July 25, 20242 yr Hello, I'm using USB C to Ethernet adapter and the download speed is below 1Mbps while upload speed as expected. I have 600Mbps down and 500Mbps up ISP plan but since the adapter used USB2.0 it should cap both down and up at ~90Mbps, at least I have tested this with a Galaxy Tab. Image: Armbian_community_24.8.0-trunk.399_Orangepizero2w_bookworm_current_6.6.36_minimal.img.xz Power supply: 5V2A SD: Sandisk Ultra 64GB Adapter (100Mbps): Speedtest: ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 2: enxec9a0c1e8e6f: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000 link/ether ec:9a:0c:1e:8e:6f brd ff:ff:ff:ff:ff:ff inet 10.7.4.11/24 metric 100 brd 10.7.4.255 scope global dynamic enxec9a0c1e8e6f valid_lft 86390sec preferred_lft 86390sec 3: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 link/ether fe:ae:6b:87:53:f1 brd ff:ff:ff:ff:ff:ff 4: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000 link/ether 48:f5:61:9d:46:2c brd ff:ff:ff:ff:ff:ff inet 169.254.247.42/16 metric 2048 brd 169.254.255.255 scope link wlan0 valid_lft forever preferred_lft forever
July 25, 20242 yr Author Solution After switching to Samsung 25W power adapter, able to achieve 95Mbps on download. Meaning the 5V2A as advertise in their website was not enough I guess if use with USB device but no issue if use WiFi. Can closed this. Edited July 25, 20242 yr by NixiElectra
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.