parameters
[    0.142188] device-tree: Duplicate name in efusekey, renamed to "key0#1"
[    0.142216] device-tree: Duplicate name in efusekey, renamed to "key1#1"
[    0.142243] device-tree: Duplicate name in efusekey, renamed to "key2#1"
[    0.142272] device-tree: Duplicate name in efusekey, renamed to "key3#1"
[    0.144054] NET: Registered protocol family 16
[    0.144697] register canvas platform driver
[    0.144708] codec:ignore bus ops for cpu=25
[    0.144716] codec:ignore bus ops for cpu=29
[    0.144724] codec:register amports ops for bus[0]
[    0.144731] codec:register amports ops for bus[4]
[    0.144739] codec:register amports ops for bus[3]
[    0.144746] codec:register amports ops for bus[2]
[    0.144754] codec:register amports ops for bus[1]
[    0.144761] codec:register amports ops for bus[13]
[    0.144770] codec:register amports ops for bus[2]
[    0.144778] codec:register amports ops for bus[14]
[    0.144801] register rdma platform driver
[    0.145113] vdso: 2 pages (1 code, 1 data) at base ffffffc001bb2000
[    0.145146] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.145667] DMA: preallocated 256 KiB pool for atomic allocations
[    0.146868] software IO TLB [mem 0x5c800000-0x5cc00000] (4MB) mapped at [ffffffc05c800000-ffffffc05cbfffff]
[    0.146882] Serial: AMBA PL011 UART driver
[    0.146968] hdmitx: system: amhdmitx_init
[    0.146977] hdmitx: system: Ver: 2014May6
[    0.147009] tv_vout: tv_init_module
[    0.147021] tv_vout: major number 254 for disp
[    0.147029] vout_notify: vout_register_server
[    0.147037] tv_vout: register tv module server ok
[    0.147062] codec_mm:codec_mm_module_init
[    0.147165] gxbb clk HIU base is 0xffffff800004c000
[    0.147174] gxbb clk ao base is 0xffffff800004e000
[    0.147213] register mpll_clk_out0 success done
[    0.147224] register mpll_clk_out1 success done
[    0.147236] register mpll_clk_out2 success done
[    0.147405] register sys pll success done
[    0.147447] clkrate [ xtal   ] : 24000000Hz
[    0.147456] clkrate [ 32Khz  ] : 32000Hz
[    0.147464] clkrate [ clk81  ] : 166666666Hz
[    0.147472] clkrate [ fixed_pll      ] : 2000000000Hz
[    0.147480] clkrate [ fclk_div2      ] : 1000000000Hz
[    0.147489] clkrate [ fclk_div3      ] : 666666000Hz
[    0.147496] clkrate [ fclk_div4      ] : 500000000Hz
[    0.147504] clkrate [ fclk_div5      ] : 400000000Hz
[    0.147512] clkrate [ fclk_div7      ] : 285714000Hz
[    0.147541] gxbb clock initialization complete
[    0.147716] msr_clk_reg0=ffffff800005a75c,msr_clk_reg2=ffffff800005c764
[    0.148586] amlogic iomap probe done
[    0.148839] Init pinux probe!
[    0.149579] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
[    0.149829] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb8)
[    0.149849] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb8)
[    0.149913] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb8)
[    0.149932] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb8)
[    0.150109] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 0
[    0.150502] codec:codec map io source 0x00000000c1100000,size=1048576 to 0xffffff8000600000
[    0.150522] codec:codec map io source 0x00000000c8820000,size=65536 to 0xffffff80001a0000
[    0.150540] codec:codec map io source 0x00000000c883c000,size=8192 to 0xffffff8000188000
[    0.150569] codec:codec map io source 0x00000000c8100000,size=1048576 to 0xffffff8000780000
[    0.150588] codec:codec map io source 0x00000000d0100000,size=262144 to 0xffffff8000900000
[    0.150605] codec:codec map io source 0x00000000c8838000,size=1024 to 0xffffff8000186000
[    0.150665] codec_mm has 2 memory regions
[    0.150680] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma ok
[    0.150694] codec_mm:codec_mm_reserved_init 0000000060b00000->0000000064c00000
[    0.150707] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_reserved ok
[    0.150718] codec_mm:codec_mm_probe mem init done
[    0.150728] codec_mm:add reserve memory 0000000060b00000(aligned 0000000060b00000) size=4100000(aligned 4100000)
[    0.150755] codec_mm has 2 memory regions
[    0.150766] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma ok
[    0.150779] codec_mm:codec_mm_reserved_init 0000000060b00000->0000000064c00000
[    0.150791] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_reserved ok
[    0.150802] codec_mm:codec_mm reserved memory probed done
[    0.150810] codec_mm:codec_mm_probe ok
[    0.151371] VPU driver version: v01
[    0.151380] vpu driver detect cpu type: gxbaby
[    0.151394] load vpu_clk in dts: 666667000Hz(7)
[    0.151419] vpu_probe OK
[    0.151606] hdmitx: system: amhdmitx_probe
[    0.151811] hdmitx hpd irq = 89
[    0.152000] hdmitx20: Mapped PHY: 0xc0800000
[    0.152010] hdmitx20: Mapped PHY: 0xc1104400
[    0.152032] hdmitx20: Mapped PHY: 0xc8100000
[    0.152041] hdmitx20: Mapped PHY: 0xc8834000
[    0.152050] hdmitx20: Mapped PHY: 0xc883a000
[    0.152058] hdmitx20: Mapped PHY: 0xc883c000
[    0.152069] hdmitx20: Mapped PHY: 0xd0100000
[    0.152078] hdmitx20: Mapped PHY: 0xda83a000
[    0.152093] hdmitx: alread display in uboot 0x10
[    0.152119] avmute set to 1
[    0.152445] canvas_probe reg=00000000c8838000,size=400
[    0.152460] canvas maped reg_base =ffffff8000192000
[    0.155715] rdma_probe
[    0.185539] bio: create slab <bio-0> at 0
[    0.185990] SCSI subsystem initialized
[    0.186138] usbcore: registered new interface driver usbfs
[    0.186174] usbcore: registered new interface driver hub
[    0.186231] usbcore: registered new device driver usb
[    0.186292] media: Linux media interface: v0.10
[    0.186323] Linux video capture interface: v2.00
[    0.186373] pps_core: LinuxPPS API ver. 1 registered
[    0.186382] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.186403] PTP clock support registered
[    0.186555] logo: logo_init
[    0.186567] tv_vout: tv_set_current_vmode[696]fps_target_mode=12
[    0.186579] tv_vout: mode is 12,sync_duration_den=1,sync_duration_num=60
[    0.186593] switch_vpu_mem_pd: vencp ON
[    0.186603] tv_vout: TV mode 1080p60hz selected.
[    0.186611] tv_vout: already display in uboot
[    0.186618] tv_vout: new mode =1080p60hz set ok
[    0.186626] vout_serve: vinfo mode is: 1080p60hz
[    0.186636] switch_vpu_mem_pd: viu_osd1 ON
[    0.186644] switch_vpu_mem_pd: viu_osd2 ON
[    0.186652] switch_vpu_mem_pd: viu_osd_scale ON
[    0.186793] osd_rdma: osd_rdma_init: rmda_table p=0x60041000,op=0x60041000 , v=0xffffff80001b1000
[    0.186846] Advanced Linux Sound Architecture Driver Initialized.
[    0.187144] Bluetooth: Core ver 2.18
[    0.187169] NET: Registered protocol family 31
[    0.187178] Bluetooth: HCI device and connection manager initialized
[    0.187191] Bluetooth: HCI socket layer initialized
[    0.187202] Bluetooth: L2CAP socket layer initialized
[    0.187225] Bluetooth: SCO socket layer initialized
[    0.187239] NetLabel: Initializing
[    0.187246] NetLabel:  domain hash size = 128
[    0.187253] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.187296] NetLabel:  unlabeled traffic allowed by default
