SBC News

ROCK PI 4 Model C+ is a single board computer (SBC) by a Rockchip RK3399-T hexa-core processor @ 1.5 GHz, equipped with 4GB RAM, and two micro HDMI ports to drive up to one 4K display, and one 2K display. It is yet another ROCK PI 4 SBC from Radxa, and the first to use the down-clocked RK3399-T processor with other models based on Rockchip OP1 processor clocked at 2.0GHz (overclockable to 2.2/2.4GHz) or the traditional Rockchip RK3399 @ 1.8 GHz (overclockable to 2.0 GHz), and also the first of the family to offer dual HDMI output. ROCK PI 4 Model C+ specifications: SoC – Rockchip RK3399-T big.LITTLE hexa-core processor with 2x Arm Cortex-A72 @ up to 1.5 GHz (up to 2.0 GHz…

Forlinx OKT507-C single board computer for automotive applications is powered by FETT507-C system-in-module equipped with Allwinner T507 industrial processor, 2GB RAM, and 8GB eMMC flash. Allwinner T507 offers the same features as Allwinner H616 for TV boxes with a quad-core Cortex-A53 CPU, a Mali G31 MP2 GPU, and the same I/Os, but the processor is AEC-Q100 certified, supports -40°C to +85°C temperature range, and Allwinner promises over 10 years of longevity. OKT507-C single board computer specifications: FETT507-C System on Module SoC – Allwinner T507 quad-core Cortex-A53 @ 1.5GHz with Arm Mali-G31 MP2 GPU with support for OpenGL ES 3.2/2.0/1.0, Vulkan1.1, OpenCL 2.0; …

DM&P Vortex86DX3 is an x86 embedded processor launched in 2015 that we’ve previously found in single board computers and mini PCs, but I’ve just noticed ICOP was offering the SOM304D3 system-on-module based on the single and dual-core versions of the Vortex86DX3 SoC. The SOM304D3 is available with 1 or 2GB DDR3 RAM, works in a wide temperature range (up to -40°C to +85°C), and is designed for space-constrained industrial applications, especially those requiring legacy interfaces like ISA, IDE, and/or a parallel port (aka printer port). SOM304D3 specifications: SoC – DM&P Vortex86DX3 single or dual-core x86 processor @ 1 GHz, 2D GPU System Memory – 1GB or 2GB DDR3 …

Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset. View the full article

JPEG-XR support on browsing technologies View the full article

Description address wrong target we can expose two targets max Jira reference number AR-1386 How Has This Been Tested? This is fixing after the test Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

No descriptionView the full article

James Brown (aka Ancient) has built a tiny computer inside a LEGO brick with a Raspberry Pi RP2040 microcontroller and a 0.42-inch monochrome OLED display. And yes, it runs Doom. So finally, the LEGO minifigures have access to a computer suitable for their size :). James did not post a lot of information to reproduce the build by yourself, but he still released the “uGrey” code, written in Micropython, to display greyscale on a monochrome OLED. We can learn from the design in a mesmerizing video (embedded at the end of this post) showing how he made a Raspberry Pi RP2040 computer fit into a LEGO brick. The tiny design is comprised of five main boards/modules: Raspberry Pi…

Description config adjustements Jira reference number AR-1573 How Has This Been Tested? [x] Build test Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

We're proud to announce that Monado, the free and open source XR platform, has been accepted as a mentoring organization for XROS, the XR Open Source Fellowship Program. View the full article

esd electronics CAN-PCIeMiniHS/402 is a half-size mini PCIe card with four CAN FD Interfaces designed for embedded systems with one model adding extended temperature range support from -40C to 85°C. The company also introduced the CAN-Mini/402-4-DSUB9-150mm adapter to more easily connect the four CAN network interfaces via DSUB9 connectors. It comes with four individual small adapter boards, each equipped with a DSUB9 plug and a jumper for selectable onboard CAN termination, as well as 150 mm long wires. CAN-PCIeMiniHS/402 highlights: 4x CAN FD interfaces according to ISO 11898-2, no galvanic isolation, bit rates from 10 Kbit/s up to 8 Mbit/s Bus mastering and local data …

Description This reverts commit f952ae89fb2c5e58e566860c74b46e127186f1c2. Breaks artefacts creation. How Has This Been Tested? [x] Tested without View the full article

Description Adding a command that can be used to refresh kernel configs without launching menuconfig interface. This can be helpful to refresh kernel configs when doing kernel upgrades for all kernels being bumped by running in a for loop and can be also be used in some automation to periodically refresh kernel configs How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested by running ./compile.sh BOARD=khadas-vim4 BRANCH=legacy rewrite-kernel-config. It refreshed and updated config/kernel/linux-meson-s4t7-legacy.config file based on the needed updates which …

