SBC News

Description KASRL-supported u-boot 2024.07 for everyone: move /chosen/kaslr-seed DTC node support patchset to general 2024.07 BOOTPATCHDIR attach nanopi-r5c and oprangepi5-plus BOOTPACHDIR to patches/uboot/v2024.07 general dir Hopefully, other boards using same uboot-version can benefit from the added support note for Maintainers - to enable KASLR seed, you need: - CONFIG_RANDOMIZE_BASE=y configured in your kernel .config - CONFIG_CMD_KASLRSEED=y and CONFIG_DM_RNG=y configure in your u-boot .config - exposed crypto and rng nodes in you board's device-tree - kasrlseed command before kernel boot in your boot.cmd - CONFIG_SECURITY_DMESG_RESTRICT=y in kernel .config is a…

Description Replace absolute path to git-tree with relative, so it is accesible without docker builder. was: $ cat cache/sources/linux-kernel-worktree/6.2__jethome64__arm64/.git gitdir: /armbian/cache/git-bare/kernel/.git/worktrees/6.2__jethome64__arm64 new: $ cat cache/sources/linux-kernel-worktree/6.2__jethome64__arm64/.git gitdir: ../../../git-bare/kernel/.git/worktrees/6.2__jethome64__arm64 Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Build ok [X] Access to git tree without docker builder ok Checklist: [ ] My code…

Description Add a tool named bootconfig to manage boot files. If it's OK, I will update all bootscripts to support it. The previous discussions are in #5076. How Has This Been Tested? [X] Build [X] apt install linux-image-current-meson and reboot to current [X] apt install linux-image-edge-meson and reboot to edge [X] apt purge linux-image-edge-meson and reboot to current Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings ✕ Any depe…

riscv64: fixes/skips for building (sans Docker) ON riscv64 oci-oras: use ORAS 1.2.0-beta.1 for riscv64 prepare-host: add libffi-dev host dependency, needed for Python3 setuptools (when prebuilt wheel not found) fixes errors that show up only when building on non-arm64/amd64, when there's no prebuilt wheel (eg on riscv64) shellcheck: skip running shellcheck, with a warning, if running on riscv64 someone go add riscv64 to https://github.com/koalaman/shellcheck batcat: skip running batcat, with a warning, if running on riscv64 someone go add riscv64 to https://github.com/sharkdp/bat View the full article

Description I thought edge would carry the fixes forward, missed 6.4 folder. How Has This Been Tested? Carryover from 6.3 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Ubuntu noble is released and I just updated rk multimedia packages for it: https://launchpad.net/~liujianfeng1994/+archive/ubuntu/rockchip-multimedia/+packages?field.name_filter=&field.status_filter=published&field.series_filter=noble widevine package is renamed to libwidevinecdm0 because I borrow it from raspberypi: https://archive.raspberrypi.org/debian/pool/main/w/widevine/. It does not work at the moment but I don't want to get back to jammy's one which has to patch glibc. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh …

rk322x family: disable addgroup calls that are intended for image (chroot) but are running on host rk322x family: disable addgroup calls that are intended for image (chroot) but are running on host fixes building rk322x-box on bare metal / non-Docker View the full article

rk322x family: use run_host_command_logged() for u-boot postprocessing (so DDR blob used shows in debug logs) rk322x family: use run_host_command_logged() for u-boot postprocessing (so DDR blob used shows in debug logs) cosmetical change for future clarity View the full article

Description As suggested by @amazingfate here, rkvdec libreelec-imported patch is breaking edge compilation due to mainlined changes in kernel 5.19.2. This PR fixes the patch How Has This Been Tested? [x] rk322x deb packages complied properly Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject, by forum user request - nothing fancy, just an ID added to some source code files How Has This Been Tested? [x] Compiled current 6.1 kernel [x] Compiled edge 6.4 kernel Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Minor change to emmc-pins overlay: add power sequence for both emmc and sdcard. May provide some better compatibility. How Has This Been Tested? [x] Tested on several tvbox boards, none of them regressed Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject: esp8089 is a low-end 802.11n wifi chip that has been found on several tv boxes. Add proper driver to mainline kernels (both current 5.15 and edge 5.19) to properly support it. Also does minor tweaks to overlays/config scripts to bring per-board hardware configuration into board/led-conf overlays. How Has This Been Tested? [x] Compiled deb packages for current kernel and tested on live installation [x] Compiled deb packages for edge kernel and tested on live installation Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-u…