[    0.187799] Switched to clocksource arch_sys_counter
[    0.208345] FS-Cache: Loaded
[    0.208487] CacheFiles: Loaded
[    0.208608] AppArmor: AppArmor Filesystem Enabled
[    0.212520] NET: Registered protocol family 2
[    0.213000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.213096] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.213288] TCP: Hash tables configured (established 16384 bind 16384)
[    0.213360] TCP: reno registered
[    0.213371] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.213413] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.213583] NET: Registered protocol family 1
[    0.213751] Unpacking initramfs...
[    0.366279] Freeing initrd memory: 4760K (ffffffc073a8e000 - ffffffc073f34000)
[    0.366974] kvm [1]: interrupt-controller@c4304000 IRQ25
[    0.367164] kvm [1]: timer IRQ27
[    0.367178] kvm [1]: Hyp mode initialized successfully
[    0.367712] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.367788] audit: initializing netlink subsys (disabled)
[    0.367946] audit: type=2000 audit(0.360:1): initialized
[    0.368337] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.372376] VFS: Disk quotas dquot_6.5.2
[    0.372520] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.373747] msgmni has been set to 3436
[    0.374554] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.374624] io scheduler noop registered
[    0.374633] io scheduler deadline registered
[    0.374652] io scheduler cfq registered (default)
[    0.396753] meson-rng c8834000.rng: hwrng registered
[    0.398984] loop: module loaded
[    0.399254] zram: Created 1 device(s) ...
[    0.399565] mtdoops: mtd device (mtddev=name/number) must be supplied
[    0.406973] libphy: stmmac: probed
[    0.406997] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    0.407008] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[    0.407304] usbcore: registered new interface driver cdc_ether
[    0.407356] usbcore: registered new interface driver cdc_ncm
[    0.407455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.407465] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[    0.407548] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.407606] usbcore: registered new interface driver cdc_acm
[    0.407616] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.407658] usbcore: registered new interface driver usb-storage
[    0.407746] usbcore: registered new interface driver usbserial
[    0.407981] mousedev: PS/2 mouse device common for all mice
[    0.408223] i2c /dev entries driver
[    0.408508] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[    0.408540] cpufreq-hotplug: cpufreq_gov_dbs_init: assumes CONFIG_NO_HZ
[    0.408762] ledtrig-cpu: registered to indicate activity on CPUs
[    0.408918] usbcore: registered new interface driver usbhid
[    0.408928] usbhid: USB HID core driver
[    0.409126] ashmem: initialized
[    0.409223] logger: created 256K log 'log_main'
[    0.409313] logger: created 256K log 'log_events'
[    0.409398] logger: created 256K log 'log_radio'
[    0.409486] logger: created 256K log 'log_system'
[    0.409728] ==uart0 reg addr = ffffff80001de4c0
[    0.409754] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[    1.898119] console [ttyS0] enabled
[    1.901730] ==uart1 reg addr = ffffff80001f24c0
[    1.906058] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[    1.915385] enter  cpufreq
[    1.917879] probe  cpufreq okay
[    1.961272] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
[    1.966766] dwc_otg: Core Release: 3.10a
[    1.968023] dwc_otg: Setting default values for core params
[    1.973545] dwc_otg: curmode: 1, host_only: 1
[    1.980041] dwc_otg: Using Buffer DMA mode
[    1.981903] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    1.986992] dwc_otg: Working on port type = HOST
[    1.991741] dwc_otg dwc2_b: DWC OTG Controller
[    1.995973] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
[    2.002722] dwc_otg dwc2_b: irq 63, io mem 0x00000000
[    2.007698] dwc_otg: -------hcd->flags.d32 = 0
[    2.012120] dwc_otg: Init: Port Power? op_state=1
[    2.016747] dwc_otg: Init1: Power Port (0)
[    2.021277] hub 1-0:1.0: USB hub found
[    2.024529] hub 1-0:1.0: 1 port detected
[    2.028618] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
[    2.048417] dwc_otg: Core Release: 3.10a
[    2.048439] dwc_otg: Setting default values for core params
[    2.052227] dwc_otg: curmode: 1, host_only: 0
[    2.060725] dwc_otg: Using Buffer DMA mode
[    2.060747] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.065677] dwc_otg: Working on port type = OTG
[    2.070167] dwc_otg: Current port type: SLAVE
[    2.074542] dwc_otg dwc2_a: DWC OTG Controller
[    2.078888] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
[    2.085613] dwc_otg dwc2_a: irq 62, io mem 0x00000000
[    2.090937] hub 2-0:1.0: USB hub found
[    2.094327] hub 2-0:1.0: 1 port detected
[    2.098307] dwc_otg: Dedicated Tx FIFOs mode
[    2.102583] dwc_otg: using timer detectid change, ffffffc05d9e3000
[    2.108812] BLASTER Driver Init
[    2.111765] secmon has 1 memory regions
[    2.115461] secmon: share in base: 0xffffff8000464000, share out base: 0xffffff8000466000
[    2.123564] secmon secmon: assigned reserved memory node linux,secmon ok
[    2.130242] secmon: probe done
[    2.133304] storage: storage in base: 0xffffff8001700000
[    2.138478] storage: storage out base: 0xffffff8001780000
[    2.143819] storage: storage block base: 0xffffff8001800000
[    2.149346] storage: probe done!
[    2.152576] Error: Driver 'ICPlus IP175C' is already registered, aborting...
[    2.159523] libphy: ICPlus IP175C: Error -16 in registering driver
[    2.166111] aml_sd_emmc_probe: line 2954
[    2.169528] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[    2.179055] aml_sd_emmc_reg_init 677
[    2.182353] pdata->caps 60007
[    2.185221] pdata->caps2 0
[    2.187901] get property:                ocr_avail, value:0x00200080
[    2.194190] get property:                    f_min, value:0x00061a80
[    2.200532] get property:                    f_max, value:0x0510ff40
[    2.206783] get property:             max_req_size, value:0x00020000
[    2.213084] get property:                   irq_in, value:0x00000003
[    2.219382] get property:                  irq_out, value:0x00000005
[    2.225672] get property:              power_level, value:0x00000001
[    2.232009] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[    2.247805] get property:                  gpio_cd, str:
[    2.247834] get property:               gpio_power, str:
[    2.252736] get property:                  pinname, str:sd
[    2.258176] get property:                 jtag_pin, str:
[    2.263432] get property:                card_type, value:0x00000005
[    2.269745] get property:                gpio_dat3, str:
[    2.274991] get property:               gpio_volsw, str:
[    2.337924] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    2.337963] aml_sd_emmc_probe: line 2954
[    2.357880] [aml_is_card_insert] card OUT

