Allwinner sunxi

hi my kernel 3.4.113 from armbian my OrangePi Zero dont have poweron - button by default / i know system can wake up from gpios / IR signal / usb events / wakeonlan and another sourcec bu i try todo standby and wakeup after! withous any success (((( :/sys/power# cat state standby mem bootfast goto sleep echo mem > /sys/power/state or echo standby > /sys/power/state working fine ) but i cant wakeup system (((( i try gpio usb ir wakeonan what i do wrong ???? somebody can clarify my issue ??? my loaded modules lsmod g_ether 38598 0 ir_lirc_codec 3685 0 ir_nec_decoder 1556 0 lirc_dev 78…

Is it possible that there have been some image changes that broke the XR819 wifi completely? The available images for download on the Armbian page (5.3 server, and 5.4 minimal) as well as a custom built "legacy" branch linux-4.19 image all show the same behavior, The wlan0 interface is not active and it's not possible to bring it up. And dmesg shows that module has been initialized but not much more. Armbianmonitor support info: 5.3.9 official buster server image: http://ix.io/240Y 4.19.88 self-built, two days ago, legacy branch: http://ix.io/240U Everything below is from the official image, but the 4.19 image shows the exact same It is definitely not a h…

Hi, I'm back to China and got the NEWEST Orange Pi 3 at hand. But, it looks this new SBC has NOT been supported yet (please refer to https://www.armbian.com/download/?tx_maker=xunlong) ? Just expecting when will the armbian support for Orange Pi 3 out? Cheers Pei

Hello, I am trying to apply the following configuration to my nanoPi Duo Core: * Boot from eMMC * System on SATA/USB (disk) When i try to find the eMMC device using the command "fdisk", I can only see the SD card and the disk that I added. My NanoPi duo core contains the eMMC memory but I am unable to find it. In addition to that, If I try to execute the script "nand-sata-install", only one option is available : boot from SD, system on SATA / USB. The other two options : "boot from eMMC / NAND, system on eMMC/NAND" and " boot from eMMC / NAND, system on SATA / USB" are not mentionned. Can someone help me w…

Hello, I have a Orange Pi PC. I want to boot the system from usb. How can I do this with the armbian distro? Or can anybody give me a link to a tutorial. (sorry for my english, I'm french)

Hello everybody! How can I create access point with nmtui ? I spent some time playing with nmtui, and finally my nanopi got address something like 10.42.0.1. But it doesn't look normal, I can't create default gateway like 192.168.0.1 So, I couldn't see my hotspot from another device( android phone or other pc ) Maybe somebody resolved this problem?

I bought an orange plate zero pi that I requested for a project. The issue is that I can not start the AP mode. I am making use of the hostapd and isc-dhcp-server packages, apparently everything is well configured, I am thinking that the problem is the chip driver of the wireless network. I put some relevant data, from now on thanks. root@orangepizero:~# /usr/sbin/hostapd /etc/hostapd/hostapd.conf Configuration file: /etc/hostapd/hostapd.conf nl80211: Could not configure driver mode nl80211: deinit ifname=wlan0 disabled_11b_rates=0 nl80211 driver initialization failed. wlan0: interface state UNINITIALIZED->DISABLED wlan0: AP-DISABLED …

Hi, I am trying to use an Orange Pi Zero as a headless music player running MPD connected to a USB DAC. I have everything set up and it works well, but now I would like to add a momentary push button connected to a gpio pin to enable me to soft shutdown the Orange Pi Zero. I've done the same with python scripts that I've found in the Rune Audio forum (which runs on Arch Linux) for the Raspberry Pi, but I understand that the Pi Zero pins are different from the Raspberry Pi. This is the script I used on the Raspberry Pi #!/usr/bin/env python2 import RPi.GPIO as GPIO import time import subprocess GPIO.setmode(GPIO.BOARD) #Select unused GPIO header pin…

Hi all, I'm new here, and first of all I want to greet you. Last week I got a brand new Banana PI M2+, and tried to install the latest armbian Image on SD card. So far so good, but the M2+ is not booting from SD card. Except I short press the uBoot button followed by the reset button. This means I only get the board booted after a power cycle, if I press the uBoot button before. Then I tried to boot the board from NAND, but it is the same. It only boots from NAND, if I press the uBoot button before. (Installed to NAND before, of course) To verfy that I do not have any hardware issue, I downloaded a original Banana PI M2+ Image from the Banana-pi…

Is it possible to add some gpio chip select for support more than one chip select on board ? Loooked on https://github.com/armbian/linux ... ers/spi/spi-sunxi.c I am not found any support of gpio here. Also here https://github.com/armbian/linux/blob/sun8i/drivers/spi/spi-sunxi.h we can see that only one chip select can be used: /* About CS */ #ifdef CONFIG_ARCH_SUN8IW1P1 #define SUNXI_CS_BITMAP(ch) (ch%2 == 0 ? 1 : 3) #define SUNXI_CS_NUM(ch) (ch%2 == 0 ? 1 : 2) #endif #ifdef CONFIG_ARCH_SUN9IW1P1 #define SUNXI_CS_BITMAP(ch) (ch == 3 ? 7 : 1) #define SUNXI_CS_NUM(ch) (ch == 3 ? 4 : 1) #endif #ifndef SUNXI_CS_BITMAP #defi…

Hello, I have read a lot of posts, but I can't control the gpio pins on my orange one+ (Armbian buster-Linux 5.4.28-sunxi64). Currently I open/close the gate and other doors of my home through my Rpi 2 gpio and a 8 relay module, I would like to replace this with the opi, but I can't find the way. Could you help me? Thanks, Marco

Hello，Respected Developers： I'm an Orange Pi user.In the process of using the armbian, I encountered serious problems. My Control Board is Orange Pi PC Plus.Armbian is "ARMBIAN 5.59 stable Ubuntu 18.04.1 LTS 4.14.65-sunxi" I installed jdk and mysql.And run a JAVA program.I set a time zone for Asia-Chongqing,The system language is Chinese,I use three serial ports. When running for a period of time,There will be bugs.About one to three days. The specific phenomena are as follows: 1.Run "date",the time is 1978. 2.Mysql occupy cpu 195%, occupy mem 27%,systemd occupy cpu 34%,Another systemd occupy cpu 14% ,systemd-jo+ occupy cpu 39%. 3.eth0‘s ip disappear，Un…

