Skip to content
View in the app

A better way to browse. Learn more.

Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

g4715

Members
  • Joined

  • Last visited

Everything posted by g4715

  1. Hi Javelin, below are some of the tests I completed yesterday, but I could not capture the logs. It seems that this was working on the (very) old armbian version Armbian_24.8.1_Odroidhc4_bookworm_current_6.6.47.img · No changes - starts, soft reboot is not working – voltage issue · <0x44 0x06 0x03> - starts, soft reboot is not working – voltage issue · <0x44 0x06 0x06> - does not boot Armbian_23.8.1_Odroidhc4_bookworm_current_6.1.50_minimal.img · No changes - starts, soft reboot is not working – voltage issue · <0x43 0x06 0x03> - starts, soft reboot is not working – voltage issue · <0x43 0x06 0x06> - does not boot Note, that the first value differs (by default) comparing to the latest version. Armbian_23.02.2_Odroidhc4_bullseye_current_6.1.11_minimal.img · No changes - starts, soft reboot is not working - black screen · <0x42 0x06 0x03> - starts, soft reboot is not working - kernel panic · <0x42 0x06 0x06> - does not boot Note, that the first value differs (by default) comparing to the latest version. Armbian_22.08.7_Odroidhc4_bullseye_current_5.19.17_minimal.img · No changes – starts, soft reboot is not working - blank screen Armbian_21.02.4_Odroidhc4_buster_current_5.10.27.img · No changes – starts, reboots w/o issues
  2. I have the reboot issue with the newer SDHC or SDXC. Those are the cards that I have tested: All the recent tests I was doing were performed on the second card (Transcend Ultimate). I will try to complete the tests with the older Armbians, as per your previous post, I just need some quiet time
  3. Yes, I have downloaded Armbian from this page and then ran apt update & apt upgrade. Can you elaborate more on this: capture the boot sequence. Do you mean to film it/record it or to provide some logs?
  4. I can boot now, but the soft reboot is still not working due to similar reasons as earlier (apologies for the quality of this screenshot) :
  5. Hi Javelin, Thanks for the reply. I have updated meson-sm1-odroid-hc4.dts and now I am not able to boot at all (not just after the soft reset)
  6. Well, I have the opposite experience. I was happily running Odroid HC4 with Transcend Premium 400X 16GB class 10 HC-I SDHC card for a few years w/o worrying about the reboot issue until I decided to change the SD card, as the old one started slowing down. I have tried Sandisk Ultra XC 64GB A1, as well as Transcend 16GB SDHC Ultimate 600x, but they both have issues with soft reboot. I have also tried cloning Armbian from the old card to one of the new cards, but I was still facing issues with the new card. I have also tried doing a fresh install on the old card, and then I was not facing issues, so apparently this is related to SD card compatibility. I have connected a monitor to capture the logs after I hit reboot, and this is what I get: I hope someone will have a working solution for this, as all the advices I have found so far on this forum are not helping, and it seems that my HDD started having issues after the forceful shut-downs. 😕
  7. Unfortunately, I have no updates on this. I keep using my old Transcend 16GB SDHC 400x card, although it is painfully slow. I have bought Transcend 16GB SDHC Ultimate 600x SD card as a replacement, but it is also having issues the same issues with the reboot.
  8. I am rebuilding my armbian+OMV on Odroid HC4 and now I am facing the issue with the hot reboot as well. I am on Armbian v24.8.4 running Armbian Linux 6.6.47-current-meson64 using Sandisk Ultra 64GB A1 class 10 XC-I. Can you advise, what value I should use in meson-sm1-odroid-hc4.dts? gpio-regulator-tf_io { compatible = "regulator-gpio"; regulator-name = "TF_IO"; regulator-min-microvolt = <0x1b7740>; regulator-max-microvolt = <0x325aa0>; vin-supply = <0x0e>; enable-gpios = <0x44 0x0e 0x06>; enable-active-high; regulator-always-on; gpios = <0x44 0x06 0x02>; gpios-states = <0x00>; states = <0x325aa0 0x00 0x1b7740 0x01>; phandle = <0x29>; }; I am attaching the full file for the reference as well. By the way, I am not facing this issue with my older SD card Transcend Premium 400X 16GB class 10 HC-I (6.6.47-current-meson64). meson-sm1-odroid-hc4.dts

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.