Software, Applications, Userspace

Hardware: Banana pi M2 Zero OS Armbian_community_25.5.0-trunk.185_Bananapim2zero_bookworm_current_6.6.75_minimal pyGPIO - A 'more general' python GPIO library from "chwe". Question: Could the below python script work for a safe "shutdown" of the MBI M2Z? _____________________________________________________________________________ #!/usr/bin/python # shutdown/reboot Banana Pi M2 Zero with pushbutton from pyGPIO.gpio import gpio, connector from subprocess import call from datetime import datetime import time # Initialize GPIO gpio.init() # Pushbutton connected to this GPIO pin shutdownPin = connector.GPIOp11 # Adjust based on your wi…

Hi, so far i used armbian on Orangepi board, now i switched to Rockpi. Is there a way to pass my work with a backup from one board to another? I already have the Orangepi backup, I thought about replacing only the boot part, is that it? Can anyone tell me if there is a procedure? A thousand thanks

This article describes how I successfully configured a PWM fan on an Orange Pi 5 Max running Armbian Debian Trixie Minimal vendor 6.1.115, using the opifancontrol utility. Special thanks to Jamie Sinclair for creating and sharing the opifancontrol project with the community. I have an Orange Pi 5 Max installed in a metal case and running several Docker containers, including Frigate, Immich, Samba, and others. The case originally came with a internal 30x30x10 mm fan, which was not able to provide sufficient cooling. Under load, CPU temperatures were reaching nearly 70°C. To improve cooling, I installed an external 40x40x10 mm PWM fan that was o…

I've delete all my home files for the root user by accident. So im having trouble with paths on my system now. Is there a way to restore the default home folder? Or are there a list of paths that I can restore for the profile or bashrc?

Hi all, what would be the correct way in recent Armbian distributions to bring up a CAN interface? As far as I'm aware NetworkManager does not support CAN interfaces Ifupdown somehow feels deprecated nowadays systemd-networkd.service seems to be masked by default Any insight would be appreciated.

I'm not sure where to report this. I think this is a common problem across distros for arm. I had this same problem with manjaro arm a month ago. On a fresh install of armbian. 24.3 cli. Emacs 28.x is available. It is missing a lot of elpa packages because of out of date gpg keys. It cannot find elpa.gnu packages. It is, for me, completely unable to load and use my emacs configuration. Package-initialize and package-refresh-contents do not fix it. I built the current emacs from source, it's version 29.3 and that works much better.

I tried to install OMV on Orange Pi 5 Pro with Armbian Community but it say can't. Is it still possible to install it?

Was using a 5.15.x version of Arabian on an orange pi 4, and upgraded to latest 6.7.x image seems to have broken low level usb (specifically USB to ACM devices). Used the following command to reset an STM32 device over USB (stm32 is connected directly to USB and shows up as a ttyACM0 device in linux) python -c 'import termios; termios.tcsendbreak(3, 0)' 3>/dev/ttyACM0 this worked great but now no longer does. Any ideas? Anyway we can test if its an updated driver issue by reverting to older usb driver or possible a kernel issue? Seems to be a Armbian specific issue, since ubuntu on amd64 system with 6.x kernel works fine …

Hello, everyone. I'm using Armbian_25.5.2_Orangepizero3_bookworm_current_6.12.30-homeassistant_minimal on 4GB OpiZero3. When booting from sd, the bluetooth controller is initialized correctly. I made a boot from usb-ssd via armbian-config: everything works fine, but the bluetooth controller is not initialized. /sys/class/bluetooth is empty. Switch back to sd - it works again. Boot from ssd - no. I compared whether it transferred the distribution correctly from sd to ssd - all files are the same. What could be the problem?

Hello everyone, I’m currently trying to develop an Electron-based application to run on the Orange Pi PC Plus (ARM platform), but I’ve hit a few roadblocks in the build process. My goal is to package and distribute the app so it can be run directly on this specific device, but I’m struggling with issues related to cross-compiling and creating binaries compatible with its architecture. Has anyone here successfully built and deployed an Electron app on an Orange Pi or a similar ARM board? I would really appreciate any guidance, tips, or recommended tools for accomplishing this.

