Allwinner sunxi

I know I'm supposed to log with armbianmonitor -u, but I can't behind that ***** corporate proxy. So I made a strace. / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) |__ /___ _ __ ___ | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | | / // _ \ '__/ _ \ | |_| | | | (_| | | | | (_| | __/ | __/| | / /| __/ | | (_) | \___/|_| \__,_|_| |_|\__, |\___| |_| |_| /____\___|_| \___/ |___/ Welcome to ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi System load: 0.11 0.24 0.25 Up time: 6:55 hours Memory usage: 26 % of 493MB Swap usage: 9 % of 127Mb IP: 10.aa.bb.ccc 169.254.6.65 CPU temp: 45°C Usage …

I have problem with transmission-deamon on my CubieA20. It not starting listening on boot. Only after service restart. Met same problem on Raspberry-3 but it cured by enabling "boot to wait until a network connection is established" option. I checked the raspi-config and taken same measures on my A20 ("ExecStart=/sbin/dhcpcd -q -w" etc). Not succeeded! Anyone have alternate methods? There's some more applications that not starting on boot if connection not active, Blynk-client for ex. PS: I use legacy kernel on 5.25 Armbian. UPD: Problem resolved by editing /etc/network/interfaces.

Hi. I've always had problem with the composite output (cutted edges) so i gave a try to the latest release. Unfortunatly the video does not show up at all. Anyone still using the old Opi0?

comes to adding 131068 swap on /var/swap and further loading is not How to fix it? tried a USB flash drive to the new record, it is still the same, a reboot is not helping

Hi i am using Orangepiplus and armbian 5.20 debian jessise. but i have problem. somtime it's stopped Point is => started LSB: set CPUFreq kernel parameters or => starting LSB: set CPUFreq kernel parameters, so i adjust boot clock using /boot/script.fex => boot_clock : 1080 -> 1180 and => boot_clock : 1080 -> 980 but it's failed. help me please. (i try to reboot command, 100sec (repeat))

I'm going to use MIPI DSI LCD with OrangePi Win. In default configuration MIPI DSI is disabled. I activated Samsung DSI panel in kernel configurator. But it seems it always compiles default configuration. I don't see mipi dsi in dmesg. And image size is always exactly same, doesn't matter make I change in configurator or not. So my question how to compile whole image with MIPI DSI support? Thank in advance!

Hi, trying to install a char driver without any driver framework. The only thing I can not install is getting the Interrupt through to the interrupt servce routine err = request_irq(irq, handler, // IRQF_TRIGGER_RISING, IRQF_TRIGGER_HIGH, "can4linux", &can_minors[minor]); irq is the Interrupt number of the CAN controller, it is fixed in the A20 to 58. I do get no error messages, but the isr is not called. What I am missing? Greetings Heinz By the way, it worked an Bananian 3.x

Hello After spending hours of trying to create an older DEV kernel (5.1.21) here are the following steps in order that it will work. I will describle here about the 5.1.21 kernel but I think it can work for any kernel. 1. create lib.config file under build/userpatches with the following: KERNELBRANCH='branch:orange-pi-5.1' 2. And this is what create the magic: download the Armbian files that matches that distribution and replace all the files in the build directory: for example I have downloaded from here - This link is the build version from the branch of the 5.1.: https://github.com/FireflyTeam/armbian-build/tree/e…

Hello, does anybody found a working WiringPi version for the Orange PI Zero+ H5?

my code works just fine when executed during ssh session on NANOPI NEO CORE (booted from emmc) ! when trying to make this code run automatically on startup which is something that i have done before, unexpected delay happens after 5 seconds of continuous taking data from mic to be sent on serial port ! could not figure out what is really going on ! does it differ in terms of configuration of the nanopi when logged in through ssh !? or is there some configurations that must be handle on startup scripting !?

1.Only OpenGL ES2.1 and 1.x work: chenyifei@orangepi3:~$ glxinfo|grep OpenGL OpenGL vendor string: Panfrost OpenGL renderer string: Mali T720 (Panfrost) OpenGL version string: 2.1 Mesa 20.2.0-devel OpenGL shading language version string: 1.20 OpenGL extensions: OpenGL ES profile version string: OpenGL ES 2.0 Mesa 20.2.0-devel OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.0.16 2.glx did't work with panfrost dri: chenyifei@orangepi3:~$ cat /var/log/Xorg.0.log|grep GL [ 10447.384] (II) Initializing extension GLX [ 10447.384] (EE) AIGLX error: sun4i-drm does not export required DRI extension [ 10447.395] (II) IGLX: Load…

Orange Pi PC+ installed Armbian Bionic mainline kernel 4.19.y, Armbian Stretch mainline kernel 4.19.y not working sound via HDMI, on an older version Armbian Xenial desktop legacy kernel 3.4.y sound via HDMI works. What to do to make the sound work in the new version

Hi first of all sorry for my bad English .I have an OPI PC + ,I install Ubuntu on my sd card and after boot i used nand-sata-install command to use may nand but when i tryied to use my sd card (after format sd card) it did't work and after reboot i receive "panic= boot argument" how can i use my sd card and mount it when my dist installed on nand? even i checked this link for Cubietruck but it wasn't useful for OPI , and then i checked this and it was really hopeful but I don't now how can i exactly implement this .Actually I need to auto mount my sd card as a result when I reboot my OPI PC + I need my OPI boot from emmc instead of sd card. thank you for you…

Hello everyone. I would like to create an update system, which via a link on a web page, will check on an ftp server and if a version is newer, download the img file and install it. it is the installation part that poses me big problems. to write an img on the sd we must use the command dd if = ..... of = ...... But since the sd is used it does not work. I had thought of going through berryboot but a priori it is not functional on the m2. If someone has an idea thank you

I had to resolder the pins of the debug port on my NanoPi NEO Air and must have damaged the RX connection as I am unable to send commands but can receive read the debug output fine. Is it possible to change the debug port to UART1 or create another root terminal at another serial port?

