SBC News

meson64: edge: rework to kernel 5.19 JIRA AR-1231 [x] based on the work done by @adeepn on #3898 -- thanks! [x] took the opportunity to finally remove CONFIG_ARCH_ROCKCHIP=y from meson64 .config [x] bumped to 5.19-rc3 without issue [x] backported a bunch of fixes I had done on 5.10 back in #3154 - namely: [x] remove meson_drv_shutdown revert patch, instead CONFIG_DRM_MESON=y and its dependencies in .config (this allows proper shutdown on non-ODROID, while keeping ODROID rebooting nicely -- reference https://lore.kernel.org/linux-arm-kernel/7h4kfjpe07.fsf@baylibre.com/T/ ) [x] N2(+): do NOT enable SD UHS mode, which cause next-reboot u-boot to not be able to use SD (vo…

Description meson8b: Use thirdpart kernel xdarklight/linux to support HDMI How Has This Been Tested? [ ] Odroid-C1 [X] Build [ ] Boot and Test (Because I don't have) [X] OneCloud [X] Build [X] Boot and Test Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Fix #3850 second try. The first was ubuntu-only. Hope this will work for debian and ubuntu both. additional tests needed. View the full article

Description Change the board description for Helios64 to do a blobless u-boot. Jira reference number [AR-9999] How Has This Been Tested? [x] Boots on Helios64 good image with newly flashed idbloader and u-boot.itb Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

No descriptionView the full article

To reduce the total number of cores used. Porting the media core to versions 5.17 and 5.18, with simultaneous removal of the station-p2 kernel. View the full article

Description If 1st job is not run, no other will. We need to move IF to the step. Jira reference number AR-1244 How Has This Been Tested? [x] Manual run Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description All changes are for Onecloud: Fix bug: the USB closed to the HDMI doesn't work Fix bug: cpufreq doesn't work Fix bug: thermal_zone doesn't work Add bootscript Add missing dependency - libmpc-dev (needed for gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf) How Has This Been Tested? [X] Build [X] Burn and test Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downs…

Description Spreadtrum (sprd) bluetooth chip declares a feature (park link status) which does not work so the device fails the initialization. This PR adds a workaround and a quirk to avoid using such feature, letting the device being correctly initialized, moreover it should not interfere with other bluetooth chips as the orangepi original patch does. Also sdcard bus pins receive an increased current strength to improve sdcard compatibility How Has This Been Tested? [ ] Current (v5.15) kernel deb packages built and installed on existing system [ ] Edge (v5.18) kernel deb packages built and installed on existing system Checklist: [x] My code follows the style guideli…

Description set correct boot script for modern kernels add current build target add current build option Jira reference number AR-1200 How Has This Been Tested? [x] Generated and booted Focal CLI image Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Rebase action fails to work after bulk security changes. View the full article

Description Ditch bash spaghetti code to advance in Github actions. Jira reference number AR-1230 How Has This Been Tested? [ ] Hundred times Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

The current patch is a direct copy of the OEM setup. It includes Nanopi dts files that belong to other boards. Remove unnecessary Nanopi device tree includes and files. Incorporate the appropriate nodes into orangepi-r1plus-lts tree. Remove the Nanopi dts files from the patch. Jira reference number AR-1243 Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. Tested on orangepi-r1-lts board. Iperf tests on both ports (ETH1 and LAN1) produced expected results in bidirectional tests. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my o…

Description Few leftovers that prevent full recompilation Jira reference number AR-1222 View the full article

Description chroot installation is populating machine-id, which makes systemd skip firstboot scripts View the full article

Description Related #3682 . Debian sid also updates mesa-utils. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] sid gnome build success Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description The version argument is not used by the script anymore, hence the check is obsolete. Additionally make use of the currently unused defined MOD_DIR variable. Jira reference number [AR-9999] How Has This Been Tested? Running the script locally, the change otherwise is trivial. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full artic…

Description Restore Rock64 and RockPi 4A/4B/4C builds. How Has This Been Tested? It hasn't yet. Need to get these changes integrated to the build system so I can test the images on the SBCs :) Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject, expecially useful for people that is using docker note: this PR can be squash-merged since there are three commits that all around do the job, no need to keep all three of them in history. How Has This Been Tested? Kernel debs have been produced; people on the forum thread did some testing and they seem happy enough. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merge…

