Skip to content
View in the app

A better way to browse. Learn more.
Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

MK-918 (RK3188) Issues

oolonthegreat
in Rockchip CPU Boxes

Featured Replies

hiya folks! I have a no-brand (MK - 918?) RK3188  Android TV box that I'm trying to install Armbian, but I can't get it to boot Multiboot nor the Armbian image from the SD card. I have tried different SD cards and USB sticks, I am burning the Multitool image with balenaEtcher, but no luck, it boots straight to Android. I have also tried the solution posted by fabiobassa

but the program gets stuck on "Downloading bootloader...". here's some more info:
  

➜ lsusb
Bus 001 Device 009: ID 2207:310b Fuzhou Rockchip Electronics Company RK3188 in Mask ROM mode

➜ sudo ./rkdeveloptool ld
DevNo=1    Vid=0x2207,Pid=0x310b,LocationID=102    Loader

➜ sudo ./rkdeveloptool rd 3
Reset Device OK.

➜ sudo ./rkdeveloptool ld  
DevNo=1    Vid=0x2207,Pid=0x310b,LocationID=102    Maskrom

➜ sudo ./rkdeveloptool db MiniLoaderAll.bin
Downloading bootloader...

it gets stuck there no matter how long I wait.

 

also, I have soldered the UART debug connections and here is the output I get when it boots to its default Android:

Spoiler

DDR Version 1.04 20140217
In
DDR3
300MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=8 Size=2048MB
Memory OK
OUT
BUILD=====2
No.1 FLASH ID:2c 64 44 4b a9 0
OK! 214381
unsigned!
SecureBootEn = 0 0
Boot ver: 2014-03-03#2.13
start_linux=====219791
 729482 Starting kernel...@0x60408000

Uncompressing Linux... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.36+ (wasser19641@gmail.com) (gcc version 4.7 (GCC) ) #306 SMP PREEMPT Sun Oct 12 11:26:31 CEST 2014
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: RK30board
[    0.000000] ddr size = 2048 M, set ion_reserve_size size to 125829120
[    0.000000] memory reserve: Memory(base:0x98800000 size:120M) reserved for <ion>
[    0.000000] memory reserve: Memory(base:0x97000000 size:24M) reserved for <fb0 buf>
[    0.000000] memory reserve: Total reserved 144M
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] CPU SRAM: copied sram code from c0f19000 to fef00100 - fef020c0
[    0.000000] CPU SRAM: copied sram data from c0f1afc0 to fef020c0 - fef029e4
[    0.000000] sram_log:   @      0q   @       P    1      /  !    aB@ 2   `" 2q    : 4q
[    0.000000] CLKDATA_MSG: pll_flag = 0x03
[    0.000000] cpll auto set rate error
[    0.000000] L310 cache controller enabled
[    0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
[    0.000000] DDR DEBUG: version 1.00 20131106
[    0.000000] DDR DEBUG: DDR3 Device
[    0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Total Capability=2048MB
[    0.000000] DDR DEBUG: init success!!! freq=300MHz
[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[    0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
[    0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.000000] PERCPU: Embedded 7 pages/cpu @c315d000 s6976 r8192 d13504 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 483328
[    0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00150000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00006000@0x00004000(
kernel),0x00006000@0x0000a000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00002000@0x00080000(metadata),0x00002000@0x00082000(kpanic),0
x00272000@0x00084000(system),-@0x002F6000(userdata) bootver=2014-03-03#2.13 firmware_ver=4.4.2
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 880MB 1024MB = 1904MB total
[    0.000000] Memory: 1901376k/1901376k available, 195776k reserved, 1449984K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff600000 - 0xffe00000   (   8 MB)
[    0.000000]     vmalloc : 0xdf000000 - 0xfe800000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xde800000   ( 488 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .init : 0xc0408000 - 0xc062f000   (2204 kB)
[    0.000000]       .text : 0xc062f000 - 0xc0e840a4   (8533 kB)
[    0.000000]       .data : 0xc0e86000 - 0xc0f18b28   ( 587 kB)
[    0.000000]        .bss : 0xc0f1c024 - 0xc194e328   (10441 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:352
[    0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] rk_timer: version 1.3
[    0.003739] Calibrating delay loop (skipped) preset value.. 1583.48 BogoMIPS (lpj=7917420)
[    0.012874] pid_max: default: 32768 minimum: 301
[    0.018146] Security Framework initialized
[    0.022778] Mount-cache hash table entries: 512
[    0.028362] Initializing cgroup subsys debug
[    0.033124] Initializing cgroup subsys cpuacct
[    0.038099] Initializing cgroup subsys memory
[    0.042972] Initializing cgroup subsys freezer
[    0.047945] CPU: Testing write buffer coherency: ok
[    0.134208] CPU1: Booted secondary processor
[    0.174205] CPU2: Booted secondary processor
[    0.214201] CPU3: Booted secondary processor
[    0.214239] Brought up 4 CPUs
[    0.231840] SMP: Total of 4 processors activated (6333.93 BogoMIPS).
[    0.239190] devtmpfs: initialized
[    0.249141] NET: Registered protocol family 16
[    0.254488] DVFS MSG:        AVS Value(index=0): 128 128 128 128 128 128 127 127 127 128
[    0.273374] lcdc0 is used as external display device contoller!
[    0.279957] lcdc1 is used as primary display device controller!
[    0.386728] rk29sdk_wifi_bt_gpio_control_init: init finished
<hit enter to activate fiq debugger>
    0.394297] console [ttyFIQ0] enabled, bootconsole disabled
[    0.394297] console [ttyFIQ0] enabled, bootconsole disabled
[    0.403307] Registered FIQ tty driver de0adc00
[    0.403891] Loaded driver for PL330 DMAC-1 rk29-pl330
[    0.403906]  DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.404054] Loaded driver for PL330 DMAC-2 rk29-pl330
[    0.404068]  DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
[    0.435947] bio: create slab <bio-0> at 0
[    0.440353] SCSI subsystem initialized
[    0.440538] usbcore: registered new interface driver usbfs
[    0.440629] usbcore: registered new interface driver hub
[    0.454906] usbcore: registered new device driver usb
[    0.455280] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
[    0.455500] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
[    0.455666] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
[    0.455769] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
[    0.455871] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
[    0.486460] rk30-adc rk30-adc: rk30 adc: driver initialized
[    0.486529] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
[    0.486695] rk29-wdt rk29-wdt.0: starting watchdog timer
[    0.486933] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.487339] Bluetooth: Core ver 2.16
[    0.487390] NET: Registered protocol family 31
[    0.487401] Bluetooth: HCI device and connection manager initialized
[    0.487416] Bluetooth: HCI socket layer initialized
[    0.487428] Bluetooth: L2CAP socket layer initialized
[    0.487452] Bluetooth: SCO socket layer initialized
[    0.488489] rk fb probe ok!
[    0.493184] act8846_set_init,line=17
[    0.493196] act8846_set_init:g_pmic_type=3
[    0.494867] act8846_set_init  act_dcdc1 =1200000mV end

