SBC News

rockchip64/edge 6.3.y: manually fix Radxa E25/CM3 patches, rebase to v6.3.3, update .config fix E25/CM3 patches from https://github.com/armbian/build/pull/5165#issuecomment-1560666066 rebase all patches to v6.3.3, archeology for missing mboxes update .config, no actual changes Still trying to keep edge clean & patching working... View the full article

Description I copied patches from rockchip64-6.1 to rockchip64-6.3 and made the following changes: deleted patch/kernel/archive/rockchip64-6.3/board-rock3a-cec.patch since upstream merged deleted patch/kernel/archive/rockchip64-6.3/board-rock3a-gmac1.patch since upstream merged deleted patch/kernel/archive/rockchip64-6.3/board-rock3a-pcie.patch since upstream merged deleted patch/kernel/archive/rockchip64-6.3/general-enhance-backport-es8328-driver.patch because this patch is for station p1 and upstream device tree don't need it modified patch/kernel/archive/rockchip64-6.3/board-pbp-add-dp-alt-mode.patch to match upstream changes. modified patch/kernel/archive…

Enhancing the graphic software stack for the Raspberry Pi. View the full article

Description A recent couple of patches, introduced in mainline kernel 6.1 to fix some rk356x emmc detection, break the detection of some old emmc parts on rk322x. This PR reverts the kernel 6.1 patches until some more investigations are done to better understand the nature of the issue and if it can be solved without disturbing the mainline kernel. Anyway this is confined into rk322x family, so anyone else is not affected by. How Has This Been Tested? [x] Built full image and tested on the problematic rk322x device Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, parti…

Description Maint. View the full article

Description This would enable uboot BTRFS support to allow booting from a sole BTRFS root/boot partition. With this feature u-boot.itb file size increase from 826K to 902K. AFAIK this size increase is not an issue given that we have almost 8MB space for uboot before the first partition. How Has This Been Tested? [x] Compile [x] Boot rk3318 box with sole BTRFS root partition Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dep…

Description Allow building firmware for doubleshot again View the full article

Description Update shellcheck to version 0.10.0 which was released a few weeks ago. How Has This Been Tested? [x] sudo lib/tools/shellcheck.sh Output: Running shellcheck version: 0.10.0 against 308 config files, severity 'SEVERITY=error', please wait... Congrats, no error's detected in config/sources. Running shellcheck version: 0.10.0 against 'compile.sh' -- lib/ checks, severity 'SEVERITY=critical', please wait... All params: --check-sourced --color=always --external-sources --format=tty --shell=bash --severity=warning --exclude=SC2034 --exclude=SC2207 --exclude=SC2046 --exclude=SC2086 --exclude=SC2206 Congrats, no critical's detected in lib/ code. Checklist: [x]…

In these times of disruption and uncertainty, how about some positive news for a change? Let's take a moment to celebrate the newest members of our engineering and administration teams: Mylène, Christopher, Melissa, Ricardo and Leandro! View the full article

Description Maint View the full article

rockchip-6.1: fix xt-q8l-v10-remote-keymap.patch mbox formatting; rebase against 6.1.0 this patch had "half-mbox" formatting first a bare patch (no mbox headers, From/Subject etc) then an mbox-formatted patch this causes the 1st/bare patch to be lost when parsing/applying this file with a proper mbox-enabled tool This is meant for @paolosabatino 's appreciation since it's his patch. View the full article

odroidhc4: bump to u-boot v2024.04; drop most defconfig patches in favor of hooks odroidhc4: bump to u-boot v2024.04; drop most defconfig patches in favor of hooks add pre_config_uboot_target hook for switching BOOTCONFIG across the two targets adapt UBOOT_TARGET_MAP to not call the defconfig Makefile targets directly, instead, just do a variable assignment (ignored by Make) otherwise, when using the defconfig directly in the UBOOT_TARGET_MAP, the post_config_uboot_target .config changes are overwritten when Make is called only patch left is boot usb-nvme-scsi/sata first (still done in meson64.h) remove FIP handling from family file meson-sm1.conf into board file hoo…

