SBC News

Description Hinlink H88K is a rk3588 board with a lot of IO: https://doc.hinlink.cn/ I've been building personal images: https://github.com/amazingfate/armbian-h88k-images/ I just use the same uboot defconfig with evb uboot devicetree. I may patch the evb device tree in the future since uboot patch is board specific. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream …

Maxtang ALN-10 is an upcoming mini-ITX motherboard based on Alder Lake-N processors from the Processor N50 up to the Core i3-N305 SoC and specifically targetting industrial applications with a -20 to +60°C temperature range, six RS232/RS485 serial ports, and 12V to 19V DC input among other features. Since the latest Alder Lake N-Series processors were announced, we’ve seen a range of mini PCs based on the new series, some laptops, as well as a camera devkit and one single board computer, but so far no actual motherboards. Maxtang ALN-10 changes that with the industrial mini-ITX motherboard soon expected to launch for B2B customers. Maxtang ALN-10 specifications: Alder Lak…

Description For bootable/workable kernel, dtb is necessary. How Has This Been Tested? [X] Build [X] Run apt show linux-image-current-meson to check whether dtb is a dependency. [X] Run apt purge --autoremove linux-image-current-meson to check if dtb will be removed automatically. Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

We’ve already covered inexpensive offline voice recognition modules based on US516P6 or TW-ASR ONE microcontrollers that allow people to add smarts to their projects without a network connection for improved privacy and lower latency. Those are great in theory, but at the time (April 2022) documentation was lacking or only in Chinese, and they were fairly hard to use based on some of the comments in my earlier posts. But today, I’ve noticed DFRobot is now selling the “Gravity: Offline Voice Recognition Sensor – I2C & UART” module with support for Arduino programming, and it looks fairly easy to customize as we’ll see further below. Gravity Voice Recognition DF2301QG m…

We first spotted the AMD Ryzen Embedded 5000 processors in a micro-ATX motherboard last August, but AMD has now only announced the availability the of Ryzen Embedded 5000 Series “Zen 3” processors designed for “always on” networking firewalls, network-attached storage systems, and other security applications. AMD also mentions the Ryzen Embedded 5000 are “power-efficient processors”, but that does not mean low power, as those embedded processors are 65 to 105W parts, and offer a step-up in performance from the 10 to 54W AMD Ryzen Embedded V3000 processors also targetting networking and storage applications. As we found out last year, four SKUs are available with the Ryze…

Description Update odroidxu4-current kernel to 5.4.241 How Has This Been Tested? [x] Reboot of my Odroid HC1 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description I change both edge and current. vdd-log supply is pwm-supply, not vin-supply. Fixes vdd-log supply ending up the dummy regulator. [ 1.783479] pwm-regulator vdd-log: Looking up pwm-supply from device tree [ 1.783505] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed [ 1.783556] vdd_log: supplied by regulator-dummy Per https://lore.kernel.org/all/20211227234529.1970281-2-heiko@sntech.de/ there will be no functional change as the supplying regulator is an always-on fixed-regulator. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test co…

Description Just maintenance. View the full article

WisdPi ArduPico is an Arduino UNO-shaped baseboard designed for the Raspberry Pi Pico and compatible boards that enables makers to reuse most Arduino shields available on the market and also adds for few I/Os and features. ArduPico specifications: Compatible board – Raspberry Pi Pico, Pico H, Pico W, Pico WH, and other Pi Pico compatible board solderable using through holes or castellated holes Expansion Arduino UNO header compatible with a wide range of shields 5-pin and 6-pin headers for additional GPIOs and 3.3V, GND All Raspberry Pi Pico GPIOs are exposed Debugging – SWD header Misc – Pico RESET key, WS2812 RGB LED Power Supply – 7 to 15V DC via DC jack Dimensions – 6…

Spring is in bloom in the northern hemisphere, and with it comes three tech events we'll be attending - PyCon US, Shell & Display Next Hackfest, and Linaro Connect! View the full article

The 100ASK-V853-Pro board is a development kit consisting of an Allwinner V853 system-on-module board (SoM) and a feature-rich carrier board with a large number of interfaces. Allwinner V853 supports up to 1TOPS of NPU computing power and is mainly for AI vision application development. The core board contains a DDR and eMMC as well as a PMU chip (AXP2101) and is connected to the carrier board through a board-to-board connector. All the functional resources of the V853 are drawn out through the carrier board. The carrier board comes with 2-channels CSI camera interfaces as well as RGB and MIPI DSI display interfaces. Although 1 TOPS of AI computing power is not outstandin…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…

Description There are several small problems / corner cases that needs to be addressed. Any help is appriciated. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full ar…

Description When we try to install a new kernel. All files under /boot will be removed. This PR will keep them until the special version kernel was removed. How Has This Been Tested? Need to be tested on other devices. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Dear Armbian Community, We have some exciting updates to share with you! Firstly, we are thrilled to announce that we have successfully raised 5000 EUR for upgrading our CI servers. We would like to express our sincere gratitude to all of you who participated in this fundraiser and for your continued support. Despite this success, our project still remains underfinanced, and we rely on your support to keep Armbian going. We also have some technical updates to share. FriendlyElec has sent us a sample of the NanoPi R6C, another RK3588S board that’s worth checking out. It comes with an M.2 slot and one less NIC compared to the R6S variant, and Armbian is available for bot…

AAEON BOXER-8224AI is a thin and lightweight AI edge embedded system solution based on NVIDIA Jetson Nano system-on-module and designed for drones, or other space-constrained applications such as robotics. AAEON BOXER products are usually Embedded Box PCs with an enclosure, but the BOXER-8224AI is quite different as it’s a compact and 22mm thin board with MIPI CSI interfaces designed to add computer vision capability to unmanned areal vehicles (UAV), as well as several wafers for dual GbE, USB, and other I/Os. BOXER-8224AI specifications: AI Accelerator – NVIDIA Jetson Nano CPU – Arm Cortex-A57 quad-core processor System Memory – 4GB LPDDR4 Storage Device – 16GB eMMC 5.1 …

