Allwinner sunxi

Orange Pi One is not booting with Debian Jessie Server image http://www.armbian.com/orange-pi-one/ http://mirror.igorpecovnik.com/Armbian_5.14_Orangepione_Debian_jessie_3.4.112.7z But there is no problem booting with the Debian Jessie image made by Boris Lovosevic https://drive.google.com/open?id=0B1hyW7T0dqn6c3BNOWRwRnZZUTQ One month ago I got to boot another Orange Pi One with the image available at armbian.com/orange-pi-one/ but not any more This is the way I dd to SD card sudo dd if=Armbian_5.14_Orangepione_Debian_jessie_3.4.112.raw of=/dev/rdisk2 bs=1m I would really appreciate your help I am the maker of this demo and Instructable Swift …

Hi everyone, I am having issues with video output on my A20-micro when using legacy kernel. I get the proper output from uboot, but when it starts to load the kernel, I get some garbage on the screen, then nothing. I had a look through the forums to no avail. My boot logs are uploaded to http://sprunge.us/dGhS From what I see, the default kernel command line seems to be correct for my purpose. The system is up and running as I can login through serial and SSH. I tried setting the resolution with a10disp but I got the following response: "Cannot change HDMI mode because HDMI is not enabled." Anyone has a clue on what I am missing ? Than…

I can't set Orange Pi Plus 2 clock speed to 1.54Ghz. Please fix it

After update from armbian5.23 to armbian5.25 driver for gc2035 not work. The device isn't defined. =========== Armbian 5.25 ============== root@orangepipc:~# ls /dev/video* /dev/video0 /dev/video1 Where: /dev/video0 and /dev/video1 - v4l2loopback root@orangepipc:~# cat /etc/modules #8189es #rfcomm #w1-sunxi #w1-gpio #w1-therm gc2035 vfe_v4l2 #sunxi-cir v4l2loopback root@orangepipc:~# modinfo vfe_v4l2 filename: /lib/modules/3.4.113-sun8i/kernel/drivers/media/video/sunxi-vfe/vfe_v4l2.ko description: Video front end driver for sunxi license: Dual BSD/GPL author: raymonxiu depends: videobuf-core,vfe_os,vfe_subdev,videobuf-dma-contig,cci …

Hi, Installation of Armbian on orange pi +2e,stops with next massage: orangepiplus2login:[19.149567]ADDRCONF(NETDEV_UP):wlan0:link is not ready I can't unfortunately find what i am doing wrong and how to fix it. Can you helpme please? Thanks

Hello ppl. I have an Orange Pi Zero, and I have some issues using UART interface, it give me an output like this: ▒▒▒I▒%E▒Y=7▒g!=7▒Y=5▒[s▒i-''▒Y-9/▒Y=▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒Y=7▒c5!e=#=15Q=-▒a#'-#5▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒[5=9/57▒=5▒c5!-▒a'▒7==;=5▒57=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒}=9/5▒▒5;▒5▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒}7=#957▒muuu▒▒▒▒▒▒▒▒%=#=15%5#▒7=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒7-)▒5%5▒%!#-!▒7=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒Y=cW_▒7=5%!#▒▒▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒Y=7▒▒59▒▒'!9='▒y▒▒▒R▒%I▒▒▒▒%▒▒ai▒▒▒I▒%E▒Y=7▒gY{…

I'm using wiringPi installed from here, it works fine for the most part but when I try loading spi it throws the following error: modprobe: FATAL: Module spi-sun7i not found in directory /lib/modules/3.4.113-sun8i gpio: Unable to load spi-sun7i FYI: I'm using Armbian 5.31

I have an Orange pi +2e running the desktop version of armbian. I want to install armbian to the built in emmc . Armbian is currently running on a SD card when I used the command "nand-sata-install" I got these options. which of those do i select to install Armbian from the SD card to the Built in emmc

Hi everybody, just downloaded Armbian_5.30_Orangepizero_Ubuntu_xenial_default_3.4.113 and flashed. I can see "orangepizero" in network, also ip is pingable but ssh port is closed. Is it a known issue? Armbian_5.30_Orangepizero_Debian_jessie_default_3.4.113 from archive works fine. Thanks

Hello, My BananaPi board doesn't boot after apt update & apt upgrade. I didn't have any problems until now. At first I suspected it could be the SD card as it seemed to me the "server" was slower on authentication but the SD card looks ok. There were some errors when reading it via gdisk but f3 didn't find any problems. So I copied the newest downloadable image onto it. It worked again until the upgrade. What can I do to restore the functionality? Is there any known problem with last upgrade?I update the system quite usually so the change that could be responsible for this shouldn't be more than a month old. I even tried to use the direct attach…

EDIT: This seems to be a problem with the OS running on the Mikrotik router. See this thread for a work-around that "shouldn't make a difference". Hi! I've got some trouble with u-boot on an Orange Pi PC+ connecting to a Mikrotik router RB922UAGS-5HPacD, and I'm not sure where I should start digging. Here is what I have so far: Orange Pi PC+ with u-boot 2017.11-armbian installed on eMMC by running nand-sata-install. But instead of booting from eMMC, I'd like to fetch the kernel via tftp, so I modified the bootcmd accordingly. The relevant configuration / commands are: setenv ipaddr 192.168.3.74 setenv serverip 192.168.3.7…

I'm running some stress test on the NanoPi neo2 512mb, CPU heating reached 75-76 degrees, and it's stable, the problem that I faced is that the computer changed it's IP suddenly (after 55 minutes of test running), I guess it's because of a network card reset. Did anyone face the following issue? Is it related to the stress test? Or it's another networking problem? The test I'm running is with the "stress" tool, running long time stress on 4 CPUs. In addition, does anyone have any insights regarding this device? good or bad?

