Allwinner sunxi

hello dear all, good day dear Armbian-experts recently i have managed to get Armbian up and running on a Banana Pi. I was very very glad. now i am digging deeper into the system and try to learn all the necessary things. regarding another system: on orange pi -pc i want to install armbian - from this page https://www.armbian.com/orange-pi-pc/ i fetch Armbian Stretch mainline kernel 4.14.y Server or light desktop usage scenarios. Stable question: can i upgrade after the installation the system to the newest kernel... ?!? Is this possible?

I have met an ethernet internal error. error log [ 2.003302] Internal error: Oops: 96000004 [#1] SMP [ 2.008184] Modules linked in: [ 2.011243] CPU: 1 PID: 33 Comm: kworker/1:1 Not tainted 4.19.12-sunxi64 #5.68 [ 2.018458] Hardware name: Orange Pi One+ (DT) [ 2.022909] Workqueue: events deferred_probe_work_func [ 2.028045] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 2.032837] pc : sun8i_dwmac_probe+0x16c/0x550 [ 2.037277] lr : sun8i_dwmac_probe+0x21c/0x550 [ 2.041715] sp : ffff000009273b00 [ 2.045027] x29: ffff000009273b00 x28: 0000000000000000 [ 2.050337] x27: ffff000008d9eb30 x26: ffff000008c023a8 [ 2.…

Hello dear commnuity have installed armbian banana pi m2 kernel 4.19 on a BPI How to get the graphical configuration screen!?

Hi, i am running armbian stretch on an OrangePi PC with "-dev" kernel and uboot. This was originally an jessie installation with legacy kernel, that was upgraded. I'm wondering now, why the cpu frequency only scales between 648 and 1008 MHz instead of 408 and 1296 MHz. Is this to be expected? cpufrequtils is configured to the latter. # lscpu Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 Model: 5 Model name: ARMv7 Processor rev 5 (v7l) CPU max MHz: 1008,0000 CPU min MHz: …

Hello, No bluetooth device in my Armbian... Banana Pi M2+ ARMBIAN 5.65 stable Ubuntu 18.04.1 LTS 4.14.84-sunxi dpkg-query -Wf '${Version}\n' bluez 5.48-0ubuntu3.1 No Bluetooth device(hci0): rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Which refers to the error: systemctl status ap6212-bluetooth.service ● ap6212-bluetooth.service - LSB: Patch firmware for ap6212 adapter Loaded: loaded (/etc/init.d/ap6212-bluetooth; generated) Active: failed (Result: exit-code) since Tue 2019-01-08 09:18:38 UTC; 1min 2s ago Docs: man:systemd-sysv-ge…

Working from the documentation here: https://docs.armbian.com/Developer-Guide_FEL-boot/#what-is-felnfs-boot. Not much luck so far with an FA NanoPi K1 Plus. Please see below for details. TIA.

Hi all, i am completely new to armbian and to be honest not yet completely convinced to change from bananian even that the time should have come. Until now, on my Bananapi M1, bananian was running without any problems. A few days ago, i tried to get familiar to armbian (debian stretch) for the first time on a test-SD-card. Now my problem: Since these tests, i am not able anymore to shutdown my running bananian-system to power off. The system seems to halt, but the power is not turned off and a few seconds later the Bananapi restarts. The problem remains even on a clear bananian1604-image. But: On the testSD-card under armbian the shutdown comm…

For days now I have been fighting to get this thing working. No boot, No hdmi, no sound, no wireless network and so on. Armbian is anyway the best choice for this device, Supported? well yes if you have lan, true HDMI Well i got it to boot, after writing a new image to sd card. finally booted, no signal detected ( with a DVI > HDMI ), I had to hook it up to a true HDMI and modify the script.bin file to get a signal. Got it to boot all the way to the desktop. Hurray ! Plugged in a crappy wifi adapter from Ali express (realtek 8081 i think it is) and I got wifi, jippi. Next time booting no wifi, no matter what I tried. Made a new image again, with modi…

I'm running some stress test on the NanoPi neo2 512mb, CPU heating reached 75-76 degrees, and it's stable, the problem that I faced is that the computer changed it's IP suddenly (after 55 minutes of test running), I guess it's because of a network card reset. Did anyone face the following issue? Is it related to the stress test? Or it's another networking problem? The test I'm running is with the "stress" tool, running long time stress on 4 CPUs. In addition, does anyone have any insights regarding this device? good or bad?

Greetings all, See my last post in thread for method I found to get around issues. EDIT: This may be limited to is an apt issue DNS seems ok after all. Use nmtui to edit network config not armbian-config None of what follows should be taken as complaining. I am only trying to get some help, give some observations from a non-expert viewpoint and possibly help ID a bug. Not being an expert, I am looking for confirmation. I am trying to get the NanoPi NEO core-2 LTS set up and am having some issues with apt. I haven't gone past that because the first thing after getting properly booting install (for me anyway) is to install webmin…

Armbian Legacy 5.56 Kernel 3.10 boots and installs to the eMMC (as long as ext2fs is picked). Armbian Dev 5.56 Kernel 4.19 does not boot from the SD Card at all (power LED and black screen). I don't have the serial console adapter (yet) so I don't know if there is something useful there.