Description After today's complete stall of primary Ubuntu infrastructure I switched to mirrors in order to rebuild caches. First problem is that often mirrors for amd64 and others are placed on different locations. This part is covered but it fails for riscv64 architecture. In order to cover that too, its better to have more generic variable CUSTOM_UBUNTU_MIRROR_PORTS and have everything that is not amd64 there. By quick research - if mirror hosts arm64 it also hosts risv64 and vice versa. Second problem - if caches are re-generated with 3rd party mirrors, release lists remain with those values. How to approach to that problem? We want that - at least our builds - are a…

EVerest is a software project initiated by PIONIX GmbH, but now part of the Linux Foundation’s LFEnergy initiative, whose primary goal is to develop and maintain an open-source software stack for EV charging infrastructure. EVerest supports multiple standards and it will run on any device from AC home chargers to public DC charging stations. I noticed the EVerest project in an upcoming talk at the Embedded Open Source Summit 2023 entitled ” EVerest: Electric Vehicle Chargers With Open Hardware and Software” and whose abstract reads in part: You will learn how to build your own electric vehicle charger using open hardware designs in combination with the EVerest open-source…

Description https://github.com/armbian/build/pull/4917#issuecomment-1513450111 @prahal Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description ghproxy url is something like https://ghproxy.com/https://gtihub.com/armbian/build, which contains https://gtihub.com. Without this patch git will fetch from https://ghproxy.com/https://ghproxy.com/https://gtihub.com/armbian/build. Just skip modifying the url when ghproxy is set. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build with GITHUB_MIRROR=ghproxy. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas…

Texas Instruments has unveiled the SimpleLink CC33xx family of Wi-Fi 6 companion IC with optional Bluetooth 5.3 Low Energy designed to be connected to a microcontroller (MCU) or a microprocessor (MPU) for secure and power-efficient IoT devices, The SimpleLink CC3000 supports 2.4 GHz WiFi 6, and interfaces over SDIO, SPI, and/or UART to the host system, while the SimpleLink CC3301 also adds support for Bluetooth 5.3 LE. Both chips can operate in high-temperature environments up to 105ºC. Texas Instruments CC3300/CC3301 specifications: Wireless 2.4 GHz WiFi 6 (802.11ax) up to 50 Mbps; Support for TWT and OFDMA, multirole (Access Point and Station) CC3301 only – Bluetooth 5.…

Disable config_ion for better compatibility with modern android containers like redroid Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas…

rootfs/image: avoid apt junk leftover by debootstrap; always cleanup apt cache on target Thanks to @amazingfate for raising this in https://github.com/armbian/build/pull/5063 - this will save us some 2Tb of storage, not to mention a lot of bandwidth. rootfs: rootfs-create: show a summary of the 20 biggest dirs, right before tarring the rootfs (for debugging) rootfs: rootfs-create: show usage of caches between first and second stages rootfs: rootfs-create: cleanup junk left by debootstrap after second stage rootfs: rootfs-create: always clean apt stuff at the end rename apt_purge_unneeded_packages() to apt_purge_unneeded_packages_and_clean_apt_caches() for clarity imag…

Want to develop your Meson project in a modern IDE? Make sure to install Meson VSCode extension which is now fully functional with the recent release of Meson 1.1.0! View the full article

BLIKVM is an open-source KVM over IP software that helps you manage servers or workstations remotely regardless of the health of the target system, and currently working with Raspberry Pi CM4 hardware, a Raspberry Pi HAT, or a PCIe board, and a new model based on MangoPi’s Allwinner H616 CPU module is coming soon. We’ve previously written about the Raspberry Pi-based PiKVM DIY project, followed by the PiKVM v3 Raspberry Pi HAT from the same project, and now I can see there’s a CM4-based PiKVM V4 that was on Kickstarter last month and raised over $800,000… You’d think this kind of system would be rather a niche market, but there’s even demand to have a similar open-source …

PicoMQTT is a lightweight MQTT library for Arduino/PlatformIO optimized for ESP8266 and ESP32. It not only supports the MQTT Client mode like most existing solutions but also the MQTT Broker mode which transforms an ESP8266 or ESP32 board into an MQTT gateway replacing a Raspberry Pi board or an IoT gateway typically used for this task. The library follows MQTT 3.1.1 specification, supports the publishing and consuming of arbitrary-sized messages, can deliver thousands of messages per second, and supports easy integration with the ArduinoJson library to publish and consume JSON messages. MQTT Broker code example: [crayon-643e4a00948d8570550725/] There are some limitations…

ADLINK Ampere Altra Dev Kit is an “IoT prototyping kit” based on an ATX motherboard fitted with a COM-HPC-ALT Server Type Size E module powered by an Ampere Altra 32, 64, or 80-core Arm Neoverse N1 server processor, and supporting up to 768GB DDR4 memory. It’s basically the same hardware as found in the Ampere Altra Developer Platform (AADP), but without the tower and power supply, nor optional features like liquid cooling or 10GbE interfaces. Ampere Altra Dev Kit (AADK) specifications and content: Computer-on-Module – COM-HPC Server Type Size E Ampere Altra module with Ampere Altra 32 to 80-core 64-bit Arm Neoverse N1 processor up to 1.7/2.2/2.6 GHz (32/64/80 cores, TPD:…

Description Whenever something is changed in the config/boards/ folder execute rebuild of board build list GitHub action. This simplify board images re-build process as one can only select image from the list. Version is bumped automatic, build list variant is predefined. Jira reference number AR-1664 How Has This Been Tested? [x] Manual execute from another repository Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any depen…

Description https://forum.armbian.com/topic/27917-wireguard-module-in-default-kernel-configuration/#comment-163826 tl;dr: Add wireguard to sunxi-current Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build kernel Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes ha…

small batch of lib fixes (mid+/April'23) Fixing the last batch. Some stupid mistakes. revert: run kernel make through pipetty for moar colors (breaks make menuconfig) - thanks @EvilOlaf artifacts: add git SHA1 sanity checking memoize-cached: add flock locking to run_memoized() to avoid error when run in parallel lib: shellfmt & fix gen-library to match artifact: rootfs: fix artifact_rootfs_config_dump() with added rootfs pkgs (should work now, I promise) View the full article

Description pixz was invented when xz did not support multi-threading natively. Now it is pretty much obsolete. Jira reference number [AR-9999] How Has This Been Tested? Hasn't. Feel free to do testings. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Lilygo has launched yet another ESP32-S3 board with an integrated display, but the T-HMI has a larger 2.8-inch color display and a resistive touch panel suitable for HMI (Human Machine Interfaces). It is also equipped with three Grove connectors for expansion with sensors or actuators. Like all the recent ESP32-S3 boards from Lilygo, the T-HMI features the ESP32-S3NR8 WiFi 4 and Bluetooth MCU with 8MB PSRAM, as well as a 16MB SPI flash, a microSD card slot, a few buttons, and power from USB or a LiPo battery. Lilygo T-HMI board specifications: Wireless MCU – Espressif Systems ESP32-S3R8 dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acceleration, …

Description Add dockerproxy to accelerate ghcr.io. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build with command ./compile.sh kernel COMPRESS_OUTPUTIMAGE=sha,gpg,xz DEB_COMPRESS=xz DOWNLOAD_MIRROR=china BOARD=rock-5b BRANCH=legacy GITHUB_MIRROR=ghproxy GHCR_MIRROR=dockerproxy DOCKER_ARMBIAN_BASE_COORDINATE_PREFIX="ghcr.dockerproxy.com/armbian/docker-armbian-build:armbian-" Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand…

Description Apt cache is only useful in build time. Users usually don't need cache for installed packages. Removing them will save space and make images smaller. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build with command ./compile.sh COMPRESS_OUTPUTIMAGE=sha,gpg,xz DEB_COMPRESS=xz DOWNLOAD_MIRROR=china BOARD=rock-5b BRANCH=legacy GITHUB_MIRROR=ghproxy RELEASE=jammy BUILD_MINIMAL=no BUILD_DESKTOP=yes KERNEL_CONFIGURE=no DESKTOP_ENVIRONMENT=gnome DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base DESKTOP_APPGROUPS_SELECTED="3dsupport browsers chat desktop_tool…

Raspberry Pi recently received a strategic investment from Sony (Semiconductor Solutions Corporation) in order to provide a development platform for the company’s edge AI devices leveraging the AITRIOS platform. We don’t have many details about the upcoming Raspberry Pi / Sony device, so instead, I decided to look into the AITRIOS platform, and currently, there’s a single hardware platform, LUCID Vision Labs SENSAiZ SZP123S-001 smart camera based on Sony IMX500 intelligent vision sensor, designed to work with Sony AITRIOS software. LUCID SENSAiZ Smart camera SENSAiZ SZP123S-001 specifications: Imaging sensor – 12.33MP Sony IMX500 progressive scan CMOS sensor with rolling…

Description ghproxy is a github mirror making use of cloudflare cdn, which is ultra fast in China. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build kernel with ./compile.sh kernel COMPRESS_OUTPUTIMAGE=sha,gpg,xz DEB_COMPRESS=xz DOWNLOAD_MIRROR=china BOARD=rock-5b BRANCH=legacy GITHUB_MIRROR=ghproxy Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My cha…

Description In commit 0aa61abe7 (armbian-audio-config: Massively speed up script) this script was changed to not call amixer for each control, but just once for each card, feeding commands for many controls in one invocation with the --stdin option. In that commit, two errors were introduced: Controls that were intended to be muted were turned on instead. This affects the "CD", "Mic" and "Internal Speaker" controls. This occured because there is a helper shell function whose arguments were renumbered, but the last argument kept the old numbering, keeping it always at the default value of "on", even when it should have been "mute". Controls with a space in their na…

Indiedroid Nova is another Rockchip RK3588S SBC with Raspberry Pi 4 form factor, up to 16GB RAM, with a heatsink that serves as a protective cover, fitted with a fan (if needed), and an optional swappable flash module up to 64GB capacity. The Nova board has basically the same port layout as the Raspberry Pi 4, except for one of the micro HDMI ports being replaced by a USB Type-C port with support for DisplayPort, so you’ll still get a Gigabit Ethernet port, WiFi 5 & Bluetooth 5.0 connectivity, two USB 3.0 ports, two USB 2.0 ports, MIPI CSI and DSI connectors, etc… Indiedroid Nova specifications: SoC – Rockchip RK3588S CPU – Octa-core processor with 4x Cortex-A76 core…

Description Add support for NanoPi R6S and R6C devices. Both devices are almostly same so we can have one image for them. Kernel PR: https://github.com/armbian/linux-rockchip/pull/15 Jira reference number AR-1663 How Has This Been Tested? [x] USB ports [x] eMMC boot [x] Ethernet ports [ ] Xorg works Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View …

kernel: fix for 6.3+ linux-headers pkg due to upstream dir change extra: run kernel make through pipetty for moar colors Small detour: in v6.3-rc1, in commit https://github.com/torvalds/linux/commit/799fb82aa132fa3a3886b7872997a5a84e820062, the tools/vm dir was renamed to tools/mm. Unfortunately tools/Makefile still expects it to exist, and make clean in the tools dir fails. Drop in a fake Makefile there to work around this. Should fix #4991 View the full article

In this article, we will show you how to set up a WireGuard server on Ubuntu in order to use it for remote login. Introduction to WireGuard First of all, let’s first understand, what is WireGuard? WireGuard is a very simple and fast VPN tool with state-of-the-art encryption. Its goal is to be faster, simpler, more streamlined, and easy to use than IPsec, while avoiding the hassle of large-scale configuration. WireGuard is designed as a general-purpose VPN to run on embedded interfaces and supercomputers in many different environments. Originally released for the Linux kernel, WireGuard is now widely deployed and supported across platforms (Windows, macOS, BSD, iOS, Androi…

extensions: rkdevflash: simplify usage of rkdeveloptool (on Linux) only works bare Linux, not Docker. to flash Rockchip images to eMMC either during image build or separately with flash CLI command included in https://github.com/armbian/build/pull/5055 Usage: ./compile BOARD=xxx [...] EXT=rkdevflash Will build rkdeveloptool for you, and after image is built, enters a loop waiting for device. Then either uploads rkbin loader if in Maskrom mode, or straight flashes the image if in Loader mode. Finally it reboots the device after flashing. Working with rk3588's loader with changes included in https://github.com/armbian/build/pull/5056 View the full article

extensions: add v4l2loopback-dkms, very similar to the zfs extension Raison d'être: prove linux-headers work, at least, minimally View the full article

Add WiP Mekotronics R58 boards (rockchip-rk3588) mekotronics.com rockchip-rk3588: add new board mekotronics-r58-minipc.wip (Mekotronics R58 MiniPC, and variants) rockchip-rk3588: add new board mekotronics-r58x.wip (Mekotronics R58X) rockchip-rk3588: add new board mekotronics-r58x-4g.wip (Mekotronics R58X-4G); add u-boot patches rockchip-rk3588: set ROCKUSB_BLOB for RockUSB Maskrom -> Loader mode u-boot: same as Radxa Rock-5A. RockUSB and UMS works; boot from eMMC only. No USB, no NVMe. Can stop u-boot by holding Shift-M during boot on serial console. Kernel: was handled at https://github.com/armbian/linux-rockchip/pull/12 and https://github.com/armbian/linux-rockch…

rpardini's bunch of lib changes - mid-April'23 Themes: actually working JSON dumps, both for images and artifacts; also fast, via CONFIG_DEFS_ONLY actually working rootfs artifacts / remote OCI .debs per-release moar power to extensions, standardize some mechanisms fixes cli: flash: introduce flash CLI command; introduce hook post_build_image_write config: refactor calculate_image_version() out of create_image_from_sdcard_rootfs(), make more flexible, predict IMAGE_FILE_ID during config default IMAGE_INSTALLED_KERNEL_VERSION="generic" instead of "linux" artifact: rootfs: fix artifact_rootfs_config_dump() to include all inputs to aggregation logging: better loggin…

We’ve received a sample of the Pico:ed V2 board developed by ELECFREAKS and will show how to use it as a replacement for the BBC micro:bit in a project using CircuitPython. We’ve already covered the board in detail with specifications, block diagram, and pinout diagram before, and it’s basically a Raspberry Pi Pico RP2040 board with BBC Micro:bit form factor including a 17×7 Dot Matrix LED display, some buttons, a buzzer, but no wireless connectivity, relying only on USB instead. CircuitPython firmware installation on the Pico:ed V2 board The board supports C/C++, MicroPython, and CircuitPython programming languages, and for this review, we’ve decided to download the Circ…

The Linux Foundation has just announced the full schedule for the Embedded Open Source Summit, which will take place on June 27-30, 2023 in Prague, Czech Republic, as well as virtually starting on June 26. Over 175 sessions, birds of a feather (BoF) tracks, and workshops related to embedded and open-source innovation will be presented at the event itself comprised of six micro conferences: Automotive Linux Summit Europe, Embedded IoT Summit, Embedded Linux Conference, LF Energy Embedded Summit, Safety-Critical Software Summit, and Zephyr Project Developer Summit. Even though I’m not going to attend personally, I’ve gone through the schedule to create my own little virtual…

Description Espressobin had some package removal optimisations which are anyway deprecated with minimal images. How Has This Been Tested? Bug was found in build-all images scenario ... while switching to Bookworm target instead of Sid. View the full article

The Challenger RP2040 UWB board features a Raspberry Pi RP2040 microcontroller combined with a DWM300 UWB (Ultra-Wide Band) module in the Adafruit Feather form factor and is designed for indoor positioning and ranging applications with an up to 10-centimeter accuracy, and data transfers up to 10 Mbps. The first Challenger RP2040 board was introduced in 2021 with an ESP8285 WiFi chip, iLabs (Invector Labs) shortly followed up with the Challenger RP2040 LoRa with an RFM95W LoRa module, and they also made models with NFC and cellular connectivity. The Swedish company has now just introduced their latest Challenger board with the Challenger RP2040 UWB leveraging UWB technolog…

Based on its name, the DongshanPI-PicoW board/module aims to be an Arm Linux alternative to the Raspberry Pi Pico W with a SigmaStar SSD210 dual-core Cortex-A7 processor with 64MB RAM, an SSW101B USB WiFi 4 chip, plus a good amount of I/Os thanks to four 12-pin headers. The module also comes with a 128MB SPI flash to run Linux, takes 5V power input, and offers a display interface up to 1280×800, USB 2.0, audio interfaces, and more in a small 31×31 mm form factor with 48 through and castellated holes that should be easy to integrate into compact devices. DongshanPI-PicoW specifications: SoC – SigmaStar SSD210 dual-core Arm Cortex-A7 at up to 1.0GHz with FPU, NEON, MMU, DMA…

Dear Armbian Community, We are excited to share some updates on the progress of our project with you. Our crowdfunding campaign is just 3 days away from completion, and we have already started negotiating with one of our hardware suppliers for possible partnership. Join now if you haven’t yet! We have added build configs for Mekotronics R58 and expanded our community supported targets to include Risc-V Vision Five 2 boards, Star64, MangoPi, and Beagle V. Additionally, we have made 50+ bug fixes across all segments this week. We have also made some improvements to our download images wizard with several new features: We have added a data range filter to the board sel…

Nordic Semi nRF54H20 is a 320 MHz multiprotocol wireless SoC with several Arm Cortex-M33 and RISC-V cores, support for Bluetooth 5.4 and greater with features like LE Audio and Bluetooth mesh, as well as Thread, Matter, and so on. It is the first part of the fourth generation nRF54 family manufactured with a 22nm process, and its application processor doubles the processing power (2x CoreMark) of the Arm Cortex-M33 application core in the nRF5340 SoC and embeds up to 2MB flash, 1MB SRAM. nRF54H20 preliminary specifications and highlights: CPU Application core – Arm Cortex-M33 @ up to 320 MHz with 2 MB Flash + 1MB SRAM Network core – Arm Cortex-M33 Several RISC-V cores (…

There are plenty of ESP32 series boards with display usually TFT or E-Ink, but I don’t think I’ve ever seen one with an AMOLED display and that’s what Lilygo is offering with the “T-Display-S3 AMOLED” board equipped with an ESP32-S3 WiFi and Bluetooth microcontroller and a 1.9-inch AMOLED display. The new board is almost the same as the T-Display-S3 board introduced last year, except for a display with higher resolution, more vibrant colors, and a wider viewing angle, plus a 3D antenna, and a few extra I/Os. T-Display-S3 AMOLED specifications: Wireless MCU – Espressif Systems ESP32-S3R8 dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acceleration, …

