Allwinner sunxi

Can anyone provide any information on getting the GPU driver working with a Banana Pi M2 Zero? It supposedly has a Mali 400 GPU. In my tests, it seems I am stuck with Mesa software rendering with OpenGL. When I write a program that creates an OpenGL 2.0 ES context, the vendor and renderer both list Mesa and performance is terrible (2-10 fps and GLSL shaders are incorrect) when rendering even the simplest scenes. I am using DRM (Direct Rendering Manager) with boots straight to a CLI and no desktop environment if that makes any difference. With the same code and same conditions on a Raspberry Pi Zero 2 W, OpenGL works perfectly in my tests. I am usin…

I got the mali stuff working on my H3 on my orange pi one to great success for use with the HTC Vive, but I'm trying to get it working on my H5 on my Orange Pi Zero Plus 2. I can't seem to get any work done as far as installing the mali modules/etc since I can't find the mali node in any of the dtb's. Also, because I am trying to use the normal armbian system, instead of installing my own sunxi-next kernel. I've switched to nightly, but can't figure out how to edit my own changes to the dts's that are built to add add the extra mali node (not that I have any idea where the mali450 is on the H5!). Any help would be greatly appreciated. …

Hello guys here is a couple of questions regarding Mali/EGLFS on OrangePi One and Armbian v4.4.*. I am going to cross-compile and use Qt5 Embedded on Armbian v4.4.* and I strongly need QML engine for my development which requires eglfs plugin. Is Mali GPU supported on this version of OS ? How/where to get/compile user mode libraries (EGL+GLESv2) for this version of OS ? Thank you

Is there a way to compile MAME for the OPI PC? Many thanks in advance!

Hello, about a month ago I got MangoPi QM-Quad - quite nice board, but with small support. Hardware specification: https://mangopi.org/mqquad Review: https://bret.dk/initial-mangopi-mq-quad-comparison/ I needed a raspberry pi zero board with usb-c with both host and otg ports and external wifi antenna - so after some consideration I want with Mango-Pi QM-Quad. Sadly after some work with available distributions I finally give up with trying to compile / build everything I needed and moved to getting Armbian to run on the board. Thankfully board is almost identical with orangepi-zero2 - so modification with edge kernel only required m…

Hi Back in February '15 I have started to write an instruction about the setup of a BPi-R1 (Router). In the threads of the Forum, the information is scattered and it takes so much time for each to get along. So I thought such a document would help to become not only faster, but to achieve a better result as well, as you can faster spend time with the device and tweak it. My know how is getting better, but things are still missing. If you like to help the 'community' with your know how, please leave comments in the document if you find errors or you find something missing. Google Docs Thank you in advance - for your support Cheers Tido

I should install desktop release on my H3 (OPI PC), not server. after WIKI search, apt-get install xfce4 libmali-sunxi-r3p0 lightdm libvdpau-sunxi1 xorg xserver-xorg-video-fbturbo mpv some other apt-get not listed. I get XFCE runs on H3. and get video hwdec enabled. and some modify on asound.conf get HDMI audio works. /etc/asound.conf pcm.!default { type hw card 1 } ctl.!default { type hw card 1 } ---- with continue dig, I find I need to modify boot.cmd enable memory reservations to make it better. so the boot.cmd: setenv bootargs "console=ttyS0,115200 console=tty1 root=/dev…

How I solve this problem or is it an Ambrian bug? Maybe a better question is what is causing these repeated messages. I am at a loss to finding a solution. BOARD=bananapipro BOARD_NAME="Banana Pi Pro" BOARDFAMILY=sun7i Spoiler --< CUT >-- [ 50.900954] ieee80211 phy0: brcmf_fweh_call_event_handler: no interface object [ 50.900982] ieee80211 phy0: brcmf_fweh_event_worker: event handler failed (72) [ 50.976400] ieee80211 phy0: brcmf_fweh_call_event_handler: no interface object [ 50.976437] ieee80211 phy0: brcmf_fweh_event_worker: event handler failed (72) [ 51.025829] ieee80211 phy0: brcmf_fweh_ca…

Hi, I try to connect Orangepi lite to SIM800l module. I don't have any response on AT commands. I checked the module with Arduino and it works. So I connected Arduino and Orangepi and I can send messages from Arduino to Orangepi, but I can't get any message from Orangepi to Arduino. 1, On Orangepi I allowed UART3 via editing /boot/script.bin [uart3] uart_used = 1 uart_port = 3 uart_type = 4 uart_tx = port:PA13<3><1><default><default> uart_rx = port:PA14<3><1><default><default> uart_rts = port:PA15<3><1><default><default> uart_cts = port:PA16<3><1><default><defau…

Ok - first, i'm a noob, - second, I am in over my head. I am attempting to install Plex on my banana Pro - which i did. Up and working just fine. http://www.htpcguides.com/install-plex-media-server-on-banana-pi-with-bananian/ The issue that i'm having is that I am having trouble mapping/mounting a drive. I am using this command but get an error: mount –t cifs //networkip/share /local/linux/folder –o username=usernameonwindowsmachine,password=passwordforwindowsmachine I put in: "mkdir /mnt/nas" - and that works. When I type everything out, it looks like this: mount –t cifs //192.168.1.42/mnt /nas –o username=321barnes,password=Password th…

https://components101.com/sites/default/files/component_pin/Beaglebone-Black-Pinout.png I could not find a picture numbering the pins on an orange pi one. Up right pin by the arrow is pin1, pin below pin1 is pin2 and pin left to pin1 is pin3. http://www.orangepi.org/images/orangepione_info.jpg I want to use an orange pi one to install libreboot on a thinkpad t400's flashchip. Which of the following pins on the beaglebone black's p9 corresponds to which pins on the orange pi one? beaglebone black pin 17 -> ? 18 -> ? 21 -> ? 22 -> ? gnd -> ? 3.3v -> ? H…

Which is the maximum current delivered by the pin 5v of the gpio in an Orange Pi LITE? I would like to connect on it some sensors that needs 5v power supply. Thanks

Good afternoon. I have an Orange Pi One and I need to achieve the maximum boot speed. The ultimate goal is a kiosk mode and the only application on the QT. The network is not needed. The simplest way will probably be to change the run level to the single mode, but with this there are problems. Any tips, suggestions, experiences?

