SBC News

Debian moved the non-free firmware into it's own sub-repository since bookworm View the full article

Until now, I had only heard about Beken Bluetooth audio chips, but I’ve just been informed the company is also making WiFi chips such as the BK7256 that are notably found in some Tuya Smart Home modules. Beken offers both RISC-V and Arm WiFi and Bluetooth chips with features summarized as follows: BK7235 single-core RISC-V MCU up to 320 MHz with 2.4 GHz WiFi 6 802.11ax and Bluetooth 5.2 LE, 4MB flash, 512KB SRAM, optional 4MB PSRAM BK7236 dual-core Arm MCU up to 120 to 240 MHh with 2.4 GHz WiFi 6 802.11ax and Bluetooth 5.3 dual mode, 4MB flash, 512KB SRAM, optional 4MB PSRAM BK7237 dual-core RISC-V MCU up to 320 MHz with 2.4 GHz WiFi 6 802.11ax and Bluetooth 5.2 dual mode…

Per PR#4697 this was enabled first on meson64-edge to test. I am now following up to enable on meson64-current. I know that this should have been in before the freeze yesterday for 23-02. I hope it can be included, but understand if it needs to wait. Changes to be committed: modified: config/kernel/linux-meson64-current.config Description Jira reference number [AR-9999] (I don't seem to have jira access to log this) How Has This Been Tested? [x] Built and installed meson64-current on a box to verify it builds/runs View the full article

Eduponics Mini v2.0 is a Smart Agriculture IoT kit based on the ESP32 wireless microcontroller with built-in sensors to measure temperature, humidity, barometric pressure, and ambient light, and interfaces to connect water level and soil moisture sensors. The new board builds upon the Eduponics Mini introduced two years ago, but based on the 8MB flash version of the ESP32-WROVER-B module, a different mix of sensors, a BM8563 RTC module replacing the DS1307 RTC chip, and the addition of Grove connectors for external sensors from companies such Elecrow. Eduponics Mini v2.0 specifications with highlights in bold or strikethrough showing the differences with the first revisio…

Add TV Box targets to stable builds per discussion at the 23/01/18 Developers Meeting. Added aml-s9xx-box and rk3318-box (rk322x-box was already there) Changes to be committed: modified: config/targets.conf View the full article

ECS LIVA Q3H is a pocket-sized mini PC with a Jasper Lake mini PC and the company says it is especially suited to video conferencing applications thanks to HDMI output and input ports enabling users to connect it with a guest PC and easily add it to a meeting. The mini PC is equipped with an Intel Pentium Silver N6000, Celeron N5100, or Celeron N4500 processor, comes with up to 4GB RAM and 128GB storage, supports Ethernet and WiFi 5 networking and offers a few USB 3.2/2.0 ports for peripheral expansion. LIVA Q3H mini PC specifications: Jasper Lake SoC (one or the other) Intel Celeron N4500 dual-core processor @ 1.1GHz / 2.8GHz (Burst frequency) with Intel UHD graphics; 6W…

Over the course of the last decade, Rust has emerged as a new programming language for writing safe low-level code. This blog post is the first in a series exploring the area of using Rust to write Mesa Vulkan drivers. View the full article

FOSSBot is an “open design” 3D printed educational robot comprised of a Raspberry Pi SBC and various off-the-shelf modules, as well as open-source software that can be used for education purposes. The FOSSBot DIY robot has been developed by the Harokopio University of Athens and the Greek Free and Open Source Software (GFOSS) community, and builds upon the “GSOC 2019 – A DIY robot kit for educators” with the main goal being to have a platform to “familiarize teachers with modern education models based on the S.T.E.A.M approach. (Science, Technology, Engineering, Arts, Mathematics)”. FOSSbot key components: SBC – Raspberry Pi Zero W, Raspberry Pi 3, or Raspberry Pi 4. Mech…

Description Fix broken patches How Has This Been Tested? [X] Build [X] Burn to device and boot Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Latronics has just unveiled two new System-in-Packages (SiP) with the entry-level Open-Q 2290CS SIP based on Qualcomm QCS2290 quad-core Cortex-A53 processor designed for industrial IoT applications and safety vehicle equipment control, and the pin-compatible, mid-range Open-Q 4290CS SIP based on Qualcomm QCS4290 octa-core Kryo 260 CPU for applications requiring artificial intelligence and machine learning capabilities. The Open-Q 2290CS module comes with 2GB LPDDR4, 16GB eMMC flash, WiFi 5 and Bluetooth 5.0 connectivity, while the Open-Q 4290CS module is equipped with up to 6GB LPDDR4, up to 256GB eMMC flash., and Wi-Fi 5 with some Wi-Fi 6 features (TWT & 8SS), and Bl…

