SBC News

Description station-m3: move to rockchip-rk3588 family. Add UEFI_EDK2 support for station-m3. Remove the fan control binary file because automatic fan control has been added in this commit. How Has This Been Tested? [x] Almost all hardware functions(HDMI, WiFi, BT, GbE, USB...). [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View th…

networking: main-config: introduce NETWORKING_STACK to control network exts; allow "none"; fix typo networking: exts: introduce sanity checks, debug info protect against enabling networking exts directly debug logging fix typo in ext name networking: main-config: introduce NETWORKING_STACK to control network exts; allow "none"; fix typo NETWORKING_STACK can be set to none (in config phase, pre-extensions) to not-add any networking extensions keep defaulting to systemd-networkd if BUILD_MINIMAL and NetworkManager otherwise fix typo in extension name add NETWORKING_STACK to change-tracking View the full article

Description The forked helper workflow ran regardless whether ARMBIAN_SELF_DISPATCH_TOKEN was set or not, generating errors if the secret could not be found. In addition, simplify and beautify the workflow. How Has This Been Tested? [ ] To be tested in future automatic workflow runs, if no errors are generated Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas View the full article

Collabora is headed to Amsterdam for IBC! Drop by to see our work on the DAB protocol, our integration of LCEVC, and our latest XR project, ElectricMaple. View the full article

It's unwanted impurity, don't touch my git config How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. Running on NixOS, current causes fatal error Checklist: Please delete options that are not relevant. [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [X] My changes generate no new warnings [X] Any dependent changes have been merged and published in downstream modules View the full article

Ultenic T10 is a 2-in-1 smart vacuum cleaner and mopping system with a self-emptying base that’s quite similar to the Cybovac S31 robot I reviewed a little over a year ago. The Cybovac vacuum cleaner still works fine, but it has some shortcomings, so when Ultenic asked me whether I would be interested in reviewing their T10 unit, I accepted, and here I am with a new smart robot vacuum cleaner that I’ll review with the Android app in a larger house. Ultenic T10 unboxing The package and hardware are very similar to what I got with the Cybovac model. The robot comes with a charging base that’s pretty large since it includes its own dust bag for the self-emptying function. Ke…

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more. View the full article

Linux Kernel 4.8 is out and once more Collabora engineers did a significant contribution to the Kernel. For this latest release, Collabora provided 101 patches from 8 engineers, our biggest contribution to date in single kernel release! View the full article

Description If we don't need to build u-boot, we can special BOOTCONFIG=none. But this will also prevent to copy bootscript. How Has This Been Tested? [X] Build Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

LilyGO T-Dongle-S3 is a USB dongle based on ESP32-S3 dual-core microcontroller with WiFi 4 and Bluetooth 5.0 connectivity, a microSD card slot, as well as an optional 0.96-inch color display. You may remember the company launched the T-Dongle ESP32-S2 last spring, and I first thought it was an update to ESP32-S3, but the new T-Dongle-S3 has quite more compact design and a smaller set of features that makes it suitable for data logging and displaying basic information over a wireless connection. T-Dongle ESP32-S2 development board specifications: Wireless SoC – Espressif Systems ESP32-S3 with Dual-core 32-bit Xtensa LX7 microcontroller up to 240MHz RISC-V ULP Co-processor …

Description Patch was already eliminated in 5.15, resolve "edge" https://github.com/armbian/build/commit/9680fc46a01f70984e7b4b4c975b8dc4ecd8798e View the full article

Add TV Box targets to stable builds per discussion at the 23/01/18 Developers Meeting. Added aml-s9xx-box and rk3318-box (rk322x-box was already there) Changes to be committed: modified: config/targets.conf View the full article

Rockchip showcased some new processors at Mobile World Congress 2023: the RK3528 for TV boxes, and the RK3562 for tablets both with a Cortex-A53 CPU subsystem, but the former comes with a Mali-450 GPU, and the latter with a faster Mali-G52 2EE GPU. Both are clearly for entry-level devices, but I’m a little surprised they didn’t go with Cortex-A55 cores instead. Rockchip demonstrated the new processors in a TV box running Android 13 and a tablet with a 144,506 score in the latest Antutu benchmark as shown below. Rockchip RK3528 preliminary specifications: CPU – Arm Cortex-A53 processor (core count unspecified) GPU – Arm Mali-450 GPU with AFBC compression support Memory – L…

We quickly mentioned the Qualcomm Robotics RB1 and RB2 development kits in our post about Lantronix Open-Q 2210RB and 4210RB SiPs mostly to complain about the lack of information at the time. But things have changed the Qualcomm Robotics RB1 and RB2 devkits for cheaper, smaller Linux-powered robots with lower power consumption are now available, and we have more details with three options: Core Kit, Vision Kit, and Full Kit. So let’s have a closer look. All kits are based on the Qualcomm Robotics RB1/RB2 Core Kit with the following (preliminary) specifications: System-on-module RB1 – Thundercomm TurboX C2210 SoC – Qualcomm QRB2210 CPU – Quad-core Cortex-A53 processor at …

