Tinkerboard

I'm trying to get the RPI 7in touchscreen working on armbian with my Tinker Board. Can anyone tell me how?

I played a bit with the SenseHAT from the RPi guys. Doesn't work fully but I get the first things working. What does run: Joystick 8x8 led matrix (partly, seems that there are some parts of the framebuffer not fully working) What doesn't run: all the sensors attached on the board What's missing: load it devicetree overlay (at the moment it's coded into the main dts) how-to what's needed to get it working on your tinker too I'll keep you updated.

Hi. I'm running Armbian 22.05.3 Focal with Linux 5.10.60-rockchip on an Asus Tinker board. Can someone tell me how to enable SPI? I've seen instructions that say you should be able to run armbian-config and go to System > Hardware > spi-spidev, however the Hardware menu does not exist for me.

Hi! I have installed Armbian buster 21.08.3 and can`t discover any externally connected i2c devices, such as rtc or ssd1306 Any ideas? i2cdetect -l i2c-2 i2c rk3x-i2c I2C adapter i2c-0 i2c rk3x-i2c I2C adapter i2c-5 i2c rk3x-i2c I2C adapter sudo i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- -- 20: -- -- -- -- -- -- -- -- …

Hi, has any of you some experience connecting a Hifiberry Amp+ to a Tinkerboard - on Hifiberry pages this is now a possible connecting but I miss a howto and would really appreciate a quick start on this. Have previously succeed with Raspberry 3 and IQaudio - but intend to take a step further and do a project being more than just an amplifier. After testing several OS I have to admit Armbian has become my favorite and it is within this OS I hope to achieve this.

Hallo! Habe Armbian 22.08.6 Jammy with Linux 5.15.74-rockchip mit Desktop auf "Asus Tinker Board Rev. 1.2" laufen, aber leider bekomme ich per HDMI keine stabile Verbindung. HDMI Kabel bereits getauscht (geht mit anderen Geräten einwandfrei) auch Montor getauscht (geht mit anderen Geräten auch einwandfrei). Auflösungen und Framerates habe ich durchprobiert - fehlerbild aber immer das gleiche; Bild bleibt bestenfalls ein paar sekunden ein, dann geht es wieder aus für ein paar Sekunden und das setzt sich fort. Hab ein bisschen hier im Forum recheriert und sehe das man ein "armbianmonitor -u" ausführen soll und im Forum posten: https://…

Hi, I am trying to make the RPI camera ( OV7750 ) to work with the TInkerboard in Armbian. But there is no module in /lib/modules for this camera. Is it already compiled in the kernel? Currently it doesn't work.

I got wierd screen blinking after update kernel from 5.8.18-rockchip to 5.9.14-rockchip. Here is blurry video with screen blinking. My screen resolution is 1600x900 and i'm using HDMI-to-VGA adapter. All was working fine with kernel 5.8.18-rockchip. I still can connect to sbc via ssh, so I checked kernel version, install old one and blinking gone: q@tinkerboard:/var/cache/apt/archives$ uname -a Linux tinkerboard 5.9.14-rockchip #20.11.3 SMP PREEMPT Fri Dec 11 22:00:29 CET 2020 armv7l armv7l armv7l GNU/Linux q@tinkerboard:/var/cache/apt/archives$ dpkg-deb -I linux-image-current-rockchip_20.11_armhf.deb new Debian package, version 2.0.…

Linux 4.4.163 has been released since the 10th of November, but the builds on the 13th and 15th are still only showing 4.4.162. I use your builds because they're awesome, they get me the latest patches. I hope 4.4.163 is included soon

Hello, I'm trying to show a startup logo a Tinker Board without success. I tried to add a parameter logo=/boot/boot.bmp to /boot/armbianEnv.txt but it doesn't work. Is the boot logo implemented on the Tinker Board? Does it require a patch? Thanks for your feedback.

I wanna use tinker board to work with logitech c930e camera. when i use cheese to open camera in tinker board. it's just show one black picture, and the camera light is on. before i had use the nanopi m4 to work with the logitech c930e. it's working good. and m4 create /dev/video0 , /dev/video1. but tinker board just create /dev/video0, so i think it maybe inside kernel have some option not open. but i don't know which need open. i'm not good at kernel. can give me some help? thanks a lot

Hello, I have Tinker Board. If I install Armbian I see screen only over HDMI. I would like to enable DSI touchscreen display. Is it possible? How make it? Thank you

I bought a Tinkerboard S and Tinker Aluminum case yesterday, but because of the case, it's Wifi function is almost non-exist, so I bought a TP-LINK TL-WN722N v2 two hours ago. I was hoping to get a V1, which has a lot of information on Wikidevi, and looks like it's going to work out-of-the-box, but I got a v2, and now I'm trying to get it to work. Wikidevi provided a link to driver repository, I downloaded main branch and type "make all" in terminal, it says /lib/modules/4.4.166-rockchip/build does not exist. I tried to search how to install kernel header and tried this command "sudo apt-get install linux-headers-$(uname -r)", it doesn't work/help. …

Is there an official way of installing libmali drivers on Armbian? I'm feeling a bit slow, since I can't really figure out how to install them. It seems like files from this github repo will overwrite other system files, so it's not a solution that would work in the long term.

I used sudo swapoff -a as suggested in this thread: but the setting isn't persisted, and upon reboot sudo swapon --summary shows a partition There's no "swap" text in my /etc/fstab I'm trying to install Kubernetes, so I need to disable swap.

Which Os does support hardware encode h264\h265 ? Or where i can read about status supporting hardware encoding for video (h264\265) and image (jpeg) ? chip: RK3288

Sir, I have Purchase the Tinker board before 20 days, I install the Armbian 5.35 version in the Board, All software are very Nicely Work , but could not connect audio , I am trying to the 10 more times reinstall the Armbian 5.35 version but could not connect the audio output in audio 3.5mm Jack , I will so tired please solve this Problem in my tinker Board …

i'm stuck with this since day 1 but now i upgraded to armbian (with kodi-gbm) i had this problem worse stress testing the board with stress -c 4 doesn't bring the board into shutdown, but logging in to kodi-gbm or using graphical interface? it brings instability all of a sudden. there's no inherent pattern from the shudowns except when i launch kodi or access some files (emby transcoding doesn't cause any instability). anything outside the text mode should cause it to shutdown. weirdly enough, when i removed the USB peripherals (2xUSB HDD, own power supply for both cases) the instability worsens and doesn't boot or sometimes reboot cycle after fsck.ext4 on sta…

Hi, since i have a Asus tinkerboard incoming i was wondering if anyone knows if the "generic" arm64 distro will work this board. Its based of the rockchip RK3288 SoC The support pages states that the board supports debian, but since i dont need a UI ect (im going to use it headless) i dont need the board to load a ui into memory and wanted to use a normal build instead of the TinkerOS Please note, my knowledge of the inner workings of *nix is quite limited, so if my question is to generic or imprecise i apologize.

There's a few problems with the UART driver on 5.0-rc2 kernels, since proper checks are not done correctly and lead to a Null Pointer dereference. Here's a patch to avoid this issue : From 7e43ae8446b420907f00b43308ad0b99b6fe4e51 Mon Sep 17 00:00:00 2001 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr> Date: Wed, 16 Jan 2019 23:58:52 +0100 Subject: [PATCH] drivers: tty: serial: Bail out if no UART is detected Before the 5.0, serial8250_register_8250_port consisted of one BIG if(uart && uart->port.type != PORT_8250_CIR) block, which prevented NULL dereference if uart, a pointer to an "uart_8250_port" detected through "serial8250_find_ma…

Hello people, I have an Asus Tinker Board S and decided to use the Mainline Armbian for this board, love the new panfrost driver but seems it is glitching all over the place, icons in the menu disappear and reappear when mouse hovers over them, tick boxes do not show if they are ticked and only flicker when mouse is over them and applications menu keep redrawing all over when trying to use among the most prominent problems. Other operating systems work well in this matter. Anyone else is having these problems with the mainline 5.4.28 kernel build?

I have a USB-C charger rated for 3A, USB-C Cable rated for 3A, and a USB-C to MicroUSB adapter rated for 2.4A. Should I even bother testing that?

Hello. In Armbian 5.34 (default, next and nightly (26/10/2017) no have permission for create, edit and delet conection on network manager. To be able to modify a connection it is necessary to open the network manager in root. It's really very exciting. Looking on the internet it turns out that it will be a problem of "policy". I had already reported this bug on the post "tinkerboard". He had been tuned to a nightly version but he came back. my account is in the group netdev and sudo like ask in the polkit Would it be possible to have a "next" version fix this bug or have the procedure to fix the error? thank

Hello, I have been experimenting with the bluetooth audio on my tinkerboard. The issue is both present on the last rockchip-next (4.1x I think) and the rockchip-current 5.8.18 kernel. I am using bluez and bluealsa. The problem is specific to the onboard bluetooth, using an external bluetooth dongle (a cheap and old CSR Bluetooth 3.0 dongle from China) works as expected, I can even send audio to multiple devices simultaneously (quality is very bad, but thats a bandwidth problem). As long as I just connect one bluetooth audio device everything is fine. I can have multiple paired, but disconnected, devices and as long as I connect and p…

hello i just installed Armbian_5.59_Tinkerboard_Ubuntu_bionic_next_4.14.67_desktop on a new tinkerboard s .. and ran myself into a corner immediately. i was trying to figure out how to get 4K 2160p resolution instead of HD 1080p. i changed the refresh rate from 60Hz to 30Hz and now can't get the display back. i tried reboot. and documentation at https://docs.armbian.com/User-Guide_Fine-Tuning/ said to modify /boot/boot.cmd and that file says "edit /boot/armbianEnv.txt to set supported parameters" .. . so i set disp.screen0_output_mode=1920x1080p60 in armbianEnv.txt no luck .. i seem to have gone headless earlier than planned .. advice pls? i w…

hi guys. I need to connect temperature sensor ds18b20 to thinker board on w1 (one wire) how is posible to put on ??

Hi all, looking for a bit of advise. I had an idea recently in that I have a problem of syncing a 20Tb USB 3.0 RAID0 drive with a 20Tb NAS. I have two fully duplicated RAID0 drives with no protection, so whenever I upgrade the capacity of a drive, I do a full sync. I do this maybe once a year. Whenever I have to do a full sync however it usually ties my MacBook up for a few weeks to transfer that much data over, so I had the idea recently of having a maker board do it since Linux/Armbian supports HFS+, I can just do an rsync between the two. I opted to purchase a Tinkerboard for the GigE Ethernet (I'll live with the USB 2.0), installed, up and running all…

Anyone having luck getting firefox quantum to run? I added the ppa and installed it but it crashes immediately.

Hi, i get a probleme with the actual uart acces config by default on Uart2 (pin 32, 33), because i need to use PWM pin (use to set motor speed with a L293D) and on the board only pin 32, 33 can be use with PWM. Now i am using 32 33 pin as PWM but if the cable on these pin is connected the board doesn't boot, maybe because the uarts of u-boot use these pin and the result of un connected cable to my setup = Critical fail. When i remove the cable on pin 32 the board boot. So i need to solve that because i don't want to disconnect this cable at each start and i want to use uarts with this setup. I need to change uart2 to uart1 or find a way to get PWM or a other pin option …

Hi, because I find in 4r dont see any topic to talk more about change ramdisk as increase or decrease, so I make this cmt, hope somebody help me know + How to resize for ramdisk, and how to using sd card as ramdisk and swap file, so emmc size will be have more space, because I want install kali into + If using bionic desktop, and only install kali tool for pentest, will bionic running ok ? or I must build and install kali as root ? Hope someone can help me know it. Thank you so much

Hi, I'll install OpenMediaVault and Nextcloud on a tinkerboard and I would like to know if there is any advantage on run system on SATA / USB in this case and if it is possible to do this on tinkerboard since it was not clear for me on the docs. Thank you

Anybody with a Tinker Board with a Gpu could run an inference for me? I need a benchmark for my thesis.

Hy again :p; I have customed my sd for my tinkerboard. i have done some settings like eth0 in static, partitions modified scripts and hostapd. When i put it in another Tinkerboard, everything works except wifi ap. I have searched why, and i have found that in my initial tinkerboard wifi is wlan0 and his settings is in /etc/network/interfaces.d/armbian.ap.nat When i put my SD in another tinkerboard, it is wlan1 which mounts and no wlan0. Wlan1 has no ip address. i don't see where is the problem? thanks by advance

Hi, i am new to single board computers and i tried almost every posible thing to make this work. DISPLAY=:0 xrandr --output HDMI-1 --brightness 0.5 and i also tried xbacklight, with no luck. Linux Debian 4.4.102-rockchip #3 SMP Fri Nov 24 19:01:14 CET 2017 armv7l GNU/Linux my xrandr output: kiosk@Debian:/sys/class$ DISPLAY=:0 xrandr Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 4096 x 4096 HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 640mm x 360mm 1920x1080 60.00*+ 50.00 59.94 25.00 24.00 23.98 1920x1080i 60.00 50.00 59.94 1280x1024 60.02 1280x…

Hi! I need to make sure that my GPIOs remember the last state when my Tinkerboard reboots. Is it possible to modify the bootloader and avoid GPIO.cleanup? If yes, then how? Thanks!

Hi folks... Looking at RK3288 on Armbian and the power/thermals - which are considerable considering SBC's like tinkerboard and miqi Currently - looks like all cores are following the same power/time domain - so one core goes fast, and the others follow, so sucks power and raises temps, and we get heat soaked quickly... Looking at the Rockchip docs, it does look like the RK3288 does have PD's for each core along with other logic... Six separate power domains for every core to support internal power switch and externally turn on/off based on different application scenario * PD_A17_0: 1st Cortex-A17 + Neon + FPU + L1 I/D Cache * PD_A…

Sorry bad English. I advise that I'm a noob. I have a MKS TS35 v2.0, that uses ST7796/ILI9341 (or ILI9486, I think) for LCD and ADS7843E for touch, and now I want to use it in my Asus Tinker Board for Klipper. I know that it's possible because exists one HOW-TO of this for Raspberry Pi 3b+. I wanna that someone, with knowledge in Armbian and Tinker Board, build (adapt) this DTS on GITHUB https://github.com/fbeltrao-br/mksts35/blob/main/mksts35v2.dts. I want this especially because the pinout https://github.com/fbeltrao-br/mksts35/blob/main/pinout.png, that is more easy for me understand what pins I need connect.

hello. I have a problem for quite some time on my tinkerboard. I do not know if it's a software or hardware problem. It appeared after connecting a special Raspberry USB Hub http://www.uugear.com/product/7-port-usb-hub-for-raspberry-pi/ I used this HUB on a raspberry 3b but he grilled the wifi chip (disappeared totally). I thought I had to grill the wifi chip of the tinkerbard like the raspberry but I can see the chip turn on from time to time. Today she has reappeared but "wlan0 not ready" in the network manager. sudo ip link show wlan0 wlan0: <BROADCAST, MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000…

Hi, i want to disable the "rockchipminiarm" sound card: root@innotune:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Audio [USB Audio], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Audio [USB Audio], device 1: USB Audio [USB Audio #1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Audio [USB Audio], device 2: USB Audio [USB Audio #2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: rockchipminiarm [rockchip,miniarm-codec], device 0: ff890000.i2s-i2s-hifi i2s-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 I wanted to add the module of the soundcard into /etc/modprobe.d/blacklist but i…

Hi, I'm trying to upgrade my armbian from 5.73 to 5.75 but without succes. I've checked in armbian-config if the updates are not frozen which is not the case. I tried : - sudo apt-get update sudo apt-get upgrade - sudo apt update - armbian config -> system - > firmware (update) I did accidentally installed Full firmware package but reverted to mini. kernel version should be ok : ARMBIAN 5.73 stable Debian GNU/Linux 9 (stretch) 4.19.20-rockchip And I'm not sure what else I can do to upgrade to 5.75... I would like to use the new drivers for the CPU so htop shows more info. Th…

Hi there, I have set up a tinkerboard S and I'm loving armbian so far. I only just encountered a weird problem. When i try to code in spyder3 there seems to be a messup in the keys i press and the key that is produced in spyder3. The funny thing is that this only occurs in spyder. When I type in terminal or gummi everything works fine. I am connecting to my TB using vnc using X. I've googled a bit around and found this could be a error of the XKEYBOARD as written here (I am however still not sure): https://github.com/spyder-ide/spyder/issues/3713 However I cant apply the proposed solution. I've found i need to go to /etc/X11/xorg.c…

Hi, I installed "Armbian_20.02.7_Tinkerboard_buster_current_5.4.28_minimal" at my tinkerboard and, in order to enable uart 4, I had to rebuild the kernel onboard (from linux-source-current-rockchip_20.02.7_all.deb). The uart 4 came alive but the processor serial number now is missing from cpuinfo (printing 0000000000). How can I bring it up again?

I had use QML to made some soft, and when i move those soft to Tinkerboard, it's Incredibly slowly... have any idea to fix this? did tinkerboard had open gpu acceleration? do i must change back to use QtWidget?

There's a way to change the framebuffer display resolution / refreshrate? Via HDMI my display work at 1920x1080 at 25Hz, i need to set it to 60Hz

HI all, first of all, I found thi sissue adopting a new board to the CSC tree, done by @balbes150. As it seems to be a problem of RK3288 in general, I post here, in case please move the topic to the approriate place. I have a JLD076 board, and started adjusting the DTS to the schematic. According to the schematic, and the TRM of RK3289, there is a maximum number of 160 GPIOs. This is also the number I get from my schematics. So I expected th get suitable number of pins from gpioinfo (bank:number 0:19, 1:4, 2:18, 3:28, 4:26, 5:12, 6:19, 7:24, 8:10). Instead, I get listed (0:24, 1...7:32, 8:16). I tried now to set ngpios for the &…

So those of us working on getting Retro Pie working on the Tinkerboard have run into a road block. Perhaps someone here might have a clue on this? Current using these instructions to build Retro Pie using the legacy Armbian Debian (4.4) https://github.com/Tinkerpie/Armbian-Setup And for audio over HDMI you need to currently make a change in /usr/share/alsa/alsa.conf setting defaults.pcm.card to 1 When this script linked down below: https://github.com/Rydra/bgm-for-es The BGM script takes over all audio so for instance the audio in games does not work or any other audio such as audio from the video sna…

Hi there Board, I have bought my Tinkerboard after some good research with my fellow techies at Red Hat and reading thoroughly that 19+pages Tinkerboard Thread. After crafting a super lean/mean kernel (kconfig at https://gist.github.com/rfrht/5f0fa113f12fbacf832e57ff4967785a ), I got a stable and lightweight kernel configuration. Things got a lot funnier when doing some compatibility tests with specific Asterisk versions, I was able to install and run cleanly a Raspi .DEB pkg. And that got me thinking. I have now JUST replaced the Raspberry Pi with the Tinkerboard. And guess what: It was a _inplace_ upgrade! Using the same u…

apt-get update / apt-get upgrad Armbian Xenial desktop mainline kernel 4.14, system failed to reboot and need a power reset to bring up. # uname -a Linux tinkerboard 4.14.34-rockchip #20 SMP PREEMPT Sun Apr 15 20:07:28 CEST 2018 armv7l armv7l armv7l GNU/Linux

Anyone have an issue where on a fresh install with apt update and upgrade I create a hotspot then have openvpn connect on boot. It works fine as a hotspot with 200mbps up and down but when the traffic is routes through a vpn by connecting openvpn the board will crash/become unresponsive if the upload is used heavily. Works great until I run a speedtest and on the upload the board will crash. Normal use is fine even pegging download causes no issue. Le potato s905x works amazing in this regard and never crashes period. Is this a known bug?

Hi all, I'm using for the Tinkerboard the mem freeze and resume methods; in particular using by the pins near the video connector (and a button) to resume the board. Is it possible to use other pins to achieve that? Thanks!

Does anyone know what to do to enable 1920x1200 resolution? I've done the xrandr newmode/addmode and it shows in the display app but doesn't work. At the command line... xrandr --output HDMI-1 --mode 1920x1200_60.00 xrandr: Configure crtc 0 failed The monitor and tinker board support 1920x1200 and it works with tinkeros.

Referring the MPP samples, i have got an application which can give me NV12 data. 4 instance(or threads) of this application will give me raw data, i need to scale all of them in a single screen. Is it achievable through Mali GPU with current development of userland/kernel driver? Also i need to perform composition. On that tiled screen, i need to show other semi-opaque(transparent) window. Which library can help me to do the same?

Hi, Got a Tinker Board and tried the 5.41 Xenial mainline 4.14.23 desktop -> https://www.armbian.com/tinkerboard/#kernels-archive Need to enable the I2S on 40pinheader connector for both playback & capture (192KHz/32bits) but I dont seem to find the info for this. Any help is valuable!

Dear Colleagues! In the I2S RK3288 interface rather limited number of timeslots of TDM (PCM). I try to use RK3288 spi as the subordinate controller for input and processing of a data stream of TDM (128 timeslots). Was - whether you have a practice of creation of spi of the driver for operation in slave DMA?. Perhaps for other chip. I will be glad to responses! Thanks!

Hello, I'm trying to setup a hotspot on a tinkerboard S running bullseye. Following the procedure from https://docs.armbian.com/User-Guide_Advanced-Features/ at the point where it requires: 2. Copy /etc/network/interfaces.hostapd to /etc/network/interfaces i realize the file interfaces.hostapd is missing, even though hostapd is installed hostapd is already the newest version (3:2.10-6~armbian22.02.3+1) I manually created the file with the following content even though I'm not sure if that's correct (as referred in one post on the forum): auto lo br0 iface lo inet loopback all…

Hello everyone, I'm using the latest Armbian version on Tinker board. I notice that if I dont use for a few minute then my monitor will go blank and I need to press any keyboard or mouse click to make a monitor works again. Is there a way to turn off that functionality ? I would like to keep my monitor on all the time. Thank you

Just reporting that there is some tx-offload bug in the ASUS Tinker Board Rockchip. I think I read about this issue regarding other rockchip/platforms when checksum offload bugs on large packets. When I run ethtool -K eth0 tx off I stop having issues with NFS over TCP The last part of diagnosis is when I forced a NFS crash by enabling tx offloading.

Does the armbian build come with 3D acceleration? Or is it 2d only?

Hello people, I am trying to set CPU Governors but all the cores change to the same clock and cpufreq-info reports "CPUs which run at the same hardware frequency: 0 1 2 3", with that even one thread working is making the CPU scale up all clocks and heat more than it should, is there a way to unlink them and each one have their own clocks according to each core processing load?

Hey! I recently got a CAN-bus up and running on a Tinkerboard running Armbian, but I've run into another problem here: The CAN-bus buffer fills up. After sending a few messages I get an error saying "No buffer space available". I've noticed that some other people are solving this by increasing the buffer size, but that seems like a weird solution to me. And it wouldn't really help me much. I need to empty this buffer when I read from it, or manually (without restarting the CAN-bus). Any ideas on how to do that? Thanks

Hello, I have several Hardware working with the Tinkerboard / S and like to propose those to the "Tested 3rd party hardware" section To whom can i address this? Thanks Roman

However, Armbian is configured to provide only spidev2.0, while TinkerOS can have spidev0.0, spidev0.1, spidev2.0 and spidev2.1 all enabled at the same time as long as you disable UART4 which shares GPIO header pins with SPI0. In the TinkerOS case, there is a config tool which edits a small and straightforward text file in /boot/ containing lines such as "intf:spi0=on" or "intf:uart4=off". The corresponding Armbian file seems to be /boot/armbianEnv.txt - possibly with overlays=... lines and DTS files. There also is a tool called armbian-add-overlay to load (at runtime?) DTS files...

Installed the desktop version of Armbian (bionic) on Asus Tinker Board S and noticed that the GPIO Pin 40 is always high on boot up. Please let me know whether this is high by default for any reason and if possible how to set it to Low while start up.

Whats the correct way to get the Armbian build to spit boot out as a separate fat partition at the start of the image? Im just getting started with Armbian (on tinker board) and want to integrate it into by own build system. I need to generates SD card images with 3 different configs building 3 separate installs sharing a common multiboot 512MB fat boot partition. I dont need the Armbian build to do the multiboot or manage the boot partition at all, I just want to be able to extract the root & boot fs at the end of the build process.

probably a post bragging of my christmas gifts, but mostly just documentation because it really confused and stumbled me from the get go so, my setup was powering tinkerboard (the first revision, without the new fangled eMMCs) via GPIO because it confused the hell out of me how to power this beast. this was powered through the XL4015 buck converter 12.1/12.2 V on input, with ammeter and voltmeter included on the board. (the board was current limited to 5A, because why not? the rk808 is 6A tops) ok from the get go the board powers (not load tested, just power through and run kodi-gbm UI) from 3.4V to 6.2V. undervolting or overvolting it doesnt shuts itself dow…

I confess, I have no idea what to do with the contents of this repository. Any help would be great, as I've said before, my Linux experience is lacking on things, the work I do is usually in hardware with kiB of RAM... I'm working on the assumption that this would be the best lib to install, if I'm wrong, let me know. https://github.com/rockchip-linux/libmali

Anything targeting the mainline will be getting 4.12 tonight, I can confirm some patch failures for Tinker Board/MiQi NEXT, Specifically: 0002-Adaptation-ARM-dts-rockchip-fix-the-MiQi-board-s-LED Was patched in the kernel. 9002_dts_rk3288_updates - Fixed and the packaging postinstall-scripts patch specific chunk: scripts/package/builddeb There is no "Provides:" statement.

If anyone has troubles with HDMI when using 5.x kernels, and has enough skills to recompile an armbian, give this a try : https://github.com/Miouyouyou/build And then either answer here, or in the bug report : https://github.com/armbian/build/pull/1887

Hey everyone I've compiled my own kernel using this awesome tool, and I'm now running it on a tinker board. Everything's been working fine, except for one annoying thing I just ran into: I can't use the GPIO pins. When I try to use a pin in python I just get this message back: "RuntimeError: This gpio is set to other function!". If I run Debian I can use the gpio just fine, but I need some kernel modules that doesn't ship with Debian. That's why I've compiled my own armbian kernel. Anyways, any idea on how to fix this? Any special module I should add when compiling the kernel? Thanks Marius

I downloaded the kernel source and kernel headers on a rk3288 rockchip (tinkerboardS) and noticed there was a mismatch between kernel version, armbian release and chipset (rockchip64) - see below. root@tinkerboard:~# uname -a Linux tinkerboard 4.4.174-rockchip #7 SMP Sun Feb 10 11:57:26 CET 2019 armv7l armv7l armv7l GNU/Linux root@tinkerboard:~# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=tinkerboard BOARD_NAME="Tinkerboard" BOARDFAMILY=rockchip VERSION=5.75 LINUXFAMILY=rockchip BRANCH=default ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage root@tinkerboard:/usr/src# …

Greetings, On the tinkerBoard, I'm using python. I having difficulty understanding why the functions don't return the values that is expected according tho the library help. I'm using python3 and the ASUS GPIO library. import ASUS.GPIO as GPIO GPIO.setmode(GPIO.BOARD) This is the output from ipython: In [18]: help(GPIO.gpio_function) Help on built-in function gpio_function in module ASUS.GPIO: gpio_function(...) Return the current GP…

sorry just switched my box for the first time in a long time. i was wondering if i can seamlessly upgrade to the latest Armbian without losing hardware acceleration included in RK3288/RK3328 Legacy Multimedia Framework or is it only for Debian Buster? is kodi-gbm (RKMPP) still viable? is there a compatible version much higher than 18.9 "Leia"? thanks!

Running Armbian Desktop stable 4.14y my Tinkerboard sees the WiFi network but refuses to connect. It has worked with TinkerOS so I don’t think it’s hardware related and Iknow the passcode and WPA settings look right. When I try to connect it spins and then fails after timing out. armbianmonitor -u output (with ethernet attached) http://ix.io/1x1J I’m probably just missing something stupid. Suggestions?

Hi! I'm using Tinkerboard S R2.0 in headless mode, but with LightDM (kiosk mode). It's connected to HDMI display, and I soldered display's backlight on/off contact to a relay that can turn on/off the backlight. I see that Amrbian turns off image output (launches screensaver as a black screen) after 10-15 min, but I could not find out where those settings are stored. Please help to find out.

I would like to setup NTPD with PPS but seems GPIO PPS is not yet supported. Anyone working on this?

Hello and thanks for reading. I have done some digging before posting this so let me explain my issue and then what I have tried. I am using the Tinker Board S (via SD card, had same issue using EMMC img also) with the Bionic mainline kernel 4.14.y (in armbian config tool it shows Armbian 5.60 Stable ) on an LG 24LF452B montior/tv with the boards HDMI port and no adapters. I have been trying to set the display resolution to 1366X768 or as close to it (it does not appear in the display settings menu natively) but cant seem to make this work. The display works fine on other resolutions, except for horrible image because the wrong resolution, and can be used on 1366X768 …

Hello Guys. สมัครสมาชิกufabet เว็บพนันบอลต่างประเทศ I want to extend the current kernel (Tinkerboard with rockchip-kernel-4.4.120 on Debian-Armbian) to include IR (GPIO) and DVB modules. What do I have to consider or is this possible with the usual run-through? (copy .config from current system, make menuconfig, make, sudo make install, sudo make modules_install) Is there possibly already a tutorial that I have not seen?

I build a kernel last night because I wanted a headless debian based system, not the nightly desktop available for download. Everything went well (almost*) until I tried installing NFS Apr 21 09:16:39 tinker1 rpc.idmapd[7408]: main: fcntl(/run/rpc_pipefs/nfs): Invalid argument Apr 21 09:16:39 tinker1 nfs-common[7394]: Starting NFS common utilities: statd idmapd failed! Apr 21 09:16:39 tinker1 systemd[1]: nfs-common.service: control process exited, code=exited status=1 Apr 21 09:16:39 tinker1 systemd[1]: Failed to start LSB: NFS support files common to client and server. -- Subject: Unit nfs-common.service has failed -- Defined-By: systemd -- Support: http:…