Description This PR refreshes OPP patches from kernel mailing list and adds automatic fan control support to Khadas Edge 2. Jira reference number [AR-9999] How Has This Been Tested? [x] Fan trip points have been tested. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Add H264/VP8/MPEG2 decoder and RGA2 nodes to RK3588 edge kernel. cc @amazingfate How Has This Been Tested? [x] Built and probed v4l2 device Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Part 3 of the cmtp-responder series with a focus on USB gadgets explores several new elements including a unified build environment with Docker and an example strategy for building and deploying to a target. View the full article

thinkpad-x13s: bump to jhovold's 6.10 (from -rc7) thinkpad-x13s: bump to jhovold's 6.10 (from -rc7) View the full article

Armbian Weekly Leaflet First week of April , 2025 This week’s Armbian update delivers a solid mix of wireless driver enhancements, board refinements, and quality-of-life improvements across the build system. Notably, rtw88 and rtw89 drivers are now enabled for kernel 6.12+, and Radxa Zero 3 receives mainline U-Boot and WiFi upgrades. Rock 3A sees multiple U-Boot tweaks, while NanoPi R3S and Odroid M2 benefit from version bumps and cleanup. Whether you’re maintaining a fleet or tweaking a personal project, there’s plenty in here to streamline your next build. Kernel & Driver Enhancements rtw88 & rtw89 wireless drivers are now enabled for kernel 6.12+ configs. …

Collabora continues to be a key contributor to the Linux kernel, with 125 patches from 21 developers! Highlights include Arm Mali GPU improvements, expanded MediaTek and Rockchip SoC support, Rust integration progress, and new Rockchip video capture functionality. View the full article

Welcome to the latest Armbian Newsletter: your source for the latest developments, community highlights, and behind-the-scenes updates from the world of open-source ARM and RISC-V computing. Armbian v26.5.1 delivers another strong round of improvements across the project, focusing on expanded hardware support, desktop and userland refinements, build framework modernization, and infrastructure enhancements. This release introduces new board images and platform updates, improves Ubuntu 26.04 "Resolute" integration, refines Bianbu desktop support, adds firmware and driver updates including AX210 wireless support, and continues ongoing work to strengthen the build system, CI …

With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear. View the full article

Orlando, USA - from 17/06/2015 to 19/06/2015: we'll be exhibiting at InfoComm 2015, the largest event for professional AV in the world. Collabora booth 5469 View the full article

Description Fix armbian-led-state-save.sh wrong behavior on boards without gpio leds. Jira reference number AR-1263 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Works on boars without leds [ ] Worjs on board with leds (checked odroid-c4) Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have be…

No descriptionView the full article

FriendlyELEC has launched its sixth generation router with the NanoPi R6S equipped with a Rockchip RK3588S processor, two 2.5GbE ports, one Gigabit Ethernet port, and two USB interfaces. But the device will not exactly be limited to router functions as it comes with 8GB RAM, a 32GB eMMC flash, and an HDMI 2.1 port that support up to 8Kp60 video output, not to mention 8K video decoding capability and the integrated 6 TOPS NPU for AI workloads. NanoPi R6S specifications: SoC – Rockchip RK3588S octa-core processor with: CPU – 4x Cortex-A76 cores @ up to 2.4 GHz, four Cortex-A55 cores @ 1.8 GHz GPU – Arm Mali-G610 MP4 quad-core GPU with OpenGL ES3.2 / OpenCL 2.2 / Vulkan1.1 s…

Description To do: in order to get network support it require moving AC200 from Opi3LTS patch / dtsi as its configured differently and additionally patch device tree. Jira reference number AR-1487 How Has This Been Tested? [ ] Boot on device, checked for functions Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

LILYGO T-SIM7080G-S3 is an ESP32-S3 WiFi and Bluetooth IoT board with a SIMcom SIM7080G LTE Cat-M (eMTC), NB-IoT, and GNSS module for low-power long-range connectivity and asset tracking. The board also comes with a 18650 battery holder, a solar panel input, a microSD card slot, a camera port, and several I/Os and provides an alternative to the TTGO T-Beam ESP32 board that relies on LoRaWAN for long-range connectivity instead. LILYGO T-SIM7080G-S3 specifications: Wireless modules Espressif ESP32-S3-WROOM-1-N16R8 module with ESP32-S3 dual-core LX7 microprocessor @ up to 240 MHz with Vector extension for machine learning, 16MB flash, 8MB PSRAM, WiFi 4 and Bluetooth 5 LE/Mes…