Hút bể phốt số 1 hn – địa chỉ nào tốt nhất Tại Hà Nội hiện nay, tình trạng tắc nghẽn, đầy bể phốt thường xuyên diễn ra gây ảnh hưởng nghiêm trọng đến cuộc sống sinh hoạt của người dân. Một trong những giải pháp tốt nhất trong những trường hợp này đó chính là sử dụng dịch vụ hút bể phốt của đơn vị hút bể phốt số 1 hn - Công ty hút bể phốt Avico với chất lượng dịch vụ hoàn hảo nhất. >>> Mời các bạn xem thêm về Dịch vụ hút bể phốt tại quận Hoàn Kiếm Avico : https://hutbephottaihanoi.vn/hut-be-phot-tai-hoan-kiem/ Những lý do khẳng định Avico là đơn vị hút bể phốt số 1 hn Trên thị trường hiện nay có vô vàn đơn vị cung cấp đến với người dùng trên thị trư…

Hello, I have a Orange Pi One Plus. It has an onboard mic. No matter what i do i cannot record sound from it. Please help, how can i record sound from onboard microphone? marko@orangepioneplus:~$ cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepioneplus BOARD_NAME="Orange Pi One+" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=d485420c00 VERSION=22.08.1 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable marko@orangepioneplus:~$ uname -a Linux orangepioneplus 5.15.63-sunxi64 #22.08.1 SMP Tue Aug 30 07:11:56 UTC 2022 aarch64 …

I'd love to backup my X2 before I start to mess it up just to have a restore point somewhere at the start. Is it possible with a live linux and dd if / of?

Hi, I am trying to write a program which will detect the presence of SD Card in Nano Pi M1 plus device. There are many ways to do this either by doing fdisk -l or looking into /dev/mmcblk* . But I want to keep running it in a loop and doing fdisk -l and grep doesn't seems an appropriate way. Can the insertion or removal of SD cards be checked via Hardware Interrupts? Plz. help me I am a newbie.

I have a cubietruck at my cabled network (RJ45). Using Ip Scanner tools, I only find it by MAC address. The manufacturer name have nothing, how can I put a manufacturer name to help me find it? Other computers show their manufacturer names.

until I've installed the 24.05 image the cubieboard2 came up with an HDMI output on video, I have an DVI to VGA Adapter connected and could use an USB Keyboard+Mouse and the VGA Monitor. Since I've installed the Armbian_community_24.5.0-trunk.667_Cubieboard2_jammy_current_6.6.31_xfce_desktop.img.xz on the SD card, the system comes up with an ASCII Console on the VGA Monitor, later the screen gets cleared with only an cursor in the left top and then gets switched off. I've managed before to switch the output of the X-Server from None-1 to HDMI-1-1 using xrandr, but this is only possible with an proper and authenticated Display and I have to use an autolog…

Hello, I am really struggling trying to find up to date images (debian jessy) for my Cubieboard4 A80. I'm thinking of selling the hardware now as i'm stuck on the old images which are not being patched: http://dl.cubieboard.org/model/cc-a80/Image/debian-server/ Can you suggest how i should proceed? Any help would be greatly appreciated Thanks, phrag

I just want to post a thank you to the developers and contributors who have built one NICE distribution. Over a year ago I bought a few OPi PC as a possible replacement for Raspberry Pi based HAM radio projects I support. To say I was disappointed in the distribution from the manufacturer is a understatement. Without Loboris stepping up and getting something usable I would have tossed them in the trash and moved on. Last night I downloaded and installed Jessie server from Armbian. What a pleasure. Small, clean and a giant plus for me, HEADERS!!!!. I am so tired of having to build the headers for a kernel so I can compile the out of tree modules I need. I just ordered a f…

Good afternoon, please help configure the rotation of the logs. I am completely new to this system, unfortunately, I can not find a normal instruction on how to configure rotatilog. My problem is that the logs are full, and my necessary scripts stop working. If I constantly clear the logs manually, then the scripts work fine. I tried to configure the rotation in accordance with the instructions, it only works before the reboot, after the reboot, everything I fixed with the rotation changes the paths to /var/log.hdd/. Please help me make sure that all logs do not exceed 1m. and constantly spinning. I apologize in advance if not fully expressed his thought.

Try to use a DTS file to add bluetooth reset gpio control to rfkill, but `rfkill list` doesn't show "sunxi-bt". /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { bt_pwr_pin: bt_pwr_pin@0 { pins = "PG13"; function = "gpio_out"; }; }; }; fragment@1 { target-path = "/"; __overlay__ { rfkill_bt { compatible = "rfkill-gpio"; pinctrl-names = "default"; pinctrl-0 = <&bt_pwr_pin>; reset-gpios = <&pio 6 13 1&g…

Hi Thank you in advance for the help and the magnificent work ??Has "(BananaPi M1)" KVM kernel supports in Ubuntu Mate 16. I would like to virtualize Windows XP or Windows 7 in "(BananaPi M1)" a social project for non-profit. I'm about to go crazy is this compatible with this board (BananaPi M1) Thank you

Network block device support is not included in the 3.4 kernel on opi PC CONFIG_BLK_DEV_NBD Could this be enabled by default in a future update?

Hi All, Can you please help me how can I set up OV5647 camera with Orange Pi One? Where can I find driver for it? Camera link: https://www.aliexpress.com/item/Orange-Pi-fish-eye-Camera-Night-Vision-for-Orange-Pi-PC-Zero-One-PC-Plus-Plus2/32864676943.html?spm=2114.search0604.3.26.74868de282hQoP&ws_ab_test=searchweb0_0,searchweb201602_5_10065_10068_5015215_10059_10696_100031_10084_5015115_10083_10103_451_10618_452_5015815_10304_10307_10820_10821_5015915_10302,searchweb201603_16,ppcSwitch_5&algo_expid=44e91c9c-67e1-49b9-83f3-2c2890deab01-3&algo_pvid=44e91c9c-67e1-49b9-83f3-2c2890deab01&priceBeautifyAB=0 Thanks!

Hi, I'm using several Orange Pi Zero boards. At any given time, when I run "reboot now", I can no longer access the OPI via ssh. I tested the following distributions: Armbian_5.25_Orangepizero_Ubuntu_xenial_default_3.4.113 Armbian_5.59_Orangepizero_Ubuntu_xenial_default_3.4.113 All the programs I installed, which start from boot normally work, but I can not access via SSH. Is there any corruption of ssh files? Thank you for your help

installed wireguard on orange pi, configured the config, it works. It was necessary to restart orange, and after restarting it don t connecting to the LAN cable, even the orange light bulb is not lit. I start without sd, everything is fine. Reinstalled, installed wg again and the same thing again. What is the problem? OS:Debian11 (https://redirect.armbian.com/region/EU/orangepi3-lts/Bullseye_current)

Hi, This will be my first time using Armbian and OrangePi, sorry if theres stupid questions. I want to write a C++ application that uses LVGL to display information on a USB screen and have a few questions. 1) Will I be able to this screen in this setup. It uses the frame buffer (/dev/fb0). There are instructions for RaspberryPi, where its just plugged in and the frame buffer is available to use. 2) If I just use the latest Armbian Ubuntu version for this board what is the newest version of C++ I can use? (C++11/14/17 etc) 3) Is there a tool chain available to be able to cross compile my application (specifically from…

Hello! Brand new user here to the NanoPi Neo and even the forum. I'm planning to use a NanoPi Neo as hardware "interactor", the main idea is to connect a NanoPi Neo to a smartphone (Android or iOS), power the board from the USB cable and work in Host Mode to interact with de smartphone with libimobiledevice or adb. OTG does not support charging + data at the same time without a "special" OTG adapter. What I want to do is power the NanoPi by using the smartphone and even interact with it in host mode, like a regular computer will do, in simple terms, using a single cable, but getting power from it. Is this possible using NanoPi microUSB+OT…

Hello, On Orangepilite2, USB3 is recognised as USB2. I have connected multiple usb3 devices and results are same. I tried armbian, orangepi Debian, orangepi Ubuntu! results are same same too. For some reason all OS have same issue. In picture mass storage is USB3 device.

Hi, First time user here. I'm using the legacy Jessie build with kernel 3.4.109 Kernel. OTG is enabled and generally working. However, with some USB devices we are getting the following message with dmesg: WRN:L2705(drivers/usb/sunxi_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_schedule, best_end [ 663.633167] WRN:L2951(drivers/usb/sunxi_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_schedule failed [ 663.641968] cannot submit datapipe for urb 0, error -28: not enough bandwidth This only happens with some USB devices. My USB headphones work fine but a USB DAC for music does not. I remember reading somewhere the OTG on the BananaPi seemed limited in terms of actual conne…

Hello, I am facing an issue regarding audio playback using the vanilla kernel( v4.5.2 ) for Banana Pi. There is no sound via the analog audio jack. aplay -l does show my playback device though. Here are some screenshots of my current config: speaker-test is throwing error: Should I need to configure anything else?

I have move system to emmc, and want to use sdcard to storage videos from camera. So I want to sdcard can automount/umount after hotplug. I have try to use udev to fulfill it. But it seems not work. I add a rules for udev at /etc/udev/rules.d: ACTION=="add",KERNEL=="mmcblk2p1",RUN+="/etc/udev/sdcard_hotplug.sh add /home/opi/Videos/sdcard %k" ACTION=="remove",KERNEL=="mmcblk2p1",RUN+="/etc/udev/sdcard_hotplug.sh remove /home/opi/Videos/sdcard %k" And add a shell file at /etc/udev/sdcard_hotplug.sh #!/bin/bash case $1 in add) mkdir -p $2 mount -t exfat -o iocharset=utf8,rw,sync,umask=0000,dmask=0000,fmask=0000 /dev/$3 $2 ;; remove) umount $2 …

Hello Team, We are using H618 Allwinner SoC in which we have requirement to enable secure boot as per requirement. We have already checked couple of documents regarding secure boot enable but tools and scripts are not available to create Keys and other process using which secure boot can be enabled This project is based on the armbian image building system and is suitable for the Debian and Ubuntu image building projects of the Wildfire LubanCat (Luban Cat) Allwinner series boards. We are using allwinner-h618-gentoolinux build for build and development perspective. Let me know if need anything else from my end. …

I have Armbian running on Banana Pi R1 without networking access. Is this board suppported at all or it is just a waste of time?

Hi everyone, i want to wake up orange pi on any gpio pin. Current i only can wake up from button on orange pi. There is a section of wakeup_src_para in fex configuration file, but when i append a wakeup_src with any gpio port, does not effect anything to wake up. how can i do?

