I Followed the 2 tutorials, .zip install and toothpick install and i cant even boot from sd card, i dont know what im doing wrong, i changed dtbs in extlinux.ext and tried all the u-boot and with no luck. Any suggestion is welcome.

First question, what build are you using, and what "tutorial" are you using?

I can tell you this box works. You can use u200 dtb but there is a better one in the forum. I  have not used the new builds so follow Steeman's advices. I will follow to help.

Edited January 6, 20233 yr by maka

Quote

First question, what build are you using, and what "tutorial" are you using?

I've tried two tutorals, first was this one https://www.youtube.com/watch?v=bb8F20rgEJ4&t=14s&ab_channel=i12bretro (obviously changed what dtb i think it suits me and uboot too), it didnt work, cant install, then i went to your guide, downloaded aml-s9xx-box cli "lunar" release, but i cant get it to boot to the sd card. I press the button before putting the power plug but it show a95x logo like in a boot loop. I dont know if im doing it wrong or just missed a step.

 

Quote

I can tell you this box works. You can use u200 dtb but there is a better one in the forum. I  have not used the new builds so follow Steeman's advices. I will follow to help.

Where can i find thad dtb? I dont find u200 dtb from the new community builds.

Where are you looking for the dtb files? They are there, /boot/dtb/amlogic/meson-g12a-u200.dtb

Note for the s905x2 you would be looking at the meson-g12a-* dtb files as candidates.

Look here 

 

 

 

 

I have same problem.  With bullseye don't work dtb file. I try with 2 Sd card, with busters work but no with bullseye