SD card and PSU issues

Hello, I'm getting strange erros from my board.. i dunno what else i can do.. i tried many images (focal, buster, bionic..), few different SDs and PSUs.. Always getting error like that: Someone can help pleae? Thanks

I just ran apt update && apt upgrade on my Tinkerboard S, now it boots to a backtrace and I can't connect to it either. Might a recent update have problems? I have attached a screenshot of the backtrace.

Tried a few builds such as https://github.com/armbian/community/releases/download/202248/Armbian_22.11.0-trunk_Nanopiduo_kinetic_edge_6.0.10.img.xz#nanopiduo and the image doesn't even expand. No heartbeat flaching. Not sure how to troubleshoot this.

Hi, I'm proud owner of an ODROID XU4 REV 0.1 20180912 and would like to use your latest Image. Here are the steps I have done on my Win 10 - 1803 PC: Downloading your image file from your site Unpacking with 7zip to .img Starting Etcher Portable 1.5.63 Select the .img file Connect my eMMC card (16GB) to my CardReader This card is auto-selected by Etcher as Target device Click on Flash Etcher tranfers the image to the eMMC card and then validates it. When ready i close Etcher, remove the card safely from my PC and put it onto my ODROID-XU4 I connect only a LAN cable and a power cable to th…

Just for information (i know there is no support): under heavy load i have such error (for 3 times on different re-runs) Spoiler [76957.139777] monerod[1798]: undefined instruction: pc=000000000054a3e0 [76957.139788] Code: 00942f40 00000000 00000402 00001c60 (00000000) [76988.126797] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: IN [76988.126811] sd 0:0:0:0: [sda] tag#1 CDB: opcode=0x28 28 00 03 00 08 18 00 00 08 00 [76988.130108] scsi host0: uas_eh_device_reset_handler start [76988.254794] usb 4-1: reset high-speed USB device number 2 using ehci-platform [76…

Hi - My brand new nanopi M4 (2gb) will boot the friendly elec nanopi images just fine, it'll boot to a usable text console with the armbian rockpi minimal image, but none of the supported images (or any unsupported ones) from the armbian nanopi m4 download page will boot or generate video. Same sd card, sufficient power, flashed with etcher just to make sure. What's the best way to root cause/fix this?

I had a NanoPi NEO2 Black lying around with an old (but working) Armbian image on which I decided to wipe and re-flash. As per usual I check my DHCP server to see which IP it is assigned, but it never showed up. At this point I hooked up one of my UART adapters to it after re-flashing the image (Armbian_21.02.1_Nanopineo2black_buster_current_5.10.12.img): INFO: Configuring SPC Controller NOTICE: PMIC: Assuming H5 reference regulator design INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: cortex_a53: CPU workaround for 1530924 was applied NOTICE: …