Beginners

Dear Experts We have hikey boards and we building the ARM 64 and 32 debian toolchain on ububtu 16.0.4 pc. Please can you help me if I can get help getting the relevant toolchain to build the same. Thank you in advance Protocoder

How to enable desktop in Armbian Stretch mainline kernel 4.14.y IMG ??

Everyone loves Etcher, but they all have x86 hw ... https://github.com/resin-io/etcher/issues/1688 https://github.com/resin-io/etcher/issues/1993 Anyone have Etcher running on arm?

Clean Installation of Armbian Stretch mainline kernel 4.14.y to the internal memory of the Orange PI 2018-05-10 09:38:51: (mod_accesslog.c.180) writing access log entry failed: /var/log/lighttpd/access.log No space left on device 2018-05-10 09:39:21: (mod_accesslog.c.180) writing access log entry failed: /var/log/lighttpd/access.log No space left on device 2018-05-10 09:39:22: (mod_accesslog.c.180) writing access log entry failed: /var/log/lighttpd/access.log No space left on device 2018-05-10 09:39:52: (mod_accesslog.c.180) writing access log entry failed: /var/log/lighttpd/access.log No space left on device 2018-05-10 09:39…

hi, I've got a strange Bug with apache2 webdav. Everything works. Read Files, Write Files change Names But i cant delete Files. If i move the File into a Folder i can delete it with the Folder. But i cant delete the File it self. Any Ideas what the Problem is. It cannot be the client i think because it works with other webdav folders. Spoiler cat apache2.conf # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.4/ for detailed information about # the directives and /usr/share/doc/apache2/README.Debian about Debian specific # …

Hi,o My old laptop doesn't have wifi lan card. So, i wont setup Orange Pi Zero as extend wifi lan card, or wifi bridge? wirlesss to wired ethernet How to ????????????????

i want instal peerflix on Armbian_5.41_Orangepiwin_Ubuntu_xenial_default_3.10.107_desktop, i've install first nodejs from synapsis and after install nodejs -v -> 4.2.6 i run npm -y install peerflix and if return the error message : peerflix --help /usr/local/lib/node_modules/peerflix/node_modules/parse-torrent/index.js:257 ;(function () { Buffer.alloc(0) })() ^ TypeError: Buffer.alloc is not a function at /usr/local/lib/node_modules/peerflix/node_modules/parse-torrent/index.js:257:24 at Object.<anonymous> (/usr/local/lib/node_modules/peerflix/node_modules/parse-torrent/index.js:257:35) at Module._compile…

my ISP blocks port 80 so I need to use something like port 82 for a server I want to run from my house. In the ISPConfig control panel there is a setting under Sites -> Webdomain -> Options where one can change the http and https ports but that does not seem to do the trick. On one experiment I chanaged the listening ports in the nginx config but then none of the things like wordpress would run once installed. So what is the 'correct' way to change the listening port for all servers on an Armbian box running ISPConfig / NGINX installed from armbian-config? It works great but I break it every time I try to fix the port issue by instructions I'…

I got the stable release of armbian for the ROCK64, flashed on a sd-card aaaaaaaand ... wrong password. root + 1234 doesn't work. Has the password been changed? I tried the following combinations: root:1234 ROOT:1234 root:!"§$ (german keyboard, don't know whats on en) armbian:armbian rock64:rock64 All passwords are incorrect. I try it with xenial and strech. (Files of the direct download)

Hi! while waiting for the raspberry pi camera module I wanted to play around with a PS3 eye camera I have. My intention is using it within ROS because I am interested in the high framerate this camera offers. Has anyone got this camera working in Armbian? If not, what would be the steps for installing the driver? Thanks!

Hi i'm using the "Win32DiskImager" to backup my sd card(8GB), file size almost 8GB after read from sd card. my question is, how to backup sd cad into image file and get small file size also. like downloaded form " armbian" web . Board: Orange Pi Zero

Hello! I'm using a SinA33 board. In its MMC from the factory is installed Android. I compiled ARMbian for it. ARMbian is loaded from SD. I installed ARMbian in MMC (nand-sata-install) But when I boot from MMC - an error ... Spoiler HELLO! BOOT0 is starting! boot0 version : 3.1.0 reg_addr 0x01f00100 =0x00000000 reg_addr 0x01f00104 =0x00000000 reg_addr 0x01f00108 =0x00000000 reg_addr 0x01f0010c =0x00000000 reg_addr 0x01f00110 =0x00000000 reg_addr 0x01f00114 =0x00000000 DRAM DRIVE INFO: V1.4 DRAM CLK =552 MHZ DRAM simple test OK. dram size =1024 card boot number = 2 card no is 2 sdcard 2 l…

[ 11.799225] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, de v addr: 0x48) [ 11.804169] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x48, de v addr: 0x48) when using i2c-bus,there is too much log in the dmesg, how can i disable this kind of log ?