AAEON’s UP Squared Pro 7000 Edge fanless mini PC is powered by a choice of Alder Lake-N SoCs from the Processor N50 up to the Intel Core i3-N305 octa-core processor and designed for IoT, automation, robotics, and industrial applications. The system is based on the UP Squared Pro 7000 4-inch SBC and ships up to 16GB LPDDR5, up to 64GB eMMC flash, and supports triple display setups with HDMI, DisplayPort, and USB-C ports. Network connectivity includes two 2.5GbE ports and optional WiFi/Bluetooth and/or 5G/4G cellular modules M.2 expansion slots. UP Squared Pro 7000 Edge mini PC specifications: Alder Lake-N SoC (one or the other) Intel Core i3-N305 octa-core processor up to …

Description One user on the forum (see https://forum.armbian.com/topic/27798-orange-pi-4-lts-default-thermal-trip-point-issues/) found issues with Orange PI 4 LTS thermal trip points. Looking into the problem, it is related to a patch introduced long time ago that changed the thermal trip points away from the vendor (and mainline kernel too) supplied ones. After some stress testing with openssl and mbw combined, my board froze and I had to shutdown it manually, let it cool and restart to have again a working system. It happens that, at least on my and forum user cases, the trip points are not doing what they expect to do. This patch corrects the trip points for Opi4 LT…

Description Update symlink for bluetooth firmware on JetHub D1 Jira reference number AR-2022 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] JetHub D1 build and run ok Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Add AmLogic soc patches for read chip_id and soc information from Secure Monitor call to soc-driver. Enabled by default only for JetHub devices (other needs to be enabled via general-socinfo-sm-4-arm64-dts-meson-add-dts-links-to-secure-monitor-for-.patch.disabled patch) https://lore.kernel.org/linux-arm-kernel/202402221557.ELxBYVKH-lkp@intel.com/T/ Jira reference number AR-2073 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] JetHub works [ ] some other closed-source devices based on axg/gxl/a1 soc works too. Checklist: [X] My code follows the …

Description In order to fullfil the Jira task AR-1988 (Resolve Rockchip patch maintenance nightmare), remove rockpis family in favor of rockchip64 and merge the configuration bits from the family .conf file into the board rockpi-s.conf file. Also removes the legacy patches from the archive Jira reference number AR-1988 How Has This Been Tested? [x] A current kernel image has been produced [x] idbloader has been verified to be matching against the pre-cleanup image [x] /boot/armbianEnv.txt contains the overlay_prefix=rk3308 [x] /boot/boot.cmd matches config/bootscripts/boot-rockpis.cmd [ ] /boot/armbianEnv.txt contains /config/bootenv/rockpi-s.txt Please @brentr check …

Bumps ossf/scorecard-action from 2.3.1 to 2.3.3. Release notes Sourced from ossf/scorecard-action's releases. v2.3.3 [!NOTE] There is no v2.3.2 release as a step was skipped in the release process. This was fixed and re-released under the v2.3.3 tag What's Changed :seedling: Bump github.com/ossf/scorecard/v4 (v4.13.1) to github.com/ossf/scorecard/v5 (v5.0.0-rc1) by @​spencerschrock in ossf/scorecard-action#1366 :seedling: Bump github.com/ossf/scorecard/v5 from v5.0.0-rc1 to v5.0.0-rc2 by @​spencerschrock in ossf/scorecard-action#1374 :seedling: Bump github.com/ossf/scorecard/v5 from v5.0.0-rc2 to v5.0.0-rc2.0.20240509182734-7ce860946928 by @​spencerschrock in oss…

Monado's first stable of release of 2025 is here. From enhanced Android support and driver updates to improved runtime stability and tooling, Collabora's XR team delivered a wide array of improvements for the cross-platform, open source OpenXR runtime. View the full article

To me, an ATX power supply is one of those big boxes delivering 500W+ inside a PC tower, but since it’s not possible to create hardware with much lower power consumption, HDPLEX has designed an ultra-compact 250W passive ATX power supply using the same GaN (Gallium Nitride) technology as found in some tiny USB-C power supplies. With a 170x50x25mm footprint, the company claims it is the world’s smallest ATX PSU, and it is especially well suited to SFF PC enclosures, but it should also work pretty well in other space-constraints applications with a board equipped with an ATX connector, or through an adapter board, or even some RGB LED projects. GaN ATX power supply specific…

Compulab IOT-GATE-IMX8PLUS is a new Arm Linux IoT gateway powered by NXP i.MX 8M Plus SoC with up to 8GB RAM, 128GB storage, and plenty of connectivity options with dual Gigabit Ethernet, WiFi 6, Bluetooth 5.3 LE, and 4G LTE connector, as well as GNNS support and RS485/RS232 interfaces. The new IoT gateway builds upon theArm SystemReady IR certified IOT-GATE-IMX8 industrial gateway, but offers more RAM and storage, a 2.8 TOPS AI accelerator (in the NXP processor), improved connectivity, as well as a DVI-D port for video output. Compulab IOT-GATE-IMX8PLUS specifications: SoC – NXP i.MX8M Plus Quad or Quad-lite quad-core Arm Cortex-A53 processor @ up to 1.8 GHz with Arm Cor…