[    0.496622] act8846_set_init  vdd_core =1000000mV end
[    0.498373] act8846_set_init  vdd_cpu =1000000mV end
[    0.500123] act8846_set_init  act_dcdc4 =3300000mV end
[    0.501277] act8846_set_init  act_ldo1 =1000000mV end
[    0.502928] act8846_set_init  act_ldo2 =1200000mV end
[    0.504580] act8846_set_init  act_ldo3 =1800000mV end
[    0.506231] act8846_set_init  act_ldo4 =3300000mV end
[    0.507881] act8846_set_init  act_ldo5 =3300000mV end
[    0.509530] act8846_set_init  act_ldo6 =3300000mV end
[    0.510581] act8846_set_init  act_ldo7 =1800000mV end
[    0.512230] act8846_set_init  act_ldo8 =2800000mV end
[    0.512248] act8846_set_init,line=78 END
[    0.512293] i2c-core: driver [act8846] using legacy suspend method
[    0.512305] i2c-core: driver [act8846] using legacy resume method
[    0.512345] rk1000_control_probe
[    0.537236] rk1000_control_probe ok
[    0.537296] Switching to clocksource rk_timer
[    0.543569] Switched to NOHz mode on CPU #0
[    0.544242] Switched to NOHz mode on CPU #3
[    0.544249] Switched to NOHz mode on CPU #1
[    0.544257] Switched to NOHz mode on CPU #2
[    0.544596] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xdf02c000
[    0.544638] fb0:win0
[    0.544641] fb1:win1
[    0.544644] fb2:win2
[    0.544702] rk3188 lcdc1 clk enable...
[    0.569778] rk3188 lcdc1 clk disable...
[    0.628074] fb0:phy:97000000>>vir:e0000000>>len:0x1800000
[    0.628315] rk_fb_register>>>>>fb0
[    0.628609] rk_fb_register>>>>>fb1
[    0.661086] rk3188 lcdc1 probe ok!
[    0.661161] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xdf040000
[    0.661212] fb0:win0
[    0.661215] fb1:win1
[    0.661218] fb2:win2
[    0.661282] rk3188 lcdc0 clk enable...
[    0.686354] rk3188 lcdc0 clk disable...
[    0.686370] fb2:phy:97000000>>vir:e0000000>>len:0x1800000
[    0.686599] rk_fb_register>>>>>fb2
[    0.686890] rk_fb_register>>>>>fb3
[    0.686902] rk3188 lcdc0 probe ok!
[    0.724681] cfg80211: Calling CRDA to update world regulatory domain
[    0.747766] IT66121 probe success.
[    0.751140] NET: Registered protocol family 2
[    0.751258] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.751566] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.752541] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.753961] TCP: Hash tables configured (established 65536 bind 65536)
[    0.753974] TCP reno registered
[    0.753986] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.754011] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.754284] NET: Registered protocol family 1
[    0.802608] RPC: Registered named UNIX socket transport module.
[    0.802625] RPC: Registered udp transport module.
[    0.802634] RPC: Registered tcp transport module.
[    0.802644] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.802808] Unpacking initramfs...
[    0.868861] Freeing initrd memory: 1344K
[    0.868953] PMU: registered new PMU device of type 0
[    0.869065] efuse_version_val: efuse version = 51
[    0.869080] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 17000
[    0.869094]          adjust table freq=1608000 KHz, index=1350000 mV to index=1250000 mV
[    0.869109] efuse_version_val: efuse version = 51

[    0.869120] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 17000
[    0.869942] cpufreq: delete arm freq(1608000)
[    0.913975] rk3188 cpufreq version 2.2, suspend freq 816 MHz
[    0.914192] vpu: power on
[    0.914240] VPU_SERVICE: checking hw id 4831
[    0.926842] vpu: power off...done
[    0.926878] VPU_SERVICE: init success
[    0.927132] audit: initializing netlink socket (disabled)
[    0.927169] type=2000 audit(0.860:1): initialized
[    0.944065] highmem bounce pool size: 64 pages
[    0.944244] ashmem: initialized
[    0.954959] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.955209] NTFS driver 2.1.30 [Flags: R/W].
[    0.955369] fuse init (API version 7.16)
[    0.970386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.970398] io scheduler noop registered
[    0.970404] io scheduler deadline registered
[    0.970448] io scheduler cfq registered (default)
[    0.990722] rga: Driver loaded succesfully
[    0.990848] rk_serial.c v1.6 2013-12-23
[    0.990907] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
[    0.990993] rk_serial rk_serial.0: membase 0xdf048000
[    0.991038] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
[    0.991124] rk_serial rk_serial.3: membase 0xdf050000
[    0.991276] Rockchip ion module(version: 1.0) is successfully loaded
[    0.992798] loop: module loaded
[    0.992827] Android kernel panic handler initialized (bind=kpanic)
[    0.993272] PPP generic driver version 2.4.2
[    0.993361] PPP Deflate Compression module registered
[    0.993368] PPP BSD Compression module registered
[    1.053173] PPP MPPE Compression module registered
[    1.053184] NET: Registered protocol family 24
[    1.053193] tun: Universal TUN/TAP device driver, 1.6
[    1.053198] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.053354] usbcore: registered new interface driver sr9700_android
[    1.053372] Rockchip WiFi SYS interface (V1.00) ...
[    1.053403] Initializing USB Mass Storage driver...
[    1.053445] usbcore: registered new interface driver usb-storage
[    1.053452] USB Mass Storage support registered.
[    1.053528] usbcore: registered new interface driver usbserial
[    1.053553] USB Serial support registered for generic
[    1.053581] usbcore: registered new interface driver usbserial_generic
[    1.053588] usbserial: USB Serial Driver core
[    1.053609] USB Serial support registered for GSM modem (1-port)
[    1.053640] usbcore: registered new interface driver option
[    1.053646] option: v0.7.2:USB Driver for GSM modems
[    1.053668] USB Serial support registered for usi-modem
[    1.053701] usbcore: registered new interface driver usi-modem
[    1.275256] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[    1.275274] usb20_otg usb20_otg: DWC OTG Controller
[    1.275362] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
[    1.275389] usb20_otg usb20_otg: irq 48, io mem 0x00000000
[    1.275418] DWC_OTG: Init: Port Power? op_state=1
[    1.275424] DWC_OTG: Init: Power Port (0)
[    1.275467] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.275476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.275484] usb usb1: Product: DWC OTG Controller
[    1.275491] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
[    1.275497] usb usb1: SerialNumber: usb20_otg
[    1.275749] hub 1-0:1.0: USB hub found
[    1.275763] hub 1-0:1.0: 1 port detected
[    1.278310] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xdf100000
[    1.488642] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode

[    1.488663] usb20_host usb20_host: DWC OTG Controller
[    1.488690] usb20_host usb20_host: new USB bus registered, assigned bus number 2
[    1.488718] usb20_host usb20_host: irq 49, io mem 0x00000000
[    1.488758] DWC_OTG: Init: Port Power? op_state=1
[    1.488764] DWC_OTG: Init: Power Port (0)
[    1.488797] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.488806] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.488814] usb usb2: Product: DWC OTG Controller
[    1.488820] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
[    1.488826] usb usb2: SerialNumber: usb20_host
[    1.489059] hub 2-0:1.0: USB hub found
[    1.489071] hub 2-0:1.0: 1 port detected
[    1.489398] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
[    1.562864] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    1.562874] android_usb gadget: Number of LUNs=2
[    1.562883]  lun0: LUN: removable file: (no medium)
[    1.562889]  lun1: LUN: removable file: (no medium)
[    1.563082] android_usb gadget: android_usb ready
[    1.563245] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
[    1.563402] usbcore: registered new interface driver xpad
[    1.563566] remotectl probe j=0x0
[    1.563574] remotectl probe j=0x1
[    1.563579] remotectl probe j=0x2
[    1.563583] remotectl probe j=0x3
[    1.563588] remotectl probe j=0x4
[    1.563592] remotectl probe j=0x5
[    1.563597] remotectl probe j=0x6
[    1.563602] remotectl probe j=0x7
[    1.563691] input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1
[    1.565772] rtc_hym8563 1-0051: clock/calendar information is no longer guaranteed
[    1.568421] using rtc device, rtc_hym8563, for alarms
[    1.568445] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
[    1.568476] i2c /dev entries driver
[    1.568901] lirc_dev: IR Remote Control driver registered, major 250
[    1.568910] IR NEC protocol handler initialized
[    1.568916] IR RC5(x) protocol handler initialized
[    1.568921] IR RC6 protocol handler initialized
[    1.568926] IR JVC protocol handler initialized
[    1.568932] IR Sony protocol handler initialized
[    1.568937] IR RC5 (streamzap) protocol handler initialized
[    1.568942] IR LIRC bridge handler initialized
[    1.568947] Linux video capture interface: v2.00
[    1.569003] usbcore: registered new interface driver uvcvideo
[    1.569010] USB Video Class driver (v1.1.0)
[    1.569042] def_ref_volt: 1800mV, curr_ref_volt: 1800mV
[    1.569563] device-mapper: uevent: version 1.0.3
[    1.569757] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    1.569898] Bluetooth: HCI UART driver ver 2.2
[    1.569906] Bluetooth: HCI H4 protocol initialized
[    1.569913] Bluetooth: HCI Realtek H5 protocol initialized
[    1.569920] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[    1.569979] cpuidle: using governor ladder
[    1.569985] cpuidle: using governor menu
[    1.615329]
[    1.615331] drivers/mmc/core/core.c...2019..  ===== mmc_rescan Begin....[mmc0]
[    1.620398] rk29_sdmmc_change_clk_div..1684..  newDiv=62, newCLK=299Khz [sd_mmc]
[    1.620433] .Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20.  [sd_mmc]
[    1.620567] .Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20.  [sdio]
[    1.621915] usbcore: registered new interface driver usbhid
[    1.621923] usbhid: USB HID core driver
[    1.622178] logger: created 256K log 'log_main'
[    1.622234] logger: created 256K log 'log_events'
[    1.622292] logger: created 256K log 'log_radio'
[    1.622344] logger: created 256K log 'log_system'