I've been able to use all the other user space I/O without being root. PWM on the other hand seems to create files only after opening device. Is there a udev rule that will work with 4.14 kernel? For all other devices I use a simple rc.local script: chown -R root:gpio /dev/gpiochip0 chmod -R ug+rw /dev/gpiochip0 chown -R root:gpio /dev/gpiochip1 chmod -R ug+rw /dev/gpiochip1 chown -R root:i2c /dev/i2c-0 chmod -R ug+rw /dev/i2c-0 chown -R root:spi /dev/spidev1.0 chmod -R ug+rw /dev/spidev1.0

I have installed mate-desktop-environment and enabled lightdm display manager. But there is no choice of session ( XFCE or MATE ) ls /usr/share/xsessions .: mate.desktop xfce.desktop manually created user-session=mate in etc/lightdm/lightdm.conf add sessions to .dmrc but nothig help there is no session choice

Hi, I have search in the internet a long time but can't get an answer for: Can I start a Armbian Cubietruck Image on my Ubuntu-Linux (x64) with QEMU? What I tested: a) I downloaded "Debian Server Mainline" (Kernel 4.14) from https://www.armbian.com/cubietruck/ b ) Mounted the Image and extracted "vmlinuz-4.14.14-sunxi" and "initrd.img-4.14.14-sunxi" c) Try to start the Armbian Image on my x64 Linux with: qemu-system-arm -m 1024M -M vexpress-a9 -kernel ./vmlinuz-4.14.14-sunxi -initrd ./initrd.img-4.14.14-sunxi -append "root=/dev/mmcblk0p1 rw rootfstype=ext4 cgroup_enable=memory swapaccount=1 enforcing=0 console=ttyAMA0,1…

A coworker of mine gave me a 5 inch hdmi touchscreen (waveshare knockoff). Getting hdmi to work properly on my orangepi pc was done in a few minutes. But the touchscreen drives me nuts. It came with a xpt2046 so I loaded the ads7846 driver I compiled from fbtft. No error messages, but also no response to a touch. It took me a week to finally realize that not the wiring, the driver or Armbian is was the problem, but the touch digitizer was. So I ordered a new one on my favorite Chinese site and installed it on the lcd. Finally I got a response to touching the screen, but I was not able to calibrate it with xinput_calibrator. After manually calibrating it …

Can someone PLEASE guide me how to get rid of the lousy build-in desktop and switch to MATE_

I wanted to share my workaround of setting the proper resolution on both, console and Xorg: Display: Generic 5 inch 800x480 HDMI "Waveshare V2" clone Kernel: mainline Proper/usual way of doing it: 1. Edit uboot/dtb display variable -> does not work currently because only a few resolutions are supported (848x480 is the closest). 2. Add a new mode with "xrandr" and "gtf or cvt" -> but "cvt 800 480 60" does yield a modeline which totally glitches out the display. Possible workaround: 1. Set linux console to 800x480: "sudo fbset -g 800 480 800 480 32" 2. Edit or create something similar to "/etc/X11/xorg.conf.d/01-a…

I have been trying to install armbian and run from usb flash. every time i can get through the installer (it usually freezes at 2 3 or 4 percent when it does make it all the way it hangs on reboot. i have tried different usb drives even a cf card. also i read the instructions on which image to use but i am lost as to which one is which. i understand the small images are the headless but the desktop versions i am not sure of the differences. here is a list of the available images. i don't understand the differences in the versions. archive2018-04-05 14:013.9 GB nightly2018-01-28 16:29609 B Nanopik-s_Ubuntu_xenial_next_desktop.…

Hi, I'm first time to lean that " Orange Pi" and Debian Linux system, I have two questions. 1. How to change that the scree picture or character after typing user name/password. 2. How to starting my own program after system boot-up finished. My program is connect to copy machine it will catch that using status and send back to server. Thanks

If you want to get ahead of the curve a little I've been testing libgpiod master with User Space IO. This version includes Python bindings, so I'm no longer generating CFFI bindings for this library. I've converted all the example code to use the new bindings. User Space IO is Python 3 and Java 8 bindings for Linux user space GPIO, SPI, I2C, PWM and Serial interfaces. User Space IO is a consistent API for C, Python 3 and most JVM languages. No more hacked up RPi.GPIO and WiringPi for each SBC model.

I need to count frequency about 1 Khz on GPIO input pin. Is it possible and what is the best way to do this? Tried WrinigOP isr.c but no luck. Thanks.

I've just finished using the build tool to create an Ubuntu 16.04.4 LTS (kernel 4.14.34-sunxi) image for this Orange Pi Zero, booted from SD, logged in, and everything was going fine. Then I: Added the following to /etc/modules: g_ether gadgetfs dummy_hcd Upon rebooting the board, my iMac Pro host popped up the UI from Parallels to ask me if I wanted it connected to the Mac or VM, then the machine kernel panicked. It panicked again upon reboot until I unplugged the board. I had zero panics before I made this change. I then inserted it into my MacBook Pro and that machine panicked as well. Here …

Hi, We are testing our orange pi one in critical external environments like warehouses, manufacturing and other. In some cases, even if the good case there is a misconnection between the sd card and the orange pi one. Connected in ssh i can access the orange pi but a lot of command cannot responde anymore, like ls, top, htop, tail and others. Even the reboot shows me the input-output-error, and the only way to reboot the hardware is using "echo b > /proc/sysrq-trigger". When this happens, i tried create a cron with 'at' or background jobs using sh like './script.sh &' with the content "echo b > /proc/sysrq-trigger" but still not works. …

Hello i am french user of Orange Pi Zero. I am looking to compile a version of caliber more resent than that of deposits. A priori git sources are not for arm. I found a recipe on arch linux arm here. Someone will know the suitable for Armbian? thank you very much https://archlinuxarm.org/packages/arm/calibre

I am planning to buy a SopineA64 set of modules and the Cluster board. (clusterboard) I would like to know if someone here made a cluster. I would like to create it with Armbian since I am an enthusiastic Armbian user. I would like to create a real cluster and not a list of computers unified by a board. I mean to have the disk united and ram united. Something of real cluster computer. Sorry for my english.

