SBC News

The Raspberry Pi Pico W board was launched with a WiFi 4 and Bluetooth 5.2 LE module based on the Infineon CYW43439 wireless chip in June 2022, and I wrote a tutorial showing how to connect to WiFi a few days after the launch, but nothing about Bluetooth LE. That’s because while the Raspberry Pi Pico W hardware supports Bluetooth LE, we were told that Bluetooth was not enabled at the time, but might be at a later stage. The good news comes from Alasdair Allan, who is responsible for the Raspberry Pi documentation, saying Bluetooth LE support is scheduled for the upcoming 1.5.0 release of the Pico C SDK. There’s currently an open ticket on GitHub for Bluetooth support adde…

Description Add support for sd card for Rock 5 (mainline linux) Remove tegra from kernel config Update Linux kernel to rc2 How Has This Been Tested? I builded image and Rock 5 boot up from sd card/emmc and I was able to reboot [x] boot up from emmc [x] boot up from sd card [x] reboot Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description This finally brings mvebu edge to 6.1. Two patches had to be disabled for compilation to work. 91-01-libata-add-ledtrig-support.patch 91-02-Enable-ATA-port-LED-trigger.patch these manly affect helios4 and it needs to be checked if ATA LED still works without them. Jira reference number AR-1313 How Has This Been Tested? Ran compile.sh with clearfogpro, testing on actual hardware shortly. View the full article

Forlinx FET-MX9352-C is a system-on-module based on NXP i.MX 9352 dual Cortex-A55 processor with Cortex-M33 real-time core and a 0.5 TOPS AI accelerator that can be used for industrial control, IoT gateways, medical equipment, and various applications requiring machine learning acceleration. The FET-MX9352-C follows last week’s announcement of the iWave Systems iW-RainboW-G50M OSM module and SBC with a choice of NXP i.MX 93 processors. The Forlinx module comes with two board-to-board connectors instead of solderable pads and can be found in the OK-MX9352-C single board computer with dual GbE, various display and camera interfaces, RS485 and CAN Bus, etc… FET-MX9352-C i.MX…

ASRock Industrial NUC 1300 BOX and NUCS 1300 BOX series mini PCs are equipped with Intel 13th generation Raptor Lake-P mobile processors up to the Core i7-1360P 12-core hybrid processor with four Performance cores and eight Efficiency cores. Yesterday, we wrote about the ADLINK Express-RLP COM Express module based on Raptor Lake-P embedded or industrial processors, but ASRock decided to use Raptor Lake-P mobile processors in their industrial “fanned embedded box PCs” coupled with up to 64GB DDR5 memory, and featuring high-speed interfaces such as USB4, 2.5GbE, and more. NUCS 1300 BOX Series Two NUCS 1300 Box models are available with either an Intel Core i7-1360P or i5-13…

Description Beta builds are not able to start X11 since 3dsupport group is exists on images. Oibaf PPA is definitely incompatible with RK3588 boards. It's not also exists on main target config. I also added beta build option for CLI. If you are not OK to that, i can remove it. How Has This Been Tested? [x] I didn't test it but i'm sure 3dsupport breaks X11 on RK3588 boards. (I built an image that have Oibaf PPA and it wasn't also able to get X11) Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding chan…

Pentium and Celeron brands are officially dead with Intel introducing the Alder Lake-N family comprised of “Intel Processor” and Core-i3 N-series processors based on the Gracemont “Efficiency” cores found in Alder Lake hybrid processors. Some of the details about the Intel Processor N100 and N200 processors were leaked last fall, followed by the Core i3-N300 and Core i3-N350, but at least it is now official, and we have more details so let’s dig into it. Alder Lake N-series key features and specifications: CPU – Up to 8x Gracemont Efficient cores for Core i3 N-series processor, and up to 4x with Intel Processor processor GPU – Intel UHD graphics with AV1 decode support Me…

ADLINK has just announced the Express-RLP COM Express Type 6 and COM-HPC-cRLS COM-HPC size C modules based on the new Intel 13th generation Raptor Lake hybrid processors with Embedded and Industrial SKUs. The Express-RLP comes with an up to 14 cores, 20 threads Raptor Lake-P processor, 64GB DDR5 SO-DIMM, and PCIe Gen4, while the COM-HPC-cRLS offers up to a 24-core Rasptor Lake-S embedded processor, 128GB DDR5 SO-DIMM, PCIe Gen5, and 2x 2.5GbE LAN. Both modules support Intel TCC, and Time Sensitive Networking (TSN), and are suitable for hard real-time computing workloads required by applications such as industrial automation, autonomous driving, AI robots, and aviation. Ex…

Description Applied series correctly How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

MediaTek Genio 700 is an octa-core Arm processor with two Cortex-A78 cores, six Cortex-A55 cores, a Mali-G57 GPU, and a 4 TOPS AI accelerator designed for consumer and industrial IoT applications. The new processor is a cost-down version of the Genio 1200 premium AIoT processor introduced last year with four Cortex-A78 and four Cortex-A55 cores. The Genio 700 offers many of the same features but with lower performance/capabilities, including a 3-core GPU and an AI accelerator limited to 4.0 TOPS, as well as support for dual displays up to 4K + Full HD (instead of 2x 4K), and 32MP single cameras (instead of 48 MP). MediaTek Genio 700 specifications: CPU – Octa-core process…

Description GitHub provides issue forms for opening an issue. Lets implement it and improve UX. Jira reference number AR-1470 How Has This Been Tested? Demo: https://github.com/igorpecovnik/linux-orangepi/issues/new/choose Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description We expect some changes, so lets have this image ready at each rebuild. View the full article

Description Lets keep consistent board naming. @jeanrhum Checklist: [x] My code follows the style guidelines of this project [x] My changes generate no new warnings View the full article

Description The board config is only contain some variable assignments, so it should be safe to be sourced twice. If it doesn't, we can fix easily. With this, we can overwrite the family config. So we don't need to check BOARD in family config ( e.g. the u-boot config ) . Just define it in board config. How Has This Been Tested? [ ] Build and run test for all board Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent ch…