[    1.622621] zram: Created 1 device(s) ...
[    1.623026] i2c-core: driver [RK1000_CODEC] using legacy suspend method
[    1.623034] i2c-core: driver [RK1000_CODEC] using legacy resume method
[    1.667150]
[    1.667152] mmc_attach_sd..1230..  ===== Begin to identify card as SD-card. [mmc0]
[    1.778346] rk29_sdmmc_change_clk_div..1684..  newDiv=0, newCLK=37125Khz [sd_mmc]
[    1.778393] mmc0: new high speed SDHC card at address 0001
[    1.778613] mmcblk0: mmc0:0001 SD32G 29.1 GiB
[    1.780023]
[    1.780025] msdos_partition..466... ==== Begin to parse sdcard-partition.  [mmcblk0]
[    1.780036] msdos_partition..535... ==== The sdcard has MBR. [mmcblk0]
[    1.780044] msdos_partition..548... ==== partition-1, size=1981MB.  [mmcblk0]
[    1.780052] msdos_partition..576... ==== main partition-1....[mmcblk0]
[    1.780061] msdos_partition..548... ==== partition-2, size=51MB.  [mmcblk0]
[    1.780069] msdos_partition..576... ==== main partition-2....[mmcblk0]
[    1.780076]  mmcblk0: p1 p2
[    1.780427] sdmmc_rescan_try_freq..1913..  ===== Initialize SD-card successfully. [mmc0]
[    1.780445]
[    1.780446] drivers/mmc/core/core.c...2019..  ===== mmc_rescan Begin....[mmc1]
[    1.781749] register rk1000 codec earlysuspend ok
[    1.781763] RK1000_CODEC 0-0060: Failed to add route Left DAC->Left Mixer
[    1.788208] asoc: rk1000_codec <-> rk29_i2s.1 mapping ok
[    1.788491] ALSA device list:
[    1.788498]   #0: RK29_RK1000
[    1.788593] GACT probability NOT on
[    1.788603] Mirror/redirect action on
[    1.788610] u32 classifier
[    1.788614]     Actions configured
[    1.788620] Netfilter messages via NETLINK v0.30.
[    1.788664] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.788925] ctnetlink v0.93: registering with nfnetlink.
[    1.788955] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    1.788962] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    1.789198] xt_time: kernel timezone is -0000
[    1.789318] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.789441] arp_tables: (C) 2002 David S. Miller
[    1.789479] TCP cubic registered
[    1.789485] Initializing XFRM netlink socket
[    1.789837] NET: Registered protocol family 10
[    1.790375] Mobile IPv6
[    1.790400] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.790507] IPv6 over IPv4 tunneling driver
[    1.791071] NET: Registered protocol family 17
[    1.791095] NET: Registered protocol family 15
[    1.791275] Bluetooth: RFCOMM TTY layer initialized
[    1.791290] Bluetooth: RFCOMM socket layer initialized
[    1.791297] Bluetooth: RFCOMM ver 1.11
[    1.791303] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.791311] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.791435] NET: Registered protocol family 35
[    1.791511] [BT_RFKILL]: Enter rfkill_rk_init
[    1.791587] [BT_RFKILL]: Request irq for bt wakeup host
[    1.791607] [BT_RFKILL]: ** disable irq
[    1.791679] [BT_RFKILL]: bt shut off power
[    1.797375] rk29_sdmmc_change_clk_div..1684..  newDiv=42, newCLK=294Khz [sdio]
[    1.820413] [BT_RFKILL]: bt_default device registered.
[    1.820459] Registering the dns_resolver key type
[    1.820490] pmic set pm_suspend_volt:
[    1.820502] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    1.820524] Registering SWP/SWPB emulation handler
[    1.820929] ddrfreq: verion 3.2 20131126
[    1.820937] ddrfreq: fix cpu pause bug

[    1.820944] ddrfreq: normal 456MHz video 0MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 300MHz
[    1.821254] rk3188 lcdc0 clk enable...
[    1.821269] lcdc0: dclk:148500000>>fps:60
[    1.821279] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
[    1.821769] ddrfreq: change freq to 445 MHz when normal
[    1.821917] lcdc0: dclk:27000000>>fps:60
[    1.824077] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
[    1.824086] lcdc0 wakeup from standby!
[    1.824092] lcdc0 win0 open,atv layer:1
[    1.824103] lcdc0 win1 closed,atv layer:1
[    1.824110] rk1000_tv ver 2.0 probe ok
[    1.824915] rtc_hym8563 1-0051: setting system clock to 2011-01-01 12:00:00 UTC (1293883200)
[    1.827599] asoc: dit-hifi <-> rk-spdif mapping ok
[    1.828013] usbcore: registered new interface driver snd-usb-audio
[    1.828306] Freeing init memory: 2204K
[    1.877422] usb 2-1: new high speed USB device number 2 using usb20_host
[    2.087923] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[    2.087935] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.087943] usb 2-1: Product: USB 2.0 Hub
[    2.088278] hub 2-1:1.0: USB hub found
[    2.088417] hub 2-1:1.0: 4 ports detected
[    2.197836] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    2.387409] usb 2-1.4: new full speed USB device number 3 using usb20_host
[    2.508029] usb 2-1.4: New USB device found, idVendor=0fe6, idProduct=9700
[    2.508040] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.508049] usb 2-1.4: Product: USB 2.0 10/100M Ethernet Adaptor
[    2.547625] sr9700_android 2-1.4:1.0: eth0: register 'sr9700_android' at usb-usb20_host-1.4, SR9700_ANDROID USB Ethernet, 00:e0:4c:53:44:58
[    2.662466] init: /dev/hw_random not found
[    2.662539] keychord: using input dev rk29-keypad for fevent
[    2.662549] keychord: using input dev rkxx-remotectl for fevent
[    3.141834] gp_rknand_info = : 0xde248400
[    3.141913] rk30_chip_set:1
[    3.141968] FtlInit!
[    3.141987] No.1 FLASH ID:2c 64 44 4b a9 0
[    3.141997] No.2 FLASH ID:f0 ff ff ff ff ff
[    3.143548] FTL version: 5.0.12 20140214
[    3.264695] gBootMedia = 1 gSdmmcFwPartOffset =0!
[    3.264706] rknand_buffer.c version: 4.40 20130830!
[    3.274330] 10 cmdlinepart partitions found on MTD device rk29xxnand
[    3.274340] Creating 10 MTD partitions on "rk29xxnand":
[    3.274351] 0x000000400000-0x000000800000 : "misc"
[    3.291096] 0x000000800000-0x000001400000 : "kernel"
[    3.296462] 0x000001400000-0x000002000000 : "boot"
[    3.301635] 0x000002000000-0x000004000000 : "recovery"
[    3.307154] 0x000004000000-0x000008000000 : "backup"
[    3.312514] 0x000008000000-0x000010000000 : "cache"
[    3.317789] 0x000010000000-0x000010400000 : "metadata"
[    3.323336] 0x000010400000-0x000010800000 : "kpanic"
[    3.329066] apanic: Bound to mtd partition 'kpanic'
[    3.329076] apanic: No panic data available
[    3.329087] 0x000010800000-0x00005ec00000 : "system"
[    3.343468] 0x00005ec00000-0x0001df400000 : "userdata"
[    3.350774] fs_mgr: parse_link_device : path = NULL
[    3.355514] fs_mgr: parse_link_device : path = NULL
[    3.360411] fs_mgr: parse_link_device : path = NULL
[    3.365303] fs_mgr: parse_link_device : path = NULL
[    3.370195] fs_mgr: parse_link_device : path = NULL
[    3.375087] fs_mgr: parse_link_device : path = NULL
[    3.379983] fs_mgr: parse_link_device : path = NULL
[    3.384875] fs_mgr: parse_link_device : path = NULL
[    3.389785] fs_mgr: ---------------resize_fs blk_dev /dev/block/mtd/by-name/system, type ext4
[    3.398308] fs_mgr: Running /sbin/resize2fs on /dev/block/mtd/by-name/system
[    3.406809] resize2fs: resize2fs 1.41.14 (22-Dec-2010)

