Allwinner sunxi

hello Armbians, Since over an year I try to use this useless Board. Now i want too switch 3 Relays modules with the gpio system, after an udp command. I installed Wiring pi , gpio readall work gpio write 25 1 , works to the inputt get the value 1 gpio mode 25 out, does not work echo 36 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio36/direction echo 101 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio101/direction the input is without an error but with gpio readall nothing changes this code I wrote to use the gpio with python export38…

I bought an OPi Zero, the extension board, a 1/8-to-rca audio/video cable to plug into the AV jack of the extension board, and a 16 GB SDHC card. Loaded Armbian Stretch onto it, plugged in ethernet without any of the AV stuff just to start. The Pi doesn't even show up on my router settings so I cannot access it via Putty or any other SSH program. I turn it off, attach the extension board and av cable, and plug it into the TV in the hopes that I can start working on something with a USB keyboard...nothing shows up on the TV. I'm hoping that's a software issue and not an issue with the actual extension board I bought. I know for a fact it's loading Armbian because I can act…

Enable in armbian-config USB and this no detect USB OTG and additional USB host on the board no working any usb device (microphone, usb storage, keyboard, etc.) that connects detects it Any help you can give me

hello guys ! Today I have installed the armbian 5_20 desktop on my orange pi plus 2 Nice ! The network is working by setting the /etc/network/interfaces The lan0 is connected to the router by using a static IP address The wlan0 is also setted with a statis IP address The update & upgrade operations are done . Now I want to start an access point and I have tryied with the last configuration I used with armbian 5_10 but it doesn't work I have wi-fi module built-in and antenna . I think that many things are changed with tihs armbian 5_20 Does someone know which files to manipulate and how to start an access point ? Thanks and happy new year !!!

Hi, I've been running the OMV7 latest with the armbian headless latest. I've set the power button for powering the system off in the OMV's gui. When the system is "on" I can power the system down by short press on the power button, the system powers off after aprox 10 seconds (so hopefully a clean shut down), the power led and network led get off, but the USB HDD (external 2.5in 320GB WD) still shows activity after power down - the activity led on it blinks (like 5 blinks per second) and I can hear a light clicking in aprox 1sec intervals. The disk does not spin, however (I cannot hear the spinning). I've been using a battery backup (3.7V lion) wired to the BPi M1 bo…

I am using GPIO(CON3) pins 8 and 10 for a project. In BPI M1+, functions for those pins are PH0 and PH1 respectively. https://bananapi.gitbooks.io/bpi-m1-bpi-m1-plus-/content/en/bpi-m1+_gpio_pin_define.html But, when I added overlays=uart3 ,I didn't work properly . When I checked the overlay file sun7i-a20-uart3.dtbo , by changing it to .dts , I figured out that this overlay file uses PG6,PG7 pins, not PH0,PH1 pins. So, to modify the configurations without adding uart3 overlay in the /boot/armbianEnv.txt file, I wanted to edit the /boot/dtb/sun7i-a20-bananapi-m1-plus.dtb file. When I check the file, there are uart3_pins_a option and uart3_pins …

Hi everyone, I am using Armbian. SPI overlay and "spidev" are already loaded "[ 2.614185] spi spi0.1: spi_setup / gpio_is_valid(21) ... doing gpio_request ... [ 2.614213] spi spi0.1: spi_setup / gpio_direction_output(21) done ! [ 7.256451] spidev spi0.1: probing from DT " Did someone succesfully used SPI on this board using WiringPi, WiringPISPI? I have an application that returns me "Unable to open SPI device: No such file or directory". I do have ls /dev/spidev0.1 I tried different libraries for WiringPi but no success. It seems that the library tries to load another module instead "spidev" that is already loaded in linu…

Hi, I have 3 Orange Pi Zero running with the same sd image. It's all working fine, but yesterday I added a fourth device, which for some reason took a MAC address that is the same of another device, causing issues on the connection for both of them. I'm using the mainline kernel ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi. Searching on the internet, I found someone saying that mac addresses for Orange Pis are randomly generated every time the device reboots, but in my case the taken MAC address is always the same for every device. I saw to that people suggested to check the content of the /etc/modprobe.d/8189fs.conf f…

Hi everyone, I'd like to ask and confirm: is there any working HDMI method with proper resolution currently for the Pi+2E, as of 5.59? I'm asking because I have tried next, I have tried dev, and I have tried the legacy kernel. None of them gave any satisfactory result at all. Mainline Kernel 4.14 -- There is HDMI graphics, but the resolution is stuck to no more than 1024x768. I read many times that this is the case when the HDMI was not detected. Kernel 4.18 -- Same thing as for 4.14. Though, as far as I know, the 4.17 should have support for HDMI. Has HDMI for H3 really landed in 4.17, or have I read wrong all over the place? …

Hello! Could you please help me to recover my sd card on Cubietruck? 1. i've made dd copy from my sd card without options. 2. I was delete(mistake) some files from /boot. Dont ask me why.... 3. I was use the same sd card from clean new system from same board. 4. system started, but it clean - without soft. And sda1 (hard disk) have all information before crash. Question - how to repair my system -=))) please.

Hello all ! I connected relle to pins (Physical): Relle Orange in 35 gnd 6 ucc 2 But it is constantly active (on), although the port status 32 is off (0). Why is that? # gpio write 24 1 Changes the port status, but has no effect on the relay. Relle ist ON alweys! If you physically disable the pin (in - 35), then the relay is turned off. I just installed the system. I did not install any additional services and packages. Maybe I need to configure something in the system to activate the GPIO?

Hi! Cubieboard a20 on boot for new armbian`s dont blink led`s I dont know sucessful load or not! On Cubieboard a10 one led blinking!