Description Minor fix for MGLRU armhf patch on kernel v5.17 and v5.18 How Has This Been Tested? [x] Kernel compilation completes Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description These patches exist on rockchip-5.18, but not on rockchip64-5.18. Patches that are part of LibreELEC patchset are dropped. Rest of the patches adjusted to apply cleanly. The only patch that gave me trouble was rk356x-vop2-support.patch due to multiple concurrent changes to dw_hdmi-rockchip.c. The patch now applies and compiles, and works on RockPi4-b, but I don't have a RK35xx device to test with, so any tests with such hardware is appreciated! How Has This Been Tested? [x] Compiled with mainline v5.18.3. Patches apply cleanly. [x] Booted on RockPi4-b. [x] Tested HDMI/rkvdec on RockPi4-b with FFMpeg-v4l2-request patchset and manually built Kodi and Moonligh…

Description Enable iwlwifi for Rock 3A (needed for AX200/AX210) See this post: Is AX200/210 supported? Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream m…

Description This PR adds some configuration bits for a new CSC configuration for generic rk3318 tv boxes. rk3318 is the cheap and lost sibling of rk3328, no documentation is available and my opinion is a scrap product; nonetheless it has the same features and has been apparently sold only to tv box manufacturers. The provided device tree is generic enough to work with rk3328 tv boxes too. A set of patches that introduce several device tree overlays is provided, so users can enable the overlays at runtime as needed manually or with the help of a simple script (rk3318-config) that does some autodection. What is the purpose of this? The purpose of this CSC is to give to r…

Description Bump rockchip64 edge kernel config to v5.18 disabled csgpio patch on v5.15 due to clashing with mainline added register values in tinkerboard 2 patch to avoid warnings How Has This Been Tested? Untested, just upgraded the kernel config and checked with git diff that no extra options were removed Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules …

Description Sorry for uplifting the discussion again around the PWM patch for rockchip64 again, but I did some further tests and I'm not convinced. The patch rk3568-pwm-rockchip.patch looks like a copy-paste patch from rockchip v5.10 kernel and I can't find it on patchwork.kernel.org patches, so I guess it is not suitable for mainline. There is some weird behaviour I'm experiencing. My test board is the rk3318 tvbox, but this is not a cons; instead this is a pro and I'm going to explain why: these tvboxes lacks proper voltage regulator chips (like rk805 or rk808) and instead heavily relies on PWM to do power regulation for CPU and Logic planes. When PWM goes nuts, the bo…

Description After some inspections related to pwm patch recently introduced and reverted on v5.18 kernel patchset (see https://github.com/armbian/build/pull/3928), it turned out that some boards (OrangePI 4/LTS, Tinkerboard 2) use a pinctrl configuration name active which is inherited from legacy kernel. Mainline kernel does not use such pinctrl configuration name, but wants default. This effect of this misnaming is an increased voltage supplied to "vdd_log" regulator and an increased power consumption since the configuration active is just ignored on mainline kernel. Power consumption has been tested using a regular multimeter, on my OrangePI 4 LTS board, and with the …

Description I have these minor patches pending on a repository of mine for rockchip64, I would like to merge them to, later with another PR, commit a CSC configuration for rk3318 tvbox. Anyway these patches are generic and can be more or less useful: make timer and GPIO led triggers built-in like others enable brcmfmac for rockchip64 legacy kernel DDR_BLOB variable can be now specified in board configuration per-board otherwise the default is used. I noticed this was already in use for rockpi-4a and 4b board configs, but probably went missing when BOOT_SCENARIOs were introduced? Document the BOOT_SCENARIO options, with little in-line bash comments Add tpl-blob-atf-main…

Description A recent rk356x patch changed part of pwm-rockchip.c file; in particular it adds a mandatory "active" pinctrl state, which is not expected for existing PWM users for all rockchip64 family chips (notably px30, rk3328 and rk3399) where PWM is in use and "active" pinctrl name is not provided. In case PWM is used as modulator for some voltage regulation, may break opp and devfreq framework (in my particular case, a tv box, made cpu unable to do frequency scaling and prevented lima driver to be correctly setup). This patch makes the "active" pinctrl state optional on v5.18 edge kernel for rockchip64. How Has This Been Tested? [x] Built kernel deb packages succe…

Description GPU governor for rk3399 (Mali T860, Panfrost driver) was set to “performance” 4 years ago due to issues with simple_ondemand; nowadays simple_ondemand works just fine. This fix makes my board (Orange PI 4 LTS) consume ~25mA (125mW) less current and obviously makes soc fresher. Jira reference number AR-1246 How Has This Been Tested? [x] Tested setting simple_ondemand manually on official Ubuntu Jammy XFCE image [x] Built Ubuntu Jammy XFCE image from scratch Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have m…