Dear experts, I would like to make my OrangePi PC on board LEDs works like power (Green: Default ON) and status (Red:heartbeat blinking). root@orangepipc:~# ls -1 /sys/class/leds/ orangepi:green:pwr orangepi:red:status root@orangepipc:~# Any experts can assist me on this matter on edit in /etc/rc.local to get it works. Thanks in advance and appreciated your help. Regards, Sai Hou

Greetings to all, Preamble: Thanks to all that have worked to make the Armbian project what it is today. It is greatly appreciated! I have done numerous hours of reading and searching (due diligence). I know I could run a benchmarks and all but that means even more delay reaching the objective. Some brief guidance from those who have gone before would save a lot of time and would be greatly appreciated. Looking at the datasheets wasn't real helpful in guesstimating optimum performance configuration - especially since there are so many other factors that have an impact. Background: My objective is to achieve a reliable, long lif…

I started first with orangepi pc2 (H5) but now trying the same thing on orangepi one (h3) - trying to make ili9340 module work it works flawlesly on rpi with raspbian so the hw module works (and the fb_ili9340 module in kernel talks to it properly) debug info I pulled from rpi pi@octopi:~ $ uname -a Linux octopi 4.14.79-v7+ #1159 SMP Sun Nov 4 17:50:20 GMT 2018 armv7l GNU/Linux root@octopi:~# lsmod Module Size Used by xt_tcpudp 16384 1 iptable_mangle 16384 1 xt_DSCP 16384 1 bnep 20480 2 hci_uart 36864 1 btbcm 16384 1 hc…

Preamble: I have done numerous hours of reading and searching (due diligence). See end. I have a FA NanoPi NEO Core-2 LTS with shield and 64G M.2 (This shield uses JMS567-LGBB1A chip USB to sata for M.2 access). I have successfully installed Armbian from SD to and booted from the eMMC. Armbian Stretch mainline kernel 4.14.y - This image https://dl.armbian.com/nanopineocore2/Debian_stretch_next.7z armbianmonitor -u results http://ix.io/1xAA Logs indicate formatting did occur correctly as far as I can tell. The volumes are formatted as I selected - along with an 'extra' ext4 volume that looks like it is just for boot. NOTE: Since…

I installed ARMBIAN in a cubieboard2, then i insert a microSD card with 3 partitions and 1 of them cant be accesed directly from desktop... i receive the msg PERMISION DENIED. please i need help in that partition there is a program that i need to transfer to ARMBIAN to make my ARMIGA SYSTEM live again. How can i access it ?

Hi all, I've been struggling with the issue in the topic for a few days now. Actually the ideal solution would be a read-only root file system (with a writable overlayfs on top), so that I can just turn the power off, without risking any SD-card/filesystem corruption. There seems to be an easy solution for that according to this page: https://docs.armbian.com/User-Guide_Advanced-Features/ section "How to freeze your filesystem?". But the package "overlayroot" that is mentioned there does not seem to be available for Debian (Armbian Stretch). A quick attempt to adopt the overlayfs-startup scripts to Debian failed, because Debian is using systemd and the…

Hello. I would like to download the iso of the Orange pi One Plus with Kernel 4.19. But when i click on the link the image that i download is whit Kernel 4.18. Can you help me?. Regards.

I had an annoying issue with the WiFi of this board with Armbian 5.65 Ubuntu and Stretch. Sometimes it would spontaneous lose its WiFi connection. After researching it for a while I noticed that the wlan0 interface sometimes lost it's IP address. At first I thought it had something to do with the DHCP lease or sleep mode of the adapter. I just couldn't get my head around it and I ended up removing network-manager and going back to creating an interfaces.conf file for setting up my network interfaces. Somehow this solved the issue, the WiFi connection hasn't failed since! To do this, first create the wpa supplicant configuration file: ~# …

trying to get ili9340 to work on orangepi pc2 on bionic 4.14.91 ... there's a fb_ili9340 module in the staging directory, modprobe passes and the only thing in dmesg is warning it's staging nothing else but when I check /dev/fb* there's only /dev/fb0 (the original hdmi output on my monitor), there's no /dev/fb1 anyone can land a hand? give a hint?

Hi all, I've come upon a weird thing and I wanted to verify that I don't so something wrong. I've build a custom kernel module which is a PWM led device with an SPI interface. If I use the spidev, then everything works fine and I'm able to control the led. But when I'm using a custom device-tree and load the module then when I'm calling the `spi_write()` function then I'm getting an error (-22). The external device is actually an arduino nano that implements an I2C IIO light measurement device, using a dual light dependent resistor. Also I'm using the SPI channel to drive a led using PWM. It's very straight-forward a…

hello, i am setting up Mopidy in Orange Pi PC2 with armbian. but i found it only playback to the on-board sound card not the USB DAC i connected. root@orangepipc2:/# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 [] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: allwinnerhdmi [allwinner,hdmi], device 0: 1c22800.i2s-i2s-hifi i2s-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Audio [iFi (by AMR) HD USB Audio], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 i found there is no asound.conf in /etc ... …

Hello Maybe it will help someone. I lost a lot of time trying to connect 1-wire to Cubieboard2 via DVK 522 (it has DS18B20 connection on PB10 /gpio 66/ with external pullup). I've done steps in http://linux-sunxi.org/1-Wire with different combination and it doesn't work. In /sys/bus/w1/devices i had only sth like 00-80... 00-40... 00-c00.. without w1_slave file (i was 100% sure of hardware - it works on waveshare debian image) SOLUTION: In /boot/armbianEnv.txt lines needs to be without comments: and that's it ( overlays are created automatically by config so it will be sth like for…

Hi, my Banana Pi M2+ with Armbian Bionic doesn't see my access point on channel 13. I already set "REGDOMAIN=DE" in /etc/default/crda and also issued the command "iw reg set DE". "nmcli dev wifi list" shows a lot of other access points on channels 1, 6, 11, but not my own on channel 13. On the other hand, "iw list" shows: Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) …

Hello. Armbian_5.35_Orangepizero_Ubuntu_xenial_default_3.4.113.7z Orange Pi Zero 256 I am rading the bootlog via serial console. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. # systemctl status systemd-modules-load.service â systemd-modules-load.service - Load Kernel Modules Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static; vendor preset: enabled) Drop-In: /lib/systemd/system/systemd-modules-load.service.d ââ10-timeout.conf Active: failed (Result: exit-code) since Sun 2018-12-30 00:20:40 CET; 3min 8s ago Docs:…