Hi, i use orangepi lite with armbian buster and kernel 5.4.35 my journal flooding with messages: May 02 09:50:11 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 30 May 02 09:50:13 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 31 May 02 09:50:15 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 32 May 02 09:50:17 orali kernel: RTL871X: adaptive_early_32k(): bcn_cnt = 101 May 02 09:50:17 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 31 May 02 09:50:19 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 32 May 02 09:50:21 orali kern…

Hi there, I am trying to build a voice assistant using OrangePiPc. This is not orangepi zero, but I am posting it here, because there is no subthread for orangepipc. OrangePiPc has an embedded microphone, but for some reason it doesn't work. When I run arecord, I get an input/output error. Any ideas? Here is a board description: http://www.orangepi.org/orangepiwiki/index.php/Orange_Pi_PC arecord -l card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 [CDC PCM Codec-0] Subdevices: 1/1 Subdevice #0: subdevice #0 root@orangepipc:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Codec [H3 Audio Codec], device 0: CDC PCM Cod…

Nanopi neo air stucks on "Starting kernel..." after some random power losses (2-50) during loading I think it's because of corruption of armbianEnv.txt. Normal UART logs: UART Logs with stucking on "Starting kernel" U-Boot SPL 2024.01_armbian-202ns16550_serial serial@1c28000: p024.01-S866c-P7738-Hadc5-Vefe9-B2eb2-R448a (Feb 06 2026 - 03:49:45 +0000) Allwinner Technology 0) Model: FriendlyARM NanoPi NEent from FAT... Unable to use mmc 1:1... ial Err: serial Net: No ethernet found. starting USB... No working controllers found 1(part 0) is current device Scacr 5475 bytes read in 2 ms (2.6 MiB/s) ## Executing script at 43100000 U-boot loaded from eMMC or s…

Apt lists Armbian 23.8.3 as upgradable but refuses to upgrade. According to apt-cache the base files for 23.8.3 have not been updated for Orangepi3-lts. Is this the case or do I have a local problem with my install? --------------- # apt-cache policy base-files base-files: Installed: 23.8.1-bullseye Candidate: 23.8.1-bullseye Version table: *** 23.8.1-bullseye 500 500 http://apt.armbian.com bullseye/main arm64 Packages 100 /var/lib/dpkg/status 11.1+deb11u8 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages

Hi Guys, I wanted a debian stretch based OS, and I followed Olimex consideration on Armbian. The I visited the Page of Lime2( not nand or emmc): https://www.armbian.com/olimex-lime-2/ The stretch Image that is there...is configured to boot from emmc :( I want a debian stretch based version. I checked sha256 checksums OK. Serial Debug Output: U-Boot SPL 2017.11-armbian (Jan 25 2018 - 01:01:01) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 mmc_init: -110, time 37 spl: mmc init failed with error: -110 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the boar…

The Volumio team is currently investigating whether our sopine64 based motivo board (https://volumio.org/epic-journey-called-volumio-motivo/) could boot from usb using SPI flash. I'm aware of the sunxi SPI developments in u-boot and mainline kernel, and that we theoretically should be able to flash the SPI-NOR chip with the correct u-boot version using FEL mode. I also read that armbian has been prepared for booting from usb (as @martinayotte mentioned in other places). My question is, did anyone actually do anything in this direction, is there something I could help testing with? I know how to compile u-boot as I've done this with armbian's u-boot ver…

Hello everyone, I am encountering problem with pulseaudio on Bananapi M1. I don't want the board to suspend speakers on idle. As Pulseaudio is used I simply commented this line: ``` ### Automatically suspend sinks/sources that become idle for too long #load-module module-suspend-on-idle `` in `/etc/pulse/default.pa`. The problem is that if I play something e.g. raspotify I dont hear the sound anymore. As soon I keep raspotify playing and restart Pulseaudio (killall pulseaudio) the sound is back again. If I pause music I lose sound again and need to kill pulseaudio. Does anybody encounter same thing?

Some time before I installed iobroker on my cubietruck and since that the system crashes every now and then. Two times iobroker was not able to start anymore after a crash. After googling I found out that maybe my SD card is the problem and so I bought a SSD. Now I found out that I don't have to reinstall the system. I can simply transfer all data from SD to SSD by using nand-sata-install. Everything worked fine. System reboots. But only the SSD partition was formated and all data was transfered. The boot information was not changed. Because I have no idea about unix boot configuration I better keep my hand…

Hi. Is there any way to download armbian mainline kernel 4.11.6 source? (I want to compile small kernel module) There is only 4.9 source package available...

Hello armbianers ! Armbian 22.11.1 Bullseye with Linux 5.15.80-sunxi on a banana pi m1 I've connected a lipo battery to my bpi m1, and now when I try to shutdown -h 0, it ends up in a kernel panic and instead of shutting down it remains powered up. Is there anything I can do to fix that? I'd know how to shut it down talking to the axp209 via i2c, but I'm not sure how/where to put that, or if that would be or not the proper way to go. Thanks, George.

I've read this and it surprised me noone mentioned e2image. I'm using armbian orange pi pc build. The fs is stock ext4 hence why I stick to e2image below. It is not about cloning a live system, hence the sdcard is plugged into my PC. Fdisk shows a single partition at 4M offset. First I backup the partition table and bootloader dd if=/dev/sdX of=offset0.img bs=4M count=1 Next I backup the single partition with e2image into a qcow2 image e2image -Qa /dev/sdX1 part0.qcow2 qcow2 only keeps used blocks. My partition size is 14.7G, space taken is 12%. part0.qcow2 file is 1.7G. Done with backup…

Hi, I am using blinkt on win plus, but seems like there are no python GPIO library suits it. Anybody have an idea?

Hi ,,I'm a new user,,,,,OP Zero , I have this mess in the armbianEnv.txt , but i didn't edit it ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDb34fWZZQ2gTi9CuFLQbQ0S3dRH48ZKkzjv6xZ6lFs$ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^$ usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u Is correct? How is the default file? Can someone gime the correct? Thanks

Hi everybody. I'm stuck on working touchscreen with banana pro running vanilla jessie desktop. My touchscreen has goodix controller that supported mainline kernel. But when i install goodix driver module, an error that saying "request IRQ failed" show up in dmesg. I think i need to inform module for right interrup and reset pins connected board, but how? i'm connected int pin of touchscreen panel to pin7 that labeled "io1" on board. Please help me. links: goodix driver source, banana pro pin definition schema

Hi, I bought an orangepi zero H5 and I try to setup armbian on sd card. I write the image with etcher but there is no screen display when I boot. I wait long time about 10mn, my card is 16Gb, but no display on my hdmi tv. I test Armbian_5.27_Orangepizeroplus2-h5_Ubuntu_xenial_dev_4.11.0 , and the nightly build Armbian_5.27.170520_Orangepizeroplus2-h5_Ubuntu_xenial_dev_4.11.1 but it is the same story: no display. I test the official Ubuntu from Orangepi there is no problem, the boot is fast and I get display on my tv. Do you have some advice ? Thanks. G*

Hi, I have Orange Pi Zero based on H2+ which is failed to boot Armbian_5.34_Orangepizero_Ubuntu_xenial_next_4.13.8.img Symptoms: Green power light is always on, red led next to it does not flash at all. Ethernet lights are off. I am using proper power supply and Sandisk A1 16Gb Class 10 micro sd-card. Connecting UART-USB adapter based on CP2102x to UART port next to Ethernet ports shows nothing. Exactly same setup, same hardware, no changes on connections/setup boots "Armbian_5.30_Orangepizero_Ubuntu_xenial_default_3.4.113.img" image without any problems. UART works fine. Any ideas how I can help to test newer image?

Hiya, Using a Banana Pi M1 as a factory production tester in China, running Armbian Mainline 4.6.3. Works fine here; never had the problem they're reporting, but they're saying: a) after a certain amount (unspecified) of time the boards crash and get stuck in a reboot loop displaying screen as shown in JPEG - "kernel panic not syncing - Attemped to kill init! exitcode=0x000000b" b ) rewriting the SD card image (from one I provided; a 4GB pre-configured image) fixes it (until it happens again) c) Only useful thing I can get from the photo attached is that the stack trace in the image (which is all I have to go on btw; trying to get a copy of the ba…

Hello all, I bought this OPZ, it was cheap and I was curious. Primarily for a yet-another-headles-server-without-wifi. I am used to different hardware and Debian since "the days You compiled Linux kernel in just 48 hours". I read quite a lot about OPZ and different OS solutions - You have quite a few weeks before You get Your parcel from China to Your mailbox in Sweden. My first SD card I bought from China, it was Kingston 16GB class 10 an all of that. Worked like charm in couple of hours then after reboot it was unreadable. I spent days in search for solution, tried to reformat it in different ways on different machines and using different OS and software combination.…

Hi guys, I was running my Orange Pi Zero Plus perfectly on the dev channel but I did an apt upgrade the other day and it seems to have broken something. I hooked it up to a usb serial device and here's the log: https://pastebin.com/jiB9TZdh Any ideas on how I can fix this? I can interrupt the boot process and I get to a screen where I can run limited commands but I'm not sure what to do at that point. I'm thinking it might be easier to just reflash and start again. This post is mainly for the devs to let them know there might be an issue with one of the kernels? Cheers.

when unpacked to the home directory: user@nanopiair:~/linux-source-5.1.0-sunxi$ find . -xtype l ./debian/hdrtmp/lib/modules/5.1.0-sunxi64/build ./drivers/net/wireless/rtl8812au/include ./drivers/net/wireless/rtl8812au/platform ./drivers/net/wireless/rtl8812au/hal ./drivers/net/wireless/rtl8812au/os_dep ./drivers/net/wireless/rtl8812au/modules.order ./drivers/net/wireless/rtl8812au/core ./net/wireguard/tools/wg-quick/wg Didn't stop me from doing what I needed. All the rtl8812au symlinks point to /home/igorp/samsung/cache/sources/rtl8812au/*

I recently rebooted my Cubietruck after a longer time because the WiFi daemon didn't work properly anymore. After the reboot, however, the system didn't boot from NAND anymore. I attached a serial console and got the following kernel panic (the full serial log is attached): <0>Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 12.867986] Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [<c001538c>] (unwind_backtrace+0x0/0x12c) from [<c0714d54>] (panic+0x9c/0x1cc) [ 12.887857] [<…

Initially I attempted upgrading the kernel from 6.1.26 to 6.1.33 using the build scripts to generate the newer kernel and headers. After rebooting I found that the system just appeared to hang around starting kernel. I did wait 10 minutes at first, thinking that perhaps their maybe some stuff going on in the background but after that conclude that it had most certainly crashed. The frustrating thing being that I did not appear to get any errors come through the debug port. At this point I assumed that perhaps something may have broke during the upgrade. My second attempt was using a completely fresh compiled image but unfortunately the result was still the same. …

I have Orange Pi Zero Plus (H5 CPU) and Huawei E303 HiLink USB modem. The modem doesn't have any enabled interfaces such as CD-ROM, SD CARD, and other unusuable stuff except RNDIS interface (I want to believe that AT commands really disables it). When Armbian is started, connected to USB modes normally starts and system has new network interface and all works fine. When I try to power on board with connected modem, Armbian doesn't start, onboard LED doesn't light, modem starts normally and indicate normal link (blue LED lights). Here is log when modem hot-plugged: Spoiler Mar 18 04:17:04 localhost kernel: [ 9.033246] usb 3-1: new high-speed…

Hi, Nanopi R1 - Kernel and Armbian version: 4.19.62-sunxi #5.92 I have the following problem: If I put the ethernet cable on the interface, and then turn on the nano pi, the interface receives a valid ip. But the problem is, if I start nanopi without the cable connected, and I connect after system boot, the interface does not receive ip configuration. Configs and logs: /etc/network/interfaces: source /etc/network/interfaces.d/* auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.100.3.1 netmask 255.255.255.0 gateway 10.100.3.1 auto lo iface lo inet loopback up command iptables-rest…

I have a Adafruit PN532 connected over UART to the orange Pi Zero on UART1(p8/10) i added the uart overlays to armbianEnv.txt and edited the libnfc.conf to include device.connstring = "pn532_uart:/dev/ttyS1" #device.connstring = "pn532_uart:/dev/ttyS1:9600". I commented included a fixed lower baudrate to test if it might have been the problem. To thest the theory i connected a arduino due to the same serial port to print somting to see if there was any communication but nothing went through the python code i used was simple : import serial ser = serial.Serial('/dev/ttyS1') print(ser.name) ser.write(b'hello') ser.close() the Arduino sc…

Hello, I'm buliding a music player for my old car using Orange Pi PC Plus. I would like to use external incoming logic levels (3.3V / 0V) to wake up the OPi from suspend state. Could you help me how to do that? Waking up using the HW button SW4 is working perfectly. I need to do this using external logic signal connected to PA11 / GPIO pin #5. I tried the following setting in fex editor: [gpio_power_key] key_used = 1 key_io = port:PA11<6><default><default><0> It doesn't work. I keep the pin on HIGH (3.3V) normally, and when I bring it to LOW state, OPi won't wake up. I tried also ch…

Hello community, I'm looking to build an internet cube (https://internetcu.be/). Basically, the project uses an A20-OLinuXino-LIME2 but I'm looking to see if a better armbian could do the job. Prerequisites are quite similar to a NAS : quality, stability, performance, minus 80$, Gibabit LAN, SATA, USB. So I have 4 models in mind: - Banana pro - Banana pi - A20-OLinuXino-LIME2 - Espressobin Which one is best suited and/or do you have other models in mind?

Hi, I am using Nanopi Neo board and I need RS485 driver to control DE pin automatically. I have prepared DTS Overlay file: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&uart1>; __overlay__ { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart1_pins &uart1_de_pin>; rs485-rts-gpios = <&gpio6 8 0>; /* PG8 active-low */ linux,rs485-enabled-at-boot-time; rs485-rts-delay = <0 300>; }; }; fragment@1 { tar…

/proc/cpuinfo does not list serial number How do I read the chip serial number?

Should it be possible to take a working SD card out of one OrangePi Zero and put it in a new one? Same board and amount of RAM and everything.

Hi , sorry for my english guys after Update /Upgrade to armbian 5.38 , my sytem did not rebooting anymore , before it was Fine for Long Time with Reboot Every Night I have not so mutch Experience with Linux i hope Same one can give me a hand, Best is a Step by step List I‘m connected directly to The Board via hdmi, i did not have a Network cable conected at Moment Because i‘m not at Home and i took The cubitruck with me to My workplace 2 pictures : https://picload.org/view/dagwdolr/fd49eb8f-23bb-4b4d-9763-e9bd87.jpg.html https://picload.org/view/dagwdola/6f5eea…

I am having problems with ethernet, the sbc was connected to 100 mbps network and it worked normally, but recently i relocated it and connected it to another cable, the problem is that now i only get 10mbps, the cable is ok because it tried in my pc and got 100mbps, but i only get 10mbps on the sbc, then i found how to fix this in settings, but i acidentally removed ethernet connection that i was using and now the ethernet doesn't work, do i have to change something in network interfaces? also it says no link detected

Hey all, Have been using my Banana Pro w/ Armbian & a 1tb HDD as a Micro Home Server w/ Bittorrent Sync/Samba Shares/Webmin. I attempted to install Syncthing from the install script and it errored after saying "package cant be opened" It became unresponsive to commands. I powered it off then on again and it says "Bad crc error" at boot & seems to find its dhcp IP but hangs.. Google searches havent helped me resolve the issue, thanks.

Hi everyone. I almost gave up while reading tons of forums:( I bought CO2 sensor MH-Z19 from aliexpress. As I figured out this sensor used by RPi without any problems. Manual I found here: https://www.circuits.dk/testing-mh-z19-ndir-co2-sensor-module/ I connected module as mentioned: Vin - 2 pin gpio GND - 9 pin Tx - 13 pin Rx - 11 pin Module was blinking when I powered on my OPi, but when I tried to send data to UART nothing happened. I got timeout. I tried to connect Tx and Rx (11 and 13 pin) by cable, then sent bytes and immediatley got answer, UART work, as I understood. I checked uart in armbian-config menu and all (…

We have a project based on FriendlArm's NanoPi Neo Air board. Currently the devices are running Armbian 18.04 LTS loaded from emmc. We are looking for a way to update the devices "offline" / with no user interaction. We can upload data to the devices via FTP and also can execute shell scripts. We can not easily access the on-board micro SD slot but have an external SD-Slot / USB-A Port with lots of free memory on each device. Any hints or explanations are very welcome!

I have installed ~$ uname -a Linux orangepioneplus 5.4.18-sunxi64 #trunk.038 aplay -l **** List of PLAYBACK Hardware Devices **** card 0: allwinnerhdmi [allwinner-hdmi], device 0: 5091000.i2s-i2s-hifi i2s-hifi-0 [5091000.i2s-i2s-hifi i2s-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1 works good alsamixer When choosing allwinner-hdmi

Hello folks, I'm having trouble booting https://dl.armbian.com/lime-a64/Debian_stretch_next_nightly.7z as of today on my A64-OLinuXino-1G4GW. Armbian is installed on an external µSD card; the device has internal flash. Do you see, how I can fix this issue? Thanks, yanosz Log is: U-Boot 2018.05-armbian (Aug 21 2018 - 08:46:56 +0200) Allwinner Technology CPU: Allwinner A64 (SUN50I) Model: Olimex A64-Olinuxino DRAM: 1 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** Failed (-5) In: serial Out: s…

Hi, can anybody tell me, why the rights on the serial port ttyS0 are R/W for the user (root), but only W for the group (tty) ??? crw--w---- 1 root tty 251, 0 Jan 24 19:45 /dev/ttyS0 Hardware is orangepi one, OS is Linux pi-one 3.4.113-sun8i #6 SMP PREEMPT Tue Jan 16 14:36:25 CET 2018 armv7l GNU/Linux I can change the rights with chmod, but the change is not permanent after a reboot. L.

Hello! I want to connect to the I2S the DAC PT8211. But it has an another coding format - left justified (Sony) 16 bit. I have already put a 16-bit frame in script.fex, but I can not do the LJ. On the test sine signal, the tip of the sine is turned upside down. Tell me how to change the output format of the stream from I2S to the Japaneese Left Justify? This part of my fex: [pcm0] daudio_used = 1 daudio_master = 1 daudio_select = 1 audio_format = 0 signal_inversion = 1 mclk_fs = 64 sample_resolution = 16 slot_width_select = 16 pcm_lrck_period = 16 pcm_lrckr_period = 1 msb_lsb_first = 0 sign_extend = 0 slo…

Hello, when I connect R307 fingerprint reader to USB port, Linux identifies it as mass storage device. If the device is connected to the Orange Pi board before turning on, the system resets itself on early startup with "Resetting CPU..." message. What can be the reason and how to avoid it? I know about alternate serial connection, but would prefer to use USB. I use Armbian recent version with console image. Thanks in advance.

I need some help with using pwm on my orangepi3, i installed wiring pi and turned on leds, but i don't know what pins are pwm capacble nor don't i know how to use pwm, i also want to add an ir remote to then change modes of led strip, can somebody help me with that or will it be easier to just use a microcontroller since i have a lot of experience with programming them but almost no with orangepi3 help would be greatly appreciated soft pwmlibrary? also installed ir support, but can i get data from the ir sensor with wiring pi?

Is there a plan for supporting the "NanoPi Duo2" from"friendlyarm" in the future? http://wiki.friendlyarm.com/wiki/index.php/NanoPi_Duo2

I'm trying to set the Pin G11 on a NanoPi Neo, previously configured as input, to output in C++ by mapping the PIO function register into the virtual memory with mmap and setting a single bit. As per the Allwinner H3 Datasheet the following hardware addresses are specified: Similar to the Raspberry Pi's function register, the Pin knows at least two states: 000: input 001: output ... In my Script, I'm therefore trying to set the 12th bit of the PG Configure Register 1. Here's my C++ code: struct peripheral { unsigned long addr_hardware; int map_size; int mem_fd; void *mem_map; volatile unsigned long *addr_virtual; int …

After upgrade to latest kernel (4.19.38) my device only boots into maintenance mode. System is on emmc and no problems before. I started armbian-config and switched back to previous kernel, but it doesn't boot system. Even with all USB devices disconnected it didn't start (as i see there are some usb errors in log), file system seems to be clean, just didn't start system in normal mode.... Any advice? Thx Update: OK, solved, after installing latest updates within maintenance mode its ok again....

I am trying to set up a video loop that runs continuous on boot up

Preamble: I have done numerous hours of reading and searching (due diligence). See end. I have a FA NanoPi NEO Core-2 LTS with shield and 64G M.2 (This shield uses JMS567-LGBB1A chip USB to sata for M.2 access). I have successfully installed Armbian from SD to and booted from the eMMC. Armbian Stretch mainline kernel 4.14.y - This image https://dl.armbian.com/nanopineocore2/Debian_stretch_next.7z armbianmonitor -u results http://ix.io/1xAA Logs indicate formatting did occur correctly as far as I can tell. The volumes are formatted as I selected - along with an 'extra' ext4 volume that looks like it is just for boot. NOTE: Since…

I recently updated the OS (apt-get dist-upgrade), for one of my test systems, and subsequent to this Kismet has stopped working with the wlan0 interface. Everything was working properly before this update. I see it (and wlan0mon) showing Promiscuous mode in the output of iwconfig. I'm not really a Linux person, so any pointers on how I can diagnose/repair?

Hi, guys, today I've menaged how to make my opi1 work with armbian. the problem is that my hdready tv (720p50) has some problem with underscan, the desktop goes off screen so I cannot see the taskbar. Of course this is a problem of my tv, because I have the same problem when I use it as monitor for my PC, but there I can set the underscan through nvidia setting. So, How can I set up the overscan/underscan to see all the desktop on 720p? (using h3disp and set 576p doesn't work, I have "no signal" on tv) thank you in advance

Hi, I have found a problem when I reboot my NanoPi Neo, related to WiFi + BL device which is plugged in USB 2.0 port. The WiFi device is a Realtek 8821cu and system loads driver correctly when I do a cold boot or if I hot-plug it, but it fails in a warm boot. After doing many tests, I realized that if I plug the WiFI dongle in a non-powered USB 2.0 hub and I connect this latter to the NanoPi Neo's USB 2.0 port, then it also works. I don't have anymore idea to solve it. The 8821cu driver fails because WiFi device shows itself like powered down.