[    2.357918] [aml_is_card_insert] card OUT
[    2.357918] [    2.378125] aml_sd_emmc_reg_init 677
[    2.378233] pdata->caps 80000d47
[    2.379265] pdata->caps2 80a1
[    2.382191] get property:                ocr_avail, value:0x00200080
[    2.388491] get property:                    f_min, value:0x00061a80
[    2.394782] get property:                    f_max, value:0x05f5e100
[    2.401083] get property:             max_req_size, value:0x00020000
[    2.407377] get property:                  pinname, str:emmc
[    2.412988] get property:                card_type, value:0x00000001
[    2.419286] get property:                gpio_dat3, str:
[    2.424539] get property:                 hw_reset, str:
[    2.437826] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.438846] dwc_otg: Indeed it is in host mode hprt0 = 00001101
[    2.487809] aml_emmc_hw_reset 1356
[    2.487811] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    2.487962] ion_dev has 1 memory regions
[    2.500059] fb: osd_init_module
[    2.500135] fb: viu vsync irq: 35
[    2.501478] meson-fb has 1 memory regions
[    2.506592] meson-fb meson-fb: assigned reserved memory node linux,meson-fb ok
[    2.512605] fb: osd_probe vinfo:ffffffc001c4d930
[    2.517157] fb: Frame buffer memory assigned at
[    2.521477] fb:     phy: 0x78000000, vir:0xffffff8003c00000, size=98304K
[    2.528359] fb: osd_set_res_bootargs : mode 12
[    2.532742] fb: fb def : 1920 1080 1920 2160 32
[    2.537170] fb: init fbdev bpp is:32
[    2.540768] fb: ---------------clear fb0 memory
[    2.556010] emmc: BKOPS_EN bit is not set
[    2.557909] [aml_sd_voltage_switch] switch to 1.8V for a non-uhs device.

