Updated armbian-config v5.81

March 11, 20197 yr

 apt update && apt -y upgrade

1. armbian-config -> software -> softy

Home Assistant smart home suite (https://www.home-assistant.io/hassio)
OpenHAB2 smart home suite (https://www.openhab.org)

Bug fixes:

Syncthing
ZSH
Internet detection also works behind proxy

Cosmetical fixes:

UrBackup
Transmission

Removed:

Exagear (EOL)

2. armbian-config -> personal -> mirror

New mirror http://mirrors.dotsrc.org/armbian-apt/ & http://mirrors.dotsrc.org/armbian-dl/

3

March 11, 20197 yr

The headline still shows

"Armbian 5.75 stable"

March 12, 20197 yr

Author

13 hours ago, hjoe said:

The headline still shows

"Armbian 5.75 stable"

BSP package, where this info is pulled, hasn't changed. Read https://github.com/armbian/build/pull/1129 for more details about naming problems.

March 12, 20197 yr

17 hours ago, hjoe said:

The headline still shows

"Armbian 5.75 stable"

for more information about the versions of your armbian-system-packages you could add the following to your
/etc/update-motd.d/10-armbian-header

ARMBIAN_bsp=$(more /etc/armbian-release|grep VERSION|cut -f 2 -d '=')
ARMBIAN_kernel=$(dpkg -s linux-image-$BRANCH-$LINUXFAMILY|grep Version|cut -f 2 -d ' ')
ARMBIAN_uboot=$(dpkg -s linux-u-boot-$BOARD-$BRANCH|grep Version|cut -f 2 -d ' ')
ARMBIAN_dtb=$(dpkg -s linux-dtb-$BRANCH-$LINUXFAMILY|grep Version|cut -f 2 -d ' ')
ARMBIAN_firmware=$(dpkg -s armbian-firmware|grep Version|cut -f 2 -d ' ')
ARMBIAN_config=$(dpkg -s armbian-config|grep Version|cut -f 2 -d ' ')

printf 'ARMBIAN bsp      : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_bsp"
printf 'ARMBIAN kernel   : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_kernel"
printf 'ARMBIAN u-boot   : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_uboot"
printf 'ARMBIAN dtb      : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_dtb"
printf 'ARMBIAN firmware : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_firmware"
printf 'ARMBIAN config   : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_config"

printf '\n'
printf 'ARMBIAN kernel   : \e[0;91m%s\x1B[0m   u-boot : \e[0;91m%s\x1B[0m   dtb : \e[0;91m%s\x1B[0m   firmware : \e[0;91m%s\x1B[0m  config : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_kernel" "$ARMBIAN_uboot" "$ARMBIAN_dtb" "$ARMBIAN_firmware" "$ARMBIAN_config"
printf '\n'

this will give you the armbian-system-package-informations in different lines or

at the end in one line like in the attached image

1

March 12, 20197 yr

3 hours ago, Igor said:

BSP package, where this info is pulled, hasn't changed. Read https://github.com/armbian/build/pull/1129 for more details about naming problems.

did read (most of) this thread, Thanks. I just started using Armbian so everything is new.

March 12, 20197 yr

only added the second last printf, and of course the variable initialisation

1

March 13, 20197 yr

I like the armbian-system-packages armbian header information. Will modify my rock64 to output the additional information. Thanks for the tip!

On 3/12/2019 at 9:31 PM, guidol said:

for more information about the versions of your armbian-system-packages you could add the following to your
/etc/update-motd.d/10-armbian-header


ARMBIAN_bsp=$(more /etc/armbian-release|grep VERSION|cut -f 2 -d '=')
ARMBIAN_kernel=$(dpkg -s linux-image-$BRANCH-$LINUXFAMILY|grep Version|cut -f 2 -d ' ')
ARMBIAN_uboot=$(dpkg -s linux-u-boot-$BOARD-$BRANCH|grep Version|cut -f 2 -d ' ')
ARMBIAN_dtb=$(dpkg -s linux-dtb-$BRANCH-$LINUXFAMILY|grep Version|cut -f 2 -d ' ')
ARMBIAN_firmware=$(dpkg -s armbian-firmware|grep Version|cut -f 2 -d ' ')
ARMBIAN_config=$(dpkg -s armbian-config|grep Version|cut -f 2 -d ' ')

printf 'ARMBIAN bsp      : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_bsp"
printf 'ARMBIAN kernel   : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_kernel"
printf 'ARMBIAN u-boot   : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_uboot"
printf 'ARMBIAN dtb      : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_dtb"
printf 'ARMBIAN firmware : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_firmware"
printf 'ARMBIAN config   : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_config"

printf '\n'
printf 'ARMBIAN kernel   : \e[0;91m%s\x1B[0m   u-boot : \e[0;91m%s\x1B[0m   dtb : \e[0;91m%s\x1B[0m   firmware : \e[0;91m%s\x1B[0m  config : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_kernel" "$ARMBIAN_uboot" "$ARMBIAN_dtb" "$ARMBIAN_firmware" "$ARMBIAN_config"
printf '\n'

this will give you the armbian-system-package-informations in different lines or

at the end in one line like in the attached image

1

March 15, 20197 yr

I've added the setting to the header but I don't get the Kernel or DTB information. Not sure why.