Axelera M.2 AI accelerator module is said to deliver up to 214 TOPS of AI inference and up to 3200 FPS with ResNet -50 in a compact M.2 2280 form factor. Few details are available at this time, but the module is based on the company’s Metis AIPU (AI Processing Unit) using in-memory computing based on arrays of SRAM memory devices used to “store a matrix and perform matrix-vector multiplications “in-place” without intermediate movement of data”. This technology is said to “radically” increase the number of operations per computer cycle with without suffering from issues such as noise or lower accuracy. The Metis AI platform delivers 50+ TOPS per core (RISC-V-controlled dat…

Description Add more generic patches to legacy kernel and re-enable legacy images as those works decently while mainline is too fragile. Jira reference number AR-1396 How Has This Been Tested? [x] Generated image, run several tests, [x] installed headers, run zfs-dkms module compilation Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Devfreq governors compiled as modules are not be loaded automatically. When we need, for example, powersave governor for sun8i-a33-mbus, we must add it to modprobe autoload config. It is not comfortable. Also, I don't see any reason why governors must be modules. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [*] Tested on OrangePI Lite Checklist: [*] My code follows the style guidelines of this project [*] I have performed a self-review of my own code [*] I have commented my code, particularly in hard-to-understand areas [*] I have made corresp…

MECOOL KM7 Plus is a TV box powered by an Amlogic S905Y4 quad-core Cortex-A35 processor and running Google TV OS based on Android 11 TV OS, instead of just the more common Android 11 TV OS. Amlogic S905Y4 quad-core Cortex-A35 processor was first unveiled in January 2021 for 4K Android TV dongles with AV1 support, but we had not seen many hardware platforms with the process apart from Khadas VIM1S SBC for which we just published a review with Ubuntu 22.04. MECOOL KM7 PLUS specifications: SoC – Amlogic S905Y4 quad-core Arm Cortex-A35 @ up to 2.0 GHz with Arm Mali-G31 MP2 GPU System Memory – 2 GB LPDDR4-2400 Storage – 16 GB eMMC flash, micro SD slot Video Output HDMI 2.1 up …

No descriptionView the full article

QuickSpot Walter is an ESP32-S3 development board with built-in WiFi 4 and Bluetooth LE/Mesh connectivity, as well as NB-IoT, LTE-M, and GNSS support through a Sequans GM02SP 5G IoT modem that appears to be a variant of the Sequans Monarch 2 GM02S with GNSS support. Walter specifications: Wireless modules ESP32-S3-WROOM-1-N16R2 module ESP32-S3 dual-core LX7 microcontroller 2MB QSPI PSRAM 16MB QSPI flash 802.11 b/g/n WiFi 4 up to 150 Mbps with on-board antenna Bluetooth 5 LE up to 2Mbps, Bluetooth Mesh Sequans GM02SP modem LTE Cat M1 (LTE-M) and NB1/NB2 (NB-IoT) GNSS and assisted GNSS using GPS and Galileo constellations NanoSIM for cellular connectivity I/Os 2x 14-pin he…

Description If experimental support was added, lets generate nightly images. View the full article

BananaPi M2S: u-boot 22.10; remove patch from 22.07 @jeanrhum (in the original https://github.com/armbian/build/pull/4597) had the patch for both versions, here I hard switch to 22.10 (which also has boot-first-from-nvme-usb-sata patch for meson64) and remove the 22.07 patch. View the full article

Description It seem like that all of these package are useless. Remove them. Then, I will put armbian-zsh, armbian-config and plymouth-theme-armbian here. So we don't need to build them every time. How Has This Been Tested? No test. This should effect nothing. Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Remove duplicate codes for extrawifi. How Has This Been Tested? !!! Need to test for all kernel !!! Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description I was unable to boot from m2 ssd (of course with SPI NOR FLASH) when bootfs part was ext4. Then i used bootfs part as fat and it worked. I think Xunlong's Uboot source doesn't support Ext4 bootfs parts. How Has This Been Tested? [x] Tested on my Orange Pi 5 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description We need to activate USB 2 port that shared as type-c using echo host > /sys/kernel/debug/usb/fc000000.usb/mode. It's already exists in Orange Pi's build repo but not exists here. Probably, we also need TCPM patch for Type-C but i don't have an OTG cable so i can't test it but someone verified it on https://github.com/armbian/build/pull/4582#issuecomment-1363709144 How Has This Been Tested? [x] USB2 works on my Orange Pi 5 with these changes Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made correspond…

Description Adjust due to upstream kernel change. How Has This Been Tested? [ ] Build test at CI Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Maintanace. Jira reference number AR-1444 How Has This Been Tested? [x] Run View the full article

It’s the last day of the year and the time to look at some of the highlights of 2022, some traffic statistics from CNX Software website, and speculate on what 2023 may bring us. The semiconductors shortage continued in 2022, but things are looking brighter in 2023 with the full reopening of the world mixed with forecasts of difficult economic times that should keep the demand/supply equation in check. On the Arm processor front the biggest news of the year, at least in this corner of the Internet, was the launch of the Rockchip RK3588 octa-core Cortex-A76/A78 processor together with interesting single board computers that we’ll discuss below. Announced last year, the Amlo…

Description During the investigation of the issue, was found that the rk3399-rock-pi-4.dtsi file had undergone significant changes, which created a mess in the code during the patch application and unstable pcie operation. &pcie0 { ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; num-lanes = <4>; max-link-speed = <1>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqnb_cpm>; vpcie12v-supply = <&vcc12v_dcin>; vpcie3v3-supply = <&vcc3v3_pcie>; status = "okay"; }; &pcie_phy { status = "okay"; }; &pmu_io_domains { status = "okay"; pmu1830-supply = <&vcc_3v0>; }; &pcie_phy { status = "okay"; }; …