[    2.573418] fb: osd[0] canvas.idx =0x40
[    2.573419] fb: osd[0] canvas.addr=0x78000000
[    2.573421] fb: osd[0] canvas.width=7680
[    2.573422] fb: osd[0] canvas.height=2160
[    2.576257] emmc: clk 100000000 SDR mode tuning start
[    2.576462] rx_tuning_result[0][0] = 10
[    2.576667] rx_tuning_result[0][1] = 10
[    2.576869] rx_tuning_result[0][2] = 10
[    2.577070] rx_tuning_result[0][3] = 10
[    2.577274] rx_tuning_result[0][4] = 10
[    2.577477] rx_tuning_result[0][5] = 10
[    2.577680] rx_tuning_result[0][6] = 10
[    2.577888] rx_tuning_result[0][7] = 10
[    2.578111] rx_tuning_result[0][9] = 10
[    2.578113] best_win_start =9, best_win_size =9
[    2.578115] sd_emmc_regs->gclock =0x100024a, sd_emmc_regs->gadjust =0x32000
[    2.578117] emmc: gclock =0x100024a, gdelay=0x72547276
[    2.578118] gadjust=0x32000
[    2.578232] emmc: try set sd/emmc to DDR mode
[    2.578235] emmc: try set sd/emmc to DDR mode
[    2.578238] emmc: clk 100000000 DDR mode tuning start
[    2.579184] rx_tuning_result[0][0] = 10
[    2.580079] rx_tuning_result[0][1] = 10
[    2.580975] rx_tuning_result[0][2] = 10
[    2.581175] best_win_start =0, best_win_size =3
[    2.581177] sd_emmc_regs->gclock =0x1000245, sd_emmc_regs->gadjust =0x12000
[    2.581179] emmc: gclock =0x1000245, gdelay=0x72547276
[    2.581180] gadjust=0x12000
[    2.581247] emmc: new HS400 MMC card at address 0001
[    2.581249] emmc: clock 100000000, 8-bit-bus-width
[    2.581249]  [    2.581553] mmcblk0: emmc:0001 8GND3R 7.28 GiB 
[    2.581987]  mmcblk0: p1 p2
[    2.606613] Console: switching to colour frame buffer device 240x67
[    2.758480] hub 1-1:1.0: USB hub found
[    2.768314] hub 1-1:1.0: 4 ports detected
[    2.769629] fb: Frame buffer memory assigned at
[    2.769630] fb:     phy: 0x7e000000, vir:0xffffff8001980000, size=1024K
[    2.786215] fb: osd probe OK
[    2.786382] vout_serve: vout_init_module
[    2.790107] vout_serve: meson_vout_probe
[    2.793929] vout_serve: create vout attribute OK
[    2.798539] ge2d: ge2d_init_module
[    2.801961] ge2d: ge2d_dev major:244
[    2.805546] ge2d: ge2d clock is 400 MHZ
[    2.809189] ge2d: ge2d: pdev=ffffffc05dad2800, irq=182, rstc=0xffffffc05b23f700, clk=ffffffc05da9fc00
[    2.818358] ge2d: mapped phy: 0xd0160000
[    2.822205] ge2d: ge2d start monitor
[    2.825813] ge2d: ge2d workqueue monitor start
[    2.825897] codec:Amlogic A/V streaming port init
[    2.826483] codec:get gate demux control ok ffffffc05b245e80
[    2.826486] codec:get gate parser_top control ok ffffffc05b245f80
[    2.826493] codec:get gate vpu_intr control ok ffffffc05b247080
[    2.826498] codec:get gate vdec control ok ffffffc05b247180
[    2.826660] codec:[tsync_pcr_init]init success.
[    2.826694] codec:regist mpeg12 codec profile
[    2.826726] codec:regist mpeg4 codec profile
[    2.826727] codec:amvdec_vc1 module init
[    2.826757] codec:regist vc1 codec profile
[    2.826758] codec:amvdec_h264 module init
[    2.826807] codec:regist h264 codec profile
[    2.826809] codec:amvdec_h264mvc module init
[    2.826839] codec:regist hmvc codec profile
[    2.826840] codec:amvdec_h264_4k2k module init
[    2.826870] codec:regist h264_4k2k codec profile
[    2.826872] codec:amvdec_h265 module init
[    2.826902] codec:regist hevc codec profile
[    2.826935] codec:regist mjpeg codec profile
[    2.826936] codec:amvdec_real module init
[    2.826966] codec:regist real codec profile
[    2.826967] codec:amvdec_avs module init
[    2.827000] codec:regist avs codec profile
[    2.827037] amvenc_avc_probe -- reserved memory config fail.
[    2.827039] amvenc_avc - cma memory pool size: 32 MB
[    2.827053] encode_wq_init.
[    2.827056] encode start monitor.
[    2.827117] encode workqueue monitor start.
[    2.827210] jpegenc module init
[    2.827304] codec:picdec_driver_probe called.
[    2.827306] picdec has 1 memory regions
[    2.827325] picdec picdec: assigned reserved memory node linux,picdec ok
[    2.827326] codec:picdec_driver_probe done.
[    2.827327] codec:reserved memory config fail , use CMA      .
[    2.829505] codec:cma memory is 64c00000 , size is  3000000
[    2.829848] codec:0 addr is 64c00000################
[    2.829856] codec:1 addr is 64efd000################
[    2.830000] switch_vpu_mem_pd: vpu_arb ON
[    2.830207] codec:create_ge2d_work_queue video task ok
[    2.830453] codec:register clk_set_setting cpu[31]
[    2.830652] di_module_init ok.
[    2.830656] di_module_init: major 240
[    2.830775] di_probe
[    2.830848] deinterlace has 1 memory regions