With the release of virglrenderer 0.8.0, getting accelerated OpenGL within a virtual machine (VM) made a big leap forward. Since virglrenderer-0.7.0, the code base has seen ~600 commits, and Collabora provided more than 80% of these contributions. View the full article

Stuttgart, Germany - From 22/04/2015 to 22/04/2015: We will be exhibiting at the GENIVI Demonstration Showcase during the All Member Meeting. View the full article

This is a continuation of: https://github.com/armbian/build/pull/3984 (by @rpardini ) that has the new board split into the new family - rockchip-rk3588 (as indicated by @igorpecovnik) rock-5b: add initial radxa rock-5b .wip (by @amazingfate); vendor u-boot & vendor kernel uses legacy with Radxa's 5.10 (with no patches added to armbian). CONFIG_VT=y & SKIP_BOOTSPLASH=yes patch by @piter75 in uboot for working 'source' command so boot.scr can be used, and not extlinux rock5 add kernel options by @lanefu Tested on my rock-5b. View the full article

Description CI process build images from repository by default. Sometimes we would need an option to build from sources. View the full article

LOLIN C3 Pico is a tiny (25.4×25.4mm) ESP32-C3 RISC-V board with 2.4 GHz WiFi and Bluetooth Low Energy connectivity, a few I/Os, and LiPo battery support including charging circuitry. I tend to like Wemos/LOLIN boards, because of their small form factor, support for equally tiny shields, and low price. The LOLIN C3 Pico is no exception, and even adds a few features such as an RGB LED, an I2C connector, and support for battery power and charging. LOLIN C3 Pico specifications: SoC – Espressif Systems ESP32-C3FH4 single-core 32-bit RISC-V (RV32IMC) microcontroller up to 160 MHz with 400 KB SRAM, 4MB Flash Connectivity – 2.4 GHz WiFi 4 and Bluetooth 5.0 LE (in SoC) Expansion …

paperd.ink Merlot is a tricolor E-paper display with an open-source hardware control board based on ESP32 wireless SoC that is programmable with Arduino, MicroPython, or the ESP-IDF framework. We first wrote about the paperd.ink 4.2-inch ESP32-based monochrome e-Paper display last year, but the company has now refined its design with the “paperd.ink Classic” replacing the 3D printed enclosure with a vacuum cast enclosure and adding a 1,900 mAh battery. They also launched a new model, the Merlot, based on the same design but with a display supporting three colors: black, white, and red. Merlot specifications: Wireless module – ESP32-WROOM-32 module with ESP32 dual-core pro…

Description This is really not needed default tool. Rely on installation from armbian-config. Jira reference number AR-1461 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

How Has This Been Tested? [x] Build test View the full article

This week, the Debian project takes over Cambridge as MiniDebConf kicks off right in our own British backyard! Organized by Debian project members, MiniDebConfs aim to achieve similar objectives to those of the annual Debian conference, DebConf. View the full article

As of 2024 Feb, Github still no allow a source branch to be renamed. Previous PR https://github.com/armbian/build/pull/6291 was auto closed by Github upon source branch renaming. This new PR supersedes it. Description Running "uefi-x86" board image on qemu-system-x86_64 --display none --serial stdio ... did not: allow GRUB boot without GUI display display early kernel boot messages on the serial console display the console prompt on serial console Jira reference number: None How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Test A: Boot uefi-x86 board imag…

Description remove kinetic, lunar, mantic fix armhf sid, noble, oracular How Has This Been Tested? [x] Manual tests on affected Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Fixes https://github.com/armbian/build/pull/6819, see https://github.com/armbian/build/pull/6819#discussion_r1681548553 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings View the full article

Armbian Development Report: Continued Progress and Community Momentum Over the past two weeks, the Armbian project has made steady and meaningful progress across core infrastructure, board support, and kernel development. From bootloader improvements to expanded hardware compatibility, our contributors continue to push the platform forward. This update highlights recent technical advancements, bug fixes, and community contributions that help power the Armbian ecosystem. Highlights Pcduino2/3 Gain HDMI and Display FixesHDMI output is now supported, and a regression affecting display output on Pcduino2 and Pcduino3 boards has been resolved.#8341 Key Bootloader an…

MediaTek has introduced the Genio platform for AIoT devices, and unveiled the first chip of the Genio family with the Genio 1200 Octa-core Cortex-A78/A55 processor with a 4.8 TOPS NPU, 4K video support, and designed for premium AIoT products. The chip is manufactured with a 6nm processor, is said to consume less than 8W, supports dual 4Kp60 video output and up to 48MP @ 30 fps video capture, and WiFi 6, Bluetooth 5.2 and 5G connectivity can be added through add-in chips. Targets applications include Smart Home appliances, HMI, industrial IoT, robotics, and more. MediaTek Genio 1200 key features and specifications: CPU – Octa-core processor with four Cortex-A78 cores @ up…