In this review of Khadas VIM1S SBC, we’ll install Ubuntu 22.04, and report our experience testing the performance such as memory speed and eMMC flash performance, and 3D graphics capabilities. Installing Ubuntu 22.04 on Khadas VIM1S Just like Khadas VIM4 and Edge2, the Khadas VIM1S SBC ships with the OOWOW firmware that allows easy installation of operating systems by downloading the images, and flashing them directly to the eMMC flash. You need just to connect a monitor and a USB keyboard and have an Internet connection through either LAN or Wi-Fi. Let’s start by installing Ubuntu 22.04 on Khadas VIM1S together. If no OS is installed, OOWOW will boot automatically, but …

Description This is really not needed default tool. Rely on installation from armbian-config. Jira reference number AR-1461 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Next Ubuntu (not LTS) Jira reference number AR-1380 How Has This Been Tested? [x] Build CLI and minimal images [x] Build desktop (our repository needs to be updated due to missing package) Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

SunFounder Pironman is a Raspberry Pi 4 enclosure inspired by Michael Klement’s DIY Raspberry Pi 4 mini server with an OLED display and ICE Tower cooling solution, as well as some improvements such as an aluminum alloy and acrylic enclosure, support for an M.2 SATA SSD, a power button for safe shutdown, an IR receiver, and an RGB LED strip. The company sent me a Pironman kit without Raspberry Pi 4 for review. I’ll check the package content, go through the assembly, software installation, and testing of the unique features listed above. Pironman unboxing Some of the main specifications are listed on the side of the package. The enclosure comes fully disassembled with the …

Description We are using debsums to check packages integrity. This packages is present in all distributions, we only need it for checking. After the installation, package was removed. Lets move this from packages lists. Jira reference number AR-1455 How Has This Been Tested? [x] Assembly of one rootfs Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings View the full article

With only a few months passing since our last new joiner update, it should come as no surprise that the Collabora crowd has expanded yet again. Our flexible disposition affords us an exceptional bunch to onboard when opportunity knocks, but also leaves room to hear new voices as we shape our path forward. View the full article

Boufallo Lab BL616/BL618 is a 32-bit RISC-V wireless microcontroller with support for 2.4 GHz WiFi 6, Bluetooth 5.2 dual-mode, and an 802.15.4 radio for Zigbee, Thread, and Matter designed for IoT applications. We first spotted the BL616 RISC-V IoT MCU during the BL602/BL606 announcement in November 2020, but we had virtually no additional information about it so far. It appears both BL616 and BL618 will be launched next month with the main difference between the two being that BL616 has 19 GPIOs and BL618 comes with 35 GPIOs. Bouffalo Lab BL616 and BL618 specifications: MCU core – 32-bit RISC-V CPU (RV32GCP) @ up to 384 MHz (datasheet says 320 MHz) with FPU and DSP, 32KB…

iWave Sytems iW-RainboW-G50M is an NXP i.MX 93 OSM-L compliant LGA module with up to 2GB RAM, WiFi 5 and Bluetooth 5.2 module that is found in the company’s iW-RainboW-G50S Pico-ITX SBC designed for industrial applications. The NXP i.MX 93 single and dual-core Cortex-A55 processor with an Ethos U65 microNPU was announced in November 2021, but we had yet to see any hardware based on the new NXP i.MX 9 processor family. The iW-RainboW-G50M and iW-RainboW-G50S change that with a system-on-module and single board computer. iW-RainboW-G50M NXP i.MX 93 system-on-module Specifications: SoC (one or the other) NXP i.MX 9352 dual-core Cortex-A55 processor @ up to 1.7 GHz with Arm C…

Description The current xradio patch causes the wifi mac address to randomize after every reboot on kernel 5.13+ Modified it to use the updated of_get_mac_address function on kernel 5.13+ and get a stable mac address How Has This Been Tested? Tested patch with 5.15.85 kernel on 3 aw-h6-tv boards. The wifi mac address is now stable/unique and not randomized after every reboot Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any dep…

Description This patch breaks Bluetooth. Before patch disable: root@rockpi-4b:~# dmesg | grep -E 'brcm|Blue|ieee' [ 8.488266] Bluetooth: Core ver 2.22 [ 8.488355] Bluetooth: HCI device and connection manager initialized [ 8.488367] Bluetooth: HCI socket layer initialized [ 8.488372] Bluetooth: L2CAP socket layer initialized [ 8.488385] Bluetooth: SCO socket layer initialized [ 8.594739] Bluetooth: HCI UART driver ver 2.3 [ 8.594761] Bluetooth: HCI UART protocol H4 registered [ 8.594766] Bluetooth: HCI UART protocol BCSP registered [ 8.594868] Bluetooth: HCI UART protocol LL registered [ 8.594875] Bluetooth: HCI UART protocol ATH3K registere…

Banana Pi BPI-Pico-RP2040 is basically a clone of the original Raspberry Pi Pico, but with the addition of an RGB LED and a 4-pin I2C connector, and the company replaced the micro USB port with a Type-C connector. The rest of the board, also called Banana Pi Pico, is exactly the same up to the through holes and castellated holes for the I/Os, and has a similar form factor as the Banana Pi BPI-PicoW-S3 that adds WiFi and Bluetooth through the ESP32-S3 wireless microcontroller. Banana Pi BPI-Pico-RP2040 specifications: MCU – Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller @ up to 133 MHz with 264KB SRAM Storage – 2MB QSPI flash USB – 1x USB 1.1 Type-C port used for…

Description This code was added to the source data from the kernel version 5.10.x, possibly even earlier. Accordingly, this patch is not needed. https://github.com/torvalds/linux/blob/v5.10/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi#L188 https://github.com/torvalds/linux/blob/v5.15/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi#L189 https://github.com/torvalds/linux/blob/v6.1/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi#L230 Before disable path: &hdmi_sound { status = "okay"; }; &hdmi_sound { status = "okay"; }; After disable path: &hdmi_sound { status = "okay"; }; How Has This Been Tested? [x] Rock Pi 4 Model B Checklist: [x] My code …