Allwinner_H3_Datasheet_V1.2.pdf up to five UART controllers In sun8i-h3-orangepi-pc.dts only 4 How do I use all five? serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = < 0x1c28000 0x400 >; interrupts = < 0x00 0x00 0x04 >; reg-shift = < 0x02 >; reg-io-width = < 0x04 >; clocks = < 0x03 0x3e >; resets = < 0x03 0x31 >; dmas = < 0x15 0x06 0x15 0x06 >; dma-names = "rx\0t…

Hello All, I'm trying to set-up MCP2515 on 8mhz on orange Pi one on SPI0 running recent installed Armbian 5.9 / Linux 3.4.113-sun8i can bus support orange pi zero i was reading trough above for pi Zero and trying get the unit up and running, but no luck till now, CAN unit is modifed, so 3v3 for mcp and 5v for can tranciever, connections: pin1 3v3 power on vcc for mcp2515 pin2 5v power for cantranciever pin6 gnd pin19/PC0(GPIO Orange PI) MOSI - (MCP2515<->CAN) SI pin21/PC1(GPIO Orange PI) MISO - (MCP2515<->CAN) SO pin23/PC2(GPIO Orange PI) CLK - (MCP2515<->CAN) SCK pin24/PC3(GPIO Orange PI) CS - (…

Hereby a tutorial to connect an MCP2515 based CAN bus interface to an OrangePi 3 running successfull with Buster minimal nightly with 5.3 kernel. It uses the attached user overlay only and doesn’t need any other overlay. Connections CAN module OPi3 26 pin header Raspberry CAN interface 40 pin header Vcc 3.3 CON12-P01 1 Gnd CON12-P06 6 MOSI CON12-P19 19 MISO CON12-P21 21 CLK CON12-P23 23 CS …

Hi, we are trying to make our Orange PI zero with custom shield working with an MCP2518FD on board with SN65HVD23 tranceiver. We started from the normal kernel already built, but according to this thread we found that it must be activated at compile time. So we downloaded the repo and built the Armbian image with this CAN configuration: CONFIG_CAN=y CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y CONFIG_CAN_GW=y CONFIG_CAN_J1939=y # # CAN Device Drivers # CONFIG_CAN_VCAN=y CONFIG_CAN_VXCAN=y CONFIG_CAN_SLCAN=y CONFIG_CAN_DEV=y CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_FLEXCAN=y CONFIG_CAN_GRCAN=y CONFIG_CAN_SUN4I=y CONFIG_CAN_TI_HECC=y CONFIG_CAN_C_CAN=y CO…

Hi! I am trying to setup a software raid with 2 usb hard disk on Orange Pi+ 2e. The raid is working well until i simulate a failure by unplugging the 2nd usb HD cable. The system become erratic and stop to respond command and/or crash. See below;;;; NOTE: latest Armbian image available Jessie legacy server, kernel 3.x basic image + apt-get update/upgrade then apt-get install mdadm armbian os is still on the sd card there is nothing on that raid * * * THE EXACTLY SAME TEST AND STEP WERE DONE ON A BANANA PI PRO (VANILLA SERVER, KERNEL 4.X) AND EVERYTHING IS WOKING FINE AND AS EXPECTED. * * * -----------------------------------------------------------…

I don’t own banana pi but I’m thinking of buying it for the project we’re going to do. I have raspberry pi zero but mediapipe is not working. Can I install this library on m2 zero? I would be glad if you help. Thank you.

I am trying to enable memory split on my board. I am using Armbian Stretch with mainline based kernel 4.19.y. No matter what I do, after reboot I get: root@bananapi:~# free -h total used free shared buff/cache available Mem: 996M 170M 613M 4.8M 212M 799M Swap: 498M 0B 498M I've already tried adding to armbianEnv.txt: disp_mem_reserves=on extraargs=cma=96M After first boot I've already relinked /boot/script.bin to /boot/bin/bananapim1plus.bin and added fdtfile=sun7i-a20-bananapi-m1-plus.dtb to /boot/armbianEnv.txt in order to ha…

Starting kernel ... <6>Booting Linux on physical CPU 0 <6>Initializing cgroup subsys cpuset <6>Initializing cgroup subsys cpu <5>Linux version 3.4.113-sun7i (root@vultr.guest) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Tue Jan 24 12:18:02 UTC 2017 CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: sun7i <6>Memory Reserved: <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB) <6> LCD : 0x44000000 - 0x44ffffff ( 16 MB) Memory policy: ECC disabled, Data cache writealloc <6&gt…

Hi, Got OPiPC with legacy and Ubuntu desktop, build 5.33. Gonna attach some external dynamic mic to OPiPC in place of the on-board condenser mic, replacing it. How can we stop the mic bias voltage? Can we do that from Alsa or Pulseaudio? Christos

I want to record sound using Orange Pi Zero. I connected MIC1PIN in single header in Orange Pi Zero and GND to my mic(I'm using simple mic which is used for arduino). Aplay works fine, but when I tried to execute arecord it gives an error. root@orangepizero:~# arecord -Dhw:0 -f cd test2.wav Recording WAVE 'test2.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo arecord: pcm_read:2103: read error: Input/output error When I execute arcord -l I got this, root@orangepizero:~# arecord -l **** List of CAPTURE Hardware Devices **** card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 My …

