@Igor

can you tell me is it enough?
(what i wrote in two previous posts)

9 hours ago, vobo70 said:

can you tell me is it enough?

 

Its enough to convince me the problem is real, but the main problem remains - I have no time to deal with this in a near future. 

OK. Take you time; no hurry.

@Igor

 

Any news?

 

f you still run out of time could you plaase tell mi when it will be possible?

I checked this image:

 

Armbian_20.05.0-trunk.133_Bananapipro_buster_current_5.4.40_minimal.img

 

and both my SSD and HDD are visible:

 

Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Disk model: SanDisk SSD PLUS
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

 

but wifi does not work in this build

On 5/12/2020 at 7:53 AM, vobo70 said:

Any news?

 

- news for users

- support terms

- communication rules

 

According to our tiny capacity which you don't support and existing plans I think this task might be addressed fastest by the end of the year https://armbian.atlassian.net/browse/AR-191 It might not be big, but it require time and focus. Perhaps the same amount then answering on this post.

Thanks, but it's working now for both my BPi Pro (either SSDs or HDDs)

On 5/14/2020 at 9:35 PM, vobo70 said:

but wifi does not work in this build

Better create a new topic for this issue and dont forget to add a up-to-date armbianmonitor -u output.

This one can so be marked as virtual solved.

On 5/14/2020 at 9:35 PM, vobo70 said:

I checked this image:

 

Armbian_20.05.0-trunk.133_Bananapipro_buster_current_5.4.40_minimal.img

 

Hi, where did you got that image?

Just now, bommel said:

Hi, where did you got that image?

 

Quote

trunk

 

Self-built using the build script: https://github.com/armbian/build

Same:
[    2.659400] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator
[    2.659660] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator
   
focal:
Linux bananapipro 5.10.60-sunxi #21.08.2 SMP Tue Sep 14 16:28:44 UTC 2021 armv7l armv7l armv7l GNU/Linux
ii  binutils-arm-linux-gnueabihf     2.34-6ubuntu1.1                   armhf        GNU binary utilities, for arm-linux-gnueabihf target
ii  linux-base                       4.5ubuntu3.6                      all          Linux image base package
ii  linux-dtb-current-sunxi          21.08.2                           armhf        Linux DTB, version 5.10.60-sunxi
ii  linux-image-current-sunxi        21.08.2                           armhf        Linux kernel, version 5.10.60-sunxi
ii  linux-libc-dev:armhf             21.08.1                           armhf        Armbian Linux support headers for userspace development
ii  linux-u-boot-bananapipro-current 21.08.2                           armhf        Uboot loader 2021.07
ii  selinux-policy-default           2:2.20190201-8                    all          Strict and Targeted variants of the SELinux policy
ii  selinux-utils                    3.0-1build2                       armhf        SELinux utility programs

Notes:

0. Correct connection (not over otg), 2 boards, 2 ssds, focal+bionic, bpi+bpipro images tested.

1. The error says about "AHCI not found".
"/proc/device-tree/" has a node "ahci-5v" and no "ahci".

2. My board in bananapipro same as
https://forum.armbian.com/topic/9578-my-armbian-does-not-see-my-ssd/?do=findComment&comment=72002

 

(Not the BP1 / not Pro)
https://forum.armbian.com/topic/9578-my-armbian-does-not-see-my-ssd/?do=findComment&comment=71999

3. It worked with older images (~2018-2019). Back from times when there were a mixup between lemaker banana pi and banana pro.

4. With bpi focal image (not PRO) comes the notorios power up failed:
[    2.695063] ahci-sunxi 1c18000.sata: PHY power up failed.
[    2.695422] ahci-sunxi: probe of 1c18000.sata failed with error -5
PS: I tried the BPI image because back then in another thread manually installing `linux-u-boot-bananapipro-next` (and now linux-u-boot-bananapipro-current) actually solved the problem (plus copying pro dtb to bananapi).

 

4. I have 2 boards, so both are currently unusable.

 

5. To compile a kernel I don't have any machine with required spec. Maybe a single working kernel could be provided by others who solved this by compiling? Thank you for your/any efforts/help.

 

[Happy new Year!]

followup here: