Good afternoon. I bought a NanoPi R76s rev. 2 (3GB RAM + 0 EMMC). It works fine with the manufacturer's firmware. However, it doesn't boot on Armbian (26.02.1). I assume rev. 2 isn't supported. Is it possible to add support?
 

Armbian_26.2.1_Nanopi-r76s_noble_vendor_6.1.115_gnome_desktop.img.xz

Скрытый текст

 

---

my build from tag 26.02.1: (log https://paste.armbian.com/poduzitifu )

Скрытый текст

 

---

vendor ubuntu boot log https://drive.google.com/file/d/1OZqZk48LsbSzFz63fcqMKVp5YkhyNOoT/view?usp=drive_link (rk3576-sd-ubuntu-noble-gnome-desktop-6.1-arm64-20260403.img.gz)

Скрытый текст

 

 

Edited April 13Apr 13 by vlw

Hello @vlw,

 

Pull latest from build framework, compile and retry, we migrate R76S to use mainline uboot due a issue with uboot vendor.

 

Let's update us.

 

Hi @SuperKali!
26.8.0-trunk.52 resolute GNOME + vendor 6.1.115 - unbootable, UART doesn't work
26.2.5 resolute CLI + edge 7.0.1 - unbootable, UART doesn't work
26.2.1 noble CLI + vendor 6.1.115 - boot OK, HDMI OK, UART OK

looks like mainline uboot doesn't work now on rolling releases

I tested it personally and works, so the issue is on your side.

Try erase emmc or flash it directly

 

I'll check tonight which revision i have.

Could you tell me where you found the revision number? I don't see anything written on my board.

 

11 часов назад, SuperKali сказал:

Try erase emmc or flash it directly

my model without emmc (3 ram + 0 emmc). Could that be the reason?

 

 

1 час назад, SuperKali сказал:

Could you tell me where you found the revision number? I don't see anything written on my board.

I apologize for the misinformation; I checked my board, and the revision number isn't listed there either.

I'm flashing the image to a microSD card using Armbiam Imager

doesn't boot:







works OK:

Fixing is on the way https://github.com/armbian/build/pull/9908, after merging, i generate new images.