Allwinner sunxi

Hi, I have noticed very strange behaviour of my OrangePi PC Plus. Device is connected to internet via Wifi. After successful connection, device is connected to VPN service. A cron script is checking every minute if VPN is working, and if not, it is restarting connection. On every hour, Network Manager is being restarted (you will see why is that so later). On every minute NTP is querryed for time synchronisation. After VPN restart or rebooting of device, device sends an e-mail notification via GMail. On eth0 there is DHCP server running (dnsmasq), which is providing internet to a device connected to OrangePi. So basically, you plug in ethernet cabl…

Hi, I've tested more than 10 pcs of Lime2 rev. G and those that I received from Olimex in last supply (Jan 2017) has strange behavior, all of them. It won't boot if HDMI connector is plugged in (tested with two different screens). There is only simple message in console repeated crazy fast "rb int error!". Googling returned only two links to source code I use latest version 2017.01-armbian (Feb 02 2017 - 02:40:37) - Armbian_5.25_Lime2_Ubuntu_xenial_default_3.4.113.img When I try older Armbian 2016.09-armbian (Sep 15 2016 - 03:51:47 +0200) everything is fine. What has changed? I attach the beginning and the end of the serial console output (workin…

I'm running an updated armbian stretch mainline on a nanopi neo and hitting a wall where I thought there would be no obstacles in my path. I'm using 433Mhx Tx and Rx devices so I'm building WiringNP (from FriendlyArm) and rfoutlet (from github.com/timleland/rfoutlet.git). I'm getting errors such as wiringPi ISR: Not implemented when running RFSniffer. [This is the current error, it's been one after another]. My mind is muddled at the moment since I've done this kind of thing several times in the past on other devices including the Orange Pi Zero. Can someone tell me if this is me, or if it's a NanoPi Neo-thing? Shouldn't this be straight-forwa…

Tried installing Armbian_23.11.1_Nanopineoplus2_jammy_current_6.1.63.img and it is super slow during first boot process regardless of SD type. Localization craps out with "Failed to set time zone: Transport endpoint is not connected". I boot with wired Ethernet and when I get to a prompt I can ping outside locations. apt update produces "Hash Sum mismatch" Anyways, doing my part testing legacy boards, hahahaha

Hello, I have problem that wireless interface only reachable when ethernet cable plugged to my orange pi zero. I use nmtui, to setup my WiFi connection. All connects fine and works. But when I disconnect ethernet cable, I lost also WiFi connection. I see this post: https://forum.armbian.com/topic/4098-orange-pi-zero-wifi-issues-when-disconnect-ethernet-cable/ But even after rebooting without ethernet cable, WiFi connnection doesn't work. Then in a new clean image, I try to run nmtui without connecting ethernet cable. WiFi connects without any errors, but doesn't work. Please, help! Spoiler This is my ifconfig -a, when …

I had successfully installed Armbian_2022.08.8_Bananapi_bullseye_CLI_5.15.74 on my M1 and copied the system to an SSD which I had attached to the SATA port. Then I had updated the UUID in armbianEnv.txt and running the system from SSD was working fine. The system was running headless in my closet for about 2 months, and I even had no problems to remotely restart the device until today, when it did not come back up after a reboot. I took it from the closed and hooked it to a monitor just to see the following error messages: ** Bad device specification mmc 0 ** Couldn't find partition mmc 0 I suspected a broken SD card but a check on my Ubuntu de…

How can I change to a ramdisk in Cubietruck? I have seen in boot folder that are a uinitrd file. How can I start from it? Default is zIimage, right? Leonardo

Hi all, I would like to use the PWM1 in order to drive a charge pump, but I am struggling to enable PWM using the DTB on Armbian v23.11. Anyone succeeded in configuring PWMs in H616? Thanks in advance!

Hello, I have problem with "Orange Pi Zero Plus" and functionality of Relay module (electrical circuit= normally closed). Relay module is attached on pin/port number "0". When I set up pin number "0" from "OFF" to "OUT" state with command: gpio export 0 out state is changed from OFF to OUT and parameter in column "V" is "0". It should mean that relay stays turned of. +------+-----+----------+------+---+ | GPIO | wPi | Name | Mode | V | +------+-----+----------+------+---+ | 12 | 0 | SDA.0 | OUT | 0 | Problem is, that relay immediately after execution of mentioned command enables(turns on) output electrical circuit. Relay m…

I am trying to configure my Banana Pi M2 Zero to use UART to communicate with my 3D Printer. I used Armbian config to setup UART 3 (Pins 8 & 10). I can't seem to communicate over the port. How do I test and do I need to make other config changes? Thank you!

hi there, just created the account to report what i experienced with my r1. unfortunately i had a bunch of changes w/o reboot so i only can estimate what caused the gap but im pretty sure it was at least the fact that i changed to the /etc/network/interfaces.r1router cfg before i rebooted from do-release-upgrade to xenial (install image has been the recent trusty of today). that was when i couldnt even ping my banana from any other box in my home net. have to say im with the german telekom which provides ipv6 in a dual stack manor. i saw on the pi console that it got the exspected ipv4, but also ipv6 addresses by telekom speedport dhcp. nevertheless from my other box it l…