Description Fix the peripheral aliases to ensure consistent allocation when enabled, so that kernel assignment matches the numbering convention of the SOC. This targets the Allwinner A10 and A20 and ensures, that for example if enabling UART2 exposes it correctly in userspace as ttyS2 rather than dynamically assigning it to the first avaliable ttySx slot. Secondly spidev overlays creates an instance of spidevX.Y based on the bus specified with armbianEnv.txt however it does not correctly configure the corresponding pins into spi mode. To resolve this the individual spi bus overlays have been include in the makefile. The desired bus must be enabled alongside spidev or sepe…

With the upcoming 0.5 release, WirePlumber's Lua scripts will be transformed with the new Event Dispatcher. More modular and extensible with very little redundant processing, they will look and feel completely different. View the full article

Description Continuing from https://github.com/armbian/build/pull/6229 RK repo is dead, moving to pure mainline bump EDGE to 6.10.y disable broken patches update kernel config AR-2015 How Has This Been Tested? [x] Boot device with kernel 6.10.3 [x] Boot device with kernel 6.6.44 Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Embedded World 2020 was a lonely affair with many companies canceling attendance due to COVID-19, and Embedded World 2021 took place online only. But Embedded World is back to Nuremberg, Germany in 2022 albeit with the event moved from the traditional month of February to June 21-23. Embedded systems companies and those that service them will showcase their latest solution at their respective booths, and there will be a conference with talks and classes during the three-day event. The programme is up, so I made my own little Embedded World 2022 virtual schedule as there may be a few things to learn, even though I won’t be attending. Tuesday, June 21, 2022 10:00 – 13:00 – …

Building GTK 4 as a Meson subproject for your own application is not only useful for Windows builds, but also for many Linux distributions that do not yet package a recent enough version of GTK 4 and/or its dependencies. View the full article

Welcome to the latest Armbian Newsletter: your source for the latest developments, community highlights, and behind-the-scenes updates from the world of open-source ARM and RISC-V computing. Armbian has released images based on Ubuntu 26.04 LTS, codenamed Resolute Raccoon the latest long-term support base. As always, Armbian applies its own platform-optimized kernel, board-specific patches, and tested drivers on top so what you get is a clean, stable foundation across SBCs, PCs, and cloud environments, with no Snap packages, fully compatible with the Ubuntu ecosystem, and no surprises. SPONSORED …

Description switched to most recent upstream source fixed wrong header location For 5.19.y and up there is a lot more work, so this will wait for someone else. Jira reference number AR-1316 How Has This Been Tested? [x] Build sunxi and sunxi64 CURRENT Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Maint. How Has This Been Tested? [x] Compile test Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description sunxi-5.19: update megous patches and switch to v5.19.5 Checklist: [x] Test buil sunxi [x] Test build sunxi64 View the full article

Description Since latest changes to the partition handling we need to add new dependency to the build host & docker as builds are failing. Jira reference number AR-1332 How Has This Been Tested? [x] Starting from a clean Docker image Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Maintaining View the full article

No descriptionView the full article

Description Minor fix for MGLRU armhf patch on kernel v5.17 and v5.18 How Has This Been Tested? [x] Kernel compilation completes Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Spotpear’s Raspberry Pi Zero 2 W to Raspberry Pi 3/4 adapters would not exist in a “normal” world of abundance that still existed a little less than 3 years ago. But I suppose extraordinary times require extraordinary adapters… If you have a spare Raspberry Pi Zero 2 W lying around but would rather like getting the ports from a Raspberry Pi 3 or Raspberry Pi 4, Spotpear has designed three adapters that can also be used as USB docks from a computer or mobile phone. The first adapter the “ZERO to 4B” will get you a Raspberry Pi 4-looking SBC with a Raspberry Pi RP3A0 system-in-package (Quad-core Cortex-A53 CPU + 512 MB RAM), and most of the same ports, except only three US…

Description Enable Docker support. Failing. How Has This Been Tested? [ ] Docker install Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Closes #3759 How Has This Been Tested? N/A Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number AR-1690 How Has This Been Tested? Testing is WIP right now. [X] Booted on Nanopiduo2. U-boot reports starting of crust and also shows crust version Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes hav…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. Document(README.md) change no need unit test Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My…