Hello, I installed Debian server mainline kernel . Everything works but I am not sure about temperatures. This is output from armbianmonitor -m: 07:03:05: 1200MHz 0.00 1% 0% 0% 0% 0% 0% 55.5°C 0/8 07:03:10: 1200MHz 0.00 0% 0% 0% 0% 0% 0% 55.7°C 0/8 07:03:15: 1200MHz 0.00 0% 0% 0% 0% 0% 0% 55.9°C 0/8 07:03:20: 1200MHz 0.00 0% 0% 0% 0% 0% 0% 55.9°C 0/8 07:03:25: 1200MHz 0.00 0% 0% 0% 0% 0% 0% 55.1°C 0/8^ Is it ok or is too high ? Thank you.

Hi. I problem with the board banana pi r1, I've installed a couple of system on it, but I can't get the ip address from the router, I have a banana pi m1 and with the same image it works, but when I remove the sd memory and install it on banana pi r1 and it doesn't work. The bpi-r1 is broken the ethernet port or something like that? When the bpi-r1 starts running turn on the green light in the ethernet port, that doesn't happen with the bpi-m1 model. any idea, I've installed with the debian installer, but is the same problem, the ethernet doesn't work when I am configuring the net

Hi dear friends, We are working on a project with nanopc t3 plus. We need to enable USART in this board. In three OS (Linux, Linux kernel , Android) we can not enable this feature. We need an example or sample with USART enabling. Thanks in advance.

Hi, could anyone tell me how to disable pek short interrupt in mailine? I've already tried with "i2cset -f -y 0 0x34 0x42 0x01" but with no success. Any help would be much appreciated. Thank you

Would I be using a 2-amp adapter instead of a 5-volt 3-amp? Is this a disadvantage?

Hi everybody. I have an orange pi board I change the hostname to balabla. But when I connect it to the network and use IP Scaner, it will display the ip adderss of the orange panel. How to display host name instead of IP address?

Hello I really like armbian's 4.x kernel because it doesn't heat up as crazy as 3.x's. I was trying to install Seafile on the Odroid C2 using the instructions here https://forum.seafile.com/t/seafile-server-on-arm64-aarch64-working/1405 However I'm getting the following error ./setup-seafile.sh: line 492: 2045 Illegal instruction (core dumped) LD_LIBRARY_PATH=$SEAFILE_LD_LIBRARY_PATH "${ccnet_init}" -F "${default_conf_dir}" -c "${default_ccnet_conf_dir}" --name "${server_name}" --host "${ip_or_domain}" At first I thought that this was obviously a problem I should find help at at Seafile, but upon further testing I did not e…

Hi sir, I want to interface the r305 finger print module with orange pi zero with uart serial communication can i get the code using c and please help me its urgent

My 32GB SD Card have problems and i have buy new one. I have use Acronis True Image 2015 to clone the one Card to the other but the new one does not boot. Why????? Every normal Computer does cloning work with new Harddrive and now that Problem!

Hi, New to this forum. Hope someone can please assist. I recently purchased a tiny 5" display UMPC device. See instagram/puterpi for photos. There's also YouTube video of it in action by maker too. I installed Armbian image: http://forum.banana-pi.org/t/bpi-m2-zero-new-image-2017-12-04-armbian-5-36-m2-zero-ubuntu-xenial-next-4-14-3-desktop-preview-buildbybpi/4325 Overall, works great. However, I periodically get the following error message at boot up in console and device will not boot up. Only fix I have now is to res-install image file. missing environment variable: boot file Retrieving…

I am trying to save my new iptable settings using sudo sh -c "iptables-save > /etc/iptables/rules.v4" but after a reboot the changes are not persistent can anybody tell me the correct location? Thank you

There is a topic in allwinner subforum about the instability of the kernel 4.14.18 on some allwinner devices. I got that stability issues on my banana pi m1, and notice that the last kernel available on armbian still the 4.14.18. Today I also run apt upgrade on raspberry pi 3 and it installed the kernel 4.14.30 that stop the ipsec vpn working, the same as in 4.14.18 used on armbian. I feel some frustration on the latest kernel updates, and wondering if anyone have some info about the next kernel update that solve this issues. Do you advise me to change to nightly builds to get a new kernel to test?

Hello I am using cubieboard 1. I have 3 problems 1) How to format sd card and auto mount when the cubieboard starts? 2) How to store mariadb database and www folder in sd card? I dont have enough space in nand. i want mariadb stores database in sd card 3) How to configure freedns afraid?

