Armbian on Raspberry Pi-5 doesn't see Radxa penta SATA hat

I wanted to try Armbian on a Raspberry Pi-5 with a Radxa penta SATA hat.
Installed:
Armbian_community_25.2.0-trunk.86_Rpi5b_bookworm_current_6.6.63_minimal.img

The SATA hat is not detected:

root@rpi5b:~# lspci
00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)
01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge

I would expect this:
root@raspi:~# lspci
0000:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)
0000:01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller
0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)
0001:01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge

What am I missing.

Thanks for your time.
ChrisO

Silly me. Just found it.

Add those two lines
dtparam=pciex1
dtparam=pciex1_gen=3
to
/boot/firmware/config.txt

and reboot.

Edited November 26, 20241 yr by ChrisO
Found the answer to my question