Description Rockchip has released legacy kernel 5.10 supporting rk3568, and friendlyarm has been using it on nanopi5: https://github.com/friendlyarm/kernel-rockchip/tree/nanopi5-v5.10.y_opt/. I did tried the legacy kernel that rk3588 uses on rk3568 board but failed to boot with pcie devices. So although this friendlyarm kernel is mostly the same as the legacy kernel rk3588 uses, it is still the best supported 5.10 kernel for rk3568. Since we have patch board-rock3a-Add-DT-link-for-backward-compatibility.patch, we can use the default device tree file rockchip/rk3568-rock-3a.dtb same as the edge kernel. Device tree file is from radxa's legacy 4.19 kernel repo modified wit…

No descriptionView the full article

See ./lib/functions/rootfs/distro-specific.sh View the full article

To follow the naming convention used in the docs View the full article

Because people often do CTRL+C and CTRL+V without thinking View the full article

Description Bug reporting form needs to be extended with a question: How to reproduce? View the full article

XGO 2 is a desktop robot dog using the Raspberry Pi CM4 as its brain, the ESP32 as the motor controller for the four legs and an additional robotic arm that allows the quadruped robot to grab objects. An evolution of the XGO mini robot dog with a Kendryte K210 RISC-V AI processor, the XGO 2 robot offers 12 degrees of freedom and the more powerful Raspberry CM4 model enables faster AI edge computing applications, as well as features such as omnidirectional movement, six-dimensional posture control, posture stability, and multiple motion gaits. The XGO 2 robot dog is offered in two variants – the XGO-Lite 2 and the XGO-Mini 2 – with the following key features and specificat…

Description U-boot 22.07 is borked on many allwinner devices. Jira reference number AR-1528 How Has This Been Tested? [x] Build test [ ] Test on hardware Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Disables the use of the obiabf repository by default. Using these packages by default regularly causes problems. The background does not work, the DE does not start, etc. testing has shown that the current version of mesa works fine and does not create problems with all DE. Users who need this experimental version can enable and use it themselves. View the full article

This does not affect the downloaded ready-made ROOTFS, but the new compression value dramatically increased the process time (2-4 times) for user configurations. Adding a variable indicating the compression ratio will make it easy to select the desired value according to the conditions of use of the assembly system. By default, the previous value is set, for a mass build (which is executed from command scripts), it is easy to add any value of the maintainer's choice and will allow you to maintain a high build speed for custom versions that are usually executed on conventional ARM devices with low performance. View the full article

add board quartz64b Tested station m1\p1\m2\p2\m3 quartz64a\b bananapir2pro jetson nano View the full article

Description We download some newer gcc but we didn't use it. Since buster is eos, #2403 isn't a issue now. So let use newer gcc. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Build arm [X] Build aarch64 Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstre…

Description These two blob files have been in repo armbian/rkbin for a long time: armbian/rkbin#8. I test them on rock-3a today. Should be okay to update. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Tested on rock-3a Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and publish…

Add sys-triggered LED's, fix LAN LEDS, and improve Debian dual network function. Take generation of file "70-rename-lan.rules" and add a Debian dual NIC work-around. This makes the file board specific, so move this functionality from a multi-board if statement in "rockchip64_common.inc" into the same hook as the LED configuration in the board config "orangepi-r1plus-lts.conf" Rework LED functionality to support sys-triggered LED configuration in the device tree. Apply the device tree patch to all versions from 5.15 to 6.1 Jira reference number AR-1509 Testing: Testing was done on an orangepi-r1plus-lts board. [x] Bullseye current. [x] Jammy current. [x] Bullseye edge…

You’ve probably seen a few plant watering projects based on Arduino over the years, and now the company has decided to launch its own Arduino Plant Watering Kit based on the Arduino Nano RP2040 Connect board and everything you need to get started to water your indoor plants. Arduino Plant Watering Kit content: Arduino Nano RP2040 Connect board (ABX00053) with Raspberry Pi RP2040 MCU, ESP32 module for WiFi, and Bluetooth LE connectivity. Arduino Nano Screw Terminal Adapter (ASX00037) Open-ended USB cable with on/off switch 5V submersible pump 1-meter of plastic hose Grove moisture sensor Grove relay module with cable Grove LED button module with cable Grove cables 50 cm 10…

Winlink E850-96Board is a 96Boards CE Extended-compliant single board computer (SBC) based on a Samsung Exynos 850 octa-core Cortex-A55 processor plus 64GB flash and 4GB RAM found in a single eMCP (embedded Multi-Chip Package) chip. While the Samsung Exynos 5422 based ODROID-XU4/XU4Q was one of the most popular SBCs when it launched in 2015 thanks to its features set and affordable pricing, we haven’t really seen other interesting Samsung Exynos SBCs in recent years. I did notice a Winlink E850-96Board based on Exynos 850 in the Linux 5.17 release last March, but there was not enough information then. The good news is that the board has now launched so let’s have a closer…