I've installed Armbian again. Initially I logged in as root and 1234 password which worked. Then it asked to change the password. Something wen't wrong with it. My OrangePi PC boots fine and ok. When I open a terminal and try to do a "sudo this that" it asks my password and won't accept the one I gave, nor 1234. I've done the full installation a couple of times and same problem persists. How do I rest root password? The problem is that everytime I re-install everything and I'me at the very firts log (where I enter root and 1234) the screen scrolls so that I cannot see what it is asking since my monitor is 1600x1024. That I why I need to reset password afterwards. I…

Running apt-get dist-upgrade tries to install the new Allwinner H3 kernel but it takes the Orange Pi PC a really, really long time to extract and install it. The heartbeat LED flashed really fast and after 30 minutes I elected to stop it. Has anyone succeeded doing apt-get dist-upgrade today to get the new kernel on the Orange Pi PC or Orange Pi One, and, if so, how long did it take? The packages are: linux-firmware-image-sun8i linux-headers-sun8i linux-image-sun8i linux-jessie-root-orangepih3 linux-u-boot-orangepih3-default Thanks in advance for any information or advice.

Hello ! Aftert installing new image (Armbian_5.04_Bananapipro_Debian_jessie_3.4.110) onto Banana PI, I can't start desktop, startx command is not recognized. Neither root or normal user. Any idea wha't going on? Regards! Mladen, Herzegovina

Just FYI: By simply exchanging U-Boot and the board's .dtb file Armbian is able to run on a Banana Pi M2 which is based on the A31s SoC: http://www.bananapi.com/index.php/forum/general-discussion-for-bpi-m2/995-working-wifi-on-modern-kernels-4-1-tested?start=6 (comprehensive instructions for Arch Linux on the M2 available there)

Hi, I have a project to do and this consists of: Arduino board which work as frequency counter and OrangePi PC which will be some kind of server (mysql, python). The idea is to use UART port to communicate (send / recevie) datas from arduino to OrangePi using C, Java or python.. Here is my schema using LLC (converter between arduino and orangePC) (hope this will work ) Is there some example in C, python or java on how to use GPIO UART pin 8/10 on orangepi as serial port? For now I have installed library from: https://github.com/zhaolei/WiringOP and second for python from: https://github.com/duxingkei33/orangepi_PC_gpio_pyH3

Nice new board with AllWinner A64, quad core 64bit A53, priced at 25$ -> http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=159

Hello, Im currently working on making lima run with an original 5"-LCD on BananaPro. My problem is to make it work with the sun4i-drm driver. At boot everything works fine and the display shows u-boot and kernel outputs but when the kernel starts the sun4i-drm driver the display freezes and turns white after some seconds. dmesg says: [ 11.178221] sun4i-drm display-engine: bound 1e00000.display-frontend (ops 0xc09986d4) [ 11.178361] sun4i-drm display-engine: bound 1e20000.display-frontend (ops 0xc09986d4) [ 11.178858] sun4i-drm display-engine: bound 1e60000.display-backend (ops sun4i_backend_ops [sun4i_backend]) [ 11.179226] sun4i-drm dis…

Hi, tried to find files for motd but /etc/motd is empty. Can you tell me where to configure motd? Thanks

Hi, I noticed today that I'm getting those ARISC Errors again. I'm running the 5.05 server version which I ran apt-get upgrade on. I got the same when I tested out the new 5.10 image aswell. (Upgrading to 5.10 3.4.112 or using the new image wont let me compile the 'make scripts' either) [ 1424.305736] [ARISC ERROR] :message process error [ 1424.305763] [ARISC ERROR] :message addr : f004b840 [ 1424.305778] [ARISC ERROR] :message state : 5 [ 1424.305792] [ARISC ERROR] :message attr : 2 [ 1424.305805] [ARISC ERROR] :message type : 30 [ 1424.305818] [ARISC ERROR] :message result : ff [ 1424.305831] [ARISC WARING] :callback not install [ 1424.305849] [cpu_freq] ERR…

Hello! I tried to configure built-in wifi module to work as two wifi interfaces at the same time. I had already configured hostapd+dhcpd at the first interface, at the second interface (...iw add interface...) I could scan my home wifi network (wpa2), but I couldn't connect to it (wrong key). I used utilities to connect like wpa_cli, wpa_supplicant, iwconfig, iw. Did anybody done that, I mean is it possible? What i'm doing wrong?

Hi All I'm having some problem with a fresh install of version 5.30 but had the same problem with 5.27 on my Orange Pi Lite. On reboot, I can SSH into the device with no problems. but after a while connection hangs. If I wait a while after a reboot I can't SSH into the device either. I also can't ping the device after a while. Using the network manager, if I disable and then enable the wifi then everything works for a while. I have checked that the power Managment of the wifi is off. The whole time I can still browse the internet from the device with no problems. Any ideas on where to look …

How to run a python script at startup on orange pi zero? Thx!

