Skip to content
View in the app

A better way to browse. Learn more.

Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Latest Jammy on XU-4 slow after nand-sata-install

Featured Replies

I just installed latest Jammy on XU-4 and it was running fine off SD. Then I did nand-sata-install and you can see below what happened. This used to work fine with older versions.

 

sudo hdparm -Tt /dev/sda

/dev/sda:
 Timing cached reads:     2 MB in  5.54 seconds = 369.48 kB/sec
 Timing buffered disk reads:   2 MB in 10.33 seconds = 198.19 kB/sec


 

  • Author

OK, tried this:


 

lsusb
Bus 004 Device 003: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge

sudo nano /etc/modprobe.d/disable-uas.conf
options usb-storage quirks=174c:55aa:u

sudo hdparm -Tt /dev/sda

/dev/sda:
 Timing cached reads:   656 MB in  2.00 seconds = 327.95 MB/sec
 Timing buffered disk reads:  62 MB in 35.03 seconds =   1.77 MB/sec
 
 lsusb -t
 /:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
        |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=uas, 5000M
        |__ Port 2: Dev 4, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M

 

Still in UAS mode. Do you really need to recompile the kernel?

  • Author

armbianEnv.txt doesn't exist on Armbian_23.11.1_Odroidxu4_jammy_current_6.1.63.img or Armbian_23.11.1_Odroidxu4_bookworm_current_6.1.63.img.

 

I built image from dev branch and same deal. Stable branch (23.11) dies and doesn't build.

 

Oh crap I just read on the download page 

Quote

Run armbian-config utility and go to section system -> DTB and select optimized board configuration for Odroid HC1. The same config is valid for HC2 and MC1.

 

That creates the armbianEnv.txt file. I don't remember having to do that before. It's been a while since I've installed on XU4. OK that was it:

sudo hdparm -Tt /dev/sda

/dev/sda:
 Timing cached reads:   2042 MB in  2.00 seconds = 1022.35 MB/sec
 Timing buffered disk reads: 136 MB in  4.29 seconds =  31.68 MB/sec

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.