So how do I totally disable so access once logged in doesn't timeout in 5 minutes putting machine in sleep mode which disables remote access too? At 16 watts, it can run 24/7/365.25 doing its job which is as a backup server. Thanks all.

Something went wrong while writing Armbian_community_26.2.0-trunk.7_Aml-s9xx-box_noble_current_6.12.58_cinnamon_desktop.img.xz to Mass Storage Device (armbi_boot, armbi_root) (/dev/sdb) When I made a boot with Balena Etecher, it turned out there was an error. Something went wrong while writing Armbian_community_26.2.0-trunk.7_Aml-s9xx-box_noble_current_6.12.58_cinnamon_desktop.img.xz to Mass Storage Device (armbi_boot, armbi_root) (/dev/sdb) I downloaded it from the link provided at https://www.armbian.com/amlogic-s9xx-tv-box/ The file I used was Ubuntu 24.04 (Noble) Cinnamon. When I finished flashing, Balena couldn't verify the …

Hi guys, i'm running transmission-daemon 3.00 on my orange pi 5 where there is installed Armbian based on ubuntu jammy. It works fine, but recently i've reached the number of 78 torrents that i'm downloading and seeding, i do not think it's an high number of files shared. Anyway after some hours that i start transmission-daemon i do not know the reason, it seems that is not downloading and seeding anything. I mean that the interface and the process are running and active but every torrent file it seems freezed. If i restart the process, everything start to work properly. I'm not an expert, if someone can tell me how to gather the logs i can share with you more inf…

I have Armbian on OrangePi One. It is connected to the TV via HDMI, and has a USB card with headphones connected. I installed LXDE on it via tasksel and found that only one audio device in the mixer is visible in software at a time: either hdmi if the USB card is disabled, or headphones otherwise. Is it possible to teach a microcomputer, like a desktop computer, to see multiple audio devices at the same time?

I am using the direwolf software on an old RPI 3 and would like to upgrade to a Bananna PI BPI M2+. Before Purchase the BPI it would be nice to se if anyone has had any luck running the software.

Java UIO Java UIO offers robust Java interfaces optimized for Linux Userspace IO, emphasizing high performance. Engineered from scratch, it leverages contemporary kernel APIs, libraries, and cutting-edge code generation methodologies, embodying a state-of-the-art cross-platform solution. Rather than reinventing established paradigms, Java UIO harnesses existing standards, avoiding redundant development commonly observed in other IO libraries. Seamlessly supporting JDK 25 LTS, this framework integrates Project Lombok to streamline code, enhancing readability and conciseness. 🌍 The 32-bit & FFM Reality With Java 25, there is no more s…

Hello, this is weird. With armbian 23.8.1 I can access the gpio-pins of the raspberry 4b. With (current) armbian 24.2.1 neither wiringpi (gpio -v) works nor any direct access (like echo "4" > /sys/class/gpio/export) The only difference I can find is the version of armbian. Please give me a hint on how to get gpio-access working with the current armbian. THX Edit: with raspbian it works (echo "4" > /sys/class/gpio/export and cat /sys/class/gpio/gpio4/value), so apparently I used the correct method.

After building many images, often there are combinations of kernel, sbc card and linux base that will just give an error, like this one: Getting sources from Git [ kernel:6.1 rk-6.1-rkr5.1 ] fatal: detected dubious ownership in repository at '/home/steven/build/cache/git-bare/shallow-kernel-6.1' To add an exception for this directory, call: git config --global --add safe.directory /home/steven/build/cache/git-bare/shallow-kernel-6.1 [💥] Error 128 occurred in main shell [ at /home/steven/build/lib/functions/logging/runners.sh:211 run_host_command_logged_raw() --> lib/functions/logging/runners.sh:211 run_host_command_logged() --…

I can't install mpd on Armbian v26.2 rolling for NanoPi Air running Armbian Linux 6.12.76-current-sunxi Packages: Ubuntu stable (noble) user@nanopiair:~$ sudo apt install mpd Reading package lists... Done Building dependency tree... Done Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mpd : Depends: libavcodec61 (&gt…

Hello there, i need help trying to get the touchscreen to work, i have the hdmi display setup working, touchscreen doesnt work. I am using: Banana pi M2 Berry and for the screen: 5 inch Resistive Touch Screen 800x480 HDMI TFT LCD i am running armbian jammy (old release) i have tried the guides (ik this is 64 bit i did the conversions): no luck

At the beginning, can I directly use rk's burning tool to burn Armbian firmware??

