July 5, 20233 yr 3 minutes ago, hotnikq said: please get the DEV Partition from image v5 from the flashed device!!!! i have changed it the partition table now as below, I had change the root partition to 0x00010800 refer to unpacked v4 image @hotnikq Edited July 5, 20233 yr by mvpwar
July 5, 20233 yr Author 3 minutes ago, mvpwar said: which would cause the partition table keep the same LOL! did you fix it? I'm at work now, can you recompile and test?
July 5, 20233 yr Author OK the V5 image address is 0x00010800 you will need to flash the root.img in this address please change it on the table Edited July 5, 20233 yr by hotnikq
July 5, 20233 yr 1 minute ago, hotnikq said: LOL! did you fix it? I'm at work now, can you recompile and test? NO, the kernel can not be loaded, though I change the partition ,the same result
July 5, 20233 yr Just now, hotnikq said: OK the V5 image address is 0x00010800 you will need to flash the root.img in this address please change it on the table Not useful, I had tried many times @hotnikq
July 5, 20233 yr Author please try to flash V5 image to an flash drive and put it on usb 3.0 port Release Version v0.5DEBIAN12 BETA Release Version v0.5ARMBIAN23 BETA
July 5, 20233 yr I asked the seller that the device (h96 max v56 4gb/32gb) had some version of Linux and he sent me that useless image, I made many changes to make it work but I still need to fix the size of the Root partition (6gb)
July 5, 20233 yr 1 minute ago, Kenneth Hidalgo said: but I still need to fix the size of the Root partition (6gb) the root partition enlarge is very easy, just enlarge the rootfs partition (change the parameter.txt, like root:grow), and resize2fs root block @Kenneth Hidalgo
July 5, 20233 yr 9 minutes ago, hotnikq said: please try to flash V5 image to an flash drive and put it on usb 3.0 port how to flash the v5 image to a U stick device? @hotnikq
July 5, 20233 yr 3 minutes ago, Kenneth Hidalgo said: where do i find that .txt parameter.txt flashed the file to parameter by RKDevTool, and run it , login to debian10.10 , sudo resize2fs /dev/????p6 ,i forget it @Kenneth Hidalgo Edited July 5, 20233 yr by mvpwar
July 5, 20233 yr 2 minutes ago, Kenneth Hidalgo said: I flash the file to what parameter, can you explain it to me? this 10 minutes ago, mvpwar said: parameter.txt 429 B · 1 download flashed the file to parameter by RKDevTool, and run it , login to debian10.10 , sudo resize2fs /dev/????p6 ,i forget it @Kenneth Hidalgo
July 5, 20233 yr Author 1 hour ago, mvpwar said: how to flash the v5 image to a U stick device? @hotnikq Balena etcher
July 5, 20233 yr Author 1 hour ago, mvpwar said: Edited 45 minutes ago by mvpwar You need to mark write by address flag!!!!!
July 5, 20233 yr 19 minutes ago, hotnikq said: You need to mark write by address flag!!!!! I replied to @Kenneth Hidalgo, not to you
July 5, 20233 yr 1 hour ago, hotnikq said: Balena etcher when I selected the v5 update.img , the Balena etcher alert the image has no partition table , and I still flashed to the U stick, and boot fail thought the u-boot foud the usb device @hotnikq debug message as below U-Boot 2017.09-g32ed8ff-210328-dirty #pc (Apr 21 2021 - 20:51:20 +0800) Model: Rockchip RK3568 Evaluation Board PreSerial: 2, raw, 0xfe660000 DRAM: 7.7 GiB Sysmem: init Relocation Offset: ed39f000, fdt: eb9f8e18 Using default environment Hotkey: ctrl+` dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0 Bootdev(atags): mmc 0 MMC0: HS200, 200Mhz PartType: EFI boot mode: None FIT: No fdt blob No resource partition No resource partition Failed to load DTB Failed to get kernel dtb, ret=-19 io-domain: OK Model: Rockchip RK3568 Evaluation Board rockchip_set_serialno: could not find efuse/otp device CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 390000 KHz gpll 1188000 KHz cpll 1000000 KHz npll 24000 KHz vpll 24000 KHz hpll 24000 KHz ppll 100000 KHz armclk 816000 KHz aclk_bus 150000 KHz pclk_bus 50000 KHz aclk_top_high 300000 KHz aclk_top_low 200000 KHz hclk_top 150000 KHz pclk_top 50000 KHz aclk_perimid 300000 KHz hclk_perimid 150000 KHz pclk_pmu 50000 KHz Net: No ethernet found. Hit key to stop autoboot('CTRL+C'): 0 ## Booting FIT Image FIT: No fit blob FIT: No FIT image ANDROID: reboot reason: "(none)" optee api revision: 2.0 TEEC: Waring: Could not find security partition Not AVB images, AVB skip No valid android hdr Android image load failed Android boot failed, error -1. MMC error: The cmd index is 1, ret is -110 Card did not respond to voltage select! mmc_init: -95, time 10 switch to partitions #0, OK mmc0(part 0) is current device Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** starting USB... Bus dwc3@fcc00000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus dwc3@fd000000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus dwc3@fcc00000 for devices... 1 USB Device(s) found scanning bus dwc3@fd000000 for devices... cannot reset port 1!? 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device No ethernet found. missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-rockchip No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default No ethernet found. Config file not found No ethernet found. No ethernet found. Edited July 5, 20233 yr by mvpwar