I'm testing the nightly image: Armbian_5.32.170704_Nanopineo2_Ubuntu_xenial_dev_4.11.8.img I read somewhere that the NanoPi Neo2 has a shutdown issue where it reboots. This was my experience (serial console) `shutdown -h now` ends with [ OK ] Reached target Shutdown. [ 59.809788] reboot: Power down INFO: PSCI Affinity Map: INFO: AffInst: Level 0, MPID 0x0, State ON INFO: AffInst: Level 0, MPID 0x1, State ON INFO: AffInst: Level 0, MPID 0x2, State ON INFO: AffInst: Level 0, MPID 0x3, State ON Maybe there is a watchdog timer (that resets the CPU if some ticker stops or something) that needs to be disabled? …

Hi all, I am running a lime2 board with trusty as a server. Now I wanted to upgrade to xenial and used the standard Ubuntu way using "do-release-upgrade". Since that failed and resulted in a not booting image I was now wondering if this is the right approach for armbian as well. I was searching the docs but couldn't find what I was looking for. Thanks Chris

Hello, I'm a bit confused about the documentation, to be precise the hardware notes > Allwinner Generic > reconfigure video output part. It lists various options regarding video output. Then it states Now I see, inside boot, a "armbianEnv.txt" and the mentioned "boot.cmd". However, the default boot.cmd doesn't contain a saveenv line. Also, the head of the boot.cmd clearly states Can someone lighten me up on the relationship between the files armbianEnv.txt and boot.cmd, and why I should/shouldn't edit boot.cmd? I'm running the mainline kernel on a Banani Pi Pro, if this is relevant. Thanks in advance

Hi, I followed the following link to create encrypted root. However, every time I boot, i don't see any prompt for password. My armbianEnv.txt is following", but nothing display at "Console" (HDMI) or "Serial" (debug 3 pins next to USB port). ~ Has anyone had any success? I did this for OrangePi Lite 2 (64-bit) H6 and no issue. Thanks

____ _ _ _ _ / ___| _| |__ (_) ___| |_ _ __ _ _ ___| | __ | | | | | | '_ \| |/ _ \ __| '__| | | |/ __| |/ / | |__| |_| | |_) | | __/ |_| | | |_| | (__| < \____\__,_|_.__/|_|\___|\__|_| \__,_|\___|_|\_\ Welcome to ARMBIAN 5.27 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun7i System load: 0.92 Up time: 1 min Memory usage: 4 % of 984Mb IP: 192.168.1.77 CPU temp: 34°C Usage of /: 15% of 7.2G How can I change this logo?

no new kernel offered since 3.4.112 via apt-get update / upgrade

I have installed armbian (4.9.7-sunxi) on my Lamobo R1 but i have a problem: It's possible to use the module ap6210 (like in bananian) for setting wlan0 acting in access point mode ? I don't find the way to do it using rtl8192cu Sorry for my bad english and thank you in advance Luca

Hello On my Banana PI infrared receiver is not detected at bootup. I'm running armbian 4.7 jessie. The only /dev/input device is that of axp20x-pekj, which I undestand to be a power controller. My issue is similar as found in this thread: http://forum.armbian.com/index.php/topic/475-bananapi-r1-no-infrared-device/ Except ofcourse the board is different From the other thread I gather I need to change something in regards to dtb-s, but I guess as the boards are different using the same one as mentioned is not a good idea.

hi i would like to install vlc 2.2.7 or vlc 3 on armbian xenial 5.90 stable two month ago i used to do apt-get upgrade & apt-get update then vlc 2.2.7 can be installed no problem now even apt-get upgrade break the system and i get two instance of desktop now i only get vlc 2.2.2 wich have bugs is there a way to install vlc 2.2.7 at least ? orange pi one

My problem with Cubieboard3: input audio file hallo.mp3 with content "Hallo Otto" play hallo.mp3 --> Output on analog audio clipped to: plop lo otto plop It looks like the audio channel must be switched on and off for use. What can I do?

Good night, I have the sound problem but with hdmi audio, de default is the 3.5 mm audio jack, then I looked for the asound.conf in /etc, then I found that this file doesn't exist and after that I've created it with the following content: pcm.!default { type hw card 1 device 0 } ctl.!default { type hw card 1 } the problem is that even created this way the sound output still being the 3.5 mm jack and I don't know if I need to change some setting to mpv player to output the sound through hdmi. What else can I do to change the sound from audio jack to hdmi?

Help me. Armbian view my USB-HID joy in /deb/bus/usb/xxx/xxx, and my device not work in emulator(nes, sega and etc.) I think that my joystick mast be /dev/input/jsx. I find information, that module "joydev" direct the joystick, but "lsmod" show, that "joydev" is not run. Modules "joydev.ko" and "hiddev" is absent in filesystem.

My Development board is Orange Pi zero plus2 H5. My bluetooth already in work,but I try to play a .wav for test.this circumstance occurs. This is my test wav file: 1045.wav I use : aplay 1045.wav Playing WAVE '1045.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo then I record the sounds as mypaly.mp3. I guess this problem is due to uart Baud rate 115200 is not high enough . How can i fix this? 1045.wav mypaly.mp3

Hi, I use OrangePi PC as my home samba server, as well as dlna server. It works from hdd, since I made a command nand-sata-install. I want to change the disc for a bigger one, how can I do this? If I will make rsync with all hdd will it be enough?