[    3.414696] resize2fs: The filesystem is already 320512 blocks long.  Nothing to do!
[    3.414712] resize2fs:
[    3.427850] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    3.446810] EXT4-fs (mtdblock5): recovery complete
[    3.446927] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    3.463029] EXT4-fs (mtdblock6): warning: mounting unchecked fs, running e2fsck is recommended
[    3.463187] EXT4-fs (mtdblock6): mounted filesystem without journal. Opts: noauto_da_alloc,discard
[    3.618620] EXT4-fs (mtdblock9): recovery complete
[    3.618734] EXT4-fs (mtdblock9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    3.639752] UMP: Using OS memory backend, allocation limit: 1073741824
[    3.639767] UMP: UMP device driver -0d88e3e loaded
[    3.664424] Mali: Mali400 inside of rk3188!
[    3.664436] Mali: mali freq table num : 6
[    3.664444] Mali: mali freq table :Mali: 132,Mali: 179,Mali: 223,Mali: 297,Mali: 297,Mali: 446,Mali:
[    3.664477] Mali: init mali clock success
[    3.665799] Mali: Mali device driver loaded
[    3.668974] rk30_mirroring: Unknown symbol video_data_to_mirroring (err 0)
[    3.669014] rk30_mirroring: Unknown symbol audio_data_to_mirroring (err 0)
[    3.680458] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
[    3.681315] ipp irq 47
[    3.681612] IPP init, version rk30-ipp 1.003
[    3.754700] init: /dev/hw_random not found
[    3.775184] binder: 97:97 transaction failed 29189, size 0-0
[    3.781220] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
[    3.788235] init: cannot find '/system/bin/rild3', disabling 'ril-daemon3'
[    3.790696] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    4.000775] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
[    4.001668] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    4.001684] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    4.001873] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
[    4.055276] warning: `su' uses 32-bit capabilities (legacy support in use)
[    4.067910] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[    4.076129] init: powerctl: cannot expand '${sys.powerctl}'
[    4.081991] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[    4.082122] RKNAND_GET_DRM_KEY
[    4.082131] return ret = 0
[    4.098701] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[    4.109579] android_usb: already disabled
[    4.113962] mtp_bind_config
[    4.206611] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
[    4.301795] fs_mgr: parse_link_device : path = NULL
[    4.306540] fs_mgr: parse_link_device : path = NULL
[    4.311459] fs_mgr: parse_link_device : path = NULL
[    4.316361] fs_mgr: parse_link_device : path = NULL
[    4.318929] fs_mgr: parse_link_device : path = NULL
[    4.318956] fs_mgr: parse_link_device : path = NULL
[    4.318982] fs_mgr: parse_link_device : path = NULL
[    4.319011] fs_mgr: parse_link_device : path = NULL
[    4.319384] .204.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]
[    4.319394] .235.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]
[    4.474879] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
[    4.479978] .204.. MMC0 receive the message sd-Pending from VOLD.[sd_mmc]
[    4.480145] .204.. MMC0 receive the message sd-Idle-Unmounted from VOLD.[sd_mmc]
[    4.568852] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
[    4.889076] rk fb use 3 buffers
[    6.181084] init: sys_prop: permission denied uid:1000  name:sys_graphic.cam_hal.ver

there's also a "recovery" button, when I push it while powering it boots to a different recovery image, and gives me a simple sh shell with busybox installed. the setup there looks pretty limited, with no Wi-Fi connectivity etc:

Spoiler

DDR Version 1.04 20140217
In
DDR3
300MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=8 Size=2048MB
Memory OK
OUT
BUILD=====2
No.1 FLASH ID:2c 64 44 4b a9 0
OK! 742309
unsigned!
SecureBootEn = 0 0
Boot ver: 2014-03-03#2.13
RECOVERY key is pressed
UsbBoot 747700
UsbHook ...1401967
powerOn 1401992
 1401990 11402270
 12138882 Starting kernel...@0x60408000

Uncompressing Linux... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.36+ (wasser19641@gmail.com) (gcc version 4.7 (GCC) ) #306 SMP PREEMPT Sun Oct 12 11:26:31 CEST 2014
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: RK30board
[    0.000000] ddr size = 2048 M, set ion_reserve_size size to 125829120
[    0.000000] memory reserve: Memory(base:0x98800000 size:120M) reserved for <ion>
[    0.000000] memory reserve: Memory(base:0x97000000 size:24M) reserved for <fb0 buf>
[    0.000000] memory reserve: Total reserved 144M
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] CPU SRAM: copied sram code from c0f19000 to fef00100 - fef020c0
[    0.000000] CPU SRAM: copied sram data from c0f1afc0 to fef020c0 - fef029e4
[    0.000000] sram_log:   @      0q   @       P    1      /  !    aB@ 2   `" 2q    : 4q
[    0.000000] CLKDATA_MSG: pll_flag = 0x03
[    0.000000] cpll auto set rate error
[    0.000000] L310 cache controller enabled
[    0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
[    0.000000] DDR DEBUG: version 1.00 20131106
[    0.000000] DDR DEBUG: DDR3 Device
[    0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Total Capability=2048MB
[    0.000000] DDR DEBUG: init success!!! freq=300MHz
[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[    0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
[    0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.000000] Boot mode: RECOVERY (2) flag: RECOVER (0xc3524203)
[    0.000000] PERCPU: Embedded 7 pages/cpu @c343d000 s6976 r8192 d13504 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 483328
[    0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00430000 mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x0000
2000(misc),0x00006000@0x00004000(kernel),0x00006000@0x0000a000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00002000@0x00080000(metadata
),0x00002000@0x00082000(kpanic),0x00272000@0x00084000(system),-@0x002F6000(userdata) bootver=2014-03-03#2.13 firmware_ver=4.4.2
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 880MB 1024MB = 1904MB total
[    0.000000] Memory: 1898432k/1898432k available, 198720k reserved, 1449984K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff600000 - 0xffe00000   (   8 MB)
[    0.000000]     vmalloc : 0xdf000000 - 0xfe800000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xde800000   ( 488 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .init : 0xc0408000 - 0xc062f000   (2204 kB)
[    0.000000]       .text : 0xc062f000 - 0xc0e840a4   (8533 kB)
[    0.000000]       .data : 0xc0e86000 - 0xc0f18b28   ( 587 kB)
[    0.000000]        .bss : 0xc0f1c024 - 0xc194e328   (10441 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:352
[    0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] rk_timer: version 1.3
[    0.003740] Calibrating delay loop (skipped) preset value.. 1583.48 BogoMIPS (lpj=7917420)
[    0.012874] pid_max: default: 32768 minimum: 301
[    0.018136] Security Framework initialized
[    0.022768] Mount-cache hash table entries: 512
[    0.028338] Initializing cgroup subsys debug
[    0.033101] Initializing cgroup subsys cpuacct
[    0.038076] Initializing cgroup subsys memory
[    0.042949] Initializing cgroup subsys freezer
[    0.047922] CPU: Testing write buffer coherency: ok
[    0.134186] CPU1: Booted secondary processor
[    0.174184] CPU2: Booted secondary processor
[    0.214180] CPU3: Booted secondary processor
[    0.214217] Brought up 4 CPUs
[    0.231820] SMP: Total of 4 processors activated (6333.93 BogoMIPS).
[    0.239184] devtmpfs: initialized
[    0.249127] NET: Registered protocol family 16
[    0.254477] DVFS MSG:        AVS Value(index=0): 129 129 128 127 128 128 129 129 129 129
[    0.273372] lcdc0 is used as external display device contoller!
[    0.279956] lcdc1 is used as primary display device controller!
[    0.386731] rk29sdk_wifi_bt_gpio_control_init: init finished
<hit enter to activate fiq debugger>
    0.394287] console [ttyFIQ0] enabled, bootconsole disabled
[    0.394287] console [ttyFIQ0] enabled, bootconsole disabled
[    0.403289] Registered FIQ tty driver de0adc00
[    0.403872] Loaded driver for PL330 DMAC-1 rk29-pl330
[    0.403888]  DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.404038] Loaded driver for PL330 DMAC-2 rk29-pl330
[    0.404051]  DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
[    0.435923] bio: create slab <bio-0> at 0
[    0.440329] SCSI subsystem initialized
[    0.440513] usbcore: registered new interface driver usbfs
[    0.440605] usbcore: registered new interface driver hub
[    0.454879] usbcore: registered new device driver usb
[    0.455258] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
[    0.455479] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
[    0.455646] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
[    0.455750] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
[    0.455854] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
[    0.486434] rk30-adc rk30-adc: rk30 adc: driver initialized
[    0.486501] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
[    0.486677] rk29-wdt rk29-wdt.0: starting watchdog timer
[    0.486913] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.487319] Bluetooth: Core ver 2.16
[    0.487367] NET: Registered protocol family 31
[    0.487379] Bluetooth: HCI device and connection manager initialized
[    0.487393] Bluetooth: HCI socket layer initialized

