Allwinner sunxi

Hello there, I was looking at the gc2035 camera sensor for the orange pi device. I want the camera module to load as fast as possible and take pictures as fast as possible. When I use a USB camera, it takes 2-3 seconds to load the module and activate the camera, and the camera takes 2 seconds. I'm thinking of compiling the GC2035 camera statically to the linux kernel. But I'm not sure how much time decrease. What I would like to know is, how fast is the camera taking pictures and how long is the loading time of the camera modules? Can I take pictures under 200 ms with the camera triggered? The Raspifastcamd module allows …

Hi, I use OPI0+. Bluetooth works well when using WiFi as a client. In access point I got an error like"Invalid command" "ConnectionAttemptFailed". Is there any way to fix it?

hi Both the last img based on ubuntu for orangepi 2 and orange pi plus E doesnot run. LED doesnot light. Normaly i used old armbian img based on jessie 5.25 ( plus E ) nad 5.05 ( orangepi 2 ). It works. I download the new ones but nothing happend - black screen only...

Hi all, I have prepared a c++ app on a VM Ubuntu desktop and need to transfer it and test it on Cubietruck Cubieboard3. Apart from the default code I also link my c++ app to extrenal shared libraries , like poco and boost. Since I'm quite new on embedded systems and boards especially, if I choose to boot the Ubuntu desktop version armbian is offering, do I have to build these external libraries from scratch? Thanks in advance

Hi all. I just want to apologize for my English, I write everything through a translator. Can you please tell me how to turn on the TV output now? Previously, this was done via /boot/script.bin

Hi, I've decided to make a fresh install on a bigger SD card using Armbian 22.05 Bullseye on my Opi PC+. The aplay command doesn't output any sound, and alsamixer show the card is H3 codec. I don't know if the sound is output to the HDMI port or any other problem. Anyone could help ? Than you

Hey All, I moved my armbian OS from OPI H5 Zero Plus2 to OPI H5 Zero Plus (the one with the LAN), the WiFi is working perfectly but the LAN is not recognized, nor i can find any sign on dmesg or boot (but its there, i see it). ifconfig and ifconfig -a show only the "wlan0" and "lo". I am using ARMBIAN 5.64.181015 nightly Ubuntu 16.04.5 LTS 4.14.76-sunxi64 with (armbian-config for Zero Plus 2) As it took me pretty much time to spin-up the OS, i would like to avoid burning a new OS. Is there a way to activate it or add/build it drivers? Many thanks

Hello, I'm trying to setup and access point with an orange pi zero. Note that the internal wifi card is not used and an 802.11 ac usb key is used. Hostapd boot up fine and mobile phone can connect to AP. Howover after few second the orange pi complety stop responding and the serial console loop with these message : [ 264.167603] unexpected IRQ trap at vector 00 [ 264.171871] unexpected IRQ trap at vector 00 [ 264.176140] unexpected IRQ trap at vector 00 [ 264.180409] unexpected IRQ trap at vector 00 [ 264.184678] unexpected IRQ trap at vector 00 [ 264.188946] unexpected IRQ trap at vector 00 Any …

Hi - is there anywhere a working guide to create a Wifi Access Point with this board ? I have tried the official debian ISO from orange pi and doing so with create_ap is very easy. I'd like to use armbian instead but using the "Minimal / IOT image with Armbian Linux v6.6" (bookworm) all I get is hell: I installed network-manager and armbian-config then used the later to try the hotspot configuration but then (several freezes and reboots after) it complains that "Unit hostapd.service is masked" and when I solve that, then dnsmasq fails and I see no helpful error message. I even tried connecting to a wifi network first before trying hot…

Hi to all, I am using a cubietruck as an alarm camera detector with eyeone, but now i want to have new life for it ... Is it possible to output from vga a 15khz CRT signal to connect to a CRT tv 384x224? Thanks for all...

i downloaded the desktop for opi one and on first boot it wants me to change password but gives error msg and doesnt take new password

I am searching for an LCD 10 inches or above that works with the LCD connector on the Orange Pi Win Plus A64. Does anyone know of one that works and can you provide a link to it so I can purchase and use it? Thanks.

Hello, We have our A20 machine with a sdio wifi device Realtek 8723bs which is not included in the current kernel's modules, then when we try to cross-compile them in a PC it fail requiring kernel version 3.19 or later, i think mainline kernel could be a way to go or upgrade 3.4.x to 3.19.x, but some text claim unsupported nand in mainline which is required by the project and don't know the correct way to make it go to 3.19 in sunxi allwinner scenario. What do you think is the best way to make it work better, any clue please? Thank's in advance Daniel

Hi, sorry for my english. I have an orange pi plus 2 and i try to turn it's wifi module on ap mode. I install hostapd et and set config lines in /etc/network/interfaces. After reboot the OPI can't finish the starting. I mean it's boot and one second after login line appear, the screen display lot of lines and it reboot again. What can be the problem? Any help? PS: The system is Ubuntu server installing on EMMC. My power supplie is 5V - 2,5 A (So i think it's not a power issu).

