Allwinner sunxi

Using this file or upgrading from an older version results in no sda showing up. Please Help! http://mirror.igorpecovnik.com/Armbian_5.00_Bananapi_Debian_jessie_4.4.1.zip Please ask for further information as I am still learning a lot. Thanks Igor, great work on the distros. Gary

When doing apt-upgrade to get the latest linux-jessie-root-cubieboard2, it fails with this error message: # apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages will be upgraded: linux-jessie-root-cubieboard2 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. Need to get 0 B/1.810 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] Y (Reading database ... 51863 files and directories currently installed.) Preparing to unpack .../linux-jessie-root-cubieboard2_5.00_…

I have a BPI-M2 and I am trying to patch kernel 4.4.1 with contents of archive patches-4.4.1-rt6.tar.gz for RT-Preempt while making Debian Wheezy xfce desktop image. I have tried putting patches in /userpatches/kernel/sunxi-dev and /userpatches/kernel/sunxi-dev/linux-vanilla/v4.4.1 nether worked. Made image but patches were not applied Any help would be appreciated Tim

No sound card on 5.0 trusty vanilla, but it works on jessie. trusty: aplay -l aplay: device_list:268: no soundcards found... on jessie: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun4icodec [sun4i-codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Both are armbian 5.0 with kernel 4.4.1, on Cubieboard2 Also warning on installing cryptsetup on trusty: update-initramfs: Generating /boot/initrd.img-4.4.1-sunxi cryptsetup: WARNING: failed to detect canonical device of /dev/mmcblk0p1 cryptsetup: WARNING: could not determine root device from /etc/fstab This error doesn't appear on jessie. Also, on trusty the ha…

I have a "Banana PRO" One USB disk, 2TB with three partitions in ext4, the first partition is mounted (hdb1), the other two are not mounted. One USB disk, 4TB with a single ext4 partition mounted (hdc1). One SATA SSD disk with a single ext4 partition unmounted (hda1). Several aesthetic considerations: After the upgrade, reboot and login, the welcome screen and 100% battery!!! Hurrah!!! It seems that the MMC is 9% occupancy and ... oh! my hdb disk has only one partition? ah no, only reads hdb1. And the other two disks? I have two mounted partitions but only shows one. Turn off the system with the poweroff order and boot from the power button again, the battery is down to…

Hm.. I'll write to you what I have done. Please tell me what's wrong. I have a cubietruck, and I downloaded this one, Legacy Jessie(http://mirror.igorpecovnik.com/Armbian_5.00_Cubietruck_Debian_jessie_3.4.110.zip), and installed it. Install was successful, and worked good. I tried to use nand and SD, and SD only. There were no differences. The result that I want to tell you below, is the same on both cases. ......................... After OS install, I followed this instruction, and I installed several packages. Instruction : wget -q -O - http://upgrade.armbian.com | bash Packages : NFS server Samba server Deluge Daemon(server) I have a 3TB sata disk …

Hallo, I have got the Banana Pi (no Pro) with Armbian Trusty Desktop and Legacy Kernel 3.4.109 installed. All updates done. Problem: No Sound on HDMI Output. Any suggestions? Known Problem? bewoco

Hello. Thank you for your great effort. I'm using CubieTruck, and I installed Debian Jessie(Armbian, of course), and make it boot from Nand. It was successful. However, if I insert sd card into the slot, CubieTruck won't boot. Isn't it possible to boot from nand while sd card is inserted? I want mount the SD card to /home directory. (Using USB slot works.) Thanks in advance!

Hi, i recently installed jessie (vanilla) on a cubietruck. I have problems with a usb stick to be correctly detected. It is a rf stick to communicate with Homematic devices (HM-CFG-USB). When I plug it in, I get following messages in syslog: Feb 8 21:34:38 localhost kernel: [ 5043.855985] usb 3-1: new full-speed USB device number 8 using ohci-platform Feb 8 21:34:38 localhost kernel: [ 5044.079007] usb 3-1: New USB device found, idVendor=1b1f, idProduct=c00f Feb 8 21:34:38 localhost kernel: [ 5044.079041] usb 3-1: New USB device strings: Mfr=4, Product=14, SerialNumber=36 Feb 8 21:34:38 localhost kernel: [ 5044.079060] usb 3-1: Product: HM-CFG-USB Feb 8…

Hello, I have installed Armbian on my Banana M1+ and I have noticed „something“ strange in network communication. The network connector blinked rapidly even though nothing was running so I have installed iftop and found out this: iftop -i eth0 -NP Ankh-Morpork => a81.sub72.net78.udm.net Ankh-Morpork:51413 => a81.sub72.net78.udm.net:57855 Ankh-Morpork => ip70-118.245.80.crimea.com Ankh-Morpork:51413 => ip70-118.245.80.crimea.com:52026 Ankh-Morpork => adsl-225.37.6.247.tellas.gr Ankh-Morpork => ip5653f1a5.direct-adsl.nl Ankh-Morpork:51413 => adsl-225.37.6.247.tellas.gr:29932 Ankh-Morpork:51413 => ip5653f1a5.direct-adsl.nl:6881 I am won…

Hi, My Armbian Vanilla for Cubieboard1 is working las 2 months... Theres is an iissue with I2c, that I don't know how to avoid or stop Dmesg and syslog are flooded with this message Feb 7 11:09:05 localhost kernel: [172015.158063] i2c i2c-0: master_xfer[0] W, addr=0x34, len=2 Feb 7 11:09:06 localhost kernel: [172015.688415] i2c i2c-0: master_xfer[0] W, addr=0x34, len=2 Feb 7 11:09:06 localhost kernel: [172016.158440] i2c i2c-0: master_xfer[0] W, addr=0x34, len=2 Feb 7 11:09:18 localhost kernel: [172027.837841] i2c i2c-0: master_xfer[0] W, addr=0x34, len=2 Feb 7 11:09:18 localhost kernel: [172028.087760] i2c i2c-0: master_xfer[0] W, addr=0x34, len…