Hi, I'm trying to put my OPI zero in mono instead of stereo by default. On ARMbian my alsa config file (/etc/asound.conf) looks like this : pcm.!default { type plug slave.pcm "dmixer" } pcm.!dmixer { type dmix ipc_key 1024 ipc_perm 0666 slave { pcm "hw:0,0" period_time 0 period_size 1024 buffer_size 4096 rate 44100 format S32_LE channels 2 } bindings { 0 0 1 1 } } ctl.!dmixer { type hw card 0 } I tried to add something like this but without success : pcm.makemono { type route slave.pcm dmixer …

hey guys, Using legacy kernel I have trouble having dual output on LCD and HDMI. I tried to have a cloned dual output (same framebuffer for both) : [disp_init] disp_init_enable = 1 disp_mode = 4 screen0_output_type = 1 screen0_output_mode = 6 screen1_output_type = 3 screen1_output_mode = 4 fb0_width = 0 fb0_height = 0 fb0_framebuffer_num = 2 fb0_format = 10 fb0_pixel_sequence = 0 fb0_scaler_mode_enable = 0 fb1_width = 1024 fb1_height = 600 fb1_framebuffer_num = 2 fb1_format = 10 fb1_pixel_sequence = 0 fb1_scaler_mode_enable = 0 ... Also tried with 2 framebuffers : [disp_init] disp_init_enable = 1 disp_mode = 2 screen0_output_type = 1 s…

Allwinner_H3_Datasheet_V1.2.pdf up to five UART controllers In sun8i-h3-orangepi-pc.dts only 4 How do I use all five? serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = < 0x1c28000 0x400 >; interrupts = < 0x00 0x00 0x04 >; reg-shift = < 0x02 >; reg-io-width = < 0x04 >; clocks = < 0x03 0x3e >; resets = < 0x03 0x31 >; dmas = < 0x15 0x06 0x15 0x06 >; dma-names = "rx\0t…

I found a problem about ethernet port leds in mainline kernel, legacy kernel is fine. the ethernet port has two leds, one is link-up (green), the another one is act (orange). In Normally, the green led keep light on when cable plugged in. And the orange led keep blinking when data coming or outgoing. but in mainline kernel (4.13.16-sunxi / linux-image-next-sunxi 5.35) ethernet port leds REVERSED. the green led keep light off when cable plugged in but light on when cable plugged out. I found that problem both in a new bought opizero and an old opizero. here is a short video record

Hello, I use the BananaPi M1 as network bridge with tranparent http proxy and filter with 2nd ethernet (USB adapter with AX88179 Gigabit Ethernet). But since latest update with kernel update, the network seemce to be go down often or the sytem is going bad. I can't find any solution and need some help. If you need some more information, please tell me what I should send. Thank you! Edit: The system is stuck on reboot... have to put of the power.

I was able to upgrade Armbian to 18.04 bionic beaver on my Banana Pi M1, and it's working (almost) fine! I used the command to update the sources.list to bionic: apt update && apt dist-upgrade -y && apt autoremove -y && apt autoclean apt install update-manager-core do-release-upgrade -d Fetched 403 MB in 8min 43s (769 kB/s) I gave "yes to all" to almost everything, except on replacing config files like KEYMAP, sshd and bind All these services I use are working correctly: network, SSH, bind, mail, cups, minidlna, SATA, USB printer, Samba This is not working: qbittorrent-nox 4.0.4 (misses libboost-s…

Hello, I'm looking for an efficient way to update the eMMC-memory of multiple NanoPi NEO Air's (roll out a production image). I was thinking about integrating my own image in to the eflasher from FriendlyElec but then found this possibility to access the integrated memory via USB-OTG and FEL. https://forum.armbian.com/topic/1580-nanopi-neo-air/?page=9 Wherefore basically two repos are used: sunxi-tools fel-mass-storage I tried following the instructions, build and installed the sunxi-tools (sunxi-fel) and used "dd" to copy "fel-sdboot.img" to an empty SD card. For testing I took a brand new NanoPi NEO Air, connected UART0 with my P…

Hi, I am totally new to Linux, but already managed to run OMV on my Banana Pi M1+ with Plex and other services I wanted on Armbian. Now I tried to run Kodi, so it could serve me both as NAS and HTPC. Firstly, I have installed xorg, then lightdm and set it up for autologin, which is working correctly. Then, I have installed Kodi 16 from git, but only gray box appears and then vanishes and screen stays black. My first impression was it is lacking GL drivers, so I have followed this tutorial: https://forum.armbian.com/index. ... pi-orangepi-pc-etc/, tested and everything seemed to be ok. I installed Emilia Pinball to check additionally - it renders correctly. Still, when …

Hi, I'm running Armbian 5.38 with kernel 3.4.113-sun8i on an Orange Pi Zero. I'm writing an audio streaming application using the portaudio library for accessing the soundcard. It seems that the OPI Zero samplerate for the built-in microphone is configured at 24kHz instead of 48kHz. $ cat /proc/asound/card0/pcm0c/sub0/hw_params access: MMAP_INTERLEAVED format: S16_LE subformat: STD channels: 1 rate: 24000 (24000/1) period_size: 960 buffer_size: 1920 If I connect an external USB soundcard, I get the expected values: $ cat /proc/asound/card2/pcm0c/sub0/hw_params access: RW_INTERLEAVED format: S16_LE subformat: STD chan…

Hello, Im using a Orange Pi Zero, running nginx with Nextcloud. Im noticing 99.99% usage on the IO reported by iotop, but disk read and disk write show 0%. Even a refresh on the homepage bumps it up to the top of the IO list. As far as I am informed... isn't kswapd0 supposed to deal with swap memory and go wild when I am about to run out of RAM? I have disabled (hopefully), my swap partition, but I am still getting this. I have commented out the swap line in fstab... htop reports 0KB SWAP. It doesn't seem that I am running out of memory. About 50% of it appears to be free all the time. I am really new to dev boards and such, but this didn't appea…

Help I'm trying to get my t230 dvb stick to work with my orange pi pc2 I copied the .fw files across and reboot but it will not load the firmware can anyone help please