After the automatic update to kernel 4.19.17 the CPU temperature is wrong and much higher, also in dmesg there are these errors Spoiler dmesg | grep thermal [ 6.428747] thermal thermal_zone1: binding zone cpu-thermal with cdev thermal-cpufreq-0 failed:-22 [ 6.841480] thermal thermal_zone0: failed to read out thermal zone (-110) [ 6.841546] OF: /thermal-zones/cpu-thermal: arguments longer than property [ 6.841560] thermal thermal_zone2: failed to read out thermal zone (-110) [ 7.877181] thermal thermal_zone0: failed to read out thermal zone (-110) [ 8.050346] thermal thermal_zone2: failed to read out thermal zone…

I have two NanoPi R1s, both with Armbian Buster. I want to use both as wireless access points, however the wifi seems to be problematic. It always works at first, but not anymore after updating, changing the config and rebooting. My hostapd config is the following: # # armbian hostapd configuration example # # nl80211 mode # ssid=[myssid, contains some numbers] interface=wlan0 hw_mode=g channel=6 [11 on the other one] #bridge=br0 driver=nl80211 logger_syslog=0 logger_syslog_level=0 wmm_enabled=1 wpa=2 preamble=1 wpa_psk=[random thing armbian-config generated] wpa_passphrase=[secret] wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP rsn_pairwise=CCMP wpa_strict_rekey=1 wpa_dis…

Hi, I would like to configure my nanopi Air as an AP and facing some issues. I have edit my /etc/network/interfaces as follow to use hostapd # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static hostapd /etc/hostapd.conf address 192.168.1.1 netmask 255.255.255.0 and I have linked the the hostapd.config config file in the /init.d/hostapd. my hostapd.config is as below ssid=AERS interface=wlan0 hw_mode=g channel=5 driver=nl80211 logger_syslog=0 logger_syslog_level=0 wmm_enabled=1 wpa=2 preamble=1 wpa_passphrase=aerstest wpa_key_mgmt=WPA-PSK wpa_pair…

Hi! I ended up here: My Banana M1 was working well, connecting to a monitor I was able to see it working. But after I removed the sd card (after turning the M1 off) and inserted into a Windows machine (it couldn't read the linux fs, did not format it) it won't start anymore. Tried with all the recommanded SD card software to test with the slowest method possible to detect errors on it, but no error on the sd card. Tried many times to write with the recommanded balena etcher the currently supported images on the sd card, like: Armbian_22.11.1_Bananapi_bullseye_current_5.15.80.img.xz Armbian_22.11.1_Bananapi_bullseye_current_5.15.80_minimal.img.xz Did check their…

I configured my opi to work as a composite usb gadget (mouse and rndis). Everything works, but the actual refresh rate of the mouse was 250 Hz. I tried to configure bInterval, which is responsible for the device update frequency, this could only be done by rebuilding the kernel with bInterval changes in the high-speed descriptor structures from 4 to 1 in the file drivers/usb/gadget/function/f_hid.c. It had an effect. But the frequency only rose to 500 Hz. I tried to find what could limit this, I looked in drivers/usb/dwc2/gadget.c and also in composite.c but I couldn’t find anything. Now I don’t know where to look next or i missed sth.. drivers/usb/gadget/func…

Dear Igor, I compiled a kernel (Wheezy mainline) with your script, everything is perfect! There is only one thing, what I don't know how to do: I need to patch rtl28xxu.c before compiling or /even better/ if it possible to compile this module only and overwrite the .ko file at "/lib/modules/4.0.4-bananapi/kernel/.....folder". Could you help me please how can I do that? At line 1612 I need to change: - rc->interval = 400; to this: + rc->interval = 200; Thank you very much! Gyuri

Cubieboard2 Mali400 driver is able to compile, but no fps advance\ I'm using Armbian 4.2 the compile process is based on http://blog.eldajani.net/banana-pi-arch-linux-accelerated-mali-gpu/

Hello, how to enable analog tvout? I have OpiPC board with legacy jessie desktop armbian image. I added module tv in /etc/modules. I change script.bin with: [disp_init] disp_init_enable = 1 disp_mode = 1 screen0_output_type = 3 screen0_output_mode = 10 screen1_output_type = 2 screen1_output_mode = 11 fb0_format = 0 fb0_width = 0 fb0_height = 0 fb1_format = 0 fb1_width = 0 fb1_height = 0 [tv_para] tv_used = 1 tv_dac_used = 1 tv_dac_src0 = 0 But there is no signal at all... I checked tvout with loboris ubuntu image (added "tv" to /etc/modules and fixed script.bin) and my tvout worked well. I noticed that when ubuntu image is loading tvout already gives to…

i run a cubietruck on armbian with 4.6.2 kernel. it starts with the software on mmcblk0p1 (with kernel 4.6.2 and the /lib dir on the sd) but uses as root a partition of the ssd. when i upgrade now, i see that the upgrade process produces a new initrd.img-4.6.3 and removes the old 4.6.2. (diagnosis: the system runs, but the keyboard/mouse connected to the usb is not functional - desktop over net works!) i assume that there is something wrong with the boot.cmd - but i do not see exactly how to fix it. the upgrade process uses the ssd .../lib directory and removes 4.6.2 there. if i would mount the /boot directory with the running system (in fstab) - would this hel…

Hi, is my Cubieboard is damaged? Couple days ago my server was suddenly turned off. When I checked, it turned out, that the Allwinner is very hot. So I added a radiator and run the Cubie with serial console. Seems like everything is ok, but temperature... almost 50*C. log_15082016_2.txt

I've upgraded to 5.20 from 5.17 and I've had to modify my /boot/bin/micro.bin to activate the VGA output. After Upgraded the board didn't reactivate the VGA, and I've to do it manually. Maybe some warning in the changelog will be an help to those have to do such modifications. The upgrade process copied the bin dir to bin.old. I have to apply "sudo apt-get upgrade" twice as the first run complain about come conflicting files and abort the upgrade, the second run did the job. I'm running legacy debian Jessie image and upgraded from 5.17 to 5.20. Now it seem to work well.