Description As per subject How Has This Been Tested? [x] Built Debian Bullseye minimal image and successfully boot on rk322x board Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Bump rk322x-edge to kernel 6.3 How Has This Been Tested? [x] Successfully compiled kernel deb packages Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description update libreelec patches to latest bits rework dtb patches due to new arch/arm/boot/dts layout rework some patches that need fixing fix led overlays due to idiot u-boot dtbo apply bug How Has This Been Tested? [x] Debian bookworm minimal image built and tested Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject, bumps rk322x family to kernel 6.0 How Has This Been Tested? [x] Compiled deb kernel packages and tested on a live system Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject, IPX code has been commented out in the rtl8723cs to avoid inclusion of ipx.h header file which has been removed in recent kernels How Has This Been Tested? [x] Compilation of current 5.15 kernel works Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description This PR will convert the existing dtb and dtbo patches into dt/overlay directories as in rockchip64 and other families for easier future handling of device trees. Also fixes a weird u-boot bug for device tree overlays and bring full support for R29_MXQ, R2B_MXQ and H20 boards. No other families other than rk322x have been touch by this PR. How Has This Been Tested? [x] Debian Bookworm images built and tested on live machine [x] Compiled current kernel 6.1 and tested on live installation Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to…

Description General rk322x current and edge device tree tidying up: added proper coolings maps to handle overheating enabled DEVFREQ_THERMAL config option to let devfreq devices be used in cooling maps generic tvbox ir remote kernel mappings were missing in current 5.15 kernel, added patch removed unneded patches restored AUFS config options for edge kernel How Has This Been Tested? [x] Current kernel debs built and tested on live system [x] Edge kernel debs built and tested on live system Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-underst…

Description ssv6051 driver has been plagued by missing ARP request handling, so the wifi did not answer to identification requests on broadcast packets. This PR fixes the general problem related to broadcast and multicast handling. Also remove a unapplicable patch from a LE imported patch series. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build edge kernel package and test on live system [x] Build current kenrel package and test on live system Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my…

Description emmc and sdio clock registers on rk322x were not exactly properly configured in kernel source code, causing the clock to be not precisely aligned. This was particularly evident during initial detection of emmc and sdio devices and also was clashing with a recent addition to mainline kernel (this commit) This PR corrects the kernel code in current and edge branches (6.1 and 6.2) to fix the thing and possibly increase compatibility, going from this: [ 2.194866] mmc_host mmc2: card is non-removable. [ 2.206312] mmc_host mmc2: Bus speed (slot 0) = 2343750Hz (slot req 400000Hz, actual 390625HZ div = 3) [ 2.385689] mmc_host mmc2: Bus speed (slot 0) = 5000…

Description A recent couple of patches, introduced in mainline kernel 6.1 to fix some rk356x emmc detection, break the detection of some old emmc parts on rk322x. This PR reverts the kernel 6.1 patches until some more investigations are done to better understand the nature of the issue and if it can be solved without disturbing the mainline kernel. Anyway this is confined into rk322x family, so anyone else is not affected by. How Has This Been Tested? [x] Built full image and tested on the problematic rk322x device Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, parti…

Description Slim down the dmc driver for rk322x for 5.15 and 6.1 kernels: the patch was carrying also the rk3328 driver, but was unnecessary. Also fixes various code misunderstandings that may cause crashes at startup and now uses managed driver resources with devm_* calls in place of doing everything manually. How Has This Been Tested? [x] deb kernel packages compile without errors Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x…

Description Some rk322x boards (notably those with X96-Mini signature) are stuck in a bootloop. The cause has been identified in the tsadc node and in particular is related to what is described in this kernel pull request. This PR simply removes the pinctrl properties, so the GPIO pin that does the reset on these board is left as per default, thus not causing any unwanted reboot. How Has This Been Tested? [x] Device tree has been compiled without errors Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made correspondin…

Description As per subject: did a mistake and usb otg port got disabled. This PR enables usb otg port for current and edge kernels. How Has This Been Tested? [x] Compiled device tree with success on current kernel branch Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject How Has This Been Tested? [x] Built edge kernel deb packages [x] Built current kernel deb packages Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Uboot v2024.01 leaves HDMI/VOP and USB ports in a state that is not liked by vendor kernel tools (eg. the Multitool), thus making their usage difficult or impossible. These patches will assert the resets for HDMI, VOP and USB ports and deassert them on uboot exit, so the kernel (any kernel) will find them in active and "clean" state. Nerd note: the USB nodes in uboot device tree do not have the reset properties. Adding the reset properties makes the USB ports undetectable to the kernel because uboot - on purpose - leaves the devices with the reset asserted. To let the kernel detect the ports, you have to add the reset properties in the kernel device tree too…

Description Increase the maximum number of AP connected clients to 16 instead of 4 for ESP8089 driver for rk322x family on kernels 5.15, 5.19, 6.0 and 6.1. The patch is trivial How Has This Been Tested? [x] Packages for kernel 6.1 have been compiled and installed onto a running installation [x] The driver has been tested with up to 6 connected clients and worked with no issues Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any …

Description Introduce a driver that leverages the virtual poweroff feature of Trust OS for rk322x that allow Power On with IR remote controller KEY_POWER. It brings the board into suspended state (ie: "virtual poweroff") on shutdown and resumes power when the user pushes KEY_POWER of the remote controller. This is for current 6.1 and edge 6.5 kernels on rk322x family, but it could be possible to extend to other rockchip socs with minor changes. The driver may need some polishing here and there, but it already very usable. To be enabled, it requires the ir-wakeup overlay. How Has This Been Tested? [x] current kernel compiled and tested on live debian bookworm system [x…

Description Minor fixes to led-conf6, default phase shifting for emmc controller se to 90° instead of 180° that was causing some eMCP to be not detected even in high-speed mode How Has This Been Tested? Quick check directly on a live installation Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject, move the rk322x edge kernel to 6.2 How Has This Been Tested? [x] Built fresh image and tested on rk322x device Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Some forum users got issue due to exotic 1.5gb ddr emcp chips; this updates the ddrbin blob for the imminent release and solve their issues. How Has This Been Tested? [x] Image compiled and tested on a couple of rk322x boards Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject, fixes the esp8089 driver to allow module remove without errors and leave the hardware in cold state to allow further module insertion. Not a great deal, can even wait after release, but only deal with CSC boards so should not be too worrisome. How Has This Been Tested? [x] Module has been tested [x] Current kernel debian packages compile [x] Edge kernel debian packages compile Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes gene…

Description As per subject, plus kernel configs have been updated and enabled rtl8xxx untested wifi chips How Has This Been Tested? [x] Kernel patches apply with current kernel [x] Kernel patches apply with edge kernel Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Various minor fixes to rockchip rk3318/rk322x based tv boxes: usb ports gain resets in uboot and kernel, so hopefully they gains some more compatibility and/or less hangups rk3318-box now uses the ddrbin from vendor; it was accidentally switched to uboot TPL during last uboot update some patches have been removed because useless or because things could merged into board dtbs Except for a change in dwc2.c driver in rockchip 32 bit (that may have an effect on OTG port on ASUS Tinkerboard, which is usually unused due to being the power connector), no other boards are affected by these changes. It looks like that USB resets,at least on rk3318/rk3328, are good …

Description This would enable uboot BTRFS support to allow booting from a sole BTRFS root/boot partition. With this feature u-boot.itb file size increase from 826K to 902K. AFAIK this size increase is not an issue given that we have almost 8MB space for uboot before the first partition. How Has This Been Tested? [x] Compile [x] Boot rk3318 box with sole BTRFS root partition Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dep…

Description Some people is complaining in the forums, thus it is better to revert this back to 333mhz How Has This Been Tested? [x] kernel and image compilation works Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Add uboot 'button' cmd and add Recovery button to rk3318 uboot dts. In the linux kernel dts button is labeled lowercase "recovery", but I've chosen "Recovery" as it is more frequent in uboot dts'es: $ (cd cache/sources/u-boot-worktree/u-boot/v2022.07/arch/arm/dts; grep -ir 'label.*"recovery"' .) ./rk3399-nanopc-t4.dts: label = "Recovery"; ./rk3399-khadas-edge.dtsi: label = "Recovery"; ./rk3399-roc-pc.dtsi: label = "Recovery"; ./rk3328-rock-pi-e.dts: label = "Recovery"; ./rk3066a-mk808.dts: label = "recovery"; ./rk3399-nanopi-m4b.dts: label = "Reco…

Description Enable uboot gpio command. This would allow to set up rk3318-box'es LED display in custom uboot script. For example, to show "boot", this snippet can be added (gpio pins and letter codes should be adjusted for different STB/LCD models): FD650_MODE_WRCMD='0 1 0 0 1 0 0 0' DISPON='0 0 0 0 0 0 0 1' FD655_BASE_ADDR='0 1 1 0 0 1 1 0' Z='0 0 0 0 0 0 0 0' B='0 1 1 0 0 1 1 1' O='0 1 1 0 0 0 1 1' T='0 1 0 0 0 1 1 1' setenv d0 gpio clear C22 setenv d1 gpio set C22 setenv LC gpio clear C19 setenv HC gpio set C19 setenv send 'run d0 LC; for b in $cmd; do run d$b HC LC; done; run HC d1' cmd="$FD650_MODE_WRCMD 1 $DISPON 1" run send cmd="$FD655_B…

Description as the RK3328 USB3 phy driver adaptation from legacy kernel is no longer needed or compatible with Mainline, remove it. 2 affected boards: Station M1 is no longer supported by the Rockchip64 kernel, remove it's specific patches OrangePi R1 LTS refers to the PHY driver-introduced node to control an LED. remove that node. How Has This Been Tested? Build tested Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any depe…

Description outdated PHY driver no longer necessary, incompatible with 5.15. RK3328-roc-pc was not adjusted, no board to test. With it transitioned we can eliminate the phy driver patch entirely. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. Renegade and Rock64 v3 both tested Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings…

Description RK3328 devices often have I2S1 bus available on expansion pins. This PR introduces an overlay to enable the I2S1 bus for Rock Pi E to enable external PCM5102 DAC; I2S1 is shared for internal audio codec and external GPIO pins, so the overlay also disables the internal audio codec. This has been tested and proved to work on Rock Pi E, should work on other boards with similar board wiring setup, but can be also used as a base for other board/DAC combos in the future. Jira reference number AR-1670 How Has This Been Tested? [x] Kernel compiles successfully with patch applied [x] Manually installed the dtbo on a living community image for rockpi-e running edge…

Description This patch has been mainlined in the kernel for both v6.6.37 and somewhere in v6.9.y branch too.. There are several reports that it broke rk3328 pinctrl and, as the worst side effect, eMMC controller does not work anymore on rk3318/rk3328 (reports on the forums: this, this and this) I identified the single line that is causing the issue; reverting the single change fixes the bad pinctrl behaviour in my case. How Has This Been Tested? [x] built and tested kernel 6.6.37 on live system [x] built and tested kernel 6.9.9 on live system Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My…

Description One user on the forum (see https://forum.armbian.com/topic/27798-orange-pi-4-lts-default-thermal-trip-point-issues/) found issues with Orange PI 4 LTS thermal trip points. Looking into the problem, it is related to a patch introduced long time ago that changed the thermal trip points away from the vendor (and mainline kernel too) supplied ones. After some stress testing with openssl and mbw combined, my board froze and I had to shutdown it manually, let it cool and restart to have again a working system. It happens that, at least on my and forum user cases, the trip points are not doing what they expect to do. This patch corrects the trip points for Opi4 LT…