July 5, 20233 yr Author 7 hours ago, mvpwar said: the Balena etcher alert the image has no partition Sorry @mvpwar When I said v5 image It's about the v0.5 flash drive image that I have done... I'm not so good with instructions, For me It's hard to give instructions over a forum topic, be better when I have the device to debug. Flash the V5 update.IMG on device And v0.5 SD image on flash drive over USB 3.0 Edited July 5, 20233 yr by hotnikq
July 5, 20233 yr 58 minutes ago, hotnikq said: Flash the V5 update.IMG on device And v0.5 SD image on flash drive over USB 3.0 I had found the problem, and I tried to flashing the other image rock3a_debian_buster_xfce4_arm64_20211113_0127-gpt.img, no work Now I flashed your v0.5 SD image ,the same result @hotnikq U-Boot 2017.09-g32ed8ff-210328-dirty #pc (Apr 21 2021 - 20:51:20 +0800) Model: Rockchip RK3568 Evaluation Board PreSerial: 2, raw, 0xfe660000 DRAM: 7.7 GiB Sysmem: init Relocation Offset: ed39f000, fdt: eb9f8e18 Using default environment Hotkey: ctrl+` dwmmc@fe2b0000: 1, dwmmc@fe2c0000: 2, sdhci@fe310000: 0 Bootdev(atags): mmc 0 MMC0: HS200, 200Mhz PartType: EFI boot mode: None FIT: No fdt blob No resource partition No resource partition Failed to load DTB Failed to get kernel dtb, ret=-19 io-domain: OK Model: Rockchip RK3568 Evaluation Board rockchip_set_serialno: could not find efuse/otp device CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A) apll 816000 KHz dpll 390000 KHz gpll 1188000 KHz cpll 1000000 KHz npll 24000 KHz vpll 24000 KHz hpll 24000 KHz ppll 100000 KHz armclk 816000 KHz aclk_bus 150000 KHz pclk_bus 50000 KHz aclk_top_high 300000 KHz aclk_top_low 200000 KHz hclk_top 150000 KHz pclk_top 50000 KHz aclk_perimid 300000 KHz hclk_perimid 150000 KHz pclk_pmu 50000 KHz Net: No ethernet found. Hit key to stop autoboot('CTRL+C'): 0 ## Booting FIT Image FIT: No fit blob FIT: No FIT image ANDROID: reboot reason: "(none)" optee api revision: 2.0 TEEC: Waring: Could not find security partition Not AVB images, AVB skip No valid android hdr Android image load failed Android boot failed, error -1. MMC error: The cmd index is 1, ret is -110 Card did not respond to voltage select! mmc_init: -95, time 10 switch to partitions #0, OK mmc0(part 0) is current device Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** starting USB... Bus dwc3@fcc00000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus dwc3@fd000000: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus dwc3@fcc00000 for devices... 1 USB Device(s) found scanning bus dwc3@fd000000 for devices... cannot reset port 1!? 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device No ethernet found. missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-rockchip No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default No ethernet found. Config file not found No ethernet found. No ethernet found.
July 5, 20233 yr do you know how to type some command on ttl debug serial mode? I want to check mmc info, but I found the keyboard input can't interupt the u-boot booting, my box only connect the tx,rx,gnd, I remember it works when I ttl debug the orangepi3
July 6, 20233 yr Author 1 hour ago, mvpwar said: do you know how to type some command on ttl debug serial mode? You need to enable console tty over dtb command line So it will wait for interaction Since we use an original Android dtb on uboot.img No console enabled 😅
July 6, 20233 yr Author 3 hours ago, mvpwar said: rock3a_debian_buster_xfce4_arm64_20211113_0127-gpt.img, no work 😮💨 I'm about to buy an 8gb box just to make this image, but I already have a lot of hardware sitting here, including a radxa rock 3A 8gb ram 64gb mmc 1tb nvme, that don't accelerate GPU 😂 (drivers), hardware waiting for some use, tomorrow I'm going to make a socks5 Proxy over isolated docker L3 lan on it just to prevent it from being at the bottom of the drawer Edited July 6, 20233 yr by hotnikq
July 6, 20233 yr 1 hour ago, hotnikq said: So it will wait for interaction No need this interaction, I found I can not type the username and password while the debian10 init finished (this is interaction), I feel that I can't send any data to the ttl terminal can you login the os at serial console when the os Initialization completed @hotnikq Edited July 6, 20233 yr by mvpwar
July 6, 20233 yr Author Can you use the linaro build image to boot from USB? On 8gb device? If you can... You can mount MMC and put the armbian inside, like this tutorial
July 6, 20233 yr 26 minutes ago, hotnikq said: Can you use the linaro build image to boot from USB? On 8gb device? can boot from mmc...no need usb I hadn't even boot kernel6.2, I don't know why you can boot the os without boot.img, it is so difficult @hotnikq Edited July 6, 20233 yr by mvpwar
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.