Hi, I cannot find how to install PHP7 on my OrangePiPC 3.4.113-sun8i I installed apache and mariadb by "apt-get install apache2 mariadb-server mariadb-client mariadb.common" but how do I install PHP7? thanX advance, Antonios

Hi, So far was working with headless Armbian images. Now I need to attach an HDMI monitor to my OPi ONE. Generated a desktop Armbian 5.24 jessie kernel 3.4.113, attached the HDMI monitor and booted. I saw the inital seconds of U-Boot logging the discovery of the monitor and a few other things and then it went blank. I guess after some reading in the forum that there is no display manager included in the distro or is there some other problem? Is there some build option that we could include a manager (eg KDE/XFCE/etc) in the image generation proccess? Or if there is any guide that gives steps for adding a display manager in Armbian to a not-so-knowledgab…

I have two Orange PI +2E machines. The first one I got was a while ago so it's running a 3.4.113 kernel (16.04), the more recent one I purchased is running 4.19.13 kernel (18.04) - both are Ubuntu Armbian. I've noticed when I use the "shutdown now" command on the older pi, the board actually powers off but when I use the same command on the newer kernel board, it never powers down. The newer board appears to stop all services and eventually report that the system is halted but it remains in that state. Is there a way to enable it to power off after a "shutdown now" is issued? I'm wondering if this is a kernel difference but it may be something else completely. …

New toys to play The NanoPi Neo Core and Core2 are the Core-PCB without Connectors. Only Pin-holes in 2.54mm Pitch. But as the Pictures did show - there will be a Docking-Board like on the NanoPi Duo The price for the normal NanoPi Neo jumps from $7,99 to $9,99 and the new Neo Core now costs $7,99 (256MB and no eMMC) BUT has optional - also like the Neo Core2 (here 8GB default) - 8GB eMMC (512MB and 8GB eMMC = +$10 on the $7,99 Neo Core) The Neo Core2 does cost $24,99 but do have 1GB of Ram and (default) 8GB of eMMC (more options later). (long description show also - a obsolete? - option for only 512MB. But the board…

I use "Semi_Armbian_5.07_M3", how can I mount blank SD? When I boot from eMMC with blank SD inside - System will not start (First boot A83T is from SD) , When I plug when the systen is already running - is not recognized. Do we need 'redirector' on SD-Bootsector? (like PC+ Floppy Disk) ? After inserting the SD: root@BananaPiM3:~# fdisk -l Disk /dev/mmcblk0: 7,3 GiB, 7818182656 bytes, 15269888 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x000ac9e8 Device Boot Start End Sectors Size Id Type /…

Hi all. I have a board nanopi neo air with armbian linux on it. We with my colleague try to setting up ffmpeg with cedrus264 for hardware accelerated capturing video from ov5640-like camera device. There is my armbianmonitor. There are my v4l2-ctl -d /dev/videox -D out: Spoiler Driver Info: Driver name : cedrus Card type : cedrus Bus info : platform:cedrus Driver version : 5.4.51 Capabilities : 0x84208000 Video Memory-to-Memory Streaming Extended Pix Format Device Capabilities Device Caps : 0x042080…

Hello, since I upraded from Armbian Strech 5.60 (kernel 4.14.84-sunxi) to Armbian Stretch 5.70 (kernel 4.19.13-sunxi), I can't get hostapd to work on my Cubietruck. When I modprobe the brcmfmac module, I get the following lines with dmesg: [134591.243266] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 [134591.523515] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 [134591.523658] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43362-sdio.clm_blob failed with error -2 [134591.523665] brcmfmac mmc1:0001:1: Falling back to syfs fallback for: brcm/brcmfmac43362-…

After installing armumian-5.83 on Banana pi M64 and starting it, kernel error is output and restarted when executed from start or ansible. Spoiler k8s-work4 login: [ 20.668532] WARNING: CPU: 2 PID: 0 at lib/timerqueue.c:79 t0 [ 20.676119] Modules linked in: zstd zram brcmfmac brcmutil snd_soc_hdmi_codex [ 20.715677] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.1.0-6 [ 20.723854] Hardware name: BananaPi-M64 (DT) [ 20.728121] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 20.732913] pc : timerqueue_del+0x64/0x70 [ 20.736923] lr : __rem…

Hi, I've tried to set up my new cubietruck with Igor's Debian-3.8-wheezy-4.0.4 image but first, it can't bring up eth0 and then gets stuck at restarting sshd. Tried rebooting and powercycling 4-5 times, always the same... Any ideas? Or should I use another image or kernel? If yes, which one? Many thanks and best regards, cibomato

The orange pi zero has a USB OTG interface, which can be used to interact with it in the absence of networks and spare USB-UART converters. This is not enabled by default in the Armbian image. Here I describe how to modify the system image before first boot to enable this. First, mount the freshly written SD card on a linux computer, become root, and change directory to the mount point, that is, the root directory of the SD card. The following couple of steps were taken from https://oshlab.com/enable-g_serial-usb-otg-console-orange-pi-armbian/which describes how to enable this in a live system, i.e. after first boot. The steps are modified to work on the moun…

Hello, I installed the Ubuntu desktop image from: https://www.armbian.com/orange-pi-pc/ to the SD Card with: sudo dd bs=4M if=Armbian_5.38_Orangepipc_Ubuntu_xenial_default_3.4.113_desktop.img of=/dev/sdb conv=fsync The orange pi does not boot, it took some time and the red LED is flashing on the top side and the screen is black. Maybe I did something wrong? Regards, caro

Hello I have a problem with my Xunlong Orange Pi PC Plus, if I put an SD card with Armbian_20.11.3_Orangepipcplus_buster_current_5.9.14 or focal (format with Etcher) it will boot with the MMC is not with the SD card i have an error Trying to boot from MMC1 ... MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment ... mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr ... EHCI failed to shut down host controller. Loading Ramdisk to 4969c000, end 49fff9c3 ... OK Loading Device Tree to 4962b000, end 4969bfff ... OK Starting kernel ... and after…

I have just downloaded and installed a fresh Buster Image (Armbian_20.11.3_Orangepi3_buster_current_5.9.14.img). After configuring the root password and the new armbian user, I have tried to update the system using (apt-get update....) But I noticed that there is no internet connection through the ethernet cabble. The command ethtool eth0 says that the link is detected. When trying to activate the Wired connection using "nmtui", the system says: could not activate connexion: Activation failed: IP configuration could not be reserved (no available address, timeout, etc.) Could you assist me to resolve this problem. Note: 1-Th…

Hello, I changed my memory card from a 8GB one to a 16GB one and I moved everything with Win32DiskImager, by reading the old one and writing to the second one. Can I expand my filesystem like on the first boot? Im running Jessie on a Orange Pi Zero. Thank you.

Hi everybody, I have orange pi zero h2+ 512mb ram and I need to use 3 uart to run my c code. I can use UART1 on pin 8-10 and UART2 on pin 11-13. I also want to use UART0 in my program but it is attached to console. How can I disable the UART0 console to use it as normal TTL serial? Thanks

Hello! I am on the forum to ask you some questions that I am not able to find the answers to. I bought a 3D printer kit on Aliexpress.com including an Orange pi 3 LTS board. On the card there is an operating system installed and several applications for the printer. The first problem is that: I would like to activate WIFI on the card. I tried to do this via 2 different ways. The first is with the following command sudo orangepi-config. I go to the network/wifi menu. I chose my WIFI network. I enter the network key and I receive the following error code: Could not activate connection: Activation failed: IP configuration could not be reserved (not available addres…

Hi all, I'm a n00b e to the SBCs and linux I've bought my very first SBC:orange pi PC, and it arrived the day before after some struggling with the "connection refused" error (just resolve it by opening the remote login inside preference>sharing on my macOS 10.12) I finally enter the login screen, and use the command "ssh root@169.254.134.132" to my terminal it denied my password request I'm sure the password I've used is 1234, but whatever I used this, or restart my computer, using the desktop version, even changing other workable SD card, it still get the same result. (I'm not going to use the nightly version, seems it doesn't get any end sup…

Hello, running ARMBIAN 5.59 stable Debian GNU/Linux 9 (stretch) 4.14.65-sunxi on Banana Pi pro /var/log is always full df -h /dev/zram0 49M 48M 0 100% /var/log root@mail:/etc# zramctl NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram0 lz4 50M 47.5M 7.8M 8.4M 2 /var/log /dev/zram1 lz4 249.7M 4K 63B 4K 2 [SWAP] /dev/zram2 lz4 249.7M 4K 61B 4K 2 [SWAP] Since i am running on sata (ssd of 128gig) i dont need that. Cannot find how to stop the mount of /var/log on /dev/zram0. Not in fstab. Want to use the real /var/log from / (root).

I just checked the mali blob: mali450r5p001rel0linux1fbdevarm64v8a (fbdev) and this blob is working on the legacy kernel with the proper patches. Nevertheless we may have some stability issues at the current voltage/frequence; Indeed gl-mark2-es-fb crashes around the refract test on my board.

This may be one of those questions that should be considered dumb, but I'll risk your flames and ask regardless. Is the Orange Pi ONE GPIO Pin layout the same as the Raspberry Pi? I haven't found much specific to GPIO on the Orange Pi One, but I did see someone who said they were flipped 180 from the RPI. Before I attach a project and risk frying project and./or board, could you point me to a reference that specifies the layout of the GPIO pins on the Orange Pi ONE? And, like I said, I'm really sorry if this is the dumbest thing you've had to read all day. I have searched, but could not find much specific to the ONE.

Hi, I have tried to run Armbian_20.05.1_Orangepizero_focal_current_5.4.43.img.xz but it doesn't work, see here: U-Boot SPL 2020.04-armbian (May 30 2020 - 18:49:32 +0200) DRAM: 256 MiB Trying to boot from MMC1 U-Boot 2020.04-armbian (May 30 2020 - 18:49:32 +0200) Allwinner Technology …

Hello everyone, I've been trying to find a list of the differences between Armbian and a classic Debian Install. Could you please help me with that? I'm asking this question because I currently have Armbian running from an SD card on a Cubieboard 1, and would like to install Debian to an encrypted SATA drive instead. I think I will follow this installation guide with the netboot SD card image. Once I have a Debian for the armhf arch, is there something else I should do to make my system as compatible as possible with the Cubieboard? I know I can reduce the amount of reserved memory assigned to various video devices. I could maybe try to look into the Security …

Hello, just installed R1 image, solved power issues as described on this forum and now trying to configure it as classic home router. So I got a problem configuring DHCP server - system works in interfaces.r1 mode that means lan and wlan are bridged to wan. Wlan and Lan interfaces configured as manual that is not very handy, so I need to install DHCP server and make some NAT. And here goes a problem - I am not very skilled in linux networking and cant figure out how to combine NAT and R1 interfaces to get classical router behavior (externalDHCP-WAN-NAT192.168.0.1-internal DHCP-LAN and WLAN DHCP clients). Can someone give me directions? Maybe there is a way to install som…

Hello! I have installed Igors Debian Wheezy Kernel 3.4.108 image on SD-Card for my BananaPi Pro. All is fine, thanks Igor! (after changing to Sandisk) But I can't activate the onboard Wifi-module. sudo modprobe ap6210 brings error: FATAL: Module ap6210 not found I tried a lot of thinks, but no result: root@bananapi:~# lsmod Module Size Used by cpufreq_userspace 3524 0 bnep 14462 2 bluetooth 264185 7 bnep brcmfmac 96909 0 brcmutil 4800 1 brcmfmac spidev 6366 0 I can activate the Lemaker 5'' touchscreen an the I2S-Audio in the script.bin-file, but no Wifi…

Hi, I have just upgraded my BananaPi from Lemaker's Lubuntu 3.4 kernel to the latest Armbian with kernel 4.9 and I can't enable 1-wire to read ds18b20. I suspect the enabling procedure has changed? What I did was: 1. bin2fex /boot/script.bin > script.fex 2. vi script.fex Appended this section exactly as it was on my previous Lemaker kernel 3.4: [w1_para] gpio = 4 3. fex2bin script.fex > /boot/script.bin 4. reboot 5. echo 600000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 6. modprobe w1_gpio 7. modprobe w1_therm 8. ls /sys/bus/w1/devices/ empty answer In the "known is…

kindly help me to mount usb devices. I have wifi stick, usb sd. nothing detects on latest deb jessy.5.05

Hello. from Bulgaria. I want to ask you, do you know if there is newer version of nodejs tnah 0.10.29, because this version don't have child_process.spawn that can directly pipe both input and output from some process. Thank you in advance!

I'm trying to configure the CS (Chip Select) pin on my Orange Pi Zero 3. I added overlays=spi-spidev to the /boot/armbianEnv.txt file, created my own dtbo file, and tried all possible methods suggested by ChatGPT. I've been struggling for two weeks with no success. I haven't been able to switch the CE1 pin to alt4 state; it only stays off, nothing else. Is it even possible to work with SPI on this board?

Hello everyone. This happens on my OrangePi after a couple of hours of running. I don't think this happened before installing the kernel 4.14. I haven't changed my power supply, which should be working well - custom DC/DC converter connected to GPIO pins. Is anyone else experiencing this? Anything I can do? [19155.760977] INFO: rcu_sched self-detected stall on CPU [19155.760983] INFO: rcu_sched self-detected stall on CPU [19155.760997] INFO: rcu_sched detected stalls on CPUs/tasks: [19155.761010] 2-...: (1 ticks this GP) idle=18a/1/0 softirq=332295/332295 fqs=0 [19155.761017] 0-...: (0 ticks this GP) idle=dbe/1/0 softirq=475103/475103 fqs=0 [19155.761018] […

I was unable to get UART working on my Orange Pi Zero. Note, that I am not trying to use UART to access the terminal, I need to use the UART port to say connect to an arduino, etc. Here is the output of some commands that I thought may be helpful. uname -a Linux orangepizero 4.10.0-sun8i #14 SMP Fri Feb 24 03:02:58 CET 2017 armv7l armv7l armv7l GNU/Linux dmesg | grep TTY [ 0.000000] Kernel command line: root=UUID=b5fc390b-23ef-47a8-83fb-0fd94a3d2dcc rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 cgroup_enable=memory swapaccount=1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1 ubootpart=8b70…

I wanted to new install my Cubietruck with the new Jessie images. But how can i install to boot from Nand and SSD. Can´t find nand.install.sh Is this gone? Why? Thx Thomas

Has anybody a good latency after the RT-PREEMPT patch? I'm using Orange Pi One (H3), Ubuntu Desktop and legacy 3.4.113 kernel patched with 30-real-time143-full-plus-rt-fixes.patch. Also I have the isolcpus=3 enabled. And latency test results for this config is master@orangepione:~/rt-tests$ sudo ./cyclictest -a -t -n -p99 # /dev/cpu_dma_latency set to 0us policy: fifo: loadavg: 2.18 2.49 1.19 1/299 3693 T: 0 ( 3034) P:99 I:1000 C: 364441 Min: 7 Act: 31 Avg: 23 Max: 3655 T: 1 ( 3035) P:99 I:1500 C: 242985 Min: 7 Act: 32 Avg: 23 Max: 3578 T: 2 ( 3036) P:99 I:2000 C: 182252 Min: 7 Act: 43 Avg: 20 Max: 2198 …

Hey. I got an orange pi zero + 2 that I'm trying to run armbian on. I've downloaded the both the ubuntu and debian server, and installed to the sd card using Etcher. It boots, but when the boot process reaches "starting kernel", it reboots, and keeps in that loop. Here's a link to a screenshot of what's shown on screen just before it reboots: https://www.dropbox.com/s/xt6ebsdzi0nkf19/Fil 19-02-2018 18.12.04.jpeg?dl=0 I've also tried the images listed on orange pi's own website. They boot up fine to a working desktop. Any help?

So can you guys help me debug, why I can't get the microphone to work on my Orange pi pc. Speaker works just fine. Arecord records nothing, silent file . Here is some terminal output: msev@orangepipc:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 msev@orangepipc:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 car…

Hi, Did anybody play with Cedrus on the recent kernels? I'm going to play with it on Bananapi m1, kernel 5.4 and Ubuntu Bionic. Should I just got step-by-step using this instructions http://linux-sunxi.org/Sunxi-Cedrus ? The goal is to evaluate whether this is suitable solution for video surveillnace. I'd used kerberosio with an IP camera for couple years and this does not work good with motion detection.

I booted up my OPi0 + $2 expansion board this weekend after reading through the doc on it warning about TVout problems. Used the legacy Xenial 5.25 build available. I used the USB-serial method and logged in from my PC via SSH later over WiFi. On the TV there was no desktop GUI display, just the regular login prompts CLI. So this is not a RCA composite cable issue, but likely a display one...my TV is 720p. 1. On the TV I just got the login prompt after the text based Orange Pi Welcome screen. After logging in it stays text, as if I were in Terminal. I tried to install: $sudo apt-get xorg lightdm xfce4 tango-icon…

Hello, In additional items of v4.1, auto system update via repository apt.armbian.com You have written and has been added, if you have upgraded from v4.0, source.list of apt does not seem to have been updated. If the contents to be updated would be what kind of configuration information? I want you to tell me. Environment: -Debian jessie 4.1.4 -Cubietruck Best regards.

I have an issue with the latest releases since Yammy on a Orange Pi Zero LTS. Reboot is not working (system shuts, but not starting again)

Hi, Firstly my thanks to the team for an outstanding job on ARMbian. I'm relatively new to this particular flavour, using it on my Orange Pi H2+ board with a few different builds under my belt now. Recently I have been having some troubles getting Pi-hole to work on the little Orange Pi board. Twice I have had it up and running perfectly, with full DNS and DHCP control of my home network, accommodating about 10 devices. However after about 6 - 12 hours of operation, they ceased to function. First time around I was not home to witness it, but when I returned later, the Allwinner chip was running pretty warm (around 60 degrees C core temp) and non-responsive, even to s…

TRYING TO CLONE EMMC FROM ONE NEO CORE INTO ANOTHER. I found this link below : https://github.com/zador-blood-stained/fel-mass-storage I still don't know if it works since i had to enter FEL MODE which i could not. maybe i am trying in a wrong way. SO how could i get a clone EMMC of nanopi neo core (taking into consideration it might not have FEL mode)? but if it does then how to enter this mode? and how to run this clone on another nanopi neo core?