Hi, How i can find information for set the fex file, kernel, etc. etc. for use the spi in userspace? i don't see in /dev any spidevx.0 device

So can you guys help me debug, why I can't get the microphone to work on my Orange pi pc. Speaker works just fine. Arecord records nothing, silent file . Here is some terminal output: msev@orangepipc:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 msev@orangepipc:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 car…

Hello, I made my microphone setup with microphone mce103 according to this scheme pin 10 (MIC-BIAS) ..... 3 - 15V in scheme, pin 11 (MIC 1P) ....... NF, pin 12 (MIC 1N) ....... (-) in alsamixer I have: audiocodec, mic1_2 audio capture mode. then I tried: arecord -i -f S16 -r 22050 test.wav and it saved this wav file (in attachment). I am not able to record audio, it records just noise as in attached sample. What can be wrong please? test_.wav

Hello, I have a Orange Pi One Plus. It has an onboard mic. No matter what i do i cannot record sound from it. Please help, how can i record sound from onboard microphone? marko@orangepioneplus:~$ cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepioneplus BOARD_NAME="Orange Pi One+" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=d485420c00 VERSION=22.08.1 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable marko@orangepioneplus:~$ uname -a Linux orangepioneplus 5.15.63-sunxi64 #22.08.1 SMP Tue Aug 30 07:11:56 UTC 2022 aarch64 …

Hi, currently my small server is running under Armbian 5.16 on Orange Pi Plus 2 board. It is using eMMC as root fs. I am expecting to get Orange Pi Plus 2E to be delivered shortly. The question is if following procedure will be OK to migrate server between boards: before: stop services etc. 1. insert SD card (16GB) when system is running. eMMC is visible as /dev/mmcblk0, SD card will appear as /dev/mmcblk1. 2. use nand-sata-install to copy system to SD Card. 3. mount /dev/mmcblk1 under some mount point, for example /mnt 4. verify, if /mnt/etc/fstab is valid: /dev/mmcblk0p1 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 5. modify lin…

Hi, I am migrating from legacy 3.x kernel to bionic mainline 4.14 at OrangePi Zero 2 plus. Previously there is a fex files to enable or disable some features such as onboard wifi, mali, hdmi and other. now I found no ways to disable it, overlays does not include this features. Is there any way to edit dtb files? or? Thanks

Hi everyone, I got a problem with my beloved Armbian. I switched form a (SD-killing) Pi1 to a OrangePi. Everything runs fine except my Busware SCC (a RF interface for Homematic home automation). The module sits on the extension header and uses Pins 8 and 10 for the UART as well as pins 11 for reset and pin 12 for the bootloader. For the device to work normaly, pin 11 (GPIO17 on the rpi) has to be set high, else the device will stay in reset. Pin 12 I just left as it was on the rpi, the manual says I'm running ARMBIAN 5.36 with kernel 4.13.16-sunxi. If I understood it correct, pin 11 should be GPIO1. To set it high, I use the following code in r…

Hi guys orangepi-one and i'm trying to install the Super Nintendo Classic Controller wich is i2c bus /---------\ | | | 1-2-3 | | 4-5-6 | | _____ | \_/ \_/ ``` | Controller Pin | Function | Pi Pin | |---------------:|---------------|-----------| | 1 | I2C data | 3 (SDA) | | 2 | device detect | - | | 3 | +3.3V | 1 (+3.3V) | | 4 | GND | 6 (GND) | | 5 | not connected | - | | 6 | I2C clock | 5 (SCL) | i have wired the controller to the orangepi bus port 0 and port 2 i found a driver fo…

Hi Few days ago i've upgraded by armbian to the newest release version 5.17? from 5.11. The problem is, that minidlna DLNA server is only visible for few minutes after the service is started. Later i need a restart the service to make it visible for the new clients. The strange is that when i don't exit/shutdown the client, after the server discovered, it stays visible and works perfectly. But i want to make it visible for a newly started client, i need to restart the service. It doesn't seem to be client problem, as the same happens with my samsung smart tv, and a windows pc with foobar 2000 dlna plugin. What's the problem? (it maybe a broadcasting problem)

Hi, with the Cubieboard 1 there's a bug with the kernel inotify's option. The problem is that Minidlna uses this feature in order to update its dabatase, but since on Cubie it doesn't work, I've tried both ArchLinux Arm and Armbian, i can't have an updated db. Do you know if there's any solution in order to fix this issue? Maybe trying another kernel, different from the default linux-sunxi? Thanks for your time! Marco

Dear all, I copied Armbian 4.5 (on cubietruck with kernel 4.3.3) from SD to SSD using the script "nand-sata-install.sh". The resulting system with /boot from SD and rootfs on SSD works fine. However, the "Welcome to Armbian" message generated upon login contains the error message "df: cannot access ‘/dev/sda1’: over-mounted by another device" (see below). It seems to be related to mounting /boot from SD. Do you have any suggestions how to get rid of the "df: cannot access" message ? ____ _ _ _ _ / ___| _| |__ (_) ___| |_ _ __ _ _ ___| | __ | | | | | | '_ \| |/ _ \ __| '__| | | |/ __| |/ / | |__| |_| | |_) | …

Armbianmonitor for 5.4.6: http://ix.io/260C From switching between 4.19.x and 5.4.x kernels I noticed that the lower cpu frequencies got missing. It should start at 120MHz like this: root@horangepione:~# uname -a Linux honeypot2 4.19.84-sunxi #19.11.3 SMP Mon Nov 18 18:39:42 CET 2019 armv7l GNU/Linux root@horangepione:~# cpufreq-info -o minimum CPU frequency - maximum CPU frequency - governor CPU 0 120000 kHz ( 11 %) - 1008000 kHz (100 %) - ondemand CPU 1 120000 kHz ( 11 %) - 1008000 kHz (100 %) - ondemand CPU 2 120000 kHz ( 11 %) - 1008000 kHz (100 %) - ondemand CPU 3 120000 kHz ( 11…

Hello everyone, I have a10 board and i'm trying to plug 7' LCD wich touchscreen (http://www.waveshare.com/wiki/7inch_HDMI_LCD_(B)). Chinese manufactorer changed usb pid/vid, and in fact this touchscreen is eGalaxTouch. And when i'm trying to build driver - it requires uinput module, which is missing. Is it possible somehow to get it? On my desktop debian /dev/uinput is preseted by default. Sorry for my bad english. Regards.

Hi I'm an happy user of : Armbian_5.14_Orangepipc_Debian_jessie_3.4.112_desktop.7z. I don't know if it is bad luck or some obscure legal reason but 2 of my USB dongles needed to add firmware files from other distributions before they worked perfectly: They are : TerraTec Electronic GmbH Cinergy T RC MKII using dvb_usb_af9015 missing dvb-usb-af9015.fw 15913 bytes from 30/03/2015 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter using rt73usb module missing rt73.bin 2048 bytes from 24/11/2014 I hope those files can be added to ease the life of newbies.

Hi, on my BananaPI I installed this image: Armbian_5.10_Bananapipro_Debian_jessie_4.5.2_desktop.raw I followed these instructions: https://searchathing.com/?p=250 to move / to SATA (or USB) and crypt it with LUKS. After all, cat /proc/cpuinfo says, there is only 1 CPU-core. How can I activate the 2nd core? Thanks for your help

I have two Olimex Lime 2 eMMC boards, both set up the same way – same HDDs, same batteries, same power supplies, etc. Both run: - Armbian 5.31 (although one was updated to it, and the other was freshly installed with that version) - Debian 9 “stretch“ (same issue when they were both on Debian 8 “wheezy” though) - Linux kernel 4.8.14-sunxi Yet, one shows the CPU temperature, and the other doesn’t. A (the fresh-installed one): cat /sys/class/thermal/thermal_zone0/temp 41800 B (the one updated to 5.31 from a previous 5.x version): cat /sys/class/thermal/thermal_zone0/temp cat: /sys/class/thermal/thermal_zone0/temp: Inv…

Hi! I'm trying to use the image Cubietruck_Debian_3.8_jessie_4.0.4.raw with my CubieTruck, but run into problems when trying to use an external LUKS-disk which is encrypted using aes-xts-plain64. 'cryptsetup luksOpen' informs the following: device-mapper: reload ioctl on failed: No such file or directory Failed to setup dm-crypt key mapping for device /dev/disk/by-uuid/<xxxx>. Check that kernel supports aes-xts-plain64 cipher (check syslog for more info). 'cat /proc/crypto | grep name' lists only this, which seems kinda minimal: name : stdrng name : stdrng name : crc32c name : deflate name : ecb(arc4) name …

Hello, Hello, I have connected a pcf6523 RTC module to my OrangePI plus 2E and I can not get it to work. The i2cdetect -y 0 command gives me the following answer: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- 04 -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: 20 21 22 23 24 -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: 40 41 42 -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- -- 70: 70 -- -- -- -- -- -- -- The next thing I have to …

Hi, I've installed the latest available xenial image for orangepizeroplus2-h5 and also upgraded all the packages, so currently running on 4.14.14-sunxi64. I can see the following parameters in the kernel config file: CONFIG_USB_CDC_COMPOSITE=m CONFIG_USB_FUNCTIONFS=m But at the same time the actual modules are missing: ls: cannot access '/lib/modules/4.14.14-sunxi64/kernel/drivers/usb/gadget/libcomposite.ko': No such file or directory ls: cannot access '/lib/modules/4.14.14-sunxi64/kernel/drivers/usb/gadget/function/usb_f_fs.ko': No such file or directory Does it look like some issue during the image build process (if so, do …

In download section for X2 Beelink there is no image for Server stretch test as advertised on download page, only for desktop. Is it normal ? (tm)

I downloaded "Armbian_5.04_Bananapipro_Ubuntu_trusty_3.4.110_desktop.zip" but after installing I found that it has two basic issues >> (1) Mounting of USB sticks .. (2) No preinstalled classical Network manager .. so I wonder how to connect USB EVDO type modems in absence of network manager ? P.S :- target Board is Banana pi.

I am on Debian 7.9, kernel 4.1.6-sunxi. Since a couple of days I get an error message when I want to open a LUKS container (e.g. cryptsetup luksOpen ...). /dev/mapper/control: open failed: Kein passendes Gerät gefunden --> no device found Failure to communicate with kernel device-mapper driver. Check that device-mapper is available in the kernel. Kann die Gerätezuordnung nicht initialisieren. Ist das Kernelmodul dm_mod geladen? --> is dm_mod really loaded? I tried to manually load dm_mod and get another error message: > modprobe dm_modlibkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/4.1.6-sunxi/modules.dep…

Hi guys, I´m trying install kodi 18 on my orange pi lite with this tutorial (https://ua3nbw.ru/all/kodi-18-armbian-orangepi/) everything is fine, but MPV player is complete missing on armbian OS. Why? Thank you.

hey guys, i just got my nanopi m3 today... and see that the download for it is gone from the site? -can anyone help? -erik

Board: NanoPi NEO Air SoC: Allwinner H3 (sun8i platform) Armbian Release: Bookworm (Debian 12 base) - Tested with both beta and stable repositories. Problem Description: The SPI device node (/dev/spidev0.0) does not get created on Armbian Bookworm for the NanoPi NEO Air, preventing the use of SPI peripherals. This issue occurs despite correctly enabling the sun8i-h3-spi-spidev overlay in /boot/armbianEnv.txt. Diagnosis / Root Cause: Through troubleshooting, it was determined that the essential kernel module required for the Allwinner SPI controller, spi-sunxi.ko, is missing from the standard kernel image packages provided by Armbian for Boo…

Dear all, I'm missing ttyS1 from the devicelist on my cubietruck with mainline uboot and debian Jessie kernel 3.18. Now i can not use my bluetooth module because it is not reachable. I've searched on the internet and the defenition of one (or more) uart port seems to be missing in the devicetree dtb file. Like in: http://forum.armbian.com/index.php/topic/382-armbian-on-pcduino3/ Has anyone fixed this for the cubietruck?

Hey. I'm not sure if I perhaps caught the Armbian website in the middle of an update, but there doesn't seem to be any Ubuntu (Xenial) builds for H3 boards anymore ... with the exception of the NanoPi Neo. It's all Legacy Jessie builds right now. Thanks,

So.. this neat board has mainline kernel but with no video output and it has a mali panfrost GPU. My question to all you dev pros of the kodi tv boxes is... Is there anyone capable to fix video output on this wee board that has it on radxa 5.15 default debian kernel?

hi all, i had a orange pi zero board that worked fine until yesterday. MY BOARD IS ORANGEPI ZERO (not 2) i upgraded the OS armbian : Linux orangepizero 6.6.31-current-sunxi #1 SMP Fri May 17 10:02:40 UTC 2024 armv7l GNU/Linux the board worked fine until the last reboot in order to test octopi startup, but before this reboot the OS was upgraded and rebooted the issue now is that the wlan0 seems to be always down i do a lot of setup but it still to remain down, i am not a very expert with these board but i am very new with this kind of issue. can anyone help me with the troubleshooting ? …

I used the wrong power adapter this morning on one of my OPI PC... what could go wrong? So far, I noticed that the poor U5 - SY8008B regulator overheated and blew. From the schematics, this seems to be connected to "AVCC" (the H3's PLL and the TV out). U11 isn't outputting anything, but chip select is off. Since this is the USB host, I'm not too surprised. Is it worth trying to reflow a new regulator on ? Wondering...

https://github.com/MaverickLong/MLIR-TIM-VX This is an MLIR-based lowering path from the TOSA v1 dialect to TIM-VX, VeriSilicon's OpenVX-based GPU/NPU ML Framework. It includes the lowering from TOSA v1 to a custom timvx dialect (mirrors the TIM-VX C++ semantics) and a full lowering to C++ source. It is currently on par in inference speed with the vendor ACUITY compiler pipeline while still giving you full control on the graph level. In my own testing, on a Radxa Cubie A7Z \w Allwinner A733, ResNet-50 takes 8.0ms to inference, while the ACUITY-compiled baseline takes 7.3ms according to Radxa. It all starts with Radxa/VeriSilicon's fa…

I'm not familiar with the a64 graphics driver and some tty graphics software of mine is failing on Armbian Ubuntu Focal after working fine on the Bionic image. Earlier I was able to mmap() /dev/fb0 to display graphics in a tty. On Focal 20.04, running linux 5.4.43-sunxi64 , mmap() on /dev/fb0 is failing with EPERM (operation not permitted). Is this new error something anybody knows about or could give a link to find a possible driver change that's responsible? It seems there might be a few different video drivers on this system and I haven't looked at them before. /sys/class/graphics/fb0/name contains sun4i-drmdrmfb /sys/class/gr…

Device: Orange Pi +2e. Environment one 16GB SD Card and 16GB eMMC onboard. Output from Armbianmonitor attached. The eMMC device onboard is always detected as mmcblk2. Irrespective of whether SD Card is present or not or if you boot from SD Card or eMMC. This is observed only on 20.05 and 20.08 builds. It does not happen on 20.02 build. [ 3.769548] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator [ 3.781702] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.784384] mmc0: new high speed SDHC card at address aaaa [ 3.785778] mmcblk0: m…

Like whaaaaaa... Okay, so long and frustrating story short, I have been having inexplicable stability issues on my Banana Pro. I have blamed the SD card, the power supply, the micro USB cable, but none of those leads seemed to actually lead anywhere. I connected up a Fluke multimeter to the SATA power output, set to peak min mode, to see if I get any undervolting... Nope, no problem there. I ran stress tests on my sd card on my computer - it was PERFECT. I was completely stumped... Until, after getting an Anker charging cable, and having a really good run with the new Armbian release - the system had been working for an hour without glitches, apt-get worked, I hav…

After last upgrade Armbian on OrangePi PC Plus from version ARMBIAN 5.73 stable Ubuntu 16.04.5 LTS 3.4.113-sun8i - 3.4.113-sun8i #16 SMP PREEMPT Thu Jan 31 08:15:34 CET 2019 armv7l armv7l armv7l GNU/Linux to Ubuntu Xenial with Armbian Linux 3.4.113-sun8i - 3.4.113-sun8i #2 SMP PREEMPT Wed May 8 15:09:43 CEST 2019 armv7l armv7l armv7l GNU/Linux the modem on port ttyS3 stopped working. dmesg | grep S3 [ 0.621150] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI ls -la /dev/ttyS3 crw-rw---- 1 root dialout 251, 3 Oct 15 13:03 /dev/ttyS3 script.fex [uart0] uart_used = 0 uart_port = 0 uart_type = 2 uart_tx …

Hello! The same issue was solved one year ago: Module 'nls_utf8' was missing in armbian 5.3.6 (4.13.16-sunxi64) Some time ago, the absence of a module was again discovered, without which the 'mount' with option 'iocharset=utf8' fails with error. The output of: grep -i nls_utf8 /boot/config* is # CONFIG_NLS_UTF8 is not set Please include again the module 'nls_utf8' in kernel update. Thank you very much! Denis