Greetings. Please help with accessing GPIO's UART1 and UART3. Currently installed nightly build: root@orangepiprime:~/sunxi-DT-overlays/sun50i-h5# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepiprime BOARD_NAME="Orange Pi Prime" BOARDFAMILY=sun50iw2 VERSION=5.46.180607 LINUXFAMILY=sunxi64 BRANCH=next ARCH=arm64 IMAGE_TYPE=nightly BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image Added DT overlays for all GPIO uarts: root@orangepiprime:/boot# cat armbianEnv.txt verbosity=1 console=both overlay_prefix=sun50i-h5 rootdev=UUID=666e2e1a-80be-4261-9e66-4cd8a4b14679 rootfstype=ext…

Hi to all, I'm newer so I hope your comprehension. my board Orange Pi Zero 512 my python script for turno on/off rele board works well, but only if call it directly form terminal. If call it from cgi, crontab don't controll the rele board: gpio.init() semms crashed but the script complete its work. What I'm wrong? Thanks ---- from pyA20.gpio import gpio from pyA20.gpio import port gpioinit = gpio.init() gpioscfg = gpio.setcfg(port.PA19, gpio.OUTPUT) gpio.output(port.PA19, gpio.LOW) print "ok" -----

my opi pc only hosts smb/nfs/transmition, very hot at summer. Welcome to ARMBIAN 5.38 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i System load: 0.23 0.23 0.22 Up time: 68 days Memory usage: 28 % of 1000MB IP: 192.168.2.99 CPU temp: 65°C Usage of /: 26% of 7.2G when I change cpufreq gov, find no cpuidle driver, is that true? upstream status about cpuidle driver? I have to disable 2 cores to cool down, and also change cpufreq to ondemand.

Platform oPi Plus 2E with Armbian 5.31 (Legacy). I have configured a WiFi adaptor, and it works fine in connecting to an existing hotspot. When I attempt to use network manager applet (or nm-connection-editor/nmtui from a root prompt) to create an Ad-hoc network I am getting permissions errors. For NM TUI it is 'Unable to save connection: Insufficient privileges.', and similar for the other methods. Can anyone give me some pointers on how to diagnose and/or fix this? From the research I have done the nm-applet error is likely a simple config error (not set up to run as root for this function), but the other avenues failures seem odd.

Hi, I would like to run Armbian Stretch (mainline kernel 4.14.y) on Bananapi M1. Board has an issue - sd card detect pin is broken. In legacy kernel 3.4.y there was an easy workaround to change paramter sdc_detmode = 1 to sdc_detmode = 3 in /boot/script.bin file. How would I do this on 4.14 kernel which as I understand doesn't use script.bin anymore? I setup Virtualbox with Ubuntu 18.04 and I can compile image with default options. I only need guidance in what parameter and in which file to change.

Hi, I am stuck integrating IR in my board banana pi m2 zero. Can anyone guide me to setup IR?

Hello, Is it possible to get a WiFi Direct connection from Nanopi Neo Air to for example smartphone and send a file to it? I mean with not using router. Thanks in advance for every answer!

Hello! In this topic: It was confirmed that more than 1 pin GPIO can be used for 1-wire bus. How can I edit or create my sun8i-h3-w1-gpio.dts for this? Spoiler /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { w1_pins: w1_pins { pins = "PD14"; function = "gpio_in"; }; …

I have banana pi m2+ with ampak AP6212. Install Armbian 5.75 with Linux kernel 4.19.20 Driver on wi-fi brcmfmac. Wi-Fi access point actived via armbian-config. ifconfig: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.20 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::81:fcff:fe71:785b prefixlen 64 scopeid 0x20<link> ether 02:81:fc:71:78:5b txqueuelen 1000 (Ethernet) RX packets 76186 bytes 46503714 (46.5 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 12755 bytes 2691167 (2.6 MB) TX errors 0 dropped 0 overruns…

Hello Folks, sorry for popping up here with a technical problem first thing - but I have some trouble. I have a circuit where an attenuator is connected to PA19. Sadly, the port seems to have a pull up which stays active even when I use wiringPi to set the port to input - in fact, even if I short the pin to low via my Keithley ammeter, it still shows up as high. Re things which I already tried: I tried to reduce the fex file to look like this: [product] version = "100" machine = "orangepi-lite" [platform] debug_mode = 1 eraseflag = 1 next_work = 2 [target] boot_clock = 1008 storage_type = -1 [key_detect_en] keyen_flag = 0 [fel_key] fel_key_max = 7 fel_key_m…

Hi, Is there any reason why the card is only initialized as high speed SDHC on this board? On my phone, it is initialized as ultra high speed SDR104 SDHC. I'd like to know if there's anything I need to do to maximize the card's performance on this board. Thanks.

Hello, I have on my Orange Pi 2+ and Orange Pi 2+e Armbian 5.14 and 5.16 and both have the same problem: WiFi isn't constant. The signal fluctuates from 48% to 92% or from 20% to -1%. There is no difference with or without a LAN cable. When I connect the Orange Pi with a WiFi network the signal is constant. Is there somebody, who knows how to fix this problem?

Screen capture mpv and mplayer with vpdau outputs it is not possible, on players places window area is black. I tied with fbgrab and shutter. What screen capturing program we have to use for vpdau outputs capture?