I had it and lost it: u-boot with I2C. I did not write down how I did it (was heavy) Tried to build yourself again: does not work. u-boot-mizi.bin does not want to boot. For 2 days I try to find the solution. Google has already blocked me Can somebody help? I need i2c directly, after power on, to read FRAM and set relays. Programming in Linux is enjoyable but system administration is horrible. Thanks

I am lost, the soundcard used to work when I first started with this board but now I get a "aplay: device_list:270: no soundcards found..." error. When I tried to enable the analog codec using armbian-config I get an empty screen. This also used to work the first time. So I created a new SD card using Armbian Stretch this time but with exactly the same result. I am desperate! The diagnostic output is here http://ix.io/1x25 Kind regards, Hans C

Hello, I can't boot my new OrangePi One v.1.1. I have used various SD cards including Sandisk Ultra 32GB. On the serial console I every time see: U-Boot SPL 2018.05-armbian (Oct 26 2018 - 22:09:12 +0200) DRAM: 512 MiB Trying to boot from MMC1 MMC Device 0 not found spl: could not find mmc device. error: -19 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### Power supply is 5V 3A. Ethernet is unplugged and nothing is connected to USB. What I tried: - Flashed on two different computers (MAC and Windows) - used both etcher and dd - checked cards with h2testw for errors (…

I am trying to set up a Orange Pi Zero to use as a small NAT/ Bridge Device. I want to use an Android phone in USB tether mode to give its 4g connection to an interface on the opi zero then use a network bridge to join the 4g connection to the lan port, also the opi zero is gonna run a small section of code on the USB interface that changes the TTL of all packets through the interface. On my linux mint box the script looks like pkexec sysctl net.ipv4.ip_default_ttl=65 && echo 65 | pkexec tee /proc/sys/net/ipv4/ip_default_ttl but i am running into issues with the very first part, that is getting my phone native USB tether to be recognized as an interface in …

Is there a way to run netflix yet? Does Chromium run well and able to run netflix? Appears this doesn't matter, because Chromium doesn't work with netflix anymore... Does anyone know if chromium OS works well with OPi PC otherwise? Basically I want it to work for netflix, I also want to connect it to a printer, and the ability to run NordVPN and a torrent client would be a bonus as well.

Is the build for Orangepi Plus the same for Orangepi Plus 2? When I download for OPI Plus 2 I get the following file: Armbian_5.65_Orangepiplus_Debian_stretch_next_4.14.78 but it will not start

Hello All, I have configured OrangePiR1 as router. There are three network interfaces, two as wired and one wifi(hotspot). eth0 serve for access to internet(via ppp/adsl) and eth1+Wlan0 for internal network. Interfaces eth1 and wlan0 are in bridge br0. Problem is, that interface eth1 sometimes loses connection/link(cable and switch were checked ). Next nonstandard behavior of eth1 is, that only yellow led control is blinking, while green led control is not alight. Network interfaces were configured via file /etc/network/interfaces. However, when I checked network manager nmcli, I saw, that some connections are configured there too (there can …

Hi All, I am working on project using Qt(IDE), C++(language) and opencv libraries. The board I am using is Olimex Olinux A64. In the project I have a GUI that displays the input from a camera and has various status indicator labels. These labels indicate various states the system is in at any particular instance of time. I load different images in the labels to indicate different states. As of now the trigger to change the image of a label comes from soft buttons written in c++ using the Qt buttons layout. I am trying to find a way to control the change of images in the labels using hardware buttons that are connected to the GPIOs of the A64 board. Cou…

My PineH64, as well as OrangePI one plus (H6) were working fine using 4.18.rc7-bionic till I have tried apt upgrade I'm getting the following error on both. Any ideas? Thank you vm Starting kernel ... [ 2.104055] Internal error: Oops: 96000004 [#1] SMP [ 2.108938] Modules linked in: [ 2.111997] CPU: 1 PID: 33 Comm: kworker/1:1 Not tainted 4.19.11-sunxi64 #5.67.181221 [ 2.119819] Hardware name: Pine H64 (DT) [ 2.123750] Workqueue: events deferred_probe_work_func [ 2.128887] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 2.133679] pc : sun8i_dwmac_probe+0x16c/0x550 [ 2.138121] lr : sun8i_dwmac_probe+0x21c/0x550 [ 2.142560] s…

I'm running an updated armbian stretch mainline on a nanopi neo and hitting a wall where I thought there would be no obstacles in my path. I'm using 433Mhx Tx and Rx devices so I'm building WiringNP (from FriendlyArm) and rfoutlet (from github.com/timleland/rfoutlet.git). I'm getting errors such as wiringPi ISR: Not implemented when running RFSniffer. [This is the current error, it's been one after another]. My mind is muddled at the moment since I've done this kind of thing several times in the past on other devices including the Orange Pi Zero. Can someone tell me if this is me, or if it's a NanoPi Neo-thing? Shouldn't this be straight-forwa…

I found the way to install, keep updated and easily uninstall plexmediaserver without using armbian-config. here is the link https://forums.plex.tv/t/read-me-first-about-server-armhf-arm64-debian-ubuntu-raspberry-pi/226567. I used the version arm64 / ARMv8 and on OPzeroplus with H5 works very well. Spoiler arm64 / ARMv8 # become root sudo su # add my public key wget -O - https://dev2day.de/pms/dev2day-pms.gpg.key | apt-key add - # add my PMS repo echo "deb [arch=armhf] https://dev2day.de/pms/ stretch main" >> /etc/apt/sources.list.d/pms.list # activate https apt-get insta…

Hi everyone. I have a opz with H2+ and expansión board. I had installed Jessie before. And now, I upgraded to stretch. why espeak-ng sounds so bad?? in jessie that did not happen.