[    0.487405] Bluetooth: L2CAP socket layer initialized
[    0.487430] Bluetooth: SCO socket layer initialized
[    0.488466] rk fb probe ok!
[    0.493150] act8846_set_init,line=17
[    0.493163] act8846_set_init:g_pmic_type=3
[    0.494836] act8846_set_init  act_dcdc1 =1200000mV end
[    0.496592] act8846_set_init  vdd_core =1000000mV end
[    0.498341] act8846_set_init  vdd_cpu =1000000mV end
[    0.500094] act8846_set_init  act_dcdc4 =3300000mV end
[    0.501248] act8846_set_init  act_ldo1 =1000000mV end
[    0.502898] act8846_set_init  act_ldo2 =1200000mV end
[    0.504558] act8846_set_init  act_ldo3 =1800000mV end
[    0.506210] act8846_set_init  act_ldo4 =3300000mV end
[    0.507859] act8846_set_init  act_ldo5 =3300000mV end
[    0.509508] act8846_set_init  act_ldo6 =3300000mV end
[    0.510559] act8846_set_init  act_ldo7 =1800000mV end
[    0.512207] act8846_set_init  act_ldo8 =2800000mV end
[    0.512225] act8846_set_init,line=78 END
[    0.512269] i2c-core: driver [act8846] using legacy suspend method
[    0.512281] i2c-core: driver [act8846] using legacy resume method
[    0.512322] rk1000_control_probe
[    0.537211] rk1000_control_probe ok
[    0.537273] Switching to clocksource rk_timer
[    0.543547] Switched to NOHz mode on CPU #0
[    0.544222] Switched to NOHz mode on CPU #2
[    0.544230] Switched to NOHz mode on CPU #3
[    0.544239] Switched to NOHz mode on CPU #1
[    0.544574] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xdf02c000
[    0.544618] fb0:win0
[    0.544621] fb1:win1
[    0.544624] fb2:win2
[    0.544682] rk3188 lcdc1 clk enable...
[    0.569762] rk3188 lcdc1 clk disable...
[    0.628030] fb0:phy:97000000>>vir:e0000000>>len:0x1800000
[    0.628272] rk_fb_register>>>>>fb0
[    0.628566] rk_fb_register>>>>>fb1
[    0.661052] rk3188 lcdc1 probe ok!
[    0.661129] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xdf040000
[    0.661181] fb0:win0
[    0.661185] fb1:win1
[    0.661187] fb2:win2
[    0.661251] rk3188 lcdc0 clk enable...
[    0.686323] rk3188 lcdc0 clk disable...
[    0.686340] fb2:phy:97000000>>vir:e0000000>>len:0x1800000
[    0.686568] rk_fb_register>>>>>fb2
[    0.686861] rk_fb_register>>>>>fb3
[    0.686874] rk3188 lcdc0 probe ok!
[    0.724657] cfg80211: Calling CRDA to update world regulatory domain
[    0.747743] IT66121 probe success.
[    0.751118] NET: Registered protocol family 2
[    0.751237] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.751543] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.752516] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.753937] TCP: Hash tables configured (established 65536 bind 65536)
[    0.753949] TCP reno registered
[    0.753961] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.753987] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.754263] NET: Registered protocol family 1
[    0.802587] RPC: Registered named UNIX socket transport module.
[    0.802602] RPC: Registered udp transport module.
[    0.802612] RPC: Registered tcp transport module.
[    0.802622] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.802789] Unpacking initramfs...

[    1.002882] Freeing initrd memory: 4288K
[    1.002976] PMU: registered new PMU device of type 0
[    1.003091] efuse_version_val: efuse version = 51
[    1.003105] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 17000
[    1.003119]          adjust table freq=1608000 KHz, index=1350000 mV to index=1250000 mV
[    1.003134] efuse_version_val: efuse version = 51
[    1.003145] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 17000
[    1.003967] cpufreq: delete arm freq(1608000)
[    1.047994] rk3188 cpufreq version 2.2, suspend freq 816 MHz
[    1.048215] vpu: power on
[    1.048265] VPU_SERVICE: checking hw id 4831
[    1.060860] vpu: power off...done
[    1.060899] VPU_SERVICE: init success
[    1.061152] audit: initializing netlink socket (disabled)
[    1.061190] type=2000 audit(1.000:1): initialized
[    1.078087] highmem bounce pool size: 64 pages
[    1.078262] ashmem: initialized
[    1.089043] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.089291] NTFS driver 2.1.30 [Flags: R/W].
[    1.089450] fuse init (API version 7.16)
[    1.104467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.104480] io scheduler noop registered
[    1.104486] io scheduler deadline registered
[    1.104526] io scheduler cfq registered (default)
[    1.124809] rga: Driver loaded succesfully
[    1.124938] rk_serial.c v1.6 2013-12-23
[    1.124996] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
[    1.125085] rk_serial rk_serial.0: membase 0xdf048000
[    1.125131] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
[    1.125216] rk_serial rk_serial.3: membase 0xdf050000
[    1.125368] Rockchip ion module(version: 1.0) is successfully loaded
[    1.126888] loop: module loaded
[    1.126918] Android kernel panic handler initialized (bind=kpanic)
[    1.127420] PPP generic driver version 2.4.2
[    1.127517] PPP Deflate Compression module registered
[    1.127525] PPP BSD Compression module registered
[    1.187263] PPP MPPE Compression module registered
[    1.187275] NET: Registered protocol family 24
[    1.187283] tun: Universal TUN/TAP device driver, 1.6
[    1.187290] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.187462] usbcore: registered new interface driver sr9700_android
[    1.187480] Rockchip WiFi SYS interface (V1.00) ...
[    1.187512] Initializing USB Mass Storage driver...
[    1.187555] usbcore: registered new interface driver usb-storage
[    1.187562] USB Mass Storage support registered.
[    1.187637] usbcore: registered new interface driver usbserial
[    1.187663] USB Serial support registered for generic
[    1.187692] usbcore: registered new interface driver usbserial_generic
[    1.187698] usbserial: USB Serial Driver core
[    1.187720] USB Serial support registered for GSM modem (1-port)
[    1.187750] usbcore: registered new interface driver option
[    1.187756] option: v0.7.2:USB Driver for GSM modems
[    1.187778] USB Serial support registered for usi-modem
[    1.187810] usbcore: registered new interface driver usi-modem
[    1.409297] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[    1.409314] usb20_otg usb20_otg: DWC OTG Controller
[    1.409381] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
[    1.409407] usb20_otg usb20_otg: irq 48, io mem 0x00000000
[    1.409435] DWC_OTG: Init: Port Power? op_state=1
[    1.409440] DWC_OTG: Init: Power Port (0)
[    1.409481] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.409490] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.409498] usb usb1: Product: DWC OTG Controller