DshanMCU Pitaya Lite is an MCU development board based on yet another STM32 alternative: MindMotion MM32 Arm Cortex-M3 microcontroller that is said to be compatible with STM32. The MCU can be clocked at up to 120 MHz, embeds 128KB SRAM, 512KB flash, and the board offers two USB Type-C ports for USB and DAP debugging, a MicroSD card slot, a few buttons, I/Os are routed via through holes as well as a mini PCIe connector that can be used to connect a display. Pitaya Lite specifications: MCU – MindMotion Microelectronics MM32F3273G8P Arm Cortex-M3 microcontroller @ 96MHz (standard) to 120MHz (max) with 128KB SRAM, 512kB Flash; LQFP100 package Storage – MicroSD card Display – …

In researching a post in the forums, I found that the meson64-edge kernel config doesn't include rtl8822cs (which apparently some TV boxes use). This is enabled in most kernel configs: linux-bcm2711-current.config:CONFIG_RTL8822CS=m linux-bcm2711-edge.config:CONFIG_RTL8822CS=m linux-imx6-current.config:CONFIG_RTL8822CS=m linux-imx6-edge.config:CONFIG_RTL8822CS=m linux-media-current.config:CONFIG_RTL8822CS=m linux-media-edge.config:CONFIG_RTL8822CS=m linux-media-legacy.config:# CONFIG_RTL8822CS is not set linux-meson64-current.config:CONFIG_RTL8822CS=m linux-meson64-edge.config:# CONFIG_RTL8822CS is not set linux-mvebu64-current.config:CONFIG_RTL8822CS=m linux-mvebu64-edg…

SONOFF ZBMINI Extreme (aka ZBMINI-L2) is an ultra-compact Zigbee smart switch that can control home appliances and lights without a neutral wire and can fit into almost any mounting box. The tiny wireless switch can fit into the smallest EU-type/86-type/120-type mounting box, and works with gateways supporting the Zigbee 3.0 protocol such as ZBBridge Pro, NSPanel Pro, SmartThings Hub, Amazon Alexa Echo speaker, and so on. It also supports external switches, voice control, eWelink app control, and other features. SONOFF ZBMINI Extreme (ZBMINI-L2) specifications: MCU – Silicon Labs EFR32MG22 Arm Cortex-M33 @ 76.8 MHz Zigbee microcontroller with up to 512 kB flash, up to 32 …

AAEON RTC-710AP is a 7-inch rugged tablet powered by an Intel Celeron N3350 or Pentium N4200 Apollo Lake processor with up to 8GB LPDDR4 memory, 128GB eMMC flash, WiFi, Bluetooth, and optional 4G LTE connectivity. as well as GNSS supports. The IP65-rated tablet also comes with five physical function keys, an NFC reader, a 2MP front-facing camera, an 8MP rear camera, and an I/O expansion module for a 2D barcode scanner, LAN, UART, and other options. It also features a master battery and a hot-swappable slave battery to ensure continuous operation. AAEON RTC-710AP specifications: SoC (one or the other) Intel Celeron N3350 dual-core processor @ 1.1GHz / 2.4GHz with Intel HD …

Fixes the build of DEB packages after changing files in the shared GIT. Switching the LEGACY kernel from RK BSP 4.4 to RK BSP 5.10. View the full article

Lichee Pi 4A is a single board computer (SBC) powered by Alibaba T-Head TH1520 quad-core RISC-V Xuantie C910 processor @ 1.8 GHz with an Imagination GPU and a 4 TOPS NPU for AI that can compete against the Raspberry Pi 4 in terms of performance and features. We previously mentioned the Lichee Pi 4A (LPi4A) in our article about the Sipeed LM4A RISC-V system-on-module, but at the time we only had some benchmarks for the board and no photos and specifications about the SBC. Sipeed has now released photos and more detailed specifications and is taking “pre-orders”. So let’s have a look. Lichee Pi 4A specifications against the ones for Raspberry Pi 4. The TH1520 used to be …

Description runs when PR is opened and kernel config is changed it never fails, just making a report adjust run conditions on lint action Jira reference number AR-1457 How Has This Been Tested? [x] Tested in forked branch Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Geniatech DS-3566 is a board based on Rockchip RK3566 designed for digital signage applications with a low-profile, multiple video interfaces such as HDMI, LVDS, eDP, and MIPI DSI, and plenty of headers and connectors for expansion. The single board computer ships with up to 8GB RAM, 128GB eMMC flash, and supports Gigabit Ethernet, WiFi 5, Bluetooth 4.1, as well as cellular connectivity as an option. Some of the interfaces available through connectors include RS232, RS485, CAN Bus, I2C, SPI, etc… Geniatech DS-3566 specifications: SoC – Rockchip RK3566 quad-core Arm Cortex-A55 processor @ 1.8 GHz with Arm Mali-G52 EE GPU, 0.8 TOPS NPU System Memory – 2GB to 8GB LPDDR4 Stor…

Description We need to pre-install the necessary dependencies if the INSTALL_HEADERS=yes key has been selected. We have to pass the architecture value to the "make" command in the kernel header compilation script. Issues reference number #4589 How Has This Been Tested? This is how the log looks with the debug code enabled: For sunxi64: Unpacking linux-headers-current-sunxi64 (23.02.0-trunk) ... Setting up flex (2.6.4-8build2) ... Setting up libssl-dev:arm64 (3.0.2-0ubuntu1.7) ... Setting up bison (2:3.8.2+dfsg-1build1) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up linux-headers-current-sunxi64 (23.02.0-trunk)…

Achronix Semiconductor has recently announced the general availability of the Speedster7t AC7t1500 FPGA designed for networking, storage, and compute (AI/ML) acceleration applications. The 7nm Speedster7t FPGA family offers PCIe Gen5 ports and GDRR6 and DDR5/DDR4 memory interfaces, delivers up to 400 Gbps on the Ethernet ports, and includes a 2D network on chip (2D NoC) that can handle 20 Tbps of total bandwidth. Achronix Speedster7t highlights: Two-dimensional network on chip (2D NoC) enabling high bandwidth data flow throughout and between the FPGA fabric and hard I/O and memory controllers and interfaces MLP (Machine Learning Processors) blocks with arrays of multiplie…