Hi! I need some help! I want to create a clone of my existing card in new card to use it with another board (same model), how I can do this? I'm not very expert, this is my first board. Basically I need a two identical system in two identical board based on first card which have all file installed

Pretty simple question, I know a few years ago the temps provided by armbianmonitor were off by 10-15 degrees celsius, is that still the case today? Or are those temps accurate in newer versions of Armbian?

I'm using the image Armbian_5.38_Orangepizero_Debian_stretch_next_4.14.14.7z. My NetworkManager version is 1.6.2-3. Certain NetworkManager options like wifi.scan-rand-mac-address=yes or wifi.cloned-mac-address=random for NetworkManager results in not being able to connect to a wireless Access Point anymore via nmtui. On the other hand, manually spoofing the MAC address via ip, ifconfig and macchanger and using nmtui afterwards works in all three cases.

Hey. I have a banana pi m2u (Allwinner A40), I created a debian stretch console image, but ethernet interface does not work. The eth0 interface is not visible in the system. Could you say what could be wrong?

Hi, I started using Lime2 recently. I am using Openwrt with Lime2. I am powering the board using LiPo battery. I could not find a way to find the battery level. I use SSH to communicate with the board. Is there any script or way to find the battery level through SSH. Help please.

First of all, I'm a complete novice to Armbian so my apologies if any of the following isn't up to the standard of this board. I've just installed Armbian 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi on a Banana Pi. The same computer was previously running a domain controller under Bananian just fine. Installing Samba on Armbian works fine: r oot@Linux08:~# apt-get install samba attr Installing the packets to operate Samab as a DC also works fine: root@Linux08:~# apt-get install winbind libpam-winbind libnss-winbind libpam-krb5 krb5-config krb5-user However, attempting to provision a new Active Dirctory d…

Hi there, I am new to the community, but read it for quite a while. I try to bring my own smart mirror project to life. So far everything runs good and I am pretty impressed with all the efforts you guys put into Armbian. There is one little thing that I can't solve my own (due to limited coding capabilities). The supported resolutions doesn't offer the one supported by my 10,1" Tontec display. It is connected via HDMI and offer a resolution of 1280 x 800px. Where 1280 x 720px work it stretches the content, which makes small copy unreadable. I found several threads where users discussed about this resolution. Would it be possible to make this reso…

Hi , how a start use armbian with banana pi zero h2+ ? For frist i need compile kernel ? Have one article for help with more information ? I need use xfce with rdp desktop, is possible use ? Thanks all help - brasil - pt-br PS : this board : http://www.banana-pi.org/bpi-zero.html

An hour a go I powered down my Neo Core 2 and now I can't get it to boot properly. When I hook it to the serial Monitor this is the output. It tries to load the "-fixup.scr" file in the /boot/dtb/allwinner/overlay folder but of course this is not available. With the extfls command I searched the folder and those two files would be available: sun50i-h5-fixup.scr sun50i-a64-fixup.scr The "sun50i-h5-fixup.scr" would be the right one for my processor however why does it choose "-fixup.scr" instead? Here is the boot sequence output: Spoiler U-Boot SPL 2017.11-armbian (Mar 20 2018 - 14:52:25) DRAM: 1024 Mi…

Hi Guys i searched the forums but could not find anything too similar. Any advice would be welcomed. Summarised version I am currently trying to install the OrangePiPC Debian Server image of Armbian on a custom H3 board emmc and getting a kernel error (Gave up waiting for root file system device. Common problems . Please see serial log at bottom for full information. TLDR VERSION Objective To install armbian directly onto the emmc. Board Information Board acquired from a manufactorir. It has USB_OTG, eth, Uarts, emmc and some other ports but NO SD card slot. Using OrangePiPC as it seems the most similar. How I am Installing 1…

I just downloaded the March 26th nightly of Stretch for Rock64. Getting the following error running apt-get update/apt-get upgrade: E: The repository 'http://beta.armbian.com stretch Release' does no longer have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. root@rock64:~# Re-imaged with a new Flash drive and still getting the same issue. Is there a problem with beta.armbian.com tonight? Thanks!

Hi, I searched around for any new info on the 3rd USB port (header pins next to the 40pin header) and couldn't find anything new than the 2016 post that found its existance, the rest I found was acknowledgement that the H3 has 3 real USB ports, I am trying to enable this port since it seems it isn't enabled by default even in the latest Armbian, how exactly can it be enabled, the whole script.bin change from 2016 got me confused, is it the usb3host option in armbian-config? Edit, spoke too soon, even though the info is missing actually, it was the usb3host in armbian-config>system>hardware, I had the pins the wrong way, D+ is on the outside. Also w…

I made a kernel upgrade which was not successful The kernel does not boot up. Unfortunately armbian does not contain a fallback method to load the old kernel. Therefore I need a way to restore the old kernel. I copied a working boot folder from another sdcard which does not work. What did I miss?

Hello! How to fix hdmi overscan for retarded tv, is it possible? H3 OPi + Armbian Stretch Desktop last night's Nightly I tried setting overscan_x/y in armbianenv.txt and u-boot and a display-mode line including them, didn't work. Does it need extra settings, like disabling edid or some order of settings?