We’ve already seen several Rockchip RK3588 modules with Firefly Core-3588J, Turing RK1, and Banana Pi RK3588_CV1, all with an edge connector to insertion into the carrier board. Rongpin RD-RK3588 system-on-module is a little different with four board-to-board connectors that enable a slightly more compact design, and should expose more I/Os than say a 314-pin MXM edge connector. The module ships with up to 16GB of RAM, 128 GB of storage, a Rockchip RK806-1 PMIC, and the company also offers a development kit with RD-RK3588-B baseboard fitted with the module for evaluation and early software development. RD-RK3588 board-to-board module RD-RK3588-C core module specifications…

Description All changes are for Onecloud: Fix bug: the USB closed to the HDMI doesn't work Fix bug: cpufreq doesn't work Fix bug: thermal_zone doesn't work Add bootscript Add missing dependency - libmpc-dev (needed for gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf) How Has This Been Tested? [X] Build [X] Burn and test Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downs…

Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux. View the full article

Latest Weston features View the full article

PINE64 is about to launch the second generation Pinecil RISC-V soldering iron with the Pinecil V2 featuring a new Bouffalo Lab BL706 RISC-V microcontroller with Bluetooth LE connectivity, optimizations for higher power levels, as well as tentative support for the new USB PD EPR standard (Extended Power Range) working at up to 28V. I don’t solder every day, but when I do, I use my Pinecil soldering iron, as it’s heating super fast and does the job, and in my case, works quite better than the TS100 soldering iron. So it should come as no surprise that the Pincel is the most popular consumer hardware from the PINE64 community (after SOPine modules), and the new Pinecil V2 is…

The Allwinner A40i and A60i industrial-grade quad-core and hexa-core Cortex-A7 processors were first introduced in 2018 with support for the wide -40°C to +85°C industrial temperature range, but so far I had not noticed any hardware making use of either processor. But Banana Pi is now offering the Banana Pi BPI-M2 Ultra SBC, which they launched in 2016 with the Allwinner R40 quad-core Cortex-A7 SoC, with the pin-to-pin and software-compatible Allwinner A40i industrial-grade processor. Banana Pi BPI-M2 Ultra specifications: SoC – Allwinner A40i quad-core Arm Cortex-A7 processor with Arm Mali-400MP2 GPU @ 500 MHz, 1080p60 H.264, MPEG-4, MPEG-1/2 video decoder, H.264 1080p45…

Description As stated in the tittle. View the full article

Description Next Ubuntu (not LTS) Jira reference number AR-1380 How Has This Been Tested? [x] Build CLI and minimal images [x] Build desktop (our repository needs to be updated due to missing package) Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Jira reference number AR-1575 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description This PR includes the following changes I noticed that we were making use of r_i2c to communicate with AXP chip for Orange Pi lite2 and one plus in linux kernel, but were using r_rsb in u-boot. Made this consistent by porting the patch used in sunxi kernel to u-boot. Moved to board specific crust config for Orange Pi 3, lite2 and one plus. The difference from previous configuration is that crust will now be aware of presence of AXP power chip present on the board and hence should be able to lower the power usage further during sleep or shutdown state Enabled kernel module for Hantro G2 video codec block available on H6 boards. Should allow faster video decodi…

Ongoing work on the reverse-engineered Panfrost OpenGL ES driver for Arm Mali GPUs has turned the RK3399 SoC into a very attractive platform to try out Wayland on ARM devices. View the full article

Check out the new GNOME Programming Guidelines and file bugs in Bugzilla. View the full article

Description Current boot loader is broken anyway. At least for my device. Jira reference number AR-1157 How Has This Been Tested? [x] Build, many reboots, install to emmc Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description This fixes the recently broken patch. See #4261 and https://forum.armbian.com/topic/23824-fancontrol-service-fails-to-start-with-kernel-version-51572/ Needs to be tested on actual hardware! How Has This Been Tested? build runs ok. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

No descriptionView the full article

Description Maintenance. View the full article

ROCK Robotic has announced the ROCK Base triple-band multi-constellation RTK/GNSS base station that works with the Web3 GEODNET decentralized GNSS reference network, with the solution designed to offer centimeter accuracy to support applications such as civil surveying, high-definition mapping, digital twin creation, and robotic solutions. Real-time Kinematic (RTK) is a relative positioning technique relying on GNSS (GPS, Galileo, GLONASS, Beidou …) and allowing centimeter positioning accuracy. The technique requires an RTK “Base station” like the ROCK Base and a lower-cost “Rover station” typically attached to a vehicle or drone. For higher accuracy, it’s also possible …