Description Debian moved riscv64 into 1st class so exceptions are not needed. But ports repository is still needed in the lists file as they didn't manage to move everything. Jira reference number AR-1824 How Has This Been Tested? [x] Generated image with clean rootfs Armbian_23.08.0-trunk_Star64_sid_edge_5.15.0.img Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description station-m3: move to rockchip-rk3588 family. Add UEFI_EDK2 support for station-m3. Remove the fan control binary file because automatic fan control has been added in this commit. How Has This Been Tested? [x] Almost all hardware functions(HDMI, WiFi, BT, GbE, USB...). [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View th…

Description Add two patches from upstream megous. Fix add and remove uwe-bsp node for sun50i-h6-orangepi-3-lts.dts Checklist: [ ] Test build sunxi64 [ ] Test build sunxi View the full article

Description Update meson64-edge/general-meson-aiu-Fix-HDMI-codec-control-selection.patch patch for Kernel 5.15.7+ Updated for work with this patch: commit 1d29b712efb6ec044547a01cd2cfb69af47a21a9 Author: Mark Brown <broonie@kernel.org> Date: Thu Apr 21 13:38:02 2022 +0100 diff --git a/sound/soc/meson/aiu-codec-ctrl.c b/sound/soc/meson/aiu-codec-ctrl.c index c3ea733fce91..c966fc60dc73 100644 --- a/sound/soc/meson/aiu-codec-ctrl.c +++ b/sound/soc/meson/aiu-codec-ctrl.c @@ -57,7 +57,7 @@ static int aiu_codec_ctrl_mux_put_enum(struct snd_kcontrol *kcontrol, snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL); - return 0; + return 1; }…

Description This PR fixed usb_host1_xhci port on Orange Pi 5 Plus with edge kernel. We have to use host mode by default since OPi makes the port USB3 host and connect it to USB hub. Jira reference number [AR-9999] How Has This Been Tested? [x] Build Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

CNXSoft: This is another tutorial using SenseCAP K1100 sensor prototype kit translated from CNX Software Thai. This post shows how computer vision/AI vision can be combined with LoRaWAN using the Arduino-programmable Wio Terminal, a Grove camera module, and LoRa-E5 module connecting to a private LoRaWAN network using open-source tools such as Node-RED and InfluxDB. In the first part of SenseCAP K1100 review/tutorial we connected various sensors to the Wio Terminal board and transmitted the data wirelessly through the LoRa-E5 LoRaWAN module after setting the frequency band for Thailand (AS923). In the second part, we’ll connect the Grove Vision AI module part of the SenseC…

Sparkfun has launched a Satellite Transceiver Kit based on the Swarm M138 satellite and GNSS modem that allows low-bitrate two-way connectivity for IoT projects anywhere on earth. Remote IoT applications have benefited from LPWAN standards such as LoRaWAN and NB-IoT, but in some extreme cases coverage may still be challenging, so satellite communication may be the only practical option. It used to be really expensive, but Swarm makes this more affordable, and companies like SigFox and Semtech also have (or had?) plans to use low-earth orbit satellites for their respective LPWAN technologies. Swarm M138 kit content and specifications: Swarm M138 mini PCIe satellite modem a…

What comes after Qualcomm Robotics RB3, RB5, and RB6 platforms? Apparently, it’s Qualcomm Robotics RB1 and RB2 platforms powered by Qualcomm QRB2210 and Qualcomm QRB4210 processors respectively and optimized for cheaper, smaller robots with lower power consumption. But Qualcomm is one of the lamest companies known to man, so they did not include any photos when announcing the Robotics RB1 and RB2 platforms, so I’ll focus this post on Lantronix Open-Q 2210RB and 4210RB system-in-packages (SiP) based on the same processors, as well as the Open-Q RB1/RB2 development kit. Open-Q 2210RB and 4210RB SiP The new system-in-packages are very similar to the earlier Open-Q 2290CS and…