Hello, I have been using armbian for a couple of months now developing a small product, and this is my issue... When the OS boots, it gets directly to the Desktop environmet and never asks for a password (unless for a supervisor function form the terminal) I need one of the following options... 1) OS ask for password before let yo do anything on the desktop 2) It boots onto a console and ask for password (then you can manually start the Desktop) Any Help will be apreciated..! Best Regards

I just did a Python 3.6.4 build using all 4 cores, and it handled beautifully. You can see where it switches from a single core for the ./configure into all for cores for the make -j4 altinstall Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 21:41:30: 1200MHz 1.00 26% 8% 17% 0% 0% 0% 57.2°C 0/8 21:41:35: 1200MHz 1.24 27% 9% 17% 0% 0% 0% 56.4°C 0/8 21:41:40: 1200MHz 1.22 26% 8% 17% 0% 0% 0% 57.1°C 0/8 21:41:45: 1200MHz 1.21 26% 8% 17% 0% 0% 0% 57.2°C 0/8 21:41:50: 1200MHz 1.27 26% 8% 18% 0% 0% 0% 57.4°C 0/8 21:41:55: 1200MHz 1.25 26% 9% 17% 0% 0% 0% 57.6°C 0/8 21:42:00: …

I ran "apt-get dist-upgrade" on armbian 8.8 and got 8.10. Then I ran apt-get install linux-dtb-next-sunxi linux-headers-next-sunxi linux-image-next-sunxi Now the system has been busy with Setting up linux-headers-next-sunxi (5.41) ... Compiling headers - please wait ... for four days - since friday morning. The system is actually running make & gcc, with changing PIDs so it really /does/ something. I just wonder how long this is gonna take. Hardware is a Banana Pi Router R1

Hey guys, i installed open media vault on my helios4 as described here: https://wiki.kobol.io/omv/ works like charm =) But now i also want to use nextcloud or owncloud and tried to install it ontop of omv, i followed this guide: https://www.technikaffe.de/anleitung-255-installation_und_konfiguration_von_openmediavault_inkl._wake_on_lan The problem is the nginx Server does not work, i can't access the page in my browser. Anyone here had success installing nextcloud or owncloud?

Where is the linking between the WiFi state and the LED defined? The NEO Core has an inconsistently on LED on the Core/Air image and I believe this to be the bug.

I don't use any uart port ttyS1, ttyS2, ttyS3 on ubuntu_lxde_desktop_OrangePipcplus_v0_9_1.img os on OrangePiPcPlus board. I Used some software as minicom, gtkterm .. but don't anything happen on TDX, RTX pin. when run command line folow $ gpio readall Help me please.

Hi guys, I Love Armbian mainline as docker host, no problems yet apart from below one. I am Running Orange Pi Zero (first generation), latest Ubuntu mainline, upgraded, latest docker + latest minisatip image 1 USB DVB-C TV stick T230 + latest V4L firmware CPU shoots to 100-ish % for all 4 cores when I try to tune, no picture. Then I found this out by accident : while upgrading the kernel and tuning at the same time : It helps to have more CPU load, so : I made a bash script to load one core 100%, avoiding I/O (htop confirms 100%) And now tuning works : 2 FTA HD channels ( 30Mbps ) looks pretty good. Temp is no problem, CPU o…

There is a syntax error in the default created file. # armbian-config created source /etc/network/interfaces.d/* # Local loopback auto lo iface lo init loopback # Interface eth0 allow-hotplug eth0 no-auto-down eth0 iface eth0 inet dhcp That's on stretch or jessie.

I am running a Plex Media Server on a headless Orange Pi PC Plus with Armbian Ubuntu server. So far I’ve been able to configure fstab on the server to mount the NAS at boot. That seems to work fine. However, the problem I have is when I have a power failure and everthing reboots at the same time, the server boots before my NAS. I then have to ssh in and run “sudo mount -a”. Is there a way to have the server detect and mount the NAS whenever it’s available to the network?

Đồng hồ treo tường Rhythm CMG749NR13 – Sắc anh đào quyến rũ Nhiều người có quan niệm rất sai lầm về đồng hồ treo tường, rằng đó là những chiếc đồng hồ có màu sắc cổ điển, với những con số truyền thống. Với đồng hồ treo tường Rhythm, những người quan tâm đến đồng hồ chắc chắn sẽ có cái nhìn khác về vật dụng thiết thực trong ngôi nhà của mình. Nổi tiếng là tinh hoa thời gian của xứ sở mặt trời mọc, đồng hồ treo tường Rhythm CMG749NR13 mang dáng vẻ bên ngoài vô cùng quyến rũ, đặc biệt có sức hấp dẫn với phái nữ dịu dàng, quý phái. Đồng hồ treo tường Rhythm CMG749NR13 mang sắc hồng đào quyến rũ Vượt ra ngoài những bảng màu đen trắng ha…