Texas Instruments (TI) has introduced the ULC1001 digital signal processor (DSP) ultrasonic lens cleaning (ULC) technology designed – when combined with DRV2901 piezo transducer driver – for self-cleaning camera systems to quickly detect and remove dirt, ice, and water using microscopic vibrations. Cameras used in the automotive, industrial, robotics, and smart farming industries may require cleaning from time to time and that usually means manual cleaning leading to potential downtime, higher maintenance cost, and so on. It could also be done through mechanical parts but that adds further complexity to the system, so instead, Texas Instruments ULC1001 and DRV2901 combo e…

EDATEC CM4 Industrial is both a Raspberry Pi CM4 carrier board and a computer for industrial IoT, control, and automation that expands on the company’s CM4 Sensing and CM4 Nano solutions with more features and interfaces. The system notably offers two RS485, one RS232, three analog inputs, two digital inputs, and one relay output through terminal blocks, as well as optional WiFi, Bluetooth, and 4G LTE + GPS connectivity, and a wide DC voltage range of 8V to 36V. EDATEC CM4 Industrial specifications: SoM – Raspberry Pi CM4 module with SoC – Broadcom BCM2711 quad-core Arm Cortex-A72 processor @ 1.5GHz with VideoCore Vi GPU supporting OpenGLES 3.1, Vulkan 1.x, H.265 (HEVC) (…

Manufactured with a 4nm processor, the MediaTek Dimensity 7200 is an octa-core Armv9 processor designed for mainstream smartphones. with two Cortex-A715 cores, six Cortex-A510 cores, a Mali-G610 MC4 GPU, as well as 5G, WiFi 6E, and Bluetooth 5.3 connectivity. So far, I had only seen Armv9 SoCs with a mix of Cortex-A510 “LITTLE” cores, Cortex-A710/A715 “big” core, and Cortex-X2 or Cortex-X3 “flagship cores” as found in the Dimensity 9200 processor, but the Dimensity 7200 is one of the first Armv9 processors – one other being the Snapdragon 7 Gen 1 – without a Cortex-X core in order to provide a more affordable solution. MediaTek Dimensity 7200 specifications: CPU 2x Arm C…

Description Update Rpi4 kernels, configs and adjust broken patches Jira reference number AR-1574 How Has This Been Tested? [x] Build test Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Maint. How Has This Been Tested? [x] Build test Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject, fixes the esp8089 driver to allow module remove without errors and leave the hardware in cold state to allow further module insertion. Not a great deal, can even wait after release, but only deal with CSC boards so should not be too worrisome. How Has This Been Tested? [x] Module has been tested [x] Current kernel debian packages compile [x] Edge kernel debian packages compile Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes gene…

Description Enable BINFMT_MISC for box86. Enable UHID for bluetooth LE keyboard I have a bluetooth LE keyboard with pairing issue: unexpected SMP command 0x06 unexpected SMP command 0x07 The root cause might be a race condition, but the kernel patch which just pass two SMP code check just works. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] xiaomi-elish kernel build success [x] My bluetooth keyboard is paired and work fine. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have co…

Description @lujianhua has just pushed two commits enabling 120Hz panel: https://gitlab.com/sm8250-mainline/linux/-/tree/sm8250/v6.7?ref_type=heads This pr also rebased the xiaomi keyboard related patches to his branch, although keyboard is still not working. Enable CONFIG_HIDRAW because I find it is necessary for yuzu emulator to detect nintendo switch pro controller. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=xiaomi-elish BRANCH=sm8250 DEB_COMPRESS=xz [x] Xiaomi elish boots with 120Hz. Checklist: [x] My code follows the styl…

Description move original OrangepiZero patch to be applied on that board only add patch for powering WiFi on Inovato Quadra with correct pin How Has This Been Tested? [x] Build test Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Armbian Development Highlights: June 2–9, 2025 This week’s Armbian updates focused on kernel improvements, bootloader modernization, and several core enhancements to the build infrastructure. Key work spanned platforms like Rockchip, Sunxi, and Odroid, emphasizing kernel stability and broader compatibility across boards. Kernel Upgrades Several boards received kernel updates: Rockchip 32-bit edge kernel bumped to 6.15 in PR #8262 by paolosabatino. SpacemiT platforms updated to 6.6.93 in PR #8274 by pyavitz. Odroid XU4 kernel upgraded to 6.6.93 via PR #8277 by belegdol. Patches also landed to adapt Wi-Fi drivers to 6.15-era changes, including fixes for xradio and uwe56…