Fixes Ethernet initialization issue. Description Ethernet MAC was not being set from the hardware serial number. Bumping the version of U-Boot to the latest version fixed this issue. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Compiled and booted via SD Checklist: [ ] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any depende…

Sparkfun NanoBeacon is a module equipped with InPlay IN100 NanoBeacon Bluetooth 5.3 beacon SoC, a Qwicc connector, and a few GPIOs designed to work with Bosch Sensortec BME280 3-in-1 humidity sensor, measuring humidity, air pressure, and ambient temperature, and the BMA400 ultra-low power accelerometer sensor. The IN100 NanoBeacon SoC consumes less than 650nA in sleep mode, supports proprietary, Bluetooth, Google Eddystone, and Apple iBeacon beacon modules, and offers a long range of up to several hundred meters. Sparkfun NanoBoard specifications: Bluetooth Beacon SoC – IN100 NanoBeacon SoC (See datasheet for details) Memory – 4 KB SRAM + 4 Kbit OTP memory Bluetooth 5.3 …

Dear Armbians, Can you smell the Christmas trees? The scent of pine and warmth fills the air As we gather around our devices, connected by a shared passion for innovation and open-source possibilities, it’s time to celebrate not just the festivities but also the incredible work we’ve made together. Here are the highlights for the end of the year! Updates and highlights: Odroid N2 and M1: We’re excited to announce the elevation of Odroid N2 and M1 to standard support, ensuring enhanced performance and stability. Raspberry Pi 5: Raspberry Pi 5 has been added to our standard support list! Liberating our users from Debian/Ubu…

Description This provide an option to set last good kernel for dedicated device. It will prevent upgrading to higher kernels which are known to be broken. For example. At this moment we have Rockchip BSP kernel which was fixed that Radxa ITX has working ports, while this fix will break NVME support on Orangepi. Also this we can use for Pinebook PRO. Configuration: BOARD BRANCH LINUXFAMILY Last good kernel package from repository orangepi5 vendor rk35xx 24.5.3 orangepi5plus vendor rk35xx 24.5.3 orangepi5|vendor|rk35xx|24.5.3 orangepi5plus|vendor|rk35xx|24.5.3 How Has This Been Tested? [x] Test with locally generated repo that contained higer version of kern…

Update maintainers and board status synced status from the database rename to .csc where we don't have anyone If you want to become a board maintainer, adjust data here. Ref: Board Maintainers Procedures and Guidelines View the full article

Description Documenting functional Image Tree Source files. These files are not currently used for any builds. How Has This Been Tested? No test needed, documentary changes View the full article

Description Update odroidxu4-current kernel to 5.4.208. How Has This Been Tested? [x] Reboot of my Odroid HC1 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Since joining the graphics team at Collabora as a Software Engineering Intern last November, I have implemented several Vulkan API extensions for NVK, an open-source Vulkan driver for NVIDIA hardware in Mesa. View the full article

GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how. View the full article

cleanup-space-final-image: keep qcom and qed firmware (for thinkpad-x13s) cleanup-space-final-image: keep qcom and qed firmware (for thinkpad-x13s) View the full article

Description This fixes armbian-firmware-full missing the symlinks from linux-firmware How Has This Been Tested? [x] Build an image with armbian-firmware-full and confirmed the symlinks were there and pointed to the right location Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Update odroidxu4-current kernel to 6.1.76. How Has This Been Tested? not yet, just committing current work. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

RAKwireless RAK2560 WisNode Sensor Hub is a modular sensor gateway based on the RAK4630 WisDuo Stamp module with Nordic Semi nRF52840 Bluetooth 5.0 LE MCU and Semtech SX1262 LoRa/LoRaWAN transceiver and equipped with two sensor probe ports to connect a range of sensors. It ships with various sensors from a temperature and humidity sensor to a water level sensor, and is designed for outdoor operation with an IP66 design, waterproof probe connectors, and the ability to support a solar panel as the power source. RAK2560 WisNode Sensor Hub specifications: Core module – RAK4630 WisDuo Stamp Module with LoRa/LoRaWAN and BLE 5.0 connectivity through nRF52840 MCU and SX1262 radi…