Description Minor change to emmc-pins overlay: add power sequence for both emmc and sdcard. May provide some better compatibility. How Has This Been Tested? [x] Tested on several tvbox boards, none of them regressed Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Add missing bluetooth service like meko and khadas edge 2 Jira reference number [AR-9999] How Has This Been Tested? [x] Got a feedback from the forum Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

rockchip ATF M0 code should use "arm-none-eabi-" toolchain to compile. "arm-linux-gnueabi-" toolchain causes LD error. Description When building rk3399 ATF, following error pops up when linking M0 codes. error: PHDR segment not covered by LOAD segment How Has This Been Tested? After this change, rk3399 ATF build passes. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downs…

Description Currently there is no HDMI output on edge 6.5 kernel on rk3228/rk3328. Forum discussion https://forum.armbian.com/topic/26978-csc-armbian-for-rk3318rk3328-tv-box-boards/?do=findComment&comment=171661 This PR will restore 'less than or equal' match of clocks that was lost in patch transition from 6.3 to 6.4: https://github.com/armbian/build/blob/6d981baba68699b0c6ada476704556e11dd661bc/patch/kernel/archive/rockchip64-6.3/rk356x-vop2-support.patch#L333 https://github.com/armbian/build/blob/6d981baba68699b0c6ada476704556e11dd661bc/patch/kernel/archive/rockchip64-6.4/rk356x-vop2-support.patch#L333 How Has This Been Tested? [x] rk3328-box + FullHD HDMI displ…

rk35xx+rockchip-rk3588/legacy: switch to rk-5.10-rkr6 branch rk35xx+rockchip-rk3588/legacy: switch to rk-5.10-rkr6 branch also set KERNEL_GIT_CACHE_TTL=120 to lower cache TTL from 1 hour to 2 minutes View the full article

Description Minor formatting fix. extensions should use tabs as indentation as @viraniac pointed. Definitely not mixed space/tabs. Also minor fix in examples to fully comply with spec. View the full article

Description dockerproxy.com is not avaiable from China mainland, but there are many alternative mirrors, for example we can deploy one to cloudflare: https://github.com/ciiiii/cloudflare-docker-proxy I have deployed mine: ghcr.haguro.top Documentation summary for feature / change Please delete this section if entry to main documentation is not needed. If documentation entry is predicted, please provide key elements for further implementation into main documentation and set label to "Needs Documentation". You are welcome to open a PR to documentation or you can leave following information for technical writer: [x] short description: customized GHCR_MIRROR_ADDRESS [x] s…

Fixes: https://github.com/armbian/build/issues/7052 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. Running on NixOS Checklist: Please delete options that are not relevant. [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [X] My changes generate no new warnings [X] Any dependent changes have been merged and published in downstream modules View the full article

I’ve spent a bit more time with Ubuntu 22.04 on Khadas VIM4 Amogic A311D2 SBC, and while the performance is generally good features like 3D graphics acceleration and hardware video decoding are missing. But I was pleased to see a Linux hardware video encoding section in the Wiki, as it’s not something we often see supported early on. So I’ve given it a try… First, we need to make a video in NV12 pixel format that’s commonly outputted from cameras. I downloaded a 45-second 1080p H.264 sample video from Linaro, and converted it with ffmpeg: [crayon-6289ed6d13e21975150960/] I did this on my laptop. As a raw video, it’s pretty big with 3.3GB of storage used for a 45-second vi…

Mixtile Blade 3 is a Rockchip RK3588 SBC with up to 32GB RAM designed for server applications, notably to build clusters through a U.2 edge connector with 4-lane PCIe Gen3, SATA 3.0 to interconnect multiple boards. What was not clear so far is how multiple boards would be connected, as we were just shown two boards connected by a U.2 cable, which does not scale, and does not provide power as the 12V input also comes with the U.2 connector. The company has now provided more details showing how it’s done, namely through a breakout board that connects to the U.2 edge connector, and allows cluster design as shown below. The U.2 breakout board comes with a 6-pin connector 12V …

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver. View the full article

Next week our friends at Igalia will be hosting this year’s Web Engines Hackfest. Collabora will be there! We are gold sponsors, and have three developers attending. It will also be an opportunity to celebrate Igalia’s 15th birthday. Looking forward to meet you there! View the full article

fixes Jetson-nano legacy and installation on emmc in btrfs mode View the full article