hi my kernel 3.4.113 from armbian my OrangePi Zero dont have poweron - button by default / i know system can wake up from gpios / IR signal / usb events / wakeonlan and another sourcec bu i try todo standby and wakeup after! withous any success (((( :/sys/power# cat state standby mem bootfast goto sleep echo mem > /sys/power/state or echo standby > /sys/power/state working fine ) but i cant wakeup system (((( i try gpio usb ir wakeonan what i do wrong ???? somebody can clarify my issue ??? my loaded modules lsmod g_ether 38598 0 ir_lirc_codec 3685 0 ir_nec_decoder 1556 0 lirc_dev 78…

Hello together, I'm trying to connect an LVDS panel to my BananPro and would like to switching power on/of and backlight on/off throw a GPIO pin. So, first of all, I've added some lines to my DTS file (in &pio section). This is for backlight driver (PH12 is connected to CON2 pin 7): bl_en_pins_a: bl_en@0 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; }; And this is for enable pin of voltage regulator (PH7 is connected to CON2 pin 6): lcd_power_pins_a: lcd_power@0 { allwinner,pins…

I just wanted to share some instructions on how to control all GPIO pins on the OrangePi Zero Plus 2 board. These instructions are meant for newbies but it can be extremely helpful if you are new to Armbian, OPI and GPIO. At least it would have been for me. There is a total of 17 different pins to control according to the schematic below. These pins are highlighted in blue numbers that indicate what GPIO port they are available at. Use these numbers in order to know that pins to control. Look for instructions further down. First off some basics: Activate a pin by exporting it. For example. In order to activate IO-0 run: echo "…

Hello, my Orange Pi Zero CPU is constantlyrunning at 67-68-70°C (it is the same with/without passive cooler). Is this temperature ok for my board? Can I run it with this temperature long time (weeks, months, years)? Thanks for help.

Hello to all! I'm using Armbian on my BananaPi board. I've the following version: ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.15-sunxi BOARD=bananapi BOARD_NAME="Banana Pi" VERSION=5.35 LINUXFAMILY=sunxi BRANCH=next ARCH=arm IMAGE_TYPE=user-built BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage I need to follow these instructions to wire a radio on the board: https://www.mysensors.org/build/orange But I cannot find the script.bin file. Why? I can remember the file was here on old releases. Any help or suggestion? Thanks, Simon

Hello, I'm having problems with USB sound card - speaker - card reader combo, named CD002 (hardware ID e2b0:0811). I managed to make it work with clean Armbian 5.38 image (kernel 4.14.14) by installing pulseaudio, but it sounds like crap using both mplayer and aplay; mplayer reports "audio device stuck" sometimes. The card is definitely OK, on RPi3 running DietPI it worked immediately and sounds fine. How do I set it up correctly so that it sound fine on OrangePi Zero & Armbian?

Hi, Today I encountered for the second time a strange behavior on my Orange Pi PC running Armbian 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi and decided to ask here. The OPI PC is working properly for a few weeks (one to three, typically) and suddenly I cannot access it via SSH or UART anymore. When trying to connect with SSH, the connection hangs after entering the password and after a while the connection timeouts. Tried SSHing from regular Linux shell and from PuTTY under Windows. I regularly use a key to log in the Opi PC, but it doesn't work, too. Trying to connect with the UART (via minicom in Linux or PuTTY in Windows) …

Hello guys, I am trying to use hardware flow control over the uart 1 of a nanopi neo core that I am using with a minishield. The GPIO pins of RX,TX,RTS and CTS of uart 1 based on this documentation (http://wiki.friendlyarm.com/wiki/index.php/Mini_Shield_for_NanoPi_NEO_Core/Core2) are G6,G7,G8 and G9. First of all I downloaded WiringNP in order to see the status of each GPIO. Before activating the rts cts on uart1, the figure "beforeActivatingRTSCTS" is the output of the command "gpio readall" . Then I added to the /boot/armbianEnv.txt the following overlay : param_uart1_rtscts=1 I rebooted the nanopi. After reboot, the figure "Aft…

For days now I have been fighting to get this thing working. No boot, No hdmi, no sound, no wireless network and so on. Armbian is anyway the best choice for this device, Supported? well yes if you have lan, true HDMI Well i got it to boot, after writing a new image to sd card. finally booted, no signal detected ( with a DVI > HDMI ), I had to hook it up to a true HDMI and modify the script.bin file to get a signal. Got it to boot all the way to the desktop. Hurray ! Plugged in a crappy wifi adapter from Ali express (realtek 8081 i think it is) and I got wifi, jippi. Next time booting no wifi, no matter what I tried. Made a new image again, with modi…

I'm not sure I even want BakeBit. I'm trying to use the GPIO in my NanoPi Neo2. Specifically I want to read a digital I/O pin on/off state. And if possible I'd like to read an analog voltage from the H5's built in ADC. Now that I've looked deeper into BakeBit, it seems like the entire purpose of BakeBit is to do GPIO with an Arduino, and read the information remotely on a RbPi/NanoPi or whatever ON the Arduino's GPIO pins. If that is really what BakeBit is, then BakeBit doesn't interest me. The H5 already has GPIO and an ADC. We just need to get that working. For interest's sake, here is the progress I made with BakeBit. ADC Python example in Bakebit h…

I am using Olimex Lime 2 Emmc Rev.k for a project. One of the Boards shuts down randomly. Its not a freeze or a sudden power down of the board. The board undergoes a complete shut down procedure. I checked the log entries in /var/log/syslog log file. There is a entry of board going to shut down but I couldn't find the reason for shut down. Is there a way to find out if the board got shut down because of the Power-button press, shutdown command from a SSH client, shutdown because of temperature or shutdown because of under voltage ? Is there a log file i can check to find the reason for shutdown?