As of today, NVK, the new Vulkan driver for Nvidia GPUs, has landed in the main Mesa branch and will be included as an experimental driver in the 23.3 release of Mesa. View the full article

A few weeks ago, in the final days leading up to Christmas, Linus Torvalds released Linux Kernel 4.20. Collaborans were once again active during this development cycle, contributing 22 patches, 112 reviews & 55 sign-offs. Here's a look at their contributions. View the full article

Description Cracklib check library must be present in minimal variant. Re-adding after recent too intensive packages cleanup. Jira reference number AR-1524 How Has This Been Tested? [x] Generated Debian boolseye minimal Checklist: [x] My code follows the style guidelines of this project [x] Any dependent changes have been merged and published in downstream modules View the full article

We're very excited to be sponsoring and speaking at the very first Linux Developer Conference Brazil, taking place on November 11 at the Instituto de Computação in Campinas! View the full article

Description Maint. View the full article

DFRobot Beetle RP2040 joins other miniature Raspberry Pi RP2040 developments boards such as Pimoroni Tiny 2040 & Adafruit QT Py RP2040, but with only eight GPIOs accessible through larger pads that are easier to solder. The tiny 27 x 20 mm board comes with a USB Type-C port, BOOT and reset buttons, and twelves pads with a through hole each comprised of eight GPIOs, plus VCC, 3.3V, and GNS pads. The Beetle RP2040 is designed to be embedded into small devices or projects, and the company selected I/Os that can be configured as I2C, UART, SPI, GPIOs, analog input, etc… Beetle RP2040 specifications: MCU – Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller@ up to 133…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…

After completing a DIY Raspberry Pi Zero 2 W handheld PC earlier this year, Penk Chen has designed another, rather odd but cool-looking, DIY computer. The “Mainboard Terminal” is a retro-style computer with a round display powered by the mainboard found in Framework modular laptop. The computer has been tested to work with Ubuntu 22.04 out of the box with just a few configuration tweaks for the display, but other operating systems should also work considering the mainboard is based on an Intel Core i5-1135G7, i7-1165G7, or i7-1185G7 Tiger Lake processor. There are four main off-the-shelf electronics components: Framework laptop mainboard ($399 and up) OLKB Preonic Keyboa…

The dawn of VR video players demand new features in terms of projection and hardware access. In his recent R&D work, a Collaboran implemented a way to view spherical videos with GStreamer on a Virtual Reality headset. In this article, he gives his thoughts on VR video and how he created SPHVR, a Python / Gtk VR video player. View the full article

Kernel.org Collabora contributions View the full article

Event Dispatcher, part of the upcoming WirePlumber 0.5 configuration system refactoring, is a custom PipeWire event scheduling mechanism designed to address many of the fundamental issues in WirePlumber. View the full article

Description Pull request #3838 add spi boot support for rock-3a. It can build successfully on my local machine, but build will fail in github workflow environment: https://github.com/amazingfate/armbian-rock3a-images/runs/6648716251?check_suite_focus=true#step:3. After this fix build is ok now: https://github.com/amazingfate/armbian-rock3a-images/runs/6649318129?check_suite_focus=true How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build sucessfully in github workflowwnvironment. Checklist: [x] My code follows the style guidelines of this project [x] I have…

meson64: edge: rework to kernel 5.19 JIRA AR-1231 [x] based on the work done by @adeepn on #3898 -- thanks! [x] took the opportunity to finally remove CONFIG_ARCH_ROCKCHIP=y from meson64 .config [x] bumped to 5.19-rc3 without issue [x] backported a bunch of fixes I had done on 5.10 back in #3154 - namely: [x] remove meson_drv_shutdown revert patch, instead CONFIG_DRM_MESON=y and its dependencies in .config (this allows proper shutdown on non-ODROID, while keeping ODROID rebooting nicely -- reference https://lore.kernel.org/linux-arm-kernel/7h4kfjpe07.fsf@baylibre.com/T/ ) [x] N2(+): do NOT enable SD UHS mode, which cause next-reboot u-boot to not be able to use SD (vo…