[    2.830869] di reveser memory 0x76200000, size 30MB.
[    2.830875] deinterlace deinterlace: assigned reserved memory node linux,di ok
[    2.830975] rdma_register, rdma_table_addr ffffff800047a000 rdma_table_addr_phy 6004a000 reg_buf ffffffc05b28c000
[    2.830977] rdma_register success, handle 1 table_size 8192
[    2.830979] di_probe allocate rdma channel 1.
[    2.830982] DI hw version 2.
[    2.830990] 0x000000c3:Y=c3,U=0,V=0
[    2.830991] 0x000000c4:Y=c4,U=0,V=0
[    2.830993] 0x000000c5:Y=c5,U=0,V=0
[    2.830994] 0x000000c6:Y=c6,U=0,V=0
[    2.830995] 0x000000c7:Y=c7,U=0,V=0
[    2.830997] 0x000000c8:Y=c8,U=0,V=0
[    2.830998] 0x000000c9:Y=c9,U=0,V=0
[    2.831001] 0x000000ca:Y=ca,U=0,V=0
[    2.831002] 0x000000cb:Y=cb,U=0,V=0
[    2.831004] 0x000000cc:Y=cc,U=0,V=0
[    2.831006] 0x000000cd:Y=cd,U=0,V=0
[    2.831007] 0x000000ce:Y=ce,U=0,V=0
[    2.831009] 0x000000cf:Y=cf,U=0,V=0
[    2.831135] di_probe here.
[    2.831147] switch_vpu_mem_pd: di_pre OFF
[    2.831290] efusekeynum: 4
[    2.831297] efusekeyname:             mac    offset:     0   size:     6
[    2.831302] efusekeyname:          mac_bt    offset:     6   size:     6
[    2.831307] efusekeyname:        mac_wifi    offset:    12   size:     6
[    2.831311] efusekeyname:            usid    offset:    18   size:    16
[    2.831386] efuse efuse: probe OK!
[    2.831503] 6aml_unifykeys_init done!
[    2.831504] ppmgr module init func called
[    2.831536] ppmgr_driver_probe called
[    2.831539] ppmgr has 1 memory regions
[    2.831546] init ppmgr memsource 74200000->761fffff
[    2.831656] ppmgr_probe done
[    2.831840] ionvideo-000: V4L2 device registered as video13
[    2.831846] [dsp]register dsp to char divece(257)
[    2.832091] amaudio: driver amaudio succuess!
[    2.832094] amlvideo_init called
[    2.832095] amlvideo_create_instance called
[    2.832097] v4l2_dev.name=:amlvideo-000
[    2.832150] amlvideo-000: V4L2 device registered as video10
[    2.832151] 
[    2.832151] 
[    2.832151]  VECM init
[    2.832151] 
[    2.832406] saradc c1108680.saradc: initialized by BL30
[    2.832408] saradc c1108680.saradc: calibration start:
[    2.832455] saradc c1108680.saradc: nominal=0, value=8
[    2.832501] saradc c1108680.saradc: nominal=256, value=254
[    2.832547] saradc c1108680.saradc: nominal=512, value=510
[    2.832592] saradc c1108680.saradc: nominal=768, value=766
[    2.832638] saradc c1108680.saradc: nominal=1023, value=1021
[    2.832640] saradc c1108680.saradc: calibration end: coef=4096
[    2.832679] remote: Driver init
[    2.833005] aml-thermal aml-sensor@0: min state:500000 400 1 2
[    2.833170] aml-thermal aml-sensor@0: not found gpucore node
[    2.833176] aml-thermal aml-sensor@0: gpu coef:437, pp:3
[    2.838215] aml-thermal aml-sensor@0: cdev1 set upper to 3
[    2.838218] aml-thermal aml-sensor@0: cdev2 set upper to 3
[    2.838221] aml-thermal aml-sensor@0: cdev0 set upper to 3
[    2.841238] input: cec_input as /devices/virtual/input/input0
[    2.841414] cectx c810023c.aocec: aml_cec_probe(): can't find hdmirx
[    2.842242] 6--------------------------------------------------------
[    2.842244] 6odroid_sysfs_init(321) : Sleep Enable !!
[    2.842245] 6--------------------------------------------------------
[    2.842370] input: vt-input as /devices/virtual/input/input1
[    2.842426] 6Virtual-Key input driver registered!!
[    2.842819] adbattery: android dummy battery driver loaded
[    2.843150] enter aml_soc_platform_pcm2bt_probe
[    2.843365] divider=16,frac=33920000,SDMval=4523
[    2.843464] enter aml_pcm_dai_probe
[    2.843493] [aml-spdif-dai]enter aml_dai_spdif_init
[    2.843542] aml_spdif_probe
[    2.843630] enter spdif_dit_probe
[    2.844207] odroid_hdmi_snd odroid_hdmi: dit-hifi <-> I2S mapping ok
[    2.844749] GACT probability on
[    2.844753] Mirror/redirect action on
[    2.844754] u32 classifier
[    2.844755]     Performance counters on
[    2.844756]     input device check on
[    2.844757]     Actions configured
[    2.844855] TCP: cubic registered
[    2.845217] NET: Registered protocol family 10
[    2.845938] mip6: Mobile IPv6
[    2.845941] sit: IPv6 over IPv4 tunneling driver
[    2.846592] NET: Registered protocol family 17
[    2.846607] NET: Registered protocol family 15
[    2.846639] Bridge firewalling registered
[    2.846710] Bluetooth: RFCOMM TTY layer initialized
[    2.846722] Bluetooth: RFCOMM socket layer initialized
[    2.846738] Bluetooth: RFCOMM ver 1.11
