November 28, 20241 yr hello! Can help me about orange 3b, I want to adapt one dts file to my board, how to correctly indicate the names of the pins, the example gives the following sample entry: https://mjmwired.net/kernel/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ how to correctly fix this for my board?
November 28, 20241 yr there is not reset pin on this connecter? unless you change I2C1_SCL_M0/I2C1_SDA_M0 to reset pin, according to your panel's interface define.
November 28, 20241 yr Author This board has support for mpi dsi 2 lines. There are no reset pins on this connector. I thought that I would add a reset and power supply via gpio There in the driver settings you also need VCC-supply and IOVCC-supply
November 28, 20241 yr Author I understand, thank you. But how can I then correctly specify I2C1_SCL_M0 as a reset line?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.