Allwinner sunxi

Hy I'm currently trying to run a DS18B20 Temperature Sensor on the PA20 Port on my Neo Core 2. The w1_gpio und w1_therm modules are loaded but still I can't see the senors in the /sys/bus/w1/devices/ folder. (28-xxxx) Now I read in different threads to edit the FEX file in the /boot/ folder. So I would bee to first covert the script.bin to the script.fex. However I can't find any *.bin file in the /boot/ folder... So is the PA20 Port the correct 1Wire port? And how can I change this port to eg. GPIOG11 if I can't find the script.bin in the /boot/ folder? Andy

When I ssh to my Banana Pi (I / A20) there is a delay of a few seconds till welcome screen / prompt. With Bananian it was instant as still is with second BananaPi with Bananian and all other kind of Pis I have, rock64 with Bananian no delay also, but faster cpu off course. Tried ssh -vvvv and a look at sshd logs, didn't found something indicating an error yet.

Is there any other firmware for the AP6255 available, besides the one made available for Khadas VIM at https://github.com/khadas/android_hardware_amlogic_wifi/tree/Vim/bcm_ampak/config/6255/BT or the one for the Raspberry Pi 3+ available e.g. at https://github.com/OpenELEC/misc-firmware/blob/master/firmware/brcm/BCM43430A1.hcd which uses also the same chipset? I am trying to make Bluetooth working on an Orange Pi Lite2. So far I had no success loading the firmware by issuing root@orangepilite2:~# brcm_patchram_plus --patchram /lib/firmware/brcm/BCM43430A1.hcd --enable_hci --bd_addr 11:22:33:44:55:66 --no2bytes --tosleep 1000 /dev/tty…

Yesterday ubuntu issued updates related to DRM, packages: ii libdrm-amdgpu1:armhf 2.4.99-1ubuntu1~18.04.1 armhf Userspace interface to amdgpu-specific kernel DRM services -- runtime ii libdrm-common 2.4.99-1ubuntu1~18.04.1 all Userspace interface to kernel DRM services -- common files ii libdrm-etnaviv1:armhf 2.4.99-1ubuntu1~18.04.1 armhf Userspace interface to etnaviv-specific kernel DRM services -- runtime ii libdrm-nouveau2:armhf 2.4.99-1ubuntu1~18.04.1 …

Hello. I'm having trouble with infrared receiver. Whether the sunxi_cir driver installed in kernel or not, there is nothing in /dev/input except "event0", which is the power controller. Dmesg doesn't show anything neither. Version: Armbian 4.5 Lamobo-r1 Debian jessie next (unofficial), kernel 4.2.3. IR support was declared on download web page, so I decided to get vanilla kernel. That's because I had already tried Bananian with 3.18 kernel, and there were huge problems with kernel ppp (up to freezes of whole device). Has anybody encountered this problem?

Hi, I am using A20 Micro Olinuxino card. I have problems with legacy built (Ubuntu 3.4.110). I also tried the other built Vanilla (Ubuntu 4.4.1). The second one is successfully booted. However the first one, although I have tried several SD cards, did not continue after loading the kernel. The monitor shows a noisy image and stop working. I couldn't connect to it with SSH either. So the problem is not only with the HDMI connection or Xorg. Somehow kernel stops booting. The reason I want to use the older kernel is because it has NAND Flash support and video HW acceleration support (as stated in armbian.com). Please point me to right direction. Regards.

Hello ladies and gentlemen, I am working on a project for which I use a Nanopi Neo Core with its mini shield. With this mini shield I encountered some problems. The first problem is when I want to know the IP address for an Ethernet connection I got the following answer: pi@nanopiair:~$ sudo ifconfig lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 0 bytes 0 (0.0 RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 …

Is it possible to add some gpio chip select for support more than one chip select on board ? Loooked on https://github.com/armbian/linux ... ers/spi/spi-sunxi.c I am not found any support of gpio here. Also here https://github.com/armbian/linux/blob/sun8i/drivers/spi/spi-sunxi.h we can see that only one chip select can be used: /* About CS */ #ifdef CONFIG_ARCH_SUN8IW1P1 #define SUNXI_CS_BITMAP(ch) (ch%2 == 0 ? 1 : 3) #define SUNXI_CS_NUM(ch) (ch%2 == 0 ? 1 : 2) #endif #ifdef CONFIG_ARCH_SUN9IW1P1 #define SUNXI_CS_BITMAP(ch) (ch == 3 ? 7 : 1) #define SUNXI_CS_NUM(ch) (ch == 3 ? 4 : 1) #endif #ifndef SUNXI_CS_BITMAP #defi…

The problem I have an USB endoscope camera that works fine with my Orange Pi lite's normal USB port. However I need both USB port for other devices, so I want to connect this same USB camera, which was orginally marketed as USB otg camera for android phones, using Opi lite's micro usb otg connector. What have I tried - In armbian-config menu, I have enabled usbhost0. I believe this overlay is for the usb otg port, but just to be sure I also enabled usbhost1, usbhost2 and usbhost3. - Using dtc I decompiled sun8i-h3-orangepi-lite.dtb into sun8i-h3-orangepi-lite.dtc. - In this dtc file, I looked up musb, and changed status = "disabled" to "o…

Hello! I recently bought a generic Waveshare 800x480 HDMI (B) USB Touchscreen (rev 3.0), and I'm having problems to make it work properly on Armbian. After a long research, I ended up realizing it's a common problem, and yet I haven't been able to find a solution. It seems there was a patch somewhere, but that link is not available anymore. I'm using the Armbian Desktop 5.31 , running on an Orange Pi One. I've already set it up using h3disp -m 800x480 -d, and tried everything but it won't work. Vertical resolution seems to be right, but horizontal only fits around 3/4 of screen and it's noisy (the same problem everyone seems to have). I have tried this with my P…

Is this the reason why I don't see my soc temperature and how I can I solve?

Hello everyone and thank you for wonderful work on Armbian. i was wondering if anyone has any experiences to share on booting orange pi pc over network, i know it's possible to do this using Raspberry pi, but what's the latest status on Orange PI PC? is there a u-boot build capable of doing so? is this even possible?

I have tried a few different suggestions that I have seen online to implement wifi on Orange PC with a wifi dongle. However, none them can work reliably. OrangePi zero works but wifi speed is very slow (about 1-2Mbps). I recently tried using Raspberry Pi with wifi dongles. It is almost plug and play and very reliable. I hope there is a way to do the same on OPi. If anybody know one, please let me know. I will be happy to try it out and report back.

I have two Olimex Lime 2 eMMC boards, both set up the same way – same HDDs, same batteries, same power supplies, etc. Both run: - Armbian 5.31 (although one was updated to it, and the other was freshly installed with that version) - Debian 9 “stretch“ (same issue when they were both on Debian 8 “wheezy” though) - Linux kernel 4.8.14-sunxi Yet, one shows the CPU temperature, and the other doesn’t. A (the fresh-installed one): cat /sys/class/thermal/thermal_zone0/temp 41800 B (the one updated to 5.31 from a previous 5.x version): cat /sys/class/thermal/thermal_zone0/temp cat: /sys/class/thermal/thermal_zone0/temp: Inv…

Hi Srs! I have problem in using Armbian 14 with orange pi zero .. I already used the Armbian system in my OrangepiZero. However, I reinstalled everything again and downloaded the latest version of the operating system here on the site. When I try to use onboard audio (both capture and output) does not work. I have already enabled the analog-codec and it still does not work. Remembering that I already used the equipment with the Armbian and used the onboard capture of the board perfectly. Thanks!

I'm powering a small PCB via the OTG port on my OPI PC Plus, however sometimes I need to be able to reboot the device. It is possible to cut power to the OTG port momentarily to force a reboot? I've seen mention of PL2 GPIO, but it is unclear to me how this should be setup. I've also looked at uhubctl, but that didn't work. Thoughts?

hi all i'm trying to boot my orange pi over the network. i have written u-boot into SPI-Flash memory. i modified boot.cmd script to download the kernel, init ram and script.bin from TFTP server. after downloading them all the kernel tries to start but it dose not proceed. I've attached the screenshot of the console. My boot.cmd Spoiler # DO NOT EDIT THIS FILE # # Please edit /boot/armbianEnv.txt to set supported parameters # setenv serverip 172.20.20.200 setenv load_addr "0x44000000" setenv overlay_error "false" # default values setenv rootdev "/dev/nfs" setenv verbosity "1" setenv console "both" setenv disp_mem_reser…

I can't get the LeMaker 5in LCD working with Armbian 5.04 legacy on LeMaker BananaPro. First things first: # uname -a Linux bpi2 3.4.110-sun7i #12 SMP PREEMPT Tue Mar 1 08:39:29 CET 2016 armv7l GNU/Linux # lsmod Module Size Used by cpufreq_userspace 3524 0 ft5x_ts 44223 0 spidev 6366 0 ap6211 624553 0 a20_tp 3365 0 8021q 18593 0 garp 6072 1 8021q stp 2032 1 garp llc 5365 2 stp,garp # dmesg [ 6.514195] ===========================ft5x_ts_init===================== [ 6.520934] ctp_fetch…

Has anybody a good latency after the RT-PREEMPT patch? I'm using Orange Pi One (H3), Ubuntu Desktop and legacy 3.4.113 kernel patched with 30-real-time143-full-plus-rt-fixes.patch. Also I have the isolcpus=3 enabled. And latency test results for this config is master@orangepione:~/rt-tests$ sudo ./cyclictest -a -t -n -p99 # /dev/cpu_dma_latency set to 0us policy: fifo: loadavg: 2.18 2.49 1.19 1/299 3693 T: 0 ( 3034) P:99 I:1000 C: 364441 Min: 7 Act: 31 Avg: 23 Max: 3655 T: 1 ( 3035) P:99 I:1500 C: 242985 Min: 7 Act: 32 Avg: 23 Max: 3578 T: 2 ( 3036) P:99 I:2000 C: 182252 Min: 7 Act: 43 Avg: 20 Max: 2198 …

I am using legacy kernel 3.4.113 with Nano-PI NEO/AIR. Up until recently every thing is fine. With NEO/AIR new boards nand-sata-install script is failing with "There is no targets". Unfortunately it is lot of work to upgrade the kernel to mainline at this stage. I greatly appreciate if anyone share the steps to fix this issue for this kernel.

I'm trying to get an nrf24l01 radio to work on my Orange Pi One but have not been successful. I'll document what I've done here. If you spot an error, please let me know. Start with fresh Armbian_5.20_Orangepione_Debian_jessie_3.4.112 image. Then apt-date update and apt-get upgrade. Attached nrf24l01 like this (pictures of header and radio are attached for verification); nrf24l01 color opo pin opo fn 1 GND blk 25 ground 2 VCC red 17 3v3 3 CE org 29 PA7 4 CSN ylw 24 CS0 (SPI-CE0) 5 SCK grn 23 SCLK 6 MOSI blu 19 MOSI 7 MISO mag 21 MISO 8 IRQ n/c git …

I would use the opi as ir transmitter for AC. Does anybody know if it is possible? Thanks

Hi there, I pulled the latest changes from github and created a fresh Debian Jessie Armbian Image for my BananaPi M2+. Specifically, I run: BOARD=bananapim2plus BOARD_NAME="Banana Pi M2+" VERSION=5.21 LINUXFAMILY=sun8i BRANCH=default ARCH=arm Through a lot of debugging and googeling, I found that the latest armbian Image uses a different BCM driver (https://github.com/igorpecovnik/lib/issues/484). Now I face the following issue: In order to use AP6216 with hostapd in access point mode, I added "bcmdhd op_mode=2" to /etc/module. I tried a number of things, e.g. using dhd instead of bcmdhd but without success? Any ideas where I can configure AP6216 in op_mode=2 (access …

Hi , Igor! Will you release Desktop version on base of Vanilla? Thanks.

Hi, I am trying to use the SPI interface on the board GPIOs of a BananaPi M1+. I have started the latest version of Armbian available for this board (Armbian_19.11.6_Bananapi_bionic_current_5.4.8) and after the initial configuration the "/boot/armbianEnv.txt" file has the following added lines: fdtfile=sun7i-a20-bananapi-m1-plus.dtb overlays=spi-add-cs1 spi-spidev param_spidev_spi_bus=0 I have rebooted but I am unable to use the spidevX.Y under the "/dev" folder. What am I missing? NOTE: I have tried several combinations of values on the armbianEnv.txt configuration file (ie: using only overlays flags without the other ones, using only the spi-spidev flag,…

Hey there So I was planning on using the OPZero on a robot that I had already made, which took use of SPIdev, and it was doing calls to the spidev driver in C. Now I noticed that the OPZero has 2 SPI channels, one for the NOR flash (Which isnt populated) on the back and another that goes to the GPIO headers on the device. Now I ran my script, and turns out that /dev/spidev0.0 is actually writing SPI commands to the rear SPI channel. This is apparenly SPI0 according to the schematics. Now following the schematics again, I want to access SPI1, which currently does not exist as a spidev file. I tried "modprobe spidev" to bring up the extra interface, but sadl…

I have tested the orange pi one xenial. When I say test it is not benchmark tests. I do not know what the numbers say anyway. I open several common programs and watch what htop says. If I run an mp4 file on a media player, libre office and file manager it runs well and htop says about 300mb. It is a 10usd computer and I do not expect it to equal a x86 desktop. If I open firefox, firefox crashes before starting. Because of not enough ram? If I open chromium or midori ram usage goes to 100%. Cpu does not. You cannot really browse sites very well. Youtube videos is the same. Is it becuase 512mb ram is not enough? On my gnulinux x86 n…

Hi. I've upgraded Buinic to Eoan and encountered an error with apt-get. Decided to have a fresh install of Disco from https://dl.armbian.com/orangepizero/ and got exact same error. I did nothing with the installation except that I've configured WiFi with ntmui-connect command. So I guess this is some issue with Ubuntu releases 19.xx root@orangepizero:~# apt-get update && apt-get upgrade Hit:1 http://ports.ubuntu.com disco InRelease Hit:2 http://ports.ubuntu.com disco-security InRelease Hit:3 http://ports.ubuntu.com disco-updates InRelease Hit:5 http://ports.ubuntu.com disco-backports InRelease Hit:4 https://apt.armbian.com disco InRelease Traceb…

HI, Yesterday night I upgraded from 3.4.112- 5.22 to 5.23 Today I made a reboot as login screen suggested. xxx@nuc:~$ ssh 192.168.1.50 ____ _ _ _ _ / ___| _| |__ (_) ___| |__ ___ __ _ _ __ __| | | | | | | | '_ \| |/ _ \ '_ \ / _ \ / _` | '__/ _` | | |__| |_| | |_) | | __/ |_) | (_) | (_| | | | (_| | \____\__,_|_.__/|_|\___|_.__/ \___/ \__,_|_| \__,_| Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.112-sun4i System load: 0.00 Up time: 1 day Memory usage: 8 % of 873Mb IP: 192.168.1.50 CPU temp: 23°C…

Hi, I am using Armbian for NanoPI NEO AIR + CAM500B. I am unable to see any /dev/video0. I am able to get the camera working with FA default image. Here is my dmeg output. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.112-sun8i (root@xenial) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #14 SMP PREEMPT Wed Sep 14 20:29:31 CEST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cac…

Hi everybody. My cubieboard does not boot with Armbian 5.25. Does anyone know what is the problem? I really thank you beforehand. Actually i turns off after a second! Armbian_5.25_Cubieboard2_Ubuntu_xenial_default_3.4.113_desktop.7z U-Boot SPL 2017.01-armbian (Feb 02 2017 - 02:16:24) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2017.01-armbian (Feb 02 2017 - 02:16:24 +0100) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Cubietech Cubieboard2 I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial SCSI: SATA link 0 timeout…

Hello all, Firstly, a huge thank you to Igor and team for Armbian, I love it and appreciate you for the effort and time you have dedicated to this amazing project, thank you. I have used Armbian on Cubieboard II for a number of years now, running my main server with QuadlogSCADA for my off-grid renewable system at my home. Now, I have had an Olimex LIME-2 eMMC4GB board sitting idle for a while on the corner of my desk and over the past few weeks have been inspired to do some programming with it. So, on this LIME2 board, I have the latest nightly builds, installed to eMMC, all working fine so far. Then, I though to connect a standard 20x4 ch…

I coudn't find in menu System -> Install optin for cloning OS from SD to eMMC. How can I get it back as on older version? Boards are Orange Pi +2E and Orange Pi PC+ OS Armbian v5.91 I tied even: git clone https://github.com/armbian/config cd config bash debian-config but same... Thx

So recently i noticed that the os image that i am running on my orange pi 3 is for Z28 pro, that's a tv box, when i firstly booted this board i booted it in an image made for orange pi3 and in the cli when i booted it it said running debian buster based armbian for orange pi 3, i have no idea how it switched to Z28 pro image, i don't even know where to find this image, i didn't modify any of the system files, i just set a nextcloud server, is this normal or not?

Hi Just got my first Orange Pi Zero today. Everything looking good, with the exception, if I run iperf tests between this and a linux host, the Orange Pi Zero will reboot without any error messages. I changed my power supply to a wall plug which can support 2.4amp easily, also tried to tune down the frequency to 900Mhz max, 4 cores, turned off HDMI/GPU, USB. DRAM is at minimum, 408 I think. Temperature remains at 55 to 58C Still once a while during heavy network, the board will reboot. The image i used is the legacy image posted on orange pi zero, Armbian_5.24_Orangepizero_Debian_jessie_3.4.113 Thanks Jerry

After trying the ESP32, CHIP and CHIP PRO, I now have the OPI Zero+2 H5 and after much research (the Armbian forums) and testing, was unable to get USB OTG and Bluetooth working. I'm particularly interested in Bluetooth Low Energy and WIFI. WIFI worked great, simply using nmtui, worked first time. Thanks for solving the AP6212A WIFI firmware issues. However, do I understand correctly the USB OTG (I want to connect the OPI Z+2H5 micro USB to a USB hub to connect a mouse and keyboard) is not working yet? Similarly, is the AP6212A bluetooth driver/firmware being worked on at the moment? In addition, I'm waiting for some cameras to be delivered, my next project being the CSI …

Hi. I'm a new user. I have a Banana PI M1+, that is connected to a monitor with maximum resolution of 1280x1024 and with only DVI port. I'm using Armbian_4.5_Bananapi_Debian_jessie_3.4.109, and I installed XFCE using tasksel. If I leave it without any user interaction, the monitor goes to sleep, and I'm not able to wake it up anymore. But it works, because I'm able to connect to it using putty from another computer. So I tried to install Armbian_4.5_Bananapi_Debian_jessie_3.4.109, but I have the same problem. I tried also to disable "Switch Off After" in the Display section of power management without success. Can someone help me please?

