I made a configuration via armbian-config, but the camera does not work, here are the messages
 

/sys/bus/i2c/drivers/ov13855

3-0036  bind  uevent  unbind
 

sudo i2cdetect -y 3

     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:                         -- -- -- -- UU -- -- -- 
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
30: -- -- -- -- -- -- UU -- -- -- -- -- -- -- -- -- 
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
50: -- -- -- -- -- -- -- -- 58 -- -- -- -- -- -- -- 
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
70: -- -- -- -- -- -- -- --     

 

dmesg | grep ov13855

[   14.074752] platform csi2-dphy0: Fixed dependency cycle(s) with /i2c@feab0000/ov13855-1@36
[   14.338234] ov13855 3-0036: driver version: 00.01.04
[   14.338301] ov13855 3-0036: Failed to get power-gpios, maybe no use
[   14.338330] ov13855 3-0036: Looking up avdd-supply from device tree
[   14.338336] ov13855 3-0036: Looking up avdd-supply property in node /i2c@feab0000/ov13855-1@36 failed
[   14.338365] ov13855 3-0036: supply avdd not found, using dummy regulator
[   14.338418] ov13855 3-0036: Looking up dovdd-supply from device tree
[   14.338424] ov13855 3-0036: Looking up dovdd-supply property in node /i2c@feab0000/ov13855-1@36 failed
[   14.338434] ov13855 3-0036: supply dovdd not found, using dummy regulator
[   14.338454] ov13855 3-0036: Looking up dvdd-supply from device tree
[   14.338459] ov13855 3-0036: Looking up dvdd-supply property in node /i2c@feab0000/ov13855-1@36 failed
[   14.338468] ov13855 3-0036: supply dvdd not found, using dummy regulator
[   14.338484] ov13855 3-0036: could not get default pinstate
[   14.338487] ov13855 3-0036: could not get sleep pinstate
[   14.348869] ov13855 3-0036: Detected OV00d855 sensor, REVISION 0xb0
[   14.863602] ov13855 3-0036: Consider updating driver ov13855 to match on endpoints
[   14.863609] rockchip-csi2-dphy csi2-dphy0: dphy0 matches m00_b_ov13855 3-0036:bus type 5

with the original distribution the camera works

Providing logs with 

armbianmonitor -u

 helps with troubleshooting and significantly raises chances that issue gets addressed.