Hello

I tried to retasrt my system, but it doesn't work.

Before i post my question i found this thread:

 

i can't find a solution in the thread. Does anybody knows, how he fixed it?

 

I need to restart the system.
Can i disable the user login to the beginn? i need to start without a login choice.

 

 

Thank you

 

 

Edited April 9, 20233 yr by jumbo125

On 4/8/2023 at 11:16 AM, jumbo125 said:

Can i disable the user login to the beginn? i need to start without a login choice.

You mean this?

https://www.google.com/search?q=debian+auto+login+cli

yes, but my problem is, that the restart not work. do you have a answer for it?

thank you

I have a similar continuous reboot issue and have narrowed it down...

 

I have an odroid-c2 with eMMC module flashed with Armbian_23.02.1_Odroidc2_jammy_current_6.1.14_xfce_desktop
I have the following connected to the USB ports.  1) USB to audio headphone/microphone jacks 2) Wifi keyboard dongle

 

Odroid-c2 starts up ok and presents me with the XFCE desktop.

 

The issue is if I have both the eMMC module and a SDHC card on the system and power up the system, it continuously reboots. Note that the SDHC card is not bootable. Just formatted with ext4

 

Note that I could boot the odroid-c2 with either eMMC module or SDHC card flashed with Armbian.

Edited April 18, 20233 yr by dev001
more info

Is there any solution to fix the problem or detect the fail?

Edited May 2, 20233 yr by jumbo125

@dev001

i use a  64GB Micro Micro SD Card MicroSDXC. reboot not work. can you give me a tip?

My observation is that you should have either an eMMC or SDHC card installed but not both. Installing both would cause a boot issue.

i have only a SDHC card. No eMMC card. Why you believe that i use a eMMC card?

 

I was stating my observation about my odroidc2. If you only have SDHC installed then have you verified that your SDHC is specified as UHS-I?

Read this https://forum.odroid.com/viewtopic.php?t=37363

Am 18.4.2023 um 13:25 schrieb dev001:

The issue is if I have both the eMMC module and a SDHC card on the system and power up the system, it continuously reboots. Note that the SDHC card is not bootable. Just formatted with ext4

okay, i check it.

 

My card is ext4 formated 😞
can i change it? which format do i need to maket the sdhc bootable?

should it fix the problem, when i convert it?

Edited August 13, 20233 yr by jumbo125

As mentioned previously, make sure your SDHC card is specified as UHS-I

You do not need to format your SDHC card. You need to flash the card with the Armbian image for the odroidc2.

vor 8 Stunden schrieb dev001:

You do not need to format your SDHC card. You need to flash the card with the Armbian image for the odroidc2.

Okay, i had flashed it with the armbian image for the odroid c2. So my last chance is to check, if it is specified as uhs-i

 

i will try to find it out

thank you

 

EDIT: yes it is u1.

i have this:

https://www.amazon.de/gp/product/B08JYDZ75X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Edited August 13, 20233 yr by jumbo125