[    2.846743] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.846744] Bluetooth: BNEP filters: protocol multicast
[    2.846750] Bluetooth: BNEP socket layer initialized
[    2.846751] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.846757] Bluetooth: HIDP socket layer initialized
[    2.846773] NET: Registered protocol family 35
[    2.846900] Key type dns_resolver registered
[    2.847259] Registering SWP/SWPB emulation handler
[    2.847500] registered taskstats version 1
[    2.847553] AppArmor: AppArmor sha1 policy hashing enabled
[    2.847576] regulator-dummy: disabling
[    2.847664] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.848584] 6enter meson_pm_probe!
[    2.848651] meson_pm_probe done
[    2.848837] ALSA device list:
[    2.848839]   #0: ODROID-HDMI
[    3.495258] Freeing unused kernel memory: 872K (ffffffc001ad0000 - ffffffc001baa000)
[    3.525939] systemd-udevd[103]: starting version 215
[    3.530463] random: systemd-udevd: uninitialized urandom read (16 bytes read, 100 bits of entropy available)
[    3.687132] random: nonblocking pool is initialized
[    3.917897] raid6: int64x1    518 MB/s
[    4.087883] raid6: int64x2    830 MB/s
[    4.257815] raid6: int64x4   1310 MB/s
[    4.427841] raid6: int64x8   1403 MB/s
[    4.486216] switch_vpu_mem_pd: viu_vd1 OFF
[    4.490040] switch_vpu_mem_pd: afbc_dec OFF
[    4.493817] switch_vpu_mem_pd: di_post OFF
[    4.497579] switch_vpu_mem_pd: viu_vd2 OFF
[    4.597837] raid6: neonx1     910 MB/s
[    4.767814] raid6: neonx2    1462 MB/s
[    4.937798] raid6: neonx4    1901 MB/s
[    5.107828] raid6: neonx8    1989 MB/s
[    5.111548] raid6: using algorithm neonx8 (1989 MB/s)
[    5.115262] raid6: using intx1 recovery algorithm
[    5.119782] xor: measuring software checksum speed
[    5.217799]    8regs     :  2846.000 MB/sec
[    5.317798]    8regs_prefetch:  2612.000 MB/sec
[    5.417797]    32regs    :  3467.200 MB/sec
[    5.517797]    32regs_prefetch:  2940.800 MB/sec
[    5.521344] xor: using function: 32regs (3467.200 MB/sec)
[    5.535550] bio: create slab <bio-1> at 1
[    5.539792] Btrfs loaded
[    5.543426] BTRFS: selftest: Running btrfs free space cache tests
[    5.547453] BTRFS: selftest: Running extent only tests
[    5.552601] BTRFS: selftest: Running bitmap only tests
[    5.557643] BTRFS: selftest: Running bitmap and extent tests
[    5.563272] BTRFS: selftest: Free space cache tests finished
[    5.568859] BTRFS: selftest: Running extent buffer operation tests
[    5.574793] BTRFS: selftest: Running btrfs_split_item tests
[    5.581748] BTRFS: selftest: Running find delalloc tests
[    5.830047] BTRFS: selftest: Running btrfs_get_extent tests
[    5.833797] BTRFS: selftest: Running hole first btrfs_get_extent test
[    6.071280] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: data=writeback
[    6.211678] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.223763] systemd[1]: Detected architecture 'arm64'.
[    6.250560] systemd[1]: Inserted module 'autofs4'
[    6.255721] systemd[1]: Set hostname to <odroidc2>.
[    6.403316] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.418275] systemd[1]: Expecting device dev-ttyS0.device...
[    6.427781] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.434497] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.441859] systemd[1]: Starting Remote File Systems (Pre).
[    6.452203] systemd[1]: Reached target Remote File Systems (Pre).
[    6.457385] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.471231] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.479773] systemd[1]: Starting Encrypted Volumes.
[    6.489431] systemd[1]: Reached target Encrypted Volumes.
[    6.494133] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.501890] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.509654] systemd[1]: Starting Paths.
[    6.519152] systemd[1]: Reached target Paths.
[    6.523853] systemd[1]: Expecting device dev-mmcblk0p1.device...
[    6.533910] systemd[1]: Starting Root Slice.
[    6.543793] systemd[1]: Created slice Root Slice.
[    6.548697] systemd[1]: Starting User and Session Slice.
[    6.558831] systemd[1]: Created slice User and Session Slice.
[    6.563928] systemd[1]: Starting Delayed Shutdown Socket.
[    6.574663] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.579883] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.591890] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.598451] systemd[1]: Starting Journal Socket (/dev/log).
[    6.609505] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.615086] systemd[1]: Starting udev Control Socket.