Greetings, can the NAS HAT for the Zero work on the Zero Plus2 H5? I have the Zero HAT, which connects to the Plus2 board, but when I connect a usb keyboard, it does not power it. Although a usb mouse lights up. I can't test the mouse fully because I'm using ubuntu server on the Plus2 which has no GUI. So again, is the problem that the Plus NAS HAT does not work on the Plus2? I see that there is a NAS HAT for the Plus2 with the same connectors that the Plus HAT has but it's smaller. Thanks in advance iomari

anyone know if the onboard mic works in armbian? ive tried using arecord on the default audio device but no output.

Orange Pi Zero 2 After installation Armbian 22.02 Focal stopped loading. help me please in UART outputs the following U-Boot SPL 2021.01-rc4-armbian (Jan 05 2021 - 03:01:27 +0100) DRAM: 1024 MiB

Recently I borrowed my Orange Pi PC2 to a friend, and he fails to set up SSH connection w/ it. After debugging w/ HDMI monitor, I found ssh_host_ecdsa_key, ssh_host_ed25519_key and ssh_host_rsa_key are preloaded to the Orange Pi PC2 image, which prevented SSH from working. Even if it doesn't prevent working of SSHD, it's also a severe security hole -- that means all Armbian installation with the same image will uses the same host key and they're vulnerable to MITM attack. I think these files should be purged when generating image, and regenerated when first powerup. It's what AOSC OS images do.

Armbianmonitor: http://ix.io/3UHS Hi all After update kernel from 5.10.60 to 5.15 or 5.16 on my Orange PI PC+ MJPEG-Streamer throws: Quote libv4l2: error turning on stream: Cannot allocate memory motion throws: Quote [1:ml1] [ERR] [VID] v4l2_set_mmap: Error starting stream. VIDIOC_STREAMON: Cannot allocate memory I tried to decrease resolution - even 320x240 not helps. Rolling back to 5.10.60 helps, but it's not very sustainable solution. Are there any known solution for 5.15-5.16? Today checked kernel 5.15.43-sunxi and 5.17.11-sunxi - same issue baal@3dprinter:~$ mjpg_st…

Hi. I am trying to perform pairing with the Bluetooth Low Energy device using the bluepy library. This library uses the MGMT for ble. The command 0x0019 (MGMT_OP_PAIR_DEVICE) returns success status (0x00). But using the sniffer I didn't found pairing request packet. Then I tried to perform pairing using btmgmt tool with the same result (not paired, but success is returned). Then I tried to use Bluetooth manager. User interface added the device and pairing returned success. But during the pairing my device wasn't indicate successful pairing. I still can't to read characteristics with no mitm protection. Which means that device is not paired. …

dear igor .. see #63 https://github.com/igorpecovnik/lib/issues/63

I've installed Armbian 23.11.1 Bookworm on a FriendlyElec ZeroPi. On the cmdline the linux command who gives the following output: dgs pts/1 1011643795265722162 (172.20.10.14) Usually it should be (as on a Debian Bookworm distribution): dgs pts/0 2023-12-14 10:43 (172.20.10.14) Instead of showing date and time the Armbian who command outputs this long integer number. Why? Is this a bug or do I miss any configuration? PS: the locale settings is identical on both devices, date shows on both devices the correct time.

Hy, Someone could say me if PPP is in the Kernel natively? Thanks

Hello, when I shutdown or reboot my cubietruck nothing happens. Just the green LED flashes 2 times, pause, flashes 2 times again, pause, and so on. Here is the link to my System diagnostic information: http://ix.io/1bcg Best regards

Hi, for all my automation projects I use BananaPi and BananaPro. As far as I know the difference is the script.bin file. Is this right? I will not maintain two Images. Right now I use the Image for the BananaPro 5.14. I changed the sym-link to BananaPi.bin. But the hardware-info after login shows "BananaPi Pro". Is there anything more I have to do? Thanks. Steffen

After few hours wlan0 lost connection for unknown reason (reason=0) and then it looks like some kernel module crash. Is it driver problem? Any suggestion will be very appreciated! Dec 31 19:22:05 tns_3np wpa_supplicant[1097]: wlan0: CTRL-EVENT-DISCONNECTED bssid=40:b0:76:58:52:d8 reason=0 locally_generated=1 Dec 31 19:22:05 tns_3np wpa_supplicant[1097]: p2p-dev-wlan0: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD Dec 31 19:22:05 tns_3np wpa_supplicant[1097]: p2p-dev-wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=CZ Dec 31 19:22:05 tns_3np NetworkManager[812]: <info> [1577816525.4151] device (wlan0): supplicant interface …

Hi! I have a small question, i installed Armbian version 5.20 (kernel 4.7.3) and upgrade all package with apt-get upgrade. In this case armbian upgraded to version 5.23 with kernel 4.8. I must have kernel in version 4.7 so my question is - how to downgrade all armbian package to previous release (5.20)? Thanks for help

Hello fellas, I would like to borrow your experience to compete with my task which counts (and measures) pulses on GPIO with Orange Pi zero. Currently, my simple solution is to register a callback to a specific edge and increment a global variable. I would like to catch a few hundreds of pulses in one burst which have in a 5-100 us length. However, even the number of counted pulses is not okay. Some of them are missed sometimes, which leads to an unreliable solution. I used different libs and all of them fall into the same issue. I tried the following libs: * ArmbianIO (C) * ArmbianIO (Python: origina…

Hello armbian forum, I have an Orange PI Win plus with armbian desktop legacy kernel 3.10.y on it. I also have a extension board from my Raspberry 1 which I want to use. The Problem is that the extension board needs the pins 8 & 10 for UART communication. I read already that UART(2) over pin 8 & 10 is used for Bluetooth? I don't need Bluetooth and want to disable it to free up the pins. Uart1 Pin 38 & 40 and Uart3 Pin 11 & 13 are working finde. How can I make this? With overlays or editing the .dts files?