Description It depends on https://github.com/armbian/linux-rockchip/pull/76 https://github.com/armbian/build/pull/5519#pullrequestreview-1549880906 Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes h…

Description Bumped legacy, current and edge kernel. Legacy - 5.15.127 -> 5.15.130 Current - 6.1.47 -> 6.1.51 Edge - 6.5 -> 6.5.1 Fixed compilation of xradio and as its working fine, disabled cw1200 driver that I added for edge last week. Refreshed kernel configs. Also uwe5622 patches needed for orange pi 3 lts were not being applied as least kernel version was set to 6.0. Moved it back to 5.15. Not sure if it works though will test next week once I receive my orangepi 3 lts. Also for edge kernel, enabled rtw88 based drivers and disabled their corresponding legacy counterparts. How Has This Been Tested? Please describe the tests that you ran to verify your cha…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Add libvirt support to Vagrantfile [X] Build Bullseye image successfully Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [X] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstre…

this patch will fix ps4 controllers not working correctly on legacy and vendor kernel View the full article

Description also bump: rk3288 xt-q8l-v10 target rk322x-box target (was already v2024.07-rc5) rk3318-box target (was already v2024.07-rc5) rk322x-box and rk3318-box were already at v2024.07, since u-boot v2024.07 has been released some days ago, they have been moved from rc5 to release (see https://github.com/armbian/build/pull/6855) Asus Tinkerboard/S and xt-q8l-v10, which are both rk3288 targets, have been bumped from v2022.04 to v2024.07, trying to keep all the features working. I guess now the workaround cited here could be removed as well. GitHub issue reference: Jira reference number AR-2406 How Has This Been Tested? [x] Built image for both rk3288 targets su…

Presenting a new, hardware-backed, software graphics driver, built upon the Mesa gallium driver framework, which uses kernel kms drm nodes for memory allocation. View the full article

Description armbian-bsp-cli: fix 10-wifi-disable-powermanagement.rules corrected "iw" path made rule better targeted at wifi devices switched from %k (kernel) to $name variable to better integrate with user-provided rules How Has This Been Tested? [x] Tested new rule with actual wifi devices --> udeavdm test /sys/class/net/wlan0 output: Queued commands: RUN{program} : /usr/sbin/iw dev wlan0 set power_save off Checklist: [x] My code follows the style guidelines of this project [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings View the full article

meson64-6.0 kernel patches mbox formatting (git) archeology to find lost authors/descriptions rebase against 6.0.12 no actual changes View the full article

Check out the new GNOME Programming Guidelines and file bugs in Bugzilla. View the full article

Description Package deprecation in Debian SID. Jira reference number AR-1178 View the full article

Description Fixes ethernet broken for some users on 6.x kernels. It was working fine for me on 6.x kernels. For @AGM1968, it was working fine only on cold boot, while for some users from forum it was not working at all. Hence this PR is raised to fix the same by increasing the startup frequency and specifying clock frequency for motorcomm chip How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested by @AGM1968 and also by user on forum that this fixes the broken ethernet [X] In my case, ethernet continues to work fine with this fix as it was working before. C…

Description Maintenance. Jira reference number [AR-9999] How Has This Been Tested? [ ] Tested build at MR View the full article

GStreamer's support for diverse hardware and software platforms extends to its upstream Machine Learning capabilities, exemplified by its cross-platform ONNX Runtime implementation. View the full article

Released earlier this month, the latest version of VLC, the free & open source multimedia player (which also uses the GStreamer framework) now contains SRT modules which had been in development in VLC's master branch. View the full article

Last month I gave a short talk about the Chamelium board from the ChromeOS team, a board that is getting more and more usage outside of Google as it can help you automate the testing of your display (and not only!) code and hardware. View the full article

Description Removed slick-greeter on desktop environments that have gdm3 or sddm installed. Installing slick greeter installs back lightdm as well. On vim4 during first boot with gnome images, lightdm was getting started immediately on boot hiding the firstlogin setup screen. This fixes the same How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested bookworm gnome image on vim4 Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand…