Hello: First, thank you for all your incredible work in armbian. It is really great what you've done so far. And future looks even better. I come here to try to solve a problem that I have with a cheap usb wifi dongle. The dongle usb identifier is: Bus 001 Device 006: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter With armbian 5.14 (and a fresh install image), I followed the instruction here https://forum.armbian.com/index.php/topic/1237-tutorial-opi-one-wireless-success/ to let it work, without problems. Nice tutorial. My problems began when I was trying to use the same dongle with a fresh installed armbian 5.20. The dongle is not auto…

Hi everyone, after getting Igor's image for Jessie with kernel 3.4.109 on January 10th, I did an upgrade and now I get: uname -a Linux cubieVDR 3.4.110-sun7i #10 SMP PREEMPT Mon Dec 28 11:48:43 CET 2015 armv7l GNU/Linux However, unfortunately I also get modprobe bcmdhd modprobe: FATAL: Module bcmdhd not found. According to http://www.armbian.com/documentation/, it does not say anything about having to do something special to obtain the module in the section called "How to set wireless access point?". Also, on another machine running kernel 3.4.108, everything is working fine (see my post in this forum). What do I need to do to get the AP working? Cheers…

Hi everybody, I work on my Orange Pi Plus 2 since a few days now. I've installed Armbian with linux Kernel 3.4 (Debian Jessie) on eMMC. One of my main objectives is to bond the WiFi and the Ethernet interfaces in one interface called bond0 (I've seen many examples on how to do this on the Internet). My configuration seems to be good (it's based on the default interfaces.bonding file, just changed it with my WiFi parameters). When I restart networking service, none of my interfaces get up. I've tried to update/upgrade my stystem, reinstall ifenslave. I've also checked module list with lsmod, it returns a lot of names, but not "bonding" module. …

Hello everyone, I want to make up a RAID 1 array with two disk, but mdadm tells me that I can't find the md_mod module : mdadm: Note: this array has metadata at the start and may not be suitable as a boot device. If you plan to store '/boot' on this device please ensure that your boot-loader understands md/v1.x metadata, or use --metadata=0.90 Continue creating array? y modprobe: FATAL: Module md_mod not found in directory /lib/modules/4.19.13-sunxi64 mdadm: Fail create md0 when using /sys/module/md_mod/parameters/new_array mdadm: unexpected failure opening /dev/md0 I looked up the /lib/modules/4.19.13-sunxi64 directory,…

Hi, I'm trying to use the rbd Kernel module but it is somehow missing: root@node1:~# modprobe rbd modprobe: FATAL: Module rbd not found in directory /lib/modules/3.10.107-pine64 How can I load this Kernel module? It's Armbian 5.43.180418 on a OrangePi Win Plus. Best, Tobias

Hello, I`m used armbian build script (from ) and got image without module tv. Why it missed module tv (video/sunxi/disp2/tv)? There it bug or legacy kernel doesn't support cvbs output? How can i add this module to image?

The module ds2490 seem to be missing in the new release. Should be: /lib/modules/4.19.62-sunxi/kernel/drivers/w1/slaves/w1_ds2490.ko

Hello Guys, I want to use airodump-ng (Aircrack-ng Suite) or Kismet to get all WiFi Clients in the area. For that, I would like to use the internal WiFi Chipset (so I don't have to use an external WiFi Dongle). My problem is, after I enable the monitor mode (with iwconfig and/or airmon-ng), which gives me no error and it says, the monitor mode is enabled, I am getting no results with Airodump-ng nor Kismet. Are there any solutions for this problem? Is is the driver not capeable of using monitor mode? Thanks in advance, KittFanNr1

Hi, recently moonlight embedded has been added support for VDPAU. git repo I tried to compile it with no success. Unfortunately I dont have enough knowledge to make it work. I used Orange Pi one and armbian 5.30 legacy, getting error no video available and no VDPAU. Does anybody managed to run moonlight on Orange Pi?

As I reported yesterday, after an upgrade, wifi was lost. Although wlan devices were visible via ifconfig, no connection to AP was possible. (8192cu driver) Today I tried to have fresh Armbian build , got a 5.23 jessie login as: root root@192.168.1.15's password: _ _ ____ _ _ _ | \ | | __ _ _ __ ___ | _ \(_) | \ | | ___ ___ | \| |/ _` | '_ \ / _ \| |_) | | | \| |/ _ \/ _ \ | |\ | (_| | | | | (_) | __/| | | |\ | __/ (_) | |_| \_|\__,_|_| |_|\___/|_| |_| |_| \_|\___|\___/ Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.112-rt143-sun8i System load: 1.31 Up time: 3 min Memory usage: 15 % of 490Mb IP: …

Board OPi Zero 512, NEXT kernel 4.13.7, last Sunday compiled. I'm trying do start more than one Dallas 1 wire interface. My primary idea was to add second w1-gpio overlay but no success. The next one is to edit device tree for w1-gpio to add another pin, and then to edit fixup script. And need some help to understand this ( copied from sun8i-h3-w1-gpio.dts ) fragment@0 { target = <&pio>; __overlay__ { w1_pins: w1_pins { pins = "PD14"; function = "gpio_in"; }; }; }; fragment@1 { target-path = "/"; __overlay__ { onewire@0 { compatible = "w1-gpio"; pinctrl-names = "default"; pinctrl-0 = <&w1_pins>; gpios …

Hi, after upgrading from Wheezy to Jessie (Legacy, i followed the documentation), everything is ok, except MOTD does not show TEMP, and other data as used in Wheezy, is this a known problem and how can i get back the old MOTD? Another question im struggling setting up slovenian keyboard layout any info on that? dpkg-reconfigure keyboard-configuration gives me an warning: root@bananapi:~# dpkg-reconfigure keyboard-configuration update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults insserv: script ramlog.uninst: service ramlog already provided! update-rc.d: warning: start and stop actions are no longer supported; falling back t…