So I'm seeing this up as a media device for my aunt who has nothing but an old crt TV. So I tried h3droid for user ease, but it's not near stable enough and crashes whenever anything is running any load on the cpu. Retro orange pi gives her a desktop and easy interface for watching movies/tv shows and playing old games. The problem I'm running into is I can't get any media file to play. I get sound but no visuals on Kodi and VLC I've tried converting the files from mkv to MP4, I've tried changing codecs h.264->h.265. I don't know what to do because she will never understand/use a command prompt so I wanted to hook her up with something easy.

hy, i know it's off topic but i don't know where i can put my quesiton. so i have a Bananapi m2 with bananian =>> there are two partition : boot ( mmcblk0p1) and root(mmcblk1) Can i add another root's parition(mmcblk2) and switch between the two root's partition? 'V£ ^‰UÐ?, L _E#Ö D #-------------------------------------------------------------------------------------------------------------------------------- # Boot loader script to boot with different boot methods for old and new kernel # Credits: https://github.com/igorpecovnik - Thank you for this great script! #----------------…

Hello, I'm trying an installation of Mastodon instance on tinkerboard running with Armbian OS. I follow this topic : https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Production-guide.md the last command i ran was bundle install -j$(getconf _NPROCESSORS_ONLN) --deployment --without development test it returned me : Fetching: hiredis-0.6.1.gem (100%) Building native extensions. This could take a while... ERROR: Error installing hiredis: ERROR: Failed to build gem native extension. current directory: /home/mastodon/.rbenv/versions/2.5.0/lib/ruby/gems/2.5.0/gems/hiredis-0.6.1/ext/hir…

Hi, I realise the NeoCore is not yet supported, but I hope someone can help me with a problem that I am having using the GPIO as buttons. I would like to use the gpio marked GPIOPA13,P A14, PA15,P A16 and PA2 I think these are used by the UART and SPI - I don't require this functionality. I think I have to modify the fex, I have looked, but do not want to kill my system Isit possible to use those gpio? Can someone point me in the right direction? TIA. J.

I am using ARM Cortex A7 board and had run coovachilli with its internal DHCP server successfully with external and internal splash pages. Now want to run it with external DHCP server that is clients will get IPs from external DHCP server and authenticate via Coovachilli. For example two boxes running coovachilli in it seperately but the client from both boxes will get IP lease from same backend dhcp server while authenticate via its coovachilli respectively. So I have used this config in it: HS_WANIF=eth0 # has address 195.19.214.216 HS_LANIF=eth1 HS_NETWORK=10.2.3.0 HS_NETMASK=255.255.255.0 HS_UAMLISTEN=10.2.3.1 HS_UAMPORT=3990 HS_UAMUIPORT=4990…

Hello, I've not found an Armbian version which states compatibility with Banana Pi M2 Zero. Is there a compatible version? My first guess would be the Banana PI M2. Is that so? I've tryied to search the forum but all I've found is something about compilation. Please help.

Hi can anyone help. I've got CSF firewall running on my Helios4 and I keep getting emails saying that rsyslog isn't running. I checked the logs and it seems stuck at this error: liblogging-stdlog[10738]: action 'action 11' suspended, next retry is Sun Mar 11 15:36:43 2018 [v8.24.0 try http://www.rsyslog.com/e/2007 ] Is there any fix for this? Thanks for any help

Hi everybody: I'm having problems to compile a custom user overlay on ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi. I tried to install linux-headers-dev-sun8i like said on https://www.armbian.com/kernel/, but i receive the folowwing error: Kernel headers are not installed properly. Please install the kernel headers package so, my one option is to install linux-headers-next-sunxi, but as i'm using the stable version the compiled custom user overlay only works if i switch to nigtghly automated builds using armbian-config tool. all help will be welcome. Regards, Mauricio F.

Hello, I am running as usual my orange pi one plus H6 ALL WINNER with ubuntu server and cannot find my exFat HDD on it, it detects the usb but not /dev/sda and cannot mount or access it, yes I tried with ntfs This is what I see (image below), should be 232 GB HDD connected via USB, sata is not an option What should I do?

Hello! I followed build instruction from github, builded full OS image to flash to microSD and get kernel oops on boot (selected orangepiwin->dev(4.14.x)->xenial->server) log: https://pastebin.com/G4UtkGPR Possible to fix?

Hi, I use a cubieboard2 and have (due several SD crashes) added a small SSD using the nand-sata-install script. I wanted now to install iptables - but it complains about iptables -nL modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.10.12-sunxi/modules.dep.bin' modprobe: FATAL: Module ip_tables not found in directory /lib/modules/4.10.12-sunxi iptables v1.6.0: can't initialize iptables table `filter': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Checking for the version I get uname -a Linux cubie2 4.10.12-sunxi #…

Hi everybody! Need some help with understanding of some stuff in my Orange Pi zero. I have next issue: I have Orange pi Zero and Huawei4510 3g usb modem. Orange pi do some measurement and send them on server. All this stuff works great.But: my provider have session limitation(3 hours). After 3 hour i lost my orange pi from netework, but i see that 3g modem lighthing as he have connection.When i turn-off modem from usb and plug it again, he lighthing that he catch network, but services doesnt sent data. i'm using wvdial for managing network connection over 3g modem. I have script whitch reload wvdial…