Hello, I'm using the last Kernel (4.13.3) and U-boot (2017-09). I noticed that the device does not reboot each time we ask for it. It sometime get stuck and I have to start it manually, this is really annoying for my needs. I figure it out that the Device Tree from 4.13.3 introduce some improvement on AXP209 and power management. I tried Device Tree file from 4.11.x and everything seems fine. Does any body noticed it ? Thanks

Hello After spending hours of trying to create an older DEV kernel (5.1.21) here are the following steps in order that it will work. I will describle here about the 5.1.21 kernel but I think it can work for any kernel. 1. create lib.config file under build/userpatches with the following: KERNELBRANCH='branch:orange-pi-5.1' 2. And this is what create the magic: download the Armbian files that matches that distribution and replace all the files in the build directory: for example I have downloaded from here - This link is the build version from the branch of the 5.1.: https://github.com/FireflyTeam/armbian-build/tree/e…

I've been using the Armbian R1 image (Armbian_20.02.1_Nanopi-r1_buster_current_5.4.20.7z) on the NanoPi R1S with good success. In particular, the USB host port worked perfectly, with no changes required. I thought it was probably about time to upgrade to a newer kernel, so I downloaded Armbian_21.02.1_Nanopi-r1_focal_current_5.10.12.img, flashed it to an SD card, and booted. However, plugging in an external USB device results in absolutely zero shoing up in `dmesg -w`. I tried a USB-UART (STM32-based ACM), USB3 hub, USB 3 Mass Storage (Kingston 16GB), and a Playstation 3 Eye, without any entries in dmesg. To do some debugging, I also downloaded Arm…

Hi, Since latest update just a few days ago (Linux bananapi 4.5.5-sunxi) , the bananpi keeps telling me this: [ 5 updates to install: apt-get upgrade] . When i try to upgrade there arent anything to upgrade. In did apt-get update and apt-get upgrade and nothing to upgrade. I manually execute /etc/update-motd/40-updates and its true that it says that there are 5 updates. So there must be something there that its not chaning. Any tips on this? EDIT: ok i just fixed this by manually editing the file /var/cache/apt/archives/updates.number and setting it to 0 but i think this should be automatic and it wasn't working for some reason. (seemed like the script wasn't updatin…

update: the 5.59.180828 nightly building version may display a error temperature degree。 test real temperature using a thermometer ，two version display the same degree in thermometer about 49degree idle。 1. same board:orange pi zero plus v1.1,same room temp. 2. armbian 5.59.180828 nightly , idle cpu temp. about:49 degree. ------------------------------------------------------------------------------------------------------------- Welcome to ARMBIAN 5.59.180828 nightly Debian GNU/Linux 9 (stretch) 4.14.67-sunxi64 Linux opizeroh5 4.14.67-sunxi64 #85 SMP Tue Aug 28 10:55:16 CEST 2018 aarch64 GNU/Linux Stop monitoring using [ctr…

First of all I've got an OPI PC and I'm newbie with armbian and Linux in general I've managed to read DS18B20 temperature sensor and now I want to read Temp and Humidity from a SHT75 sensor which has the same specifications as the SHT1X family of Sensirion sensors. I've installed WiringPi library and I've been searching on google how to make SHT75 work with little success Any documentation or examples to see?? Any help would be appreciated Thanks

Hello, i am a "newbee" , just got yesterday my orange pi and did not get it working..... after hours i managed but it is strange ( i think ) the orange does NOT start with NO monitor cable attached..... it does does NOT start with a hdmi-dvi converter.... ( that i found on the web ). The ONLY way i get it started is : 1 - HDMI cable attached to a HDMI monitor AND 2 - Power button pushed AND 3 - then as last one plugin the power cable.... is that normal ?. i doubt it , that is why i ask... also then I have armbian working, super, no problem. but when hitting the restart button in Armbian the orange Pi plus 2e s…

Hi, when I try to connect to OPi Zero via USB TTL (PL2303) and run minicom -D /dev/ttyUSB0 -b 115200 -o, it seems to be normal until it booted to the Kernel then it start outputing garbage but when it started without USB TTL it just work normally U-Boot SPL 2019.04-armbian (Jul 16 2019 - 10:53:57 +0200) DRAM: 256 MiB Trying to boot from MMC1 U-Boot 2019.04-armbian (Jul 16 2019 - 10:53:57 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero DRAM: 256 MiB MMC: mmc@1c0f000: 0, mmc@1c10000: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** In: serial Out:…

Hello, I am using a NanoPi Duo2 with Armbian 22.11 and Kernel 5,15,80. This device uses an AP6216 wireless interface, which I have noticed are pretty common on sunxi based boards. I ran some bandwidth tests and had pretty poor results: [ ID] Interval Transfer Bandwidth [ 3] 0.0000-1.0000 sec 129 KBytes 1.05 Mbits/sec [ 3] 1.0000-2.0000 sec 129 KBytes 1.05 Mbits/sec [ 3] 2.0000-3.0000 sec 127 KBytes 1.04 Mbits/sec [ 3] 3.0000-4.0000 sec 129 KBytes 1.05 Mbits/sec [ 3] 4.0000-5.0000 sec 129 KBytes 1.05 Mbits/sec [ 3] 5.0000-6.0000 sec 127 KBytes 1.04 Mbits/sec [ 3] 6.0000-7.0000 sec 129 KBytes 1.05 Mbits/sec [ 3] 7…

Hello dear friends, please help can not solve a problem, the entire forum has clambered! as I can not turn on your WiFi Orange Pi Pc + ....

Hi. I'm working on it.I tried different systems ubuntu_lxde_desktop vs... Armbian 5.35 3.4.113 desktop board. gives a pink image error like in the photo. h3disp -m 1080p60 -d I've tried h3disp -m 1080p60 -c 1 I've tried h3disp -m 1080p60 -c 2 I've tried h3disp -m 1080p60 -c 3 I've tried but still no image how can i fix it ????