Hi, I have installed the phoenix suite on a windows seven 64 bits. I start the phoenix suite et make the cubietruck in the mode to flash the nand. Phoenix Suite detect not the cubieboard. It's normal ? How transform your raw file in .img because the phoenix suite accept only the img file ? Is there another method to flash the nand ? Thanks François

FriendlyARM has recently launched a new board in its NEO family: NanoPi NEO Plus2 As of Armbian_5.32.170704_Nanopineo2_Ubuntu_xenial_dev_4.11.8.img, few things aren't working: out of 1GB RAM, only 512MB is visible the USB socket closer to the edge (USBN1) is not visible, even with overlays Wifi and Bluetooth are not visible (AP6212A) (it's not a complaint, but just a statement

Hi, I just wanted to report this bug. Latest Armbian Buster images for OPi Lite 2 don't work. When they're booted up, it takes 30 seconds for the device to freeze completely. The screen, keyboard, network, everything is frozen after less than a minute. I downgraded to a release from a month ago and it boots up correctly.

I would like to save the pain of all the newcommers in setting up the hotspot on their OPi ZERO. Please note, that the wifi module on this board is crappy and the available driver is barely working. The AP function is left enabled in the beta builds. You can read about it here: thread about the wifi module I am not a dev or any highly experienced user. I tested this step by step with my Orange Pi Zero 256MB, board rev. 1.1: 1) download the image from dl.armbian.com: Armbian_5.35_Orangepizero_Ubuntu_xenial_default_3.4.113 2) write it to your SD card 3) SSH to your OPi Zero 4) run as root armbian-config 5) navigat…

Hello everyone, newbie here just starting with armbian Recently I bought a cheap orange pi zero and I cannot connect via ssh through wifi. I read multiple threads regarding that issue however I cant say I understood everything I read. So, in a nutshell, is there any solution available? As many users reported, I can connect via ssh over etherner or wifi when ethernet is plugged in but not when only a wifi connection is available.

Is possible with the last version of Debian to have internal Wi-Fi and Ethernet working simultaneously on Banana PRO? I want to try some "bonding" network benchmarks. Thanks.

I feel like I have been here before..... I'm trying to get Netatalk working on my OrangePiOne and OrangePiPC. No luck again I have build a custom kernel with only appletalk extra as a module ( appletalk.ko) and used the then created package: linux-image-dev-sun8i_5.24_armhf.deb to install this over an image of the beta images site for an orangepizero. Armbian_5.24.161226_Orangepizero_Ubuntu_xenial_4.9.0.img The OrangePi boots perfect and I see the new kernel active: Linux orangepizero 4.9.0macippi-sun8i-g21ddf78-dirty #2 SMP Fri Jan 6 20:08:41 UTC 2017 armv7l armv7l armv7l GNU/Linux Installed Netatalk after this and it is running fine...only no appletalk or AFP…

hello, im use ARMbian on bpi m2 and will programming the gpio with python. i have tested with this little script, but i become a runtimeerror. i can not use the RPI.GPO. What can i used to programming GPO with Python under bpi m2?

Hello all, I'm working on a project where I need at least 460800 baud on a UART on the NanoPi Neo Air. Works great at lower baud rates but can't seem to get it much faster than 115200. Any thoughts on clock adjustment or CPU speed? I'm using Armbian 5.24 with the 3.X kernel

Hi, I'm Rosario and I'm a new Armbian follower. I liked it. After months using my OPI Plus2 with Ubuntu Jessie Loboris image (and installed it also on emmc) I decided to install Armbian. I need to say last time I installed OS on emmc I received an error. Erase was fine but copy of last jessie Image no. After that I Installed Armbian Image with no problem and after some reboot OS run up fine. I downloaded last Armbian Image (3.4.112 kernel version). Now, when I try to use emmc I receive some error. First of all seems it's missing. I see only mmcblko (my SD card). emmc doesn't exists: root@orangepiplus:~# cat /proc/partitions major minor #…

When I login on the console, there is this display with a bunch of information, including the CPU temp. I have need to keep track of my CPU's temp, since it seems to be overheating (I have a heat sink on it, but does not seem to be enough -- I have a fan on order). I want to be able to check the temp from time to time, so I would like to run at least the part of the login banner program. What program is that? I am not seeing anything obvious in /bin.

Hi All, Sorry if this has been asked before, I haven't been able to find the answer yet. I wish to configure my OrangePi's (Lite and PC+) such that they power on automatically whenever the power is restored after a power outage without needing to press the power button. I'm not sure where we could configure this as the OrangePi's don't seem to have a bios like a Desktop PC. Dave.

Hello, I'm using the Wheezy Image with Kernel 3.4.107-cubietruck, downloaded 25th May 2015, on my Cubietruck. Working through the Guide "Enable Access point mode" I ended up having a running hostapd with a ESSID which my clients can see but can not connect. I tried with default config given by the image (ssid=cubietruck and wpa=2 with wpa_passphrase=12345678). I also tried disabling wpa (wpa=0). But no client can connect. Starting "hostapd /etc/hostapd.conf" prints root@cubietruck:~# hostapd /etc/hostapd.conf Configuration file: /etc/hostapd.conf nl80211: Could not re-add multicast membership for vendor events: -2 (No such file or directory) Using inte…

Hello I had installed on my lamobo-r1 as of this afternoon, armbian 5.20... I then decided to upgrade to 5.23 and after that networking went haywire... nothing worked anymore "swconfig list" showed nothing as if module for the broadcom switch wasn't loaded After the last buggy updates I'm almost afraid to upgrade anymore... what if anything else breaks in the process Right now I'm back to 5.20 with hold on "linux-dtb-next-sunxi linux-firmware-image-next-sunxi linux-headers-next-sunxi linux-image-next-sunxi linux-jessie-root-next-lamobo-r1 linux-u-boot-lamobo-r1-next" Very bad "puttycat"... quite sad actually I was really hoping some improvement since I do…

Hey everyone, First off, I don't use Linux often so please bear with me if I miss out on obvious things. I have a few Orange Pi Lite boards, and after booting up Armbian 5.14 I was excited to give the Wifi a try after only having ethernet on my Orange Pi One boards. My OPi Lite sees my network just fine, but when I put in my credentials and go to connect to it, it fails returning "Bad Password". For what it's worth, I've checked the password probably 25+ times, I promise it's right. The wifi WILL connect to open networks, however. Is there some obvious solution that I'm missing here? Any help or direction would be appreciated. Thanks!