I put your additional settings at the end of the file.

On 3/12/2019 at 9:31 PM, guidol said:

for more information about the versions of your armbian-system-packages you could add the following to your
/etc/update-motd.d/10-armbian-header


ARMBIAN_bsp=$(more /etc/armbian-release|grep VERSION|cut -f 2 -d '=')
ARMBIAN_kernel=$(dpkg -s linux-image-$BRANCH-$LINUXFAMILY|grep Version|cut -f 2 -d ' ')
ARMBIAN_uboot=$(dpkg -s linux-u-boot-$BOARD-$BRANCH|grep Version|cut -f 2 -d ' ')
ARMBIAN_dtb=$(dpkg -s linux-dtb-$BRANCH-$LINUXFAMILY|grep Version|cut -f 2 -d ' ')
ARMBIAN_firmware=$(dpkg -s armbian-firmware|grep Version|cut -f 2 -d ' ')
ARMBIAN_config=$(dpkg -s armbian-config|grep Version|cut -f 2 -d ' ')

printf 'ARMBIAN bsp      : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_bsp"
printf 'ARMBIAN kernel   : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_kernel"
printf 'ARMBIAN u-boot   : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_uboot"
printf 'ARMBIAN dtb      : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_dtb"
printf 'ARMBIAN firmware : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_firmware"
printf 'ARMBIAN config   : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_config"

printf '\n'
printf 'ARMBIAN kernel   : \e[0;91m%s\x1B[0m   u-boot : \e[0;91m%s\x1B[0m   dtb : \e[0;91m%s\x1B[0m   firmware : \e[0;91m%s\x1B[0m  config : \e[0;91m%s\x1B[0m\n' "$ARMBIAN_kernel" "$ARMBIAN_uboot" "$ARMBIAN_dtb" "$ARMBIAN_firmware" "$ARMBIAN_config"
printf '\n'

this will give you the armbian-system-package-informations in different lines or

at the end in one line like in the attached image

On 3/12/2019 at 9:31 PM, guidol said:

March 15, 20197 yr

if config, u-boot and firmware does work then kernel and dtb should also work..

whats the result of

ECHO $BRANCH

and

ECHO $LINUXFAMILY

?

March 16, 20197 yr

Did create a more compact version for me (and you?)

nano /etc/update-motd.d/10-armbian-header

ARMBIAN_bsp=$(more /etc/armbian-release|grep VERSION|cut -f 2 -d '=')
ARMBIAN_kernel=$(dpkg -s linux-image-$BRANCH-$LINUXFAMILY|grep Version|cut -f 2 -d ' ')
ARMBIAN_uboot=$(dpkg -s linux-u-boot-$BOARD-$BRANCH|grep Version|cut -f 2 -d ' ')
ARMBIAN_dtb=$(dpkg -s linux-dtb-$BRANCH-$LINUXFAMILY|grep Version|cut -f 2 -d ' ')
ARMBIAN_firmware=$(dpkg -s armbian-firmware|grep Version|cut -f 2 -d ' ')
ARMBIAN_config=$(dpkg -s armbian-config|grep Version|cut -f 2 -d ' ')

printf '\n'
printf 'pkg-version kernel[\e[0;91m%s\x1B[0m] u-boot[\e[0;91m%s\x1B[0m] dtb[\e[0;91m%s\x1B[0m] firmware[\e[0;91m%s\x1B[0m] config[\e[0;91m%s\x1B[0m]\n' "$ARMBIAN_kernel" "$ARMBIAN_uboot" "$ARMBIAN_dtb" "$ARMBIAN_firmware" "$ARMBIAN_config"
printf '\n'

2

March 19, 20197 yr

On 3/12/2019 at 12:31 PM, guidol said:

for more information about the versions of your armbian-system-packages you could add the following to your
/etc/update-motd.d/10-armbian-header

That was an excellent tip, thank you very much! :thumbup:

1

April 20, 20197 yr

Author

Another update:

April 21, 20197 yr

Author

Desktop package was not installed when changing beta/stable repository. Fixed

May 3, 20197 yr

Author

v5.84

Added CPU speed and governor management
Fixed TVheadend install on Ubuntu
Improving two-factor authentication: once enabled, token is one for all local users
Added Meson64 overlay config (hardware configuration)

1

Updated armbian-config v5.81

Featured Replies

Similar Content

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)