Groupgets PureThermal 3 (PT3) is a hackable thermal webcam that ships with the low-cost FLIR Lepton FS module, and is compatible with FLIR Lepton (2.x – 3.x) LWIR camera core. The company explains the new model offers the same basic functionality as the PureThermal 2 but with a few changes and additional features, although the motivation for the new design was primarily to address component shortages. Some changes include the removal of pads to install an RF shield, and the Tag-Connect TC2030 programming connector is replaced by the Tag-Connect EC-10-IDC. PureThermal 3 specifications with changes highlighted in bold: Microcontroller – STMicro STM32F412 Arm Cortex-M4 MCU @…

OnLogic IGN800 is an industrial edge gateway based on the Raspberry Pi CM4 module pre-loaded with the Ignition Edge HMI, SCADA (Supervisory Control And Data Acquisition), MES, and IIoT software platform from Inductive Automation. The hardware is not exactly new, as the Onlogic IGN800 is simply the OnLogic Factor 201 industrial PC introduced earlier this year, but that ships with Ignition Edge in order to provide a cost-effective solution for automation projects. OnLogic IGN800 specifications: SoM – Raspberry Pi CM4 with Broadcom BCM2711 quad-core Arm Cortex-A72 processor @ up to 1.5 GHz, up to 8GB LPDDR4 RAM, up to 32GB eMMC flash Additional storage – Optional M.2 SATA SS…

Pimoroni Automation 2040 W is an industrial/automation controller based on the Raspberry Pi Pico W board that supports I/Os from 6V up to 40V and offers 2.4GHz WiFi 4 connectivity. The board offers plenty of interfaces including the ADC inputs, four digital inputs, three digital outputs, and three relays whose signals are all available through screw terminals, as well as two Qwiic/STEMMA QT connectors for further expansion. Automation 2040 W specifications: Controller – Raspberry Pi Pico W with Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller @ 133 MHz with 264KB SRAM, 2MB flash, 802.11b/g/n WiFi 4 module I/Os 3x 12-bit ADC inputs up to 40V 4x digital inputs up …

We’ve previously covered the EdgeBox-RPi4 industrial controller powered by a Raspberry Pi Compute Module 4 and plenty of I/Os such as RS485, RS232, digital inputs and outputs, and connectivity options such as Gigabit Ethernet, WiFi 5, Bluetooth 5, and 4G LTE. But if you don’t quite need the power of a Linux controller, the EdgeBox-ESP-100 industrial edge controller based on an ESP32-S3 dual-core WiFi and Bluetooth microcontroller and offering a similar set of features, albeit with twists, may be an interesting option. EdgeBox-ESP-100 specifications: Microcontroller – Espressif Systems ESP32-S3 dual-core Tensilica LX7 microcontroller @ 240 MHz with AI vector instructions, …

No descriptionView the full article

Description Just maintenance. View the full article

base-files: add the upstream version both to the artifact_version and the reversioned; possibly fixes #5702 base-files: add the upstream version both to the artifact_version and the reversioned; possibly fixes #5702 OCI tags can't have "+" or "~" so replace those with "--" before using in OCI tag apt (repo) version will have whatever upstream has, including "+" and/or "~" View the full article

Description Update odroidxu4-current kernel to 6.1.60. How Has This Been Tested? [x] Reboot of my Odroid HC1 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…

Despite the many obstacles brought on by the pandemic, Collabora continues to build and strengthen its engineering and administration teams for the road ahead. Join us in welcoming Angelica, Raghavendra, Doug, Italo and Theodotos! View the full article

This fall, we're thrilled to be sponsoring not one, but five great conferences! View the full article

Description We plan to refactor rootfs caching and this is first part. This commit supports attaching to last cache release number and also checking previous three releases for file. There is more to come as per https://armbian.atlassian.net/browse/AR-1277 Merge is needed at once as old caching system is down. Jira reference number AR-1277 How Has This Been Tested? [x] Made few images Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnin…

Description This pr replaces nanopi's rtl8153 led patch with openwrt's, and removes useless led triggers. Also fixed support for orangepi-r1plus, including broken ethernet and gpio for led. How Has This Been Tested? [x] current [x] edge Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

add support OPI-800 View the full article

SB Components is running another crowdfunding campaign with the EnkPi ePaper display powered by a Raspberry Pi Pico W board and offered in four different sizes namely 2.9-inch, 4.2-inch 5.83-inch, and 7.5-inch. Each mainboard also comes with a USB Type-C port, a microSD card socket, an RTC with a backup battery holder, a buzzer, six user buttons, and a JST connector for expansion with GPIO, I2C, UART, and ADC signals. EnkPi specifications: MCU board – Raspberry Pi Pico W with Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller, 2MB QSPI flash, WiFi 4 module. Storage – MicroSD card socket Display connected over SPI to the Pico W board 2.9-inch tricolor ePaper display …