Hi I own since a while an Orange Pi One Plus board that I have been unable to use till now (OS images supplied by manufacturer are just a joke !). I wanted to give it a test with ARMBian as you offer now some Beta images. As both Bionic and Stretcher are offered, is there one of them more stable or more near something finished ? Did someone have tried the board with one of these ? and did it work ? Thanks Vincèn

hello i just install the latest armbian on orange pi pc2 board, the kernal is already 4.14 therefore the OTG function should be there. root@orangepipc2:~# dmesg |grep musb [ 1.323924] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 1.323939] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 9 [ 1.324416] usb usb9: Manufacturer: Linux 4.14.78-sunxi64 musb-hcd [ 1.324421] usb usb9: SerialNumber: musb-hdrc.1.auto however, i cannot enable the usb serial over OTG. anyone can show me how to do it? i tried it on debian and windows but both has nothing when i connect to the OTG port. thanks very mu…

any setting to put opizero h2 in promiscuous mode to record wifi packets?

Because today I did get my Black-Friday NanoPi Neo2 LTS 1GB I swapped my old Neo2 against this new 1Gb LTS-version. After assembling the new LTS to the fresh heatsink I did a testdrive and all went fine (network etc). So I did try to put the faceplate back on the case but it doenst fit. At the time when I did buy the case there was also a faceplate for the normal H3 Neo delivered. So for the new LTS Neo2 I had to use the faceplate for the H3-Neo, because the new LTS Neo2 has the USB-Port aligned like the H3-Neo . The old Neo2 has his USB-Port (on the main Neo2-PCB) a bit shifted against the Network-port. Also the new LTS …

Today I swapped my old Neo2 against a Neo2 LTS 1GB in my NAS case - so I had a old Neo2 512MB free for the black Aluminum-OLED-case which I got in a drawer. Now I did try to activate the OLED in ARMBIAN 5.67 user-built Debian GNU/Linux 9 (stretch) 4.19.4-sunxi64 Linux npi-neo2-27 4.19.4-sunxi64 #6 SMP Fri Nov 30 14:02:43 +03 2018 aarch64 GNU/Linux First (like on a i2c-clock" I activated i2c0 in armbian-config: root@npi-neo2-27(192.168.6.27):~# armbian-config System --> Hardware --> [*] i2c0 After the reboot I checked for the i2c-OLED-device and got: root@npi-neo2-27(192.168.6.27):~# apt install i2c-tools root@npi-neo2-27(…

I was struggling to make SPH0645 I2S microphone to work with H3 mainline kernel (4.14.87), on NanoPi Neo Core. After weeks of distress, I finally made it work! Maybe some will find it useful. Here's what I did: 1- In file sound/soc/sunxi/sun4i-i2s.c, change the following line { SUN8I_I2S_RX_CHAN_SEL_REG, 0x00000000 } to { SUN8I_I2S_RX_CHAN_SEL_REG, 0x00001000 } You may have to download the linux-source package for your kernel version, or you can build your own kernel. It's weird that in legacy kernel, this register was assigned 0x00001000 by default (and the mic worked easily on that kernel). Not sure why it's changed. I'm not …

Latest doesn't seem to work at all, so something like 5.59 4.18.0-rc7-sunxi64 mentioned here https://github.com/armbian/testings would be ideal. Alternatively is there a way I can build old version myself? I ran ./compile docker BOARD=orangepilite2 BRANCH=dev but resulting image doesn't work also.

Hi, I have an orange_pi_pc installed Armbian(Debian) and enable desktop. But I want to hide mouse cursor when it start. I find "Mouse and Touchpad" setting,but I can't set mouse Default Theme. Is there someone know how to hide mouse cursor on it?

Good day! I connect the real time clock, made according to the instructions: RTC time is set I set the wrong time in the RTC, reboot. I look at the time in the system clock - at first not the right one, from the RTC, then they are synchronized and it becomes the right one. But in RTC, the new correct time is not recorded. What am I doing wrong? Or what else needs to be done?

Hi all, I'm puzzled how everybody is building clusters of cheap SBC's, but nobody is implementing HA, redundancy, resiliency, failover, etc. They're just SBC's networked together. The SBC's are underprovisioned for Ceph, so I think that even if a Ceph configuration was managed to be shoehorned in, it wouldn't perform well. I don't know if DRDB is an option. How are people actually doing implementing real clustering technology on Orange Pi, for example? I'm using OPi+2E. Kind regards, Andrew

Hi, I use orange pi pc plus with armbian bionic, firstly I use it with a SD card and the temperature its around 30 centigrade degrees, its ok. Then I use EMMC without SD card and the temperature increases to 51 degrees (I think it´s very high), they are some way to use EMMC without the board increases the temperature?? Best regards, Nelson

Hello Could You advice how to steering my GPIO output I need set "+" for this 4 canal 31 33 35 37 I already have the connect but can`t fine tutorial on web how to do it.

The translation was done by Google Hello friends, my hardware: Orangepi pc plus dac-pcm5102mk-i2s. 3.5 "touch display So far I have the system in eMMC (ARMBIAN 5.60 stable Ubuntu 16.04.5 LTS 3.4.113-sun8i) and optionally on 16GB uSD card (ARMBIAN Debian GNU / Linux 8 (jessie) 3.4.113-sun8i). In both cases, an xfce desktop is installed. The setup of the DAC I have after the tutorial I2S on Orange Pi H3 by Da Alchemist, February 29, 2016 in both Debian 8 and Ubuntu 16.04. Works well. I installed the display after the hints from How to use Touchscreen + LCD on H3 devices by kutysam, July 31, 2017. It claps with the display of the desktop, but the touch …

Had orange pi pc, can I write armbian img file to USB and boot from USB directly? my two sd cards failed less than 2 years, so consider to use USB drive instead

terminal command to connect 1)wifi (using username and password). 2)hotspot os i am using is Armbian_5.65_Nanopiduo_Debian_stretch_next_4.14.78.