Description We are providing several 3rd party packages in our repository such as Mozilla Firefox or Chromium. In order to prevent installing snapd version from Ubuntu, we have to set higher priority for packages that are coming from our repository. Jira reference number AR-1662 How Has This Been Tested? desktop:preferences.d:% apt-cache policy | grep armbian 1001 http://beta.armbian.com jammy/jammy-desktop all Packages origin beta.armbian.com 1001 http://beta.armbian.com jammy/jammy-desktop amd64 Packages origin beta.armbian.com 1001 http://beta.armbian.com jammy/jammy-utils all Packages origin beta.armbian.com 1001 http://beta.armbian.com jammy/jammy-ut…

Cool Pi CM5 is a system-on-module based on Rockchip RK3588 or RK3588J (industrial temperature range) octa-core Arm Cortex-A76/A55 processor with up to 32GB RAM, 256GB eMMC flash, offered with a development board with dual GbE, two 8K HDMI 2.1 ports, a PCIe 3.0 x2 slot, M.2 NVMe and SATA storage, and more… At the end of last year, we wrote about the Cool Pi 4 as a much faster alternative to Raspberry Pi 4 SBC, and the company has now launched a Raspberry Pi Compute Module 4 and Radxa CM5 alternative with the Cool Pi CM5 MXM 3.0 system-on-module that they offer along with a feature-rich evaluation board (EVB). Cool Pi CM5 EVB specifications: System-on-Module SoC – Rockchip …

Description Enable mainline mipi-dsi driver for Rockchip. This permits the use of the RPi 7" LCD and equivalents (device tree overlay required) How Has This Been Tested? boot no error (module not loaded as not enabled in DT) Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Enable some net modules for meson. How Has This Been Tested? [X] Build and run Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

SB Components’ ESPi is a WiFi-enabled Ethernet board with a 1.14-inch information color display either coming with an ESP32-S3 WiFi and Bluetooth module or designed as a carrier board for the Raspberry Pi Pico W board. I have no idea who needs this, but the ESPi board looks cute and can be used as a 10/100Mbps Ethernet to WiFi (or BLE) gateway with a small TFT display, and there’s also a small joystick on the board to control a potential menu or user interface rendered in the display. ESPi board specifications: Module/Board (one or the other) ESP32-S3-WROOM-1 module with ESP32-S3 dual-core LX7 microprocessor @ up to 240 MHz with Vector extension for machine learning, up …

STMicro ST87M01 is a compact, low-power, programmable LTE Cat NB2 (NB-IoT) industrial cellular module with GNSS geo-location capability for “massive IoT” deployments and asset tracking applications. STMicro already had several LPWAN solutions such as the STM32WL LoRa SoC, a Wi-SUN transceiver, a few SigFox chips, and a bunch of proprietary sub-GHz chips, but no cellular IoT solutions of their own although the STM32 microcontroller can be found in many third-party solutions. The ST87M01 NB-IoT and GNSS module changes that, so let’s have a closer look. ST87M01 NB-IoT module specifications: Cellular LTE, Category NB2, Release 15 Worldwide regional bands coverage Single-tone …

Powered by the Rockchip RK3588 processor, Firefly Station P3D modular AI mini PC comes with two swappable layers, namely the top one with the main board and default ports such as two HDMI output ports, one HDMI input, Gigabit Ethernet, two USB 3.1 ports, etc…, and the bottom layer that can be configured with various ports depending on your specific application. The top layer is basically the new Station P3 mini PC with RK3588 octa-core Cortex-A76/A55 processor, up to 32B RAM, 256GB eMMC flash, an M.2 2280 NVMe SSD socket, and dual-band WiFi 6 & Bluetooth 5.0 plus all the ports mentioned above. Fire Station P3D specifications: SoC – Rockchip RK3588 octa-core processor …

Description OrangePi kernel patched to enable TV Output on OrangePi Zero (LTE). Changes made according: https://github.com/robertojguerra/orangepi-zero-full-setup/blob/main/README2.md 7.3 Add the TV encoder driver to the Linux kernel source sunxi-6.1/0036-wip-h3-h5-cvbs-armbian.patch : makes additions to the "dts", which tells the kernel where are the new devices. Adds kernel code to interact with the tv encoder. With my modifications, now it is applicable to Armbian (this patch came from the LibreElec github). sunxi-6.1/zzzz2-tv.patch : by Armbian user "gleam2003", adds directives to make sure that the dtbo (device tree binary overlay) is compiled sunxi-6.1/zzzz3-tv.pat…

Adafruit has designed a new variant of the Feather RP2040 board with the “Adafruit Feather RP2040 with RFM95 LoRa Radio” featuring a 900 MHz RFM95 “RadioFruit” module and following the “Adafruit Feather RP2040 with DVI Output Port” that we covered last week. The board ships with 8 MB of QSPI flash, supports USB-C or LiPo battery power, is offered in the familiar Feather form factor, and the built-in RFM95 module supports 433 MHz, 868MHz, and 915MHz frequencies, selectable by firmware, for global coverage. Adafruit Feather RP2040 with RFM95 LoRa Radio specifications: MCU – Raspberry Pi RP2040 dual-core Arm Cortex M0+ microcontroller @ 133 MHz with 264 KB RAM Storage – 8MB …

EDATEC ED-AIC2020 is an IP67-rated, Raspberry Pi CM4-based industrial AI camera equipped with a fixed or liquid lens and LED illumination that leverages the Raspberry Pi Compute Module 4 to run computer vision applications using OpenCV, Pythong, And Qt. We’ve previously written about Raspberry Pi Compute Module-based smart cameras such as the Q-Wave Systems EagleEye camera (CM3+) working with OpenCV and LabVIEW NI Vision and the StereoPi v2 (CM4) with stereo vision. But the EDATEC ED-AIC2000 is the first ready-to-deploy Raspberry Pi CM4 AI camera we’ve covered so far. EDATEC “CM4 AI camera” (ED-AIC2020) specifications: SoM – Raspberry Pi Compute Module 4 up to 8GB RAM, u…

Wokwi is an online simulator for Arduino, Raspberry Pi Pico, and ESP32 boards, or even your own custom microcontroller board designed to learn programming without the actual hardware. My girlfriend’s daughter has just attended a free 5-day online course about AI, IoT, ESP32, MicroPython, and more organized by King Mongkut’s Institute of Technology Ladkrabang (KMITL) and IMAKE Innovation, a STEM education company in Thailand. I was told they had some homework for ESP32 as part of the course, so I asked her whether she wanted an ESP32 board. But she said no need. So then I asked how to program the ESP32 without the board, or do they have a simulator? And indeed I was sent t…