Hello, I am using a orangepi one plus, but that might be no connection with my issue. I am having the following network configuration: # Network is managed by Network manager auto lo iface lo inet loopback allow-hotplug eth0 eth0.1 eth0.10 auto eth0 iface eth0 inet manual pre-up ifconfig $IFACE up post-down ifconfig $IFACE down auto eth0.1 iface eth0.1 inet static address 192.168.1.250 netmask 255.255.255.0 gateway 192.168.1.1 auto eth0.10 iface eth0.10 inet static address 192.168.10.1 netmask 255.255.255.0 if i disconnect the network cable and connect back the interface is not come up automatically from the state it…

I am operating a headless data acquisition system with Orange Pi Zero Plus2. In the readings I collect among others data from a discrete separate 18B20 sensor and record the H3 CPU temperature. The 18B20 reading comes from the w1 kernel routine, the CPU temp is provided by armbian OS. With the new OS 5.8.16 I see a strange effect: reading .... the external sensor at /sys/bus/w1/devices/<sensID>/temperature and the CPU temperature at /etc/armbianmonitor/datasources/@soctemp it gives the same reading correct to a 1/100 degree. Even when the system runs low power - this cannot be true. I have no idea how these results can be mixed in t…

Hi, I'm trying to set a different GPIO state at boot (output 0) on a Orange pi Zero and I couldn't find any solution to this. Can someone tell me if this is possible and if yes how to do it ? Thanks !

Bookworm 6.1 kernel Cinnamon terminal is unusable. The terminal screen flickers and the written text blinks with the cursor blink. Occasionally the terminal goes black. I am using an ancient 1024x768 screen. Is this the root cause, or is the terminal broken in Cinnamon?

I have a NanoPi Neo. I am trying to get a gps module setup on it. Just at typical neo6m, serial gps module. I would like to start out at the basics. I am not new to linux, or micro controllers, but I am new to the nanopi. How can I confirm that something is talking on the serial ports? Is there a way to route the serial port traffic to the terminal when I am logged in through ssh? I am not sure the uart1 is enabled, but even if it is enabled, I really wouldnt know how to confirm it. Does anyone know where I can look to find some info? I would like to find out how to enable the serial ports for communication with another device &amp…

Hi, we bought several Lime2 and tested them. Unfortunatelly, the GBit-Lan did not seem to work reliyable. Later ping tests revealed a packet loss on many boards of 1% to 20%. (eg. "ping -s 9000 -i 0.0001 -c 5000 fritz.box"). Some boards dont have any problems, other more. On heavy access with SSD it's increasing a little. It's happens also without SSD. Other boards worked fine at the same power and network cable. Its possible thant this strange TX_DELAY isn't set correctly? Are there other problems known? I used the wheezy image with kernel 3.4.105-lime2 and 3.4.107 from you latest wheezy image. The image with Kernal 4.0.4 stopped after "restarting sshd",…

i have banana pi m2plus and compile latest armbian after starting x11, i get "could not connect to wicd's d-bus interface..." no error shown in /var/log/wicd/wicd.log and wicd seems to be working also bcmdhd loaded, but when trying to connect wifi, cannot get ip any idea?

updated to 5.15 (then 5.16) release using aptitude. Kernel update worked. But when I updated u-boot ( linux-u-boot-orangepiplus2e-default ) , the system will no longer boot (see attached). But if I use linux-u-boot-orangepiplus-default , it will boot. (Note that the install script, to write/dd SPL , is hardcoded to mmcblk0, which is usually correct, but for this fix, I start boot on SDHC then pivot-root to eMMC. My running root is mmcblk1 during this "rescue" boot). Both 5.15 & 5.16 exhibit this behavior. Thanks, wha bad-uboot.txt

I ordered OPI PC+ as a testing device for a potential battery/solar powered project (using OPI Lite/One later on) and while testing the built-in WiFi on OPI PC+, it seems it's not possible to power it off once enabled, or perhaps I'm doing something wrong. If the wlan0 entry in /etc/network/interfaces is commented out, the idle current is roughly 210 mA, and after issuing sudo poweroff, it drops to near zero. With wlan0 enabled, the idle current is roughly 310 mA, but after powering off, it drops to about 100 mA and stays that way until disconnected from DC. Attempting to do sudo ifconfig wlan0 down does not seem to change anything (wireless goes down, but the idle cu…

First of all, thank you very much for the great work! On cubietruck after upgrade to 5.20, I have some trouble with network bonding. /etc/network/interfaces: auto eth0 iface eth0 inet manual bond-master bond0 bond-primary eth0 bond-mode active-backup auto wlan0 iface wlan0 inet manual wpa-ssid xxxx.xxx wpa-psk xxxxxxxxx bond-master bond0 bond-primary eth0 bond-mode active-backup # Define master auto bond0 iface bond0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx hwaddress ether xx:xx:xx:xx:xx bond-slaves none bond-primary eth0 bond-mode active-backup bond-…

Hello, now my system is running well on my Cubietruck: (ARMBIAN Ubuntu 16.04.1 LTS 4.8.1-sunxi) Booting from SDCard rootfs on SSD (installed via nand-sata-install script) Whereas a image backup of SDCard is easy, how to backup my rootfs on SSD for system fallback Szenario: Is there any good script to backup rootfs of SSD with shrinking function to get small backup files? simply TAR of "/" of SSD? Use of webmin backup functionality (howto store this backup on network drive outside my Cubietruck)? Best Regards, Martin

Hello, my goal is to use two RC522 RFID readers on orange pi. In order to do that I will need help. Let me first explained how I made one work (googled it read, test and it work) GUIDE HOW TO USE SINGLE RC522 on Orange PI PC hardware connection: MOSI ——————————> pin 19 MISO ——————————-> pin 21 SCLK ——————————-> pin 23 SDA ——————————–> pin 24 RST ———————————> pin 22 IRQ ———————————-> NONE that is all about hardware connection, let look at software part, on Armbian some …

Hi! I think all fine in my configuration, but not connect on boot, I need to killall -q wpa_supplicant and run /etc/init.d/networking restart to connect. # /etc/network/interfaces iface wlan0 inet static address 192.168.1.200 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 pre-up wpa_supplicant -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf -wB -D <forgot the name> post-down killall -q wpa_supplicant

Hello, I'm using Armbian Xenial with ethernet on my local network. SSH and PostgreSQL seem to disconnect a lot. This is really frustrating with sshfs when I try to work with files on the Orange Pi Zero as a file server.. I tried setting a keepalive every second and that doesn't help either. I don't see anything in the logs that hints to anything. I have not attempted to use wifi. I did just notice the timezone was wrong, so I'll see tomorrow if that has something to do with it.