Imagination IMG RTXM-2200 32-bit RISC-V real-time CPU core is the first member of the company’s Catapult family comprised of four distinct RISC-V families for dynamic microcontrollers, real-time embedded CPUs, high-performance application CPUs, and functionally safe automotive CPUs. The company says it’s a highly scalable real-time, deterministic, 32-bit embedded CPU, that is feature-rich and flexible in design for mainstream devices, but, excuse the pun, leaves most of the details to your imagination… The new core will mostly be used as a helper core (aka co-processor) in more complex SoCs for 5G modems, cellular base stations, networking solutions for data transfer, pac…

As part of its unwavering commitment to open source and open standards, Collabora is proud to be part of bringing the recently-released OpenXR 1.0 to life, and to be pioneering the Monado open source runtime for OpenXR. View the full article

A brief discussion about Crosswalk’s JS, JAVA and Native Extensions performance View the full article

Beelink’s newly launched U59 Pro addresses the weak graphical performance offered by the original Beelink U59, which we also noticed in the Beelink MINI S, and was a direct result of the iGPU limitations. By simply upgrading the CPU from a ‘desktop’ to ‘mobile’ Celeron processor the iGPU received a fifty percent boost in execution units. Beelink kindly sent one for review and I’ve looked at performance running both Windows and Ubuntu. Beelink U59 Pro Hardware Overview The Beelink U59 Pro physically consists of a 124 x 113 x 42mm (4.88 x 4.45 x 1.65 inches) square plastic case. As before it is an actively cooled mini PC but now uses Intel’s 10 nm Jasper Lake N5105 processo…

Description /boot/efi/EFI/BOOT/grub.cfg is used to location /boot/grub/grub.cfg. But it seem like that we don't need to generate it manually. Here I use amd64 for example. arm64 should be same. If we use grub-efi-amd64-bin, grub-install will embed prefix in core.img which will be copied to /boot/efi/EFI/BOOT/BOOTX64.efi. We can confirm in output/debug/install.log grub-install: info: grub-mkimage --directory '/usr/lib/grub/i386-pc' --prefix '(,gpt1)/boot/grub' --output '/boot/grub/i386-pc/core.img' --dtb '' --format 'i386-pc' --compression 'auto' 'ext2' 'part_gpt' 'biosdisk' ... grub-install: info: copying `/boot/grub/x86_64-efi/core.efi' -> `/boot/efi/EFI/BOOT/BO…

flash-kernel: pass FK_FORCE=yes to flash-kernel so it actually runs in chroot; thanks Ubuntu View the full article

Alif Semiconductor’s Ensemble is a family of processors and microcontrollers based on Arm Cortex-A32 and/or Cortex-M55 cores, one or two Ethos-U55 AI accelerators, and plenty of I/Os and peripherals. Four versions are available as follows: Alif E1 single-core MCU with one Cortex-M55 core @ 160 MHz, one Ethos U55 microNPU with 128 MAC/c Alif E3 dual-core MCU with one Cortex-M55 core @ 400 MHz, one Cortex-M55 core @ 160 MHz, one Ethos U55 with 256 MAC/c, one Ethos U55 with 128MAC/c Alif E5 triple-core fusion processor with one Cortex-A32 cores @ 800 MHz, one Cortex-M55 core @ 400 MHz, one Cortex-M55 core @ 160 MHz, one Ethos U55 with 256 MAC/c, one Ethos U55 with 128MAC/c A…

Description Changing support status - merge when the time is right. Jira reference number AR-1651 How Has This Been Tested? No need, status change. View the full article

Lumination Labs’ Sonatino is an ESP32-S3 board designed for audio applications that follows the Raspberry Pi Zero dimensions so that it can be used with some of the cases designed for the Raspberry Pi Zero. The wireless audio board features Cirrus Logic WM8524 audio DAC and WM8782 audio DAC capable of 24-bit 192kHz stereo output and mono input respectively, a speaker amplifier and two pins for speaker connection, a 3.5mm audio jack, as well as a microSD card slot for the storage of audio or other data. Sonatino specifications: Wireless Module – ESP32-S3-WROOM-1 with SoC – ESP32-S3 dual-core LX7 microprocessor @ up to 240 MHz with Vector extension for machine learning Me…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] test with command ./compile.sh build GITHUB_MIRROR=ghproxy REGIONAL_MIRROR=china BOARD=licheepi-4a BRANCH=legacy BUILD_DESKTOP=no BUILD_MINIMAL=yes KERNEL_CONFIGURE=yes RELEASE=jammy SKIP_EXTERNAL_TOOLCHAINS=no,can download releate package success as: [🐸] wget --no-verbose --progress=dot:giga -O…