Hi there I have a banana pi M1 and I have installed Armbian on it. The HDMI output / Display work fine if I have HDMI connected to the HDMI port of BPi and monitor/tv is turned on before Armbian booting process starts. However if I don't have HDMI connected before boot process or Monitor/Tv is not turned on then I don't see the display if I connects the HDMI or turned on Monitor later. It is a problem for me because when I want to connect to display to already booted OS. Does anyone faced this behavior? Please advise.

Hi I try use Nokia 5110 with Orange pi zero. I found this library: https://github.com/rm-hull/luma.lcd and try to run it on my orange pi with this tutorial: http://codelectron.com/interface-nokia-5110-lcd-and-raspberry-pi-python/ so in python shell I add these: >>> from luma.core.interface.serial import spi >>> from luma.core.render import canvas >>> from luma.lcd.device import pcd8544, st7735, uc1701x >>> import OPi.GPIO as GPIO >>> from luma.lcd.aux import backlight but after add this line, I got many error that told me that library is used for Raspberry pi only: >>> serial = spi(p…

hi how can i enable the tv out in orange pi PC+, I need to do a kiosk mode thanks

Hi! Periodically, time in two-three days, sharply increases CPU utilization, the system becomes disfunctional. SD card and power supply maybe not the best, but they working fine in other systems and I'm tried others. SSH hangs on login while this problem is actual, but i have a serial connection, so can investigate in real time. Please, advise, what to look when this situation came again? top - 03:02:15 up 24855 days, 3:14, 1 user, load average: 1.75, 1.77, 1.93 Tasks: 125 total, 3 running, 70 sleeping, 0 stopped, 8 zombie %Cpu(s): 17.4 us, 26.6 sy, 0.0 ni, 56.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem : 505152 total, 9724 free,…

Hello, I have owned the Orange Pi PC for quite a while now, but I have been unable to solve a problem. The problem is that I can never quite manage to get the GPU drivers to work perfectly. They will often crash when using certain software like Chromium. Here is what I have tried doing so far: - Build and install the helper modules (libdri2,libump) - Installing the sunxi-mali driver - Building the video driver (xf86-video-fbturbo) - Build glshim -- Doing the following does not seem to have an effect on glxgears -- - Update arm-linux-gnueabihf configuration <-- Doing this breaks certain applications and gam…

Hi! I've been using Armbian on my a20 olinuxino lime2 board without issues for over a year now. Yesterday i decided to reflash the installation image onto the SD board. I've tried to flash it to different SD cards using the same method (SD card formatter + etcher), all of them booted but the SSH server always refuses the connection. Are there any workarounds to this?

RT, i am trying to use git and aarch64 tools to compile a lastest u-boot by my own,but ,it failed. there're the steps i was doing: 1. downloads the latest u-boot source code from offical web: git clone git://git.denx.de/u-boot.git 2.downloads the ARM Trusted Firmware from offcial web: git clone https://github.com/ARM-software/arm-trusted-firmware 3.compile the ATF for BL31 by using this cmd: sudo make CROSS_COMPILE=aarch64-linux-gnu- PLAT=sun50i_h6 all and then move the BL31 file into the u-boot root fold. 4. compile the u-boot for H6 by using this cmd: sudo mak…

I wouldn't ask for help here if I could find enough information to solve my problem. My program takes user-space GPIO interrupts as signals. It depends on this feature and GPIO interrupts are not replaceable. Testing code is as follows (on Pin12/PA07/GPIO7) by using SysfsGPIO: echo 7 > /sys/class/gpio/export echo in > /sys/class/gpio/gpio7/direction echo falling > /sys/class/gpio/gpio7/edge Check if it works with command `cat /proc/interrupts`: watch -n3 "cat /proc/interrupts | grep sunxi_pio" After configuration, give GPIO7 a pulse by attaching it to 3V3. This method does works on Orange Pi 0+ H5 running Ar…

Hello. I added overlays=pwm to /boot/armbianEnv.txt and reboot system. $ cat /boot/armbianEnv.txt verbosity=1 logo=disabled console=both disp_mode=1920x1080p60 overlay_prefix=sun8i-h3 rootdev=UUID=3d863bb3-b616-4229-94e7-8c92ac95501a rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u overlays=pwm Armbian can't boot-up. ** Unable to read "/boot/boot.env" from mmc0:1 ** Failed (-5) In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 230454 bytes read in 23 ms (9.6 MiB/s) starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 USB4: USB EHCI 1.00 USB5:…

Hello! In order to compile software on my Banana Pi running Armbian 5.27 Debian 8, I started off uncommenting the "# deb-src" lines in /etc/apt/sources.list and then ran apt-get update and apt-get upgrade. The start screen in the shell would then ask me to reboot as the kernel was updated. But after the reboot there was no AppleTalk anymore to serve my old devices. Compiling a newer Armbian with an up-to-date version of Debian is of no use to me as I run software (A2SERVER) that is incompatible with newer systems. So how can I upgrade my system without loosing AppleTalk (which I configured as a kernel module when compiling two years ago)? …

Hello, I want to use Armbian on a Cubietruck with an Onyx Boox Max 2 ebook reader (HDMI port) as display. I tested Armbian Stretch mainline kernel 4.14.y and Armbian Xenial desktop legacy kernel 3.4.y. But with both systems I get a black screen. I use the serial console to access the cubietruck. When I plug in the HDMI cable I get following info on Armbian Xenial desktop legacy kernel 3.4.y: <6>EDID version: 1.3 <6>PCLK=125000000 X 2104 2244 2284 2384 Y 1560 1565 1570 1590 fr 32 NP <6>Using above mode as preferred EDID mode <6>PCLK=125000000 X 2104 2244 2284 2384 Y 1560 1565 1570 1590 fr 32 NP <4>Unimplemented SV…