In my Orange Pi One with ARMBIAN 5.27.170422 nightly Ubuntu 16.04.2 LTS 4.10.11-sun8i I install acpi: sudo apt-get install acpi And run sudo acpi_listen And nothing is show when I press the power button. Is normal or my button is damaged? Thanks

Hi, This is my first post and I want to say thank you to all the developers and contributors of this great eco system. I've build an image for odroid xu4 with the openmediavault script. This is really great because the software packages and kernel ist up to date and running like a charm. Then I tried to get my DVB card working but that is work in progress. The card is not supported by the 4.9 Kernel and the usual way is to compile the media_build package from hier: https://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers But with an cross compiled system as armbian i…

I installed the kernels from and flashed them to sd card. Then i copied the modified .ko files from image that i built for latest non-rt kernel using the compile.sh. My orange pi zero is running rt version. When i try to modprobe the modified and copied module it gives me error: modprobe: ERROR: could not insert 'libcomposite': Exec format error I read that incorrect arch could cause this so i ran the file command. libcomposite.ko: ELF 32-bit LSB relocatable, ARM, EABI5 version 1 (SYSV), BuildID[sha1]=3a49e12c7809bbbdbdc3c5c5bd0fcd53e77dde44, not stripped i think module i built is not compatible with rt kernel i downloaded. I need to rebuild kernel…

Hello, I have following issue with HDMI resolution 1024x768. As soon as kernel starts loading, little light-green box 6x4px appears at the bottom-left corner of the screen and never goes away. The box always stays on top of everything including mouse pointer and vdpau-accelerated video, not visible on screenshots. Also HDMI sound is full of clicks in this resolution only. Other resolutions are ok. Seems that there is no problem with DVI 1024x768 (entire screen is greenish when connected by HDMI but i see that mouse pointer is visible in that area). First seen this on TV 42PC1RR which has native resolution 1024x768, also reproduced…

Hi all, I am using Orange Pi 0, I am trying to show some initial booting message on LCD. I am interfacing JHD204A which is a 20x4 charecter display.Which uses HD44780 controller. Is there a way to access Pi 0 GPIOs from Uboot? So that I want to show some initial message on L CD while Linux gets loaded. I appreciate any inputs, thanks in advance.

Hi guys, I was running my Orange Pi Zero Plus perfectly on the dev channel but I did an apt upgrade the other day and it seems to have broken something. I hooked it up to a usb serial device and here's the log: https://pastebin.com/jiB9TZdh Any ideas on how I can fix this? I can interrupt the boot process and I get to a screen where I can run limited commands but I'm not sure what to do at that point. I'm thinking it might be easier to just reflash and start again. This post is mainly for the devs to let them know there might be an issue with one of the kernels? Cheers.

Hi, I have a Opi zero 512 and did a fresh install Debian Buster with Armbian Linux 4.19.59-sunxi I installes the Linux-Kernel but I run into problems with compiling a driver. outdoorpi@orangepizero:~/usb-redirector-linux-armeb-gnueabihf/files/modules/src/tusbd$ sudo make KERNELDIR=/usr/src/linux-source-4.19.57-sunxi64 make -C /usr/src/linux-source-4.19.57-sunxi64 M=/home/outdoorpi/usb-redirector-linux-armeb-gnueabihf/files/modules/src/tusbd modules make[1]: Entering directory '/usr/src/linux-source-4.19.57-sunxi64' CC [M] /home/outdoorpi/usb-redirector-linux-armeb-gnueabihf/files/modules/src/tusbd/driver.o /bin/sh: 1: scripts/basic/fi…

I‘m using an OrangePi Lite with the intent to display a 4kp30 video to a 4k TV over hdmi. from reading through the forums I saw that mainline kernel does not support video acceleration - is this information current? after installing the Xenial Image with 3.4 kernel I manage to play 1440p video smoothly two ways with mpv: - windowed if display resolution is set to 4k -fullscreen if display resolution is set to 1080p if I try to run the 1440p video at 4k display resolution in fullscreen, the app crashes with messages about ‚not enough resources to create surface‘ and the framebuffer stays corrupted after that and I have t…

I noticed with the latest bionic image on the Duo it does a soft shutdown when you use the built in button. The problem is I use this button for my own uses. Can this feature be disabled and relinquish control of the button? gpioinfo | grep k1 line 3: unnamed "k1" input active-low [used]

Hi, I'm facing a problem with my Orange Pi Zero with the latest Armbian version. I noticed that when I provide an internet connection type that is not valid (wrong psk, ethernet but no cable plugged in, etc.) and I reboot the system, it hangs just before asking the username and password. Sometimes it takes up to 10 minutes before keeping going. These are the last boot logs that I see: [ 11.209226] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 11.219428] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 11.244988] systemd[1]: Started Nameserver information m…

Hi Yesterday I've upgraded armbian kernel from 20.11.3 to 20.11.6 version in the available updates with apt update. Once PiPC restarted no wifi connection was found. The wifi dongle is a TP-LINK TL-WN725N and is found with lsusb: Bus 004 Device 002: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter It was working with previous kernels but with 20.11.6 kernel is not listed in ifconfig so I've rolled back to 20.11.3 kernel Any hints or solucions ?? Thanks

