June 13, 20233 yr It's quite some time ago that I used my rockpi however today I wanted to restart my project again (some sensors with an A/D Board connected to SPI). First of all I tested the Board on a Raspberry Pi (with Raspbian) there it is working as expected so it is not a hardware issue. I connected my board MOSI = GPIO2_B2 (Pin 29), MISO = GPIO2_B1 (Pin 31), CS = GPIO2_B4 (Pin 33), Clock = GPIO2_B3 (Pin 7). The matter is that it sometimes works and the correct data is received but just once in a while. For me it seems that the CS is not working properly but how to get SPI communication working correctly? In the attached screenshot the value 744 is the correct value, i attached it to show the behavior of the SPI Bus, 4095 equals FF when using spidev-test util. There is also another ambiguous value 2047. Below are the contents of my /boot/armbianEnv.txt overlays=spi-spidev param_spidev_spi_bus=2 param_spidev_max_freq=100000 The frequency is also the same as what is used by the board. I'm currently on Armbian 23.02 with Kernel 5.15.93 (but also tested on another Rock Pi 4 A version 1.4 with kernel 6.1, same result) so does anyboday have an idea how to solve that issue?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.