SD card and PSU issues

Usage of /: 100% of 15G Last login: Sat Mar 30 13:41:33 2019 from 192.168.1.238 root@Ender3:~# df Filesystem 1K-blocks Used Available Use% Mounted on udev 184064 0 184064 0% /dev tmpfs 50508 2812 47696 6% /run /dev/mmcblk0p1 14696736 14483996 37088 100% / tmpfs 252532 0 252532 0% /dev/shm tmpfs 5120 4 5116 1% /run/lock tmpfs 252532 0 252532 0% /sys/fs/cgroup tmpfs 252532 4 252528 1% /tmp /dev/zram0 49584 31828 14172 70% /var/log tmpfs 50504 0 …

Hello! Shortform: SDCard recreated from .iso image does not boot. #### Detailed: I use an Odroid as my Minecraft server. I have a fast 32GB card in it, and a usb hdd for swap and media files. After the setup was working, and after each update, I pulled the card from the machine (after shutting down) and plugged it into my PC to make a backup: dd if=/dev/sdc bs=4M | gzip -c >/media/backup/odroid.img.gz In case I ever needed to recreate the card, I have this line to run: gunzip -c /media/backup/odroid.img.gz | dd of=/dev/sdc bs=4M /dev/sdc is a placeholder for whichever dri…

I have a nanopc t4 and I make armbian buster booteble and it takes a few second and then the screen goes on and I wait a 1 hour and noting is going happening he does nothing IMG_0222.MOV

I've been looking for ways to fix this all afternoon but I'm giving up. I flash the latest version of the image with BalenaEtcher, it takes about 10 min approximately to boot. I log in I do the setup, and the partition / is only 2GB, I reboot the red light stops flashing and the board stays with a steady green light does not respond to ping. I pull the cable and start in armbian the partition is still the same at 2GB, I check the resize2fs service and it does not start. I don't know what I'm doing wrong, the PSU is working properly, I did a health test to the SD is also OK. I don't know what else to check.

I have a Rock64 I'm using for about 3-4 years. last month November, '24, due to a power failure issue, the Memory card got corrupted and won't boot anymore. I backed up the memory card using win32disk imager to rock64_corrupted.img now if I insert the memory card in a debian 12 machine, then I can see all files. root@debian:~# lsblk sdb 8:16 1 29.8G 0 disk └─sdb1 8:17 1 29.5G 0 part /media/user/ddc95179-99af-4380-b45b-fa41999ac3d0 root@debian:~# fdisk -l /dev/sdb Disk /dev/sdb: 29.81 GiB, 32010928128 bytes, 62521344 sectors Disk model: Mass-Storage Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 5…

I wanted to setup wifi using the on my Orange PI one. I have a rtlsdr in the regular port and want to mount the Orange Pi in a different room without a wired connection. Is it possible to use the usb otg port for that? I can plug in usb storage drives and they are picked up but not the wifi or rtlsdr are picked up when I plug them in.

Armbian_24.2.1_Orangepizero2_bookworm_current_6.6.16_minimal This is working. Armbian_25.5.1_Orangepizero2_bookworm_current_6.12.23_minimal Armbian_community_26.8.0-trunk.7_Orangepizero2_trixie_current_6.18.41_minimal These two are not taking me to login screen even after waiting for 10 minutes after bootup. It gets stuck at line called starting kernel. I tried to boot multiple times hoping that new versions should be smooth. But it wasn't the case.