Hi guys! I have a 2Mp webcam connected to OPi zero H3. It nicely works with mjpg-streamer and web-server, but stream is only about 10-12 FPS with 1280*720 resolution. After running "armbianmonitor -m" cpu load is only 26-27% Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 19:32:15: 1104MHz 0.05 13% 0% 11% 0% 0% 1% 27.7°C 0/7 19:32:20: 1104MHz 0.12 26% 0% 26% 0% 0% 0% 27.6°C 0/7 19:32:25: 1104MHz 0.19 26% 0% 26% 0% 0% 0% 26.7°C 0/7 19:32:30: 1104MHz 0.26 28% 0% 26% 0% 0% 1% 28.3°C 0/7 19:32:36: 1104MHz 0.32 27% 0% 26% 0% 0% 1% 28.1°C 0/7 as i can understand, board now runn…

Hello. How I can to set the 480x800 resolution? I have LCD display with portrait orientation and no one display mode from h3disp does not fit. On boot display is working fine, but after booting everything is bad. Booting video: After booting:

Hello everyone, As I was looking for to see the cause of not having any free memory left on this BananaPi, I found out that Clamav daemon is using all the free memory (44%), after stopping the service I could again see more free memory. The clamAV was installed I think when I installed apache, mysql using the provided scripts (softy). Is this a normal RAM usage for ClamAV ? Also please can you tell me what I could do to optimize mysql for a low resource server as this, I can see alot of mysql proccesses runing Than k you.

Hi there, with Armbian Buster "OOB" (+update) I have following problem on Orange Pi 3: - Firefox (with language Polish) does not play network radio: https://www.rmfon.pl/play,25#p , - at the same time: - there are /dev/snd/ files, only for HDMI, but I have read that currently there is no driver for H6 audio, so I may expect at least ALSA is working, - VLC plays MP3 files correctly, (but it can play with pulse and ALSA), - pulseaudio is not started / configured / present. What should I do?

Hello, I attached Micron M500 SSD with gpt table, also Seagate 3GB hard disk with gpt to sata data connection and powered disks with external power adapter(it supplies 5V and 12V and comes with usb-sata adapter). U-Boot shows message: SCSI: AHCI PHY power up failed. dmesg: SATA AHCI Phy Power Failed! SATA AHCI Phy Calibration Failed! sw_ahci sw_ahci.0: controller can't to PMP, turning off CAP_PMP sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1 sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc scsi0 : sw_ahci_platform ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0…

Hi, I use BananaPro on Armbian Strech or Bionic, I try to use the GPIO python library (for bananapro from LeMaker github) gpio.add_event_detect() or GPIO.wait_for_edge(channel, GPIO.RISING) This usually disconnect my network and the event is never detected. I have to reboot the PI to restore the state. Also, a normal read/write state GPIO.input(PIN_NUM) works perfectly... I try this : https://forum.armbian.com/topic/3249-bananapi-m1-gpioadd_event_detect-not-working-after-switch-to-vanilla-kernel/ but not work. My python script work fine on Bananian on the same bananaPro. thank for your help.

Guys please help me. My orange pi one with Armbian installed and running Pi Hole. The HDMI Output is not working, And when I try to enter this command h3disp [-h/-H] -m [video mode] [-d] [-c [0-2] it say access denied. My point is there's no output this play on my device. I hope someone understand me and help me thank you.

Hi, I have a orange pi one which I use as a test web server and everything was good so far, the first problem I came a cross that the couchbase server on debian package did'nt support arm, so I skipped that and used another computer as couchbase server, But the problem now is that I can't install the couchbase php client on the orange pi, then I tried the build the libcouchbase my self. I actually did build it (I have no previous experince with build) After I built it I don't know what to do, now I have libcouchbase.so file and other files but I can't still use couchbase php commands. Any help is appriciated. Thanks.

I need help i won´t only make an update on cubietruck and bpi-r1 to the last version 5.25 or 5.27 not more. I make apt-get update and apt-get upgrade then i have 5.31 i won´t only 5.2x. Gives an way for an update to 5.2x sorry for my poor english

Hello everyone, I am encountering problem with pulseaudio on Bananapi M1. I don't want the board to suspend speakers on idle. As Pulseaudio is used I simply commented this line: ``` ### Automatically suspend sinks/sources that become idle for too long #load-module module-suspend-on-idle `` in `/etc/pulse/default.pa`. The problem is that if I play something e.g. raspotify I dont hear the sound anymore. As soon I keep raspotify playing and restart Pulseaudio (killall pulseaudio) the sound is back again. If I pause music I lose sound again and need to kill pulseaudio. Does anybody encounter same thing?

Hello, I'm a new Armbian user of my first OrangePI One H3 board after much time spent on rpi boards. I was curious to see how these boards run and I bought one. I'm using a fast 32GB A2 microsd, an external 4 USB externally powered hub, an HDMI to VGA converter with audio out. I was deciding at first which o.s. to use cause I've seen there're also Ubuntu and Debian official 5.x kernel based images on their page but I tried this at first. I've installed usual applications browsers office apps mail etc, and now I'd like to make some questions to better understand some things: 1) I know being on the armbian forum I'd expect everyone to prefer thi…

hi i have installed armbain on microsd card on banana pi m2+. Pulseaudio via pavucontrol recognized the sound card. Every seems to be ok. But when i tried play radio via rythmbox or play you tube audio voice is very interruped. it does not work in fact, because interruption are very often..... the same problem is with images provident by banana pi team. Only Raspbian MATE images works out of box.