RK3328 UART1 and I2C0 are available on Orange Pi R1 Plus LTS 13 pin connector. Add device tree overlay files for rk3328 uart1 and i2c0. I have noticed chatter on Github (@rpardini) around dtbo naming conventions. I'm therefore not absolutely clear on what is expected. Historic dtbo's for rk33xx are formatted with a rockchip prefix (there are some exceptions). I've used the rockchip prefix: rockchip-rk3328-i2c0.dtbo rockchip-rk3328-uart1.dtbo And the "Hardware" selection in armbian-config displays them correctly without the prefix. Jira reference number AR-1509 [x] Builds correctly and produces the dtbo's [x] Tested that the "Hardware" can be selected via armbian-…

Description https://github.com/armbian/build/pull/4759#issuecomment-1407809336 How Has This Been Tested? [x] Compiled the kernel succesfully Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Hotfix for rk3328 dram memory controller driver has some issues and causes crashes on board on which is activated (see https://github.com/armbian/build/pull/4767) on edge 6.1 kernel. This pull request fixes the issue, plus removes some cruft and warnings from the existing code. How Has This Been Tested? [x] Compile kernel deb packages successfully [x] Install on a rk3318 system [ ] Install on rk3328 system Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My…

Description Hardware cursor is currently broken and sometimes it's randomly disappearing. Ref: https://github.com/radxa/kernel/issues/57 How Has This Been Tested? [ ] Compiled and checked that cursor is no longer disappearing. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Hotfix to remove a hunk from a patch that prevented compilation of uwe5622 driver on sunxi64 family for current kernel 5.15. The hunk was just "cosmetical" because it removed a compilation warning about unused variables. There seems to be some #define and #ifdef difference on sunxi64 that causes the compilation error. Also the application of bluetooth-fix patch has been removed from drivers_network.sh since the patch has been removed in the past. How Has This Been Tested? [x] Compiled current 5.15 kernel debs for OrangePi 3 LTS (sunxi64) [x] Compiled current 5.15 kernel debs for OrangePi 4 LTS (rockchip64) [x] Compiled edge 6.1 kernel debs for OrangePi4 LTS…

STMicroelectronics has just announced the STM32Cube.AI Developer Cloud opening access to a suite of online AI development tools for the STM32 microcontrollers (MCUs) allowing developers to generate, optimize, and benchmark AI working on the company’s 32-bit Arm microcontrollers. The company sus the STM32Cube.AI Developer Cloud is based on the existing STM32Cube.AI ecosystem of desktop tools with the added benefit of being able to remotely benchmark models on STM32 hardware through the cloud in order to save on workload and cost. Some of the highlights of the online tools include: An online interface to generate optimized C-code for STM32 microcontrollers without requiring…

The Green Metrics Tool (GMT) is an open-source framework that allows the measurement, comparison, and optimization of the energy consumption of software with the goal of empowering both software engineers and users to make educated decisions about libraries, code snippets, and software in order to save energy along with carbon emissions. While the firmware of battery-powered embedded devices and the OS running on your smartphone are typically optimized for low power consumption in order to extend the battery life, the same can not be said of most software running on SBCs, desktop computers, and servers. But there are still benefits of having power-optimized programs on th…

Description legacy was broken. Let's drop it since current and edge work well. How Has This Been Tested? Unnecessary. Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

MicroBlocks is a visual programming IDE for 32-bit microcontrollers currently supporting the BBC Micro:bit V1/V2, Calliope mini (aka the German Micro:bit), Adafruit Circuit Playground Express and Bluefruit, Raspberry Pi Pico and Pico W, and various other boards including ESP32 and ESP8266-based boards. I discovered MicroBlocks in the list of talks for FOSDEM 2023, and although it did not make it to my virtual schedule, I thought it was interesting to look into and write about it. In their upcoming FOSDEM talk, Bernat Romagosa and Kathy Giori refer to MicroBlocks as small, fast, and human-friendly with development guided by four guiding principles: liveness, parallelism, p…

Description Remove patches, sync with driver repository. https://github.com/jethome-ru/rtl88x2cs/pull/8 Jira reference number AR-1527 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] JetHub D1+ (rtl8822cs WiFi/BT) Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in …

After two years of taking place exclusively online, FOSDEM 2023 is back in Brussels, Belgium with thousands expected to attend the 2023 version of the “Free and Open Source Developers’ European Meeting” both onsite and online. FOSDEM 2023 will take place on February 4-5 with 776 speakers, 762 events, and 63 tracks. As usual, I’ve made my own little virtual schedule below mostly with sessions from the Embedded, Mobile and Automotive devroom, but also other devrooms including “Open Media”, “FOSS Educational Programming Languages devroom”, “RISC-V”, and others. FOSDEM Day 1 – Saturday February 4, 2023 10:30 – 10:55 – GStreamer State of the Union 2023 by Olivier Crête GStream…

