Allcon,

 

my pik2 constantly locks up. i havent been able to find anything that causes. going to cut this short before it locks up

 

http://ix.io/1e4Q

 

i have tried SD cards from san disk pny verbatim lexar: no change

 

i have tried different power supplies. the barrel jack under vairous voltages: many different power supplies i cannot find any consistancy.

 

Please download 5.42 image, updated u-boot should solve this issue, it is a memory problem with the storage location of the firmwares

thanks i will give it a shot tonight.

i used the new release and its running like a "swiss car" j/k it is so much more smooth and stable. can we use the install to usb drive or is that still a no go?

3 hours ago, hough said:

can we use the install to usb drive or is that still a no go?

 

I don't think that will work yet, the boot scripts are still what I had done to "make it work" with the old bootloader, so it's not ready.

 

Thank you for the update!

i have a 6 volt adapter into the barrel jack and with your revision things  seem to be running very well. thanks for thanking the time out for the help.

 

i will try to keep you updated of wierd happenings.

 

i am listening to youtube from a (Creative Xfi) and it sounds wonderful

1 hour ago, hough said:

have a 6 volt adapter

Keep an eye on your system voltages, I thought (will verify) that was a generally unprotected 5V input

will do, i like to live on the edge so i ran 7.5 into the barrel and the lights just flash. no harm to the board. 

 

i have used a y cable for the mcro usb but the  barrel worked better of course. i would have to scope it and im too lazy but if you need the data ill get it to you..