So iwe been trying to solve this issue by experimenting and iwe hit a wall where i do not know what to do so i guess i'm just hoping someone would spot what i'm doing wrong. So i bought an "Orange Pi PC" from ebay and i'm trying to set it up without much sucess. I downloaded the "Armbian_5.14_Orangepi2_Ubuntu_xenial_3.4.112.raw" image from the armbian webpage. ( I also did my Cubieboard wich worked fine with the same steps. ) The commandline i used to write the image to an sdcard is this: sudo dd if=./Armbian_5.14_Orangepi2_Ubuntu_xenial_3.4.112.raw of=/dev/sdc bs=1M oflag=direct sudo sync And then i unplug the sd card and put it into my OrangePi and when it boots the g…

The Orange Pi Zero +2 H3 with USB hat will hard lock up on boot at "Starting Armbian Hardware Monitoring" when booting the latest (and at least one previous) available Buster (and Bullseye) images over HDMI console. Tested on multiple SD cards with the same result. (I will test with serial later, I do not have the time to remove it from the case at the moment; I figured I would post it now in case anyone had a chance to check before I could.)

Hello, I have installed ARMBIAN 5.60 stable Debian GNU/Linux 9 (stretch) 4.14.70-sunxi on a Banana Pi M2+ and I need to read and write to the GPIO pins from a bash script, does anyone have a workable solution? I tried with an Orange Pi in the past and I compiled a binary to access the gpio values but it did not work and I cannot find that source any more. Thanks in advance.

Hi, I understand that powering the Orange Pi Zero through the USB OTG interface is convenient but suboptimal due to low power, especially if you have other devices attached to the board. I've seen recommendations that powering the board directly via the 5V and GND on the GPIO from a clean and sufficiently powerful power supply is preferable. I know in theory what needs to be done but I don't know how to physically connect to the board. The GPIO is a 2x13 row of conductive holes in the board. (Is there a name for this sort of thing, by the way?) Say I have two wires, 5V and GND. How do I physically attach a wire to one a hole? Do I need to …

Hi, i am using orangepi PC (H3). i had tried follow link, test.mp4 file created successfully. (video fine). https://github.com/avafinger/ffmpeg_cedrus264_H3 now, i want to real time(20~30 fps) capture for /dev/video0 (gc2035). i tried mpv with gc2035, but it didn't worked. i want real time video capture using cedrus264. orangepi@OrangePI:~/tmp$ mpv tv:// Playing: tv:// [tv] Selected driver: v4l2 [tv] name: Video 4 Linux 2 input [tv] v4l2: your device driver does not support VIDIOC_G_STD ioctl, VIDIOC_G_PARM was used instead. [tv] Selected device: sunxi-vfe [tv] Capabilities: video capture read/write streaming […

Hello, i have an usb ethernet adapter recognized as (lsusb : Bus 005 Device 002: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) DM9601 Fast Ethernet Adapter which is recognized and running fine on linux mint 17 ( kernel 3.16.0-38 - 52 ubuntu 14.04.01) but i can't find a way to make it work on any distro on OPi Lite. 1/ i tried nightly armbian xenial ( Armbian_5.27.170327_Orangepilite_Ubuntu_xenial_dev_4.10.3) , it ended up with a continuous message , a kind of kernel panic : [22.272075] dm9601 5-1:1.0 enx00e04c534458: kevent 4 may have been dropped 2/i tried armbian 3.4.113 and followed all instructions in this po…

I use the Armbian_5.45_Orangepizeroplus2-h5_Debian_stretch_next_4.14.44.img. I want to use a sensor based on the spi protocol. In armbian-config i enable the spi ,the armbianEnv.txt like this: verbosity=1 console=both overlay_prefix=sun50i-h5 overlays=i2c0 i2c1 spdif-out spi-add-cs1 spi-jedec-nor spi-spidev uart1 uart2 usbhost2 usbhost3 rootdev=UUID=bb48b498-7bd1-4018-b77d-ba00fa61a33d rootfstype=ext4 param_uart1_rtscts=1 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u But in /dev on spi-dev root@H5:~# ls /dev/s shm/ snd/ stderr stdin stdout Is it because there is no code adaptation spi-dev? if not ,I want to try to transplant th…

/var/log/Xorg.0.log: [ 59.326] (EE) AIGLX error: sun4i-drm does not export required DRI extension [ 59.550] (II) IGLX: Loaded and initialized swrast [ 59.550] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 59.550] (II) Initializing extension XFree86-VidModeExtension [ 59.551] (II) Initializing extension XFree86-DGA [ 59.553] (II) Initializing extension XFree86-DRI [ 59.553] (II) Initializing extension DRI2 [ 59.564] (II) modeset(0): Damage tracking initialized [ 59.565] (II) modeset(0): Setting screen physical size to 508 x 285 [ 60.561] (II) config/udev: Adding input device sunxi-ir (/dev/input/event1) [ 60.561] (**) sunxi-ir…

I am trying to control a relay board on OPI PC plus - armbian. I have used "orangepi_PC_gpio_pyH3" module in python before to control leds, buttons and an 16x2 LCD. This is the relay. To control the Relay module i connected VCC to 5V, GND to ground and IN to PIN 35 (Which is PA10 on my board). and used the code below to open or close the relay just to test but no luck. The code does not return any errors, it runs and finishes but no activity on relay. Both leds (Red and Green) on relay are on when connected. Any help would be appriciated.