Hi, I was trying to use OrangePi One to add a filter to my USB camera, so that I can apply some image processing to the original input image. The original project uses raspberrypi: https://github.com/likeablob/rpi-wfh-webcam It captures the image from a USB Camera, then applys some image processing on Raspberry Pi. Lastly, it creates a virtual camera that sends the output image to the PC. I would like to achieve the same effect using OrangePi One (Armbian), and the only problem left is to simulate a virtual camera using the USB Gadget. What I tried: $ sudo modprobe g_webcam musb-hdrc.4.aut…

Hello, I would like to connect RFID-RC522 to OPI 3 LTS My wiring as bellow VCC -> Pin 1 GND -> Pin 9 MOSI -> Pin19 MISO -> Pin21 SDA -> Pin24 SCK -> Pin23 RST None I wired it based on this chart Then I edit the armbianEnv.txt added Reboot . But still not see the /dev/spi Where am I wrong?

Greetings, I'm using latest Jammy on an OPIZ2. I've installed the Mate desktop and enabled the desktop with armbian-config. I get no HDMI output. Am I missing a step? Is the Mate desktop appropriate? Thanks. The system works with the vendor's debian distro, but I'd like something better.

I’m running Armbian debian minimal image on my Orange Pi Zero 3, using the onboard WiFi (wlan0) with the unisoc_wifi driver. The WiFi consistently drops with logs like these: [ 11.048517] unisoc_wifi wlan0: mixed HW and IP checksum settings. [259241.515808] unisoc_wifi wlan0: sprdwl_report_connection Asus failed status code:30! [345665.483530] unisoc_wifi wlan0: sprdwl_report_connection sm_state (5), status: (2)! [345665.483567] unisoc_wifi wlan0: sprdwl_report_connection Asus failed status code:1! NetworkManager also reports: link timed out. Activation failed for connection 'Asus' After the crash, restarting NetworkManager doesn’t reso…

Good evening! Thats my first post, I have for a year a Orangepi 3 LTS that I used for my kid, he looks that never switch off the unit by software and use the switch all the time, so suddenly the unit dont boot anymore, the SD card partition table was corrupt, so I mounted a new OS in another SD but does not boot, the green light is not coming anymore. So I connected a TTL to USB Serial device for debugging and it shows the following information: U-Boot SPL 2021,10-orangepi (Sep 06 2022 - 18:22:23 +0800) PMU: AXP806 DRAM: 2048 MiB Trying to boot from MMC2 NOTICE: NOTICE NOTICE NOTICE: INFOS NOTICE NOTICE: INFO: INFO: INFO? BL31: BL31: BL3…

I am a newbie here and newbie in Orange Pi One. Previously I have used Raspberry Pi in my daily projects. I burn Armbian 5.05 to my class 10 SD Card and after install the SD Card to the board. My Orange Pi One is booting properly but after automatic restart, my board doesn't continue to boot but the red LED is ON. I have tried to wait for 10 minutes but nothing work. This is my first booting https://www.youtube.com/watch?v=_RA68P_WZJY .

Hello dear friends, please help can not solve a problem, the entire forum has clambered! as I can not turn on your WiFi Orange Pi Pc + ....

I'm using an Olimex LIME2 board with an A20 processor (actually it's a Olimex A20-SOM, but that shouldn't matter) and trying to use PWM. I have an older image (jessie with Kernel 3.4) where the PWM hardware can be accessed through /sys/class/pwm-sunxi/pwm*/{duty, duty_percent, period, pin, polarity, pulse, run}. Now I'm building a newer image (xenial with Vanilla kernel). It has /sys/class/pwm, but the directory is empty. Any ideas? The fex file is the same for both boards; the relevant section is: [pwm0_para] pwm_used = 1 pwm_period = 10000 pwm_duty_percent = 50 [pwm1_para] pwm_used = 1 pwm_period = 10000 pwm_duty_percent = 50

Hi, im using an Orange Pi one with a camara. I bought it as a set: https://de.aliexpress.com/item/Orange-Pi-One-SET-9-Orange-Pi-One-and-Camera-Camera-with-wide-angle-lens-for/32660642513.html?spm=2114.13010608.0.0.8eWICb I've flashed armbian to the SD Card and fired it up. The Problem I have is, that I can't access the camara. Maybe I'm doing something wrong, or the camara is broken. What I've done so far, is following this tutorial: https://diyprojects.io/camera-2mp-orange-pi-unpacking-installation-test-motion/#.WSw0jbpuKUk and then red through following article: http://www.orangepi.cn/orangepibbsen/forum.php?mod=viewthrea…

Guys, please help. I installed one orange pi plus 2e and orange pi one in following way: first server image (legacy kernel) then kernel upgrade to mainline. Everything works just fine, except I do not receive kernel updates. If I understood well, kernel should be upgraded via apt dist-upgrade.. But nothing. On both this machines I've got same situation: Welcome to ARMBIAN 5.31 stable Ubuntu 16.04.3 LTS 4.11.5-sun8i igor@orangepione:~$ uname -a Linux orangepione 4.11.5-sun8i #11 SMP Fri Jun 23 20:03:23 CEST 2017 armv7l armv7l armv7l GNU/Linux in my apt sources I have: igor@orangepione:~$ grep -h ^deb /etc/apt/sources.…

Hi Everyone, I'm making a project about video and i want to export video to AV and HDMI without Desktop GUI. (i'm using armbian from https://dl.armbian.com/orangepizero/Ubuntu_xenial_default.7z). I reseached many documents, armbian-build resource, but i don't know how to make it! I have tried play video on Desktop GUI, it work fine! (mplayer, mpv) But without Desktop GUI, is it possible? Thanks!