[    6.625949] systemd[1]: Listening on udev Control Socket.
[    6.631317] systemd[1]: Starting udev Kernel Socket.
[    6.642269] systemd[1]: Listening on udev Kernel Socket.
[    6.647735] systemd[1]: Starting Journal Socket.
[    6.658890] systemd[1]: Listening on Journal Socket.
[    6.664434] systemd[1]: Starting System Slice.
[    6.675703] systemd[1]: Created slice System Slice.
[    6.681270] systemd[1]: Started File System Check on Root Device.
[    6.687192] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    6.698858] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.704973] systemd[1]: Starting system-getty.slice.
[    6.716244] systemd[1]: Created slice system-getty.slice.
[    6.721738] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.732992] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.739099] systemd[1]: Starting Increase datagram queue length...
[    6.751954] systemd[1]: Starting Restore / save the current clock...
[    6.766108] systemd[1]: Mounting Huge Pages File System...
[    6.778778] systemd[1]: Mounting POSIX Message Queue File System...
[    6.794330] systemd[1]: Starting Load Kernel Modules...
[    6.808662] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.824916] fuse init (API version 7.22)
[    6.825076] systemd[1]: Starting udev Coldplug all Devices...
[    6.842920] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    6.843452] systemd[1]: Mounting Debug File System...
[    6.862982] systemd[1]: Started Set Up Additional Binary Formats.
[    6.868866] systemd[1]: Starting LSB: Set keymap...
[    6.880652] systemd[1]: Starting Slices.
[    6.891332] systemd[1]: Reached target Slices.
[    6.902829] systemd[1]: Mounted Debug File System.
[    6.913259] systemd[1]: Mounted POSIX Message Queue File System.
[    6.924002] systemd[1]: Mounted Huge Pages File System.
[    6.935084] systemd[1]: Started Increase datagram queue length.
[    6.946917] systemd[1]: Started Restore / save the current clock.
[    6.959152] systemd[1]: Started Load Kernel Modules.
[    6.970631] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.987249] systemd[1]: Started LSB: Set keymap.
[    6.994929] systemd[1]: Time has been changed
[    7.029950] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.043494] systemd[1]: Mounting Configuration File System...
[    7.055945] systemd[1]: Starting Apply Kernel Variables...
[    7.068917] systemd[1]: Mounting FUSE Control File System...
[    7.081563] systemd[1]: Starting Syslog Socket.
[    7.092936] systemd[1]: Listening on Syslog Socket.
[    7.098346] systemd[1]: Starting Journal Service...
[    7.116189] systemd[1]: Started Journal Service.
[    7.184514] systemd-udevd[205]: starting version 215
[    7.353503] Driver for 1-wire Dallas network protocol.
[    7.525252] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro
[    7.619138] ionvideo open
[    7.784520] Adding 131068k swap on /var/swap.  Priority:-1 extents:2 across:139260k SS
[    7.817839] ionvideo_stop_generating!!!!
[    7.817862] ionvideo release
[    7.921558] systemd-journald[204]: Received request to flush runtime journal from PID 1
[    8.309850] vout_serve: vmode set to 1080p60hz
[    8.309850] 
[    8.309861] vout_serve: don't set the same mode as current.
[    8.328343] fb: osd[1] canvas.idx =0x43
[    8.328345] fb: osd[1] canvas.addr=0x7e000000
[    8.328347] fb: osd[1] canvas.width=128
[    8.328348] fb: osd[1] canvas.height=32
[    8.354734] vout_serve: vmode set to 1080p60hz
[    8.354734] 
[    8.354744] vout_serve: don't set the same mode as current.
[    8.417197] Registered IR keymap rc-empty
[    8.417367] input: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0/input2
[    8.418553] rc0: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0
[    8.423217] IR NEC protocol handler initialized
[    8.443330] IR RC6 protocol handler initialized
[    8.445460] IR RC5(x) protocol handler initialized
[    8.445480] IR JVC protocol handler initialized
[    8.445906] IR Sony protocol handler initialized
[    8.447516] IR SANYO protocol handler initialized
[    8.450980] meson-ir c8100580.meson-ir: AO_RTI_PIN_MUX : 0x19801
[    8.450987] meson-ir c8100580.meson-ir: receiver initialized
[    8.452231] lirc_dev: IR Remote Control driver registered, major 235 
[    8.453983] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
[    8.453986] IR LIRC bridge handler initialized
[    8.454856] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input3
[    8.455064] IR MCE Keyboard/mouse protocol handler initialized