Hello! This thread here: https://forum.armbian.com/topic/3728-varlog-varloghdd/ triggered the question in me how I could extend the log2ram. My problem is the following: I have installed syncthing. The default in armbian runs it as root - which is not recommended for syncthing, see here: https://forum.syncthing.net/t/running-syncthing-as-root/6316! So I downgraded the syncthing daemon to a standard user account "syncthing". In order to enable a non-root user to write logfiles it's common practice to create a subdir /var/log/syncthing/ and give it write rights for syncthing. This works, however my logfiles stay completely empty! Never…

Hi, I downloadded the latest debian_stretch_next for OPZ+2 H5. Yes, I know it's experimental and not production-grade, I just want to report the issue. The problem is that apt-get (dpkg-deb) fails to decompress deb archives during the upgrade procedure. Tried it on a clean install multiple times on different microSDs. Are the packages really corrupted or is there something wrong with the image? Error log in the attachments P.S.: ubuntu_xenial_next randomly panics during apt update. h5.txt

Hello, I use orange Pi (Armbian_5.38) and would like to know how to us my hp Officejet 4500 G510g-m. I tried pyinstane but get error : Pillow-4.0.0-cp35-cp35m-manylinux1_i686.whl is not a supported wheel on this platform. tried all files. And also tried SANE and my printer is showed with this command: sane-find-scanner but nothing with this one: scanimage -L Thank you!

So I tested Kodi playing different demanding video files (H256), and it works smoothly, without crashing at all. So far the most stable media center option. But yes, we have no ethernet. So I was wondering how could we load the basics drivers from the Xulong image, into the PineH6 one. So I browsed for hours (because Im not at all familiar with this android weird partitions system, and with the OS itself). First I realized both Pine H6 and OPiOnePlus use the same ethernet controller (the realtek 8211). Then I went for the schematics, to actually check if the realtek chip was connected to the H6 the same way on both boards. Which it seems to be for…

Hello, I'm trying to build a image using the amazing auto builder supplied by armbian. In the past I've build kernels and modules for linux running at CycloneV-Devices. I don't need graphic support. If I use the image for a M2 Plus there is a initialization issue at mmc: MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Card did not respond to voltage select! mmc_init: -95, time 22 So I'm stuck. Is there a way to get it running by using the auto builder? Using the stock image provided by the manufacturer works. Regards, Sombohan

Hi, in the NetworkManager the Enable Mobile Broadband doesn't show up? lsusb shows the Huawei USB Stick as modem not as storage so this seems ok? what else can I check? I already tried 3 different sticks :-/ regards Meex

I am a newbie in Orange pi or similar Boards. I have only some experience with arduino and similar. On my Windows 7 pc are all my music stored. I want to stream the played music to my local wlan. And receive/play the stream with a OPi. What do i need to stream the played music from Windows? What is the best choice of Orange pi for this? Do i need only one OPi or two (one for send and one to receive)? Thank you for help.

Hi, I am searching to make a service running automatically at boot. I edited the .bash_profile and I added the command line service. In the OrangePi Pc2 and in the NanoPi Fire3 SOCs the procedure is perfectly working. In Orange Pi Zero Plus2 (with Armbian) this procedure doesn't work. Could you please help me to let start a procedure at boot? Thanks.

Hi! I'm having trouble with one (only one) of the alsamixer settings. 'MIC1 boost AMP gain control' shoots up to 71 every time I launch a program that uses sound, such as alsaloop or arecord. I've done 'sudo alsactl store', so I can get it back to zero by doing 'sudo alsactl restore'. Obviously that's not something I want to do all the time. I don't have any problems with any other settings. The setting in question completely ruins sound quality for my purposes, so I need it to stay at zero. I'm currently running 5.35 user-built Ubuntu 16.04.3 LTS 3.4.113-sun8i. I've tried Debian Jessie as well.

Hi, I updated from legacy kernel to mainline and then from jessie to stretch. Armbianmonitor -u output is further below. So far, the main issue is that after rebooting the DNS server is set to 127.0.0.1 thus loosing internet connectivity. Here is the output of resolve.conf (with manual setting the nameserver after reboot ) and the static network config. I am struggling to find how the dns server is set after reboot. I would appreciate if anyone could point me to a HOW TO. Minor issues: I can see only one cpu with htop, the ip address is not recognized at the ssh login screen, the opi pc is recognized as opi lite at the ssh login screen …

Trying to clear boot sequence from errors while building mainline version with following parameters: I found error sunxi-nmi: unable to map resource. After investigation, I found: 1) there is no nmi controller on A64, according to last version of Allwinner A64 manual; 2) nmi is added into DT by patch add-A64-nmi_intc. patch. I created a user patch reversing this patch, but it could be better if this patch is removed from A64 as it is usefull only on other chip. Question: is my opinion on this topic ok? Who is in charge to solve this conflict between me and the guy who added this patch? Mike

Time_2018/02/26 OrangePI PC2 Armbian_5.40_Orangepipc2_Ubuntu_xenial_next_4.14.15_desktop s problem OrangePI PC2 Armbian_5.40_Orangepipc2_Ubuntu_xenial_next_4.14.15_desktop was downloaded yesterday. It was started and seen once again. Fortunately, language support, they seem to move, it was. 1. fumio@orangepipc2: ~/Desktop$ df -h filesystem size user Avail Use% Mounted on ............... tempfs-root 498M 498M 0 100% /media/root-ro overlayroot 498M 498M 0 100% / ...... ..... tempfs-roo and overlayroot…