Bumps ossf/scorecard-action from 2.1.0 to 2.1.2. Release notes Sourced from ossf/scorecard-action's releases. v2.1.2 What's Changed Fixes 🌱 Bump scorecard dependency to v4.10.2 to remove a CODEOWNERS printf statement. by @​spencerschrock in ossf/scorecard-action#1054 Full Changelog: https://github.com/ossf/scorecard-action/compare/v2.1.1...v2.1.2 v2.1.1 Scorecard version This release use Scorecard's v4.10.1 Full Changelog: https://github.com/ossf/scorecard-action/compare/v2.1.0...v2.1.1 Commits e38b190 Bump docker tag for release. (#1055) 7da02bf Bump scorecard to v4.10.2 to remove a CODEOWNERS printf statement. (#1054) 013c0f8 :seedling: Bump actions/depende…

Description When having a more complex setup, we might need to look route to get a primary device. Jira reference number AR-1450 https://github.com/armbian/build/pull/4610 How Has This Been Tested? [x] Manual run Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description I have a number of other single board computers that are connected to a kubernetes cluster running Longhorn for storage. I want to be able to add my new Rock 5B to the same cluster. I quickly found that the kernel doesn't have support for ISCSI_TCP. This support was added for all other boards in https://github.com/armbian/build/pull/2300. How Has This Been Tested? I built a custom kernel with this configuation using ``` ./compile.sh RELEASE=bullseye BOARD=rock-5b BRANCH=legacy BUILD_MINIMAL=no BUILD_DESKTOP=no KERNEL_ONLY=yes KERNEL_CONFIGURE=no I then installed the image and headers packages sudo dpkg -i linux-image-legacy-rockchip-rk3588_23.02.0-trunk_a…

Description We are using this: PRIMARY_INTERFACE="$(ls -1 /sys/class/net/ | grep -v lo | egrep "enp|eth" | head -1)" to detect primary interface. Sometimes it doesn't find proper one. This add additional check. Before: System load: 5% Up time: 11 minLocal users: 2 Memory usage: 14% of 982M IP: 10.0.30.126 CPU temp: 35°C Usage of /: 11% of 28G RX today: Error: No interface matching "--oneline" found in database. After: System load: 5% Up time: 15 minLocal users: 2 Memory usage: 14% of 982M IP: 10.0.30.126 CPU temp: 34°C Usage of /: 11% of 28G …

Description Bluetooth on PBP is currently broken and this might fix it. No hw to test but: https://github.com/armbian/build/pull/4608#issuecomment-1364484639 View the full article

Description nanopct4 rt5651 sound repeat pinctrl cause problem [ 7.395164] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-001a [ 7.395192] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk on device rockchip-pinctrl wlan-platdata,bluetooth-platdata is from legacy kernel, it not in mainline kernel (wireless,bluetooth drive by sdio,bluethooth node in dts), now remove it from dts general-add-panel-simple-dsi.patch is a general patch drive DSI lcd display pannel by dts easy, now add this to media edge for some people's need By the way, [board-pbp-fix-wonky-wifi-bt.patch] this p…

Description mipi_dsi_driver adjust function remove return void on linux6.1 (this patch also add new: orientation custom, reset level custom) How Has This Been Tested? [x] product panel_simple_dsi.ko on linux6.1 and drive my dsi lcd normal Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

M5Stack T-Lite is a Wi-Fi thermal imager with the same MLX90640 IR array thermal camera found in the M5Stack Thermal Camera 2 Unit plus a 1.14-inch color display to visualize the results on the device itself. Based on the ESP32-PICO-D4 system-in-package with WiFi and Bluetooth, the solution allows the user to access the 32×24 pixels thermal image either on the built-in display, or streamed to the local network or the cloud. M5Stack T-Lite specifications: SiP – ESP32-PICO-D4 system-in-package with ESP32 dual-core Tensilica LX6 microcontroller with 448 KB ROM and 520 KB SRAM, 2.4 GHz WiFi 4 and Bluetooth 4.2, and a 4MB SPI flash Thermal camera – Melexis MLX90640 infrared (…

Description Support for mainline for Rock 5B. Currently working is just EMMC. There is also ethernet support, but rock 5b uses PCIe for ethernet. How Has This Been Tested? Booted my Rock 5B fine, but have no EMMC, so the init could not mount the root drive. If someone can help with the testing... Checklist: [x ] My code follows the style guidelines of this project [ x] I have performed a self-review of my own code [ x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ x] My changes generate no new warnings [ x] Any dependent changes have been merged and published in downstream modules View t…

Description Jira reference number AR-1449 How Has This Been Tested? [ ] Tested in working branch Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

I had no trouble with my first experience with NanoPi R6S while installing and running the FriendlyWrt/OpenWrt 22.03 image, but that was another story when testing Ubuntu or Debian as the mini PC would not boot at all after flashing the images with eFlasher apparently successfully, but suspiciously fast (under 2 seconds). I spent nearly four hours trying the different images and then the Rockchip Windows utility, but all my attempts failed, and FriendlyElec was not overly helpful. So I decided to connect a serial console to see what was going on. The NanoPi R6S comes with a 3-pin header for the serial console, but it’s not populated. So I soldering one, but not at the top…

Description switch sunxi EDGE to 6.1.1; CURRENT to 5.15.85 Checklist: Successfully rebased and updated: v6.1.1; v5.15.85 [ ] Test build sunxi [ ] Test build sunxi64 View the full article

paperd.ink Merlot is a tricolor E-paper display with an open-source hardware control board based on ESP32 wireless SoC that is programmable with Arduino, MicroPython, or the ESP-IDF framework. We first wrote about the paperd.ink 4.2-inch ESP32-based monochrome e-Paper display last year, but the company has now refined its design with the “paperd.ink Classic” replacing the 3D printed enclosure with a vacuum cast enclosure and adding a 1,900 mAh battery. They also launched a new model, the Merlot, based on the same design but with a display supporting three colors: black, white, and red. Merlot specifications: Wireless module – ESP32-WROOM-32 module with ESP32 dual-core pro…