Hi, I have Orange Pi Zero, that don't have jack 3.5, I welded one jack 3.5 female in the correct pin and the music sounds good, but the voices sounds bad, what's wrong? Melody good, voice bad system: Armbian_5.25_Orangepizero_Debian_jessie_default_3.4.113 Sorry for my bad English

Hello, I'm buliding a music player for my old car using Orange Pi PC Plus. I would like to use external incoming logic levels (3.3V / 0V) to wake up the OPi from suspend state. Could you help me how to do that? Waking up using the HW button SW4 is working perfectly. I need to do this using external logic signal connected to PA11 / GPIO pin #5. I tried the following setting in fex editor: [gpio_power_key] key_used = 1 key_io = port:PA11<6><default><default><0> It doesn't work. I keep the pin on HIGH (3.3V) normally, and when I bring it to LOW state, OPi won't wake up. I tried also ch…

Hi Everyone I have a small problem, I recently purchased a OrangePi Zero and wanted to run Armbian on it, I downloaded the last stable release 3.4 (Debian Jesse) and prepped my Adata 32gb with Etcher same way I did my Opi Lite, and placed it in the Opi, and nothing happened , it doesnt boot up at all if I apply power (I can see both ethernet leds but not the power LED) I disconnected it and connect my Uart cable to the Zero and confirmed there is no output when you power it on, I then tried the Xenial build and still nothing, I downloaded the latest nightly 4.9 and Boom ,works like a dream I get output via Uart and can use the terminal to configure it. My Problem …

anyone know if the onboard mic works in armbian? ive tried using arecord on the default audio device but no output.

SBC is banana pi M1 I tried the banana pi at church today, things went great as for the Libreoffice impress presentations but it was hard to navigate to menus because the banana's resolution was set to 1920X1080p. Everything was too small in the projector, we need something like 1280X1024 or 800X600. I tried `a10disp changehdmimodeforce 4` to change it to 720P, on the projector but display became unstable and I had to reboot to get it back. We have two modes for projector, VGA (HDMI->VGA converter cable) or plain HDMI. Today I tried the VGA but we can also do HDMI. Please help. Thanks.

Orange Pi Zero Plus | 5.83 | arm64 | aarch64 | 4.19.38-sunxi64 Hello Armbian community, I set up the wifi with armbian-config, but Wifi connection get lost or after reboot it does not connect again. Is there something I could to. would it help to turn off power management ? how too? looks like i am not the first with this problem: 9213-orange-pi-zero-plus-wifi-looses-connection-tip But if its possible I do not want to turn off the network manager ____________________________________________________________________________________________ …

Booting my A20-OLinuXino-MICRO with the Armbian_5.20_Micro_Debian_jessie_4.7.3.7z (freshly downloaded) image from SD card hangs with these last log lines: [ 17.564273] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 384000 KHz [ 17.599267] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 528000 KHz At the start of the boot, there are also some bad looking error messages from U-Boot: Failed to set core voltage! Can't set CPU frequency Trying to boot from MMC1 U-Boot 2016.09-armbian (Sep 15 2016 - 05:13:34 +0200) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Olimex A20-Olinuxino Micro I2C: ready DRAM: 1 GiB M…

First up, I did have a good dig around but couldn't find anything discussing my problem but if there is a thread already existing please just link to it, no need to get huffy. I have a problem with armbian on NanoPi NEO where USB devices are not properly detected at start up (warm or cold start). Armbian version details: BOARD=nanopineo BOARD_NAME="NanoPi Neo" BOARDFAMILY=sun8i VERSION=5.67.181115 LINUXFAMILY=sunxi BRANCH=next ARCH=arm IMAGE_TYPE=nightly BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage I have also tried nightly build Armbian_5.65_Nanopineo_Debian_stretch_next_4.14.78.img. The…

On Nanopi Neo Core 2 LTS (Allwiner H5) : - Armbian Stretch stock : speedtest Down:90Mb/s Up:80Mb/s - Armbian Buster stock : speedtest Down:90Mb/s Up:4Mb/s Maybe regression in network drive ? I was not able to find any information on this issue ... Could you help me please ?

Dear maintainers, I have my sensors configured to reboot every night via a user cronjob (0 0 * * * /sbin/reboot), 14 sensors do this without a problem. I've fixed the nanopi neo+2 reboot from NAND some months ago (by re-using friendlyarm first stage u-boot). I just stumbled upon a failed reboot with one of my nanopi neo+2 nodes, after two successful reboots. Looking at the /var/log.hdd/syslog, it got stuck in the shutdown procedure when the watchdog reported a failure. The /var/log.hdd/syslog.1 extracts below show the start of the watchdog, and the stop of the watchdog and its failure. After the failure the system doesn't come up anymore, it needed a pow…

Hi all, yeterday i connected a lipo battery to my cb2, made some stuff and then shut down. Today i've found my battery totally discharged so I started investigating. I've found that even if the system is shutdown i can measure about 4.5V on ipsout. I verified also the same situation on my second cb2. Searching on the web i've found this post. Any of you could confirm, please?

hi Both the last img based on ubuntu for orangepi 2 and orange pi plus E doesnot run. LED doesnot light. Normaly i used old armbian img based on jessie 5.25 ( plus E ) nad 5.05 ( orangepi 2 ). It works. I download the new ones but nothing happend - black screen only...

Hello. I reactivated my old BananaPi M1 to measure some Temperatures by Dalla1820-Sensors. This is working like a charm and I could resolve all the Problems I had. But now I want to use also one GPIO-Pin as an digital Input (via bash) But all manuals I found in the Internet didn't work. Every Time i try to setup a Pin by sudo echo (Pin-number) > /sys/class/gpio/export I get the message, that I don't have the rights to do this. Could it be, that the GPIO are not usable, when I activated 1wire ? (of course I used a different Pin as I use for 1wire) Or must I activate some more options as only "w1-gpio" in the armbian…

I've followed the instructions below and cannot get past the "couldn't find avaliable UDC" error. help? https://vjordan.info/log/fpga/nanopi-neo-usb-otg-with-armbian-mainline-4x-kernel.html

I soldered the two wires to my OPi Lite, running Armbian 5.75 stable. I was only able to listen noise. Already tested to configurate /etc/asound.conf and alsa volume. Can you help me? Thanks.