Hi! I just installed Armbian Jessie on my Cubietruck to replace the outdated CubianX-distro. Title: Armbian 4.81 Cubietruck Debian jessie dev (unofficial) Kernel: Linux 2016.01-rc3 Build date: 28.12.2015 I use the Cubietruck as an owncloud-server and as a tvheadend-server. Tvheadend doesn't work properly. There seems to be a hardware-issue with the DVB-S2-receivers. One of them fails sometimes. Tvheadend often stopped. But now i found one (the?) reason in the syslog: lowmemorykiller Feb 4 08:29:04 localhost kernel: [11909.498000] lowmemorykiller: Killing 'tvheadend' (622), adj 0, Feb 4 08:29:04 localhost ke…

Hi all, Well i am trying to add 2 wireless board and 1 ethernet controler with out successful... The boards that i am trying are: Raspberry 2, BPI-M2 and in some weels Orange Pi Plus. The idea is add : a second ethernet 10/100/1000 to the board (enc28j60 module) one wifi card: http://www.sparklan.com/p2-products-detail.php?PKey=00b4zgTVJUGKMz3D2fh3hT0YqEY5pUo0Vq2M_xYD&WUBR-508N%20Module%20Series other wifi card: http://es.aliexpress.com/store/product/VIA-VNT9271-USB-Embedded-WLAN-Module/213061_633552912.html?storeId=213061 1. In the begining i try connect the ethernet enc28j60 module to the SPI, but in the banana sucks (http://lists.infrade...ary/2299…

Hi, after upgrading from Wheezy to Jessie (Legacy, i followed the documentation), everything is ok, except MOTD does not show TEMP, and other data as used in Wheezy, is this a known problem and how can i get back the old MOTD? Another question im struggling setting up slovenian keyboard layout any info on that? dpkg-reconfigure keyboard-configuration gives me an warning: root@bananapi:~# dpkg-reconfigure keyboard-configuration update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults insserv: script ramlog.uninst: service ramlog already provided! update-rc.d: warning: start and stop actions are no longer supported; falling back t…

Hi all, i got the problem, that my Banana Pi doesn't boot. I receive the error Unknown command 'U-Boot' - try 'help' This is similar while try use openwrt, bananaian or ip-fire. Did i brick my PI? Can i do something? Thanks BigChris

Hi. Any idea about including snappy ubuntu core in the build process?

Hello, I have just bought a bananaPro. I would like to learn a little by installing armbian and enabling the video acceleration. Currently, I have no LCD display, so I would start to install Debian Wheezy or Debian Jessie (legacy) so that to be able to log in through ssh. Nevertheless, on the download page for bananaPro it is said that "Mali drivers fails to compile". Is this driver mandatory for video acceleration to work ? I figured out it was rather related to cedarX. Then, which armbian image is best suited ? Thanks in advance for some piece of advice. Best regards deb2016

Is there any possibillity to disable "all" boot output on the Olimex Lime 20 board? Including the bootlogo and verbose text? Thanks, Vincent

I am using an A20 micro with an old 10" LCD from Olimex, now discontinued, A13-LCD10TS All is working without problem but no touch screen. In old Olimex Wheezy image, touch screen was working with tslib. In new Armbian Jessie image there is no tslib and touch screen is not working. Also using modprobe ft5x_ts as suggested in this forum give an error message modprobe: ERROR: could not insert 'ft5x_ts': Operation not permitted FEX file seem correct and is same as old FEX used with Wheezy What I am missing? Regards Franco Spinelli

Hardware: Banana Pi Pro. The Android is based on Linux. Android very well plays Internet video HTML5. Therefore hardware resources allow to play Internet video HTML5. Bananian and Armbian doesn't play Internet video HTML5. Please help! How to play Internet video HTML5 on Bananian or Armbian? Someone did it? What results?

Hi all, I bought this ethernet: The idea is connect to the SPI, but not sure what pines i must to connect... i follow this: Raspi.tv So i connect the pines, exactly like there say, but he connect on the UART not in the SPI :S (have 2 pines more, but the pines that he conenct i have in my ethernet board) So i connect to the gpio of my board and well turn on! yeah! xD: If i fo ifconfig i see this: root@bananapim2:~# ifconfig bond0 Link encap:Ethernet HWaddr 7e:99:6b:7c:04:39 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 drop…

Hello, I want to buy this display https://www.adafruit.com/products/2354 will seamlessly work with ubuntu on bananapi m1?

Hi all, traditionally I have used Bananian on the Bannan Pi M1+, but I thought that I would give Armbian a go as there seems to be more activity here and there are tools for compiling an entire image from scratch :-) So far I love Ambian, thank you for the work. I have tried the vanilla Jessie image (both downloaded from here and compiled myself) on the Banana Pi M1+ and with the exception of the WiFi issuet which I solved from this forum, all ran well. However I can't seem to find an SPI driver. My apologies if there is another forum post about this, I did try searching but the search function removed SPI from the query due to it being less than 4 chars :-( When…

Hi, i am new here and like to say hello. On my new cubietruck I have one after another tried to install and use wheezy and jessie with legacy and vanilla kernels. With the legacy versions i failed because there seemed to be no video-output on VGA from the kernel. The boot-process seemed to be stopped after Starting Kernel. Then i found that it was visible on HDMI but not on VGA. Because I have only VGA-Screen on my desk i went on with vanilla jessie. But on the download-page there is the note "No audio or accelarated video". What does it mean in detail? I installed mplayer but in fact there is no sound at the jack. Isn't therefore any driver available? Which …

Hello, My problem is that curl tries to use ipv6 to resolve DNS entries and my home modem-router doesn't handle ipv6 so curl fails and fallbacks to ipv4. The process lasts 10 to 15 seconds because of this. For example (38s - 23s = 15s to resolve hostname): $ curl -v --trace-time https://api.owncloud.com 15:53:23.053958 * Rebuilt URL to: https://api.owncloud.com/ 15:53:23.055233 * Hostname was NOT found in DNS cache 15:53:38.583565 * Trying 85.25.74.45... 15:53:38.803420 * Connected to api.owncloud.com (85.25.74.45) port 443 (#0) And if I add '-4' option (only a few milliseconds): $ curl -4 -v --trace-time https://api.owncloud.com …