I've noticed some other threads about Banana Pi builds not booting. I tried the 6.12v built on Jun 19 and that's when my device stopped booting. It won't even power on. I suspect the firmware update is corrupting the MicroSD card. I originally had an older build running and ran an update/upgrade and my system wouldn't boot (won't power on) after that. I purchased a new MicroSD card, and my system booted with an older build. Not realizing my MicroSD would get corrupted, I tried updating/upgrading again and I'm back to not booting. I don't have enough MicroSD cards to pinpoint the exact package. My working build is from 6.6.17, 24.5.0-trunk.58. It appear…

Alright so I am trying to use this OLED display: https://www.amazon.com/AITRIP-Display-SSD1306-3-3V-5V-Arduino/dp/B08JPYJ35Y?th=1 with Armbian(minimal) on my orange pi zero 2w, but I just cant get the i2c1 bus to detect it. Here's some more details: uname -r returns: 6.12.23-current-sunxi64 cat /boot/armbianEnv.txt returns: verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h616 rootdev=UUID=adb61282-df86-4116-9688-e94c56913687 rootfstype=ext4 overlays=i2c0-pi i2c1-pi param_i2c1_pin_sda=3 param_i2c1_pin_scl=5 user_overlays= usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u sudo i…

hello, Exist a way to install armbian on my A13-OLinuXino-WIFI ? Best Regards

I've gotten the board up and running and on Wifi, but this is supposed to be a dim wifi 'lamp'. Just to start out: how do I connect the +- to the board How do I tell the board to power on the leds And for more advanced: Is it possibly to do voltage-limiting dimming as opposed to PWM If no: what's the best way to do PWM? (I'm perfectly fine with creating a c program that simply turns it on and off at a specified hz, but there may be a more elegant tool I'm not aware of) Thanks

Hi, yesterday I used the latest mainline built (https://dl.armbian.com/lime2/Debian_jessie_next.7z) on Olimex Lime2-emmc 4 GB but i can not access the eMMC. I only tested once with the latest mainline built. I have read other old topics about patching uboot but I wonder if I really need to patch uboot or if this a problem (bug?) with the latest built. Is there any .deb file available with the patched uboot? Thank you

Hello First, sorry for my English Second, the problem... I have an Orange PI Zero 3, 4gb I install the OS without any problem, the image I use is the following: "Armbian_23.08.0-trunk_Orangepizero3_bookworm_current_6.1.31-1GB-2GB.img" I configure the network with the program "nmtui", everything is fine. I enter through ssh since the screen is not detected through HDMI, I do an apt update and then apt upgrade... everything seems correct, until I do a reboot... my Orange Pi does not start anymore. I am interested in installing openmediavault, that is why I resort to a debian image. What is the problem? I am not using the correct image? I need your help

I am trying to enable Winstar TFT display on Olimex Lime2 board under the kernel 5.4. Display spec is here: https://www.winstar.com.tw/products/tft-lcd/ips-tft/lvds-tft.html Up to the day we've been using the legacy kernel 3.4 and the display worked fine -- the u-boot was compiled with the settings (CONFIG_VIDEO_LCD_MODE, CONFIG_VIDEO_LCD_POWER etc) suggested here: When I try to use the same settings in the mainline sources of armbian, the display does not work. I've enabled backlight with a DTS overlay and the backlight works but the display stays blank. Here is the output of dmesg: [ 2.846134] printk…

I would like to set a GPIO to output-high during the boot. In this case, the GPIO is PG0 whose number is 192. The device tree overlay is /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-a64"; fragment@0 { target = <&pio>; __overlay__ { gpio_out_override_hog { gpio-hog; gpios = <192 0>; /* PG0 */ output-high; line-name = "PG0-gpio-hog"; }; }; }; }; However, after the application and reboot, I do not see any init information in "/sys/kernel/gpio" about GPIO 192. There is no "/sys/class/gpio/gpio192" folder existed after boot either. Is there anything wrong in the overlay file?

Hello. I have a problem on my Orange PiPC+ board. After playing mp3 file, I hear some sound click. As I understand, snd driver goes to the power save mode. I tried to disable it. I set snd-soc-core.pmdown_time=-1 It did not work for me. How can I fix it? Additional information: clock@orangepipcplus:~$ uname -a Linux orangepipcplus 4.19.62-sunxi #5.92 SMP Wed Jul 31 22:07:23 CEST 2019 armv7l armv7l armv7l GNU/Linux clock@orangepipcplus:~$ sudo armbianmonitor -u System diagnosis information will now be uploaded to Please post the URL in the forum where you've been asked for. I don't see…

Hi, I guess this question depends on knowing the OPi Lite hardware reset button capabilities before being able to answer the following question. but here goes: Does anyone know if the OPi Lite button can be scripted/coded to not only execute a shutdown or reboot command but to do both? So, say, a single short press would gracefully reboot the OS while a long press (hold for, say, 4 seconds) would perform a shutdown? Thanks!

Hello to all! I'm using orange Pi pc with Armbian Xenial desktop legacy kernel 3.4.113-sun8i and i'm not able to configure mpv to play correct .avi videos. Like suggest in some old posts if try vo=vdpau video works but immages are very distorted (big pixel and strange color), instead if i use vo=x11 immages are ok but video plays very slow. With vo=vx MPV dont start. Has been found a solution?

Hi, is it possible to use the OTG as a mass storage device? Would it be possible to use an iso or harddrive image as "mass storage" device?

Hello, I am experimenting with Orange Pi Zero and so I set different resolution with h3disp. Now TV connection via pin 9 is not working anymore. Any idea please how to reset to default setting? I tried many settings with SSH but it did not reenable my pin 9. Help is much appreciated.

Hi, I thought I'd share this in case anyone else is in the same situation as I. I've been trying to get my Orange Pi Lite to boot the latest (Aug 26 2021) images. I've tried Focal, Bullseye and Hirsute, and the Lite doesn't seem to care for any of them. "Armbian_21.02.1_Orangepilite_buster_current_5.10.12_desktop" from the Archive section does boot, as do the versions of Ubuntu and Debian from the Orange Pi website. Perhaps if I had a serial terminal connected I would be able to troubleshoot this, but I don't yet. I'm using a Sandisk Ultra A1 64Gb and I'm monitoring my power supply with my oscilloscope and haven't noticed any dips belo…

Hello everyone, This is my first post to this forum. I am installing a software package on Armbian 5.60 stable Debian GNU/Linux 9 (stretch) 4.14.70-sunxi for the Banana Pi M2+ and I have problem with the uname command in that when I pass the -i option it reports back unknown. Now I am unsure what function the software calls to determine the platform architecture so I cannot script around it, but this issue is preventing me from moving forward now. When I check some of the binaries with file command it reports back ELF 32-bit LSB shared object, ARM, EABI5. Anyway this causes the software I am installing to fail, any suggestions as to how to fix …

Hi guys, I searched for an answer but couldn't find a working one. Most answers from 2017 and it's not possible to answer there. Could someone please explain how to use the wifi and bluetooth module on Armbian 20.08.7 Bionic with Linux 5.8.13-sunxi (minimal without desktop)? ____ ____ _ __ __ ____ | __ )| _ \(_) | \/ |___ \ _ | _ \| |_) | | | |\/| | __) || |_ | |_) | __/| | | | | |/ __/_ _| |____/|_| |_| |_| |_|_____||_| Welcome to Armbian 20.08.7 Bionic with Linux 5.8.13-sunxi System load: 2% Up time: 35 min Memory usage: 8% of 998M IP:…

NanoPi NEO2 Debian jessie 4.11.1-sun50iw2 mount.cifs doesn't load if iocharset=utf8

Hello, in my installation all works fine and smooth. But after tryout of exagear (install and purge) my soundcard is not available any more (SPDIF). MPD/MPC is working well, but not sound out. apt shows a up-to-date system. aplay -L shows only pulseaudio server. lsmod : see my attached file lsmod.out. Any idea to bring sound back without any reinstallation? Thanks for for any idea to solve my problem Best regards, Martin

1.Only OpenGL ES2.1 and 1.x work: chenyifei@orangepi3:~$ glxinfo|grep OpenGL OpenGL vendor string: Panfrost OpenGL renderer string: Mali T720 (Panfrost) OpenGL version string: 2.1 Mesa 20.2.0-devel OpenGL shading language version string: 1.20 OpenGL extensions: OpenGL ES profile version string: OpenGL ES 2.0 Mesa 20.2.0-devel OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.0.16 2.glx did't work with panfrost dri: chenyifei@orangepi3:~$ cat /var/log/Xorg.0.log|grep GL [ 10447.384] (II) Initializing extension GLX [ 10447.384] (EE) AIGLX error: sun4i-drm does not export required DRI extension [ 10447.395] (II) IGLX: Load…

Hi, I can only find legacy images on the website. Is there a place to get mainline images so I can test docker? Thanks in advance. Regards, Michal

Hi, I have a problem while taping the following command : root@orangepizeroplus2:~# cat /dev/ttyS2 cat: /dev/ttyS2: Input/output error root@orangepizeroplus2:~# cat /dev/ttyS1 cat: /dev/ttyS1: Input/output error root@orangepizeroplus2:~# cat /dev/ttyS3 cat: /dev/ttyS3: Input/output error root@orangepizeroplus2:~# cat /dev/ttyS0 ^C root@orangepizeroplus2:~# Is there a way to activate those devices? (I know that we can enable them using "script.fex" file with OP H3 but I don't know how to do it with mainline kernel H5) Please check the boot logs of the board here : http://sprunge.us/dCLS Please any help would be appreciated !!

Hello I have problem with UART after some random time i have got serial8250_interrupt with dmesg log. After that my software reading/writing is broken from UART. [88124.598598] irq 42: nobody cared (try booting with the "irqpoll" option) [88124.598617] CPU: 0 PID: 10713 Comm: sas-statistics- Not tainted 5.3.7-sunxi #5.99.191031 [88124.598620] Hardware name: Allwinner sun8i Family [88124.598657] [<c010d751>] (unwind_backtrace) from [<c010a32d>] (show_stack+0x11/0x14) [88124.598674] [<c010a32d>] (show_stack) from [<c0923da9>] (dump_stack+0x69/0x78) [88124.598689] [<c0923da9>] (dump_stack) from [<c0164135>] (__report_bad_ir…