Qualcomm QCX216 is a new IoT-optimized LTE Cat1 bis modem with a data rate of up to 10 Mbps at ultra-low power and support for WiFi-based terrestrial positioning thanks to the company’s database of billions of geolocated beacons. LTE Cat1 bis is an update to LTE Cat1 that does not require software and hardware upgrades to the base stations, enables smaller, simpler, and cheaper designs with a single antenna, and delivers higher speeds than LTE Cat M1 typically used in IoT applications. Qualcomm QCX216 LTE IoT modem will be used in smart utility meters, trackers, e-mobility solutions, parking meters, home automation and security equipment, and other location-based solution…

Edatec CM4 Sensing is a compact industrial computer based on the Raspberry Pi Compute Module 4 (CM4) with multiple RS485, RS232, and CAN bus interfaces, an HDMI port, two USB ports, Gigabit Ethernet, and optional WiFi, Bluetooth, and/or 4G LTE connectivity. The industrial mini PC can operate in the -25 to 70°C temperature range, supports 8 to 28V DC wide voltage input, includes an RTC, and the single board computer also features a MIPI DSI interface to connect the official Raspberry Pi 7-inch display as well as an FPC interface with HDMI and USB touch. Edatec CM4 Sensing specifications: SoM – Raspberry Pi CM4 module with Broadcom BCM2711 quad-core Cortex-A72 SoC, 1GB to…

Debian moved the non-free firmware into it's own sub-repository since bookworm View the full article

Description This introduces support for the BPI-CM4 module following the specifications of the RPI-CM4 module, using the BPI-CM4IO baseboard, but should support any CM4 compatible baseboards. https://wiki.banana-pi.org/Banana_Pi_BPI-CM4 The Linux DT changes has been submitted (https://lore.kernel.org/all/20230303-topic-amlogic-upstream-bpi-cm4-v2-0-2ecfde76fc4d@linaro.org/) and merged (https://git.kernel.org/amlogic/c/0262f2736978b1763363224698f47112a148dab0) upstream, the U-Boot changes are still in review (https://lore.kernel.org/all/20230307-u-boot-cm4-v1-0-43f5a393cd37@linaro.org/) How Has This Been Tested? Full testing must be done before switching this PR out of …

Description emmc and sdio clock registers on rk322x were not exactly properly configured in kernel source code, causing the clock to be not precisely aligned. This was particularly evident during initial detection of emmc and sdio devices and also was clashing with a recent addition to mainline kernel (this commit) This PR corrects the kernel code in current and edge branches (6.1 and 6.2) to fix the thing and possibly increase compatibility, going from this: [ 2.194866] mmc_host mmc2: card is non-removable. [ 2.206312] mmc_host mmc2: Bus speed (slot 0) = 2343750Hz (slot req 400000Hz, actual 390625HZ div = 3) [ 2.385689] mmc_host mmc2: Bus speed (slot 0) = 5000…

Description Yes, we have documented the maintainers in armbian/documentation. But it seem like that some of them don't maintain anymore. Use a separated repos make us forget to update it. So let's document here. What's more, defining this make us easier to update .github/CODEOWNERS The way to find out the BOARD_MAINTAINER has documented in the commit messages. The script to do this #!/bin/bash SRC="$(realpath "${BASH_SOURCE%/*}/../")" readarray -t members < <(curl -L -H "Accept: application/vnd.github+json" -H "Authorization: Bearer ${TOKEN}" "https://api.github.com/orgs/armbian/members?per_page=100" | jq -r .[].login) doc="$(curl -L https://github.com/armbi…

Description Fix boot from btrfs fs in uboot 2024.01/2024.04 How Has This Been Tested? [x] Compile image and boot from (zstd-compressed) btrfs sole rootfs/bootfs partition Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code View the full article

Description This backports a patch to linux-next for driver support for hdmirx for rk3588 boards How Has This Been Tested? Compiled and tested on Orange Pi 5 plus Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Welcome to this week’s Armbian Build Highlights! We’ve added support for the Qcom Robotics RB5 and delivered a stack of board-level fixes and improvements. Bootloaders are getting version upgrades, new device tree tweaks are live, and key driver updates are in. Whether you’re tuning SPI displays or tweaking governors, there’s something here for every dev. Let’s dive in! New Board Support Qcom Robotics RB5 Support Added View Commit » by FantasyGmm Board-Level Fixes & Enhancements sakurapi-rk3308b Fix UART4 Bluetooth HCI + enable I2C1 View » WS2812 SPI driver overlay for onboard LEDs View » DTS update: SPI display match fix + spidev enabled View » rk3308…

KingNovy has introduced a small fanless firewall appliance powered by an Intel Celeron J4125 Gemini Lake Refresh processor, equipped with six 2.5GbE ports through Intel i225-V Rev 3 Ethernet controllers, and selling for as low as $230 for the barebone model. The system supports up to 32GB RAM, mSATA and 2.5-inch SATA storage, features HDMI output and four USB 3.0/2.0 ports, plus an RJ45 console port, and is said to work with pfSense 2.5.x, OPNsense 22.1, OpenWrt, ROS7, ESXI, Proxmox, CentOS, and more. Specifications: SoC – Intel Celeron J4125 quad-core Gemini Lake Refresh processor @ 2.0 / 2.7 GHz (Turbo) / 2.4 GHz (Turbo all cores) with Intel UHD Graphics 600 @ 250/750 M…

