I am unable to boot the latest armbian version on my hummingboard using a MicroSoM i1 rev. 1.5. 

It seems to be an DTB problem. The boot error is "no valid device tree binary"

 

Does anybody have the same problem or a solution?

 

Try now.

This is my output, nothing happens after that:

 

 

U-Boot 2017.11-armbian (Dec 15 2017 - 13:29:26 +0100)

CPU:   Freescale i.MX6SOLO rev1.3 996 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 32C
Reset cause: POR
Board: MX6 Hummingboard
DRAM:  512 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:   FEC
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
1816 bytes read in 121 ms (14.6 KiB/s)
## Executing script at 12000000
0 bytes read in 78 ms (0 Bytes/s)
78 bytes read in 96 ms (0 Bytes/s)
37846 bytes read in 278 ms (132.8 KiB/s)
4333097 bytes read in 363 ms (11.4 MiB/s)
5236152 bytes read in 415 ms (12 MiB/s)
## Loading init Ramdisk from Legacy Image at 14800000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    4333033 Bytes = 4.1 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 18000000
   Booting using the fdt blob at 0x18000000
   Using Device Tree in place at 18000000, end 1800c3d5

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
 

 

Mount SD card on some Linux and add:

fdt_file=imx6dl-hummingboard-som-v15.dtb

or if you have HB2

fdt_file=imx6dl-hummingboard2-som-v15.dtb

to the /boot/armbianEnv.txt

If you have eMMC version then imx6dl-hummingboard-emmc-som-v15.dtb and imx6dl-hummingboard2-emmc-som-v15.dtb

Thank you for your quick response, unfortunately this does not solve the problem.

I am not using a HB2, so i added the line 

15 hours ago, Igor said:

fdt_file=imx6dl-hummingboard-som-v15.dtb

the resulting armbianEnv.txt is attached

 

 

armbianEnv.txt

 

Update:

 

I am able to login using HDMI and a Keyboard. Serial Terminal still does not work.

59 minutes ago, sescsen said:

I am able to login using HDMI and a Keyboard.

 

Nice!

 

59 minutes ago, sescsen said:

Serial Terminal still does not work.

Known (upstream) bug, AFAIK unresolved.

Ok, thank you!

 

I would like to host a wifi access point, but it seems like there is a Problem with the ti wl18xx driver modules. 

Is this known?

Dont know anything about this wireless chip found on recent boards. All mine have old Broadcomm chips which works. Perhaps only firmware is missing?

Wrote on mobile