Scenario 1:[router]<--(ethernet)-->[pcDuino3] pcDuino3 IP: 192.168.1.5 root@pcduino3nano:~# dpkg-reconfigure tzdata Current default time zone: 'America/Bogota' Local time is now: Wed Dec 31 20:48:49 COT 1969. Universal Time is now: Thu Jan 1 01:48:49 UTC 1970. root@pcduino3nano:~# date Wed Dec 31 20:49:01 COT 1969 root@pcduino3nano:~# ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== yak.osoal.org.n .INIT. 16 u - 64 0 0.000 0.000 0.000 bunny.zeroloop. .INIT. 16 u - 64 0 0.000 0.000 0.…

I want to write microSD card as less as possible and CUPS package uses the following path's by default (although can be changed): /var/cache/cups /var/log/cups /var/run/cups /var/run/cups/printcap /var/spool/cups /var/spool/cups/tmp But I think this paths are pointing to micro SD card (except .'/var/log') (or not?) root@pcduino3nano:/etc/cups# df -h Filesystem Size Used Avail Use% Mounted on /dev/root 7.3G 1.1G 6.0G 16% / devtmpfs 500M 0 500M 0% /dev tmpfs 128M 212K 128M 1% /run tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 128M 0 128M 0% /run/shm tmpfs 256M 0 256M 0% /tmp ramlog-tmpfs 256M 2.2M 254M 1% /var/log Which is the best strategy so this path's points to memory and N…

Hi when i connect to the WUBR-508N to the UART conexion, the raspberry2 and the BPI-M2 turn off... i try to test other pines of Ground and Power but i have the same result... Its possible that the board WUBR comes bad?? or before i must to configure something on system?

Normally the 'shutdown now' sequence makes my monitor 'lost connection' message appear but with this image the shutdown process do not finalize correctly...

Since updating to the (vanilla) 4.3.3 kernel, my Cubietruck has not read the real-time clock at boot time. This causes all log messages to show "Jan 1 01:00:10" until the NTP daemon kicks in. It also causes cron to remain confused about daylight savings until it is restarted. Looking at the release history at http://www.armbian.com/logbook/I see that v4.81 / 28.12.2015 includes a fix for a "Jessie RTC bug". Unfortunately it seems that this release has introduced an RTC bug! What was the fix, and is there an option I can use to reverse it? Before the update the boot messages looked like this: Jan 14 00:45:07 localhost kernel: [ 0.000000] Linux version…

Boot from SD without any problems, then install to NAND (no error)... In NAND boot it comes in the log... (transcription from a photo) [ OK ] Started LSB: Set preliminary keymap. Starting Remount Root and Kernel File Systems... [FAILED] Failed to start Remount Root and Kernel File Systems See 'systemctl status systemd-remount-fs.service' for details. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems (Pre). Mounting /boot. [ OK ] Started Load/Save Random Seed [ OK ] Mounted /boot. The 'Failed' message is the only error in the log. Problem: Can ssh locally ('ssh localhost') but can't from outside (it shows nothing). ping is responding. If I …

Hello, First of all thanks for the very nice dist, it's clean and optimized. Unfortunately the Banana Pi is unbootable after having done the following: Migrate the root fs to my USB drive and make it bootable with the nand-sata-install script Change the hostname (modify /etc/hosts, modify /etc/hostname, run /etc/init.d/hostname.sh, reboot) run apt-get update && apt-get dist-upgrade, reboot Each time the Banana Pi could not boot anymore, and that happened with both Jessie and Wheezie images. I can't get any screenshots of the boot screen because it's a headless server. Any ideas? mk16

Hi, as I need to use an OS allowing me to have Cozy and Gladys (both node.js) on my router (using them it as server) I tried to use armbian for the first time. I sucessfully installed armbian on a SD Card and boot it. My BPi-R1 is not connected to a display or other periherals (keyboard / mouse). Because I do not have those materials I sold them. It is just connected with RJ45 and has a HDD connected on the SATA port. I then connected my modem RJ45 connector to my BPi-R1 on the WAN port. I connected my computer on the first port (near the WAN one). I saw my laptop do not get an IP certainly due to the fact that LAN port seems to be manually activated. …

Allwinner video HW decoding on A10/A20 using VDPAU and GLES zero-copy support for Linux There is (unofficial) support available for video HW decoding and embedding the video zero-copy via GLES within Kodi using libvdpau-sunxi and VDPAU, i.e. unlike the kodi support from rella/empatzero/others the GLES layering (video overlays) do work completely in this implementation. Additionally my driver implementation supports DivX/XVID/MS-MPEG and has sprite support for MPEG-4 over the official libvdpau-sunxi implementation. Additionally there is HW JPEG decoding support available in Kodi too, e.g. watching photos these get decoded via the Allwinner HW. (unluckily pic thumbnails…

Hi, as I had set up my CubieTruck I decided to go with Legacy Wheezy ... Now I think about become a bit more current :-) Option 1 is to Upgrade to Legacy Jessie ... This is described in the documentation and hopefully should work that way, Correkt? Or Option 2 would be to go to Vanilla Jessie. Is this possible too? How? Thank you for your support, Ingo

Hi again guys, I buy some usb wireless boards to connect to the GPIO with the UART Pines, but in the especifications of the GPIO, only i see 1: Has you can see only GPIO 14 and 15 have TXD and RXD... I will use too the SPI to add other ethernet so... its possible use other GPIO for TXD and RXD?? In my Pixhawk (board for drones) i use I2C for monitoring stats via wireless (2.4Ghz), maybe this pines can work for usb wireless. If is possible, how can i program other pines for that? will be any diference? (more slow or more cpu resources or whatever?) Thanks like always!

Hi, I am trying to used Wifi on my Cubietruck, but I cannot get it running. Running Armbian Jessie 4.2.3 (Armbian_4.5_Cubietruck_Debian_jessie_4.2.3 - freshly installed), I changed /etc/network/interfaces according to the comments. # Wired adapter #1 auto eth0 iface eth0 inet dhcp # hwaddress ether # if you want to set MAC manually # pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838 # # Wired adapter #2 #auto eth1 # iface eth1 inet dhcp # hwaddress ether # if you want to set MAC manually # pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838 # # Wireless adapter #1 au…

I wanted to try 3.4 to see if I could build FFmpeg with the legacy Kernel. When I run any of the three (Trusty, Jessie, Wheezy) as soon as the script says starting Kernel, I get a few blue and green noise lines on the screen and then the screen disappears. I can use SSH and.the system is booting up and running. The one thing that I noticed is that when I log on, the name of the machine is LIME instead of MICRO. I'm running an Olimex Olinuxino Micro. Is there a config file that I need to tweek, or is the Kernel setup for a LIME? thanks MikeC

I have Armbian 4.5 Jessy Legacy 3.4.109 running in the internal NAND and tried to do apt-get update+upgrade what bricked the device. As precaution I setup an identical system on a CubieBoard 2, where the upgrade went fine. After two days of testing on this test board, I tried it the same way on my real server but it failed. The board is not completely bricked, but network is not working anymore which limits my access dramatically. This is what I did and the output during upgrade: root@Cube# uname -a Linux Cube 3.4.109-sun7i #5 SMP PREEMPT Wed Oct 14 20:33:00 CEST 2015 armv7l GNU/Linux root@Cube# apt-get update Get:1 http://security.debian.orgjessie/updates InRele…

Hello i am running armbian wheezy with the legacy kernel on an olimex a20 lime. I have atached an audio jack to the gpio pins. But cant get any sound on the output using speaker test. Do i need to do some configuration to get this to work ?

Hello I install Armbian into sdcard running on Cubieboard 2 but no audio capture devices. This is my system root@cubieboard2:~# uname -a Linux cubieboard2 3.4.108-sunxi #1 SMP PREEMPT Wed Sep 16 11:39:48 CEST 2015 armv7l GNU/Linux root@cubieboard2:~# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 8.2 (jessie) Release: 8.2 Codename: jessie root@cubieboard2:~# cat /proc/asound/cards 0 [sunxicodec ]: sunxi-CODEC - sunxi-CODEC sunxi-CODEC Audio Codec root@cubieboard2:~# cat /proc/asound/pcm 00-00: M1 PCM : sunxi PCM : playback 1 root@cubieboard2:~# lsmod Module …

Hi everyone, after getting Igor's image for Jessie with kernel 3.4.109 on January 10th, I did an upgrade and now I get: uname -a Linux cubieVDR 3.4.110-sun7i #10 SMP PREEMPT Mon Dec 28 11:48:43 CET 2015 armv7l GNU/Linux However, unfortunately I also get modprobe bcmdhd modprobe: FATAL: Module bcmdhd not found. According to http://www.armbian.com/documentation/, it does not say anything about having to do something special to obtain the module in the section called "How to set wireless access point?". Also, on another machine running kernel 3.4.108, everything is working fine (see my post in this forum). What do I need to do to get the AP working? Cheers…

Hi friends! Here is the situation. Trying the armbian jessie 3.4.109 and 4.2.3. When installing a new soft it takes to much time. For example, when running apt-get upgrade after fresh image install, it takes about 17 minutes. Of course it contain the core update. But that upgrade part on jessie takes about 7min, on wheezy about 3min. The same thing when just install some software, like apache2 or mc. It takes to much time (for mc it takes about 1 min on jessie, about 30sec on wheezy). The same with reloading. It takes about 1min. Situation is the same on both jessie 3.4.109 and 4.2.3 Tried the same with Banana PI. The same thing. I use the fastest SD card. …

Hi, Thanks to this great project I sucessfully installed armbian on my cubietruck and moved the installation (Vanilla Jessie) to a hard disk. Now I want to move the remaining SD parts (obviously only /boot) to another (much smaller) SD card. Creating a partition and copying the stuff 1:1 does not work (leaves the new SD card unbootable. How to achieve the above? Thanks Thom

Hallo, I have armbian 3.4.109 (Jessie) on a cubietruck. It is connected to a Motorola Lapdock. I have the problem, I could not change the resolution (xfce 4) from 1920x1080. Tried following steps: xrandr output: Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080 default connected 1920x1080+0+0 0mm x 0mm 1920x1080 60.00* error Message: Failed to get size of gamma for output default cvt 1280 800 output: # 1280x800 59.81 Hz (CVT 1.02MA) hsync: 49.70 kHz; pclk: 83.50 MHz Modeline "1280x800_60.00" 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync When I try to add new entry with xrandr, I always get error messages. Once th…

Will cryptsetup (missing crypto modules), and USB audio (or the onboard analog audio) work on vanilla kernel?

Hi all, I try to compile the driver mt7610u from TP-Link AC600 Archer T2UH USB on BPI-M2 and i have this error: root@bananapim2:~/mt7610u_wifi_sta_v3002_dpo_20130916# make clean && make cp -f os/linux/Makefile.clean os/linux/Makefile make -C os/linux clean make[1]: Entering directory '/root/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux' rm -f ../../common/*.o rm -f ../../common/.*.cmd .*.flags .*.d rm -f ../../os/linux/*.o *.ko *.mod.o *.mod.c rm -f ../../os/linux/.*.cmd .*.flags .*.d rm -fr ../../os/linux/.tmp_versions rm -f ../../os/linux/Module.symvers rm -f ../../os/linux/Modules.symvers rm -f ../../os/linux/Module.markers rm -f ../../os/linux/mo…

Hi, I have the following problem when a extern USB disk is connected the Banana Pi won’t boot., if I unplug the USB disk the Banana PI boots from the SATA disk fine. I’m using debian jessie and use the nand-sata-install to boot from SATA disk Kind regards,

Hi, I read about the Allwinner Security System Cryptographic Accelerator. Is somebody actually using it with cryptsetup or OpenVPN? Is it powerful like Intel AES-NI? Thank you! Kind regards, matt

hi! I update kernel for cubie a10, bud do not know how tu update boot loader. As i know boot loader used uboot. In 1st part of microsd i have files drwxr-xr-x 3 root root 1024 Jun 18 2015 . drwxr-xr-x 5 root root 4096 Jun 12 2014 .. -rw-r--r-- 1 root root 12288 Jun 18 2015 .uEnv.txt.swp drwx------ 2 root root 12288 Nov 17 2014 lost+found -rw-r--r-- 1 root root 44240 Nov 17 2014 script.bin -rw-r--r-- 1 root root 215 Jun 18 2015 uEnv.txt -rw-r--r-- 1 root root 6544616 Nov 17 2014 uImage As i understand i need change uImage file. Ok. I goint in /boot And export VERSION=4.3.3 mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -…

Hi, yesterday I moved my root partition to a 128GB SSD by running "nand-sata-install" Everything works fine. Now I got a SD-Card in my Banana Pi with one big partition: fdisk -l Disk /dev/sda: 128.0 GB, 128035676160 bytes 30 heads, 63 sectors/track, 132312 cylinders, total 250069680 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93d6d043 Device Boot Start End Blocks Id System /dev/sda1 2048 250069679 125033816 83 Linux Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes 46 heads, 9 sectors/track, 18706 …

Update: checking download file, it seems that I downloaded Armbian_4.5_Cubieboard2_Debian_jessie_4.2.3.zip so it's not 4.81 no matter what the download pages said. I'm trying to install upstream kernel on Cubieboard 2 and kernel never starts. Attached is output from boot (I'm getting same on serial port). I did try different sdcard (to rule out problems with it) but I'm worried about ext4fs_devread read error and partition error. Is there something more that I can try? Legacy kernel works well, but I wasn't able to just upgrade kernel and u-boot on it, but that resulted in unbootable system -- which packages I have to install to migrate from legacy to upst…

Hi all, A week ago I started using the latest Armbian image (Legacy Desktop) for my Olinuxino A20L2. Since the switch from the Olinuxino A20 original image back to Armbian I noticed a lot of performance loss. Especially when surfing the web through Firefox on even simple pages is sometimes terribly slow. Anyone have an idea how to solve this?

Hi, my installed version is about a year old at least...so I'd like to upgrade without loosing settings and data. Is this possible? If yes, how? In doc. there is only decribte how to update the kernel, nothing else... Thanks, Astro System says: root@cubie:~# cat /etc/issue Debian GNU/Linux CT Debian 2.7 wheezy root@cubie:~# cat /proc/version Linux version 3.4.104-sunxi (root@cubie) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Fri Sep 26 18:30:39 CEST 2014

Is there any documentation related to patch integration in building process ? i see a folder userpatches but no doc associated with it. I need to build the aufs kernel module for docker on my olimex A20 lime2 and have no idea of the process. What i curently do is: > force 4.2.6 kernel version in next (same as my curent armbian image for my lime2) > start the building process > checkout aufs standalone for 4.2 in kernel sources folder > patch the kernel with aufs support > manualy reconfigure kernel with the arm toolchain to enable aufs integration as module > manualy build module with the arm toolchain > put the module on my lime2 and config…

Hi! Happy new year! Recently, I experienced a strange date problem on my Cubitruck. After a reboot or a powerdown/powerup the date is set to Jan, 1 1970 00:00:00 UTC (aka epoch). As far as I can see the RTC is working. ntpd is enabled on my Cubitruck. (Since it runs its own nameserver with DNSSEC, DNS resolving isn't working if the date is set to epoch. So ntpd can't reach any NTP server.) I'm running a vanila kernel with Debian Jessy (8.2): Linux vaili 4.3.3-sunxi #3 SMP Mon Dec 28 11:27:16 CET 2015 armv7l GNU/Linux Setting the date after a reboot and powerdown/powerup was working some time ago. After a few updates of the system image it wasn't an…

Hi every body, Tanks igor for your great job with your linux versions for cubietruck. I installed jessie with kernel 3.4. I'm trying to make a media server with minidlna. Cubietruck is connected to the router with ethernet when i'm at home and minidlna stream fine. I sucessfully installed hostapd with your interfaces.hostapd file. Ethernet plugged, i can connect to wlan0 and access to minidlna. My problem is when ethernet is unplugged and i reboot the cubietruck. I cannot access to minidlna via wlan0. I set network_interface=br0 in minidlna configuration. Do i need to manually configure dhcp or something like that?

Hello , I have setup a banana pi with armbian: Linux bananapi 4.3.3-sunxi #3 SMP Mon Dec 28 11:27:16 CET 2015 armv7l GNU/Linux I wuld like to setup a wifi access point from a rtl wifi dongle. Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter First, I have tried with bananian and it was working perfectly. But I have also a tv adapter not working with bananian, kernel 3.4 seems not support it. With armbian vanilla, the tv adapter is supported but it seems to have an issue with the wifi dongle driver. When I start hostapd-rt, I have the following errors: drv->ifindex=5 l2_sock_recv==l2_sock_xmit=0x0x766b0 ioctl[SIOCSIWMODE]: Invalid argument Co…

Hi (and happy new year everyone!), I recently put a SSD in my Cubietruck and installed the Cubietruck Vanilla Image (with Kernel 4.x) on it. This is working fine, but what bugs me is the fact that I still need to have a microSD-card installed. As far as I understood, the bootloader cannot directly boot to SATA (missing drivers). How does the bare Image on the microSD-card achieve this? And even more important: How can I move the 'important' part (which does the bootloading and SATA drivers) to NAND so I can boot without a microSD-card installed? Thanks in advance!

Dear all, I copied Armbian 4.5 (on cubietruck with kernel 4.3.3) from SD to SSD using the script "nand-sata-install.sh". The resulting system with /boot from SD and rootfs on SSD works fine. However, the "Welcome to Armbian" message generated upon login contains the error message "df: cannot access ‘/dev/sda1’: over-mounted by another device" (see below). It seems to be related to mounting /boot from SD. Do you have any suggestions how to get rid of the "df: cannot access" message ? ____ _ _ _ _ / ___| _| |__ (_) ___| |_ _ __ _ _ ___| | __ | | | | | | '_ \| |/ _ \ __| '__| | | |/ __| |/ / | |__| |_| | |_) | …

Hello there, I belong to the group of users that bought a BPi-M2 to just find out that hardware is nothing without software support. First, to my background: I do spend a lot of time at my computer using both Windows and Linux, but I am not a Linux guru. I used to configure and build kernels several years ago, at the time, when we used LILO to boot Linux. My field of interest is real-time sound processing, based on complex filter banks (ideally implemented using multi-threading). For a current project I needed something small, powerful and easily programmable. Since the BPi-M2 has 4 cores and built-in microphone, it seemed ideal for the first tries. Anyway, I…

I'm using latest armbian with kernel 4.3.3 and got some problem: I have some usb-drives that should be mounted at boot via fstab. But sometimes they are not mounted at boot, after restart they mount normally. Never had problems with same fstab, only with kernel 4.3.3 it sometimes failed to mount. Seen same behaviour with bananian with 4.3-kernel, so maybe it has to do something with this kernel? Maybe some usb modules didn't load before mounting fstab? But i'm linux noob, so i dont know what i can do... Some suggestions?

Hello and thanks for the good work and support with these images. First, excuse my bad english, it's not my native. And i am a little rookie and a little noob, so sorry if i write crap and don't understand basics some time. Recently i've try to install desktop on this board and hardware accelerated driver with partial result. I had Armbian_4.5_Lamobo-r1_Debian_wheezy_3.4.109 with installed Gnome. I install Gnome following this site: https://www.namhuy.net/1085/install-gui-on-debian-7-wheezy.html Then i started to install and configure stuff based on sunxi site. First libUMP tnen this: http://linux-sunxi.org/Mali_binary_driver "make test" didn't do anything - can't cr…

Hi all, I have on the board the AP6181 Wirelesss (brcmfmac_sdio). I try use like AP and works, but isnt work Karma, mana and monitoring.... Somebody know some patch or driver to make this work? Or i need to find an ARM board with atheros or ralink?? Because i never find one!! Thanks

Hello community, Kernel 4.3.x should have support for DMA engine on A20 boards, see: http://linux-sunxi.org/Linux_mainlining_effort#Merged_into_4.3 Does / should this also improve the SATA write performance? After update to kernel 4.3.3 from apt.armbian.com I cannot see any big write Performance increase... thanks for comments... best regards and a happy new year... holsteiner

Last night I was digging through the logs, and i found an error msg that said that I was over clocking the board without without heat protection. Couple of Questions: 1 I don't have a heat sink on the CPU, do I need one? 2 I haven't done anything to the CPU speed, and running Wheezy and Jessie off of different SD's. Is overclocking turned on in the release? It is really cold here in the high Desert, right around freezing for 4 to 12 hours every night. Not as cold as northern EU, but cold. The room temp is probably 60-65 degrees F. I have the Micro in the Micro case from Olimex. Does the processor need a heat sink? thanks in advance Mike

As tkaiser would say, Lamobo-r1 has terrible design but the concept is good (multiple usage possible: network, misc services) But let's be honest, perfection is when you are dead. Like sleeping & coffee some weeks ago, I was wondering (right or wrong) if a DMA config for the lamobo-r1 GMAC would help the bandwidth issues. One CPU core is 100% with all the gazillions of interruptions to handle. Now the DMA for A20 is in the mainline kernel but I am missing some tech glue. I have read an example in the kernel 4.3 doc with DMA config (DTS) for DWMAC (*if* applicable, not only for STMMAC, but also for A20-GMAC ???) links: stmmac kernel 4.3 documentation d…

Hi, I'm trying to get pygame working on Banana Pi / Banana Pro (with LVDS display) using the armbian 4.5 CLI images, but I'm unable to succeed (I think I'm missing fbturbo). I tried to install the basic desktop following armbian guide, but pygame still is not working. A little help on this one would be very appreciated, thanks !

Just noticed some ugly detail: 1.) the switch is active during boot, and it defaults to all ports on one VLAN. 2.) My laptop is quite agressive when it comes to DHCP, it's connected to one of the local ports of the BPI-R, so it detects immediatly that the ethernet connection goes down and up. 3.) So I end up with the cable modems external IP address on my laptop, and a BPI-R that is unreachable, ... Any idea how to turn off the network switch in the boot loader? TiA, Andreas

Hi! I have recently installed Armbian 4.5 (Debain Jessie and Ubuntu trusty) at Banana Pi M2, and I’ve noticed that the computer doesn’t reboot after the command. It simply switches off, and the red diode lights up. How it could be corrected?

I live in the desert in California and the only Internet access I have is using PDANet on my phone. Is there a way to build an SD Card using rufus (which is a great app by the way) that I can use to load LXDE on my Olimex Micro? Once I get the desktop loaded I will get PDANet working on Olimex, but this seems like the lessor of two evils. I have both Jessie and Wheezy working and I'm still running off of the SDCard's. I have SSH working in both versions if that helps. thanks in advance. Mike

You know in Waynes World when the boys went to the Alice Cooper concert and got to meet Alice Cooper (they were his biggest fans)..... All they could say was "We're not Worthy.... We're not Worthy". That is the way I feel after downloading and installing the Jessie version of Armbian for my Olimex Micro. My hat is off to you.... Great Job!!!! It blows that awful SD I got from Olimex away..... I really want to see your desktop now.....

Hi There, I hope I posted this in the correct forum. We run a lot of distros on a given "disk" or "sdcard" (or whatever). We call our system "Boot-Crazy". Here goes: The partition starts with a small boot partition containing the initial boot parameters, configuration, and a pointer to the partition holding the root file system we want to boot. The boot partition is followed by some number of other partitions, like this: [bOOT]-[sWAP]-[COMMON]-[COPYOF-DISTO-1-BOOT]-[DISTO-1-ROOT-FILE-SYSTEM]-[COPYOF-DISTO-2-BOOT]-[DISTO-2-ROOT-FILE-SYSTEM]... Armbian (as downloaded for the BananaPi-M2) is simply one large partition, like this: [armbia…

I have downloaded http://mirror.igorpecovnik.com/test/Armbian_5.00_Bananapi_Debian_jessie_4.4.0-rc5.zip and tried OTG, as I though that it´s support was added in kernel 4.3, but it is not wokring. Is there a way to enable it? I am missing this feature, yet I do not want to go back to legacy kernel. I tried various usb peripherals and hubs, but OTG port is not powered. Thank you.

Hello On my Banana PI infrared receiver is not detected at bootup. I'm running armbian 4.7 jessie. The only /dev/input device is that of axp20x-pekj, which I undestand to be a power controller. My issue is similar as found in this thread: http://forum.armbian.com/index.php/topic/475-bananapi-r1-no-infrared-device/ Except ofcourse the board is different From the other thread I gather I need to change something in regards to dtb-s, but I guess as the boards are different using the same one as mentioned is not a good idea.

Hi, I try to run Armbian 4.5 (Bananapi Ubuntu trusty 3.4.109 desktop) on my Banana Pi M1+, but after the "Starting kernel..." prompt the monitor show only the "No signal" warning. (I connect the Banana Pi to my monitor with HDMI - DVI converter, I will be able to try it with single HDMI cable a few days later.) However, it boots. I have a lot of tries to change the boot.cmd and the banana.bin, but I didn't achieve satisfying result. The result of dmesg: [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.110-sun7i (root@production) (gcc v…

Hello guys, This is not a question, but a feedback I think may be useful for some. I have a cubieboard 2 server application using Igor's armbian running for 8 months in several places (~40 installations). In my application: The OS in installed on NAND Armbian 3.8 + wheezy + kernel 3.4.107 There is a postgresql instance running, writing approx. 25kB/s average (not constant) Ordered data mode journaling on From time to time I've problems on clients with system corruption (not only the database, but the whole filesystem - sometimes I couldn't event boot the cubieboard anymore, had several kernel panics and more weird stuff like thousands of filesystem errors at o…

I know that the ILI9341 lcd are supported natively by armbian... But, now that i have received the lcd ordered some time ago: http://www.ebay.com/itm/311058563993 I'm trying to guess how i'm supposed to wire it to the cubietruck headers. Which are the pin numbers originally assigned to work with this lcd? Which are the correct options to load fbtft? I have digged around a little bit, but i can't find any working example.

Hi Igor, while playing with your Armbian and kernel to squeeze even more juice from my cubietruck, i would ask you if you think it would be possible to add to your kernel and u-boot build the support for KVM. Here one experiment with KVM: https://rwmj.wordpress.com/2013/12/13/kvm-working-on-the-cubietruck/ Then, partially related with this, it would be nice to have the watchdog enabled to fight the occasional low level hang that happens sometimes (all freezed with 4 led on).

Hello, I download Ubuntu Trusty for my orangepi PC. It's working fine. But the pointer for the mouse on the desktop is missing. And with command line (Alt-F1), the last line is under the screen. How to fix these two poins ? Regards

Hi, First of all: Thanks for the great work. I have installed the Armbian_4.5_Cubietruck_Ubuntu_trusty_3.4.109_desktop image and it runs smooth so far. After a while beeing idle the monitor goes black as it should, but the cubie doesn't wake up on mouse or keyboard entry. The only thing working is a reboot. Also I'd like to know, how I can deactivate the Micro-USB port. If I remember it right, this is responsable for the low volume high pitch noise. Thanks for all your responses. kauppi

Hello guys, I tried to install the title flavor on my Cubietruck and it seems that it does not see the nand at all in the /dev/ side, if i try any other flavour i can see the nand and do the install but not on those versions . Any ideas ? Thanks

hi all, i have a doubt about cubieboard3 and cubietruck 3.4.104-sunxi. Tipically use this board with network and SSH , but sometimes i need attach monitor VGA and sometimes monitor HDMI. Now work only VGA, HDMI never works. my /boot/cubietruck.fex is: [disp_init] disp_init_enable = 1 disp_mode = 0 screen0_output_type = 4 screen0_output_mode = 4 screen1_output_type = 0 screen1_output_mode = 4 fb0_width = 1024 fb0_height = 768 I can setup output cubietruck autosense? regards

So continuing from this thread since i dont wanna threadjack im facing a simular issue using this image used rufus instead of suse imagewriter since its defunkt on windows 10, have tested the sdcard with 0 errors took about 3 hours to do so since im using a 32gb card for my server. Warning: Only 30418 of 30419 MByte tested. Test finished without errors. You can now delete the test files *.h2w or verify them again. Writing speed: 5.57 MByte/s Reading speed: 8.19 MByte/s H2testw v1.4 So same scenario as the ubuntu distro Found U-Boot script /boot/boot.scr [ bytes read info ] ## Executing script at 43100000 ** File not found /boot/.next ** ** Unrecognized filesystem type…

Hi @Igor you should consider changing imagetool when you ship your image files since the Suse image tool is quite broken on Windows platforms 8 or higher since its often just gives a blank non function interface that crashes upon pressing buttons. Perhaps Rufus would be a better alternative

SND_USB_AUDIO seems now disabled in Vanilla Kernel. Probably after this commit: - https://github.com/igorpecovnik/lib/commit/70231cf8ae641650ec8601124db33b5b186a285b This should be why my USB dac doesn't work anymore after an update of the system. Is there any reason or it's only an error? I must thank you Igor for your work.

Hello, I am using for the first time a cable Neuftech PL2303HX I was looking @ lamobo-r1.fex file and cannot figure out which pins are the default uart for boot-up (not skilled enough yet) both links mention P13 as default, but I cannot get any messages from USB-uart cable (double checked UART RX & TX + ground) http://linux-sunxi.org/Lamobo_R1 http://www.bananapi.com/index.php/component/content/article?layout=edit&id=59 Thanks!

Hi Igor, is there a reason why the "killall" binary is missing in /usr/bin? Some of our applications use this file to kill servers... Can you add it in the next version? Thanks. Steffen

Hello, with 3.4. kernel I could use my csi-cam on my R1: #5.0 Mega Pixel Banana PI Camera Module for Android #and Linux. OV5640 chipset, CSI connector #Price: US $24.00 / piece from aliexpress sudo modprobe ov5640 sudo modprobe sun4i_csi0 #video stream #mplayer tv:// #snapshot mplayer tv:// -vo png -frames 1 Now I switched to armbian 4.7 with 4.2.6 to use new wifi-usb-drivers but I saw that those modules are not supported in the new kernel. :-( Source of drivers: https://github.com/LeMaker/linux-sunxi/tree/lemaker-3.4/drivers/media/video/sun4i_csi https://github.com/LeMaker/linux-sunxi/blob/lemaker-3.4/drivers/media/video/sun4i_csi/device/ov5640.c Did a…

I had successfully installed openCV for armbian using instructions from this page: http://www.pyimagesearch.com/2015/10/26/how-to-install-opencv-3-on-raspbian-jessie/ I also highly recommend Adrians's openCV tutorials. happy openCV-ing Mladen

Hy, I use Cubietruck / Armbian I have a problem with I2C connecting to an Arduino. my Python program returns me an error when I use the SMBus module : read_byte_data the function (address, reg) bug while writing functions work well. here is my Arduino code : #include <Wire.h> #include <LiquidCrystal.h> #include <string.h> #include <ctype.h> const int RS = 12; const int E = 11; const int D4 = 5; const int D5 = 4; const int D6 = 3; const int D7 = 2; LiquidCrystal lcd(RS,E,D4,D5,D6,D7); #define SLAVE_ADDRESS 0x12 byte regs[3]; int regIndex=0; byte lastExecReq = 0x00; char message[20]; void setup (void){ regs[0] = 0x00; regs[1] = 0x00; …

I've got a new problem with my Olimex A20 Lime2 board. The board doesn't freeze anymore (http://forum.armbian.com/index.php/topic/295-freezing-problem-with-olimex-a20-lime-2/) but after a week I've got a very slow speed using samba: about 300 kbps. I've tried to restart the smbd service but it doesn't work. The smbd process don't use cpu: < 5 %. If I restart completely the board, samba start to works again very fast and use the cpu: > 50%. How can I discover where is the problem and how to fix it? I'm using Debian jessie 4.2.6-sunxi, and there are no more updates.

Hello! I'm trying to make image for olinuxino lime A10. Prebuild image does not have /dev/uinput and /dev/hidraw for my touchscreen, and built without CONFIG_DRM_KMS_HELPER, so i can't replace broken EDID for my HDMI display. A month ago i succesfully build ubuntu image with uinput and hidraw support. But now - i need to rebuild it again, but kernel compilation fails with this error: LD drivers/media/usb/built-in.o LD drivers/media/built-in.o make: *** [drivers] Error 2 [ error ] Kernel was not built [ @host ] And I don't know where to find error description. The last error was missing libssl-dev. Regards.

Hello Igor! Please help. What am I doing wrong? My device: LeMaker BananaPiPro (black board with yellow GPIO). http://www.armbian.com/banana-pi-pro/ Your build: Debian jessie Legacy Kernel 3.4.109 uname -a Linux bananapi 3.4.109-banana #5 SMP PREEMPT Wed Sep 30 14:20:25 CEST 2015 armv7l GNU/Linux I need the following: 1. Install light gui (i were install xfce4 (+goodies) + lightdm) 2. Internet browser (i use iceweasel) 3. On-line film and serials from internet 4. Sound from HDMI (bananapipro connect to my tv) The items 1, 2 and 4 - No problem. The item 3 - Very poor quality video. What has been done: http://linux-sunxi.org/Mali_binary_driver http://wiki.lemaker.or…

hi! I'm running vanilla cli-version of armbian v4-2 on my olimex lime2. However, decided to run it from a sata-attached hdd to improve speed and durability. the procedure i used is descibed here (and got a lot of help from the creator of the website, thanks!): http://papermint-designs.com/dmo-blog/blog.php?id=3, but i will shortly sum up what i did. flashed the sd with armbian cli image 4-2 let it reboot for it to use the whole card created a 10gb partition for rootfs and swap on the sata drive changed fstab to mount the rootfs on the sata (removed everything but defaults and noatime because system booted in ro-mode otherwise while running from hdd) : #/dev/…

Hi, I used Armbian_4.5_Cubietruck_Ubuntu_trusty_4.2.3 as sd card image. Later I moved it to a sata connected ssd and upgraded to 4.2.6 kernel. As I needed a second drive I bought a : StarTech.com USB 3.0 to 2.5†SATA III Hard Drive Adapter Cable w/ UASP – SATA to USB 3.0 Converter for SSD / HDD This usb to sata works fine with the ssd. The second drive is a 5v 2.5†SATA and the usb current is not enough so it is connected to the sata on cubietruck. On the second usb i have connected a usb to ethernet adapter. Trying to boot results to kernel panic (& something about no init) and cubietruck reboots. I am wondering if I need to change anything e…

Hi! The jessy vanilla image works fine, but when I boot the Olinuxino Micro with a SATA HDD connected, I don't have ethernet/ssh access anymore. Even reboot _without_ the HDD doesn't work, I need to restore the content of /boot with an SD-card-reader to make it work again. Sorry, I am (yet) not really into sunxi/uboot/kernel topics, so maybe there's a simple explanation to this behaviour?

I have root partition on SATA drive (/dev/sda1). I tried to use vanilla kernel, but it doesn't boot and even doesn't show HDMI output (I set root=/dev/sda1 in boot.cmd and recompiled boot.scr of course). But the legacy kernel with the same configuration works. Any suggestions why?

hi there, i was setup linux-wheezy-root-cubietruck 4.2 on cubietruck nand.these days i upgrade system it show me a error message: Unpacking replacement linux-wheezy-root-cubietruck ... dpkg: error processing /var/cache/apt/archives/linux-wheezy-root-cubietruck_4.70_armhf.deb (--install): unable to make backup link of `./boot/bin/lime.bin' before installing new version: Operation not permitted Errors were encountered while processing: /var/cache/apt/archives/linux-wheezy-root-cubietruck_4.70_armhf.deb i thik this is a bug because dear developer don't think about when system install to nand later some problem. how to fix? thanks!! 估计用CT的很多是…

Hi Back in February '15 I have started to write an instruction about the setup of a BPi-R1 (Router). In the threads of the Forum, the information is scattered and it takes so much time for each to get along. So I thought such a document would help to become not only faster, but to achieve a better result as well, as you can faster spend time with the device and tweak it. My know how is getting better, but things are still missing. If you like to help the 'community' with your know how, please leave comments in the document if you find errors or you find something missing. Google Docs Thank you in advance - for your support Cheers Tido