Description RK3328 dmc driver was added a few kernels ago, it is broken with 6.1 causing kernel panic and failure to boot. Remove driver, disable boards that still depend on it but can't be tested. Patches need rebased for nanopi r2 (all) rk3328-roc-pc nanopi neo3 orangepi R1 How Has This Been Tested? [X] Build passes [X] Renegade boots successfully Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any dependent changes have be…

Description The uwe5622 driver has been moved from allwinner directories into patch/misc directory with this previous pull request With this pull request, rockchip64 family will share the base patch in misc and provides an additional, small patch to fix specific compatibility for rockchip. Ideally this minor patch would be integrated in the big driver in patch/misc, but it is not trivial task and would then require extensive tests on allwinner platform. The pull request also provides a patch to the driver to let it compile and work on kernel v6.1, and also patches the rockchip64-edge kernel config. At last, it fixes a memcpy fat kernel warning about field-spanning memo…

In the first part of the review of GL.iNet GL-MT3000 “Beryl AX” pocket-size WiFi 6 OpenWrt router we had a look at the specifications, the package content, and the hardware design with a teardown of the little. I’ve now had more time to play with the router focusing the review on WiFi 6 performance, and some of its functions such as repeater, NAS, and 4G hotspot. The router also supports VPN client and server modes, the Tor network, and Adguard Home, but I’ll invite readers to check out the GL.iNet Brume 2 security gateway review since I went through all these, and the hardware is very similar minus wireless connectivity. Initial setup of the Beryl AX router If you connec…

Description update renegade device tree patches How Has This Been Tested? build passes Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description USB3 has been enabled in mainline since 2021 View the full article

Description These patches are are needed for panfork "go-faster". Using env PAN_MESA_DEBUG=gofaster we can get better glmark performance. Here are some infos from icecream95 copied on discord: "go-faster" patches for Mesa on RK3588 are almost ready, but need some kernel patches to get the full advantage: https://gitlab.com/panfork/rk3588-implicit-sync That repo has backports of a couple of patches from Linux v6.0, a fix to rockchip-drm, and also a patch to kbase fixing a bug that I hit accidentally… but could probably be used in an exploit. On that note, kbase vulnerabilities are found quite often: https://developer.arm.com/Arm Security Center/Mali GPU Driver Vulnerabi…

Nicla Voice is the latest board from the Arduino PRO family with support for always-on speech recognition thanks to the Syntiant NDP120 “Neural Decision Processor” with a neural network accelerator, a HiFi 3 audio DSP, and a Cortex-M0+ microcontroller core, and the board also includes a Nordic Semi nRF52832 MCU for Bluetooth LE connectivity. Arduino previously launched the Nicla Sense with Bosch SensorTech’s motion and environmental sensors, followed by the Nicla Vision for machine vision applications, and now the company is adding audio and voice support for TinyML and IoT applications with the Nicla Voice. Nicla Voice specifications: Microprocessor – Syntiant NDP120 Neu…

Description Cracklib check library must be present in minimal variant. Re-adding after recent too intensive packages cleanup. Jira reference number AR-1524 How Has This Been Tested? [x] Generated Debian boolseye minimal Checklist: [x] My code follows the style guidelines of this project [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Needs firmware for ap6275p -> https://github.com/armbian/firmware/pull/47 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Previously known for its tablet SoCs, Allwinner has been focusing on low-cost Cortex-A7 and Cortex-A53 processors for consumer devices in recent years, and the Allwinner TV303 quad-core Cortex-A53 processor is yet another one and appears to be the first of Allwinner TV-series processors designed for “smart screens”, notably smart Android projectors. I could not find any references for TV303 on the Allwinner website, but the company did publish a post on Weixin about a “Smart Android Projector” by Hotack based on the new processor and showcased at CES 2023. Allwinner TV303 preliminary specifications: CPU – 4x Arm Cortex-A53 GPU – Arm Mali-G31 VPU – 4K hardware video decodi…

Description removing "removable" paramter UUID from EFI partition was not found Jira reference number AR-1523 How Has This Been Tested? [x] (several) installs on Windows Laptop containing Windows 11 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

Description sunxi-6.1: update upstream to tag orange-pi-6.1-20230118-1327 sunxi-5.15: rebase Checklist: [x] Test build sunxi [x] Test build sunxi64, work on board banabapi-m64 ____ ____ _ __ __ __ _ _ | __ )| _ \(_) | \/ |/ /_ | || | | _ \| |_) | | | |\/| | '_ \| || |_ | |_) | __/| | | | | | (_) |__ _| |____/|_| |_| |_| |_|\___/ |_| Welcome to Armbian 23.02.0-trunk Jammy with Linux 5.15.90-sunxi64 View the full article