Hey guys, I have a Banana Pro and recently switched to Armbian from Bananian. I boot from an HDD connected to the SATA port on bpi. Apparently the root fs is supposed to get resized to the max size(1TB in my case) during the first boot. But, well, it didn't work for me.. so instaed of 1TB I had 1.5 GBs. I wiped the partition in fdisk and created a new one using the old starting block(2048) but leaving the end to default. Result: I now have all the space available to me but everytime I log in it still says "90% of 1.5G". Why doesn't it scale?I know this is kinda ridiculous but I'm a perfectionist haha. ____ ____ _ ____ …

Hello Im trying to mount an USB HDD on my Orange Pi One with Armbian 5.20 like this and never mounts. In previous versions i was able. What i do is add this lin to Fstab /dev/sda1 /mnt/usb ntfs auto,users,noexec,rw, uid=1000,gid=1000 0 0 Anybody tried to mount any usb with Sucess? Thanks 4 ur help

I have a little problem: my fstab: root@osirisBpiM3:~ # cat /etc/fstab /dev/mmcblk0p2 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 tmpfs /tmp tmpfs defaults,rw,nosuid 0 0 /var/swap none swap sw 0 0 //192.168.0.11/media /mnt/openelec/media cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.11/media2 /mnt/openelec/media2 cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.11/big850gig /mnt/openelec/big850gig cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.2/C$ /mnt/sophie/c cifs iocharset=utf8,credentials=/root/.smbcredentialssophie,uid=1000 0 0 //192.168.0…

I installed the "buster" version on the orange board PI PC. I would like to set it as a dlna server. I have installed package minidlna, but it doesn't automatically mount the hard disks (formatted NTFS) inserted on the USB ports. what should I do ?

I have a cubieboard2 (A20 - sunxi 7i) and i have attached an Foresee EMMC to it and i am able to boot a customised Sunxi-Kernel (3.4.104) from it. I also have an SDCARD with Armbian (Legacy) Jessie which also boots fine. My question is what do i need to do in order to get Armbian (legacy) Jessie to be able to mount the emmc? When i boot up Armbian via the sdcard, i can't see the emmc. Am i doing something wrong, or do i need to make some changes to the .fex file? Should i use the Armbian tool to make changes to the .fex file and roll a new u-boot, if so, can you guide me as to what changes i need to make in order to see both the sdcard and emmc flash devices from…

hi orangepi 2e+ with ARMBIAN 5.65 stable Ubuntu 18.04.1 LTS 4.14.84-sunxi syslog I want to mount my external hard disks with cat /etc/udev/rules.d/91-intenso.rules KERNEL=="sd?1", SUBSYSTEMS=="usb", ATTRS{serial}=="31700000000000007023", SYMLINK+="Intenso", ACTION=="add", RUN+="/bin/mount /dev/Intenso /mnt/Intenso" Normally no problem, tested with Armbian_5.65_Orangepiplus2e_Ubuntu_xenial_default_3.4.113 and Workstation PC Linux 4.15.0-43-generic #46~16.04.1-Ubuntu. With my current version, I have a problem. The udev-rule is/seem ok Spoiler orangepi@orangepiplus2e:~$ sudo udevadm test /sys/class/block/sdb1 calling: test …

HI, I have a orange pi zero + with a NAS board (orange pi zero nas) with a msata ssd (kingspec 64 Gb): But armbian don't releave msata device, because with fdisk command I have: fdisk -l Disk /dev/ram0: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram1: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram2: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of …

After I copied the original OS from the SD card to an external usb HDD and make the Orange PI PC boot from it, mouse and keyboard suddenly don't work anymore on xfce. Strangely the keyboard still works with CLI. Also i got this error when I start armbianmonitor -u : root@orangepipc:~# armbianmonitor -u System diagnosis information will now be uploaded to /usr/bin/armbianmonitor: line 388: read: read error: 0: Invalid argument /usr/bin/armbianmonitor: line 389: [: -ge: unary operator expected /usr/bin/armbianmonitor: line 388: read: read error: 0: Invalid argument /usr/bin/armbianmonitor: line 389: [: -ge: unary operator expected /usr/bin/armbianmonit…

I have dd'd Armbian "stretch" onto a 16GB SD card and it's booting my CubieTruck fine. But I have no clue how to move it from there (mmcblk0p1) to my attached 128GB SSD (sda1). I've tried the nand_sata_install shell script but it appears to be a bit old (2 years), created a bunch of weird temp directories: root@cubietruck:~# df -h Filesystem Size Used Avail Use% Mounted on udev 939M 0 939M 0% /dev tmpfs 202M 4.0M 198M 2% /run /dev/mmcblk0p1 15G 1.1G 14G 8% / tmpfs 1006M 0 1006M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 1006M 0 1006M 0% /sys/fs/cgroup tmpfs …

Hi, Thanks to this great project I sucessfully installed armbian on my cubietruck and moved the installation (Vanilla Jessie) to a hard disk. Now I want to move the remaining SD parts (obviously only /boot) to another (much smaller) SD card. Creating a partition and copying the stuff 1:1 does not work (leaves the new SD card unbootable. How to achieve the above? Thanks Thom

Hello. Sorry for my bad English. I have just acquired an Orange Pi plus 2e. Armbian Xenial is installed on emmc. I wish my SD card to become my /home. Can you help me? Thank you.

HI.. I have an opi zero and I want to copy the card and use it in a NanoPi Neo I plugged it in and it works but displays Orange Pi Zero on the login screen. What steps should I take to make it work best in the NanoPi Neo? Thanks. V.

Hello all, I've been struggling to build Armbian for the Orange Pi Pc all day today, it worked fine yesterday then today nothing. I've just been looking through the repo at github and it appears that all of the patches for building sun8i-h3.dtsi etc have been moved to linux-dev does this mean that from now on we need to build the dev kernel not the next kernel for H3 devices?

