Hi,

 

I've installed Debian Wheezy with 4.0.5 kernel on my BPI and connected an 1To hd with sata.

When i try to mount it, i get : "mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program"

 

I can mount it on my other server ubuntu 14.04 LTS with no error.

 

Do you have an idea why i can not mount it on BPI ?

Maybe it's due to the Guid Partition Table ?

 

Tks

 

Nerek

GPT is supported, that's not a problem. What do you have if you type:

 

cat /proc/partitions

Here's what i get :

major minor  #blocks  name

 179        0    7782400 mmcblk0
 179        1    7781376 mmcblk0p1
   8        0  976762584 sda
   8        1  976760832 sda1

 

I have the same problem with 4.0.5 kernel. Old kernel is ok, but there is another issue with wifi. After kernel upgrade my system hangs and when I booted from SD and try to mount SATA filesystem I got this:

[ 1046.318010] ata1.00: configured for UDMA/133 (device error ignored)
[ 1046.318062] ata1.00: device reported invalid CHS sector 0
[ 1046.318164] ata1: EH complete
[ 1046.323039] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1046.323078] ata1.00: irq_stat 0x40000000
[ 1046.323109] ata1.00: failed command: FLUSH CACHE EXT
[ 1046.323175] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 3
         res 61/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1046.323211] ata1.00: status: { DRDY DF ERR }
[ 1046.323236] ata1.00: error: { ABRT }
[ 1046.327870] ata1.00: configured for UDMA/133 (device error ignored)
[ 1046.327927] ata1.00: device reported invalid CHS sector 0
[ 1046.328085] blk_update_request: I/O error, dev sda, sector 0
[ 1046.328168] JBD2: recovery failed
[ 1046.328209] EXT4-fs (sda1): error loading journal
[ 1046.328221] ata1: EH complete
root@lamobo:~#

Ok, i manage to make it work.

Neither "sudo mount /dev/sda1 /mnt' nor OpenMediaVault were working but "sudo mount -t ext4 /dev/sda1 /mnt" worked.

 

Tks anyway for your help and for your release

 

[ 1046.323236] ata1.00: error: { ABRT } [ 1046.327870] ata1.00: configured for UDMA/133 (device error ignored) [ 1046.327927] ata1.00: device reported invalid CHS sector 0 [ 1046.328085] blk_update_request: I/O error, dev sda, sector 0 [ 1046.328168] JBD2: recovery failed [ 1046.328209] EXT4-fs (sda1): error loading journal [ 1046.328221] ata1: EH complete root@lamobo:~#

are you shure to have sufficentky provide power ?

 

 

ssd can  consume +1Amp while booting from it...

 

i.e:

banapi r1 = 1amp

wifi another 1amp

and the ssd aother 1amp

.. at boot

 

 

 

 

 

 

 

[ 1046.323236] ata1.00: error: { ABRT } [ 1046.327870] ata1.00: configured for UDMA/133 (device error ignored) [ 1046.327927] ata1.00: device reported invalid CHS sector 0 [ 1046.328085] blk_update_request: I/O error, dev sda, sector 0 [ 1046.328168] JBD2: recovery failed [ 1046.328209] EXT4-fs (sda1): error loading journal [ 1046.328221] ata1: EH complete root@lamobo:~#

are you shure to have sufficentky provide power ?

 

 

ssd can  consume +1Amp while booting from it...

 

i.e:

banapi r1 = 1amp

wifi another 1amp

and the ssd aother 1amp

.. at boot

 

 

 

 

 

 

 

When I use old kernel, SATA works without problems, wifi works too, but unstable. (Igor Pecovnik confirmed, that old kernel has the wifi issue). I have 3A power supply + usb power meter, peak current is ca 1,5A. I dont´t know, how SATA is powered, maybe there is possibility increase power software way, I don't know.

When I use old kernel, SATA works without problems, wifi works too, but unstable. (Igor Pecovnik confirmed, that old kernel has the wifi issue). I have 3A power supply + usb power meter, peak current is ca 1,5A. I dont´t know, how SATA is powered, maybe there is possibility increase power software way, I don't know.

 

i use igors lib to build my own fully patched kernels ...

and that works fine.

 

root@fw1 ~ # vgs

  VG    #PV #LV #SN Attr   VSize   VFree

  fsys1   1   2   0 wz--n- 119,24g 81,54g

root@fw1 ~ # lsmod

Module                  Size  Used by

nfsd                  245319  2

exportfs                3340  1 nfsd

ax88179_178a           13488  0

usbnet                 23171  1 ax88179_178a

arc4                    1598  2

rtl8192cu              90112  0

rtl_usb                11843  1 rtl8192cu

rtl8192c_common        57293  1 rtl8192cu

rtlwifi                81947  3 rtl_usb,rtl8192c_common,rtl8192cu

mac80211              296619  3 rtl_usb,rtlwifi,rtl8192cu

root@fw1 ~ # uname -a

Linux fw1 3.19.3-rc5bpi #1 SMP Sun Feb 8 09:58:58 UTC 2015 armv7l GNU/Linux

fw1 ~ #

 

Today working on latest build 4.0.x .. :-)

i use igors lib to build my own fully patched kernels ...

and that works fine.

 

root@fw1 ~ # vgs

  VG    #PV #LV #SN Attr   VSize   VFree

  fsys1   1   2   0 wz--n- 119,24g 81,54g

root@fw1 ~ # lsmod

Module                  Size  Used by

nfsd                  245319  2

exportfs                3340  1 nfsd

ax88179_178a           13488  0

usbnet                 23171  1 ax88179_178a

arc4                    1598  2

rtl8192cu              90112  0

rtl_usb                11843  1 rtl8192cu

rtl8192c_common        57293  1 rtl8192cu

rtlwifi                81947  3 rtl_usb,rtl8192c_common,rtl8192cu

mac80211              296619  3 rtl_usb,rtlwifi,rtl8192cu

root@fw1 ~ # uname -a

Linux fw1 3.19.3-rc5bpi #1 SMP Sun Feb 8 09:58:58 UTC 2015 armv7l GNU/Linux

fw1 ~ #

 

Today working on latest build 4.0.x .. :-)

And the question is..... :-) Is it possible to download yours kernel somewhere?

And the question is..... :-) Is it possible to download yours kernel somewhere?

 

i can put that on my dropbox once tested.

 

currently compiling an full moduarised kernel ON the R1 - no crosscompile - using the ssd as compile storage.

i can put that on my dropbox once tested.

 

currently compiling an full moduarised kernel ON the R1 - no crosscompile - using the ssd as compile storage.

So happy compiling :-) Let me know pls., when your kernel will be ready :-) Thanks!!!!

that will take some time  days to get an sufficent MODED kernel .config  that lets build , compile errors will reported to igors Lib as allways.