Congatec conga-HPC/cRLS is a COM-HPC Client Size C module based on a 13th generation Intel Raptor Lake processor with support for up to 128GB DDR5 memory through four SO-DIMM sockets. The COM-HPC module also provides up to three DDI display interfaces, two 2.5GbE networking interfaces with TSN support, two SATA storage interfaces, and a range of PCIe Gen 3, 4, and 5 interfaces through the two 400-pin connectors defined in the COM-HPC standard. conga-HPC/cRLS specifications: Raptor Lake-S SoC (one or the other) Intel Core i3-13100E with 4x P-cores @ 3.3GHz / 4.4GHz, 12 MB cache, Intel UHD Graphics 730; PBP: 65W Intel Core i5-13400E with 6x P-cores @ 2.4GHz / 4.6GHz, 4x E-c…

Intel has just discontinued PathFinder Eclipse-based development environment for RISC-V processors with the website now reading: We regret to inform you that Intel is discontinuing the Intel Pathfinder for RISC-V program effective immediately. Since Intel will not be providing any additional releases or bug fixes, we encourage you to promptly transition to third-party RISC-V software tools that best meet your development needs. PathFinder was a pre-silicon open-source development environment with support for vairous RISC-V cores, a set of other IP’s, multiple operating systems, and toolchains. It allowed designers to create RISC-V SoCs to and run them on FPGA platforms su…

My effort to implement an official armbian support for OLIMEX Teres A64. How to help Testing of the image To capture any bugs i need testers if you want to help then: 1. Install the provided image on a class 10 A1 or higher SDCard and use it to boot the system using command # dd if=/path/to/file/img of=/dev/SDCARD_HERE conv=sync status=progress && sync * Armbian_23.02.0-trunk_Teres-a64_bullseye_current_5.15.89_minimal.img * Armbian_23.02.0-trunk_Teres-a64_bullseye_current_5.15.89_minimal.img.sha * Armbian_23.02.0-trunk_Teres-a64_bullseye_current_5.15.89_minimal.img.txt DO NOT update/upgrade the system! (apt update or apt upgrade or apt dist-upgrade) * We need …

/bin/bash doesn't exists on Nix-like Operating systems + it's malpractice to hardcode binary path as it will depend on file system hierarchy This solution replaces that to use environment for binaries + adds option to change Bash binary during runtime through using BASH variable View the full article

Description Fixes meson64 current & edge kernels. Add patch https://patchwork.kernel.org/project/linux-amlogic/patch/d9721029-780e-09f1-0207-72d3897032a4@gmail.com/ The usage of edge-triggered interrupts lead to lost interrupts under load, see [0]. This was confirmed to be fixed by using level-triggered interrupts. The report was about SDIO. However, as the host controller is the same for SD and MMC, apply the change to all mmc controller instances. [0] https://www.spinics.net/lists/linux-mmc/msg73991.html Fixes: 1499218c80c9 ("arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi") Reported-by: Peter Suti <peter.suti@streamunlimited.com> Te…

correction of bpir2pro frequency control and changing the composition of images View the full article

LILYGO T-QT Pro is an ESP32-S3 WiFi and BLE IoT board with a 0.85-inch color display, 4MB flash, 2MB PSRAM, a USB-C port, a few GPIOs, and support for LiPo battery with charging. It is an upgrade to the ESP32-S3-based LILYGO T-QT V1.1 board that also supports LiPo battery power but lacks a charging circuit, so you had to remove the battery and charge it manually each time. The T-QT Pro adds a charging circuit and switches from an ESP32-S3 with an 8MB flash design to one using ESP32-S3FN4R2 with 4MB flash and 2MB PSRAM. LilyGO T-QT Pro specifications: Wireless MCU – Espressif Systems ESP32-S3FN4R2 dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acce…

Description Move disabled Rockchip64 patches to folder for eventual disposal as orphans if no one looks at them. How Has This Been Tested? no functional change View the full article

The Theengs Plug ESP32 smart plug runs OpenMQTTGateway firmware to serve as a BLE MQTT gateway and power meter compatible with Home Assistant, Homebridge, OpenHAB, DomoticZ, FHEM, Jeedom, NodeRed, AWS, and any MQTT-compatible IoT or Smart Home system. While the Matter standard should improve interoperability between Smart Home frameworks over time, there are still millions of devices already produced that are not Matter compatible, and the Theengs Plug aims to at least partially address this issue by helping users reduce the number of hubs required and have only one that supports different ecosystems. Theengs Plug hardware specifications: Microcontroller – ESP32 dual-core…

We’ve started to see Intel Alder Lake-N processors in mini PCs such MSI Cubi ADL N and Morefine M9 based on announced SKUs, but the Intel Processor N95 processor, which Intel has yet to unveil, is now found in a mini PC sold for various Aliexpress sellers starting at $187 for a barebone system and going up to $384 for a model with 32GB RAM and a 1TB SSD preloaded with an activation version of Windows 10 or Windows 11. The Processor N95 is a quad-core processor clocked at up to 3.4 GHz (Turbo) with 6MB cache, and 16EU Intel UHD graphics clocked up to 750 MHz. The TDP is not known, but considering the base frequency is shown to be 1.7 GHz in GeekBench it’s probably a 15W TD…