Hello everyone. I'm experiencing some strange issue with my cubieboard and its connection to the internet. I boot it up and it works correctly, but after a day or two, I can't communicate with it using a ssh program, or vnc viewer. My other two servers that uses Linux Mint is working normally, so I think the problem is not my router. (I even swapped the Ethernet cables between my servers). If I connect a display on my cubieboard and try to ping my Windows computer, then I'm able to ssh my cubieboard using my computer. Sometimes I'm unable to connect to my cubieboard via ssh using my windows and my Android phone, but if I try using my Linux machine, I can connect with…

We have deployed the zero for an integrated MCU on one of our products, and in rare occasions we are experience random lockups of the MCU (possibly related to overheating). Its pretty much impossible to debug this since it happens very rarely, but we are trying to mitigate all possible causes. The MCU is controlling a bigger and more expensive board and a fan. If there are internal failsafes that are being triggered by the MCU and locking it up (like temp) we want to disable as many of them as possible (we would rather have the MCU burn up than our main board). Anyone have any insights on orange pi zero OTP or OCP in kernel or uboot parameters we can disable?

Hi guys! I have a 2Mp webcam connected to OPi zero H3. It nicely works with mjpg-streamer and web-server, but stream is only about 10-12 FPS with 1280*720 resolution. After running "armbianmonitor -m" cpu load is only 26-27% Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 19:32:15: 1104MHz 0.05 13% 0% 11% 0% 0% 1% 27.7°C 0/7 19:32:20: 1104MHz 0.12 26% 0% 26% 0% 0% 0% 27.6°C 0/7 19:32:25: 1104MHz 0.19 26% 0% 26% 0% 0% 0% 26.7°C 0/7 19:32:30: 1104MHz 0.26 28% 0% 26% 0% 0% 1% 28.3°C 0/7 19:32:36: 1104MHz 0.32 27% 0% 26% 0% 0% 1% 28.1°C 0/7 as i can understand, board now runn…

Hi. I want to build a full RT legacy kernel using RT patch 30-real-time143-full-plus-rt-fixes.patch (option 5) for my Orange Pi One. While building I got the error at this line /sun8i/security/apparmor/sid.c#L28 static DEFINE_SPINLOCK(sid_lock); security/apparmor/sid.c:28:28: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘__cacheline_aligned_in_smp’ static DEFINE_SPINLOCK(sid_lock); ^ As seen in the patch file, top line's macro must be translated to static spinlock_t sid_lock __cacheline_aligned_in_smp = __SPIN_LOCK_UNLOCKED(sid_lock); ^ But at this moment I got the er…

Good day! I connect the real time clock, made according to the instructions: RTC time is set I set the wrong time in the RTC, reboot. I look at the time in the system clock - at first not the right one, from the RTC, then they are synchronized and it becomes the right one. But in RTC, the new correct time is not recorded. What am I doing wrong? Or what else needs to be done?

Hello guys, I trying to make my ili9431 to show early stage of boot console. Everything works great if I load from /etc/modprobe.d/fb_ili9341.conf but if I load from armbianEnv.txt nothings happen. I suspect that I am trying to load the device before the driver is loaded. I read about "platform file" here: https://github.com/notro/fbtft/wiki/Boot-console but I have difficulties modifying the files because the guide is for RPI. Can someone guide me or at least to know if I'm on the right track? Hardware details: Device: Orange PI Zero Plus2 Kernel: Linux orangepizeroplus2 4.14.83-sunxi …

Hi Everyone I have a small problem, I recently purchased a OrangePi Zero and wanted to run Armbian on it, I downloaded the last stable release 3.4 (Debian Jesse) and prepped my Adata 32gb with Etcher same way I did my Opi Lite, and placed it in the Opi, and nothing happened , it doesnt boot up at all if I apply power (I can see both ethernet leds but not the power LED) I disconnected it and connect my Uart cable to the Zero and confirmed there is no output when you power it on, I then tried the Xenial build and still nothing, I downloaded the latest nightly 4.9 and Boom ,works like a dream I get output via Uart and can use the terminal to configure it. My Problem …

Hello all, just new to here, I bought an Orangepi PC board and grabbed lastest Armbian pre-built image with legacy kernel. I test my code that dynamically change the HDMI output resolution, by something like this: ioctl(disp, DISP_BLANK, true) ioctl(disp, DISP_DEVICE_SWITCH) ioctl(disp, DISP_BLANK, false) and then update fbvar by ioctl(fb0, FBIOPUT_VSCREENINFO) I can see output actually changed, everything goes well until I try to map framebuffer from /dev/fb0, it failed with errno EINVAL. After check drivers source code I think it's because the display driver, it forget to notify the system to update framebuffer parameter…

I use Orange Pi PC+ with installed Armbian 21.08.3 on eMMC. On system i can't access to mmcblk0 device. In dev directory exist only mmcblk2* files related to eMMC. How can I enable access to the SD card ?

when i triaing change monitor in NANO PI M1 from HDMI to DVI ( H3disp 1080p ), then i cannot start system in a DVI monitor. After changed HDMI monitor is also blocked. Then you have to delete into another computer in sd card your scirpt bin file and rename script.bin.back to script.bin to return to HDMI monitor. DVI does not work at all . maybe it is producer error not software.