I'm trying to establish usb serial communication between an Orange Pi PC2 H5 running armbian and a samsung galaxy note 4. I'm configuring the micro USB port on the Orange Pi with libcomposite and opening up an acm port. On the android end I'm using a library by mik3y (https://github.com/mik3y/usb-serial-for-android) to establish the communication. The trouble that I'm running into getting Android drivers to support USB serial communication with the H5. I may just be just configuring the orange pi wrong. Here is the libcomposite setup script: #!/bin/bash/ modprobe libcomposite cd /sys/kernel/config/usb_gadget/ mkdir -p g1 cd g1 echo 0xa4ac > idProd…

Dear All, I try to use the UART3 on my Orange Pi mini but it just won't work. I put a jumper on Pin 8 and pin 10 on the header. Also give read/write premmission to all users. Based on this UART3 is /dev/ttyS2 [ 0.000000] console [tty1] enabled [ 0.954713] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A [ 0.985810] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A [ 1.016890] sunxi-uart.3: ttyS2 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A [ 1.047968] sunxi-uart.7: ttyS3 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A [ 6.014770] systemd[1]: Expecting device dev-ttySAC2.device... [ 6.681738] systemd[…

Hi, I would like to make my opi plus in AP mode (standalone). I know the img is shipped with hostapd and interface.hostapd ready but is in bridge mode. I am able to use it in bridge mode but i need it to be standalone. How can i set it to just standalone? I tried install dnsmasq and disable the br0 but i think i did something wrong and the board cant be connected. Cheers

Hello, I use the NanoPi Neo (4.19.38-sunxi, Armbian #5.85 ) to pool an external device over /dev/ttyS1 serial port. At flashing moment of the external device, I should switch pins of ttyS1 to input mode by using bash commands #!/bin/bash firmware=`ls update_*.hex` echo "198" > /sys/class/gpio/export echo "199" > /sys/class/gpio/export echo "in" > /sys/class/gpio/gpio198/direction echo "in" > /sys/class/gpio/gpio199/direction # device update flash -P linuxgpio -b 40000 $firmware echo "198" > /sys/class/gpio/unexport echo "199" > /sys/class/gpio/unexport Is it possible to change up the mode of pins to the alternate function (ALT5) without the r…

I use Mainline 4.9.7 Ubuntu Xenial and wan`t to disable wlan and bluetooth, cause i don`t need. Where can i do this?

Hi: Trusty ubuntu is workig great on my CT. It boots into /root and uses this as Home. I set up a new user in /home/armbian and now I would like to boot into this user. I installed lightdm but the system still boots into /root and does not show a log in screen after boot. How can I fix that? Thanx in advance BTW: $ aplay speker-test works after boot. When I run youtube in root video is working fine. Sound comes up only for a fraction of a second and then mutes. After that aplay is also not working any more. Any clou?

I'm using flir's usb 3.1 camera with OrangiPi 3. default value for usbfs_memory (/sys/module/usbcore/parameters/usbfs_memory_mb) is 16. I should change it to a 1000 to be able to use full size image acquiring. testing this number, the higher I set it the higher image size I can get until 256mb. above 256, max image size is aprox 3200x2736 pixels (I need 5472x3648). so I guess somewhere in usbcore / kernel there is additional limit. Liad

hi there, Recently there was an update for all Olimex boards with A20. Now we have one image for all the boards and it includes mainline kernel which is cool. I checked here and took the image from here. Now after a while I got strange error and wanted to check with you if you can share an opinion what this could be: [32673.051479] Unable to handle kernel NULL pointer dereference at virtual address 0000 [32673.060027] pgd = 9d6652ac [32673.062884] [00000000] *pgd=00000000 [32673.066666] Internal error: Oops: 5 [#1] SMP THUMB2 [32673.071795] Modules linked in: joydev input_leds ipt_MASQUERADE nf_conntrack_netlink iptable_nat nf_nat_ipv4 xt_addrt…

I'm trying to make working 3.5" 320*480 TFT SPI display with touch screen on NanoPi K1 Plus with Armbian 20.05.2 (kernel 5.4.43). For now it works, but the touchscreen has issues. In empty `startx` session cursor works for few minutes and then hangs, restarting `startx` make it working again for a while. If I try to run x session with chrome, the cursor hangs immediately. openbox-session & chromium --no-first-run --disable --disable-translate --disable-infobars --disable-suggestions-service --disable-save-password-bubble --start-maximized --kiosk --disable-session-crashed-bubble Any ideas how to fix it? Screen image Sp…

Now I use Orange Pi PC+ with Armbian_5.32.170629_Orangepipcplus_Ubuntu_xenial_dev_4.11.7.img , on sd card it work fine but when I use EMMC , wifi cannot auto connect what should I do ? (I use nmtui.)

Hello, I have done my iso with script yersterday and when I start the Orange Pi Plus 2 the yellow led appear but nothing else doing ... Why ?

Hi everyone, I have the OV5640 game ver1 image sensor with ARMBIAN 5.75 stable Debian GNU/Linux 9 (stretch) 4.19.20-sunxi64. Why does the kernel 4.19.* not support the OV5640 driver? How can I add this driver manually to the kernel? I noticed that the Orange Pi Zero Plus2 H3 kernel has OV5640 driver.