Texas Instruments has just launched the new Sitara AM62 family with AM623 and AM625 single to quad-core Cortex-A53 processors designed to provide IoT gateways and HMI applications with AI processing at low power, in some cases with up to 50% reduction in power consumption. The AM623 processor specifically targets Internet of Things (IoT) applications and gateways that may benefit from object and gesture recognition, while the AM625, equipped with a 3D GPU, should power HMI applications with edge AI and up to two full-HD displays. Sitara AM623 and AM625 processors Sitara AM623/AM625 key features and specifications: CPU – Single, dual, or quad-core Arm Cortex-A53 processor …

The recent improvements in Monado like out of process compositing and multi-layer rendering released with v0.2 prepared the requirements to implement OpenXR's XR_EXTX_overlay extension. View the full article

When it comes to buffer sharing synchronization in the kernel there are two ways of doing it: Implicit Fencing and Explicit Fencing. The difference between them relies on the fact that the kernel may or may not share synchronization information with userspace, it will either be implicit, with no fencing information provided, or explicit with all information available to userspace. View the full article

Description Bugfix Jira reference number AR-1348 How Has This Been Tested? [x] Build test Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Fix mic for rt5651 asound.state, the origin state don't open mic route . I did test use Nanopct4, same should fixed use rt5651 codecs's board How Has This Been Tested? [x] I heared sound from Nanopct4 onboard mic record wav file Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description This patch breaks Bluetooth. Before patch disable: root@rockpi-4b:~# dmesg | grep -E 'brcm|Blue|ieee' [ 8.488266] Bluetooth: Core ver 2.22 [ 8.488355] Bluetooth: HCI device and connection manager initialized [ 8.488367] Bluetooth: HCI socket layer initialized [ 8.488372] Bluetooth: L2CAP socket layer initialized [ 8.488385] Bluetooth: SCO socket layer initialized [ 8.594739] Bluetooth: HCI UART driver ver 2.3 [ 8.594761] Bluetooth: HCI UART protocol H4 registered [ 8.594766] Bluetooth: HCI UART protocol BCSP registered [ 8.594868] Bluetooth: HCI UART protocol LL registered [ 8.594875] Bluetooth: HCI UART protocol ATH3K registere…

Fix description. Remove trailing spaces and extra line feed to improve parser compatibility. No functional changes. Add space before bracket in code. Jira reference number AR-1480 [x] bullseye tested on orangepi-r1-plus-lts Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Nordic Semi nRF7002 DK is an IoT development kit based on the nRF5340 dual-core Cortex-M33 multi-protocol wireless SoC and nRF7002 companion chip adding low-power dual-band (2.4GHz and 5.0 GHz) WiFi 6 connectivity. When Nordic Semi introduced the nRF7200 dual-band WiFi 6 companion chip for nRF52840 and nRF5340 wireless SoCs and nRF9160 cellular IoT SiP last summer, the “nRF7002-PDK” development kit was only mentioned in passing with a 3D render and not much else. The company has now announced the availability of the nRF7002 DK to help developers create low-power Wi-Fi 6 IoT applications. nRF7002 DK specifications: Wireless MCU – Nordic Semi nRF5340 dual-core Arm Cortex-M3…

PlanetPC XR1/XR2 are Arm Linux mini PCs based on Rockchip RK3568 or RK3588 processor respectively with a unique design featuring an integrated touchscreen display for control. Planet Computers has designed several unique computing devices over the years such as the Cosmo Communicator 2-in-1 smartphone and computer or Astro Slide 5G transformer smartphone, and the British company has now come up with a mini PC preloaded with Ubuntu with a touchscreen screen interface, dual 4K/8K video output, dual Gigabit Ethernet and more. PlanetPC XR1/XR2 specifications: SoC PlanetPC XR1 – Rockchip RK3568 quad-core Cortex-A55 processor up to 2.0 GHz with Arm Mali-G52 2EE, 0.8 TOPS NPU P…

Spring is in bloom in the northern hemisphere, and with it comes three tech events we'll be attending - PyCon US, Shell & Display Next Hackfest, and Linaro Connect! View the full article

Description legacy - 5.15.126 -> 5.15.127 current - 6.1.45 -> 6.1.46 edge - 6.4.10 -> 6.4.11 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Booted legacy, current and edge images on Orange Pi Prime (sun50i H5) [X] Booted legacy, current and edge images on NanoPi Duo2 (sun8i H3) Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate …

Description As per tittle. How Has This Been Tested? [ ] Build test, will run smoke tests right after too. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description armbian.list generated two times on every build: when==image-early and when==image-late If when==image-early armbian.list renamed to armbian.list.disabled and this file goes to image. https://github.com/armbian/build/issues/6086 Jira reference number AR-2007 How Has This Been Tested? [X] Rebuild image, armbian.list.disabled disappears Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any dependent changes have been m…

main-config.sh: workaround: set the default ARCH to arm64 (replacing armhf) main-config.sh: workaround: set the default ARCH to arm64 (replacing armhf) armhf was disabled for some releases and now we get spurious failures building certain artifacts (firmware) Signed-off-by: Ricardo Pardini ricardo@pardini.net View the full article

Description armbian-bsp-cli: fix 10-wifi-disable-powermanagement.rules corrected "iw" path made rule better targeted at wifi devices switched from %k (kernel) to $name variable to better integrate with user-provided rules How Has This Been Tested? [x] Tested new rule with actual wifi devices --> udeavdm test /sys/class/net/wlan0 output: Queued commands: RUN{program} : /usr/sbin/iw dev wlan0 set power_save off Checklist: [x] My code follows the style guidelines of this project [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings View the full article

This week's work centers on board portfolio expansion, kernel and U-Boot version bumps, and CI and infrastructure hardening across the build and documentation pipelines. Board support saw notable growth with the introduction of the SpacemiT K3 Pico-ITX and Luckfox Nova (RK3308B), alongside a new generic uefi-arm64-dt family and board intended to standardize UEFI device-tree targets. Qualcomm enablement advanced through Radxa Dragon Q6A and Q8B work, including UFS provisioning for Kodiak, EDL-based UFS flashing in the imager, and audioreach topology firmware for sc8280xp. Catalog assets were extended for the MaaXBoard 8ULP, Mellow Fly C5, Xiaomi Sheng, and the new Radxa an…

Next week we'll be in Santa Fe, Argentina, for DebConf 2026! Catch our 2 talks covering the latest Apertis developments and toolkits in Debian. View the full article

Add gcc-aarch64-linux-gnu into dockerfile to make possible build in docker without external toolkit on x64 builder View the full article

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how. View the full article

Collabora will be exhibiting at IBC 2016, the premier annual event for professionals engaged in the creation, management and delivery of entertainment and news content worldwide. View the full article

Bumps ossf/scorecard-action from 2.0.4 to 2.0.6. Release notes Sourced from ossf/scorecard-action's releases. v2.0.6 What's Changed Fix - Broken dockerfile by @​naveensrinivasan in ossf/scorecard-action#979 Full Changelog: https://github.com/ossf/scorecard-action/compare/v2.0.5...v2.0.6 v2.0.5 What's Changed Remove trailing space from example by @​jamacku in ossf/scorecard-action#955 :seedling: Bump actions/cache from 3.0.8 to 3.0.10 by @​dependabot in ossf/scorecard-action#956 :seedling: Bump github/codeql-action from 2.1.25 to 2.1.26 by @​dependabot in ossf/scorecard-action#957 :seedling: Bump step-security/harden-runner from 1.4.5 to 1.5.0 by @​dependabot in os…

LILYGO T-TWR is an ESP32-S3 development board fitted with an SA868 Walkie-Talkie module and a UHF or VHF antenna, a speaker, a microphone, a small 0.96-inch OLED, and a 18650 battery holder, plus some I/Os for expansion. Equipped with an ESP32-S3-WROOM-1-16NR8 module, the T-TWR offers WiFi 4 and Bluetooth 5.0 connectivity, a dual-core processor with 16MB flash and 8MB PSRAM, and enables users to design their own Walkie-Talkie, while its expansion capabilities allow the control of devices. LILYGO T-TWR specifications: Wireless module – Espressif ESP32-S3-WROOM-1-N16R8 module with ESP32-S3 dual-core LX7 microprocessor @ up to 240 MHz with Vector extension for machine learni…

FriendlyElec has come up with a low-cost version of the NanoPi R6S with the NanoPi R6C router/SBC based on the same Rockchip RK3588S octa-core Cortex-A76/A55 processor but offering just one Gigabit Ethernet port and one 2.5GbE port, and adding an M.2 NVMe SSD socket for storage. The NanoPi R6C is also offered with 4GB or 8GB RAM, an optional 32GB eMMC flash soldered on the board, a Micro SD card socket, an 8K capable HDMI 2.1, USB 3.0 and USB 2.0 ports, and a few extra features we’ll discuss further below. NanoPi R6C specifications: SoC – Rockchip RK3588S octa-core processor with: CPU – 4x Cortex-A76 cores @ up to 2.4 GHz, four Cortex-A55 cores @ 1.8 GHz GPU – Arm Mali-G6…