Description After they are breaking for (probably) whole Allwinner. For making a release this is anyway a proper direction. Will check later where exactly is breaking. Jira reference number AR-1192 How Has This Been Tested? [x] Build Nanopi Neo2 u-boot [x] Build Orangepi PC2 u-boot Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…

Description fix: Fix duplicate nodes for sun50i-h5-orangepi-pc2 board The patch must be registered in the series.conf file Checklist: [x] Test on board View the full article

Description Add new megouse patches, adaptation to the new version. Checklist: [ ] Test build sunxi [ ] Test build sunxi64 View the full article

Description Preparing for sunxi EDGE migration to version 5.18 Checklist: [x] Test build ./compile.sh KERNEL_VERSION_LEVEL=5.18 KERNELSWITCHOBJ=v5.18 View the full article

Description sunxi-5.15: adapting patches for the version 5.15.43 Checklist: [ ] Test build sunxi [ ] Test build sunxi64 View the full article

Description cpu opp table for sun8i-a83t can only be a multiple of the integer 24 * 8 * n Checklist: [ ] Test build [ ] Test work on board View the full article

Description Updating to the status of the orange-pi-5.17-20220510-1956 tag Checklist: [ ] Test build sunxi [ ] Test build sunxi64 View the full article

Description sunxi-5.17: update and switch to version 5.17.11 Checklist: [ ] Test build sunxi [ ] Test build sunxi64 [ ] Test work on the board View the full article

Description Added and rework armbian patches. Checklist: [x] Test build sunxi [x] Test work on board bananapi-m3 [ ] Test build sunxi64 [ ] Test work on board orangepi-pc2 View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [NaN] How Has This Been Tested? Built/Tested both H3 and H5 images Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Support Xunlei Onecloud Xunlei Onecloud used to be popular in China due to it's cheapness(Only 50 yuan, about 8 dollar). Due to the lack of drivers, the vpu(Video Processing Unit) and hdmi are not working. Fortunately I found a thirdpart kernel xdarklight/linux support them. I will open another PR for it due to it affect not only this but also another meson8b deviecs - Odroid C1. Also I didn't add u-boot parameter. Beacuse: I didn't find a suitable u-boot source It isn't a development board, it could only boot from emmc's u-boot How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details…

Description Also update bcm2711 config. Small maintenance issue. How Has This Been Tested? [x] build test on all affected Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Switch rockchip64 family to u-boot v2022.04 This PR supersedes u-boot upgrade part from #3719 Jira reference number AR-1228 How Has This Been Tested? Testing with rk3399 boards [ ] Khadas Edge-V [ ] NanoPi M4V2 [ ] RockPi 4 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description switching sunxi to 5.18.y temporally disabling several OOT wireless drivers re-enable AUFS on 5.18.y Jira reference number AR-955 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downs…

Description Allow building firmware for doubleshot again View the full article

Description Adding thermal / temperature monitoring support for NVIDIA Jetson Nano. This activates the compatible tegra_soctherm kernel module for the tegra210 soctherm device. Temperatures included: Path Description /sys/devices/virtual/thermal/thermal_zone0/temp cpu /sys/devices/virtual/thermal/thermal_zone1/temp mem /sys/devices/virtual/thermal/thermal_zone2/temp gpu /sys/devices/virtual/thermal/thermal_zone3/temp pllx Kernel Module source: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/thermal/tegra/tegra210-soctherm.c How Has This Been Tested? Tested on a NVIDIA Jetson Nano aArmbian 22.05.0-trunk Bullseye with Linu…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…

Description Update ATF from 2.5 to 2.6, and keep the bl31.elf name How Has This Been Tested? Booted this version ATF on Helios64, a rk3399 board. I have no other hardware to test other blobless configurations. [ ] Helios64 boot Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules U-Boot TPL 2021.07-armbian (May 24 2022 - 19:11:58) ... Trying to boot from BO…

Description Update meson64-edge kernel to 5.19 Jira reference number AR-1231 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Build ok Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Update meson64-edge/general-meson-aiu-Fix-HDMI-codec-control-selection.patch patch for Kernel 5.15.7+ Updated for work with this patch: commit 1d29b712efb6ec044547a01cd2cfb69af47a21a9 Author: Mark Brown <broonie@kernel.org> Date: Thu Apr 21 13:38:02 2022 +0100 diff --git a/sound/soc/meson/aiu-codec-ctrl.c b/sound/soc/meson/aiu-codec-ctrl.c index c3ea733fce91..c966fc60dc73 100644 --- a/sound/soc/meson/aiu-codec-ctrl.c +++ b/sound/soc/meson/aiu-codec-ctrl.c @@ -57,7 +57,7 @@ static int aiu_codec_ctrl_mux_put_enum(struct snd_kcontrol *kcontrol, snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL); - return 0; + return 1; }…