I had got a OrangePI One Plus (H6) on a few day ago. I had a problem with HDMI to VGA Converter that it do not work with my OrangePI One Plus. I guess it maybe about the Power of that HDMI on OrangePI One Plus was not enough for HDMI to VGA Converter's operation. Then I fix it by replace regular HDMI to VGA to be HDMI to VGA with 5V external port. And Yeah, it's work fine!!! but I had OrangePI One (H3), OrangePI PC2(H5) and OrangePI Prime(A64) too which All of them had no problem with HDMI to VGA Converter. I feel wonder with this problem on OrangePI One Plus.

Machine model: Banana Pi M2 Berry Linux bpi08 6.2.7-sunxi #3 SMP Fri Mar 17 07:58:04 UTC 2023 armv7l GNU/Linux (armbian@next) Mir ist es nicht möglich eine interne Temperatur auszulesen. Brauche dringend Hilfe! Der Link“/etc/armbianmonitor/datasources/soctemp “ exitiert zwar, nur die Datei / das Verzeichnis existiert nicht: nicht vorhanden → /sys/devices/virtual/thermal/thermal_zone0/temp nicht vorhanden → /sys/class/thermal/thermal_zone1/temp Wo soll diese Dateien überhaupt erstellt werden? Anmerkung Es wäre schön, wenn es für den Banana Pi M2 Berry eigene Tags geben würde. Er unterscheidet sich von dem Banana Pi M2+.

hello , I have Opi lite 2 I want to use it as low load server with minimal power consumption (min temp) I edited /etc/default/cpufrequtils like that min_speed=120000 max_speed=480000 governor=ondemand but it works on 888mhz constantly with load and without load (image 2) Ps: I have also OPi PC+ and edit of cpufrequtils works ok on it (image 1) what am I do wrong, or maybe armbian-config monitor doesn't work properly ? ARMBIAN 5.67.181202 nightly Ubuntu 18.04.1 LTS 4.19.4-sunxi64

Hello guys, I am new to this forum and this is my first thread. I bought a Nanopi M1 and try to play with the GPIO. I follow all the official instruction and install MatrixGPIO-python However, after the installing, I would like to test the GPIO with script that come with the Git Clone The terminal shows me this response "Fail to set gpio direction" Does anyone know how to solve this problem? Thank you

The module ds2490 seem to be missing in the new release. Should be: /lib/modules/4.19.62-sunxi/kernel/drivers/w1/slaves/w1_ds2490.ko

In download section for X2 Beelink there is no image for Server stretch test as advertised on download page, only for desktop. Is it normal ? (tm)

Hi, who knows how to fix the problem of the displaced screen on the right? This is how Armbian appears with the latest build https://dl.armbian.com/orangepi3/nightly/Armbian_5.90.190705_Orangepi3_Ubuntu_bionic_dev_5.1.15.7z and this is how it appears to me with an old build with kernel 5.0.7, so it's not the monitor's fault Regards

Hello. In my project, I want to use a linphone with support for the h264 codec. In repositories there is a version of linphone but without the specified codec. I tried to build a linphone from the source code, but failed. The matter is that the assembly of the dependent package belle-sip hangs (the assembly lasted 2 days). Tell me, does anyone have any experience in successfully building a linphone from git? Now I'm trying to build a linphone on the Orange Pi zero plus 2 H3 board.

Hi Dear Friends I have Sunvell R69 New version with Ram2 G Official Frimware IS android IS 10 I tested H3-R69-MXQ-S-MXQ4K-8PD3-1.1.4 This frimware Wifi and Sound Not Working Tested T3CH-ASSIS_H3_Stock Rom R69-H3-Allwinner_T3CH-ASSIS All Rom Wifi and Sound Not Working Any Fimware For Share With me ??? To fix this Problem ???? please Help ?

Hello, JiveLite would be nice for LMS-installation with Touchscreen/Display. http://forums.slimdevices.com/showthread.php?98156-Announce-JiveLite-cut-down-squeezebox-control-application Has anyone of you ever successfully compiled JiveLite? TIA Jochen P.s.: With a little help from google translator. Edit: Well, I did it!

Hello, i have cubieboard2. This board boots and runs successfully with Armbian-5.xx-Cubieboard-Debian(Ubuntu)-xx-4.xx.xx image, but i have NO success to boot and run any Armbian_5.xx_Cubieboard2_Ubuntu_xenial_default_3.4.xxx_desktop.img image. Except, that i was able to boot and run Armbian_5.38_Cubieboard2_Ubuntu_xenial_default_3.4.113 image once and it worked for few hours, i was able to install some SW. After power up in the morning cb2 boots until kernel starts, show some flickering colorfull screen and in a second red power led is off and board is not showing any progress. HDMI display says no signal. Maybe someone has the same problem ? So to make it s…

In the context of this topic, after removing network-manager and configuring the network "the old way", via /etc/network/interfaces, what is the proper way to make sure that the WiFi radio is not emitting? I plan to place my OPi Zero next to the router (wired connection) and I want to make sure there's no unneeded radio interference. My /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp

Hi! I was using armbian 5.60 with 4.14.70 kernel and WiFi AP worked flawsessly. Today I had to rebuild my sd card, so I downloaded the latest available build Armbian Stretch mainline kernel 4.19.y I can connect to WiFi from the board, also able to setup a WiFi AP on the board. But when I try to connect to the new AP I see the following message in terminal and the connecting device fails after several seconds: Message from syslogd@localhost at Jan 17 18:20:38 ... kernel:[ 349.842020] Internal error: Oops: 96000004 [#1] SMP Message from syslogd@localhost at Jan 17 18:20:38 ... kernel:[ 350.021242] Process RTW_CMD_THREAD (pid: 607, stack limit = 0x0000000…

Hi, Does anyone here is familiar using verified boot? Any one who already implemented in in any A20 boards? Thanks in advance.