Hi, I am running a OrangePi One with Linux orangepione 3.4.113-sun8i #18 SMP PREEMPT Wed Jan 24 22:10:49 CET 2018 armv7l armv7l armv7l GNU/Linux DISTRIB_ID=Ubuntu DISTRIB_RELEASE=16.04 DISTRIB_CODENAME=xenial DISTRIB_DESCRIPTION="Ubuntu 16.04.3 LTS" And it seems that when I start the system without the hdmi cable and plug it afterwards, the HDMI is not handle correctly and my TV stays with a red screen. There is some way to configure the hdmi hot plug in this OS? I found that raspiberry pi has this option. (https://www.raspberrypi.org/documentation/configuration/config-txt/video.md)

Hi Everyone, I'm making a project about video and i want to export video to AV and HDMI without Desktop GUI. (i'm using armbian from https://dl.armbian.com/orangepizero/Ubuntu_xenial_default.7z). I reseached many documents, armbian-build resource, but i don't know how to make it! I have tried play video on Desktop GUI, it work fine! (mplayer, mpv) But without Desktop GUI, is it possible? Thanks!

I'm trying to boot from exp. flash from site (Armbian Stretch mainline kernel 4.19.y), board couldn't boot (LOG): U-Boot SPL 2018.03-armbian (Jun 11 2018 - 03:52:30 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):c9f55c0 NOTICE: BL3-1: Built : 03:52:19, Jun 11 2018 NOTICE: DT: sun50i-a64-orangepi-win INFO: Configuring AXP PMIC INFO: PMIC: DRAM voltage: 1.50V INFO U-Boot SPL 2018.03-armbian (Jun 11 2018 - 03:52:30 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on A64/H64 (1689) in SRA…

Hello guys! I'm beginner of Armbian. The problem is: Install Armbian Stretch mainline kernel 4.14.y on my device(Orange_Pi_PC),But I don't know how to enable UART1 . I tried to select UART1 & UART2 & UART3 on armbian-config,now i can see 'overlays=uart1 uart2 uart3' in /boot/armbianEnv.txt Connect serial device with P40(RX) P39(GND) P38(TX) . when i check serial device on ssh, i can see this info: uname -a Linux orangepipc 4.14.84-sunxi #3 SMP Sat Dec 1 07:18:41 CET 2018 armv7l GNU/Linux ls -l /dev/ttyS* crw--w---- 1 root tty 4, 64 Dec 4 20:24 /dev/ttyS0 crw-rw---- 1 root dialout 4, 65 Dec …

hello , I have Opi lite 2 I want to use it as low load server with minimal power consumption (min temp) I edited /etc/default/cpufrequtils like that min_speed=120000 max_speed=480000 governor=ondemand but it works on 888mhz constantly with load and without load (image 2) Ps: I have also OPi PC+ and edit of cpufrequtils works ok on it (image 1) what am I do wrong, or maybe armbian-config monitor doesn't work properly ? ARMBIAN 5.67.181202 nightly Ubuntu 18.04.1 LTS 4.19.4-sunxi64

Hello Community, Now I encountered the following problem when testing my "orange pi zero plus": I tested the processor load (stress-ng) at a working frequency of 624mhz for 25 minutes. Settings: mainline sunxi64-next (4.14.y) Spoiler armbianmonitor -m 10:53:44: 624MHz 4.50 100% 0% 99% 0% 0% 0% 100.1°C 1/1 [ 3314.299373] thermal thermal_zone0: critical temperature reached (105 n Message from syslogd@localhost at Dec 3 10:53:51 ... kernel: [ 3314.299373] thermal thermal_zone0: critical temperature reached (105 C), shutting down Stopp…

Hello guys, soon I will receive this nice toy (512MB) and I want to be prepared for my project: a domestic vpn server (using pptp) serving 1 o 2 guests at most. For this project I just need the RJ45 socket thus I would like to switch off as much as possible (e.g. GPU, on board wifi and others if there). Someone can point me to some resources or list what I can do to accomplish this? P.S. I know that pptp is not as secure as IPSec (and maybe IPSec is heavier for such device) but for the purpose of my project it is enough. Thanks a lot Gianni

Hello I have desktop version and I can`t on the AV sound card. The sound works on HDMI. Could You advice how to do it? I`m try to this solution but sound card is still not available. alsamixer is diffren

Hi. I am trying to perform pairing with the Bluetooth Low Energy device using the bluepy library. This library uses the MGMT for ble. The command 0x0019 (MGMT_OP_PAIR_DEVICE) returns success status (0x00). But using the sniffer I didn't found pairing request packet. Then I tried to perform pairing using btmgmt tool with the same result (not paired, but success is returned). Then I tried to use Bluetooth manager. User interface added the device and pairing returned success. But during the pairing my device wasn't indicate successful pairing. I still can't to read characteristics with no mitm protection. Which means that device is not paired. …

Hi, I am using NanoPi M1+ device with Armbian Bionic kernel 4.14.y OS in it. On doing hciconfig ... I get no output. on doing hcitool dev ... the output is none too... What is the issue here? Why can't I see the bluetooth device of the device?

due to systemd updates to a new version, maybe it's not compact with old kernel. after system upgrade, it fails to start sshd. after read code, insystemd-tmpfile chase_symlinks() return -EBADF from kernel, I guess legacy kernel not compact with newer systemd.

On the download page images have kernel 4.18-rc7 I need headers for this kernel. How to find which commit is these images are built from?

