November 23, 20232 yr I used iperf3 to monitor the LAN perferomance. It seems the LAN Port only runs on 100 Mbit how can I get a 1GBit speed ? Accepted connection from 192.168.xxx.xxx, port 64266 [ 5] local 192.168.xxx.xxx port 5201 connected to 192.168.xxx.xxx port 64267 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 10.7 MBytes 90.1 Mbits/sec [ 5] 1.00-2.00 sec 11.3 MBytes 94.8 Mbits/sec [ 5] 2.00-3.00 sec 11.3 MBytes 94.7 Mbits/sec [ 5] 3.00-4.00 sec 11.3 MBytes 94.9 Mbits/sec [ 5] 4.00-5.00 sec 11.3 MBytes 94.8 Mbits/sec [ 5] 5.00-6.00 sec 11.3 MBytes 94.7 Mbits/sec [ 5] 6.00-7.00 sec 11.3 MBytes 94.7 Mbits/sec [ 5] 7.00-8.00 sec 11.3 MBytes 94.9 Mbits/sec [ 5] 8.00-9.00 sec 11.3 MBytes 94.8 Mbits/sec [ 5] 9.00-10.00 sec 11.3 MBytes 94.9 Mbits/sec [ 5] 10.00-10.04 sec 441 KBytes 95.0 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.04 sec 113 MBytes 94.3 Mbits/sec receiver
December 19, 20232 yr On 11/23/2023 at 7:48 AM, Hubär said: I used iperf3 to monitor the LAN perferomance. We measure this automatically every day: https://github.com/armbian/os?tab=readme-ov-file#latest-smoke-tests-results 970Mbit/sec
January 9, 20242 yr Hello! I am facing the same 100M ethernet speed issue. The TP-Link switch I have auto-negotiates the Rockpi 4B to 100M link speed instead of 1000M. If I manually set it to 1000M in my switch, the link stays down. From ethtool The internet speed is affected too. It used to be around 98 ~ 104 Mbits/s I noticed this behaviour after upgrading from 23.8.1 to 23.11.1 EDIT: A combination of a new ethernet cable and Switch firmware update resolved the issue for me. Edited January 10, 20242 yr by helios
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.