Hi, After running nand-sata-install at the step "eMMC install: Formating /dev/mmcblk1 to ext4 ... please wait:" mount: wrong fs type, bad option, bad superblock on /dev/mmcblk1p1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so. dmesg: [ 72.516530] EXT4-fs (mmcblk1p1): Unrecognized mount option "flush" or missing value [ 73.928286] EXT4-fs (mmcblk1p1): Unrecognized mount option "flush" or missing value [ 74.238966] EXT4-fs (mmcblk1p1): Unrecognized mount option "flush" or missing value [ 74.822857] +mmc_blk_issue_discard_rq,1809 [ 74.822921] mmc2:mmc…

SND_USB_AUDIO seems now disabled in Vanilla Kernel. Probably after this commit: - https://github.com/igorpecovnik/lib/commit/70231cf8ae641650ec8601124db33b5b186a285b This should be why my USB dac doesn't work anymore after an update of the system. Is there any reason or it's only an error? I must thank you Igor for your work.

Hello, First of all, I did check/tried anything i could find on similar issues, for similar SBCs Main issue: only 2/4 USB ports are powered, but they don't recognize any device (keyboard, mouse, memory stick), although, if i plug in an USB hub, it lights up. I also tried an Android and and an Ubuntu LXDE, same problem. What bothers me is that mouse and keyboard worked with the original Android that came pre-installed on the board. Config: - Orange Pi plus 2E (the one with 4 USB ports) + heat sink + HDMI to VGA converter Power source: I tried 4 so far, currently using a PSU of 5.15 V and 4 Amps, through the DC input, jack ba…

i run a cubietruck on armbian with 4.6.2 kernel. it starts with the software on mmcblk0p1 (with kernel 4.6.2 and the /lib dir on the sd) but uses as root a partition of the ssd. when i upgrade now, i see that the upgrade process produces a new initrd.img-4.6.3 and removes the old 4.6.2. (diagnosis: the system runs, but the keyboard/mouse connected to the usb is not functional - desktop over net works!) i assume that there is something wrong with the boot.cmd - but i do not see exactly how to fix it. the upgrade process uses the ssd .../lib directory and removes 4.6.2 there. if i would mount the /boot directory with the running system (in fstab) - would this hel…

OK

I have an Orange Pi Plus 2 that was running Armbian off of its onboard eMMC module, but I think I may have damaged it while working with the GPIO pins as it now will no longer boot from the module. The board will boot and run OK off of an SD card, but I'd like to copy the OS back to the eMMC module if possible. I've tried to rerun the script 'nand-sata-install', but I receive the error 'There are no targets. Please check your drives'. If I list the mmc devices I just get one, which I presume is the SD card: > ls -l /dev/ | grep mmcblk brw-rw---- 1 root disk 179, 0 Mar 20 16:51 mmcblk0 brw-rw---- 1 root disk 1…

Hi, There is a fresh new install. armbian-config fails with a message "There are no targets. Please check your drives". BOARD=nanopineo BOARD_NAME="NanoPi Neo" BOARDFAMILY=sun8i VERSION=5.65 LINUXFAMILY=sunxi BRANCH=next ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage System diagnosis http://ix.io/1sm3

Dear all, I am not able to find and enable SPI in orange pi zero+ (allwinner H5).I did as per many suggestion on many forum but didn't work and not showing active. Please give me concrete help.

Hello, bit of a strange one here. Using Armbian 21.02.3 Bionic with Linux 5.10.21-sunxi on a NanoPi Neo Core. Using nmtui to set a static IP on the Ethernet interface and all is good. On reboot, a second interface is added (dhcp) and the static interface disabled. Any help at keeping a static IP that survives a restart would be very much appreciated, Cheers Rob

I should install desktop release on my H3 (OPI PC), not server. after WIKI search, apt-get install xfce4 libmali-sunxi-r3p0 lightdm libvdpau-sunxi1 xorg xserver-xorg-video-fbturbo mpv some other apt-get not listed. I get XFCE runs on H3. and get video hwdec enabled. and some modify on asound.conf get HDMI audio works. /etc/asound.conf pcm.!default { type hw card 1 } ctl.!default { type hw card 1 } ---- with continue dig, I find I need to modify boot.cmd enable memory reservations to make it better. so the boot.cmd: setenv bootargs "console=ttyS0,115200 console=tty1 root=/dev…

Hi, I'm trying to interface a USB module via the usb pins (USB-DM2 and USB-DP2 - Pin 3 and 4 on the 13-pin header) and powered by the 5V and GND pin (Pin 1 and 2 on the 13-pin header) on the Orange Pi Zero board. During startup/reboot of the Orange Pi Zero, the module fails to get recognised and come up( output of lsusb and dmesg do not show any usb devices). The module, however gets recognised and works fine when plugged out and back in. Are there any extra steps that I have to take in order to make the module get recognised during bootup? Any help regarding the matter would be appreciated. Thanks in advance!

I there im using orange pi zero for homeassisatnt and google assisatant since my card died i install this new version configured every thing but audio isn´t working! I fallowed this guide like before but no audio coming for my orange pi zer no recording either! I have activated analog audio I already have everything configured with homeassistant i don´t wanna configure all again! Can you please help me make audio work in this kernel or is impossible to do?