Can you please help me to find the used Linux Version? This is the boot output via Serial. I need the Linux Version which is used. U-Boot SPL 2017.05-g64c4ffa (Oct 20 2017 - 15:30:13) DRAM: 256 MiB Trying to boot from MMC1 U-Boot 2017.05-g64c4ffa (Oct 20 2017 - 15:30:13 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero DRAM: 256 MiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 Hit any key to stop autoboot: 0 gpio: pin PA17 (gpio 17) value is 1 35424 bytes read in 128 ms (269.5 KiB/s) 4777536 bytes read in 745 ms (6.1 MiB/s) Starting k…

Can someone tell me how to open terminal from keyboard Im using 5.20 legacy. It is giving an invalid format. So i need to virtually press h3disp

ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi on Cubietruck If my Wlan-Router is shortly offline and online again, the internal interface wlan0 doesn't reconnect. before: 4: wlan0 Link File: n/a Network File: /etc/systemd/network/40-static-wlan0.network Type: wlan State: routable (configuring) Path: platform-1c12000.mmc Driver: brcmfmac HW Address: 6c:fa:a7:xx:xx:xx (AMPAK Technology, Inc.) Address: 192.168.1.4 DNS: 192.168.1.1 after: ● 4: wlan0 Link File: n/a Network File: /etc/systemd/network/40-stat…

Problem of top priority of Armbian_5.40_Orangepipc2_Ubuntu_xenial_next_4.14.15_desktop edition After it sticks to OrangePI PC2 Languege support. I have a favor to ask. All languages by which Languege support is besides English at present. The situation that it can't be used in the following error. org.freedesktop.PolicyKit.Error.Failed: ('system-bus-name', {'name': ':1.85'}): org.debian.apt.install-or-remove-packages In Languege support, Japanese, they seem able to establish it, when it is, the back, Mozc, install. It'll be in order to use it mostly. By this, most users. OrangePI PC2, mostly, they seem able to use…

Hi, I recently bought an Odroid HC1 and installed Debian 8 on it. I am being quite happy so far with the installation, however this softy installer is very frustrating. I tried to install Syncthing, which failed to start, then now Webmin, hoping to be of "smaller scale", but no lack. It repeatedly fails to do something, displaying the errors behind the curses window, so I had to stop it with Ctrl-C. Then I got back to the menu and after quit, a cleared screen. Brilliant. Are there logs stored somewhere, at least? I checked /var/log/, but got no further. Or how I am supposed to go through failing installations? Thank you,

Hello, I have a 7 in lcd touchscreen that I would like to use with my 'le potato' board. I have begun using Armbian Le Potato Debian Stretch. I would like to get this working and would explore many options but when it breaks down i have: utilized putty to ssh into my 'le potato' with ethernet on my main router and typed in fbset to reveal... putty ssh screenshot I was curious about other possible options in Armbian like utilizing a config file or converting a .bin file to fex and changing the values. However, I have had no luck in utilizing an hdmi touchscreen besides maintaining usb power and flickering. Would anyone have a method of touchs…

Hello, I am running an orange pi one plus (H6 all winner). I tried to change partition size as suggested, although nothing working, here is what I tried: fdisk and the commands, with and without deleting old partition then adding partitions, I get an error message at the end when input w, people say to ignore it, although orange pi cannot boot afterwords I tried the instructions on their wiki, nothing works I tried cfdisk which seems to be working, although still when I df -h I cannot see the partition, and when I try to install something for some unknown reason my dpkg gets broken, and says that my mmcblk0p2 is …

i would like to reboot my cubi every day at 3 o clock, my linux experience is not so good. can same one explain me how i can do it with cron, because i have no clue with the cron.d/crone.daily etc.

hey I am new to Orange pi and i don't know a lot about it could you tell me how can I record audio using the on board Mic input in orange pi zero

I have installed latest armbian desktop version. When I try to preview webglsamples.org, it seam that no hardware acceleration is enabled, webgl. Is there possibilty to install webgl support ? I search forum, and did't find nothing about webgl support for A20. No mather wich browser, just need webgl support to show webgl . Thank you!

Hi. I have multiple USB wifi sticks and I would like to be able to connect to my wifi network without having to enter the device mac etc. using nmtui. Is it possible to use wlan0 as the device? Thanks. J.

# echo plop | logger should show things in tail -F /var/log/syslog After digging a bit: # df -h Filesystem Size Used Avail Use% Mounted on udev 85M 0 85M 0% /dev tmpfs 24M 3.0M 22M 13% /run /dev/mmcblk0p1 15G 1.3G 13G 9% / tmpfs 120M 4.0K 120M 1% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 120M 0 120M 0% /sys/fs/cgroup tmpfs 120M 0 120M 0% /tmp log2ram 50M 50M 0 100% /var/log tmpfs 24M 0 24M 0% /run/user/0 # du -lsh /var/log/* | grep M 24M /var/log/kern.log.1 25M …