Hi on my Banana PI I have set no swapfile/partition since I never gonna use swapspace ram is gonna be enough. When I reboot I always find 499MB of swap swapon -s Filename Type Size Used Priority /dev/zram1 partition 255728 67052 5 /dev/zram2 partition 255728 66836 5 But I can find no entry of /dev/zram1 nor /dev/zram2 in /etc/fstab. Can anybody explain me how is this possibile? And how to manage those partitions? I found another /dev/zram0 which I think has to deal with log2ram since it is mounted on /var/log, is this corre…

Hi, I try to play with Armbian Stretch mainline kernel 4.14.y on Orange Pi Zero and need for my idea sf funktion (SPI) and i2c in u-boot terminal. I've build mainline U-Boot but the files in /boot directory from armbian looks so "strange". There is any description how to replace the files or make changes. Thanks for help. P.S. Have a lot of experience with uC programming, less with Linux.

Hello guys, I trying to make my ili9431 to show early stage of boot console. Everything works great if I load from /etc/modprobe.d/fb_ili9341.conf but if I load from armbianEnv.txt nothings happen. I suspect that I am trying to load the device before the driver is loaded. I read about "platform file" here: https://github.com/notro/fbtft/wiki/Boot-console but I have difficulties modifying the files because the guide is for RPI. Can someone guide me or at least to know if I'm on the right track? Hardware details: Device: Orange PI Zero Plus2 Kernel: Linux orangepizeroplus2 4.14.83-sunxi …

Hello everyone. My OP-PC is dead, with NO HDMI signal, NO console output, NO network output (LEDs off), only 1 LED is on which indicates SD card inserted (if SD card removes, it off). when use newly created SD card with Armbian, SDcard OS partition not resized. when connect to power supply, I can hear current noise. before it dies, it runs armbian server image with mainline kernel (4.14), it doesn't look like thermal fail, due to it runs very well during summer. I guess it is shorted some place, but I can't find where! so which hardware test point could I use to detects hardware failurtes.

First up, I did have a good dig around but couldn't find anything discussing my problem but if there is a thread already existing please just link to it, no need to get huffy. I have a problem with armbian on NanoPi NEO where USB devices are not properly detected at start up (warm or cold start). Armbian version details: BOARD=nanopineo BOARD_NAME="NanoPi Neo" BOARDFAMILY=sun8i VERSION=5.67.181115 LINUXFAMILY=sunxi BRANCH=next ARCH=arm IMAGE_TYPE=nightly BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage I have also tried nightly build Armbian_5.65_Nanopineo_Debian_stretch_next_4.14.78.img. The…

Hi, I'm using several Orange Pi Zero boards. At any given time, when I run "reboot now", I can no longer access the OPI via ssh. I tested the following distributions: Armbian_5.25_Orangepizero_Ubuntu_xenial_default_3.4.113 Armbian_5.59_Orangepizero_Ubuntu_xenial_default_3.4.113 All the programs I installed, which start from boot normally work, but I can not access via SSH. Is there any corruption of ssh files? Thank you for your help

I had to resolder the pins of the debug port on my NanoPi NEO Air and must have damaged the RX connection as I am unable to send commands but can receive read the debug output fine. Is it possible to change the debug port to UART1 or create another root terminal at another serial port?

Today I re-installed my Cubietruck as it was really outdated. It had: Linux cubietruck 3.4.105-cubieboard #8 SMP PREEMPT Fri Jan 23 06:11:42 EST 2015 armv7l GNU/Linux still running without issues. I reformatted the SD card with: ARMBIAN 5.65 stable Debian GNU/Linux 9 (stretch) 4.14.78-sunxi Configured everything and now I want to move the data to my SSD. (just as I had before) However dmesg shows me: cubietruck ata1: SATA link down (SStatus 0 SControl 300) What did i miss??

Hello, Has anyone tried to bring up a SIM7100E based hat on Orange PI Zero over the UART GPIO interface? I have enabled the UART ports in armbianEnv.txt as follows: overlay_prefix=sun8i-h3 overlays=usbhost2 usbhost3 uart1 uart2 dmesg | grep tty shows : [ 0.000379] console [tty1] enabled [ 1.765329] console [ttyS0] disabled [ 1.785581] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 39, base_baud = 1500000) is a U6_16550A [ 1.785700] console [ttyS0] enabled [ 1.810679] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 40, base_baud = 1500000) is a U6_16550A [ 1.835564] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 41, base_baud …

Because of my mistake After Update of kernel 4.19..... cubietruck don‘t Start https://r.tapatalk.com/shareLink?share_fid=1017055&share_tid=8857&url=https://forum.armbian.com/index.php?/topic/8857-After-Update-of-kernel-4%2E19%2E%2E%2E%2E%2E-cubietruck-don%E2%80%98t-Start&share_type=t I wan‘t To do a Backup of my Running System or a Image so i can Flash it on a other SD Card or restore the Backup Thank you Gesendet von iPhone mit Tapatalk

Hi, I have a BananaPi Pro with A20 cpu. I try to install Motion and Motioneye but it fails. I found some tutorials but nothing worked for me. Is there any proper tutorial about how to install it? Thanks.