MangoPi MQ Quad is an Allwinner H616 quad-core Arm Cortex-A53 SBC following Raspberry Pi Zero W form factor, and the company’s earlier MangoPi MQ Pro RISC-V SBC featuring the Allwinner D1 processor. The MangoPi MQ Quad also comes with 1GB RAM, a mini HDMI output, two USB Type-C ports, WiFI 4 and Bluetooth connectivity, a microSD card, as well a 40-pin Raspberry Pi-compatible GPIO header and an FPC connector with USB, Ethernet, and more GPIOs for expansion. MangoPi MQ Quad specifications: SoC – Allwinner H616 quad-core Cortex-A53 @ 1.5GHz with Mali-G31 MP2 GPU with OpenGL 3.2, Vulkan 1.1, OpenCL 2.0 API support System Memory – 1GB DDR3L Storage – MicroSD card slot, a footp…

We’ve already checked out Cytron’s CM4 Maker Board kit with a Raspberry Pi CM4 system-on-module and booted the system with the included 32GB “MAKERDISK” Class 10 microSD card preloaded Raspberry Pi OS in the first part of the review. For the second part of the CM4 Maker review, I’ve mostly used the 128GB NVMe SSD provided by the company and played with other features of the board including the RTC, the buzzer, some Seeed Studio grove modules, and even got help from ChatGPT for one of the Python programs I used. Booting Cytron CM4 Maker Board with the “MAKERDISK” NVMe SSD I connected several Grove modules with GPIO and I2C interfaces, a Raspberry Pi Camera Module 3, an Eth…

legacy kernel custom uImage/etc via new pre_package_kernel_image hook; fixes for orangepizero2/sun50iw9/legacy kernel: introduce new hook pre_package_kernel_image; show vmlinuz file magic before/after hook; add -HK hook hash to kernel artifact version arch configs (all): default, but do not overwrite, KERNEL_IMAGE_TYPE/KERNEL_INSTALL_TYPE/etc: allow board/family to set first orangepizero2/sun50iw9/legacy: implement pre_package_kernel_image hook to convert vmlinuz to uImage manually; fix legacy u-boot build sourceaddr 0x40008000 was found in Xunlong's legacy kernel source squashed into a huge commit. Thanks, Xunlong! bring busybox dependency with inline hook for legacy u…

Antmicro has designed an open hardware AMD Xilinx Kintex-7 K410T FPGA development board in KiCad 6 mostly to synthesize custom RISC-V-based processing platforms and work on the OpenTitan Root of Trust project. Separately, the company has also launched an open hardware portal sharing some of the KiCad and Blender designs they’ve worked on over the years. Open-source hardware AMD Xilinx Kintex-7 K410T development board Key features and specifications: FPGA – AMD-Xilinx Kintex-7 K410T FPGA with 400K logic cells, 16 Gigabit transceivers operating at 12.5Gb/s. System Memory – 512MB of DDR3L memory, 8MB of SRAM memory Storage – 32MB (256Mbit) of (Q)SPI NOR flash, assembly opti…

Description Before: _ _ _____ _____ ___ ___ __ | | | | ____| ___|_ _| __ _( _ ) / /_ | | | | _| | |_ | | \ \/ / _ \| '_ \ | |_| | |___| _| | | > < (_) | (_) | \___/|_____|_| |___| /_/\_\___/ \___/ Welcome to Armbian 23.05.0-trunk--1-PC7446-V521e-H1f65-Be6c1 Jammy with Linux 5.15.106-x86 No end-user support: built from trunk After: _ _ _____ _____ ___ ___ __ | | | | ____| ___|_ _| __ _( _ ) / /_ | | | | _| | |_ | | \ \/ / _ \| '_ \ | |_| | |___| _| | | > < (_) | (_) | \___/|_____|_| |___| /_/\_\___/ \___/ Welc…

orangepizero2/sun50iw9/legacy: trying to fix legacy bootloader build; re-do from vendor code; bring busybox dependency with inline hook View the full article

Description Input method such as fcitx5 requires applications running under gtk or qt. We have another choice libreoffice-qt5, but I think preinstalled libreoffice-gtk3 should be okay. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

HIGOLE PC STICK is a mini PC that looks like a large flash drive, is smaller than a regular mini PC, and is easier to carry around. You can connect it directly to a monitor or TV with an HDMI input, and use it like any computer right away. In part 1 of the HIGOLE PC STICK review, we will go through the specifications, unbox the design, check its hardware design with a teardown, and go through the first boot. HIGOLE PC STICK specifications The HIGOLE PC STICK is powered by an Intel Celeron J4125 quad-core Gemini Lake Refresh processor with 8GB RAM, 128GB flash, and microSD card slot for storage expansion. The mini PC comes with a Gigabit Ethernet port, WiFi 6 and Bluetooth…

AMD Alveo MA35D media accelerator PCIe card is based on a 5nm ASIC capable of transcoding up to 32 Full HD (1080p60) AV1 streams in real-time and designed for low-latency, high-volume interactive streaming applications such as watch parties, live shopping, online auctions, and social streaming. AMD says the Alveo MA35D utilizes a purpose-built VPU to accelerate the entire video pipeline, and the ASIC can also handle up to 8x 4Kp60, or 4x 8Kp30 AV1 streams per card. H.264 and H.265 codecs are also supported, and the company claims its “next-generation AV1 transcoder engines” deliver up to a 52% reduction in bitrate at the same video quality against “an open source x264 ver…

Beelink EQ12 is a mini PC powered by an Intel Processor N100 “Alder Lake-N” quad-core processor offered with 8GB or 16GB DDR5 memory, a 512GB NVMe SSD for storage, as well as two 2.5GbE ports, and a WiFi 6 & Bluetooth 5.2 wireless module. The actively cooled computer also comes with two 4K capable HDMI ports, three USB 3.2 ports, and a 10Gbps USB Type-C that also supports DisplayPort Alternate Mode enabling the EQ12 to drive up to three 4K displays. Beelink EQ12 specifications: SoC – Intel Processor N100 Alder Lake-N quad-core processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24 EU Intel HD graphics @ up to 750 MHz; TDP: 6W System Memory – 8GB or 16GB DDR5 4800 MHz RA…