Debian GNU/Linux 8 odroidc2 ttyS0 

 

 

 

Meson chip version = RevB (1F:B - 0:0)

[aml_is_card_insert] card OUT

[aml_is_card_insert] card OUT

aml_sd_emmc_reg_init 677

 

Yours:

Meson chip version = RevC (1F:C - 0:0)

[aml_is_card_insert] card IN
[aml_is_card_insert] card IN
normal card in
aml_sd_emmc_reg_init 677

 

Crash where mine do this: 

ionvideo-000: V4L2 device registered as video13
[dsp]register dsp to char divece(257)
amaudio: driver amaudio succuess!
amlvideo_init called
amlvideo_create_instance called
v4l2_dev.name=:amlvideo-000
amlvideo-000: V4L2 device registered as video10

I am experiencing exactly the same issue with my C2, booting form eMMC, upgrading and rebooting twice.

 

I have completely disabled the video system in boot.ini since you indicated above it might be connected to the video system. The problem still persists.

I have downloaded the beat image for Odroid C2, burned it onto the eMMC module using Etcher and booted the device.

Everything seems to work fine, apt-get update / upgrade do not show any updates besides some unimportant libraries.

Rebooting twice, three times, ... works all fine.

 

Can you draw any conclusion from this?

Will there be an updated headless Debian Jessie image any time soon?

I've been able to get it to work by installing the linux-firmware-image-odroidc2 package after an apt-get upgrade. 

Hm, this does not work for me. What I did:

  • Fresh install of Jessie Server, 5.21 image
  • boot
  • apt-get update, sudo apt-get upgrade
  • apt-get install linux-firmware-image-odroidc2
  • reboot -> everything allright
  • reboot -> blue light, stuck at boot

 

Hm, this does not work for me. What I did:

  • Fresh install of Jessie Server, 5.21 image
  • boot
  • apt-get update, sudo apt-get upgrade
  • apt-get install linux-firmware-image-odroidc2
  • reboot -> everything allright
  • reboot -> blue light, stuck at boot

 

 

Yes, this is known to break on some boards withing eMMC. Please try images from beta section since they are done differently.

Hi Igor,

 

as stated above, beta image works fine (the 5.24 Xenial Image).

 

I'd love to run a headless Debian Jessie, but there is no image yet. Do you have an estimate on when you will be able to release it?

 

Best,

Simon

 

Hm, this does not work for me. What I did:

  • Fresh install of Jessie Server, 5.21 image
  • boot
  • apt-get update, sudo apt-get upgrade
  • apt-get install linux-firmware-image-odroidc2
  • reboot -> everything allright
  • reboot -> blue light, stuck at boot

 

Hmm sorry about that. It must have been that combined with something else I did because one of my boards is working and the others ran into this same issue. 

 

Edit:

I putzed around a bit more and found that running 

apt-get install --reinstall linux-dtb-odroidc2 linux-firmware-image-odroidc2 linux-headers-odroidc2 linux-image-odroidc2 linux-jessie-root-odroidc2 linux-u-boot-odroidc2-default

after the upgrade seems to get it working.

 

It is probably best to wait for Igor to fix things though :)

I'll try replace those images within next couple of hours and post a note here when done.

 

Okay, great, thank you so much!

@andrwmorph indeed, reinstalling all packages resolves the problem for me. Thanks for sharing!

 

@Igor: any news with the packages? Do you expect any problems if I now install 5.21 from the Debian Jessie image, upgrade with above method, and later on update to 5.24 once you have it released?

Hi Igor,

thanks for the answer, then I'll wait for the new images.

 

/Simon

Guest
This topic is now closed to further replies.
Go to topic listing

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.