I have OrangePi PC and I'd like to use HC-12 serial communications device. I've successfully used it with RaspberryPi Zero with these instructions: http://dev.drun.net/2017/05/10/reading-hc-12-from-rpi-and-sending-to-domoticz/ I've found this useful info: https://forum.armbian.com/topic/1524-orange-pi-one-how-to-enable-uart/ I've connected the HC-12 to OPPC as follows: VIN – Connect to 3.3 (PIN 2) GND – Connect to GND (PIN 6) RX – Connect to (PIN 8, UART0_TXD) TX – Connect to (PIN 10, UART0_RXD) I've got Putty connected to OrangePi. command "ls /dev/tty*" shows that I have /dev/ttyS0. I've tried to use it with Minicom: sudo…

Hello, I have an image based on Armbian 5.37 and I have noticed that after upgrading linux-jessie-root-lime2 from 5.37 to 5.60, the Lime2 was not able to get an IP for eth0. The only way is to execute dhclient eth0 I have noticed that a lot of file was added in linux-jessie-root-lime2_5.60_armhf/data/usr/lib/armbian and I think that one of them are responsible of this issue. Do you have any idea on how to fix that ? Thanks

Hi I am having issues getting an external RTC (DS1307) to work properly on the OrangePi + 2E I am using the current version of ARMBIAN 5.6.5 (Stretch) The hardware side of things works perfectly. If I use i2cdetect -y 0, I see the I2C bus transaction on an oscilloscope and I also see the device as shown 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- --…

I haven't had any luck getting the ov5640 camera module working with the nanopi air. I have compiled the latest dev version of bionic and enabled the ov5640 as a module in menuconfig. I currently cannot get it showing up under /dev/video* Any ideas?

Hi, how you decode video on Nanopi Duo with hardware acceleration? Have you any images or instruction how i could test hardware acceleration by using Nanopi duo? Mainline kernel doesn't support hardware acselleration, right? I tried build image with legacy kernal (3.4.x), but it doesn't run. Any ideas?

Hi, I'm testing the new Rev.K board and facing troubles with uplink performance. Downlink is ok. I already asked on Olymex forum but no response so far. $ iperf3 -c 192.168.0.110 Connecting to host 192.168.0.110, port 5201 [ 4] local 192.168.0.104 port 45700 connected to 192.168.0.110 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 3.59 MBytes 30.1 Mbits/sec 708 4.24 KBytes [ 4] 1.00-2.00 sec 4.14 MBytes 34.8 Mbits/sec 964 2.83 KBytes [ 4] 2.00-3.00 sec 4.19 MBytes 35.1 Mbits/sec 956 2.83 KBytes [ 4] 3.00-4.00 sec 4.16 MBytes 34.9 Mbits/sec 944 2…

Hi, I would like to run Armbian Stretch (mainline kernel 4.14.y) on Bananapi M1. Board has an issue - sd card detect pin is broken. In legacy kernel 3.4.y there was an easy workaround to change paramter sdc_detmode = 1 to sdc_detmode = 3 in /boot/script.bin file. How would I do this on 4.14 kernel which as I understand doesn't use script.bin anymore? I setup Virtualbox with Ubuntu 18.04 and I can compile image with default options. I only need guidance in what parameter and in which file to change.

Hello, Unfortunately as I read from forums mainline kernel has no driver for gc2035 and v4l2 driver. I have tried Armbian_5_65 and Armbian_5_59 debian stretch but they are not contains these drivers and eventually modprobe command fails. As I understand, I have 2 different solutions to run camera on my system; 1- Going back to legacy build. But I do not know how to go back the legacy build which is last supporter these drivers. 2- Installing required drivers. (Also I want to prefer this solution because going back to legacy build may cause some bugs) How can I install required drivers to mainline stable build and where can I find …

hdparm -t gives only 2-3MB/s for the internal mmc card. Any ideas? The card does over 80MB/s on my workstation.

Hi, There is a fresh new install. armbian-config fails with a message "There are no targets. Please check your drives". BOARD=nanopineo BOARD_NAME="NanoPi Neo" BOARDFAMILY=sun8i VERSION=5.65 LINUXFAMILY=sunxi BRANCH=next ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage System diagnosis http://ix.io/1sm3

In the last weeks I've successfully installed Armbian Debian Stretch 5.59 onto a Banana Pi M2 Berry, now I'm trying with a Banana Pi M1. From https://www.armbian.com/bananapi/ I've downloaded the Debian Stretch image and wrote it to my 4GB SD-card using Etcher (on Windows 10) - Etcher meant it was successfully after writing. I've safely ejected the SD-card from Windows, plugged it into the Banana Pi M, but it tries to boot from the network. Then I've taken a look at https://dl.armbian.com/bananapi/archive/ and downloaded Armbian-5.59 Debian Stretch image, wrote it with Etcher again, booted. Same issue. It shows a red armbian logo with "initializing boot loader…

Hello i have orange pi one, so i would like to connect my ipcamera into orangepi eth0 port and it should be accessable to internet over wlan0 my settings like this eth0 has static ip address 192.168.2.20 ipcamera has static ip address 192.168.2.200 wlan get ip from my home network router (dhcp) 192.168.2.210 my home router ip is 192.168.2.1 normally orangepi has internet access when ethernet cable unplugged, when i plug the ethernet cable i can reach ipcamera interface on browser by typing 192.168.2.200 but internet gone. also i've checked - Use this connection only for resources on its network - section at the …

Took me over a year to isolate this bug. Randomly, I have found that /boot/armbianEnv.txt had unconsistent content. Examples: .tty1tty1LOGIN.8 ¹[fU7ttyS0tyS0LOGINusbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u network={ ssid="Demaine_40_Grd_Rue_Chambre-BP" #psk="1234567890" psk=693d195a3bf2ab6defbcc0b54604ced4286a067996138db6dc793d8648f67d79 } usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u network={ ssid="fabste" #psk="1234567890" psk=95342031a4b28398045e1761f9c64f8454902e80d37102e5476fa…

Hello I have Opi lite 2 + 28byj-48 driver and step motor, and I want to play around, but can't find RPi.GPIO for OPi lite 2, how can I make it work ? I find pretty good example with raspberry pi http://www.raspberryproject.pl/en/automation/28byj-48-stepper-motor-raspberry-pi/ , I rearranged GPIOs to fit my board but I have error: File "testy.py", line 4, in <module> import RPi.GPIO as GPIO ModuleNotFoundError: No module named 'RPi' Welcome to ARMBIAN 5.67.181116 nightly Ubuntu 18.04.1 LTS 4.19.2-sunxi64