[    1.409504] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
[    1.409510] usb usb1: SerialNumber: usb20_otg
[    1.409768] hub 1-0:1.0: USB hub found
[    1.409783] hub 1-0:1.0: 1 port detected
[    1.412314] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xdf100000
[    1.622668] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[    1.622697] usb20_host usb20_host: DWC OTG Controller
[    1.622724] usb20_host usb20_host: new USB bus registered, assigned bus number 2
[    1.622751] usb20_host usb20_host: irq 49, io mem 0x00000000
[    1.622791] DWC_OTG: Init: Port Power? op_state=1
[    1.622796] DWC_OTG: Init: Power Port (0)
[    1.622828] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.622837] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.622845] usb usb2: Product: DWC OTG Controller
[    1.622851] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
[    1.622858] usb usb2: SerialNumber: usb20_host
[    1.623096] hub 2-0:1.0: USB hub found
[    1.623107] hub 2-0:1.0: 1 port detected
[    1.623432] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
[    1.696903] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    1.696914] android_usb gadget: Number of LUNs=2
[    1.696921]  lun0: LUN: removable file: (no medium)
[    1.696928]  lun1: LUN: removable file: (no medium)
[    1.697112] android_usb gadget: android_usb ready
[    1.697283] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
[    1.697509] usbcore: registered new interface driver xpad
[    1.697677] remotectl probe j=0x0
[    1.697684] remotectl probe j=0x1
[    1.697689] remotectl probe j=0x2
[    1.697694] remotectl probe j=0x3
[    1.697698] remotectl probe j=0x4
[    1.697703] remotectl probe j=0x5
[    1.697707] remotectl probe j=0x6
[    1.697713] remotectl probe j=0x7
[    1.697829] input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1
[    1.699929] rtc_hym8563 1-0051: clock/calendar information is no longer guaranteed
[    1.702570] using rtc device, rtc_hym8563, for alarms
[    1.702594] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
[    1.702624] i2c /dev entries driver
[    1.703052] lirc_dev: IR Remote Control driver registered, major 250
[    1.703061] IR NEC protocol handler initialized
[    1.703066] IR RC5(x) protocol handler initialized
[    1.703072] IR RC6 protocol handler initialized
[    1.703077] IR JVC protocol handler initialized
[    1.703082] IR Sony protocol handler initialized
[    1.703087] IR RC5 (streamzap) protocol handler initialized
[    1.703093] IR LIRC bridge handler initialized
[    1.703098] Linux video capture interface: v2.00
[    1.703154] usbcore: registered new interface driver uvcvideo
[    1.703161] USB Video Class driver (v1.1.0)
[    1.703192] def_ref_volt: 1800mV, curr_ref_volt: 1800mV
[    1.703712] device-mapper: uevent: version 1.0.3
[    1.703904] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    1.704045] Bluetooth: HCI UART driver ver 2.2
[    1.704054] Bluetooth: HCI H4 protocol initialized
[    1.704060] Bluetooth: HCI Realtek H5 protocol initialized
[    1.704066] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[    1.704125] cpuidle: using governor ladder
[    1.704130] cpuidle: using governor menu
[    1.749511]
[    1.749514] drivers/mmc/core/core.c...2019..  ===== mmc_rescan Begin....[mmc0]
[    1.754568] rk29_sdmmc_change_clk_div..1684..  newDiv=62, newCLK=299Khz [sd_mmc]
[    1.754594] .Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20.  [sd_mmc]

[    1.754722] .Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20.  [sdio]
[    1.756052] usbcore: registered new interface driver usbhid
[    1.756060] usbhid: USB HID core driver
[    1.756312] logger: created 256K log 'log_main'
[    1.756365] logger: created 256K log 'log_events'
[    1.756418] logger: created 256K log 'log_radio'
[    1.756470] logger: created 256K log 'log_system'
[    1.756766] zram: Created 1 device(s) ...
[    1.757156] i2c-core: driver [RK1000_CODEC] using legacy suspend method
[    1.757166] i2c-core: driver [RK1000_CODEC] using legacy resume method
[    1.807097]
[    1.807099] mmc_attach_sd..1230..  ===== Begin to identify card as SD-card. [mmc0]
[    1.914576] register rk1000 codec earlysuspend ok
[    1.914590] RK1000_CODEC 0-0060: Failed to add route Left DAC->Left Mixer
[    1.918332] rk29_sdmmc_change_clk_div..1684..  newDiv=0, newCLK=37125Khz [sd_mmc]
[    1.918383] mmc0: new high speed SDHC card at address 0001
[    1.918578] mmcblk0: mmc0:0001 SD32G 29.1 GiB
[    1.919959]
[    1.919961] msdos_partition..466... ==== Begin to parse sdcard-partition.  [mmcblk0]
[    1.919976] msdos_partition..535... ==== The sdcard has MBR. [mmcblk0]
[    1.919985] msdos_partition..548... ==== partition-1, size=1981MB.  [mmcblk0]
[    1.919993] msdos_partition..576... ==== main partition-1....[mmcblk0]
[    1.920001] msdos_partition..548... ==== partition-2, size=51MB.  [mmcblk0]
[    1.920009] msdos_partition..576... ==== main partition-2....[mmcblk0]
[    1.920016]  mmcblk0: p1 p2
[    1.920379] sdmmc_rescan_try_freq..1913..  ===== Initialize SD-card successfully. [mmc0]
[    1.920396]
[    1.920398] drivers/mmc/core/core.c...2019..  ===== mmc_rescan Begin....[mmc1]
[    1.923888] asoc: rk1000_codec <-> rk29_i2s.1 mapping ok
[    1.924170] ALSA device list:
[    1.924176]   #0: RK29_RK1000
[    1.924273] GACT probability NOT on
[    1.924283] Mirror/redirect action on
[    1.924289] u32 classifier
[    1.924292]     Actions configured
[    1.924299] Netfilter messages via NETLINK v0.30.
[    1.924338] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.924601] ctnetlink v0.93: registering with nfnetlink.
[    1.924632] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    1.924639] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    1.924876] xt_time: kernel timezone is -0000
[    1.924994] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.925115] arp_tables: (C) 2002 David S. Miller
[    1.925153] TCP cubic registered
[    1.925159] Initializing XFRM netlink socket
[    1.925509] NET: Registered protocol family 10
[    1.926045] Mobile IPv6
[    1.926071] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.926179] IPv6 over IPv4 tunneling driver
[    1.926741] NET: Registered protocol family 17
[    1.926766] NET: Registered protocol family 15
[    1.926948] Bluetooth: RFCOMM TTY layer initialized
[    1.926964] Bluetooth: RFCOMM socket layer initialized
[    1.926971] Bluetooth: RFCOMM ver 1.11
[    1.926978] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.926986] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.927114] NET: Registered protocol family 35
[    1.927190] [BT_RFKILL]: Enter rfkill_rk_init
[    1.927265] [BT_RFKILL]: Request irq for bt wakeup host
[    1.927285] [BT_RFKILL]: ** disable irq
[    1.927397] [BT_RFKILL]: bt shut off power
[    1.937333] rk29_sdmmc_change_clk_div..1684..  newDiv=42, newCLK=294Khz [sdio]
[    1.960410] [BT_RFKILL]: bt_default device registered.
[    1.960458] Registering the dns_resolver key type