$ ./compile.sh bash: ./compile.sh: /bin/bash: bad interpreter: No such file or directory $ guix --version guix (GNU Guix) da9af8c72fe427e3eeb718b53c599139a8958d61 View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999]: I won't use JIRA as it's evidently a contributor to the replication crisis in the computer science How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Daily driving it, tell ya in few days Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particula…

TODO [ ] Explain to me DEFAULT_OVERLAYS so that i can document it else merge with fixme placeholder View the full article

Description Update odroidxu4-current kernel to 5.4.230. How Has This Been Tested? [x] Reboot of my Odroid HC1 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Added new Debian 12 Bookworm Jira reference number AR-1521 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build CLI and Minimal images [x] Build desktop XFCE image [x] Armbian repository needs to be updated due to missing packages... Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes h…

Up until now, U-boot would only support the User datagram protocol (UDP) allowing for TFTP and NFS boot, but Linaro has now added support for TCP and HTTP in U-boot in order to boot Linux from common web servers. TFTP boot from U-boot has been supported for years, as around the year 2006 I remember implementing TFTP Linux boot for a Karaoke system in order to lower the BoM cost by selecting a smaller flash device, and I also explained how to boot Linux on a TV box with TFTP back in 2014. This requires installing a TFTP server on your server, which is quite a trivial task, but HTTP servers are omnipresent, so it’s a welcome addition to U-boot. If you want to use HTTP to bo…

Morefine M9 is one of the first mini PCs I’ve seen sold with the 6W Intel Processor N100 Alder Lake-N quad-core processor and the price is not too bad with $199 asked for a barebone model on Aliexpress. The mini PC supports up to 32GB DDR4 RAM, is sold up with up to 1TB NVMe SSD, and features two 4K-capable HDMI 2.0 ports, Gigabit Ethernet, a WiFi 6 & Bluetooth 5.2 module, as well as four USB 3.2 ports. Morefine M9 specifications: SoC – Intel Processor N100 quad-core Alder Lake-N processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics; TDP: 6W System Memory – Up to 32GB DDR4-3200MHz Storage M.2 2280 PCIe/NVMe socket fitted 128GB, 256GB, 512GB, or 1TB …

tOCORAD32, aka ESP32 Software Controlled Radio, is a hackable, open-source hardware ESP32-based amateur radio board for walkie-talkie and data communication applications. The board comes with an ESP32 module with WiFi 4 and Bluetooth connectivity, an RDA Microelectronics RDA1846 RF IC used in many commercial walkie-talkies and offering a range up of to 5 km, a small display, a speaker, and a 18650 battery holder. SOCORAD32 specifications: Microcontroller module – ESP32-WROOVER-32E with ESP32 dual-core microcontroller, 4MB flash, 2.4 GHz WiFi and Bluetooth connectivity, built-in PCB antenna Walkie-talkie chip – RDA1846 single-chip transceiver for Walkie-Talkie applications…

Description rk322x proved to work well with kernel 6.1, so move current flavour to it How Has This Been Tested? [x] Tested on a live system Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject, rockchip 32 bit works well enough on 6.1 to move current kernel there Jira reference number AR-1518 How Has This Been Tested? [x] Tested on a live system Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description A patch for Pinebook Pro was not applying cleaning on current 5.15 rockchip64 kernel flavour, turns out that Orange Pi 4 LTS has no more HDMI video output and dmesg is lamenting about a missing extcon connector over fusb driver. fusb driver has the control over video output since it has the capacity to steer video output from HDMI to DP via USB type-c connector. A broken fusb driver causes broken video output; this problem can be shared among all boards that depend upon it. This pull request fixes the application of the Pinebook Pro patch, and perhaps fixes the Orange Pi 4 LTS broken video output. edit: I confirm, fixing the patch fixes also video output on…

Hey Karl here. The timing couldn’t have been more opportune when I was asked to review the TerraMaster F4-423 4-bay NAS. Let me explain why. I run Unraid as my OS of choice for my home lab. I have found it easy to maintain and hard to break. My old rig had a 3900X with 3 cores, 6 threads dedicated to docker containers, and the remaining cores running VM’s. It has been a fun and learning experience. I have run it with several different VM configurations over the past few years. The majority of the time I ran 2 VM’s. One personal and one work and I would RDP over to the work VM. If I wanted to game I had a third gaming VM and allocated all resources to it. It’s not super co…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…

Description Remove PGP signing from the script as its done in GHA. Also remove generating .current control file as its obsolete in this design. Also remove rootfs-cache alias as we are anyway making action script from scratch. Nobody else uses this. View the full article

Description It wasn't possible to use overlays out-of-the-box because of they didn't have same prefix as Armbian's overlay prefix. Now they have valid names and it's possible to use them without extra effort. How Has This Been Tested? [x] Checked overlays on OPi5 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Most chips support 2.2GHZ as maximum freq. Needs some voltage overclock to get 2.35-2.4GHz speeds. Looks like 50 mV enough to get this speeds. Note: Doesn't have much performance improvement. It provides better performance to disable DMC and changing governors. How Has This Been Tested? [x] Tested on OPi 5. Seems stable Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and publis…