This week's work advances on three fronts: kernel and bleedingedge alignment across Rockchip and Sunxi trees, board and platform enablement spanning RV1106 to SpacemiT, and CI hardening with self-hosted runner maintenance. On the kernel side, bleedingedge was bumped to 7.1-rc3, accompanied by cfg80211 API fixes and re-enablement of the rtl8189fs and rtl8852bs drivers for the new release. Both the rockchip64 and sunxi patch stacks for current and edge were rewritten, an upstream ptrace fix for CVE-2026-46333 was backported to linux-rockchip, and the odroidxu4-current kernel moved to 6.6.139. Platform enablement was broad. The Ayn Odin2 gained 7.0 kernel support, the Mekotr…

Bumps setuptools from 70.1.1 to 70.2.0. Changelog Sourced from setuptools's changelog. v70.2.0 Features Updated distutils including significant changes to support Cygwin and mingw compilers. (#4444) Bugfixes Fix distribution name normalisation (:pep:625) for valid versions that are not canonical (e.g. 1.0-2). (#4434) Commits 3accd5c Bump version: 70.1.1 → 70.2.0 719192a Merge pull request #4430 from pypa/infra/refresh-skeleton e32f8df Merge pull request #4444 from pypa/feature/distutils-f3b225449 343ac6f Merge https://github.com/pypa/distutils into feature/distutils-f3b225449 4e6d97d Prefer relative imports for better portability. 449021c Merge pull request #4…

rpardini's mid-may/`23 pipeline fixes, debs-to-repo, rootfs-repo de-chicken-egg-ize General fixes for GHA/pipelines, produced debs, etc export-logs: add GHA output for logs_url (when SHARE_LOG=yes) github-actions: more logging for GHA actions outputs oci-oras: retry harder, and sleep for more time, if push failed artifacts(debs): include DEBIAN/md5sums and a correct Installed-Size: field in DEBIAN/control (for all debs) artifacts(debs): rationalize "bash hash" creation with new calculate_hash_for_bash_deb_artifact() helper kernel-debs: include "Priority: optional" in all kernel debs (all other packages have it...) also for fake_ubuntu_advantage_tools also include "S…

Description We call ssh-keygen when building with CRYPTROOT=yes, but openssh-client is not mentioned into EXTRA_BUILD_DEPS in extensions/fs-cryptroot-support.sh which can make the build to fail. This PR fixes the same How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Created a build with CRYPTROOT=yes and ARTIFACT_IGNORE_CACHE=yes and made sure it no longer fails because of missing ssh-keygen in docker image Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, parti…

Description Various fixes and improvements to main build train. Jira reference number [AR-9999] How Has This Been Tested? [x] Generating stable images [ ] Generating nighly images Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Bump U-boot to 2023.01. Backported dts patch from 2023.07-rc4 to fix compilation of bigtreetech-cb1 board. Jira reference number AR-1753 How Has This Been Tested? [X] Built images for all of the Maintained and community supported allwinner boards [X] Booted on Nanopiduo2 and checked that crust continues to work fine Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published …

Description enable BTRFS and virtiofs on midstream kernel. View the full article

BPI-M2S is a small form factor SBC based on the Amlogic A311D chipset (or s922x, not supported yet): Amlogic A311D (Quad A73 + Dual A53) CPU 4GB LPDDR4 RAM 16GB eMMC Mali G52-MP4 GPU HDMI 2.1 output 2 Gigabit ports 40 pins GPIO 1x USB-A 2.0 1 USB-C (5V power) Not working/tested: 2nd ethernet port MIPI DSI/CSI Description I created a dts from existing A311D board (vim3 and radxa zero2). I use the radxa zero2 u-boot that allows to launch armbian linux kernel for this board. The dts is basic for now, since I'm not an expert with device trees. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Pleas…

No descriptionView the full article

This does not change the current boot order and requires additional hardware. Hardware used in my testing: BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module Mini PCI-E PCI Express to SATA 3.0 Dual Ports Adapter Converter Hard Drive Extension Card https://a.co/d/0G679qW Kingston 120GB A400 SATA 3 2.5" Internal SSD https://a.co/d/fB2qf3r External power supply for Hard Drive 2.5" 3.5" https://www.ebay.com/itm/114620135743 bananapi: ~ $ lspci 00:00.0 PCI bridge: Synopsys, Inc. DWC_usb3 / PCIe bridge (rev 01) 01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02) bananapi: ~ $ sudo blkid /dev/mmcblk1p1: LABEL="EMMC" UUID="67ea5c62-c9cb-4…