James Brown (aka Ancient) has built a tiny computer inside a LEGO brick with a Raspberry Pi RP2040 microcontroller and a 0.42-inch monochrome OLED display. And yes, it runs Doom. So finally, the LEGO minifigures have access to a computer suitable for their size :). James did not post a lot of information to reproduce the build by yourself, but he still released the “uGrey” code, written in Micropython, to display greyscale on a monochrome OLED. We can learn from the design in a mesmerizing video (embedded at the end of this post) showing how he made a Raspberry Pi RP2040 computer fit into a LEGO brick. The tiny design is comprised of five main boards/modules: Raspberry Pi…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number AR-1438 Tony McKahan an issue complaining that rockpis, among others, was overwriting the mainline kernels devtree. This patch replaces the existing sequence of board-rockpis-* patches doing that with a single one that starts from the rockpi-s devtree newly included in the mainline kernel. In reviewing the devtree, I noticed that the Bluetooth items for UART4 had somehow been lost. So, I restored them. How Has This Been Tested? Build new image. Verified WiFi, eth…

Description Update u-boot patches for JetHub D1/D1+ add rescue boot from microSD revert JetHub D1 eth mac generation with manufacturer OUI Jira reference number AR-1448 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been m…

Wilderness Labs Meadow F7v2 Feather is an STM32F7 Arm Cortex-M7 development board following the Adafruit Feather form factor and programmable with C# through a lightweight implementation of the .NET framework. We had previously seen the .NET Framework running on Android and Linux thanks to Xamarin’s Mono, but I don’t think I had ever a microcontroller-class board supporting the .NET framework and C# programming. But that’s exactly what the Meadow F7v2 Feather does. Meadow F7v2 Feather specifications: MCU – STMicro STM32F7 Arm Cortex-M7 microcontroller @ 216 MHz with 2D graphics and JPEG accelerators Memory – 32MB RAM Storage – 64MB flash Connectivity – 2.4 GHz WiFi and BL…

When PricelessToolkit failed to find an affordable (indoor) irrigation system that works with Home Assistant and ESPHome, he built the DROPLET board based on ESP32 wireless SoC and supporting up to five micro-pumps and soil moisture sensors. The board also comes with switches to manually control the pump, a built-in DS18B20 temperature sensor, a buzzer, and a I/O header to connect an expansion header for relay control, I2C, GPIOs, and an external DS18B20 temperature sensor. DROPLET specifications: Wireless module – ESP32-S with ESP32 dual-core 32-bit microcontroller @ 240 MHz with 2.4 GHz WiFi and Bluetooth connectivity, 4MB SPI flash Display – I2C header for 5V/3.3V OLED…

Description mipi_dsi_driver adjust function remove return void on linux6.1 (this patch also add new: orientation custom, reset level custom) nanopct4 rt5651 sound repeat pinctrl cause problem [ 7.395164] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-001a [ 7.395192] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk on device rockchip-pinctrl How Has This Been Tested? [x] product panel_simple_dsi.ko on linux6.1 [x] nanopct4 rt5651 sound normal on linux6.1 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code […

Banana BPI-Bit-S2 is a board for the education market that’s compatible with the BBC Micro:bit V2, but offers WiFi connectivity instead of Bluetooth LE through an Espressif Systems ESP32-S2 wireless microcontroller. The BPI-Bit-S2 succeeds the earlier Banana Pi BPI-Bit with ESP32 WiFi & BLE microcontroller that was a closer match to the original BBC Micro:bit than the new ESP32-S2 board for which I see little benefit, except for the slightly lower price tag. Banana BPI-Bit-S2 specifications: Wireless MCU – Espressif Systems ESP32-S2FN4R2 single core LX7 microcontroller with 320 kB SRAM, 2MB PSRAM, 4MB flash, 2.4 GHz WiFi connectivity LEDs – 25x RGB LED matrix USB – 1x…

Description moving out cleaning TBD: handling of parameters, removing of parameter "build repo as its not needed" edit aptly.conf in mktemp folder Jira reference number AR-1444 How Has This Been Tested? ./repo input output "update" "/home/igorp/Devel/build/" password sid,jammy,bullseye,focal This looks into input and make a repo in output, for sid,jammy, ... Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent chan…

Qualcomm QCX216 is a new IoT-optimized LTE Cat1 bis modem with a data rate of up to 10 Mbps at ultra-low power and support for WiFi-based terrestrial positioning thanks to the company’s database of billions of geolocated beacons. LTE Cat1 bis is an update to LTE Cat1 that does not require software and hardware upgrades to the base stations, enables smaller, simpler, and cheaper designs with a single antenna, and delivers higher speeds than LTE Cat M1 typically used in IoT applications. Qualcomm QCX216 LTE IoT modem will be used in smart utility meters, trackers, e-mobility solutions, parking meters, home automation and security equipment, and other location-based solution…

We’ve previously covered the EdgeBox-RPi4 industrial controller powered by a Raspberry Pi Compute Module 4 and plenty of I/Os such as RS485, RS232, digital inputs and outputs, and connectivity options such as Gigabit Ethernet, WiFi 5, Bluetooth 5, and 4G LTE. But if you don’t quite need the power of a Linux controller, the EdgeBox-ESP-100 industrial edge controller based on an ESP32-S3 dual-core WiFi and Bluetooth microcontroller and offering a similar set of features, albeit with twists, may be an interesting option. EdgeBox-ESP-100 specifications: Microcontroller – Espressif Systems ESP32-S3 dual-core Tensilica LX7 microcontroller @ 240 MHz with AI vector instructions, …

Description Patch was already eliminated in 5.15, resolve "edge" https://github.com/armbian/build/commit/9680fc46a01f70984e7b4b4c975b8dc4ecd8798e View the full article