SiFive HiFive Pro P550 RISC-C motherboard based on Intel “Horse Creek” quad-core SiFive Performance P550 processor will launch this summer with 16GB DDR5 memory, two PCIe expansion slots, Gigabit Ethernet networking, USB 3.x ports, and on-board graphics. Intel Horse Creek platform was first revealed when SiFive unveiled the SiFive Performance P550 64-bit RISC-core with Cortex-A75 class performance in June 2021. The companies then demonstrated an internal Intel Horse Creek board with 8GB DDR5 and PCIe Gen5 at the Intel Innovation 2022 Developer Conference last October, and it looks like the 7nm RISC-V processor will finally be available to developers this summer with the l…

SB Components’ HackyPi is a Raspberry Pi RP2040-based USB dongle whose main purpose is to teach ethical hacking and coding programs, in other words, some sort of portable educational hacking tool. The small USB stick features a 1.14-inch color LCD, a MicroSD card to store data such as scripts and photos, and a button to enable programming like on other Raspberry Pi RP2040 boards. HackyPi specifications: MCU – Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller @ 133 MHz with 264KB SRAM Storage – QSPI flash, MicroSD card slot Display – 1.14-inch color LCD with 240×240 resolution USB – 1x USB 1.1 Type-A port Misc – Boot “Initiate Program” button Power Supply – 5V via U…

add support for various HID game controllers and waydroid on rk3588 legacy kernel Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I…

Description Removing packages we might not need. Jira reference number AR-1516 How Has This Been Tested? [ ] Build all (supported) changed scenarios Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Sorry for my force push same as https://github.com/armbian/build/pull/4729 Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the f…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…

The Storaxa is a multi-purpose device powered by an Intel Celeron N6005 Jasper Lake processor which works as a 5-bay SATA NAS, which also happens to take up to four NVMe SSDs, a 4K media center with HDMI and DisplayPort interfaces, and a WiFi 6 router equipped with four 2.5GbE ports. The solution is fitted with 16GB RAM, comes with four 10 Gbps USB 3.2 ports and two USB 2.0 ports, and runs Proxmox VE to handle both TrueNAS SCALE and OpenWrt for the NAS and router functions respectively. Storaxa specifications: SoC – Intel Celeron N6005 quad-core Jasper Lake processor @ 2.0GHz / 3.3GHz (Turbo) with 32EU Intel UHD graphics @ 450 / 900 MHz (Turbo); 10W TDP System Memory – 16…

An OEM fanless network appliance has shown up online with a choice of 15-watt Intel Core i3-1215U, Core i5-1235U, and Core i7-1265U Alder Lake processors, and six 2.5GbE interfaces, as well as HDMI and DisplayPort video outputs, and support for M.2 NVMe SSD and 2.5-inch SATA drives. The design looks very similar to another white brand fanless network appliance with six 2.5GbE ports and an Intel Gemini Lake processor that we covered last year. Besides the faster processor, the new system replaces i225-V controllers with i226-V controllers, some of the USB ports have been upgraded to “USB 3.2”, and DisplayPort output was added for dual display setups. Specifications: Alder …

Twitter counter is broken so remove it until fixed be more precise in terms of 64 bit View the full article

A few days before launching the Raspberry Pi Camera Module 3 with HDR and autofocus, Raspberry Pi Trading asked me whether I would be interested in reviewing the new modules, and sent me three samples: the standard module, the Raspberry Pi Camera Module 3 Wide, as well as the NoIR version that lacks an IR filter and is better suited for night shots. It took a full week for DHL to send the package to my house, but I’ve now had time to review the new Raspberry Pi Camera Module 3, mostly with libcamera, but also Picamera2, focusing on the new features such as HDR, autofocus, and wide angle. I also had a quick try at the Raspberry Pi Camera Module 3 NoIR but without IR lights…

Description This PR enables support for MediaTek USB modules in Rockship legacy kernel. MediaTek branch was enabled in the past but all the devices were set not to build. This change adds them as modules. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Create and build full Armbian desktop image based on OPI5 WIP [X] Test with hardware on Orange PI 5 [X] Connect to Wifi network with image + Asus USB AC55 (MediaTek MT7621U) Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have comment…

Description On my samsung TV, Rock 5b disconnects the CEC communication after TV restart. This patch fixes that. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x ] Rock 5b using Samsung TV Checklist: [ x] My code follows the style guidelines of this project [ x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [x ] I have made corresponding changes to the documentation [x ] My changes generate no new warnings [x ] Any dependent changes have been merged and pub…

Description sunxi: switch CURRENT to v5.15.89, EDGE to v6.1.7 Checklist: [ ] Test build sunxi [ ] Test build sunxi64 View the full article