I have tested Trusty 5.04 on my Orange Pi PC. It looks very good but perfomance is low because of slow read/write Process from SD Card; especially Browsing.. Is there an easy way (Noobish) to move the Filesystem to an externel Harddisk (booting from SD Card,working with HD)? Regards

Hello! I try use UPort 1150 on my OrangePIPC+ board, but got error misiing firmware. After lookup I check that this files was missed, so I copy from RaspberryPi4 board (with Armbian 22.04) moxa folder & ti_3150.fw, ti_5052.fw. Then after reboot all work ok. So, is this that I missed in configuration or this is a bug? Regards, Alex

Hi All! I am running latest jessie desktop, and experience problems with pre-insatalled mozilla. There is no sound, except on the youtube site, that runs html 5 player. What can i do to bring sound back? All the online players looking like playing, but i hear only silence.

Hi there, I have OPi3 (not B nor LTS), now I got an SSD module ( https://allegro.pl/oferta/dysk-ssd-128gb-msata-6gb-s-13044566959 ), and it does not seem to work (nothing related in lsblk). I am using Armbian 21.02.3). Any ideas? the red LED is on, mechanically looks compatible with socket do I need something to enable this? armbianmonitor -u : http://ix.io/4Bkf

Hello, I made a fresh install of Ubuntu 16.04 lts (ARMBIAN) on armhf cubietruck (Armbian_5.20_Cubietruck_Ubuntu_xenial_3.4.112) . libav-tools is installed along with MPD & MPC. service mpd status reports: "mpd[6770]: /usr/bin/mpd: error while loading shared libraries: libavformat-ffmpeg.so.56: cannot open shared object file: No such file or directory" What is missing to start MPD? Best regards, Martin

I'm not sure if I should pursue this here or if I should open a ticket through Debian Bugs. A recent update now causes mpd to segfault. mpd comes from the Debain armhf repository. I'm not sure how to determine if this is a hardware issue with my board somehow or if there is an interaction with a new kernel or if it's because the package updated the binary or a library. To make sure it wasn't something weird in my configuration I moved the conf file out of the way and re-ran mpd with the same result. If it helps, I can post an strace output of the issue. James

Hello to all! I'm using orange Pi pc with Armbian Xenial desktop legacy kernel 3.4.113-sun8i and i'm not able to configure mpv to play correct .avi videos. Like suggest in some old posts if try vo=vdpau video works but immages are very distorted (big pixel and strange color), instead if i use vo=x11 immages are ok but video plays very slow. With vo=vx MPV dont start. Has been found a solution?

today I compiled a image for my OPi One: Armbian Buster with Linux 5.4.2-sunxi package bsp-kernel[19.11.3.342] u-boot[19.11.3] dtb[19.11.3.342] firmware[19.11.3] config[19.11.3] branch[dev] but mpg123 is playing a 128kb/s Radio-Stream much too fast via HDMI (hw:0,0) - streaming the same URL via a USB-Audio-Dongle (hw:1,0) has the right speed Spoiler root@opi-one(192.168.6.114):/toshiba/iradio/stations# more ./MP3_SAW_80s http://saw-de-hz-fal-stream10-cluster01.radiohost.de/saw-80er_128 root@opi-one(192.168.6.114):/toshiba/iradio/stations# mpg123 -v -b 2048 -a hw:1,0 -@ ./MP3_SAW_80s High Performance …

if use: mpv --vo=vdpau --hwdec=vdpau --hwdec-codecs=all --fs --loop=yes /media/usb/*.mp4 hardware decoding work if use mplayer mplayer -stop-xscreensaver -ontop -quiet -fs -vo vdpau -vc ffmpeg12vdpau,ffh264vdpau, -loop 0 /media/usb/*.mp4 hardware decoding not work Howto use mplayer with hardware decoding videoplaying on Orange PI PC v1.2?

Hey all I'm trying to get an Orange Pi Zero (256MB) to talk with an MPU6050. (ARMBIAN 5.31 stable Ubuntu 16.04.2 LTS 3.4.113-sun8i) I've installed i2c. When I have a little OLED screen attached I get: root@orangepizero:~# sudo i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- 3c -- -- -- 40: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- …

Hi!. I'm trying to run mpv on an orange pi plus 2e but it is giving me the following error: Failed to open VDPAU backend libvdpau_sunxi.so: can not open shared object file: No such file or directory [Vo / vdpau] Error when calling vdp_device_create_x11: 1 Error opening / initializing the selected video_out (-vo) device. I have also tried running KODI and it does not run. I am using version 5.25. I'm newbie Thank you very much!

Hi, Just flashed latest version to opi plus 2e. But I can't open mpv. When I double click or (right click and play with mpv) a video file I can hear sound of the movie but there is not any gui or video. What could be the problem?

Can any one port the driver for ms5611 from kernel4.x to 3.4.39? I am using the sensor on olimex a20 micro 4Gb. I need it to use it in Android. I am willing to pay for porting.

Hello, I would like to ask whether any user has managed to set up any of Igor's image for playing movies (mkv, mp4, avi). Could anyone point to an updated guide or give his own instructions? Thanks in advance.

At Raspberry Pi (at least on R.Pi 4) it is possibility to set up more than one 1-wire bus. Can that be done on Orange Pi plus 2e with Armbian? uname -a Linux XXXXXXXXXXX 5.15.93-sunxi #23.02.2 SMP Fri Feb 17 23:49:46 UTC 2023 armv7l armv7l armv7l GNU/Linux /boot/armbianEnv.txt verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun8i-h3 rootdev=UUID=d908a8da-8d2e-4802-8a05-aaab4f3290bb rootfstype=ext4 overlays=w1-gpio param_w1_pin=PD14 param_w1_pin_int_pullup=0 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u If it is possible: Any tip on configuration will make me happy. And can it be internal pu…

How can i use multiple microphone with Orange Pi Zero to make voice enable device?