[    1.960481] pmic set pm_suspend_volt:
[    1.960493] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    1.960515] Registering SWP/SWPB emulation handler
[    1.960929] ddrfreq: verion 3.2 20131126
[    1.960936] ddrfreq: fix cpu pause bug
[    1.960943] ddrfreq: normal 456MHz video 0MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 300MHz
[    1.961259] rk3188 lcdc0 clk enable...
[    1.961273] lcdc0: dclk:148500000>>fps:60
[    1.961282] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
[    1.961768] ddrfreq: change freq to 445 MHz when normal
[    1.961914] lcdc0: dclk:27000000>>fps:60
[    1.964072] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
[    1.964082] lcdc0 wakeup from standby!
[    1.964087] lcdc0 win0 open,atv layer:1
[    1.964098] lcdc0 win1 closed,atv layer:1
[    1.964106] rk1000_tv ver 2.0 probe ok
[    1.964911] rtc_hym8563 1-0051: setting system clock to 2011-01-01 12:00:00 UTC (1293883200)
[    1.967592] asoc: dit-hifi <-> rk-spdif mapping ok
[    1.967991] usbcore: registered new interface driver snd-usb-audio
[    1.968285] Freeing init memory: 2204K
[    2.007403] usb 2-1: new high speed USB device number 2 using usb20_host
[    2.217975] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[    2.217987] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.217996] usb 2-1: Product: USB 2.0 Hub
[    2.218402] hub 2-1:1.0: USB hub found
[    2.218467] hub 2-1:1.0: 4 ports detected
[    2.517464] usb 2-1.4: new full speed USB device number 3 using usb20_host
[    2.638071] usb 2-1.4: New USB device found, idVendor=0fe6, idProduct=9700
[    2.638083] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.638092] usb 2-1.4: Product: USB 2.0 10/100M Ethernet Adaptor
[    2.678056] sr9700_android 2-1.4:1.0: eth0: register 'sr9700_android' at usb-usb20_host-1.4, SR9700_ANDROID USB Ethernet, 00:e0:4c:53:44:58
[    2.868585] init: /dev/hw_random not found
[    2.868849] android_usb: already disabled
[    2.869005] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    2.869017] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    2.877895] gp_rknand_info = : 0xde248400
[    2.877961] rk30_chip_set:1
[    2.878016] FtlInit!
[    2.878035] No.1 FLASH ID:2c 64 44 4b a9 0
[    2.879596] FTL version: 5.0.12 20140214
[    2.994673] gBootMedia = 1 gSdmmcFwPartOffset =0!
[    2.994683] rknand_buffer.c version: 4.40 20130830!
[    3.004330] 11 cmdlinepart partitions found on MTD device rk29xxnand
[    3.004340] Creating 11 MTD partitions on "rk29xxnand":
[    3.004350] 0x000000000000-0x000000400000 : "parameter"
[    3.021374] 0x000000400000-0x000000800000 : "misc"
[    3.026427] 0x000000800000-0x000001400000 : "kernel"
[    3.031647] 0x000001400000-0x000002000000 : "boot"
[    3.036672] 0x000002000000-0x000004000000 : "recovery"
[    3.042045] 0x000004000000-0x000008000000 : "backup"
[    3.047253] 0x000008000000-0x000010000000 : "cache"
[    3.052376] 0x000010000000-0x000010400000 : "metadata"
[    3.057774] 0x000010400000-0x000010800000 : "kpanic"
[    3.063432] apanic: Bound to mtd partition 'kpanic'
[    3.063441] apanic: No panic data available
[    3.063454] 0x000010800000-0x00005ec00000 : "system"
[    3.077651] 0x00005ec00000-0x0001df400000 : "userdata"
[    3.111943] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: discard
rty__irectocyopeana/pdape: yoerrnot find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting recovery on Sat Jan  1 12:00:01 2011
bootmode = unknown

recovery filesystem table
=========================
  0 /mnt/internal_sd vfat /dev/block/mtd/by-name/user 0
  1 /mnt/external_sd vfat /dev/block/mmcblk0 0
  2 /system ext4 /dev/block/mtd/by-name/system 0
  3 /cache ext4 /dev/block/mtd/by-name/cache 0
  4 /metadata ext4 /dev/block/mtd/by-name/metadata 0
  5 /data ext4 /dev/block/mtd/by-name/userdata 0
  6 /cust ext4 /dev/block/mtd/by-name/cust 0
  7 /custom ext4 /dev/block/mtd/by-name/custom 0
  8 /misc mtd misc 0
  9 /uboot mtd uboot 0
  10 /charge mtd charge 0
  11 /parameter mtd parameter 0
  12 /boot mtd boot 0
  13 /recovery mtd recovery 0
  14 /backup mtd backup 0
  15 /tmp ramdisk ramdisk 0

I:InternalSD_ROOT: /mnt/internal_sd
I:ExternalSD_ROOT: /mnt/external_sd
I:Set boot command "boot-recovery"
locale is [(null)]
stage is []
failed to read font: res=-1
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1920 x 1080)
[    3.234131] rk30-lcdc rk30-lcdc.0: blank mode:4
[    3.234143] rk30-lcdc rk30-lcdc.0: blank mode:0
       installing_text:  (1 x 1 @ 1896)
          erasing_text:  (1 x 1 @ 1599)
       no_command_text:  (1 x 1 @ 1599)
            error_text:  (1 x 1 @ 1599)
Recovery system v4.4.0

Recovery system v4.4.0
[    3.354441] EXT4-fs (mtdblock7): warning: mounting unchecked fs, running e2fsck is recommended
[    3.354611] EXT4-fs (mtdblock7): mounted filesystem without journal. Opts:
[    3.355352] FAT-fs (mmcblk0): invalid media value (0x00)
[    3.355361] FAT-fs (mmcblk0): Can't find a valid FAT filesystem
W:trying mount /dev/block/mmcblk0 to ntfs
[    3.468709] NTFS-fs error (device mmcblk0): read_ntfs_boot_sector(): Primary boot sector is invalid.
[    3.468723] NTFS-fs error (device mmcblk0): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[    3.468734] NTFS-fs error (device mmcblk0): ntfs_fill_super(): Not an NTFS volume.
read cmdline
Not enter sdboot!
auto sdcard update path: /mnt/external_sd/FirmwareUpdate/auto_sd_update.tag
bootmode = unknown
Command: "/sbin/recovery"


ro.rk.cpu=rk3188
ro.rk.soc=rk3188+
ro.rk.wifi_on=false
ro.rk.bt_enable=true
ro.rk.systembar.tabletUI=false
ro.rk.systembar.voiceicon=true
ro.rk.MassStorage=false
ro.rk.changescreen=false
ro.rk.homepage_base=http://pikotv.com
ro.rk.def_brightness=200
ro.rk.screenoff_time=-1
ro.rk.screenshot_enable=true