Does this forum support Kali in Raspberry Pi? Raspberry Pi Forums do not.

I have a Banana Pi M64 running Armbian 24.11.1 jammy, which has both a hard wired Ethernet connection and also WiFi. I have several other computers with both Ethernet and WiFi connections. I have my local DHCP servers set up to offer the same local IP address to both the Ethernet and Wireless NICs. For most (all but the Banana Pi M64 running Armbian 24.11.1 jammy) this is fine: both NICs get the same IP address and things work fine (generally traffic goes on one NIC). I do this in case I need to unplug the Ethernet cable (which would cause things to "fail over" to wireless). The Banana Pi M64 used to also be fine with the same IP address on both its Ethernet and its W…

Hello all. I have 3 pi5s running Armbian and 1 pc running windows10. Prior to changing from Bookworm to Armbian all boxes would communicate well with each other. Now only windows explorer communicates with the Pis. The Pis do not see each other nor Windows. I tried (almost) everything and nothing works. I could not get/install WSDD >>Package wsdd is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source Error: Package 'wsdd' has no installation candidate>> so I installed WSDD2 and made reference to it and still no go. Any sol…

$ gpg --keyserver hkp://keyserver.ubuntu.com --recv-key DF00FAF1C577104B50BF1D0093D6889F9F0E78D5 gpg: key 93D6889F9F0E78D5: 1 duplicate signature removed gpg: key 93D6889F9F0E78D5: public key "Igor Pecovnik <igor@armbian.com>" imported gpg: Total number processed: 1 gpg: imported: 1 graeme@NUC:/net/nas/Public/Reference/Computer/OrangePi$ ls Armbian_community_24.5.0-trunk.474_Orangepi4_bookworm_current_6.6.28_minimal.img.xz Armbian_community_24.5.0-trunk.474_Orangepi4_bookworm_current_6.6.28_minimal.img.xz.asc Armbian_community_24.5.0-trunk.474_Orangepi4_bookworm_current_6.6.28_minimal.img.xz.sha $ gpg --verify Armbian_community_24.5.0-trunk.474_Orange…

Hi, trying to download the latest images for amlogic-s9xx-tv-box and getting error 404 (except the last two files Plucky/Trixie at the very bottom of the page). Github seems to work fine. Firefox here, win7/win11. No problems with it aprox 2months back.. Any hint plz?

Hello I am using: Linux nanopineo 6.12.74-current-sunxi #10 SMP Thu Feb 19 15:29:56 UTC 2026 armv7l GNU/Linux PRETTY_NAME="Armbian_community 26.2.0-trunk.464 trixie" NAME="Debian GNU/Linux" VERSION_ID="13" VERSION="13 (trixie)" VERSION_CODENAME=trixie DEBIAN_VERSION_FULL=13.3 ARMBIAN_PRETTY_NAME="Armbian_community 26.2.0-trunk.464 trixie" i am tring to bind spi1 to fbdev. Here are the configurations: /boot/armbianEnv.txt: /boot/overlay-user/spi1-st7789.dts: SPI1 is not generating any CLK or MOSI signals on the physical pins. Looking forward for any help Best regards, Genadi

Hi all, recently installed this on OPi5, i would like to learn more about how to start utilising the GPIO to sense something like temperature alert of some sort or be able to add to the inputs and make something happen like send email alerts when something is triggered.. any suggestions ? cheers

2 Claudes 5 Agents, diff'ing, searching and boom we found it. "A subtle bug the vendor introduced and nobody upstream has fixed, in code you already live in. The RK3588 VOP2 port copied RK3568's layer-latch mechanism but dropped the one wait that makes it work — and mainline sidesteps the whole thing in hardware, so no one's ever going to fix it in the BSP but you. Be honest on confidence: the code defect is register-confirmed (high); that it's the flicker rests on the mutter-direct-scanout inference (medium) — which is exactly what the MUTTER_DEBUG=disable-direct-scanout test nails in two minutes." HW Acceleration came back, Address bars and Search bars se…

Hi, I'm using Armbian 24.11.1 bookworm with a V6.6.62 64 bit Kernel on a NanoPi Neo2. To debug, I have a UART/Serial-to-USB connector attached. Other end is on a Windows 11 box where I use Putty. The setup works fine with one minor issue. During the print of the boot messages, suddenly the printed line width of lines with [ <status> ] is limited 70 columns. It starts shortly after the Welcome to Armbian 24.11.1 bookworm! message and a "…" character is used to shorten the lines. This part has normal line length: Welcome to Armbian 24.11.1 bookworm! [ 4.922261] systemd[1]: Hostname set to <nanopineo>. [ 5.6…

My TV is being weird. I adjusted the taskbar so it’s not off screen, although I didn’t think about the minimize/maximize/etc being cut off. I tried looking around for a solution but didn’t find topics with solutions that worked. My TV is funky and doesn't have a video adjustment menu, so I can’t do that. And the resolutions available are supposed to be supported by my tv. Am I able to set screen boundaries, like a screen safe area so the display is not cut-off? If it’s not possible, it would make a nice feature.

Hi, I've just installed chromium on latest noble and some ffpg packages for. Unfortunately there are issues with Live Video Streaming, stucks and all green in between, None Live Videos seems to work better. It worked with the preinstalled firefox, unfortunately live video always stops after some minutes, while other stuff on websites around the videos continues. It's an rk3399 Board.

Hi all, Could someone recommend application with GUI to control the GPIO pins - turn off and on etc can be for RPi or OPi trying to make a remove access device to control a few things .

In most versions of Armbian, why does the device not log in anymore when I use VNCSERVER error and remains in the same initial login shell?

I've spent a couple of days googling and "all the AI'ng" this and I just can't find anything that will get my Orange Pi 5 or Orange Pi 3 Zero Pin 3 or 5 to do anything at all. First, I'm running: v25.2.3 for Orange Pi 5 running Armbian Linux 6.1.99-vendor-rk35xx (similar for the zero) $ ls /dev/i2c* /dev/i2c-0 /dev/i2c-10 /dev/i2c-2 /dev/i2c-6 /dev/i2c-7 /dev/i2c-9 $GPIO readall SDA.5 | IN | 3 SCL.5 | IN | 5 (it says OFF on the zero) $sudo i2cdetect -y 2 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- …

OK, so it actually was cold in FL for a couple weeks and I did a power hack. I ported Java UIO to Java UIO 2. Java UIO (HawtJNI) This was the "Old School" high-performance approach. It relied on a custom C wrapper and JNI to bridge the gap. How it works: You have to write a C helper file, compile it into a shared library (.so) for on ARM architecture (armv7l, aarch64), and bundle it in your JAR. The Overhead: Every call from Java to C has a "JNI transition cost." To minimize this, you used moveJavaToNative to bulk-transfer buffers, which added complexity to the Java code. Java UIO 2 (FFM / Project Panama) T…

When trying to upgrade my system yesterday, on bookworm, i saw: # apt full-upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages have been kept back: libnvpair3linux libuutil3linux zfs-dkms zfsutils-linux 0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded. See that zfsutils-linux depends on libc6 >= 2.38 : # apt show zfsutils-linux Package: zfsutils-linux Version: 2.4.1-1 Priority: optional Section: contrib/admin Source: zfs-linux Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net> Ins…

So after reading the docs I decided to build my own Armbian following the build guide chose resolute and edge to get a 7.x kernel and 26.04 lts like system seems to run fine - except 2 things 1) minor - the network activity LED on my turing pi2 board doesnt flash yellow - I can live with that as long as I see activity led flashing and I can ssh just fine 2) annoying- the turing-rk1 boards get hot but I have nice heatsinks and fans applied to them .. only the fans dont work - Following internet guides I send $ echo 255 | sudo tee /sys/class/hwmon/hwmon*/pwm1 which activated the fans for a few seconds .. then they stopped .. now according…

hi, What is the meaning of “UBOOT_TARGET-MAP=” in Armbian？ What is its function？ What does it do? Can you explain? help,help…

I know this might get ignored, but honestly, I don’t really mind. I just want to report something I noticed a few days ago, which I initially thought was caused by my previous setup. I was running a Radxa CM5 with a Waveshare CM4 Nano-C board, using an Armbian image for the Rock 5A. This was the only way I could get it working with mainline support. I’m aware this setup is far from standard I’m essentially using the wrong image but that’s because the Radxa CM5 IO board isn’t compatible with the Waveshare Nano board. On top of that, Armbian doesn’t officially support the CM5 RPi-CM4 IO board provided by Radxa (which does work with the Waveshare Nano, but their imag…

Sharing this here since it's a general-purpose tool rather than anything board-specific: GOESB is an open, reproducible benchmark for on-device speech-to-text — hash-verified results, official profiles + open packs so numbers are directly comparable across hardware, no account needed to submit. The problem it's trying to solve: if you're picking hardware for a local voice/STT workload, vendor numbers don't tell you much and blog posts go stale fast. GOESB is meant to be the place you can actually check "does this board run faster-whisper medium in real time, or do I need to drop to tiny and eat the accuracy hit." Right now the leaderboard is entirely x86…

Hello community! I’ve been a lurker for a while and recently flashed the latest Armbian Jammy onto a spare NanoPi NEO I had lying around. I'm currently designing a headless DIY time-tracking kiosk for a small local workshop using an RC522 RFID reader via SPI. Reading the RFID tags and logging the raw Unix timestamps (punch-in/punch-out) to a local SQLite database was the easy part. Where I'm getting a bit stuck is the actual backend calculation logic. I need the system to accurately calculate the daily net working hours, which means automatically deducting mandatory statutory breaks (e.g., 30 mins after 6 hours of work) and tracking daily overtime. …

Background - I have a Helios64 NAS with 4 x HDDs running Armbian 25.11.2 with kernel 6.12.58. The HDDs each have a ZFS partition but the partitions aren't imported. The OS is running from an sd card and logging is to ram. Power management and spin-down on the HDDs is disabled. Despite all this *something* is causing the heads to move every second or two. iotop shows no disk activity . lsof +d /mnt/sda etc. shows no open files and fatrace shows files in /usr and /var but nothing on /dev/sda etc. So, whilst it doesn't look as if any files are being accessed the HDDs are still doing something. The question is WHA…

If anybody needs a simple way to check text on the web or extract text from online PDFs on low‑spec SBCs, here is surf.py. It’s a tiny Python‑based terminal browser designed for boards like Orange Pi Zero, so you’re not completely blind internet‑wise even without a full browser. Starts with: ./surf.py domain.com Dependencies outside standard library: requests, PyPDF2. surf.py

Hi everyone, I'm running a few services on an Armbian-based SBC and need a reliable SMTP Service Provider for system alerts, backup reports, and application notifications. Has anyone here used SMTP Service Provider iDealSMTP with Armbian, or compared it with other SMTP solutions for lightweight ARM servers? I'm interested in deliverability, ease of setup, and long-term reliability. I'd appreciate any experiences or recommendations. Thanks!

Hello all, Starts with a blank screen and hard crashing, see fault log. Workaround is to use to download the deb. version as can be found on Github: https://github.com/armbian/imager/releases Greets crasharmbianKubuntu26.04

Hello, I was so happy to discovery your image and to reuse my Odroid. After installing the OMV 6.18.10 image, I noticed that no plugins could be installed, and later that even an "apt list" command fails. Please see some command line logs below: _ _ _ /_\ _ _ _ __ | |__(_)__ _ _ _ / _ \| '_| ' \| '_ \ / _` | ' \ /_/ \_\_| |_|_|_|_.__/_\__,_|_||_| v26.2.1 for Odroid N2 running Armbian Linux 6.18.10-current-meson64 Packages: Debian stable (trixie) IPv4: (LAN) 192.168.1.63 (WAN) 82.137.57.14 Performance: Load: 50% Uptime: 1m Memory usage: 7% of 3.69G CPU temp: 40°C …

Just did a fresh install of latest Ubuntu 26.04 Gnome build on a Pine Quartz64 A board. After an `apt update` running `apt upgrade` tries to update the `linux-libc-dev` package, which is downloaded from `ports.ubuntu.com`. However it consistently fails with a 404. Digging around a little, it seems like this package should match the kernel that's in use, so is the underlying problem that `apt` is trying to download it from the ubuntu repo instead of the armbian one where the kernel package comes from? I have not modified any apt configuration since installing.

For many Years I was using a wlan SSID containing a backslash with no problems. While trying the current Armbian_community_26.11.0-trunk.62_Bananapim2plus_trixie_current_6.18.54_minimal.img.xz the network wlan0 would not connect. Connecting to the guest wlan of the same router worked. I could trace it to the backslash in the SSID which "netplan try" complained about. Escaping that with a additional backslash made "netplan try" accept it, but the connection did not work, the interface wlan0 remained in status "state DOWN". Changing the SSID (removing that single backslash) made it working. I did not find something that prohibits the backslash use…

Hello, this is an already known issue. I hope I could help you. Running system on AMD64 crasharmbianKubuntu26.04

There is a previous topic on this from 2020, but it's closed and not much action was taken except discussing workarounds. I'd like to continue this. Looking at the kernel configs in this repo, many of them have CONFIG_RT_GROUP_SCHED=y. This does not play nicely with modern systemd (cgroups v2), breaking things like rtkit-daemon. See https://bugs.gentoo.org/569546 and https://bugzilla.redhat.com/show_bug.cgi?id=655321. rtkit is an important part of making pulseaudio and pipewire work smoothly, as well as for many other low-latency applications. There are a few currently available workarounds, but none are ideal: 1. Linux 6.16 or later has boot ti…

Some 4K VP9 videos — odd/Academy-ratio resolutions like 2970×2160 — hardware-decoded into a solid green frame on RK3588. Root-caused to a surface-stride alignment bug in the VA-API driver and fixed. Now it's a one-line apt install, no building from source. [ — same Pi, same video, green → clean 4K ] 📎 Full illustrated guide attached (unzip → open the HTML) · also online: https://defcom5-rockchip.github.io/rockchip-vaapi/ Q…

Well Well, Who's The Asshole Now? Yeah I Need a Job... I'm not too bad. Written for: the same readers as the finding, maintainers and users; the chart is built to be attached to it or to stand alone in a forum post. Ours versus theirs, same board, same 100-minute 4K 10-bit title, same afternoon, same kernel journal: frames out of 143,641decoder resetsspeed theirs, jellyfin-ffmpeg 8.1.3-1 with its bundled fork MPP100,13111,520~120 fps until it broke at 42:11 ours, system ffmpeg → rockchip-vaapi → upstream-lineage MPP143,6410106 fps, intact to the end The chart shows it in one glance: nothing missing anywhere for either unt…

Armbian Imager Update ends up treating onboard microSD card as system drive. Is it possible to make onboard sd card program as a system drive by changing the setting to allow system drives. However it still exposes newbie to possible risk of ending up the SSD. Please keep SD card slot as an exception to be treated as system drive.

https://github.com/sgjava/javauio2 Java UIO 2 is the next-generation evolution of the Java UIO project, rebuilt from the ground up to leverage the Foreign Function & Memory API (FFM). By moving beyond traditional JNI, Java UIO 2 achieves unprecedented performance and hardware-level accuracy for Linux Userspace IO. Engineered for JDK 25, it provides a cutting-edge cross-platform solution for modern embedded systems. You will see a huge improvement in performance on 64 bit systems, but I've also included a script to build ARM 32 JDK 25 with FFM which currently doesn't exist. https://github.com/sgjava/javauio2#arm32-support--modern-ffm-back-to-the…

Hi community! I'm facing with a problem on gstreamer using the lastest armbian release (minimal option) with my rockpro64. I try to play a mp4 video file with gst-launch-1.0 playbin uri=file:///home/adacast/default.mp4 as you can see in the attached picture there is a negociation capabilities with DMABuf but which has failed. is there any fixes for this? Regards Narcisse

I wanted to try out running a Servarr stack. I decided to go the usenet route, so I installed SABnzbd. It created "/armbian/sabnzbd" and three directories under that, "config", "download" and "incomplete", which matches the recommenations. Next, I installed Sonarr for TV, which created "/armbian/sonarr" and three directories under that, "config", "download" and "tvseries". While "/armbian/sonarr" and "/armbian/sabnzbd" are owned by my user, the "download" directory and "tvseries" directories were owned by root. So, I changed the ownership to my user, but it still wasn't working right. I read up on how these containers are supposed to i…