ZSWatch is an open-source hardware smartwatch based on an u-Blox ANNA-B402 module with Nordic Semi nRF52833 Bluetooth 5.1 SoC and running Zephyr real-time operating systems. We’ve seen several open-source hardware smartwatches over the years, as well as open-source firmware projects such as AsteroidOS or InfiniTime with the latter used in the PineTime smartwatch, and the ZSWatch adds to the list of interesting open-source wearables with all source files made public. ZSWatch specifications: Wireless module – u-blox ANNA-B402 based on Nordic Semi nRF52833 Arm Cortex-M4F microcontroller with Bluetooth LE 5.1 and direction finding support Storage – 8MB flash (MX25R6435FZNIL0)…

Description Moving wireless driver(s) from kernel specific folders. Todo: Compare and unify with the driver that floats in Rockchip patches. Jira reference number AR-1507 How Has This Been Tested? [x] Build test on current and next [ ] Test on hardware Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description If the argument for the key is a long path like /home/user/tmp/test or a non-existent device, then an awk script error and incorrect data or nonsense is printed on the screen. Split Pull Request [#4691] Checklist: [x] Test on board View the full article

After two years of hosting the event virtually, Brussels will once again welcome attendees on February 4 & 5 on the old stomping grounds of the ULB Solbosch Campus. Collabora will be presenting 8 different talks, in 7 devrooms as well as on the main track! View the full article

Description Clear the code for system scripts: /etc/kernel/postrm.d/xx-initramfs-cleanup /etc/kernel/postinst.d/xx-initramfs-cleanup Split Pull Request [#4691] Checklist: [x] Tested on the bananapim64 device of the jammy OS [ ] Test on a device with a separate partition /boot OS debian View the full article

Yesterday, I ended up on the HPMicro website showing the illustration above about a 1 GHz MCU called HPM64G0. It looked interesting enough so I clicked on the link to a page with some documentation for the company’s HPM6700/6400 microcontrollers. But in typical Chinese fashion, I was asked for a mobile phone number to download the documents. No luck this time since a Chinese mobile phone number is required. If anybody can set up a mirror on Mega or other websites easily accessible outside of China that would be appreciated. But eventually, I found an article in Chinese on EETrend where we can learn more about the HPM64G0 which happens to be a 1GHz microcontroller based on…

No descriptionView the full article

No descriptionView the full article

Description Hi Igor, as discussed in radxa e25 channel on discord i did a first build with edge kernel of e25 radxa board. my board did not yet arrvie so i cannot test this properly uboot is from radxa kernel is 6.1.y i was able to build this image Armbian_23.02.0-trunk_Radxa-e25_jammy_edge_6.1.7.img i also added another board here, it is a beelink gs1 allwinner h6 TV box which builds properly with just mainline kernel. and it works fine with, it is installed on internal emmc. Armbian_23.02.0-trunk_Beelink-gs1_jammy_current_5.15.80.img Armbian_23.02.0-trunk_Beelink-gs1_jammy_edge_6.1.2.img.sha Armbian_23.02.0-trunk_Beelink-gs1_jammy_edge_6.1.6.img How Has This Bee…

LILYGO T-RSC3 is a relatively compact ESP32-C3 board with WiFi 4 and Bluetooth LE 5.0 connectivity, support for RS232 and RS485 communication protocols through a DB9 connector and a terminal connector respectively, and a wide 5V to 24V DC power input. LILYGO had already made an ESP32 board with CAN Bus and RS485 interfaces called the T-CAN485, but without any isolation. The new T-RSC3 offers both RS232 and RS485 interfaces, but no CAN Bus, protected by isolated transceiver modules that should make it safer to use in industrial environments. LILYGO T-RSC3 board specifications: Wireless module – Espressif Systems ESP32-C3-MINI-1U module with ESP32-C3 RISC-V microcontroller …

Frore Systems Airjet Mini and Airjet Pro are active cooling chips that are just 2.8mm thick and quietly suck cool air in from the top of the chip before pushing it out the sides with the aim to replace traditional fan-based solutions in ultrabooks, or be integrated into VR headsets and smartphones for improved cooling. Yesterday we saw that cameras could clean themselves with micro-vibrations, and it happens that processors can be cooled with vibrations too as the Airjet chips are comprised of tiny membranes that vibrate at ultrasonic frequencies to generate a flow of air that enters through inlet vents in the top and transformed into high-velocity pulsating jets exiting …

Description Backported PR from https://github.com/jwrdegoede/rtl8189ES_linux/pull/87 to all other wifi drivers. (similar to #4661) Need to fix, but currently skipped: rtl8723cs: This driver was added to each kernel separately. Impossible to maintain. Need move driver to separated repo and add to the drivers_network.sh. rtl8723bs: have different code base, can't easily be ported. How Has This Been Tested? [x] It's builds without errors. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the…