Hi in the last build of 17/05/2019, https://dl.armbian.com/orangepi3/nightly/Armbian_5.87.190517_Orangepi3_Ubuntu_bionic_dev_5.1.0.7z armbian won't boot and there are a black display My board is a opi3 2gbram + mmc 8GB The board is working, because in the mmc, I have installed an old version (5.82) and I can bood from the SD card with android 7 get form here: http://www.orangepi.org/downloadresources/OrangePi3/2019-01-23/orangepi3_0e7dae8bb1bf9678fda5754272.html I tried to connect via ssh from another computer, and it's works, I login, changed the default passwd, but after 1 or 2 minutes, the opi3 reboot and from th…

Hi , I am finding trouble using orange pi gpios, here my approach I am trying to scan 4x4 kepad using gpio how am I writing 0 to a particular gpio pin? step 1 : sunxi_gpio_set_cfgpin(pin, SUNXI_GPIO_OUTPUT); step 2: sunxi_gpio_pullup(pin ,SUNXI_PULL_DOWN); I am not sure whether I am correct here. I am not sure if I have to use UP or DOWN or NONE here in pull up call,but I tried UP and DOWN so for. step 3: sunxi_gpio_output(pin,val); here I am using val = 0 or 1 making pin low and high depending on my requrement. in my attempts I get vague results as ou…

Dear Community, I am actively using an Orange Pi Zero Plus 2 board and I want to build U-Boot mainline by myself. I donwloaded mainline version from Denx's git, but when I'm doing configuration for Orange Pi Zero Plus 2. it uses H5 chip, but my board works with H3. During building Armbian Images, build system downloads latest U-Boot version and build it for H3 chip. I'm new to u-boot and maybe someome will help to find propper configs. Kind regards

Hello everyone activating legend movie MPlayer vdpau? banana pi m1

Hi. I got NO SIGNAL on my TV during boot after "Starting kernel". Same with dev image builded from tool and with stable image too. Thanks.

Hi there, how do I configure / start an WiFi AP on OPi3? In armbian-config (found using google, and found on OPiPC+) from my current Buster (OOB + update / upgrade) there is NO option to set up an AP. I may configure it "manually" (edit config files) but I need some tutorial if there is no "menu style" config.

I have a orange pi pc (H3). I connected a thermal printer which has a TTL interface so I connected the TX wire from the printer to 8 and RX to 10 to orange pi. I change the serial port in my script to /dev/ttyS0 and tried a test print but it will not print. I have tried this in raspberry pi 2 and it works. Any tips how to connect the thermal printer to orange pi.

I've just started using armbian yesterday and one of the first things that i'm trying to do is use my cheap USB wireless module. The chipset is the RTL8188, but the armbian originally recognised and loaded the RTL8192eu driver. When trying to connect with 8192 driver it always returned "Bad Password". Changing the /etc/modules-load.d/modules.conf to 8188cus initially seemed to work, but on the validation stage itsimply freezed and automatically rebooted, repeating it for as many times as i tried. I've also test with others like 8192eu/8192cus/8188eu/8188cu and all of then either returned no wireless network found or freeze and reboot. Is there any way to solve th…

hi all, Use an old version of cubietruck. I Can use the new script /usr/lib/nand-sata-install for install my old version? Kernel 3.4.104-sunxi regards

I'm currently playing with a Banana Pi M1 + and don't seem to be able to get the GPIO to work. I *think* that I have correctly mapped the IO pins that I am using through the schematic and fex file to find the corrisponding GPIO number for debian. When playing around in /sys/class/gpio I am able to export the GPIO pin that I'm looking for and change it's properties, direction, value etc. However these changes don't seem to appear on the physical IO pins. I noticed that some of the pins that I'm using are shared by UART 2, so I have disabled that in the FEX file but still no luck. I have a feeling that this is probably going to be DTB related, however I'm a …

I want to use my GPIO pins on my OPi lite. After much research and testing, I have done the following - Add user pi to group gpio - Changed /etc/udev/rules.d/99-gpio.rules to SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\ chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\ chown -R root:gpio /sys/devices/platform/soc/1c20800.pinctrl/gpiochip0/gpio && chmod -R 770 /sys/devices/platform/soc/1c20800.pinctrl/gpiochip0/gpio;?\ '"???? Now, accessing GPIO pins is working fine via bash: (env) pi@orangepilite:~$ echo 65 > /sys/class/gpio/export (env) pi@orangepilite:~$ echo out > /sys/class/gpio/gpio65/direction …

Hello ppl. I have an Orange Pi Zero, and I have some issues using UART interface, it give me an output like this: ▒▒▒I▒%E▒Y=7▒g!=7▒Y=5▒[s▒i-''▒Y-9/▒Y=▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒Y=7▒c5!e=#=15Q=-▒a#'-#5▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒[5=9/57▒=5▒c5!-▒a'▒7==;=5▒57=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒}=9/5▒▒5;▒5▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒}7=#957▒muuu▒▒▒▒▒▒▒▒%=#=15%5#▒7=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒7-)▒5%5▒%!#-!▒7=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒Y=cW_▒7=5%!#▒▒▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒Y=7▒▒59▒▒'!9='▒y▒▒▒R▒%I▒▒▒▒%▒▒ai▒▒▒I▒%E▒Y=7▒gY{…

hi my kernel 3.4.113 from armbian my OrangePi Zero dont have poweron - button by default / i know system can wake up from gpios / IR signal / usb events / wakeonlan and another sourcec bu i try todo standby and wakeup after! withous any success (((( :/sys/power# cat state standby mem bootfast goto sleep echo mem > /sys/power/state or echo standby > /sys/power/state working fine ) but i cant wakeup system (((( i try gpio usb ir wakeonan what i do wrong ???? somebody can clarify my issue ??? my loaded modules lsmod g_ether 38598 0 ir_lirc_codec 3685 0 ir_nec_decoder 1556 0 lirc_dev 78…