Arducam Mega is a 3MP or 5MP camera specifically designed for microcontrollers with an SPI interface, and the SDK currently supports Arduino UNO and Mega2560 boards, ESP32/ESP8266 boards, Raspberry Pi Pico and other boards based on RP2040 MCU, BBC Micro:bit V2, as well as STM32 and MSP430 platform. Both cameras share many of the same specifications including their size, but the 3MP model is a fixed-focus camera, while the 5MP variant supports autofocus. Potential applications include assets monitoring, wildfire monitoring, remote meter reading, TinyML applications, and so on. Arducam Mega specifications: Camera Type 3MP with fixed focus 5MP with auto-focus from 8cm to inf…

BPI-M2S is a small form factor SBC based on the Amlogic A311D chipset (or s922x, not supported yet): Amlogic A311D (Quad A73 + Dual A53) CPU 4GB LPDDR4 RAM 16GB eMMC Mali G52-MP4 GPU HDMI 2.1 output 2 Gigabit ports 40 pins GPIO 1x USB-A 2.0 1 USB-C (5V power) Not working/tested: 2nd ethernet port MIPI DSI/CSI Description I created a dts from existing A311D board (vim3 and radxa zero2). I use the radxa zero2 u-boot that allows to launch armbian linux kernel for this board. The dts is basic for now, since I'm not an expert with device trees. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Pleas…

The development of Monado's inside-out tracking solution keeps improving and more devices are now supported. Here's an overview of where things stand, as presented at the FOSS XR conference in October. View the full article

Description of changes by commit Fix variable $root_partition_device to be a device path - as it is intended to be. Otherwise at least this line would fail: https://github.com/armbian/build/blob/8cc5b2664c8e49e252e5d383b983b8601440d8e7/packages/bsp/common/usr/sbin/armbian-install#L539 root_partition_device is all time equal to root_partition_device_name, since the lsblk does not list device path names rather than just the device (end-)name. Fixed to get e.g.: root_partition_device=/dev/mmcblk0 root_partition_device_name=mmcblk0 commit: d7cf33ae3ce9850d4b9e0f9edb4ec7595fb2220a Fix determination and usage of variable $sduuid Issue: The last grep filter in the follow…

LilyGO has launched a new ESP32-S3 WiFi & BLE camera board with the T-Camera S3 also featuring a small display, a PIR motion sensor, and a microphone, as well as an optional plastic shell. The T-Camera S3 is an evolution of the TTGO T-Camera ESP32 board introduced in 2019 with many of the same features, but the ESP32 microcontroller has been replaced with an ESP32-S3 microcontroller with vector extensions that makes it suitable for machine learning and computer vision applications. The new board also comes with a larger 16 MB SPI flash, more I/Os, and a few other small changes. T-Camera S3 specifications: ESP32-S3-WROOM-1 wireless module SoC – ESP32-S3FN16R8 dual-cor…

Description Add armbian patches to EDGE 6.1 Switch CURRENT to v5.15.84 Checklist: [x] Test build sunxi [x] Test build sunxi64 View the full article

The Banana Pi PPI-M2S is a single board computer (SBC) powered by either Amlogic A311D or S922X processor with 4GB RAM, 16GB eMMC flash, HDMI 2.1 and MIPI DSI display interfaces, one MIPI CSI camera connector, two Gigabit Ethernet ports with one PoE capable, as well as optional WiFi 5 & Bluetooth support. When we first covered the Banana Pi BPI-M2S over a year ago, all we had were some 3D renders of the board and some preliminary specifications. The company has now manufactured the board, provided some documentation, and started to take orders for the board on Aliexpress for $95.79 or $100 depending on whether Amlogic S922X or A311D is selected. Banana Pi BPI-M2S spec…

Bumps ossf/scorecard-action from 2.0.6 to 2.1.0. Release notes Sourced from ossf/scorecard-action's releases. v2.1.0 What's Changed Scorecard version This release uses scorecard v4.10.0. Improvements Docker build workflow by @​naveensrinivasan in ossf/scorecard-action#981 Use root user in distroless to support GitHub Actions by @​spencerschrock in ossf/scorecard-action#994 Disable pull_request_target by @​laurentsimon in ossf/scorecard-action#1031 Documentation Add PAT section explaining risks by @​olivekl in ossf/scorecard-action#1024 Make the badge text easier to copy by @​rajbos in ossf/scorecard-action#1026 New Contributors @​joycebrum made their first contr…

Bumps cirrus-actions/rebase from 1.7 to 1.8. Release notes Sourced from cirrus-actions/rebase's releases. 1.8 What's Changed docs: Fix errors in the example in README.md (#1) by @​martolini in cirrus-actions/rebase#98 runs-on property missing. by @​dim0627 in cirrus-actions/rebase#102 fix(chore): bugs autosquash always set true by @​adeherysh in cirrus-actions/rebase#103 New Contributors @​martolini made their first contribution in cirrus-actions/rebase#98 @​dim0627 made their first contribution in cirrus-actions/rebase#102 @​adeherysh made their first contribution in cirrus-actions/rebase#103 Full Changelog: https://github.com/cirrus-actions/rebase/compare/1.7...…

Bumps tj-actions/changed-files from 34 to 35. Release notes Sourced from tj-actions/changed-files's releases. v35 Changes in v35.0.1 What's Changed Upgraded to v35 by @​jackton1 in tj-actions/changed-files#886 chore: code cleanup by @​jackton1 in tj-actions/changed-files#887 chore: update test by @​jackton1 in tj-actions/changed-files#888 Full Changelog: https://github.com/tj-actions/changed-files/compare/v35...v35.0.1 Changes in v35.0.0 🔥 🔥 BREAKING CHANGE 🔥 🔥 Removed input max_fetch_depth What's Changed Upgraded to v34.6.2 by @​jackton1 in tj-actions/changed-files#878 fix: fail when the merge base is not found by @​jackton1 in tj-actions/changed-files#879 fix…

Contributing to the Vulkan Working Group since 2015, Faith has continues to make a significant impact. Her expertise and diligence has helped to shape the group and we're proud to see his hard work see some well earned spotlight. View the full article

Contributing to the Vulkan Working Group since 2015, Jason has continues to make a significant impact. His expertise and dilligence has helped to shape the group and we're proud to see his hard work see some well earned spotlight. View the full article

The exFAT file system is about to get faster in Linux 6.2, at least when creating files and directories, with the performance boost especially noticeable on low-end processors. Microsoft released the exFAT specification and announced Linux support in August 2019, which was followed by a new exFAT implementation in Linux 5.7 (June 2020) from Samsung. But people are still working on improving exFAT Linux support, and Yuezhang Mo, an engineer at Sony, committed a patchset for Linux 6.2 that reduces repeated traversal of directory entries to boost the performance of exFAT: After traversing all directory entries, hint the empty directory entry no matter whether or not there a…

Description Increase the maximum number of AP connected clients to 16 instead of 4 for ESP8089 driver for rk322x family on kernels 5.15, 5.19, 6.0 and 6.1. The patch is trivial How Has This Been Tested? [x] Packages for kernel 6.1 have been compiled and installed onto a running installation [x] The driver has been tested with up to 6 connected clients and worked with no issues Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any …

It’s now possible to make use of the Pinecil V2 soldering iron‘s Bluetooth LE connectivity through a web-based interface used to monitor and/or set the temperature and power of the RISC-V soldering iron. When the Pinecil V2 soldering iron was launched with a Bouffalo Lab BL706 RISC-V Bluetooth microcontroller last summer, we were told there were main potential cases to make use of the Bluetooth LE features: OTA firmware upgrade and remote telemetry and control. The latter is now being taken care of by Joric who has written a web application to visualize telemetry data and even control the temperature of the soldering iron. To be able to use the Bluetooth features, you’ll…

TopTon TP-X4F is a mini PC and network appliance equipped with four 2.5GbE ports and powered by a choice of processors from the AMD Ryzen 5000U series up to the Ryzen 7 5825U octa-core-16-thread processor. The system supports up to 64GB RAM and up to five high-speed internal SATA or NVMe storage devices through M.2 sockets and SATA connectors and comes with three 4K display interfaces: HDMI, DisplayPort, and USB-C, as well as four USB ports. TopTon TP-X4F specifications: SoC (one or the other) Ryzen 5 5600U hexa-core/12-thread processor @ 2.3 GHz / 4.2 GHz with Radeon Vega 7 graphics @ 1.8 GHz; TDP: 10-25W (default: 15W) Ryzen 7 5800U octa-core/16-thread processor @ 1.9 …

There is no way to support this on s905 TV Boxes while reusing the android u-boot as the android uboot on s905 conflicts with the partition table location of standard mainline linux (this only impacts s905 boxes; s905x[wl], x2, x3, etc will work). So this removes the old script that claimed to support this. The Amlogic TV Box install instructions on the forum have been updated to reflect this change. Changes to be committed: modified: config/sources/families/meson-gxl.conf deleted: packages/bsp/aml-s9xx-box/root/install-aml-s905-emmc.sh How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details f…

Description Divide kernel config ownership more precise. Jira reference number AR-1435 View the full article

Description I want to rebuild Bpi M5 with current kernel (now they are EDGE only). Jira reference number [AR-9999] How Has This Been Tested? [x] Boot Odroid N2+ image Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

OpenPLC is an open-source, free-to-use Programmable Logic Controller Suite, compliant with the IEC 61131-3 standard, and working with a range of hardware platforms such as Arduino, ESP8266/ESP32, Raspberry Pi SBCs, as well as Windows and Linux machines. When Arduino unveiled the Arduino PLC IDE, we noted the languages defined by the IEC 61131-3 standard were licensed, and the PLC key for the Portenta Machine Control unit sold for $17.60. One reader complained about the high license cost per device, but Massimo Banzi, the co-founder of the Arduino project, replied it was cost-effective for smaller deployments: Actually it’s not that much money compared to the cost of other…

Description This patch doesn't make any changes to the source file: -rockchip->ep_gpio = devm_gpiod_get_optional(dev, "ep", - GPIOD_OUT_HIGH); +rockchip->ep_gpio = devm_gpiod_get_optional(dev, "ep", GPIOD_OUT_HIGH); If this patch once had a function it has been lost in the Git history thanks to the patch archive folder shuffling. How Has This Been Tested? inert patch. Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [X] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any…

Description There are a large number of "roc-pc" boards as Firefly has adopted/misapplied the Libre Computer naming convention. Be as specific as possible. ALSO NOTE A DTS EXISTS IN MAINLINE. This patch is overwriting the mainline DTS entirely, and should be replaced with patches changing the mainline dts instead to avoid further deviation from the base. How Has This Been Tested? Simple file rename, no content change. Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [X] I have made corresponding changes to the documentation [X] …

everything is on top of existing rockchip-rk3588 family thus the same crazy half-android rk kernel tree and ancient rk u-boot orangepi5.wip: initial OrangePi5 support; u-boot and boardfile by @efectn; adapted to work with existing family OPi5's u-boot patches: by @efectn; extracted from Xunlong's single-commit tree adapted to work with existing family included the boot.scr fix patch from rock-5b orangepi5.wip: initial OrangePi5 support; kernel patches, extracted from Xunlong tree OPi5's kernel patches, all extracted from Xunlong's tree against Radxa's Only enable the DT patch for now Other stuff that looks might be useful is grouped in a few other disabled …

ELECFREAKS’ TOOCA Laser L1 is an affordable 5W laser engraver with a sturdy yet lightweight structure and that can engrave various materials including metals. It’s easy to use with a one-button press and suitable for education in schools. TOOCA Laser L1 laser engraver unboxing The laser engraver comes as a kit with components that can be easily assembled. It was well-packed with little risk of being damaged during transport. It also includes tools and instructions for assembly, and you don’t need any extra tools to complete the assembly. TOOCA Laser L1 specifications The machine measures 568x632x198 mm, weighs 3.2 kg only so it can easily be carried around, and offers a 4…