ro.rk.install_non_market_apps=truerue
ro.sf.hwrotation=0
ro.sf.lcd_density=160
ro.sf.fakerotation=false
ro.sf.lcdc_composer=0
ro.adb.secure=0
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=true
ro.ril.ecclist=112,911
ro.sms.capable=false
ro.boot.console=ttyFIQ0
ro.dlna.devicename=eHomeCenter
ro.wifi.channels=
ro.allow.mock.location=0
ro.audio.monitorOrientation=true
ro.board.platform=rk3188
ro.build.id=KOT49H
ro.build.date=Sun Oct 12 14:41:31 CEST 2014
ro.build.date.utc=1413117691
ro.build.host=pfullingen.str.redhat.com
ro.build.tags=test-keys
ro.build.type=user
ro.build.user=wasser
ro.build.display.id=KOT49H test-keys
ro.build.product=rk3188
ro.build.version.sdk=19
ro.build.version.release=4.4.2
ro.build.version.codename=REL
ro.build.version.incremental=eng.wasser.20141012.143755
ro.build.description=rk3188-user 4.4.2 KOT49H eng.wasser.20141012.143755 test-keys
ro.build.fingerprint=rockchip/rk3188/rk3188:4.4.2/KOT49H/eng.wasser.20141012.143755:user/test-keys
ro.build.characteristics=tablet
ro.rksdk.version=RK30_ANDROID$(PLATFORM_VERSION)-SDK-v1.00.00 \
ro.voice.capable=false
ro.ap_mdm=-1
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.notification_sound=pixiedust.ogg
ro.kernel.android.checkjni=0
ro.secure=0
ro.tether.denied=false
ro.vendor.sw.version=1.0.5
ro.carrier=unknown
ro.default.size=100
ro.factory.tool=0
ro.factory.hasGPS=false
ro.factory.hasUMS=false
ro.factory.without_battery=true
ro.factory.storage_suppntfs=true
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.name=rk3188
ro.product.board=manta
ro.product.brand=google
ro.product.model=Nexus 10
ro.product.device=manta
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.version=1.0.0
ro.product.usbfactory=rockchip_usb
ro.product.manufacturer=samsung
ro.baseband=unknown
ro.bootmode=unknown

ro.hardware=rk30board
ro.opengles.version=131072
ro.revision=0
ro.bootloader=unknown
ro.debuggable=0
ro.ap_has_alsa=-1
ro.factorytest=0
ro.ap_data_only=-1
ro.ap_has_earphone=-1
sf.power.control=2073600
net.bt.name=Android
net.change=net.bt.name
ril.function.dataonly=1
sys.hwc.compose_policy=6
sys.rkadb.wasser=0
sys.wallpaper.rgb565=0
sys.resolution.changed=false
init.svc.console=running
init.svc.ueventd=running
init.svc.recovery=running
rild.libargs=-d /dev/ttyACM0
rild.libpath=/system/lib/libril-rk29-dataonly.so
rild.libpath1=/system/lib/libreference-ril-mt6229.so
rild.libpath2=/system/lib/libreference-ril-mu509.so
rild.libpath4=/system/lib/libreference-ril-mw100.so
rild.libpath6=/system/lib/libreference-ril-sc6610.so
rild.libpath7=/system/lib/libreference-ril-m51.so
rild.libpath8=/system/lib/libreference-ril-mt6250.so
rild.libpath9=/system/lib/libreference-ril-c66a.so
rild.libpath10=/system/lib/libreference-ril-sew290.so
rild.libpath11=/system/lib/libreference-ril-u5501.so
rild.libpath12=/system/lib/libreference-ril-u7501.so
rild.libpath13=/system/lib/libreference-ril-aw706.so
rild.libpath14=/system/lib/libreference-ril-a85xx.so
rild.libpath15=/system/lib/libreference-ril-e1230s.so
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.nfc.se=false
debug.nfc.fw_download=false
debug.hwui.render_dirty_regions=false
media.rmvb.support=1
rild1.libpath=/system/lib/libreference-ril-sc6610-1.so
rild3.libpath=/system/lib/libril-rk29-dataonly.so
video.use.overlay=0
video.bluray.render=gpu
video.bluray.navigationMenu=hide
dalvik.vm.jniopts=warnonly
dalvik.vm.heapsize=384m
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=512k
dalvik.vm.dexopt-flags=m=y
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.heaptargetutilization=0.75
persist.sys.usb.config=mtp,adb
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.timezone=Europe/Berlin
persist.sys.strictmode.visual=false
persist.audio.currentplayback=9
persist.audio.lastsocplayback=9
persist.tegra.nvmmlite=1
keyguard.no_require_sim=true

ExternalSD_ROOT=/mnt/external_sd
InternalSD_ROOT=/mnt/internal_sd
UserVolumeLabel=RockChips

I:Set boot command ""

 

heres the busybox output:

  

# busybox
BusyBox v1.11.1 (2009-03-11 09:17:49 CST) multi-call binary
Copyright (C) 1998-2008 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.

Usage: busybox [function] [arguments]...
   or: function [arguments]...

        BusyBox is a multi-call binary that combines many common Unix
        utilities into a single executable.  Most people will create a
        link to busybox for each function they wish to use and BusyBox
        will act like whatever it was invoked as!

Currently defined functions:
        [, [[, addgroup, adduser, adjtimex, ar, arp, arping, ash,
        awk, basename, brctl, bunzip2, bzcat, bzip2, cal, cat, catv,
        chat, chattr, chgrp, chmod, chown, chpasswd, chpst, chroot,
        chrt, chvt, cksum, clear, cmp, comm, cp, cpio, crond, crontab,
        cryptpw, cttyhack, cut, date, dc, dd, deallocvt, delgroup,
        deluser, depmod, df, dhcprelay, diff, dirname, dmesg, dnsd,
        dos2unix, du, dumpkmap, dumpleases, echo, ed, egrep, eject,
        env, envdir, envuidgid, ether-wake, expand, expr, fakeidentd,
        false, fbset, fbsplash, fdflush, fdformat, fdisk, fetchmail,
        fgrep, find, fold, free, freeramdisk, fsck, fsck.minix,
        ftpget, ftpput, fuser, getopt, getty, grep, gunzip, gzip,
        halt, hdparm, head, hexdump, hostid, hostname, httpd, hush,
        hwclock, id, ifconfig, ifdown, ifenslave, ifup, inetd, init,
        inotifyd, insmod, install, ip, ipaddr, ipcalc, ipcrm, ipcs,
        iplink, iproute, iprule, iptunnel, kbd_mode, kill, killall,
        killall5, klogd, lash, last, length, less, linux32, linux64,
        linuxrc, ln, loadfont, loadkmap, logger, login, logname,
        logread, losetup, lpd, lpq, lpr, ls, lsattr, lsmod, lzmacat,
        makedevs, man, md5sum, mdev, mesg, microcom, mkdir, mkfifo,
        mkfs.minix, mknod, mkswap, mktemp, modprobe, more, mount,
        mountpoint, msh, mt, mv, nameif, nc, netstat, nice, nmeter,
        nohup, nslookup, od, openvt, passwd, patch, pgrep, pidof,
        ping, ping6, pipe_progress, pivot_root, pkill, poweroff,
        printenv, printf, ps, pscan, pwd, raidautorun, rdate, readahead,
        readlink, readprofile, realpath, reboot, renice, reset,
        resize, rm, rmdir, rmmod, route, rpm, rpm2cpio, rtcwake,
        run-parts, runlevel, runsv, runsvdir, rx, script, sed, sendmail,
        seq, setarch, setconsole, setkeycodes, setlogcons, setsid,
        setuidgid, sh, sha1sum, slattach, sleep, softlimit, sort,
        split, start-stop-daemon, stat, strings, stty, su, sulogin,
        sum, sv, svlogd, swapoff, swapon, switch_root, sync, sysctl,
        syslogd, tac, tail, tar, taskset, tcpsvd, tee, telnet, telnetd,
        test, tftp, tftpd, time, top, touch, tr, traceroute, true,
        tty, ttysize, udhcpc, udhcpd, udpsvd, umount, uname, uncompress,
        unexpand, uniq, unix2dos, unlzma, unzip, uptime, usleep,
        uudecode, uuencode, vconfig, vi, vlock, watch, watchdog,
        wc, wget, which, who, whoami, xargs, yes, zcat, zcip

 let me know if there is any more info I can give, or anything else I can try!

  • SteeMan locked this topic
Guest
This topic is now closed to further replies.
Go to topic listing

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.