I recently bought an Orange Pi Lite and installed Armbian on it. Everything works fine except I can't write to USB drive. I'm not logged in as root. USB mounts automatically but other users can't seem to write to it. I searched this issue on the internet but could not figure out how to change permission as this is the first time I'm using a Linux machine. Any help would be greatly appreciated. Below is what I see when I open up USB properties. Thank you.

Hi , I am trying to install headers on my orang pi using command #apt install linux-headers-$(uname -r) getting the following message Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-headers-5.4.27-sunxi E: Couldn't find any package by glob 'linux-headers-5.4.27-sunxi' E: Couldn't find any package by regex 'linux-headers-5.4.27-sunxi' could someone help me in how do I install headers ?, I am trying to comiple a kernel module. thanks

Hi All, I am trying to enable HID gadget on Banana Pi M2 Zero with latest Armbian OS for it. I followed the instructions in following link,but no luck: Switch USB port from OTG to HOST mode I get modprobe: ERROR: could not insert 'g_hid': No such device when I enter modprobe g_hid. I appreciate any help. Thanks

Hello all! I'm running armbian on a cubietrack wich I use for transmission and samba purposes. The Cubietrack is always on, and today I realized that was responding to ping but I couldn't log with ssh. When I restarted the system it hanged on this screen: The Cubietrack have ping response, but can't do anything. Any ideas? Thank you!

Hi, my 1st post here. I have serial over OTG between Win10 PC and Zero working, fine as long as I use it for console login. (serial-getty@/dev/ttyGS0. If I stop the getty service, No usb/com port is opened @ PC side, when I plug it. I still see the /dev/ttyGS0 on the PI (stty -F/dev/ttyGS0) but apparently the device is not opened to the external world. I would expect that any send command to the device would open it, e.g. ls > /dev/ttyGS0, but nothing opens at the Win10 PC. What does getty do, so that the PC discovers the new usb serial connection and what do I have to do to achieve a device opening on the PC, not using getty on …

Orange Pi Zero Plus2 H5 I currently am booting from the onboard 8GB EMMC. As I am still experimenting with this board, sometimes I would like to wipe and start from a backup remotely, keeping a copy of my backup on an SD card that's in the machine used for extra storage space. I use timeshift on my Mint laptop that restores a snapshot of / from an SDcard, but it is a graphical utility. Is there a similar CLI utility for Armbian? Or one that can be installed? Thanks.

I have gotten Oops a few times, now this morning I got it again I can see that is says "Segmentation Fault". I could still issue sudo armbianmonitor -u so I included those logs. Since I was also connected to both via SSH, where I was running "armbianmonitor -m" and logged in via serial I include the output of those windows below: SSH output: ... Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 00:56:54: --- 0.00 0% 0% 0% 0% 0% 0% 40.1°C 0/15 00:57:00: --- 0.08 1% 1% 0% 0% 0% 0% 40.1°C 0/15 00:57:05: --- 0.07 1% 0% 0% 0% 0% 0% 40.1°C 0/15 00:57:10: --- 0.06 1% 1% 0% …

Hi Everyone, Is there anything additional required to enable better performance improvements (kernel patch for TXTS and RXTS are set to 3 each see below link) on a Banana PI running Armbian V21 / V22 ? I have updated the bootloader, and OS, and the performance is still abysmally poor. Mechanical or SSD drive connected to on board SATA yields a whopping 2.7-10 MB/sec write speed using dd with a large block size, or with the iozone tool ~5 upto ~45 for larger block sizes. Still a very far cry from the ~120 after the kernel patch applied in ~2019 => https://forum.armbian.com/topic/10352-a20-sata-write-speed-improvement/ …

Hello I have an issue with my wifi, it's not reliable. There is no problem with my laptop, or any other devices on my network, but my NanoPi Neo is disconneted after a few hours. It can stay alive for an half a day, and after it become unreachable. As I have no other connection to my NanoPi it's a bit hard to establish what appens. But if I unplug the USB Wifi dungle, and replugged it the link come back. Doing a ping to the NanoPi, I see regular "Request timeout for icmp_seq" - every 20, 50 or 100 request, it depends - and sometime the request time is abnormally huge: serveral seconds. The config has bee done with nmtui, the…

Hello dear members, I have built complete mainkernel on orange pi zero. I compiled u-boot, busybox, mainline kernel, and obtained dtb file. So, my pure system is running now. But, I do not how should I continue? For example, how can use wi-fi, how can use gpio drivers and how can import some libs like wiring pi to my pure system. What is next for development? Best Regards.