This selection did get disabled by the BUILD_ONLY option implementation This fix will re-enable the KERNEL_ONLY selection for intermediate backward compatibility Description @The-going This PR is due to a comment from @igorpecovnik on #4455, asking, if it was inteded to switch off the interactive KERNEL_ONLY selection. I guess for now we should keep this interactive feature in for backward compatibility. This PR would fix it. This is a followup to fix this introduced by #4455 Test [x] Interactive call of ./compile.sh - the interactive KERNEL_ONLY selection dialog appears again and KERNEL_ONLY=yes is propagated to BUILD_ONLY as expected Checklist: [x] My code follows…

Description Some users reported bluetooth not working sometimes after reboot. Turns out that sometimes hciattach binary that we use segfaults during reboot. Replacing the binary with the one present in orangepi_build repository as it seems it solves the issue. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested by the user by rebooting their device 5 times. Bluetooth worked fine consistently after every reboot. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my cod…

There are already Python editors such as Thonny, but the BBC thought those were not good enough and released a new web-based Python editor specifically designed for the micro:bit education board targeting 11 to 14 years old pupils. The micro:bit Python editor includes drag and drop code examples, code structure & error highlighting, auto-complete feature, a simulator to test the code before uploading it to the micro:bit board, and a Quick ideas section to help pupils get started with projects. The BBC’s micro:bit Python editor works with both the micro:bit V1 and V2, but note the simulator shows a micro:bit V2, so if you are using the previous generation micro:bit, so…

Description As per title and move RK3588 EDGE tag to 6.6.y branch enable EDGE on Khadas Edge 2 Jira reference number AR-1913 How Has This Been Tested? [x] Build test Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject Jira reference number AR-1279 How Has This Been Tested? [x] Successfully built rockchip deb packages Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description The u-boot was tied to a specific tag. Now I am setting it to branch so that updates can be directly pulled into Armbian as well. Also removed a patch that since has been merged into the upstream repository and rebased the patches. The compilation of u-boot used to crash the docker desktop on my macbook, so included a fix for that as well. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh BOARD=khadas-vim4 BRANCH=legacy u-boot Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this pro…

tinkerboard-2: move to "legacy" 21.07 u-boot; firmware & kernel DTS fixes (5.18/19,6.0) notes in the board file about the RAM issues (tested, confirmed working blob change of #4383 by @pinhaozhang working with u-boot 21.07; blobless also works with ATF v2.7 on my known-good-RAM boards) tinkerboard-2: add full firmware, for the rtl8822ce PCIe Wifi default card in the tb2 as shipped by ASUS tinkerboard-2: uboot: rename TARGET_TINKER-2_RK3399 to TARGET_TINKER2_RK3399 to avoid warnings all over tinkerboard-2: slower but working Tinkerboard 2S eMMC (HS400+ES to HS200) both for u-boot and kernel. should not affect 2, only 2S View the full article

Description Quick copy from Focal. Doesn't work properly yet ... Jira reference number AR-1364 How Has This Been Tested? [ ] Made x86 and arm64 image Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description add fxblox-rk1 rk3588 board How Has This Been Tested? Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Hello all, This PR adds support for the Texas Instruments SK-AM62B. Features, schematics, and purchase links can be found on the board page[0]. This board is similar to the already supported SK-AM64B board but with a AM62 SoC. One big difference being the AM62 has a display controller and a GPU (IMG AXE-1-16M). Unfortunately the display controller driver is still being upstreamed and is not supported in the v6.4 kernel, so desktop support will have to wait until that is finished, we set HAS_VIDEO_OUTPUT to "no" for now. Thanks! [0] https://www.ti.com/tool/SK-AM62B Depends on #5543 and #5544 How Has This Been Tested? [x] Build/Boot tested Bookworm CLI/Mi…