Hello Igor, first of all thank you very much for your efforts. I used Armbian in the past and wanted install some up-to-date version. However this fails/hangs independent of selected OS either at 'armbian-resize-filesystem' or 'Flush Journal to persistent storage'. The first boot may take some >15min if succeeds. However i can't login after as it accepts no keyboard input. I started testing upwards from very old version (sorry, i downloaded many and only few by Torrent, but i did send you some donation to cover this). Up to Armbian_20.08.2_xxx_5.8.6 it works well, irrespective of debian/ubuntu flavor. So, the bug came with Armbian_20.11…

Hey all, I'm using U-boot 2017-09 and Kernel 4.13. I'm looking for a way to disable the board auto start. I'm explaining. When you plug the power in, the board start by itself and U-boot does the rest. I would like to disable this feature in order to be able to plug in the power, charge the battery if needed and start the board with the regular push button. Is there any tweak to be done in the Device Tree ? Thanks Florian

[ 10.900422] libphy: 1c30000.ethernet: probed [ 10.921452] Generic PHY 1c30000.ethernet-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=1c30000.ethernet-0:01, irq=-1) [ 10.921469] sun8i-emac 1c30000.ethernet: device MAC address slot 0 a2:3f:fc:36:c5:70 [ 10.923862] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01 [ 10.923953] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01 [ 10.923958] sun8i-emac 1c30000.ethernet: device MAC address slot 2 01:00:5e:00:00:01 [ 10.923972] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.216443] random: crng init done [ 13.040824] sun8i-emac 1c30000.ethernet …

Hi, after I made a software-update for my Cubitruck last week, my VGA monitor shows text only up to "starting kernel", then turns black. HDMI still works. I tried to reinstall the newest versions of both Ubuntu Bionic and Debian Stretch, both show this problem. The old VGA monitor is used only for maintenance work on my home server and off most of the time, it would be a shame if I had to buy a new HDMI monitor for this purpose. What is going on? Thanks Engelbert

Hello, I have a problem on my orange pi 3 lts. Namely, I have armbian 23.03 Jammy Xfce installed and on some screens it shows normally, on others the image does not appear. I also tried using the Uart converter and it loads everything normally, but then the following message starts appearing every second. [ 161.905394] panfrost 1800000.gpu: js fault, js=0, status=INSTR_INVALID_PC, head=0xa005bc0, tail=0xa005bc0

Someone know how install step by step Glmark2-es for armbian ( Orange Pi PC ) ? I tried compile but no result

dear all , thank you for the armbian os which is work more than great with me , I already bought DLINK DWM-157 and follow the installation steps , and as i see all going fine with me , but when i connect the modem i receive this output , [ 64.089219] usb 2-1: device descriptor read/64, error -71 [ 64.579198] usb 2-1: device descriptor read/64, error -71 [ 65.209195] usb 2-1: device descriptor read/64, error -71 [ 66.659297] scsi 0:0:0:0: rejecting I/O to offline device [ 69.969188] scsi 0:0:0:0: rejecting I/O to offline device [ 72.924173] usbserial_generic 2-1:1.0: device has no bulk endpoints [ 72.949655] usbserial_gen…

Hi everyone! I wonder if modifying the "fbdev" driver to use Mali GPU to improve gaming performance is possible. I enabled `gpu` dtb, but according to "glxinfo -B" it uses "Device: llvmpipe, Accelerated: no". I'm curious if this can be improved somehow. BTW I found this old commit for Odroid C2: link

Hello, is the last BPi Vanilla wheezy image somewhere still available for download? I want to run it with Open Media Vault, which still needs wheezy. Thanks a lot. Michael

installed wireguard on orange pi, configured the config, it works. It was necessary to restart orange, and after restarting it don t connecting to the LAN cable, even the orange light bulb is not lit. I start without sd, everything is fine. Reinstalled, installed wg again and the same thing again. What is the problem? OS:Debian11 (https://redirect.armbian.com/region/EU/orangepi3-lts/Bullseye_current)

Hello, on a fresh install (Armbian_22.08.1_Orangepi3_jammy_current_5.15.63), the ethernet eth0 interface doesn't retrieve any IP. Here comes the kernel ethernet related messages: After that, I have launched a dhclient command that took several minutes to stop. Then, an APIPA address is attributed to eth0 nterface. So I have launched armbian-config to set the eth0 to static. And it worked. But how to make DHCP works? Thank you PS all others devices on my network can retrieve an IP by DHCP. I also tried others OS on my Orange Pi 3 boards and the…

board: orange pi zero plus (CPU H5) os: power on idle current is about 0.25A。 after poweroff the currtent rise to about 0.35A 。 and got error message on console: ----------------------------------------------------------------------- [ OK ] Reached target Shutdown. [67908.295169] reboot: Power down INFO: PSCI Affinity Map: INFO: AffInst: Level 0, MPID 0x0, State ON INFO: AffInst: Level 0, MPID 0x1, State ON INFO: AffInst: Level 0, MPID 0x2, State ON INFO: AffInst: Level 0, MPID 0x3, State ON ERROR: PSCI system shutdown: still alive ... -----------------------------------------------------------…

Can any one port the driver for ms5611 from kernel4.x to 3.4.39? I am using the sensor on olimex a20 micro 4Gb. I need it to use it in Android. I am willing to pay for porting.

Orange Pi Lite - Armbian 5.14 The desktop shutdown (or shutdown -h now) shuts down the desktop, the system starts shutting down, then the desktop starts again, then disappears and the system shuts down. Its not a disastrous problem, but just annoying. I've traced it to the fact that 'nodm' is seeing the desktop stop, and then restarting it. Apparently either 'nodm' isn't getting the shutdown signal, or ignoring it, or getting it too late. Any guidance on what 'nodm' config, or some other config might help me to fix this? /K

I was configuring onboard wifi of OPI ZERO, rev. 1.1 with the provided tool armbian-config. On one board it went just OK, on the second it froze, so I manualy powercycled the board. After that the board does not boot. I connected the serial console and here is the output I got: U-Boot SPL 2017.09-armbian (Nov 20 2017 - 02:53:16) DRAM: This is my first time troubling with u-boot, so I have no idea what this means, but it should give me more output. I will try to look, if there is 1.5V at the 1_5V pad.