I install Debian jessie vanilla kernel 4.1.6 At the first loading gives out a mistake: failed to bring up eth0. Ip the address isn't given on dhcp. But on my router it is specified correctly. I can't change settings. First start. the system expects reset and connection. That it is possible to make in this case. Repeated reset and expectation doesn't yield results. The keyboard doesn't work

Hi! I look for this topic in every place at the internet but all of the topics are not related with my problem. I have a custom board based on the Lime2-emmc. It can boot from SD, but when I tried to copy the same u-boot-sunxi-with-spl.bin to the emmc and try to boot, nothing happends, the screen is empty. dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk1 bs=1024 seek=8 boot from SD http://imgur.com/a/OHxzm When it boots from SD the u-boot shows both (SD on MMC0 and EMMC on MMC1) I´m using the A20-OLinuXino-Lime2-eMMC_defconfig with some mods to my board. My emmc is unit is KLM8G1GEME-B041 and is connected to the board like the emmc unit is connected…

Hi, I need to use uart (for a gps receiver) and i2c (for some sensors) for my project via the gpio pins. Fortunately i2c is enabled in the images by default. I hope it is also enabled if I recompile armbian for the orangepi lite by default? Afaik I have to enable UART in the following file: https://github.com/igorpecovnik/lib/blob/master/config/fex/orangepilite.fex . Unfurtunately I do not understand which pins on the gpio header correspond to the ports defined in this file. For example: Can I use UART on any pins on the gpio header? I would like to use UART on the same pins as in https://www.element14.com/community/servlet/JiveServlet/previewBody/73950-102-10-…

U-Boot SPL 2018.11-armbian (Feb 08 2019 - 08:51:22 +0100) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2018.11-armbian (Feb 08 2019 - 08:51:22 +0100) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: LeMaker Banana Pi I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** Setting up a 720x576i composite-pal console (overscan 32x20) In: serial Out: vga Err: vga SCSI: SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst …

Hello. I have a problem with Orange Pi Zero LTS. I also have an expansion board and the required 3.5-jack cable. I have read many different forums and sites where people have described problems with video signal output. Often there are solutions such as: 1. Editing the file /boot/script.bin But this file does not exist. 2. They also talk about the launch of "tv". You need to add an entry to /etc/modules. But that doesn't work either, since ./tvout doesn't exist. As I understand it, in new versions there is no TV support, but there is no way to download old versions either. The latest version that can be downloaded is 5.59,…

I keep my Lime2 updated with apt-get update/apt-get upgrade, but it does not upgrade the u-boot, that is still an old version: U-Boot SPL 2015.07-armbian-sun7i (Oct 11 2015 - 17:17:10) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Because the network speed is not that fast, I suspect this could be solved with a more recent u-boot. How do I update the Lime2 bootloader to a recent u-boot without re-downloading an image and re-installing all my software and data? It looks like there is already a recent u-boot.bin file on the system... # ls -l /usr/lib/nand-sata-install/a20/bootloader/linux/ -rwxr-xr-x 1 root root 152 May 23 22:35 linux.ini -rw-r--r-- 1 root…

Which is the maximum current delivered by the pin 5v of the gpio in an Orange Pi LITE? I would like to connect on it some sensors that needs 5v power supply. Thanks

Hello It is funny that new kernels going out and kill what developers have made working on older kernels.. For example I have had no issues with GPIOs pull up in 5.1.15-sunxi64 kernel. On Kernel 5.1.15-sunxi64 I do not get those errors; Python: GPIO.add_event_detect(31, GPIO.RISING, callback=count1) RuntimeError: Failed to add edge detection I didnt have any issues with Kernel 5.1.15 but I cannot recreate it anymore. Maybe this will help to give a clue of what is happening: at 5.1.15 kernel: In ArmbianEnv.text I have enabled the w1-gpio: param_w1_pin=PC7 (PC7 Is GPIO-71) …

Hello guys, I have an BananaPi M1 board runing armbian 5.31, already installed apache and mysql months ago, also an sata drive and the box is running smooth, I have alot of sensors around the house that are pushing new values to my mysql database, every minute, or every few minutes, but now I want to setup my cameras to use the FTP to store images in a folder accessible by apache, when cameras detect motion, can you point me in the right direction to install a FTP server I want to be able to see all the images saved by the cameras, in my dashboard, a website I made and host in this BananaPi box.

I'm trying to get an nrf24l01 radio to work on my Orange Pi One but have not been successful. I'll document what I've done here. If you spot an error, please let me know. Start with fresh Armbian_5.20_Orangepione_Debian_jessie_3.4.112 image. Then apt-date update and apt-get upgrade. Attached nrf24l01 like this (pictures of header and radio are attached for verification); nrf24l01 color opo pin opo fn 1 GND blk 25 ground 2 VCC red 17 3v3 3 CE org 29 PA7 4 CSN ylw 24 CS0 (SPI-CE0) 5 SCK grn 23 SCLK 6 MOSI blu 19 MOSI 7 MISO mag 21 MISO 8 IRQ n/c git …

Hello, after some time i am trying to work again on my Orange Project. Now i want to connect an serial device on UART2 (PA0 / PA1). The devices /dev/ttyS0 - S3 are existant, but no data is coming in over RXD. I already read the thread here and tried to check the configuration. I upgraded my armbian and i am now working with ARMBIAN 5.60 stable Debian GNU/Linux 9 (stretch) 4.14.70-sunxi64 So i hopefully found the configuration in /boot/dtb-4.14.70-sunxi64/allwinner/sun50i-h5-orangepi-pc2.dtb After decompiling i found uart0@0 { pins = "PA…

Guide: Configuring Orange PI PC to receive IR/InfraRed and fix Lirc I also show how VNC can be used to do remote control on orangepipc+ on the example of kodi. Should be the same on orangepipc boards. If a USB IR receiver is used the problem ma not be present at all, but i use the on-board IR receiver. Is dirty work around, if someone knows how to fix it correctly please tell! (I installed the latest version of LIRC 0.9.4b from the source code and compiled it, but it din not fix the problem. So i stay with the version ARMBIAN 5.25 stable Ubuntu 16.04.1 LTS 3.4.113-sun8i comes with.) If the LIRC tool irw cant be started and …