Description Don't add any packages to CSC repositories (stretch, bionic, ...), but generate index. Jira reference number AR-1177 How Has This Been Tested? [ o.k. ] Using config file [ /home/igorp/Devel/build/userpatches/config-example.conf ] [ o.k. ] Command line: setting REPOSITORY_UPDATE to [ update ] [ o.k. ] Using user configuration override [ userpatches/lib.config ] [ warn ] Skipping adding packages (not supported) [ stretch ] [ warn ] Skipping adding packages (not supported) [ bionic ] [ o.k. ] Checking and adding to repository buster [ main ] [ o.k. ] Creating section [ main ] [ o.k. ] Checking and adding to repository bullseye [ main ] [ o.k. ] Adding bullseye …

Updating patch to hide u-boot (latest version) on-screen tty on Allwinner Sunxi platform. View the full article

Description Update kernel of rockchip64-edge to 5.18. Some wifi module failed to compile so I disable them (CONFIG_RTL8822CS, CONFIG_RTL8821CU, CONFIG_88XXAU) Remove u-boot patch for rk35xx 0001-Lower-the-priority-of-EFI-to-be-after-DOS-partition.patch because I can't reproduce issue #3271 @catalinii described. Regenerate patches of rk356x (for rock-3a) based on mainline (linux-next). Copy all the other board patches from rockchip64-5.17 and modified some patches to make them successfully applied to kernel 5.18. Here are the details: 1, add-rockchip-iep-driver.patch modified since source tree change 2, general-emmc-hs400es-init-tweak.patch deleted since merged in 5.18 …

Description Update sunxi-5.17 for linux version v5.17.5 Checklist: [x] Test build [x] Test work on the boards View the full article

added imaged for desktop bullseye on 3 boards View the full article

Description As the issue @catalinii mentioned in #3271, when a sdcard has got flashed with radxa rock3a image or manjaro-arm rock3a image before, armbian can't boot on this sd card after flashed with ether. Here is the root cause: https://forum.armbian.com/topic/12352-orange-pi-4/page/3/#comment-94322. We can avoid this issue by using the same gpt partition type as radxa and manjaro, and use the same fat /boot partition to aviod the bad support for ext4 filesystem from rockchip legacy u-boot. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Prepare a sd card,…

WaveShare Touchscreen Driver Fix (Odroid) Description A number of other WaveShare screens also use ID: 0eef:0005 and therefore the patch used to enforce the VU7 driver breaks these other screens. This was the purpose of the "disable_vu7" env boot param which correctly defaults to true. However, this is ignored in boot.cmd + the patches for the kernel reverse the changes made by Hardkernel to fix this problem. I have corrected the problem by removing 0eef:0005 from the driver enforced ignore_list and changed boot.cmd to allow the "disable_vu7" to function correctly (adding usbhid quirk when set to false). How Has This Been Tested? Please describe the tests that you ran …

Description In first run script we show image support status but only in case image is not supported (nightly, self build, edge). We rely on information that is stored in /etc/armbian-distribution-status which is a part of BSP package. Jira reference number AR-1197 How Has This Been Tested? [ ] Generated image Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modu…

Description This PR adds support for kernel 5.15 and 5.17 for Orange Pi 4 LTS board. Work is mostly based upon existing Orange Pi 4 device tree and code. The LTS board differs from the ancestor because uses Spreadtrum/Unisoc uwe5622 wifi/bluetooth chip and es8316c sound codec. uwe5622 wifi patches have been brought in from allwinner family patches and enabled via kernel config modifications. Some other minor fixes have been brought in to avoid kernel warnings or trivial errors. Wifi part is working, bluetooth part is not yet ready because the kernel driver crashes and thus has been disabled. The Unisoc driver is suboptimal since it is not very compliant against kernel gu…

Method from uboot Odroid C2 fix, same problem same workaround. Description On linux 5.15 the new ethernet chip can not be resetted properly. The workaround from uboot Odroid C2 is tested able to fix this. The commit updates the existing patch. https://forum.armbian.com/topic/19846-orange-pi3-lts/page/10/#comment-141243 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [√ ] Test ethernet with modified dtb Checklist: [ ] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particular…

Description We didn't spot this problem since CI was not operational due to label changes. View the full article