Hi all, i am completely new to armbian and to be honest not yet completely convinced to change from bananian even that the time should have come. Until now, on my Bananapi M1, bananian was running without any problems. A few days ago, i tried to get familiar to armbian (debian stretch) for the first time on a test-SD-card. Now my problem: Since these tests, i am not able anymore to shutdown my running bananian-system to power off. The system seems to halt, but the power is not turned off and a few seconds later the Bananapi restarts. The problem remains even on a clear bananian1604-image. But: On the testSD-card under armbian the shutdown comm…

Hello, I have an an orange Pi plus 2+. I had installed armbian ubuntu 18.04.2 on it. I used it only on wired network, and I experienced that the downloading speed is perfect, but the uploading speed is very slow. So at the network synchronous, the upload is same fast as download. On the same wiring and with another device I have not noticed this phenomenon before. Do you know what can be the reason of this? Speedtest:

Armbian Jammy (Minimal CLI) boots/works fine from an SD Card. (Armbian_23.5.2_Nanopi-r1_jammy_current_6.1.30_minimal.img.xz) apt update && apt upgrade -y && apt autoremove apt install armbian-config -y armbian-install I choose option #2 - Boot from eMMC - System on eMMC Accept the warning. I choose option #1 - ext4 The install appears to move along smoothly. I choose the "Power Off" option. Pull the power, remove the SD Card. Reconnect the power. I never see the "heartbeat" on the "System"(red) LED. The NanoPi never boot or obtains an IP address.

Hi, I have Armbian_community_24.8.0-trunk.6_Orangepizero2w_bookworm_current_6.6.31_minimal on my Orange Pi Zero 2W. It has an expansion board but the ethernet port does not work on it. ip a show eth0 >> Device "eth0" does not exist. Only the Wi-Fi works.

Hi, is the image for the M1 and Pro the same? Because after downloading, the file name is "Armbian_5.04_Bananapipro_Debian_jessie_4.4.3". On the download page for M1 and Pro the download links point to the same file. Looking at http://mirror.igorpecovnik.com/i see only 5.00 for the M1. Another question i have: After the login i see 12 updates and i should run APT. Since years I'm using aptitude since it is the preferred and newer program for Debian. So the question is if i can safely use aptitude? Or is there something pre-installed and i mix up the package management. I will never understand why every tutorial on the web is using APT.

Hello, I'm new to SBC and have to fire my newly received Orange Pi PC. Should a Vanilla kernel download be soon available, or is it adviced to go to the legacy one? I would be happy to know, in order to start my project on a base that would not need to big modifications for the coming monthes. Best regards, JMF

Hey everyone. I have an MK802 II stick, which has the A10 s.o.c, so i use the Olinuxino Lime a10 image on it. Everything works pretty much fine, except one little thing. This machine has worked fine with non-standard resolutions, like 1440x900, or 1280x1024. Now, when i turn it on, the U-boot screen appears correctly, it even shows that it set the resolution to 1440x900, and after that, the monitor says "signal out of range". Of course, it works well with a 1080p monitor, but i wanted to use this one too. Thanks!

Finally Orange PI Family gets the 4.x kernel support.But there is no Vanilla Kernel on Orange PI PC.Please add the support on Orange PI PC.Thx!

Hello, I've noticed that my Orange Pi Zero starts throttling at 65C and it will just freeze up until I give it a nice BJ so it cools down. Is there a setting that I can tweek to increase that? Im running the latest Armbian image from the download page. P.S. - I know the risks of running it at high temperatures and so on and so on and so on... at 7$ a pop I really really do not care.

Hi i have a orange pi lite,i try this https://yudanta.me/installing-wi ... orangepi-pc-device/ in armbian terminal but after the installation i try with my button arcade on gpio pin but never working,if onyl work 5v with ground(make reset button) i have used many button and switch but work only the reset button Where is wrong? thanks

Hi, I'm using a xenial system with Kernel 4.9.11-sunxi on LIME2 (actually it's an Olimex A20-SOM with external RTL8211 PHY) and trying to prevent the ethernet from coming up on boot. When turning the system on, the ethernet interface will assign a random MAC address; later on my script sets a proper MAC from an assigned range. Until then the eth0 interface must stay down to prevent the network from being spammed with bogous messages. This is because the ethernet interface chooses a random MAC address when the system boots up; later on a script sets the proper MAC address from an assigned range (along with IP and route configuration); The link must stay down un…

Is the Cubieboard 2 a true Mac Address or is random generated or fixed in firmware ? Thank you very much.

Hi all, I was struggling to have a stable Wifi connection on my new Orange Pi Primes, and believe I found a solution, so I thought it's nice to share it Symptoms: Wifi would connect right after reboot, but would disappear if Orange Pi Prime was idle for about 30min. The only way to reactivate would be to either pull the cable out (as there are no buttons yet), or to login via ethernet, perform ifconfig down && if config up. I didn't liked either of the options, so I decided to investigate. My log was full of: [89201.577208] RTL8723BS: nolinked power save enter [89201.967063] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is n…

Hi to everyone, I'm using "Armbian_5.38_Orangepizeroplus_Debian_stretch_next_4.14.14" on a Orange Pi Zero Plus H5 I'd like to test this new board by working with processor overclocking. But it seems to me that it is leased at 816Mhz maximum. Can someone tell me how to take it to 1200Mhz or more? Thanks Antonio

We are in the process of migrating from NanoPI NEO's to NanoPI NEO Core's as part of that we are moving to mainline NEO Air / NEO Core images. I noticed that audio playback is soft / fades in at the start of the file. This only seems to occur on mainline images. Thoughts?

Working from the documentation here: https://docs.armbian.com/Developer-Guide_FEL-boot/#what-is-felnfs-boot. Not much luck so far with an FA NanoPi K1 Plus. Please see below for details. TIA.