I run a cubietruck with armbian jessie/legacy-kernel. I used it as a owncloud- and tvheadend-server. For the tvheadend-server i use 2 DVB-S2-USB-devices (TeVii S660 USB). I had problems woith one of them and want to replace one of them with a Technotrend TT-connect S2-4600. I could not compile the needed driver, so I tried to use the vanilla-kernel, because the newer kernel has support for this DVB-card. I could use the Technotrend-device with vanilla. But both devices stutters when displaying or recording a stream. Is this a known problem? When switching back to legacy, the old Tevii-device runs smooth again, but there is no support for Technotrend. What can I d…

[ 10.900422] libphy: 1c30000.ethernet: probed [ 10.921452] Generic PHY 1c30000.ethernet-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=1c30000.ethernet-0:01, irq=-1) [ 10.921469] sun8i-emac 1c30000.ethernet: device MAC address slot 0 a2:3f:fc:36:c5:70 [ 10.923862] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01 [ 10.923953] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01 [ 10.923958] sun8i-emac 1c30000.ethernet: device MAC address slot 2 01:00:5e:00:00:01 [ 10.923972] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.216443] random: crng init done [ 13.040824] sun8i-emac 1c30000.ethernet …

Hi all, i have orangepione uname -a Linux orangepione 4.19.20-sunxi #5.75 SMP Sat Feb 9 19:02:47 CET 2019 armv7l GNU/Linux And i try create hid gadget keyboard. I find topics about raspi zero, orange pi zero, and i use config from where. So i can create keyboard, and when i connect it to linux or windows machine i can see symbols, but when i try send key to macbook bios i have no luck. Did anybody know how to get work with macbook? /etc/modules dwc2 libcomposite /etc/rc.local /usr/bin/isticktoit_usb exit 0 alex@orangepione:~$ cat /usr/bin/isticktoit_usb #!/bin/bash sleep 10 # Create gadget mkdir /sys/kernel/config/usb_gadget…

Hello guys, there is a question, is there an EDK2(tianocore) for orange pi 3 lts? If yes, how can it be compiled? Maybe there are projects to run uefi operating systems for arm on orange pi.

Hi. After 2 years uptime it disconnected from wifi and was unable to reconnect even after reboot. I suspect my AC adapter has degraded. Can this SBC measure the voltage? Upd: saw this post: https://raspberrypi.stackexchange.com/questions/112122/wifi-not-connecting-depending-on-power-supply I use NetworkManager and when it starts it usually cannot connect to wifi saying that the pre-shared key is wrong, marking the connection as failed and not re-trying. In particular, the log contained a failed "asking for new key" message. Re-starting the service or manually activating the connection worked. As a workaround I created a *.conf file in …

Hi all, i'm trying compile 3.4.*, i used normal way - i downloaded scripts to manage it, i'm successful with compilation but my issue is that i want to connect relay to banana pi J12 (DIP8) pin 5 which should be PH3 on A20 and that relay should be connected in parallel to switch button on PC ... so it means each switch (even fast) of the level can start turn off pc :-( so my issue is that uboot default configs for banana pi is having irrelevant configuration of pins that are prepared on connectors to be used as GPIO ... for example PH3 and PH5 at banana pi's J12 are not related to VBUS of USB as it's written in configs and fex, please somebody could tak…

I was wondering if there is a significant performance difference with the lime2 when a heatsink is added? I plan on ordering a couple of heatsinks from ebay to try myself however I'm wondering if anyone from the community has any feedback. Thanks

I am running cubitruck wheezy 7.5 from 2014, Kernel 3.4.104 for over three years as homeserver with VGA display. How can I activate HDMI for a new display. (I cannot reinsall the whole system, growed up for all the years) I already changed the settings in fexfile: [disp_init] disp_init_enable = 1 disp_mode = 0 screen0_output_type = 3 screen0_output_mode = 6 screen1_output_type = 3 screen1_output_mode = 6 also changed fex to bin and reboot, but no HDMI-output Can anybode give me a hint?

Hi all, I'm interested in running canbus on Banana Pi (A20). I have problem with setup canbus. Some info about system: ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi in armbian-config -> System -> Hardware only "can" is enable and MCP2551 transreciver is connected to can rx/tx banana pinout. lsmod | grep can: root@bananapi:~# lsmod | grep can can_bcm 24576 0 can_raw 20480 1 can 20480 2 can_raw,can_bcm sun4i_can 16384 0 can_dev 20480 1 sun4i_can Next setup interface: ip link set can0 type can bitrate 125000 restart-ms 10…

Is there a way to run netflix yet? Does Chromium run well and able to run netflix? Appears this doesn't matter, because Chromium doesn't work with netflix anymore... Does anyone know if chromium OS works well with OPi PC otherwise? Basically I want it to work for netflix, I also want to connect it to a printer, and the ability to run NordVPN and a torrent client would be a bonus as well.

when i triaing change monitor in NANO PI M1 from HDMI to DVI ( H3disp 1080p ), then i cannot start system in a DVI monitor. After changed HDMI monitor is also blocked. Then you have to delete into another computer in sd card your scirpt bin file and rename script.bin.back to script.bin to return to HDMI monitor. DVI does not work at all . maybe it is producer error not software.

I'm sorry for the lame question, I just don't wanna regret anything before buying this fan, so I'm talking about this fan (3cm x 3cm) Spoiler I want to mount this fan right below the board by just screwing it in. Do the holes fit perfectly with the holes of the opiz board ? I've asked this before on facebook but someone suggested me to just glue the fan directly onto the board but I'm afraid it'll damage the board instead.

Hello guys, I trying to make my ili9431 to show early stage of boot console. Everything works great if I load from /etc/modprobe.d/fb_ili9341.conf but if I load from armbianEnv.txt nothings happen. I suspect that I am trying to load the device before the driver is loaded. I read about "platform file" here: https://github.com/notro/fbtft/wiki/Boot-console but I have difficulties modifying the files because the guide is for RPI. Can someone guide me or at least to know if I'm on the right track? Hardware details: Device: Orange PI Zero Plus2 Kernel: Linux orangepizeroplus2 4.14.83-sunxi …

I would like to set a GPIO to output-high during the boot. In this case, the GPIO is PG0 whose number is 192. The device tree overlay is /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-a64"; fragment@0 { target = <&pio>; __overlay__ { gpio_out_override_hog { gpio-hog; gpios = <192 0>; /* PG0 */ output-high; line-name = "PG0-gpio-hog"; }; }; }; }; However, after the application and reboot, I do not see any init information in "/sys/kernel/gpio" about GPIO 192. There is no "/sys/class/gpio/gpio192" folder existed after boot either. Is there anything wrong in the overlay file?

Hello, JiveLite would be nice for LMS-installation with Touchscreen/Display. http://forums.slimdevices.com/showthread.php?98156-Announce-JiveLite-cut-down-squeezebox-control-application Has anyone of you ever successfully compiled JiveLite? TIA Jochen P.s.: With a little help from google translator. Edit: Well, I did it!

I'm trying to figure out why Firefox-esr crashes form time to time on my Olinuxino-Lime A20. I also have a Banana PI (also A20) and on that board Firefox never crashes. On both boards I use the legacy kernel, and I use uBlock adblocker on both boards. The Olinuxino has 512 MB RAM and the Banana Pi 1 GB. Googling around I found out that crashreports could be viewed on "about:crashes" or on ~/.mozilla/firefox/crashes. However, there is no such file. Do youi have any suggestions on where to find crashreports? Thanks in advance and much appreciation for your continuous work on the Armbian distribution!

Hello! For the Cubieboard 2 on the SD card I use the image Armbian_5.25_Cubieboard2_Debian_jessie_default_3.4.113.img. It is only loaded with U-boot v2015.10.rar. But this U-boot v2015.10 480 MHz DRAM. At this frequency, my Cubieboard 2 freezes. Can anyone build U-boot v2015.10 to 432 MHz DRAM? I will be very grateful. I'm not very good at Linux. I apologize for the bad english.

Hi, Trying to setup audio mux on orange pi boards, for now trying to stick on orange pi ZERO & ONE ( both of them ). By mux, meaning will try to setup some peers which can play locally or stream sources they have. Let's say all peers have - x2 line in - x1 mic - x1 line out Want to dynamically connect any source to any output on any peer. For example after choosing, you can able to play line in of peer 1 on peer 1 output OR peer1 line in on peer 2 output And I think CD quality is more than enough. Trying to find any tools that will help to make this. Two solution points needed: - hardware: ?? as far as I can find, there is "line…

Hello all, just new to here, I bought an Orangepi PC board and grabbed lastest Armbian pre-built image with legacy kernel. I test my code that dynamically change the HDMI output resolution, by something like this: ioctl(disp, DISP_BLANK, true) ioctl(disp, DISP_DEVICE_SWITCH) ioctl(disp, DISP_BLANK, false) and then update fbvar by ioctl(fb0, FBIOPUT_VSCREENINFO) I can see output actually changed, everything goes well until I try to map framebuffer from /dev/fb0, it failed with errno EINVAL. After check drivers source code I think it's because the display driver, it forget to notify the system to update framebuffer parameter…

Hello i am working at project with olinuxino micro and USB 3G modem. From my experience i sometimes i need hard reset modem (turn off,turn on from USB connectro) i see that power is controlled by USB1-DRV (PH6) and USB2-DRV (PH3) I try to manually set this pins (PH6 and PH3) to LOW and after some time HIGH level to turn off and on power on USB connectors but this pins i see isn't configured as normal GPIO pins. so i have error in pyA20 - that this pins aren't GPIO. I ma a hardware guy so i have only a little experience in programming Can anybody help me with this ? Best Regards Robert // edit for others : i just find on cubieboard foru…

Hey folks, I'm hoping for some advice on achieving decent graphics for my application. I've got a prototype running with a custom board hosting the NanoPi Neo Air and a bunch of my own hardware. The biggest issue right now is getting reasonable graphics performance. The difference between mainline and legacy support has had me confused and switching back and forth trying to find a useful solution. Here's what I've learned so far: Mainline feels like the future, so that's my preference. My application uses fbtft over SPI for the graphics. I achieved 72MHz SPI on mainline which gives almost reasonable performance. On legacy the SPI driver seems buggy and …

Wanted to share my very positive experience upgrading to the latest kernel. Followed the procedure using armbian-config and it worked out of the box on my OrangePi PC2. Left the system overnight running my standard tests and no issues. Even the problematic rtl8192 has no issue. There used to be a slight judder on the HDMI attached monitor that is gone now, perhaps due to the new MALI450 gpu modules. ___ ____ _ ____ ____ ____ / _ \| _ \(_) | _ \ / ___|___ \ | | | | |_) | | | |_) | | __) | | |_| | __/| | | __/| |___ / __/ \___/|_| |_| |_| \____|_____| W…

Hi guys, does anyone know how to put a system indicator which is dock-able on the armbian panel similar to the photo below? I have tried installing "Indicator Multiload", "Multiload-ng" and "System Load Indicator" but did not have much success to make them work properly in the latest build of armbian. I am using Orange Pi PC+. Hope someone could help. Thank you very much in advance!