Description I change both edge and current. vdd-log supply is pwm-supply, not vin-supply. Fixes vdd-log supply ending up the dummy regulator. [ 1.783479] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ 1.783505] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ 1.783556] vdd_log: supplied by regulator-dummy Per https://lore.kernel.org/all/20211227234529.1970281-2-heiko@sntech.de/ there will be no functional change as the supplying regulator is an always-on fixed-regulator. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test co…

Previously I reviewed Beelink’s SER6 Pro mini PC when it was released with an AMD Ryzen 7 6800H processor, mentioning that a ‘refreshed’ model had since been released. Beelink have kindly sent me this updated model which now uses an AMD Ryzen 7 7735HS. Given this is virtually an identical processor with just a 50 MHz improvement to the boost frequency, this review will look at confirming that the Windows performance is just as good as before and also revisiting the issues faced previously with the USB4 port. Spoiler alert: the USB4 now works perfectly! Beelink SER6 Pro 7735S specification Beelink list the SER6 Pro 7735HS specifications as: with the only differences to the…

odroidn2l: add board file for ODROID N2L; on meson64 edge; add N2L-specific FIP handling to g12b odroidn2l: add board file for ODROID N2L; on meson64 edge; add N2L-specific FIP handling to g12b current (6.1) does not yet carry the DTB u-boot (up to at least 2023.10-rc2) does NOT have ADC detection for N2L, so force the DTB meson-g12b.conf: add a specific if for odroidn2l before the odroidn2* for FIP blobs View the full article

Welcome to the latest Armbian Newsletter: your source for the latest developments, community highlights, and behind-the-scenes updates from the world of open-source ARM and RISC-V computing. This week: the desktop installer in armbian-config has been rebuilt from the ground up tiered installs, clean uninstalls, and snap-free native browsers across all architectures. Armbian Imager 2.0 is out, rewritten interface and flashing engine, with boards that boot already configured (username, Wi-Fi, timezone) and byte-for-byte write verification. And the NanoPi M5 becomes the first RK3576 board to boot end-to-end from UFS on mainline U-Boot, with no proprietary image in the loop. …

No descriptionView the full article

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems. View the full article

Developing Linux for Android on Qemu allows you to do some things that are not necessarily possible using the stock emulator. For my purposes I need access to a GPU and be able to modify the driver, which is where Virgilrenderer and Qemu comes in handy. View the full article

congatec has just introduced the conga-HPC/uATX micro-ATX carrier board designed for COM-HPC Client modules size A, B, and C. The board is vendor independent since it is based on the COM-HPC and micro-ATX standards and designed for embedded long-term availability of at least seven years. That means the micro-ATX carrier board works congatec solutions such as the high-end conga-HPC/cALS COM-HPC Client Size C module with up to a 16-core Intel Core i9 Alder Lake-S processor or the more power-efficient conga-HPC/cALP COM-HPC Client Size A modules with Intel Celeron 7305E processor, as well as similar solutions from ADLINK Technology, Advantech, Portwell, and other vendors. co…

Add Firefly Station M3 Tested, work all equipment View the full article

ARES-500AI is another embedded box PC from AAEON, but instead of the usual Intel or NVIDIA Jetson accelerators, it integrates a Huawei Atlas 200 AI accelerator module based on the Ascent 310 chip delivering up to 22 TOPS of AI performance, and is designed for the Chinese market. The Linux computer supports up to 8GB RAM, SSD and MicroSD storage, and is equipped with four Gigabit Ethernet ports, some USB 3.0 ports, but somehow no video output port. Designed for industrial computer vision applications, the system supports a wide 9V to 36V power input, ARES-500AI Specifications: AI module – Huawei Atlas 200 based on Ascend 310 with 22/16/8 TOPS INT8, 11/8/4 TFLOPS FP1…

fix create efi parted for arm View the full article

GL.iNet Beryl AX (GL-MT3000) is a pocket-sized Wi-Fi 6 router running OpenWrt on a MediaTek MT7981B (Filogic 820) dual-core processor @ 1.3 GHz and equipped with a 2.5GbE port, a Gigabit Ethernet port, and a USB 3.0 port. The hardware is basically the same as the Brume 2 (GL-MT2500A) security gateway, except it adds support for WiFi 6 connectivity and as an AX3000 router more than doubles the bandwidth compared to the earlier Beryl (GL-MT1300) AC1300 router. The company has sent me a sample so I’ll start the two-part review by checking the specifications, doing an unboxing, and tearing it down to have a closer look at the hardware design, before trying out OpenWrt and tes…