Kinh nghiệm mở shop đồ chơi trẻ em? Đồ chơi trẻ em là luôn luôn cần thiết và là sở thích tất yếu của con trẻ ,giúp con trẻ phát triển các kỹ năng trí tuệ toàn diện, nhất là những sản phẩm mang tính giáo dục. Các bậc phụ huynh ngày càng có nhu cầu cao về những sản phẩm, đồ chơi an toàn cho con,, giúp con phát triển về tinh thần, trí tuệ và thể lực. Chính vì lẽ đó mà cửa hàng đồ chơi đã ra đời và thu hút nhiều khách hàng. Đầu tiên để kinh doanh thì bất kì mặt hàng nào chúng ta cần có nguồn vốn ổn định và đồ chơi trẻ em thì cũng không ngoại lệ. Nếu bạn cảm thấy thiếu vốn thì có thể Vay tin chap tại các ngân hàng, lãi suất cũng rất thấp. Bạn phải dự tr…

I have had similar issues what somebody had on this forum but I cannot post reply because the topic is closed. But I found solution. You need to downgrade u-boot with following commands. For Olimex Micro: apt-get install linux-u-boot-next-micro=5.60 Tested on ARMBIAN 5.60 stable Ubuntu 18.04.3 LTS 4.19.84-sunxi For Olimex Lime2: apt-get install linux-u-boot-lime2-emmc-next=5.30 Tested on Ubuntu Bionic with Armbian Linux 4.19.81-sunxi

After few hours wlan0 lost connection for unknown reason (reason=0) and then it looks like some kernel module crash. Is it driver problem? Any suggestion will be very appreciated! Dec 31 19:22:05 tns_3np wpa_supplicant[1097]: wlan0: CTRL-EVENT-DISCONNECTED bssid=40:b0:76:58:52:d8 reason=0 locally_generated=1 Dec 31 19:22:05 tns_3np wpa_supplicant[1097]: p2p-dev-wlan0: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD Dec 31 19:22:05 tns_3np wpa_supplicant[1097]: p2p-dev-wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=CZ Dec 31 19:22:05 tns_3np NetworkManager[812]: <info> [1577816525.4151] device (wlan0): supplicant interface …

Hello, I have an orange pi plus 2 device. but Armbian 5.69 (5.75 or latest version) above Orangepiplus Ubuntu xenial default can be the url for desktop version. Can you please give me the working url? (By the way, I couldn't find a section for orange pi plus 2 in the forum. )

Hello, I am a beginner on NanoPi. I had a NanoPi neo 512M, and I am searching for a campatible image for it. unfortunately, I didn't find my device in the list but I found NanoPi Neo 2 instead. I believe that its image is not compatible with my device so, can anyone give some hands to have a compatible image? thanks in advance

Hi, I am trying to get a led matrix to work via the SPI interface but cannot get it to work. I have enabled the interface and have an spi-device under /dev and there is a spi-module loaded. I have tried to connect MOSI and MISO to run spidev-test and everything seems to be fine but when I connect the led-matrix simply nothing happens. I can run the example-scripts from the luma-matrix library without getting an error - but there is simply nothing appearing on the matrix - however it does light up when I touch it on the backside... i have tried to use different values for param_spidev_spi_bus and param_spidev_spi_cs in a…

It seems there are no any on-board wifi nodes (vcc33-wifi, vcc-wifi-io, wifi-pwrseq ) in sun50i-h618-orangepi-zero2w.dtb , and exists in Zero 3 dts . zero2w.dts: type_addr_wifi = <0x02>; zero3.dts: type_addr_wifi = <0x02>; zero3.dts: vcc33-wifi { zero3.dts: regulator-name = "vcc33-wifi"; zero3.dts: vcc-wifi-io { zero3.dts: regulator-name = "vcc-wifi-io"; zero3.dts: wifi-pwrseq { zero3.dts: reg_vcc33_wifi = "/vcc33-wifi"; zero3.dts: reg_vcc_wifi_io = "/vcc-wifi-io"; zero3.dts: wifi_pwrseq = "/wifi-pwrseq";

Today I noticed that last Sunday a community version of Armbian was released with Orange Pi 4A support. I tried to flash it in different ways just in case, but it just wouldn't boot. I used BalenaEtcher, Rufus and Armbian Imager and neither of them worked. Im new in this stuff, so I wanted to know if someone could tell me if it is something I'm doing wrong.

Hi, As I saw some people were able to use docker on CubieTruck : https://dzone.com/articles/cross-platform-hybrid-cloud https://dzone.com/articles/big-data-processing-arm-0 As there are also some images for Raspberri/docker like http://blog.hypriot.com/getting-started-with-docker-on-your-arm-device/and as in the changelog of the kernel, docker is mentionned, I would like to know how to install & use docker on my cubietruck. Did someone achieve that ? I'll be quite interested to do a docker cluster of my Rasp & Cubietruck for my self hostiing needs Maybe this could help too : https://github.com/umiddelb/armhf/wiki/Installing,-running,-using-docker-on…

Hi! I have recently installed Armbian 4.5 (Debain Jessie and Ubuntu trusty) at Banana Pi M2, and I’ve noticed that the computer doesn’t reboot after the command. It simply switches off, and the red diode lights up. How it could be corrected?

Is there anywhere examples, samples or tests for CAN driver using MCP2515 controller via SPI ? Board is Pcduino3-nano with Armbian5 & Mayby, any other CAN driver usage demo or samples on Pcduino3-nano ?

Hi! Cubieboard a20 on boot for new armbian`s dont blink led`s I dont know sucessful load or not! On Cubieboard a10 one led blinking!

I upgraded a cubieboard2 to kernel 5.11 and noticed that I have one core online and one core offline. Can someone confirm that?

Hi guys, I installed last armbian on Banana Pi M2+, and execute nand-sata-install.sh to boot armbian from emmc, it works fine. I want system boot from emmc, and storage some data to sd card, so I prepare one sd card with ntfs partition, insert to Banana Pi M2+, and boot. It cannot boot, and message are: U-Boot SPL 2016.05-armbian (Jun 23 2016 - 09:59:04) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2016.05-armbian (Jun 23 2016 - 09:59:04 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 (SD), SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial…