Beginners

Hello dear armbianites, I'm trying to make the hc1 optimization for the odroid HC2 board permanent, every time the kernel is updated, armbiam loses the optimization and an admin action is needed to apply the optimization again via ambianconfig > System DTB > optimized board configuration, followed by a reboot. My Odroid HC2 suffers from temperature sensor problems, which can be easily bypassed. But I avoid restarts of this server which hosts an OMV instance for personal needs. I understand that the /boot/armbianEnv.txt file passes the information to /boot/boot.ini, but this file seems to be overwritten when the kernel is updated! is t…

I am currently attempting to compile a device tree overlay, in connection with an OPi Zero 2. But my questions here are of rather general nature (with regards to DT compiling), so I posted it here. ------- Goal: Creating a DT overlay to enable certain hardware currently not working on the board: wifi and HDMI output. Alternatively, compiling a "full" .dtb file for the board, replacing the one currently used during boot. For completeness: In the below I experimented starting from the Armbian_22.08.7_Orangepizero2_bullseye_edge_5.19.16.img.xz image, 406585908 bytes. uname -a: "Linux orangepizero2 5.19.16-sunxi64 #22.0…

I am digging in my orangipi board (OPi Zero H2+) again, and have come across some questions relating to device tree overlay. Eventually, aim is to activate a hardware component of my board, and I think I have the right option found. Problems are currently with compiling and applying the overlay. From the basics upwards: 1. Is there a way to know which overlay (of the many listed in /boot/dtb/*) is actually used during boot process? For example, I know I have a board with a H2+ soc, but my armbianEnv.txt says "overlay_prefix=sun8i-h3". In any case, even this prefix cannot be the full information, since in /boot/dtb/ there are overlays fo…

Hello, First off, I'd like to thank the Armbian group for making my hobby a little more fun :) So I'm tinkering with gpio in devicetree, but I'm getting stuck. cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ with the excerpt from above, how/where can I find the description of 5 ?

Hello! Why if the device boots without eth0 physical link connection, and than when physical link is established, device do not get dhcp metric automatically, and network services needs to be restarted?

Quick question for the Banana Pro builds. I've tested with stable Armbian Bionic and Stretch. By default DHCP is disabled on eth0, so the following lines must be added to /etc/network/interfaces to get it to work: auto eth0 iface eth0 inet dhcp But, official docs (section Common features) state: Is having DHCP disabled for ethernet by default the expected behaviour for that board ?

I was search dhcp packet. using the wireshark program. but i was find that dhcp packet send to the random cycle(discover,renewal). I want to know the random time of dhcp packet. it's random time that random function in the source code.

My device is rtl8188cus

Hi, I am new at this platform. I want to know is there any difference between BIOS and manual overclocking? Can anyone give me a detail answer?

It doesn't differ (much). Major difference is that when you start with a Debian / Ubuntu you start with a DI (Debian Installer) and install Debian to some drive. That process is identical on all x86 Ubuntu based Linuxes. Only background / colours, configurations, perhaps an application / GRUB versions is changed ... We only provide "LIVE" image because of different hardware design / scenarios. Its more suitable this way. Once you login into Armbian, all tutorials and install cases will work the same way as they work on particular Debian / Ubuntu version https://www.digitalocean.com/community/tutorials with rare exceptions when application does not come with arm/arm64 b…

Hello, I attempted to port the dirty COW fix (https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=19be0eaffa3ac7d8eb6784ad9bdbc7d67ed8e619) for 3.4.112, and came up with this: https://github.com/SvenKayser/Sambooca-Kernel-H3/commit/543472582a6adcef12fae4ad11da72a62f29fb74.patch Apparently it solves the issue, but to be sure maybe some of you guys can give it a test. If it checks out please do commit it in the right places for Armbian - which I wouldn't know (Armbian has so many kernel patch folders, I don't wanna mess things up) Regards Sven

Hello, when I turn on my orangepi with armbian, it automatically logs me in and shows desktop. How can I please disable autologin and auto desktop? For example, on raspberry pi after boot I see just terminal with username and password, when I type these it logs me in and stays in terminal, and when I want dekstop environment I type startx and then I am in desktop. I would like to have the same behaviour on the orangepi (first headless after boot, I juust after then I should be able to login and choose to display desktop). Many thanks.

Hi, Following advice regarding the Ubunto 18.04 issue where RDP throws you back to the login window if an account is already logged into the console, I'd like to disable autologon to the GUI on my Armbian_5.75_Orangepilite_Ubuntu_bionic_next_4.19.20 installation. I've looked up a couple of similar questions on this issue on the forum already but I think the others describe disabling the GUI altogether, which I don't want to do. Is it just a case of setting the variable NODM_USER in /etc/default/nodm to equal nothing or 0 or something else? Thanks!

Hi armbian dev team ! Now I am using an orange pi pc h3 board. My problem is how to disable all boot text and splash screen on HDMI screen. I read serveral topic which discussed but i do not understand. I really need to help. Please help me! Sorry for my english skill.

Hello, I need to use the UART interface ttyS0 to connect other hardware, so I would like to disable its debug function, removing the console output that is directed to it. I've tried this: I commented the following line in /boot/boot.cmd: #setenv console "both" And compiled: mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr I was not successful, could someone instruct me on how to do what I want?

I guess this is hardware-independent, so I post here. Looking for ways to disable IPv6 I found 3 ways to achieve this on Linux, none of them really working for armbian debian build. 1. /etc/sysctl.conf: net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1 this disables the network interfaces to use IPv6, not IPv6 itself. This method is also known to cause trouble e.g with X-Forwarding via SSH and Postfix server. netstat still lists IPv6 entries 2. /etc/default/grub (GRUB tells the kernel not to load IPv6) This does not exist in armbian, I guess it is simply not using GRUB …

I'd like to be able to plug my laptop into the USB OTG port and use that serial connection to communicate with an application on the orange pi. The default configuration is to give me a login. What's the correct way to change the getty settings for ttyGS0? Thanks!

I'm building a device where fast boot time is essential. I've found that this: starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 USB4: USB EHCI 1.00 USB5: USB OHCI 1.0 USB6: USB EHCI 1.00 USB7: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning bus 3 for devices... 1 USB Device(s) found scanning bus 4 for devices... 1 USB Device(s) found scanning bus 5 for devices... 1 USB Device(s) found scanning bus 6 for devices... 1 USB Device(s) found scanning bus 7 for devices... 1 USB Device(s)…

Hi everyone. I want to disable UI permanent for armbian xenial. through armbian-config works once and after reboot UI still loads

I have a Banana PI M2 Zero that I am using to run a 3D printer. Unfortunately the USB port puts out 5V, which I need to disable. Is there any way to do this by editing a file or using a script? There are cases where it might be useful but I'd rather have it off permanently if thats the only choice.

Hey folks, The tl;dr version of my question is "is there a way to stop tmpfs from being used for things like /tmp, /run, etc.?" Essentially I have an OPi Zero running PiAware and graphs1090. Graphs1090 is throwing a bunch of images into a folder under /run, which is causing the amount of free space to drop below 16M. As a result, systemctl refuses to restart some services because there isn't enough free space on /run. So...is there a way to disable the use of tmpfs for folders like /run or /tmp? Honestly, I'd rather just take the hit to the SD card rather have to deal with issues like this.

Helo, I've just installed armbian on an Orange Pi box and using it just for remote VPSs, any easy way to disable the X windows graphical interface from the console ? thanks

Hi Does anyone know if it's possible to completely disable HDMI/GPU in fex? Thanks

Hi, I am using my armbian board to create an access point. I have noticed that WPS is always active by default and users are, especially on WIndows, prompted to enter the WPS PIn in order to connect to the WIFI instead of the pass phrase. I have checked wpa_supplicant.conf which looks like is controlled by dbus <!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN" "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd"> <busconfig> <policy user="root"> <allow own="fi.w1.wpa_supplicant1"/> <allow send_destination="fi.w1.wpa_su…

Hi, I need wifi working on an A20 board. Managed to compile the driver and change coherent_pool value to 2M and made everything work when booting from the SD card. After that I made a nand install using the nand_sata_install.sh script with minor modifications (partition+sizes). The system boots and everything is working right except the modprobe -v st7601Usta fails with exec format error. Dmesg says: st7601Usta: disagrees about version of symbol module_layout Recompiling the driver and reinstalling it does nothing. As I understand the nand_sata_install script uses the same linux image only converted from zImage to uImage. Shouldn't the…

In both Buster and Focal 20.11.1 on helios64 commands directed to a disk increment fields in /proc/diskstats This is incorrect and does not occur in the x86 version of xubuntu Focal 20.04.1. Specifically (see https://www.kernel.org/doc/Documentation/iostats.txt for field descriptions.): Check Power Mode increments "number of reads completed" Smart Return Status, Smart Read Data, and Smart Read Log increment "number of reads completed" and "number of sectors read" The smartd disk monitor uses these commands which makes the disk appear to be active to programs like hd-idle. The work-around is to set the inactive interval in hd…

I want to use orange pi pc plus for kiosk. Is there any way to disaplay own logo or any image during boot process instead for kernel messages. I have managed to disable kernel messages during boot up process but not it black screen. What changes should I make to display own logo or image during boot process insead of kernel messages.

Hi friends !! I Install the latest version of Armbian Debian for the TinkerBoard S but at the beginning I have the problem of seeing that the image is always distorted, it is similar to having interference, it had not happened before with other operating systems. It also sometimes turns off meaninglessly or the mouse stops working. THNX 4 todos !! ; o)

How to compile DKMS on the board? I am trying this for the past week without success and starting to go crazy... The last kernel which worked is 6.11.2. I tried with zfs-dkms (from apt's repositories and from manually build .deb from zfs git) and with aic8800 drivers. I've tried Bookworm image, tried Noble. Tried -current and -edge kernels. Tried many kernel revisions. Tried to build kernels (image & headers) with compile.sh with docker, without docker. Updated my x86 Debian to Trixie. Compilers are same on the build host and on the board: longanpi-3h# dpkg -l | grep -i gcc ii gcc 4:13…

Hi, since today the torrent downloader script "seed-armbian-torrent" on my seedbox fails to download the current "all-torrents.zip" from: https://dl.armbian.com/torrent/all-torrents.zip I then opened the link in my browser and I got a certificate warning (see attached). It seems the certificate for https://dl.armbian.com/ expired on 21. May 2022. Can someone confirm this, or is it an error on my end?

help with the connection orange pi pc

After my last update on my radxa5-ITX, apart from the name changes of the NIC (related?), I remarked that I could not cryptroot-unlock the root partition because of dm_mod apparently missing from initramfs. To give some context, this is how I set things up some while ago and things went pretty smooth until recently. Too bad armbian does not keep the previous kernel (though I get the reason why). Inspecting the boot partition, cat config-6.1.115-vendor-rk35xx | grep DM_CRYPT CONFIG_DM_CRYPT=m the kernel seems to have been compiled with the proper option and lsinitramfs initrd.img-6.1.115-vendor-rk35xx | grep 'usr.*cryptsetup' usr/lib/aarch64-l…

I have trying to run DMKS for Armbian, but I alway get this error. About to run dkms install steps... Creating symlink /var/lib/dkms/rtl8821CU/5.4.1/source -> /usr/src/rtl8821CU-5.4.1 DKMS: add completed. Kernel preparation unnecessary …

Hi, I updated from legacy kernel to mainline and then from jessie to stretch. Armbianmonitor -u output is further below. So far, the main issue is that after rebooting the DNS server is set to 127.0.0.1 thus loosing internet connectivity. Here is the output of resolve.conf (with manual setting the nameserver after reboot ) and the static network config. I am struggling to find how the dns server is set after reboot. I would appreciate if anyone could point me to a HOW TO. Minor issues: I can see only one cpu with htop, the ip address is not recognized at the ssh login screen, the opi pc is recognized as opi lite at the ssh login screen …

Setup: I have a small home network with several SBCs, PCs, NASs and two devices are running Armbian ARMBIAN 5.59, ARMBIAN 5.59 stable Ubuntu 18.04.1 LTS 4.14.65-sunxi for the Orange Pi Zero and ARMBIAN 5.59 testing Ubuntu 18.04.1 LTS 4.14.65-sunxi for the Cubieboard 1. The OPi Zero runs the PiHole application for the whole network. There's a MikroTik router which does DHCP for the network. Problem: The Armbian devices are not able to do a local name resolution, a `ping router.lan` or `ping orangepizero.lan` or `ping cubieboard.lan` from either device gives the error: "Name or service not known". A ping by IP is without issues, same pro…

Hello all, I'm using Armbian 5.73 stable (Ubuntu 16.04.5 LTS) for a year or so on an OrangePi Zero. That little box is working as a backup box and network-wise DNS server via DNSMasq (ver. 2.75-1ubuntu0.16.04.5). The OS and general system is working very stable, but I'm having issues with DNSMasq. It's solving both local systems' names via /etc/hosts and internet hostnames for the whole network. Sometimes, DNSMasq stops solving external addresses. There'll be no error and warning messages anywhere, and when pinged with kill -USR1 signal, it happily prints the current stats. I'm running with a cache size of 6148, and I see no cache overflows in the…

I am trying to migrate the two RockPro64 NAS's i have running the last Ayufan Community buster 9.14 minimum build from 2019 to a currently supported and maintained Armbian build. My current builds have become unstable and don't allow for any updates. The Armbian Buster 4.4.y build boots on my RockPro64 when the LSI 9211-4i board is not installed but does not boot when the board is installed. No error log to send. I also tried the Buster 5.10.60 image - no love. The ayufan buster minumum and OMV 9.14 builds boot and install the drivers (mpt2sas and mpt3sas?) for the 9211 and it supports the 4x PCIe and multiple drives well. I'm not sure whether o…

I want to attach I2C LCD

Hi, all I have a development kit board Snapdragon 8 Gen 2 SoC HDK 8550/SM8550/sm8x50. As understand it's more smartphone. Do we have support from Armbian for this board ? If so, can you provide me some info how to install it on sm8550 ? Currently, sm8550 has only fastboot and some AOSP images (u-boot, boot etc)

some one maybe know I have submitted Armbian support for khadas VIM1, what's the different? these images are built with patches/config from khadas (fenix), thus support all their devices. you can get it from Baidu Netdisk: URL: https://pan.baidu.com/s/1sJug0ykaioGUu_G7fDQ1rA Code: py8r 链接: https://pan.baidu.com/s/1sJug0ykaioGUu_G7fDQ1rA 提取码: py8r

On an Odroid C2 and Le Potato, both running Armbian 5.75, Docker fails to run hello-world when inside an LXD container, reproducible by running the following commands results in an error Spoiler apt-get update apt-get install snapd snap install lxd lxd init # set storage pool to dir , not xfs or btrfs lxc launch ubuntu:bionic docker lxc config set docker security.nesting true lxc config set docker linux.kernel_modules ip_tables, overlay lxc restart docker lxc exec ubuntu -- /bin/bash # inside the container apt-get update apt-get insta…

Hey guys so i'm trying to setup docker-compose with version 3.7, the problem is it seems it doesnt like version 3 at all! docker compose file: i have the ports set up, here appears as XXXX but i have 9000:9000 on the compose file Spoiler version : "3.7" services: portainer: image: portainer/portainer container_name: portainer restart: always command: -H unix:///var/run/docker.sock ports: - "XXXX:9000" volumes: - /var/run/docker.sock:/var/run/docker.sock - ${USERDIR}/docker/portainer/data:/data - ${USERDIR}/docker/shared:/shared environment: - TZ=${TZ} docker-compose --ve…

Does "orangepi3" also support Orange Pi 3 LTS? The board looks different from the Orange Pi 3 on the download page and has a different number of USB ports.

Hi, I am trying to get an armhf mainline image for rk3399 and another one for other amlogic socs (s9xx) to test panfrost and lima properly. Many propietary binaries/libs are armhf, also many dynarec are armhf only alongside box86 emulator. Ive tried several attempts with no success to boot. Chroots have been useful for now.. but aren't that friendly, also, multiarch its not that great on arm, mesa 32 and 64 goes in conflict all the time. ive read an old post about this topic. Essentially it said you need to create an image for a 32 bit board and replace the uboot and kernel, also, set the proper dtb.. ive tried several times, also edited other stuff on …

An Orange Pi R1+ LTS is on its way to me to replace the Orange Pi R1 that currently serves as my firewall (my fibre speed has increased and 100Mbps PHYs are too slow) The board is similar to the Orange Pi R1+ except that a NIC has a different chipset. Orange Pi R1+ LTS uses Rockchip rk3328 and has 1GB DDR3 memory and two 1 Gbps NICs. Compared to the Orange Pi R1+, the Realtek RTL8211E PHY has been replaced with a YT8531C PHY. The memory is also DDR3 vs DDR4. Armbian has WIP images for the Orange Pi R1+, but not the Orange Pi R1+ LTS. I guess that this could be a good starting point if I can figure out how to change the PHY.

.

Hi all, I'm new to armbian, I have a nanopi r4s SBC, and I want to know that if armbian nanopi r4s enabled(applied) `overlays-00-add-oc-opp-rk3399.patch` by default? i.e. https://github.com/armbian/build/blob/master/patch/kernel/archive/rockchip64-5.10/overlays-00-add-oc-opp-rk3399.patch I really need this patch to bootst up performance, otherwise I have to build armbian by myself.

Good day, I hope i'am posting into the correct subforum, anyway i just wanted to know if the armbian OS can support a USB Webcam, because I'm writing a research about the feasibility of this OS + plus board to be an alternative to laptops to cater basic educational operations like, video conferencing(google meet) , word processing , spreadsheet and presentation workload. Apologies to my written english as it's not my native language. Thanks! Mike

I saw someone using ZFS on their Netgate hardware and their eMMC fails in a year. Would BTRFS significantly shorten lifespan of eMMC/SD card, like ZFS does?

I started debian buster up and it started running through the black screen with non-graphics (doing this, doing that), then it got to ARMBIAN DEBIAN TTY1: login ... password. Is there a default login and password for this? If not, then there is something wrong with my download though I checked to make sure it was debian for orangepiplus2e desktop, and it is. This iso worked in the past and i have it saved on my ext hdd. UPDATE: I checked the checksum that I created with the checksum document that downloaded with the .img, and they are the same. I used "cp filename.img /dev/sdx" to copy the img to an microsd using a media c…

Not posting everything I've tried, just wanted to ask a question of people experienced with the H3. Does it really support slave I2S in the mainline kernel? I've seen it posted in multiple forums that it does, and the datasheet and user manual says it does, but I can not get it working. Has anyone seen this work in person? I had to hack up the sun4i-i2s.c driver around mclk / bclk generation to make it happy just to even try it, and confirmed that all register settings look good. But the DMA just doesn't seem to transfer data when in clock slave mode. It doesn't seem like any cpu using sun4i-i2s should work in clock slave mode.

I use Neo4 for media streaming using plex or minidlna. At first I don't know the problem but the movies played from it is lagging. My previous banana pi is better than this. I thought it is because of heating problem and normal for about an hour after shutdown for several hours. I also thought that may be it is my usb 3.0 hardrive adapter or maybe unstable minidlna. iperf result look normal with speed around 950mbps. This internal wifi is not detected but not a problem because I will not using it. I already tried using FriendlyCore, armbian ubuntu and then armbian debian. After using armbian debian, it starting to show its problem when the other os variant …

del.

Please help me to understand. When you install, it references incorrect versions of packages. Spoiler root@DOM:/etc/apt/sources.list.d# sudo apt-get install mosquitto Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mosquitto : …

I have tested different desktops, window managers, OS and kernels, but the problem persists. The problem: When I move a window on the desktop, the cursor icon flicks. If I use no GPU driver (LLVMpipe), no problem! Tested on; SBC: Odroid-C4 OS: Focal, Buster and Hirsute Desktop: Xfce, Mate, Gnome, LXQT Window Manager: OpenBox, Mutter, Xfwm4, Metaccity Panfrost: 21.0 and 21.0.rc5

Hey everyone, I'm eyeing the Orange Pi 6 Plus for some edge AI projects, given its 12-core CIX SoC, up to 28.8 TOPS NPU, and massive RAM options (16/32/64GB LPDDR5). Has anyone gotten Ollama running on it with NPU acceleration? Does it support it out of the box, or do you need to convert models (e.g., to INT4/INT8 formats) using custom tools like rkllama or similar? Additionally, with the higher RAM, can it handle bigger LLMs (like 13B+ models) more smoothly than lower-spec SBCs? Any benchmarks or tips on setups (e.g., Ubuntu/Debian installs, frameworks like MLC-LLM)? I'd love to hear real-world experiences—thanks!

Tested with speakers and headphones, now working right channel in 3.5 mm. Speakers and headphones works correctly with another devics. Tested on official builds(firstly), pulseaudio, pipewire+wireplumber, also tested self-builded via official building script with same drivers. Speaker-test detects only front left channel. What it may be? How I can fix that? Thanks in advance.

I have 1 Armbian installed in the SBC. I want to login but I don't have any idea what is the root password. I saw there are few methods of breaking it and can bypass / reset password. I noticed that this method is 1 of the easiest way, but it doesn't work. By editing /etc/shadow, root:$6$6fRIGsIb$dt.U84pEFgqpCSmlU9Nn2SLxBK8mYxxZMethrY35kqPg09aS/8e5xQ08excoGzdta6E5XmF2iFQC5J4EJVuM31:17401:0:99999:7::: daemon:*:17326:0:99999:7::: bin:*:17326:0:99999:7::: sys:*:17326:0:99999:7::: sync:*:17326:0:99999:7::: games:*:17326:0:99999:7::: man:*:17326:0:99999:7::: lp:*:17326:0:99999:7::: mail:*:17326:0:99999:7::: news:*:17326:0:99…

I have 1 Armbian installed in the SBC. I want to login but I don't have any idea what is the root password. I saw there are few methods of breaking it and can bypass / reset password. I noticed that this method is 1 of the easiest way, but it doesn't work. By editing /etc/shadow, root:$6$6fRIGsIb$dt.U84pEFgqpCSmlU9Nn2SLxBK8mYxxZMethrY35kqPg09aS/8e5xQ08excoGzdta6E5XmF2iFQC5J4EJVuM31:17401:0:99999:7::: daemon:*:17326:0:99999:7::: bin:*:17326:0:99999:7::: sys:*:17326:0:99999:7::: sync:*:17326:0:99999:7::: games:*:17326:0:99999:7::: man:*:17326:0:99999:7::: lp:*:17326:0:99999:7::: mail:*:17326:0:99999:7::: news:*:17326:0:9…

I am using the Rockpi 4c plus for the first time. I am also trying out Armbian (for the first time) and downloaded the latest stable version for my board (Linux rockpi-4cplus 5.15.93-rockchip64 #23.02.2 SMP PREEMPT Fri Feb 17 23:48:36 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux) Using armbian-config I selected in hardware configuration "spi-spidev". when my board rebooted, I checked the following: dmesg | grep uart This returns: [ 6.120938] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console I then tried dmesg | grep i2c and this returns [ 1.511705] i2c_dev: i2c /dev entries driver [ 1.564824] input: r…

Hello, I try to download beelink image (there is a 404 error) I know that this version is not supported but could amrbian team make these links work again ? Best Regards

I was trying to help a student download new C4 images and he gets 'Download Error.' Confirmed at my place - Twice I got 'Unable to download file securely' message but mostly 'Download Failed' on direct download. Didn't try all boards but several have same issue. Chrome on Linux x86 (Mint) and XU4 armbian. HTTP vs HTTPS on direct download? Didn't try the torrent downloads. Torrents work fine. Sorry if I put this in the wrong forum :] Edit: if I hit 'Keep' it still shows download error.

Since 12 hours it seem like the version of armbian-pine64so have changed. But the new link is broken. wget -P ./cache/armbian-pine64so-arm64/ https://dl.armbian.com/pine64so/archive/Armbian_20.11_Pine64_buster_current_5.8.16.img.xz --2020-11-27 09:58:19-- https://dl.armbian.com/pine64so/archive/Armbian_20.11_Pine64_buster_current_5.8.16.img.xz Resolving dl.armbian.com (dl.armbian.com)... 2605:7900:20::5, 173.45.128.12 Connecting to dl.armbian.com (dl.armbian.com)|2605:7900:20::5|:443... connected. HTTP request sent, awaiting response... 302 FOUND Location: https://minio.k-space.ee/armbian/dl/pine64so/archive/Armbian_20.11_Pine64_buster_current_5.8.16.img.xz [followi…

Hello, I'm trying to install Armbian on my OrangePiZero but i have networks issues. After 3/4 hours of tests and search i found on a forum that the problem came from the kernel version. And the person said it works with: "Armbian_5.30_Orangepizero_Debian_jessie" Where can i download this rom please ? The problem: When i start my OrangePiZero i don't have ip (i use USB/TTL to access to command line). I tried to set static ip, dhcp, i tried to remove networkmanager, to use dhcpcd instead of dhclient, etc... I also tried wifi, but same... Thanks !

Download section for Orange PI One Plus ( https://www.armbian.com/orange-pi-one-plus/ ) appears to be malformed / cut-off somehow at second image (Jammy XFCE) where content ends after "h" from "SHA hash ..." line. I checked out download sections for few other boards of interest to me and they all appear to be fine 🤔

Hi. My download speed is so low over ethernet. Speed must be 19Mb/sec, but real speed is 7-8Mb/sec. download speed on armbian download speed without armbian Tell me what is my problem?

Then sudo apt-get update gives: [..] W: Failed to fetch http://apt.armbian.com/dists/jessie/InRelease Unable to find expected entry 'main/binary-armel/Packages' in Release file (Wrong sources.list entry or malformed file) E: Some index files failed to download. They have been ignored, or old ones used instead Am I doing something wrong? Please, how can I fix that? cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepipc BOARD_NAME="Orange Pi PC" VERSION=5.25 LINUXFAMILY=sun8i BRANCH=default ARCH=arm IMAGE_TYPE=stable

Hey all, The DreamCatcher Board had an armbian image (Linux dreamcatcher 4.10.14-sunxi #21 SMP Sun May 7 22:37:19 UTC 2017 armv7l GNU/Linux) that worked fine, doing a apt upgrade completes, but prevents the system from booting... any insight to resolution is appreciated.. Currently were putting holds on the following for updates... linux-dtb-next-sunxi linux-headers-next-sunxi linux-image-next-sunxi linux-firmware-image-next-sunxi error... U-Boot SPL 2017.03-armbian (May 07 2017 - 22:36:09) DRAM: 512 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2017.03-armbian (May 0…

Hello everyone. I have to change drivers code in ./cache/sources/linux-mainline/linux-5.10.y/sound/soc/codecs/ Which is the best way to compile a single sound driver without building all the kernel and without lost modification. I would like to work in my Ubuntu pc build Armbian directory.

Hello, since my good friend and favorite tinkerer Olgierd wanted to run this http://www.ebay.com/itm/1-44-Red-Serial-128X128-SPI-Color-TFT-LCD-Module-Display-Replace-Nokia-5110-LCD-/262136737086?hash=item3d08912d3e%3Ag%3AwyQAAOSwoydWoYhX on his OPi, but the drivers aren't in the 3.4 kernel I did that https://github.com/SvenKayser/Sambooca-Kernel-H3/commit/3511b0d142f4632f77cd1d82bae08bc584f54805.patch It isn't art, but it's working (or so he said). Alright, there seems to be a timing issue when loading the module for the first time.... Feel free to use it to your repo if you feel like using it. Regards Sven

Hi, there is a question as selected to install the driver on the linux-3.4.112-sun7i ? I am a beginner and also sorry for my english.

Anyone succeeded in compiling drivers mt7601 on odroid c2? Following a guide on this forum i was able to compiling them for OrangePi PC, but the same procedure is not workink on c2. Many thanks

Hello, i recently recieved my orange pi 4 lts and the idea was to use it a both media server and SmartTV features replacement. Sadly, using browsers to play Kinopoisk (russian streaming service) was a flop, no browser i tried can use or implement Wadevine decently. I tried Vivaldi, Firefox and Chromium/ How do you it with Netflix, if you do it at all. Any advice, what can i do?

Good morning, I have made a board where I have put an RTC DS1307 to a Neo core nanopi. From what I have been able to see, the system loads some kind of RTC module called sun6i-rtc. this module "occupies" the / dev / rtc0 so when loading the DS1307 it assigns it / dev / rtc1. Can the sun6i-rtc be disabled in some way? On the other hand, if I do this command. hwclock -w -f /dev/rtc1 --verbose hwclock from util-linux 2.37.154-c2ca2 System Time: 1625751906.401974 Using the rtc interface to the clock. Last drift adjustment done at 1625751901 seconds after 1969 Last calibration done at 1625751901 seconds after 1969 Hardware clock is on UTC time Assuming har…

Hello, I'm trying to get a new board working using Armbian. I'm currently working from my GIT repo so I cloned armbian/build and u-boot/u-boot I added them to the compile.sh script by using userpatches/lib.conf overrides. I added the DTS file of the board, defconfig and modified the Makefile as it can be seen on this commit On the board config side, I set: BOOTCONFIG="fly_gemini_defconfig" The image is built successfully but the board doesn't boot because the DTB file isn't present in /boot/dtb/allwinner/sun50i-h5-fly-gemini.dtb I looked in output/debug files but I didn't found any error What did I miss ? …

Dear all, My system logs: http://ix.io/2Pgj I consistency get a crash with dtc on both orangepi, nanopi neo+2, nanopi neo3 when I try to see the current devicetree via the filesystem, e.g.: $ dtc -I fs /sys/firmware/devicetree/base/ <stdout>: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name <stdout>: Warning (clocks_property): /soc/spdif@1c21000:clocks: cell 0 is not a phandle reference <stdout>: Warning (clocks_property): /soc/spdif@1c21000:clocks: cell 2 is not a phandle reference .... /dts-v1/; / { [1] 16929 segmentation fault dtc -I fs /sys/firmware/devicetree/base/ …

Hi, Since yesterday's new 4.8 kernel announcement was having at least one Allwinner CPU supported with I2S in a DTS include file, (sun7i-a20.dtsi), I hope some knowledgable brilliant minds will come and give a similar solution for H3 and the many today's boards that contain this CPU. Christos

Is it possible to have two operating systems on a SD card with provision to select the OS at bootup (e.g Grub), or selecting OS for next bootup at shutdown ? Rein.

hi there we would like to have armbian and android in the same sd card , and access android only from armbian . is it possible to have two partitions each have its own OS and loading android by rebooting from armbian terminal for example ? i have seen a similar case in RetrOrangePi which can switch between armbian and arcade emulator from armbian

Hi We are using the Tinker Board with RK3288 for a project and we need to be able to have VGA&HDMI Dual Display Function Please tell me how we can do it like on this video: https://youtu.be/iBCp-QhJuAw We are using Linux 4 Thank you

Hello! I was very happy, when the first OrangePI came out and had HDMI and VGA output. With this device it was possible to use the board with two monitors (mirror desktop and expand desktop) I use this board as thin-client in our office - connecting to windows server via rdesktop. Another way we use the boared is working with one monitor via rdesktop and running with the other Monitor or TV-Set a webpage witch is displaying infos. It is running perfect and we can save money because there is very low energy consumation and the OPIs are cheap. I think this kind of using the OPI wourd have good future. Now this board is no more availabe. I am not a tec…

Hi, I tried your Debian/minimal/IOT for NanoPi 5RC, it's great, I would like to use it. However the RTL8822CE driver only exposes wlan0 and there are no parameters to set, and I need two wlans. For reference there are two wlans available in the core debian image from FriendlyARM/ELEC. Best regards.

Hi, I'm using an Odroid C2 with 8 DVB-C/T (6x TechnoTrend TT-TVStick CT2-4400 and 2xTECHNOTREND TT-connect CT2-4650). Those DVB-C are connected via 2x 4 ports USB 3.0 which are connected in USB C2 ports. The problem is that if I'm using 4 or maximum 5 DVB-C, Odroid C2 has a CPU usage about 30-40% from 400%, so pretty low usage. Now the issues are starting: if I'm trying to start another DVB-C or if I'm doing for example something which uses high CPU suddenly Odroid C2 is rebooting. This is the first thing. The second thing is that the DVB_SKY_2 seems to crash when the mumudvb is starting on a DVB device. The third issue is that I can't change …

Hi I need help.I search forum but i cannt find anything. I am using dynamic ip from my isp. I am making hosting server. Everything works great but when i configure email server from this link https://www.digitalocean.com/community/tutorials/how-to-run-your-own-mail-server-with-mail-in-a-box-on-ubuntu-14-04 so i need to install bind. The issue is is it possible to write automatically dynamic ip address in the host file? I am using cubieboard 1. Please tell me or put me the the right track.

Using my Orange Pi Zero 512 H2 I want wo build a POE-powered display, displaying the current time, time until the bus leaves and ideally some information on bus schedules I can pull from the API of the local bus network. What I currently have is an Orange Pi Zero 512 H2 and a POE injector where I can insert any voltage as it does not run with standard POE voltage. My plan is to buy this e-paper display https://www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(B) and have the Orange Pi display a simple HTML page. So my first question is: Would this display run, would it be a good choice for my setup? Are there any similar projects (yes, I searched) that…

Hi, I have following error on Rock64 when trying to update with apt tools: -1- My config file is : root@srv-rock64-130:~# cat /etc/apt/sources.list.d/armbian_apt_v_9_stretch.list |grep -v "#" deb http://apt.armbian.com stretch main stretch-utils stretch-desktop -2- to get all keys, i run ... /usr/bin/wget \ --tries=3 \ --output-document=/tmp/Release.key \ --quiet \ --no-check-certificate \ http://apt.armbian.com/armbian.key \ && \ /usr/bin/apt-key add - < /tmp/Release.key \ && \ /bin/rm -f /tmp/Release.key root@srv-rock64-130:~# /usr/bin/wget \ …

Is it possible open ttyUSB0 with 115200 baud rate but its work incorrect and getting error about incorrect baud rate, example after newline character I lose data

Hello all, I am wondering if anyone had any experience compiling e2guardian on armbian? I am using a Banana Pi Pro running 4.19.38-sunxi. I am having compilation issues with gcc mostly parameters provided being incorrect (e.g. -V and -mno-sse2). PS - I know there is an e2guardian package already available but I need to one with a specific configuration that doesn't exist in the one in the repo. Thanks

I'm creating this topic to track progress with support for EachLink H6 support. So far with patches in lines 127..202 in List of patches with patch files I was able to get: working: -boot with mainline 5.4 kernel -HDMI video (with correct DDC) -HDMI audio -Ethernet -GPU mali t720 -USB2/USB3 ports -CPU temp reading -DVFS (CPU freq scalling) -internal IR sensor (MCE remote works nicely) not tested: WiFi Blutooth This box might be cheap H6 box to become nice mediaplayer as current panfrost started to support really well t720 (I've got fully working GLES UI, playback with OpenG &a…

I've been messing with my OPi5+ for several days now and I cannot for the life of me get my USB Wifi dongle to work. When I input " lsusb " the OPi shows my dongle as plugged in but it just doesn't work. I've tried to compile the Wifi dongle drivers (RTL8188eu) manually but that fails with a "python2 error". I've tried updating the Armbian headers and firmware and nothing works. I've tried both the OPi OS and Armbian OS and on both images the board will just not read my Wifi dongle. My USB Bluetooth dongle Plugs and Plays just fine, only the Wifi dongle is inoperable. So my question is how in the hell do I get the Edimax N150 USB Wifi dongle to work…

I have just downloaded desktop Armbian 22.08 Jammy XFCE on my Odroid-C2 and it works fine on a 1080p monitor. I need it to work on a different monitor though so I have added the following lines to /boot/armbianEnv.txt display_autodetect=false hdmimode=1680x1050p60hz and added hdmitx=forcergb in the bootargs (which I copy/pasted from /boot/boot.cmd) but it has no effect. My monitor works with these parameters on Hardkernels Ubuntu 18.04 image. What else do I need to do?

Hi all, Is there any reasonable way to login into Docker container and edit u-boot sources without running ./compile.sh script every time when container is created ? Is there any option to just create container and log into it ? I created Docker container by running command: ./compile.sh docker BOARD=bananapi BRANCH=next KERNEL_ONLY=no KERNEL_CONFIGURE=no RELEASE=stretch armbian Docker image is created. Now I want to edit some sources in u-boot directory but when I am running docker run -it armbian bash it immediately runs ./compile.sh script. I did check entrypoint definition in Dockerfile but still can't figure out how to actually …

edited

Hello everyone, First timer here. I enabled the wlan0 interface on my Orange Pi zero 2w and am able to connect to the internet. However, I am not able to connect to it via SSH or even ping it, (cannot resolve host). I'm using the minimal image available here: https://www.armbian.com/orange-pi-zero-2w/ I followed the docs to configure wifi as pointed out here: https://docs.armbian.com/User-Guide_Networking/#connecting-to-wifi-network Currently I'm stuck on how to debug it further. I tried to ping other devices from within the orange pi and it works without any issues. Any advice is very much appreciated

Hallo liebe Community, ich versuche, da es kein aktuelles jammy release für meinen M1 gibt, eines mit Ubuntu zu erstellen. So wie es in der Dokumentation beschrieben ist. Allerdings kommt immer wieder ein abbruch: ERROR in function install_deb_chroot Und dann wird der Prozess terminiert. Warum funktioniert das denn nicht?

Anybody try to install emby server on armbian? I try to use this howto: LINK But I get dependecy error: Can somebody help?

Hi I have a5x tv box.Rk3328 chipset. Iam Accidently broke the emmc chip.Damaged. Right now can't boot on sd card. I think need the disable emmc chip on to the dtb file.How can ı do this? I connect tx rx cable to uart debug tool and i get the this log. DDR version 1.13 20180428 ID:0xFFF In DDR3 786MHz Bus Width=32 Col=11 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=4096MB ddrconfig:3 OUT Boot1 Release Time: Feb 2 2018 15:41:39, version: 2.46 ChipType = 0x11, 141 SdmmcInit=2 0 BootCapSize=0 UserCapSize=0MB FwPartOffset=2000 , 0 SdmmcInit=0 0 BootCapSize=0 UserCapSize=7580MB FwP…

hello guys ! I'm working with armbian 5_14 and orange pi plus 2 . I'm using the only eMMC and I'd like to make a backup to an SD card What is the best way to do that? Thanks and ciao Walter

Hi, I am looking for a way to emulate x86(windows xp) on the rk3399.I know it is a arm64 and it wil only use one core there for it wil be slow/bad performance....I dont care its for a low demanding administration tool that i wrote a few years a go for windows that id like to run on the rk so i can put my main pc in storage. On youtube i found some guides 1/ExaGear tried and failed dependency missing or not compactible 2/QEMu Tried and failed: vnc running on .......... (network adress) But no Gui to been seen anywhere qemu-system-i386 -L . -hda nt4.cow -net nic,model=pcnet -net user -cpu pentium -soundhw all -vga cirrus -m 3G -cdr…

Hello, I'm pretty new to Armbian world and still trying to learn how everything works. I have got this Asus Tinker Board R2.0 that I'm trying to use with an Armbian image. However, before flashing the Armbian image to SD and boot from it, is there any way I could emulate the system on my PC, boot from a fresh Armbian ROM, change my preferred settings and install the applications I want, and then transfer the whole "personalised" ROM to an SD and boot from it on my actual Tinker Board. If I need to "initialise" the fresh Armbian ROM on the actual Tinker Board, can I then use the SD card (or an img created from it with Win…