I had bought 3 Orange Pi Zero h2+ cpu (1x256mb ram and 2x 512mb ram) I'had tried Armbian Debian and Ubuntu based, but nothing changed or solved, i'had also tried DietPi(a debian base as armbian), but the kernel still the same: root@192.168.1.181's password: ___ ____ _ _____ / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) |__ /___ _ __ ___ | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | | / // _ \ '__/ _ \ | |_| | | | (_| | | | | (_| | __/ | __/| | / /| __/ | | (_) | \___/|_| \__,_|_| |_|\__, |\___| |_| |_| /____\___|_| \___/ |___/ Welcome to ARM…

Hello, Installed some updates recently on OrangePi PC Plus and after reboot I'm stuck on boot screen with message "Starting kernel...". Would this be logged somewhere? Any way to recover from this or should I start from scratch? boot error

Hello: First, thank you for all your incredible work in armbian. It is really great what you've done so far. And future looks even better. I come here to try to solve a problem that I have with a cheap usb wifi dongle. The dongle usb identifier is: Bus 001 Device 006: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter With armbian 5.14 (and a fresh install image), I followed the instruction here https://forum.armbian.com/index.php/topic/1237-tutorial-opi-one-wireless-success/ to let it work, without problems. Nice tutorial. My problems began when I was trying to use the same dongle with a fresh installed armbian 5.20. The dongle is not auto…

Hi, I am new to Orange Pi ecosystem. I have a Orange Pi PC 2 running armbian and some times raspbian. I want to use a wifi adapter to this. Since there has been many discussions on which adapter to chose and how to chose I am really confused. Please help me select a wifi adapter which could be installed easily considering that I am a rookie.

I understand I'm working with an experimental build...just breaking stuff to learn... Is Xwindows a complete no-go on the current Xenial build? What have you done to get X to load? I installed using the following commands: sudo apt-get update sudo apt-get upgrade {at this point I had to do some finagling to get wlan0 to work again...thanks again @martinayotte!} sudo aptitude install xserver-xorg-core sudo aptitude install xserver-xorg sudo aptitude install xorg openbox sudo aptitude install ubuntu-desktop After the install, I ran "startx" and it bombed. xinit: giving up xinit: unable to connect to X server: Connection refused xin…

Hello friends! I Am using 3G modem(Huawei E171 connected by OTG cable) on my OPi One for internet, but one problem - modem after few days working freeze. Reboot don't help because not full power off on USB, and after reboot i don't see modem in /dev. Only after physical remove modem and install again it's initialized and work fine. Question: Can i power off USB from cli? # uname -a Linux orangepione 3.4.113-sun8i #18 SMP PREEMPT Thu Jun 15 02:16:06 CEST 2017 armv7l armv7l armv7l GNU/Linu # lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 00…

Hi! Periodically, time in two-three days, sharply increases CPU utilization, the system becomes disfunctional. SD card and power supply maybe not the best, but they working fine in other systems and I'm tried others. SSH hangs on login while this problem is actual, but i have a serial connection, so can investigate in real time. Please, advise, what to look when this situation came again? top - 03:02:15 up 24855 days, 3:14, 1 user, load average: 1.75, 1.77, 1.93 Tasks: 125 total, 3 running, 70 sleeping, 0 stopped, 8 zombie %Cpu(s): 17.4 us, 26.6 sy, 0.0 ni, 56.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem : 505152 total, 9724 free,…

So I just received a couple of Orange Pi Zeros. I thought for a fun first project I'd port the pi-hole project. The Pi-Hole project creates a black hole / dns server for your home network that filters out lots of extraneous advertising. Its a pretty nice project. Reference: https://pi-hole.net/and https://github.com/pi-hole/pi-hole I ended up using a semi automatic install for pi-hole: git clone --depth 1 https://github.com/pi-hole/pi-hole.git Pi-hole cd Pi-hole/automated_installer/ bash basic-install.sh There was one hiccup. The admin page for the pi-hole (run on your local network) in the browser includes a header that conveniently shows CPU temperatur…

Hello, i'M having this issue with the latest Armbian 5.75 stretch image with updated firmware. When booting with a huwei E303 modem is in the usb port the board fall in a eternal reboot. if i let the board boot as normal an then insert the modem everything is o.k. I tried with 4 others OPI PC+ and others E303 sticks, same thing. also tried with 5.65, same problem. BUT, with an earlier version 5.35 and it boots as normal.

Hello, Just received this board and I can't get it to turn on if the SD card is present. I've tried several cards and I know them to be good (Samsung Evo 32GB). Any ideas?

Boot from SD without any problems, then install to NAND (no error)... In NAND boot it comes in the log... (transcription from a photo) [ OK ] Started LSB: Set preliminary keymap. Starting Remount Root and Kernel File Systems... [FAILED] Failed to start Remount Root and Kernel File Systems See 'systemctl status systemd-remount-fs.service' for details. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems (Pre). Mounting /boot. [ OK ] Started Load/Save Random Seed [ OK ] Mounted /boot. The 'Failed' message is the only error in the log. Problem: Can ssh locally ('ssh localhost') but can't from outside (it shows nothing). ping is responding. If I …

Hi,I have a problem with the ssh wifi connection with the nanopi neo air it has every faith that I connect it is too slowI have disabled the NetworkManager with the following commandsSystemctl stop NetworkManager.serviceSystemctl disable NetworkManager.serviceAnd configured my network connection with the / etc / network / interfaces fileAnd also i have disabled iwconfigIwconfig wlan0 power offalways remains the problem of SSH slowthenks for your help

Hello guys, I am having problems with vlc, the video is running out of proportion and it is all over the interface, ie, even minimizing vlc the video is still being shown, I tried to change the codecs but I did not have a satisfactory result, because only the VDPAU works without lags Help me please, sorry for bad English.