Description Boots cleanly from sdcard even when OEM uboot is installed on EMMC (was having optee errors using radxa uboot when OEM was on EMMC) -Boot 2024.04-armbian (May 13 2024 - 20:34:52 +0000) Model: FriendlyElec NanoPC-T6 DRAM: 16 GiB Core: 338 devices, 30 uclasses, devicetree: separate MMC: mmc@fe2c0000: 1, mmc@fe2e0000: 0 Loading Environment from nowhere... OK In: serial@feb50000 Out: serial@feb50000 Err: serial@feb50000 Model: FriendlyElec NanoPC-T6 rockchip_dnl_key_pressed: no saradc device found Net: No ethernet found. Hit any key to stop autoboot: 0 Scanning for bootflows in all bootdevs View the full article

Description Radxa E52C is a rk3582 based board with dual 2.5G ethernet. This pr depends on https://github.com/armbian/linux-rockchip/pull/203. Since its soc is rk3582 so it should the same uboot patch from rock-5c to enable good ip cores disabled by u-boot. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh BOARD=radxa-e52c BRANCH=vendor BUILD_MINIMAL=no DEB_COMPRESS=xz KERNEL_CONFIGURE=no RELEASE=noble KERNEL_GIT=shallow BUILD_DESKTOP=no [x] Board boots fine. Checklist: Please delete options that are not relevant. [x] My code follows the style g…

Description Before, the string would look like this and fails since it's not a valid JSON: {%0A "after": "f6ddb25e6d6affbfdd92b4cd33a9b874254b4a09",%0A "base_ref": null,%0A "before": "0000000000000000000000000000000000000000",%0A "commits": [%0A {%0A "author": ... After, the JSON gets correctly parsed: { "after": "090850f02e35af562dd5adc39c23d423be6bfe15", "base_ref": null, "before": "0000000000000000000000000000000000000000", "commits": [ { "author": { ... Escaping multiline strings is not needed anymore with GITHUB_OUTPUT. See https://github.com/orgs/community/discussions/26288#discussioncomment-3876281 Instead, use the toJS…

This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level. View the full article

Debian Jessie running on Raspberry Pi 2 View the full article

There are now not one but two alternatives to the discontinued ODROID-H2+ SBC with the ODROID-H3 and ODROID-H3+ single board computers powered respectively by an Intel Celeron N5105 and Pentium N6005 Jasper Lake processor. Both new SBCs support up to 64GB RAM, significantly faster Intel UHD graphics, an M.1 PCIe Gen 3 socket, and keep the same port assignment with two 2.5GbE ports, two SATA ports, as well as two USB 3.0 and two US 2.0 ports. ODROID-H3/H3+ specifications: SoC ODROID-H3 – Intel Celeron N5105 quad-core Jasper Lake processor @ 2.0GHz / 2.9GHz (Turbo) with 24EU Intel UHD graphics @ 450 / 800 MHz (Turbo); 10W TDP ODROID-H3+ – Intel Pentium N6005 quad-core Jaspe…

Description My rock5b always encountered system hang with the old rkbin files when ddr freq is 2112MHz. After updating these binaries there is no system hangs. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] u-boot build successfully [x] no system hangs after updating u-boot Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings…

Description As per subject, bumps rk322x family to kernel 6.0 How Has This Been Tested? [x] Compiled deb kernel packages and tested on a live system Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Fix all shellcheck issues, as well as some formatting/indentation. Tested by building and booting a Radxa Zero image with this included. View the full article

InuoMicro G4305L8-S2 is a relatively inexpensive fanless industrial PC box powered by an Intel Celeron 4305U Whiskey Lake processor that offers eight 2.5GbE ports making the system suitable for firewall and other networking applications. The barebone computer supports up to 32GB RAM, one mSATA SSD, one 2.5-inch SATA drive, and also provides interfaces such as HDMI and DisplayPort video outputs and a few USB ports allowing the user as a standard computer. Wireless connectivity can be implemented through mini PCIe and/or M.2 4G LTE and WiFi modules. InuoMicro G4305L8-S2 specifications: SoC – Intel Celeron 4305UE dual-core Whiskey Lake processor @ 2.0 GHz (base, no turbo fre…

Purism has just announced the Lapdock kit to turn their Librem 5 Linux smartphone into a laptop with a 13.3-inch touchscreen display thanks to the NexDock 360 laptop dock. I was a big believer in mobile desktop convergence around 10 years ago, expected to be soon able to use my phone as a computer or laptop with a dock, and it looked like it might have become a reality when Canonical launched the Ubuntu Edge smartphone crowdfunding campaign in 2013. But it turns out demand was not sufficient, and Canonical eventually ended their convergence efforts focusing on profitable IoT and cloud segments instead. But that does not mean there isn’t a niche market and Purism’s Lapdock…

Description Switch mvebu current to 6.1.y Jira reference number AR-1577 How Has This Been Tested? [x] Build test Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description As per title. How Has This Been Tested? [ ] Build test at CI Checklist: [ ] My changes generate no new warnings View the full article