ICOP QEC-M-01 is an EtherCAT master system running FreeDOS based on DM&P Vortex86EX2 dual-core x86 processor. It is programmable with an industrial Arduino IDE – the 86Duino IDE – that supports an EtherCAT API for real-time field monitoring and big data collection. The system can be used for industrial automation applications that require precise timing and it can monitor the hardware’s voltage, current, and temperature to calculate/estimate carbon emissions for industrial manufacturing to assist in the tracking of a factory’s carbon footprint. ICOP QEC-M-01 specifications: SoC – DM&P Vortex86EX2 dual-core processor with the Master core clocked up to 600MHz and th…

rockchip64_common: refactor: extract BOOT_SPI_RKSPI_LOADER=yes into rock-3a, rock-5b, and orangepi5 no more such rockchip-rk3588 references in common code View the full article

Description Update odroidxu4-current kernel to 5.4.241 How Has This Been Tested? [x] Reboot of my Odroid HC1 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Mainline updated the opp table handles to match the schema, this broke the overlays. https://github.com/torvalds/linux/commit/a30f3d90e2d2f4d0452c0f6f77693d0e9bba3b1e Overlays updated with corrected handle names. reported-by: @neofeo How Has This Been Tested? rk3399 successful application of overlays Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream m…

bsp-cli: allow hooks to cleanly add code to the bsp-cli postinst; fix helios4 to match bsp-cli: allow hooks to cleanly add code to the bsp-cli postinst; fix helios4 to match bsp-cli: postinst is now generated after the hooks are run hooks are allowed to append to postinst_functions array hooks are not allowed to modify DEBIAN/postinst directly anymore (it won't even be there) rewrite the postinst stuff in helios4's family_tweaks_bsp() to use new way introduce add_file_from_stdin_to_bsp_destination(), a helper for easy heredoc-based adding of files to bsp-cli First and only argument is the destination path, relative to the root of the package -- do NOT include $desti…

Description Enabled CONFIG_RCU_TRACE as a workaround to fix booting 6.1.64 kernel on 32-bit allwinner boards. Edge kernel is not having this issue and hence workaround was not added for the same. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Booted on Orange Pi Zero (sun8i H3) Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warn…

bcm2711: don't force SKIP_ARMBIAN_REPO=no; include bootloader fw in bsp-cli if set to yes bcm2711: don't force SKIP_ARMBIAN_REPO=no; include bootloader fw in bsp-cli if set to yes do not force SKIP_ARMBIAN_REPO=no anymore instead, if SKIP_ARMBIAN_REPO=yes: include the bootloader "fw" in bsp package, from Debian's raspi-firmware git source add Debian/Ubuntu-specific packages for Wifi/BT firmware For Ubuntu, include raspi-eeprom and raspi-config too (not available on Debian) tested on rpi4b (bookworm/mantic) - untested on rpi5b (I don't have/want one) View the full article

Recently, both Weston 14.0, and 14.0.1 (bug fix) were released. Here's at look at some of the highlights and changes for this latest release of Wayland's reference compositor. View the full article

This week in Armbian development saw significant enhancements across multiple areas, including expanded board support and improved hardware compatibility. Notable additions include new images and configurations for Qidi X-6, X-7, and Ariaboard Photonicat2 mainboards, as well as refined kernel patch maintenance and updates for various platforms. The build system received important fixes, such as resolving compilation errors and device tree issues, alongside improvements in Docker utilities and offline mode detection. Several refactoring efforts streamlined backend processes and enhanced user interface elements. The team also introduced automatic fallback mechanisms for Het…

This week's work centers on board portfolio expansion, kernel and U-Boot version bumps, and CI and infrastructure hardening across the build and documentation pipelines. Board support saw notable growth with the introduction of the SpacemiT K3 Pico-ITX and Luckfox Nova (RK3308B), alongside a new generic uefi-arm64-dt family and board intended to standardize UEFI device-tree targets. Qualcomm enablement advanced through Radxa Dragon Q6A and Q8B work, including UFS provisioning for Kodiak, EDL-based UFS flashing in the imager, and audioreach topology firmware for sc8280xp. Catalog assets were extended for the MaaXBoard 8ULP, Mellow Fly C5, Xiaomi Sheng, and the new Radxa an…

This cycle centers on Linux 7.2/7.3 kernel enablement across out-of-tree drivers, new board support and platform fixes across Rockchip, SpacemiT, and Amlogic, and a broad documentation and CI cleanup. Kernel progression dominated the driver ecosystem, with 7.3 patch sets prepared for rockchip64, meson64, and the UEFI targets, and edge bumps to 7.2.3 landing for qcs6490, qrb2210, and sc8280xp. A wave of Wi‑Fi drivers was re-enabled and bumped for 7.3 compatibility, including rtl8189es/fs, rtl8192eu, rtl8723ds, rtl8852bs, uwe5622, and bcmdhd-dkms, most addressing the strncpy removal and the cfg80211 remain_on_channel cookie signature change. The rk35xx vendor kernel also ad…

Description Add hint about .csc meaning View the full article

Collabora will be presenting on five separate occasions during the virtual editions of Embedded Linux Conference North America and Open Source Summit North America, taking place later this month. View the full article