//Update2: is there anyone have sunxi_cedar_mod.ko module for 3.4.107 kernel? //Update1: I've changed and recompiled script.bin file and now screen turn on, great! Hi, I tried 3.4.107 wheezy on my Micro with HDMI screen. It show some image and message at boot, and then there's no signal to display. I also tried to change display resolution in "boot.scr" file, and tried "a10disp changehdmimodeforce 4" command, and ssh terminal show: sunxi disp kernel module version is 1.0 Cannot change HDMI mode because HDMI is not enabled.

Dear Armbian Friends, My temperature sensor is not detected by board. Can somebody give me some advice what should I chceck / change / test now? Cheers! Lucas I tried: - another sample of DHT11 - changed cables to different ones - changed - both tested sensors were connected with 4.7k resistor between positive and data cable - tried different system versions like bionic, stretch and now jessie - tried to load modules via /etc/modules-load.d/modules.conf g_serial w1-sunxi w1-gpio w1-therm - or with /boot/armbianEnv.txt (disabling loading with modules.conf) wverbosity=1 logo=disabled co…

I tried as described in the manuals Lubuntu: 1)sudo apt-get update 2) sudo apt-get install plymouth-theme-* 3) sudo update-alternatives --config default.plymouth 4) sudo update-initramfs -u As a result, all the same boot black console rather than graphical theme. Please help us understand how to make the graphics theme at startup and reboot.

Hi to All! Currently i am using 3.4.107-cubietruck #14 SMP PREEMPT Wed Apr 29 11:57:42 CEST 2015 armv7l GNU/Linux including a WLAN USB Adapter AWUS036AC from ALFA. First question: Does anybody got this adapter to work with a cubietruck as a WLAN-AP? Second question: If yes, what driver did you use for the successful implementation? Third: How to disable the onboard WLAN? I want to use it as a 5GHZ (AC-standard) WLAN-AP! Many thanks in advance. Regards, Ireng

I am trying to switch legacy kernel to "next". I did it successfully with armbian-config for OrangePiPC (obviously Armbian was installed on SD card). Once I attempted to do the same with Orange Pi Plus and system installed onto internal EMMC then after reboot... nothing. I am wondering also if the issue is related to platform or the fact that Armbian was installed on EMMC. I have connected TTL2USB and following is the result (seems to be indefinite loop): U-Boot SPL 2017.11-armbian (Jan 25 2018 - 07:58:02) DRAM: 2048 MiB Trying to boot from MMC2 U-Boot 2017.11-armbian (Jan 25 2018 - 07:58:02 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I …

No sound card on 5.0 trusty vanilla, but it works on jessie. trusty: aplay -l aplay: device_list:268: no soundcards found... on jessie: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun4icodec [sun4i-codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Both are armbian 5.0 with kernel 4.4.1, on Cubieboard2 Also warning on installing cryptsetup on trusty: update-initramfs: Generating /boot/initrd.img-4.4.1-sunxi cryptsetup: WARNING: failed to detect canonical device of /dev/mmcblk0p1 cryptsetup: WARNING: could not determine root device from /etc/fstab This error doesn't appear on jessie. Also, on trusty the ha…

Hi, I seem to be unable to create a working image for my Orange Pi PC+ with a 4.x kernel (I want to use Docker). I had a working 4.7.3 install but a recent (this week) apt-get upgrade installed a 4.8.x kernel (and probably a u-boot) after which my Opi PC+ will not boot anymore (my home-router shows the opi for a short time but it disappears before I can do a ssh to the Opi PC+). None of the images I have or create with a 4.x kernel seem to want to work. Only the 3.4.112 images that I download will work. Since I fried my uart0 and I haven't been able to use uart1 I have not been able to debug this. So I was hoping someone has a working image with a 4.x kernel …

I got my OPi PC2 last week and flashed the latest armbian server version. Every time I enter "reboot" on SSH to reboot the system, or plug in the power cable. The system can not boot up with a great probability. My power source is the charger for SAMSUNG smartphone. The specification indicates it can provide 5V/2A current. With the UART, I found the uboot process was stuck after the statement "INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9". The LED is OFF in that moment. After plugging out/in the power cable multiple times, the system can be boot up successfully finally and works very well. I'…

Hello Armbian Kernel Team, I own a Cubietruck (CB3) and I wanted to setup a fresh debian server system. So I installed Armbian 5.14 (Debian Jessie) on my SD Card and booted the system up. Everything was working as expected, but I have special needs regarding the usage of my filesystems and storage devices. My desired configuration is (previously working under Armbian Wheezy): Cubietruck NAND -> /dev/nand1 (32 MB) = boot partition -> /dev/nand2 (max) = some data or maybe swap 60 GB SATA Drive (2,5") via SATA to USB adapter -> /dev/sdb1 (5 GB) = root filesystem -> /dev/sdb2 (55 GB) = some data 1 TB SATA Drive (3,5") via native SATA port o…

About 3 months ago i bought the Orange PI Zero Plus Orange Pi Zero Plus I installed Armbian Stretch and started playing around. I noticed that it got up to 71c which was to much so i shut it down and went on the net to buy some 5v fans to cool it. A month ago I received the first fans and noticed now that Armbian Buster had arrived. Since I hadn't gotten far with the config of Armbian Stretch I started on a new image. But to my disappointment the ARM processor is now clocked to 1008Mhz and not the 1.2Ghz the device is set to by manufacturer. I can guess that it is because of the heat problem that it is now set to…