Hi, After reading a post about NAS for allwinner, I need some advices: So far I have same performance on my raspberry pi b+ and my orangepi2e : 2 hard drives 2 To 2,5" usb on a powered hub. (approx 11 Mb/s max through AFP/nfs share). Gigabit does not seem to be the bottleneck on the pi since it does not impact my bit rates. My question is simple : can I have better performance if I make a RAID via btrfs ? Do I have to format my hard drives ? What is the best distro ? (I used armbian but does not seem very stable compared to the raspberry, what about ubuntu server, or raspbian ?) Thanks

I have noticed a very weird problem: connection works for some time (several hours or sometimes days) and then stops. Once it stopped working (connection between my mobile app and OrangePi) I have checked on the board: - ping 8.8.8.8 - OK - ping (router IP) - OK - ping (broadcast ) - FAILED - ping (PC or any other device connected to the network) - FAILED In all cases, Wireshark captures the ping requests. Once I tried to ping OrangePi board from my PC, I see in&out ping packet on OPI board by Wireshark. It seems like some lower layer or router (the same on two different) blocks the outgoing connection. Ideas? (WiFi power management off, no fir…

OrangePi Zero (512 MB) Power from 5V 2A supply, connection via Ethernet. Armbian_5.25_Orangepizero_Ubuntu_xenial_default_3.4.113 I am not strong on CLI so I have installed "lubuntu-desktop" and "gufw" and set them up. I also have NoMachine's Remote Desktop server installed, to share the Zero's virtual screen with my LAN. The project is to assess the Zero's ability to run a low volume mail server. So I have used the iRedMail script to install and set up the components of the mail server. It seems to be working - I have received the standard opening 4 emails OK. The problem lies with connecting to the Zero to find out what it's doing. …

Hello I am new in this forum, I need to configure A20-OLinuXino-MICRO 4G Nand board so that it has native vga output. As I can do, please, please, that any member of this forum can guide me.

Hello! I have: 1) Orange Pi PC+ with ARMBIAN 5.38 stable Ubuntu 16.04.5 LTS 3.4.113-sun8i 2) Orange Pi Zero with ARMBIAN 5.60 stable Ubuntu 16.04.5 LTS 3.4.113-sun8i 3) Orange Pi PC with Debian 3.4.39 #1 SMP PREEMPT Wed Sep 16 13:39:07 CEST 2015 armv7l On both ARMBIANs I have noticed: every start of arecord sets level on "MIC1 boost AMP gain control" audio setting with constant value 5. I think it uses value of "cap_vol=5" from section [audio0] from script.bin. On Debian it does not. In my case I need very very very low value of "MIC1 boost AMP gain control". Value of "ADC input gain ctrl" is alread…

I've got a fresh Orange Pi PC Plus 2 with the relevant Armbian loaded onto a new card. It seems to output just fine to HDMI on my workbench at home, using a relatively new monitor and a direct HDMI cable, but when I try other monitors I get inconsistent results. One is a Quimat 7-inch display that just shows a white backlight when connected to the OPi. However that display has issues with other boards so I'm not entirely worried about it. But the other display is a fairly modern ViewSonic monitor that exhibits a more confusing behavior. The monitor only has DVI/VGA so I'm connecting to it through a passive HDMI-DVI adapter. When I boot the board, the POST screen shows up …

Hi all, I have Lime2/legacy kernel 3.4, within 2-3 min after boot the network connection are dropped and up again. The problem for my automation, I can fix it? Regards,

Hi all, I download and upgrade the new armbian, and i dont know why, but my web service on Nginx, dosnt work the json... This problem can be for the kernel upgrade? or only is the Muyphy's law? Thanks

I have a boot problem with Orange pi pc plus. I flashed armbian desktop version to emmc, but, then I need a server version burn on my sd card,only green led lights and nothing happens. what kind of problem it is? upd: Only image that working is lakka and loboris lubuntu.So I flashed loboris image to emmc,but it doesn`t help

Hi. After 2 years uptime it disconnected from wifi and was unable to reconnect even after reboot. I suspect my AC adapter has degraded. Can this SBC measure the voltage? Upd: saw this post: https://raspberrypi.stackexchange.com/questions/112122/wifi-not-connecting-depending-on-power-supply I use NetworkManager and when it starts it usually cannot connect to wifi saying that the pre-shared key is wrong, marking the connection as failed and not re-trying. In particular, the log contained a failed "asking for new key" message. Re-starting the service or manually activating the connection worked. As a workaround I created a *.conf file in …

I'm on Armbian 22.11.1 Jammy / 22.04.1 LTS, kernel 5.15.80-sunxi. Orange Pi Zero LTS. I have the issue that using all available audio players, the first half a second or so of mp3s are cut off randomly. Meaning that sometimes the beginning plays correctly, sometimes part of the beginning is cut off. Repeadetly running the player sometimes works sometimes cuts off the audio. I have tried play, ffplay, both have this issue. The speaker is a small amlfier module, the LINEOUTL output is connected to it, but the right is the same. Any ideas where to look? This is driving me insane. Thanks! I have attached a test mp3, w…

Hi everybody, I have an OPZ board (256 mb). I couldn't manage to start work wifi in automatic mode. I tried manual configuration then tried nmtui in both cases wifi starts only after Ethernet plug was connected. OS: ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i How can I solve this problem? Thanks!

armbianmonitor -u hastebin - yadagozohu (armbian.com) Using https://redirect.armbian.com/region/NA/orangepipc/Jammy_current image Attached is the output from the serial console for uboot etc. The console is using about half the vertical resolution, and a little under half the horizontal resolution of the HDMI monitor. In contrast, the orangepi.org built image is using the full resolution. Image: Orange Pi PC 2.0.8 based on Debian Buster Kernel: root@orangepipc:~# uname -a Linux orangepipc 5.4.65-sunxi #2.0.8 SMP Mon Oct 26 10:20:38 CST 2020 armv7l GNU/Linux In Armbian, I've tried using …

Hello, I am not able to get the keyboard working. I have tried the downloads and compiling my own images. Bulleye is the only thing I can get to compile. There are error massages if I try to compile anything other than Bulleye.

Hi I am very new to computers. I have a raspberry pi 3 and just bought a orange pi one. My problem is I am unable to download an operating system to my working raspberry to burn to an sd card to be able to use the orange because the raspberry doesn't have enough space on my memory card. Do any of you know a company or person that could sell me an o/s that is already on a card for the orange, I have been hunting for ages for a site that sells something like noops for the raspberry. I have read that armbian edge might be the right choice if i can get it. Any help appreciated.

I'm using a NanoPI NEO (v1.31 Lite, 512M RAM) which has an Allwinner H3 cpu; running Armbian Stretch from here: https://www.armbian.com/nanopi-neo/ When changing the init system from the default systemd to sysV init as described at http://without-systemd.org/wiki/index.php/How_to_remove_systemd_from_a_Debian_Stretch_installation on the next boot, the boot process freezes. Installing the package sysvinit-core conflicts with systemd-sysv, depending on which resolution I choose (install systemd-shim and some libraries, or remove systemd-sysv and NetworkManager), the boot process freezes at one of the following 3 lines: [....] Starti…

Hi, is WoL supported on orange pi? I have orange pi pc+ and ethtool shows letter d next to Supports Wake-on , cant turn it on. Maybe I need to compile module with support?

I soldered the two wires to my OPi Lite, running Armbian 5.75 stable. I was only able to listen noise. Already tested to configurate /etc/asound.conf and alsa volume. Can you help me? Thanks.

I flashed a fresh card with the LIME2 image. On boot, the bootloader loads. Once the kernel starts to load, I lose the display on HDMI. It is being powered over mini-usb, from a powered hub. No additional peripherals. It looks like the system is running (based on the Ethernet), but HDMI isn't displaying (the monitor says no signal). I'm able to connect over ssh.

Hi, I'm trying to set a different GPIO state at boot (output 0) on a Orange pi Zero and I couldn't find any solution to this. Can someone tell me if this is possible and if yes how to do it ? Thanks !

Hi, I am trying to write a program which will detect the presence of SD Card in Nano Pi M1 plus device. There are many ways to do this either by doing fdisk -l or looking into /dev/mmcblk* . But I want to keep running it in a loop and doing fdisk -l and grep doesn't seems an appropriate way. Can the insertion or removal of SD cards be checked via Hardware Interrupts? Plz. help me I am a newbie.

i use armbian on my cubieboard2(based on Allwinner A20 Chip) with default HDMI. i have some problems. the first is default font of Terminal emulator and XTERM is so small. how can i changed their font size ?????!!! the second is i cant edit/create network connection with network manager. the ipv4 nad . .. are disable. is there anyone to help me plz.????

Armbianmonitor: http://ix.io/2g5I I recently started playing around with OrangePi Zero with the Allwinner H2+ CPU. I want to test out the internal audio DAC. To do so I enabled "analog-coded" in armbian-config. After rebooting I saw a new audio device in the output of "pacmd list-cards", but it says that only mono is available. How can I configure stereo sound? I haven't played around with "/etc/asound.conf" much as I don't understand it. Also, I don't have anything plugged into the audio pins on the GPIO.

What is the latest version of Armbian tested and proven working with a gc2035 camera module, please? I tried a few months ago and ran into so many issues, I gave up. Camera works in Android, didn't work in the Armbian I tried, and was eventually advised to try an earlier version that I couldn't easily find. I decided to defer the problem, but it is now more pressing. Thanks in advance for info and advice. Regards, Charlie

Good day, Is there a manual how to do that with the latest Armbian versions? Since my SBC have internal NAND and SSD installed, but still need a SD card to boot fom it?

hi how can i enable the tv out in orange pi PC+, I need to do a kiosk mode thanks

I have a orange pi3 lts. I tried to install either minimal ether gnome version. Wireless is configured and working . I tried to execute command sudo systemctl enable ssh and reboot but sshd is down always and screen show always desktop orange PI without any network connection. I tried to use also u armbian-config but ssh is always down and network is down . Any attempts is not working . In addition thr desktop interface is the same in minimal and gnome version .... very strange

Hi all, I'm trying to get some sensors working with latest Armbian on a NanoPi Neo ... 1st thing is that there are a bunch of modules loaded where I have no hardware for, f.e. pcf8591 and bmp085: root@nanopineo:~# uname -a Linux nanopineo 3.4.113-sun8i #28 SMP PREEMPT Thu Feb 2 02:01:28 CET 2017 armv7l GNU/Linux root@nanopineo:~# lsmod Module Size Used by ir_lirc_codec 3650 0 lirc_dev 7834 1 ir_lirc_codec ir_mce_kbd_decoder 2885 0 ir_sanyo_decoder 1480 0 ir_sony_decoder 1422 0 ir_jvc_decoder 1452 0 ir_rc6_decoder 1941 0 ir_rc5_decoder 1412 0 ir_nec_decoder 1556 …

I find orangepipc packages in http://apt.armbian.com/dists/stretch/main/binary-armhf/Packages they are: linux-stretch-root-dev-orangepipc v5.37 linux-stretch-root-next-orangepipc v5.37 linux-headers-sun8i for kernel-3.4.113 v5.35 linux-image-sun8i for kernel-3.4.113 v5.35 linux-u-boot-orangepipc-default v5.35 same as they in Jessie.. what's the status about debian stretch on orangepipc? gfx, network, video?

Hi! I ended up here: My Banana M1 was working well, connecting to a monitor I was able to see it working. But after I removed the sd card (after turning the M1 off) and inserted into a Windows machine (it couldn't read the linux fs, did not format it) it won't start anymore. Tried with all the recommanded SD card software to test with the slowest method possible to detect errors on it, but no error on the sd card. Tried many times to write with the recommanded balena etcher the currently supported images on the sd card, like: Armbian_22.11.1_Bananapi_bullseye_current_5.15.80.img.xz Armbian_22.11.1_Bananapi_bullseye_current_5.15.80_minimal.img.xz Did check their…

I believe that ethernet adaptor is not working properly because there's only one led blinking and its unable to receive ip address. I have tried to configure it with yaml files and manually with networkd and with static ip. I also tried to run dhcp on that interface and it received random ip outside of my network. Had no luck with network-manager either, it threw an error "ip configuration could not be reserved" With desktop image ethernet worked with no problem. So maybe there's a driver issue?

Hello there I am looking to prepare kernel headers on orange pi plus to install mali drivers kernel version 4.14.68-sunxi Release Bionic Command : cd /usr/src/linux-headers-4.14.68-sunxi && sudo make scripts -j4 Result: scripts/Makefile.build:155: recipe for target 'scripts/mod/devicetable-offsets.s' failed make[2]: *** [scripts/mod/devicetable-offsets.s] Error 1 scripts/Makefile.build:587: recipe for target 'scripts/mod' failed make[1]: *** [scripts/mod] Error 2 Makefile:569: recipe for target 'scripts' failed make: *** [scripts] Error 2 I have tried everything here is the det…

Hello I have installed the iso in debian 8 (jessie). I would like to update to debian 9 but on armbian-config, i don't find the menu NEXT on submenu system Where i can find the latest kernel for update manually? my card is an orange pi zero Thanks for all and sorry for my bad english (french) David

Greetings! I have acquired for cheap this old board. It runs an old Android (4.x) and I'd like to run Armbian on it, but lack the knowledge to do that by myself. The idea would be to start with booting a Linux a SD image, then attempt to install it on the onboard flash in place of Android. The board is not for sale anymore and the manufacturer removed any mention of it from their site, however Archive.org has a copy along with related files, manuals, firmware etc: https://web.archive.org/web/20140701064007/http://www.giadatech.com/index.php?act=pShow&id=36 The board presents itself when not in USB host mode as "SoftwinerEvb" which appears to be …

I'm testing different firmware versions for OrangePi 3 LTS a bit and I have to mention that version: Armbian_community_24.11.0-trunk.202_Orangepi3-lts_noble_current_6.6.44_gnome-kisak_desktop.img It has a flaw that can cause some trouble for beginners, i.e. after installing, the system automatically goes to the suspend option after 15 minutes 🙂 Disabling the suspend option completely helps, but it then prevents you from using the suspend option by clicking the button on the board 🙂 This is probably an error related to both battery and mains power supply. https://discussion.fedoraproject.org/t/gnome-suspends-after-15-minutes-of-user-inactivity-even-on-…

raw_gadget compile failed make make -C /lib/modules/5.15.93-sunxi/build M=/root/raw-gadget-master/raw_gadget SUBDIRS=/root/raw-gadget-master/raw_gadget modules make[1]: Entering directory '/usr/src/linux-headers-5.15.93-sunxi' MODPOST /root/raw-gadget-master/raw_gadget/Module.symvers make[3]: *** No rule to make target '/root/raw-gadget-master/raw_gadget/raw_gadget.mod.o', needed by '/root/raw-gadget-master/raw_gadget/raw_gadget.ko'. Stop. make[2]: *** [scripts/Makefile.modpost:139: __modpost] Error 2 make[1]: *** [Makefile:1820: modules] Error 2 make[1]: Leaving directory '/usr/src/linux-headers-5.15.93-sunxi' I cat Module.sysmvers in /usr/src/linu…

Greetings All, I'm trying to get my old Lexmark X1190 printer to work on my OrangePI PC without succes. I'm using the Xenial OS from armbian. Is there anyway I can get this printer to work on my OPI PC ? Thanks in advance Darren

So I am using Armbian on Linux with Orange Pi 5 and as I connect my Ethernet cable it is not able to connect as if i got to Firefox a tab will not be able to load. Any suggestions.

I got an Orange Pi PC with Armbian Ubuntu Desktop installed. It runs perfectly fine. 1080p resolution, sound, ethernet, browsing, what-have you. It can even play x265 videos flawlessly (which is why I got it for as my RPi3 can't). Highest temp is 46C so far (with or without a heat sink and no fan). Anyway, I've updated and upgraded and then installed Kodi. My media is on my NAS, so I input my SMB info, and it connects fine. But as it reads the media, Kodi just shuts off on its own. No crash report or anything. It just closes and I'm back on the desktop. Re-opening it starts Kodi up for a sec and then closes itself. Deleting the user folder under a Kodi directo…

I can get WiFi working on the M2+ but not with encryption, I am using the latest Armbian has anyone had wifi success with this board ?

I'm currently running ARMBIAN 5.31 Debian GNU/Linux 8 (jessie) 4.11.5-sunxi on my Cubietruck, which otherwise works fine as a headless data and media server. However, for quite some time (also on previous ARMBIAN builds) I get two failure messages every time I boot the system: > [FAIL] Starting up cgroup management Error: /var/log is in use ... failed ! ramlog-tmpfs 2.0.0 In /var/log/boot it says: Sat Jun 17 19:53:57 2017: INIT: Entering runlevel: 2 Sat Jun 17 19:53:57 2017: [^[[36minfo^[[39;49m] Using makefile-style concurrent boot in runlevel 2. Sat Jun 17 19:53:59 2017: [....] Starting cgroup management daemon: cgmanager[....] Starting ram…

Hello, I'm a new Armbian user of my first OrangePI One H3 board after much time spent on rpi boards. I was curious to see how these boards run and I bought one. I'm using a fast 32GB A2 microsd, an external 4 USB externally powered hub, an HDMI to VGA converter with audio out. I was deciding at first which o.s. to use cause I've seen there're also Ubuntu and Debian official 5.x kernel based images on their page but I tried this at first. I've installed usual applications browsers office apps mail etc, and now I'd like to make some questions to better understand some things: 1) I know being on the armbian forum I'd expect everyone to prefer thi…

Hi to all. Is it possible to write tmp video files to zram. Im using Opi Pc as A video recorder. And would like to write files to zram. Zram mounted to /var/log/. Im writing to /var/log/motion. Is it A good way? Latest armbian. Thank you.

Hi. I want to run the desktop at a 800x600 resolution, to get better FPS at full screen gaming (HDMI screen). I fiddled with OpenGL, and it looks like I got a lot better FPS by just using glshim. Is there a known approach to getting 800x600 resolution? h3disp does not show 800x600 as an option. This is the Armbian Ubuntu Xenial image. Regards, Morten

Hi I want make VPU work on OPI 3 with mainline kernel I apply the LibreELEC Kernel patch and /dev/video0 is registry. I also apply LibreELEC FFMPEG Patch and build with v4l2-request But when I decode videos,VLC did't decode frames and kernel say's : cedrus 1c0e000.video-codec: Missing required codec control Why? What should I do?

I just wanted to report that Armbian Buster image for Orange Pi 2 there SSH does not work. I tried installing it twice and also tried taking all updates. I had no skill to analyze or fix the problem, so just wanted to report it as is in case if it is not known. SSH does work on the Bionic Image for Orange Pi 2.

Problem was, that via same file /etc/rc.local was started dnsmasq which crashed and rc-local.service didn't continue with starting wvdial , Hello All, Could someone please help me to start command wvdial during booting-process? When I star wvdial command from command line, LTE USB modem is started and ppp0 interface is activated and everything works fine, but I want it to be started automatically during booting-process. I tried add wvdial to end of file /etc/rc.local, but wasn't successful. I also tried to add record to file /etc/network/interfaces as: auto ppp0 iface ppp0 inet wvdial None of these mentioned above helped.…

i am normal write the sd card by rufus, can boot into system, when i use armbian-config install system in emmc boot in emmc after copy i try shut down and remove the sd-card, boot fail, power led no on, how to fix, thanks

How to disable HDMI and CODEC in system where is ne kernel 6.18.25 cat /proc/asound/cards 0 [Codec ]: sun4i-codec - H616 Audio Codec h616-audio-codec 1 [HDMI ]: HDMI - HDMI HDMI 2 [Device ]: USB-Audio - USB PnP Sound Device C-Media Electronics Inc. USB PnP Sound Device at usb-5200400.usb-1, full speed I need an always USB sound card with the number of 0

sunxi-tools's seem to be missing from the image or have I messed the paths somehow ? (Armbian_5.24_Orangepipcplus_Ubuntu_xenial_dev_4.9.4.img) got it from here https://github.com/linux-sunxi/sunxi-tools but if this is not a mistake I have to add it to my automated installation process

Armbian Bionic not sound output 3.5mm jack root@orangepipcplus:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0

I did a apt-get upgrade with the current Ubuntu/Debian images and the wifi sharts on the 512MB Duo. Didn't see anything in syslog to indicate an issue. A temp fix is to freeze the kernel updates in armbian-config.

Hi, Trying to setup audio mux on orange pi boards, for now trying to stick on orange pi ZERO & ONE ( both of them ). By mux, meaning will try to setup some peers which can play locally or stream sources they have. Let's say all peers have - x2 line in - x1 mic - x1 line out Want to dynamically connect any source to any output on any peer. For example after choosing, you can able to play line in of peer 1 on peer 1 output OR peer1 line in on peer 2 output And I think CD quality is more than enough. Trying to find any tools that will help to make this. Two solution points needed: - hardware: ?? as far as I can find, there is "line…

Hello: I have an issue with one of my opi pc boards: When I connect it to hdmi tv and tv is not connected (switched on before booting the soc), I get just a red screen. Armbian is up and ready. I can log through ssh. Tested in Armbian_5.38_orangepipc_Ubuntu_xenial_default_3.4.113_desktop and openelec (last version). Same problem in both. I'm looking for mods in the .fex file (if there are any that applies to this case). So far I checked http://sunxi.org/Fex_Guide without luck. Time ago, I had a similar problem with an raspberry pi. In this case it was solved with a parameter in the config.txt (hdmi_force_hotplug=1). With thi…

Hi all, as in title, gpio not work on latest Lime2 5.59 built from source using mainline 4.14.70 kernel and debian stretch. I can export correctly the gpios in sysfs but i cant get the right value. They always remain the same value. I've tried both pulled up and internal pulled up (active low) gpios with the same result. Also gpio buttons defined in dtc do not work. Any idea?

Hello, I use the BananaPi M1 as network bridge with tranparent http proxy and filter with 2nd ethernet (USB adapter with AX88179 Gigabit Ethernet). But since latest update with kernel update, the network seemce to be go down often or the sytem is going bad. I can't find any solution and need some help. If you need some more information, please tell me what I should send. Thank you! Edit: The system is stuck on reboot... have to put of the power.

Hi All! I have RT kernel on my OrangePi Zero now. Linux orangepizero 4.14.8-rt9-sunxi #1 SMP PREEMPT RT Sat Jan 6 14:36:31 CET 2018 armv7l armv7l armv7l GNU/Linux Guru, please, HELP me to reconfigure it to using MIDI + Pure Data!!! ALSA is fully installed. But there's a problem: root@orangepizero:~# aconnect -i ALSA lib seq_hw.c:466:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory can't open sequencer

Dear all, I discovered that the leds section is missing in the devicetree of orangepizeroplus2 H5 (at least upto kernel 4.14.39), and had to write an overlay to get them to work. The overlay has been attached. I've added this overlay file to /boot/overlay-user/ and added the overlay in /boot/armbianEnv.txt as follows: Kind regards, Dennis sun50i-h5-orangepi-zeroplus-leds.dts

It seems the links to download the new Focal build for the nanopi neo core 2 are dead. https://www.armbian.com/nanopi-neo-core-2-lts/ Neither direct nor torrent seem to be working.

Hi, I use armbian distribution on opi+2e , in order to operate the Jeedom home automation system. I occasionally encounter crashes of my opi, which becomes inaccessible in SSH. We are several users of this system to encounter the same problems. In logs, date is 1970, so we suspect a time synchronization problem. We use timedatectl for ntp synchronization, but it appears that rtc clock (fake clock) is not stable. Why? Any solution to keep rtc clock synchronous with ntp? Somes members of Jeedom community try with hardware RTC clock on I2C, and it seems working. But any existing other solutions? Thanks.

Fresh installation of Armbian On OrangePie+ 2e Not Shutting Down Network lights still on ..... BT still On but not SSH connectivity neither image on monitor any ideas ? Thanks

Hút bể phốt số 1 hn – địa chỉ nào tốt nhất Tại Hà Nội hiện nay, tình trạng tắc nghẽn, đầy bể phốt thường xuyên diễn ra gây ảnh hưởng nghiêm trọng đến cuộc sống sinh hoạt của người dân. Một trong những giải pháp tốt nhất trong những trường hợp này đó chính là sử dụng dịch vụ hút bể phốt của đơn vị hút bể phốt số 1 hn - Công ty hút bể phốt Avico với chất lượng dịch vụ hoàn hảo nhất. >>> Mời các bạn xem thêm về Dịch vụ hút bể phốt tại quận Hoàn Kiếm Avico : https://hutbephottaihanoi.vn/hut-be-phot-tai-hoan-kiem/ Những lý do khẳng định Avico là đơn vị hút bể phốt số 1 hn Trên thị trường hiện nay có vô vàn đơn vị cung cấp đến với người dùng trên thị trư…

Not sure if my keyboard is working in DESKTOP. Do I need to to install it? Though it is working in command prompt and retro. If not, how do I use it without a mouse? in Windows, you could tab/alt/spacebar/enter and etc but none of this works. Keyboard works in command prompt

Using the latest FW Image https://redirect.armbian.com/orangepizero2/Bullseye_legacy the Orange Pi doesn't boot anymore or at least I'm not able to establish a ssh connection. If I use the the archived previous version the board behaves completely normal until I perform an "apt upgrade". After upgrading it also doesn't boot anymore.

Hi all Does anyone recall if with kernel 4.9 it is required to put some patch for enabling power on the USB Host port of BananaPi? I am using vanilla kernel in another project, (LEDE) and when switching to kernel 4.9 I don't have any power from the USB port The dts is the vanilla one and AXP20x power driver is enabled Thanks!