Skip to content
View in the app

A better way to browse. Learn more.

Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Raspberry Pi 400 Kernel Panic when Poweroff Issued

Featured Replies

mihanson@armbi400:~$ sudo poweroff

Broadcast message from root@armbi400 on pts/0 (Thu 2025-09-04 07:29:16 PDT):

The system will power off now!

mihanson@armbi400:~$ 
[41893.451514] reboot: Power down
[41893.454658] ------------[ cut here ]------------
[41893.459337] Voluntary context switch within RCU read-side critical section!
[41893.459354] WARNING: CPU: 0 PID: 1 at kernel/rcu/tree_plugin.h:331 rcu_note_context_switch+0x4e0/0x530
[41893.475859] Modules linked in: sg rfcomm cmac aes_arm64 algif_hash algif_skcipher af_alg bnep zram zsmalloc binfmt_misc hci_uart btbcm bluetooth ecdh_generic ecc bcm2835_codec(C) bcm2835_v4l2(C) bcm2835_isp(C) bcm2835_mmal_vchiq(C) v4l2_mem2mem vc_sm_cma(C) videobuf2_dma_contig videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd_bcm2835(C) videodev snd_pcm videobuf2_common snd_timer mc raspberrypi_hwmon snd raspberrypi_gpiomem i2c_dev drm drm_panel_orientation_quirks backlight fuse bonding ipv6 brcmfmac_wcc brcmfmac cfg80211 rfkill brcmutil uio_pdrv_genirq uio nvmem_rmem
[41893.527454] CPU: 0 UID: 0 PID: 1 Comm: systemd-shutdow Tainted: G         C         6.12.44-current-bcm2711 #1
[41893.537603] Tainted: [C]=CRAP
[41893.540606] Hardware name: Raspberry Pi 400 Rev 1.0 (DT)
[41893.545989] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[41893.553048] pc : rcu_note_context_switch+0x4e0/0x530
[41893.558080] lr : rcu_note_context_switch+0x4e0/0x530
[41893.563112] sp : ffff80008002b770
[41893.566466] x29: ffff80008002b770 x28: ffff2262c6ffb3c0 x27: ffff2262c0c5f8c0
[41893.573707] x26: ffff2262c0260000 x25: ffffcc22d85831f4 x24: 0000000000000000
[41893.580947] x23: 0000000000000000 x22: ffff2262c0260000 x21: ffffcc22d98b3070
[41893.588187] x20: 0000000000000000 x19: ffff22637b779fc0 x18: 0000000000000006
[41893.595426] x17: ffffcc22d97fb000 x16: 00000000a53a0512 x15: ffff80008002b0d0
[41893.602666] x14: 0000000000000000 x13: 216e6f6974636573 x12: 206c616369746972
[41893.609905] x11: 6320656469732d64 x10: ffffcc22d96d7a28 x9 : ffffcc22d7724ed8
[41893.617145] x8 : 00000000ffffefff x7 : ffffcc22d96d3960 x6 : 00000000000002b3
[41893.624384] x5 : 00000000000002b4 x4 : 40000000fffff2b3 x3 : 0000000000000000
[41893.631623] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff2262c0260000
[41893.638863] Call trace:
[41893.641336]  rcu_note_context_switch+0x4e0/0x530
[41893.646016]  __schedule+0xb4/0xe70
[41893.649463]  schedule+0x3c/0x148
[41893.652733]  schedule_timeout+0x98/0x1a0
[41893.656709]  wait_for_completion_timeout+0x80/0x160
[41893.661653]  mbox_send_message+0xf8/0x140
[41893.665716]  rpi_firmware_property_list+0x104/0x298
[41893.670662]  rpi_firmware_property+0x78/0xc8
[41893.674988]  rpi_exp_gpio_get_polarity+0x68/0x100
[41893.679760]  rpi_exp_gpio_dir_out+0x6c/0x120
[41893.684089]  gpiod_direction_output_raw_commit+0x6c/0x348
[41893.689562]  gpiod_direction_output+0xa8/0x1b8
[41893.694065]  gpio_poweroff_do_poweroff+0x2c/0xd0
[41893.698747]  sys_off_notify+0x48/0x80
[41893.702458]  notifier_call_chain+0x80/0x140
[41893.706699]  atomic_notifier_call_chain+0x44/0x70
[41893.711468]  do_kernel_power_off+0x5c/0x80
[41893.715618]  machine_power_off+0x40/0x58
[41893.719594]  kernel_power_off+0x88/0x98
[41893.723479]  __do_sys_reboot+0x1e0/0x240
[41893.727452]  __arm64_sys_reboot+0x2c/0x40
[41893.731514]  invoke_syscall+0x50/0x120
[41893.735314]  el0_svc_common.constprop.0+0x48/0xf0
[41893.740083]  do_el0_svc+0x24/0x38
[41893.743441]  el0_svc+0x38/0x120
[41893.746622]  el0t_64_sync_handler+0x120/0x130
[41893.751037]  el0t_64_sync+0x190/0x198
[41893.754745] ---[ end trace 0000000000000000 ]---

25.8.1 Trixie Armbian image and EXT4 FS. Does not happen on reboot, just poweroff.

 

The below also produce the same result.

$ sudo shutdown -H now

$ sudo systemctl poweroff

 

mihanson@armbi400:~$ armbianmonitor -u
Collecting info and sending to paste.armbian.com, wait...
Failed grabbing info (pipe 3 result 22) and sending to server paste.armbian.com.
Collecting info and sending to paste.next.armbian.com, wait...

https://paste.next.armbian.com/oxawoposil

Please post the URL in the forum where you've been asked for.

 

Edited by mihanson

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.