Hi there, I have a Banana Pi M1+ and connected to it Silicon Power SSD 60 Gb. I've faced with the following error: Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00(see screenshots). Startup: https://drive.google.com/open?id=1s_1mkJWXTC02TnSyVlX8oZZQDaJpgXYu Kernel panic message: https://drive.google.com/open?id=1oDgmnrOspkYy5DY5bobFLTJSE3RJOVE6 I downloaded and wrote Armiban to the SD card from this link: https://dl.armbian.com/bananapi/Debian_stretch_next.7z, It started well. Then I performed apt update && apt upgrade -y and reboot the system. After that I've used 'nand-…

HowTo: Setting up resolution 1600x900 & 1366x768 ? &how can i set up other resolutions those are not in h3disp like 1600x900 board is orangepi-pc

Hello everyone. My OP-PC is dead, with NO HDMI signal, NO console output, NO network output (LEDs off), only 1 LED is on which indicates SD card inserted (if SD card removes, it off). when use newly created SD card with Armbian, SDcard OS partition not resized. when connect to power supply, I can hear current noise. before it dies, it runs armbian server image with mainline kernel (4.14), it doesn't look like thermal fail, due to it runs very well during summer. I guess it is shorted some place, but I can't find where! so which hardware test point could I use to detects hardware failurtes.

Hi, I think I'm right in saying that this board once had standard support? I noticed it is now community support and the download page lists that there might be Wi-Fi issues. I have this link for previous builds: https://armbian.hosthatch.com/archive/orangepizero/archive/ Is there a way of knowing when standard support stopped and community support started etc? Thanks!

Hi All, I would appreciate if someone can guide me on how to change the I2C speed? I'm using a OPI PC+ and the default speed is 400Khz when using the "IOCTL" method and would like to change to the standard 100Khz speed. Thank you

As we know, the PCIe on H6 is buggy, which doesn't offer linear address, and Linux cannot support such kind of configuration. However, the Cortex-A53 cores used by H6 supports virtualization, which can be used to change the order of the address space. Recently, I tried to make use of virtualization to provide linear mapping of PCIe, and I succeed in making an Intel 6205 wireless card working. The hypervisor code is at https://github.com/Icenowy/aw-el2-barebone . It's intended to start before U-Boot, and located at 0x40010000. A U-Boot fork that is patched to load the hypervisor is at https://github.com/Icenowy/u-boot/tree/h6…

Hi! Thanks for your great job. I compiled Armbian_5.32_Orangepizeroplus2-h5_Debian_stretch_dev_4.13.0.img with your building script from git, which included last kernel with Orange Pi zero+ H5 support. Pluged uart-adapter for control booting process. U-Boot SPL 2017.09-rc4-armbian (Sep 05 2017 - 11:03:34) DRAM: 512 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on H5 (1718) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):aa75c8d NOTICE: BL3-1: Built : 11:03:29, Sep 5 2017 INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address: 0x4…

Hello, I'd like to use I2S output on my A20, I can see on armbian website but I have no idea on how to activate the HW configuration. I tried to simply plug i2s input and output and type aplay -l but the system can't see any soundcard Can you please help ? Cheers

Hi all, With a fresh install of version 5.38 (jessie 4.14.15, idle since 5 min.), I've a CPU throttling and load issues : Spoiler root@OPZ2:~# armbianmonitor -m Stop monitoring using [ctrl]-[c] Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 07:29:43: 1200MHz 1.11 23% 13% 8% 0% 1% 0% 44.5°C 0/8 07:29:48: 1200MHz 1.18 1% 0% 0% 0% 0% 0% 43.1°C 0/8 07:29:53: 1200MHz 1.15 0% 0% 0% 0% 0% 0% 43.0°C 0/8 07:29:58: 1200MHz 1.14 0% 0% 0% 0% 0% 0% 41.7°C 0/8 07:30:04: 1200MHz 1.13 0% 0% 0% 0% 0% 0% 41.6°C 0/8 07:30…

Had some free time to toy around with Orange Pi Zero Used a image "Armbian_5.26_Orangepizero_Ubuntu_xenial_dev_4.10.0.img" build with 'compile.sh BRANCH=dev BOARD=orangepizero KERNEL_ONLY=no PROGRESS_DISPLAY=plain RELEASE=xenial BUILD_DESKTOP=no' - which should not do anything special ? 1) First steps - run upgrades and normal tweaking (changed hostname, disabled ipv6, changed ntp, changed time-zone, generated correct locale) 2) Ensure that WLAN0 is working as client - using 'nmtui' created a new connection to my desktop WLAN router - disabled auto connect from eth0 - reboot with serial connection - run example speedtest-cli to see that the driver do wo…

Please, help! How i can set resolution - 800x480??

Hi. I'm using CubieTruck and Armbian mainline up to dated version. The CT is a headless server, so I don't connect any cable to it. However, one day the ssh server in CT did not work, I tried to connect CT to a monitor using HDMI cable. Even though I connect a cable, I could not see anything, and the monitor said 'No signal'. (Well, if the hdmi cable was connected, and CT is booted with it, the output is ok with hdmi signal.) If I connect with a vga cable, there is no problem. Here's what I want. I want to see the screen when I connect CT with a hdmi cable, even if the cable has not been connected. (I hope you understand what I mean..) I followed thi…

Does anyone know if the Zero's on board WiFi chip XR819 can be disabled? The RJ45 is disabled by default, so there must be a way to disable the XR819 - right? Any thought appreciated.