Description enabled kernel modules pine64 for CSI and camera drivers Jira reference number AR-1647 How Has This Been Tested? Yes by installation on the PINE64 hardware. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

fixes for general 32-bit bootloader compile on sunxi/sunxi64 and sun50iw9 legacy u-boot postprocess sun50iw9/legacy: armbian-next'ify, add logging, avoid changing global PATH, use host dtc utility, make write_uboot_platform() verbose sunxi-tools: bring in gcc-arm-linux-gnueabi hostdep required for building sunxi's boot stages (even on arm64 targets) View the full article

Description Add GH action to execute remote workflow on config changes Jira reference number AR-1656 How Has This Been Tested? [x] Tested in different repository Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

The PineTab-V is a RISC-V tablet, or rather a tablet development kit, based on StarFive JH7110 quad-core RISC-V SoC, and with the same design as the upcoming Arm-based PineTab2 tablet that’s scheduled to launch on April 11. Pine64 just launched the Star64 single board computer to help with software development on Linux-capable RISC-V hardware, and they took the opportunity to lay out a tablet board based on the same JH7110 to replace the Rockchip RK3566 board found in the PineTab2, so eventually, a working sample should look like that… PineTab-V preliminary specifications: SoC – StarFive JH7110 with CPU – Quad-core 64-bit RISC-V (SiFive U74 – RV64GC) processor @ up to 1.5…

Queclink Wireless Solutions WR300FG is a dual SIM 5G industrial router with five Gigabit Ethernet ports, WiFi 6, GNSS, RS232 and RS485 interfaces designed for factory automation, smart energy infrastructure, and Internet of Vehicles (IoV). TheWR300FG is based on a Qualcomm IPQ8072 quad-core Arm Cortex-A53 networking processor running OpenWrt, supports both 5G SA/NSA modes, backward-compatibility with 4G/3G, and its dual SIM features enabled automatic switchover for interrupted 5G connectivity. WR300FG specifications: SoC – Qualcomm IPQ8072 quad-core Arm Cortex-A53 @ 2.2 GHz part of Qualcomm Networking Pro 1200 Platform System Memory – TBD Storage – 1GB flash (described …

Description We don’t need to scare people with displaying odd hash version. Before: _ _ _____ _____ ___ ___ __ | | | | ____| ___|_ _| __ _( _ ) / /_ | | | | _| | |_ | | \ \/ / _ \| '_ \ | |_| | |___| _| | | > < (_) | (_) | \___/|_____|_| |___| /_/\_\___/ \___/ Welcome to Armbian 23.05.0-trunk--1-PC7446-V521e-H1f65-Be6c1 Jammy with Linux 5.15.106-x86 No end-user support: built from trunk After: _ _ _____ _____ ___ ___ __ | | | | ____| ___|_ _| __ _( _ ) / /_ | | | | _| | |_ | | \ \/ / _ \| '_ \ | |_| | |___| _| | | > < (_) | (_) | \___/|_____|_| |___|…

“Adafruit Feather RP2040 with DVI Output Port” is another Raspberry Pi RP2040 board with an HDMI port that can output DVI video signal (no audio) to most TVs or monitors with an HDMI input port thanks to the PicoDVI project. The board builds upon the company’s Adafruit Feather RP2040 with the HDMI port adding just a few dollars. Adafruit Feather RP2040 with DVI Output Port specifications: MCU – Raspberry Pi RP2040 dual-core Arm Cortex M0+ microcontroller ~125 MHz (but it should be overclocked for DVI output) with 264 KB RAM Storage – 8MB SPI flash Video Output – 1x HDMI port for DVI output up to 320×240 or 400×240 resolution with 16-bit pixels, I2C signals to read EDID da…

Description Maint. How Has This Been Tested? [x] Build test Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Changing support status - merge when the time is right. Jira reference number AR-1651 How Has This Been Tested? No need, status change. View the full article

Labeling errors are common in present open-source 3D perception datasets, which could have impactful consequences. To tackle this issue, we used Carlafox to generate an error-free synthetic dataset for 3D perception automatically. View the full article

Greetings Armbian Community! Our Discord community has surpassed the 1000 user mark, which is way beyond our expectations, and we are incredibly grateful for everyone who has participated and helped improve our community experience! We are excited to announce that our continuous integration system is slowly getting back into action. We have sorted out versioning and nailed down most critical bugs. Our beta.armbian.com repository is now back with kernel semi-automated updates. We are also working on build framework documentation, and before we put it to the final destination, docs.armbian.com, we would like to invite you to get involved in fast bootstrapping. We would a…

01Space has designed a tiny ESP32-C6 IoT board with WiFi 6 and Bluetooth LE 5.0 connectivity built around the ESP32-C6-WROOM-1 wireless module, and exposing I/Os through two 10-pin headers. Espressif launched their ESP32-C6 modules and development kits last January, and the 01Space is the first third-party ESP32-C6 board we’ve covered. It’s a minimal board with a wireless module, a USB Type-C port for power and programming, and Reset and Boot buttons. 01Space ESP32-C6 board specifications: Wireless module – ESP32-C6-WROOM-1-N4 module with Espressif Systems ESP32-C6 single core 32-bit RISC-V processor @ 160 MHz with 2.4 Ghz WiFi 6 1T1T, Bluetooth LE 5.0, and 802.15.4 radio…

Description Looks like a solution for this. Jira reference number AR-1650 How Has This Been Tested? [ ] Build an image, setup and RDP to it Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

We wrote about the new Z-Wave Long Range (LR) standard aka “Z-Wave Plus LR” promising four times the range and 10-year battery life in September 2020 but hadn’t heard much about it since then, at least until now, as Zooz has launched the ZST39 LR USB Stick and ZAC93 LR GPIO module based on a Z-Wave 800 Series chip, with the GPIO module compatible with Home Assistant Yellow and Raspberry Pi SBCs. Zooz 800 Series Z-Wave Long Range GPIO Module ZAC93 LR ZAC93 LR specifications: Z-Wave Frequency – 908.42 MHz (US, CA, MX) / 921.4 MHz (AU, NZ) / 868.42 MHz (EU) Wireless Range – Up to 1 mile/1.6 km in open space with Long Range enabled (up to 300 meters in open space, up to 76 m…