Hello Community, I am trying to install Docker on my Cubietruck. As a guide i used the official guide by Docker https://docs.docker.com/install/linux/docker-ce/ubuntu/#upgrade-docker-ce When I am at actual installation step I walking in this following error msg. Does anyone have a idea where to start looking ? Thx.blub474

Hello, In the following environments of Cubietruck, a problem which the CPU core is not recognized only one has occurred. $ hostnamectl Static hostname: dns02.kometch.local Icon name: computer Chassis: n/a Machine ID: 609e2bf4c5884368b36018d67982759e Boot ID: 4faccf729c4042fc87013cb82494b486 Operating System: Debian GNU/Linux 8 (jessie) Kernel: Linux 4.1.6-sunxi Architecture: arm $ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 16.42 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer…

Hello guys, This is not a question, but a feedback I think may be useful for some. I have a cubieboard 2 server application using Igor's armbian running for 8 months in several places (~40 installations). In my application: The OS in installed on NAND Armbian 3.8 + wheezy + kernel 3.4.107 There is a postgresql instance running, writing approx. 25kB/s average (not constant) Ordered data mode journaling on From time to time I've problems on clients with system corruption (not only the database, but the whole filesystem - sometimes I couldn't event boot the cubieboard anymore, had several kernel panics and more weird stuff like thousands of filesystem errors at o…

I have several OpiOne Plus boards. They differ by the date of manufacture (let's say 1st batch and 2nd batch) 1st batch: Works with kernel 5.10.x but does not boot kernel 5.15.x. Red light is on, power meter shows very little consumption, ethernet does not go up. Switching to last available 5.10.x kernel resolves the situation. 2nd batch: Successfully work with both 5.10.x and work with 5.15.x. Green light is on, power meter shows adequate consumption, board works. I'm pretty sure, that no more "new" opi one plus will appear at Xunlong shop and this issue won't be fixed in visible future. But well.. How I can "freeze" kern…

I compiled full-armbian image for nanopi air. root@nanopiair:~# uname -a Linux nanopiair 4.19.25-sunxi #5.76 SMP Wed Feb 27 13:46:35 KST 2019 armv7l GNU/Linux and by armbian-config, on armbianEnv.txt overlays=spdif-out root@nanopiair:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SPDIF [On-board SPDIF], device 0: spdif-dit-hifi dit-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 root@nanopiair:~# speaker-test -tway -c2 -Dhw:0 speaker-test 1.1.3 Playback device is hw:0 Stream parameters are 48000Hz, S16_LE, 2 channels WAV file(s) Rate set to 48000Hz (requested 48000H…

while updating my dev-OPiOne Welcome to Armbian bullseye with Linux 5.5.8-sunxi package bsp-kernel[20.05.0-trunk] u-boot[20.05.0-trunk] dtb [20.05.0-trunk] firmware [20.05.0-trunk] config[20.05.0-trunk] branch[dev] Linux opi-one 5.5.8-sunxi #trunk SMP Wed Mar 18 21:19:37 +03 2020 armv7l GNU/Linux via apt update I did get the follwing error-message: Trigger für mime-support (3.64) werden verarbeitet ... E: Schreibfehler - ~LZMAFILE (28: Auf dem Gerät ist kein Speicherplatz mehr verfügbar) I did found out via df that /dev/zram0 = /var/log is used up to 100% :( root@opi-one(192.168.6.114):~# df Dateisystem 1K-Blöcke Benutzt Verfügbar…

I have some servo motor I would like to start but cannot find any info on how to do it. Is PWM available in Pi PC or Pi Zero? Thanks

Spoiler [55881.786168] 8<--- cut here --- [55881.789254] Unable to handle kernel paging request at virtual address bfd60e58 [55881.796482] pgd = 7d7d1ef9 [55881.799191] [bfd60e58] *pgd=00000000 [55881.802777] Internal error: Oops: 80000005 [#1] SMP THUMB2 [55881.808261] Modules linked in: rfkill zstd snd_soc_hdmi_codec dw_hdmi_cec dw_hdmi_i2s_audio sun8i_codec_analog snd_soc_simple_card sun8i_adda_pr_regmap sun4i_i2s snd_soc_simple_card_utils snd_soc_core ac97_bus sun8i_drm_hdmi snd_pcm_dmaengine snd_pcm dw_hdmi sun4i_gpadc_iio lima snd_timer industrialio cec sunxi_cedrus(C) snd gpu_sched v4l2_mem2mem sun8i_thermal soundcore videobuf2_dma_contig videobuf2_memo…

I've been trying to bring up Armbian on my Banana Pi M2 Ultra (with A40i SoC). First I tried using the community rolling release, and then building it myself from source code. In every case, it was failing to boot; on the HDMI console it was hanging at the stage where the initrd was attempting to scan for the root partition. ("Scanning for btrfs filesystems") Taking a closer look at the verbose output of the UART console during a boot attempt, I saw that there was an error message about the sunxi-mmc device driver experiencing a failure while it was enumerating the EMMC chip: [ 4.136553] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB [ 4.144362] sunxi…

Good Morning, I'm using the 5" LCD of LeMaker designed for Banana Pi. For some reason I changed from legacy Kernel to vanilla kernel. But now in the vanilla kernel touch screen driver isn't available anymore. In legacy kernel it the ft5x_ts module. Is there an other way to make my Display working with touch again? Displays: http://wiki.lemaker.org/BananaPro/Pi:LCD_Module Martin

Hi all. I'm running armbian in all my orangepi boards since I've them and the distro is great and we'll developed. (thanks!) I run them with telephone chargers (htc and Samsung) 2/1.5A directly connected to the board via a 30cm cable. I don't know what's the status of data pins (d+ d-) but I think they are left open by the cable. They are used for sdr use running dump1090 all the time. In the aim of reducing the heat I've disabled two cores (only recently) out of four and installed a copper heatsink on the cpu. The problem is that from time to time I found my boards unresponsive from ethernet and serial port, so completely stuck. Only a reboot works. Do you h…

How do I get a desktop running on this (legacy)? It only outputs a shell on the video out Additionally, is the hw video decoder enabled? Armbian_5.30_Orangepizero_Ubuntu_xenial_default_3.4.113

Hi to all, sorry if it is already described anywhere. I found some similar issues but no solution, except ...has to be modified.. or anything similar. Two days ago I updated my Armbian Jessie server on may Cubietruck with apt-get update && apt-get upgrade After that my homeautomation didn't show the SoC temperature any more. first I looked for an error in the software, then after a lot of reboots I noticed the temperature also missing in the armbian startscreen. The command cat /sys/devices/virtual/thermal/thermal_zone0/temp was responsed by cat: /sys/devices/virtual/thermal/t…

Hi, I cannot find how to install PHP7 on my OrangePiPC 3.4.113-sun8i I installed apache and mariadb by "apt-get install apache2 mariadb-server mariadb-client mariadb.common" but how do I install PHP7? thanX advance, Antonios