Renesas RZ/T2L is a cost-optimized single-core Arm Cortex-R52 microprocessor (MPU) with an EtherCAT controller based on the same architecture as the higher-end Renesas RZ/T2M dual-core Cortex-R52 processor introduced last year, but at about half the size. The new MPU enables high-speed and accurate real-time processing performance required for AC servo drives, inverters, industrial robots, collaborative robots, etc.. used in factory automation (FA), medical equipment, building automation (BA), and other sectors and applications where EtherCAT is being adopted. Renesas RZ/T2L key features and specifications: CPU – Arm Cortex-R52 clocked at up to 800MHz with 16KB L1 I/D cac…

Description Automatically load the macvlan driver without executing sudo modprobe macvlan every time. How Has This Been Tested? [x] Build kernel. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

M5Stack CM4Stack is a tiny Arm Linux mini PC based on Raspberry Pi CM4 that measures 59 x 44 x 46mm and integrates a 2-inch touchscreen display for information and control, as well as the usual ports you’d expect from a mini PC such as HDMI, USB 3.2 ports, Gigabit Ethernet, and so on. We’ve previously written about M5Stack Core and Atom controllers based on ESP32 microcontrollers, an optional 2.0-inch display, and a few GPIOs. The company has now decided to provide a similar solution with a jump in performance and interfaces with the CM4Stack development kit. CM4Stack specifications: SoM – Raspberry Pi CM4 (CM4104032) with SoC – Broadcom BCM2711 quad-core Cortex-A72 proce…

0xC0FFEE’s RP2040 PHAT is both a Raspberry Pi RP2040 development board and a pHAT for Raspberry Pi and Pi Zero Linux SBCs that exposes the I/Os through the 40-pin GPIO header traditionally found in Raspberry Pi single board computers. The board comes with all features of the Raspberry Pi Pico board including a USB port for power and programming, an SPI flash, and a BOOT button, but also adds a Reset button. That means it’s software compatible, except for the user LED connected to GPIO 26, and works with the MicroPython and C SDKs, as well as the Arduino IDE, Zephyr RTOS, and more. RP2040 pHAT specifications: MCU – Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller @…

Videostrong HC1 Home Care Hub is a Smart Home/IoT gateway designed for the elderly that also serves as a smart speaker with 10-meter far-field voice recognition, a video phone with a video built-in camera and speaker, and a 4K Android TV box. The system is based on an Amlogic S905Y4 quad-core Cortex-A35 processor coupled with up to 4GB RAM and 64GB RAM, supports Ethernet, WiFi, Bluetooth, Zigbee, and LoRa, WiFi, and Bluetooth connectivity, and offers both HDMI 2.1 video output, and HDMI 2.0 video input. HC1 specifications: SoC – Amlogic S905Y4 quad-core Arm Cortex-A35 @ 2.0GHz with Arm Mali-G31 MP2 GPU with OpenGL ES 3.2 support System Memory – 2GB or 4GB RAM Storage – 8G…

Makerfabs “ESP32-S3 Round SPI TFT with Touch 1.28″” is a small ESP32-S3 with a 1.28-inch round color touchscreen display, a microSD card, support for USB and battery power, and two “Mabee” extension connectors. The board joins other ESP32-S3 round display boards such as the Lilygo T-RGB board or Seeed Studio’s Round Display for XIAO, but with a thinner device, and a square PCB with trimmed corners instead of a round PCB like the other two. ESP32-S3 Round SPI TFT with Touch 1.28″ (E32S3128GC) specifications: Wireless MCU – Espressif Systems ESP32-S3R8 dual-core Tensilica LX7 microcontroller @ 240 MHz with vector extension, 512KB SRAM, 8MB PSRAM, Wi-Fi 4 & Bluetooth 5.0…

artifact-armbian-bsp-cli: hash more variables included in /etc/armbian-release View the full article

MYIR MYC-YG2LX is Renesas RZ/G2L CPU module with up to 4GB DDR4, 32GB eMMC flash, and various I/Os such as gigabit Ethernet, USB 2.0, camera and display interfaces accessible through 222 castellated holes, and designed for advanced HMI, IoT edge gateways, and other embedded devices with video capabilities. As a reminder, the Renesas RZ/G2L microprocessor comes with up to two Arm Cortex-A55 cores clocked at 1.2 GHz, one 200 MHz Cortex-M33 real-time core, a Mali-G31 GPU for 3D graphics interfaces, and a VPU capable of H.264 encoding/decoding. The company also offers the MYD-YG2LX development board based on the 45x43mm MYC-YG2LX CPU module with easy access to its interfaces.…

PiEEG is an open-source hardware Raspberry Pi shield that measures electroencephalography (EEG), electromyography (EMG), and electrocardiography (ECG) bio-signals and provides a brain-computer interface to applications or robots for gaming, entertainment, sports, health, etc… Ildar Rakhmatulin, a Research Associate at Heriot-Watt University in Edinburgh, is passionate about open-source brain-computer interfaces and first created the IronBCI project based on ADS1299 and STM32 and published a research paper entitled “Low-cost brain computer interface for everyday use” about his work. But cost increases related to the semiconductors shortage of recent years meant the price f…

We’ve previously seen it’s possible to connect an eGPU to a mini PC through a PCIe x16 to M.2 NVMe adapter or a Thunderbolt 3 port, but while it’s fine to install on your desk for gaming or develop AI applications, the eGPU being larger than most mini PCs, it’s a little too big to integrate into products, and potentially inconvenient to carry around. ADLINK Pocket AI portable eGPU changes that with an NVIDIA RTX A500 GPU housed in a 106 x 72 x 25mm box that’s about the size of a typical power bank and connects to a host through a Thunderbolt 3 connector. The company says the upcoming eGPU is mostly designed for AI developers, professional graphics users, and embedded indu…

rockchip64_common: refactor: extract BOOT_SPI_RKSPI_LOADER=yes into rock-3a, rock-5b, and orangepi5 no more such rockchip-rk3588 references in common code View the full article

Now changes to most variables/hooks affecting u-boot are correctly hashed and changes cause a recompile/cache miss as they should Extra: UBOOT_CONFIGURE=yes experimental, nothing fancy or magic, might be useful for some, does not export patches, only the defconfig bare. Goes a bit crazy if multiple targets (runs and exports twice+). View the full article