Description As per subject, implements same fix as https://github.com/armbian/build/pull/5216, but for kernel 6.3 How Has This Been Tested? [x] Patch applies [x] Bare dtb tested on live system Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

rk3568-odroid edge 6.6: bump to 6.6-rc6 rk3568-odroid edge 6.6: bump to 6.6-rc6 View the full article

Description nanopi-r5s device tree now in 6.5 and uboot RC. borrowing odroid-m1 family for now. verified working. NVME needs attention. View the full article

Based on the works done by @lanefu for the same RK3568 NanoPi R5S, with ethernet interface name updated and corresponding LED dtb overlay. Tested with a local built Armbian-unofficial_24.2.0-trunk_Nanopi-r5c_bookworm_edge_6.6.4_minimal.img on my NanoPi R5C: [✔️] Boot with SD card. [✔️] Install into eMMC and boot from eMMC. [✔️] LAN / WAN interface renamed and corresponding LEDs work with link status change. View the full article

Description Add LED's, fusb302 (doesn't do anything yet), theoretical sound card support. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. builds/boots, lights flash Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description The general improvements for RK3588 on 6.9 and 6.10 weren't as many as we've hoped, but still this is what was mainlined: USB3 DRD support, including PHY usbdp HDMI PHY GPU We already had most of those features patched in via patches, but this gives us the chance to finally be able to remove those and stay closer to mainline. -> PR summary: (+5,895 - 28,098) ~= 22,000 lines less 👍 (meaning less hassles in the future, less maintenance needed) In addition to that, I have also updated our patch to support RK3588 thermal sensors and management, enabling and improving the use of cooling fans. This patch also includes updates for CpuFreq and OPP. We had an o…

Description Add a patch series to support VEPU121/VPU121, which mainly enables hardware decoding for H.264. It can also decode MPEG2 and VP8 as well as do JPEG encoding. Usually I am against bloating the kernel with patches since it makes it more difficult to maintain. But having access to the RK3588's H.264 decoder is really useful for day to day tasks. How Has This Been Tested? [ ] Needs some testing View the full article

Description armsom-sige7: enable gpu rock-5a: enable gpu, fix poweroff, enable pcie2x1 for M.2 E slot hinlink-h88k: enable gpu How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=armsom-sige7 BRANCH=edge DEB_COMPRESS=xz [x] Tested with armsom-sige7, rock-5a and hinlink-h88k Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new …

Description duplicated existing SATA2 overlay for SATA1 used on Rock5b and probably others. I know in the legacy kernel the equivalent patch is board specific, but will stay generic for now.. plus I didn't see where to disable wifi or BT interrupts in current device tree. working with port multiplier root@rock-5b:~# uname -a Linux rock-5b 6.7.0-rc8-edge-rockchip-rk3588 #4 SMP PREEMPT Sun Dec 31 20:51:25 UTC 2023 aarch64 GNU/Linux root@rock-5b:~# dmesg|fgrep -i sata [ 0.890642] ahci-dwc fe220000.sata: supply ahci not found, using dummy regulator [ 0.891363] ahci-dwc fe220000.sata: supply phy not found, using dummy regulator [ 0.892281] platform fe220000.sata:sa…

Description While the NanoPi R6C can in theory also use an Armbian image built for the NanoPi R6S like described on the Armbian website, it was not a user-friendly solution at all. Add the R6C as separate board with support for the latest mainline U-Boot. The R6S is a solid little machine with one M.2 slot for a NVMe SSD as well as two Ethernet ports (1x 1G, 1x 2.5G), two USB-A (USB2 and USB3) ports and even an integrated chip for UART debugging, so you only need to connect a USB-C cable for debugging instead of the three cables with a separate UART-USB adapter. Wiki link: https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R6C Hardware specs: SoC: Rockchip RK3588…

rk3588: bump default blobs (DDR:1.16, BL31:1.45); remove board-specific blobs from boards that used those versions rk3588: bump default blobs (DDR:1.16, BL31:1.45); remove board-specific blobs from boards that used those versions in practice: boards that didn't specify their own blobs: bump DDR 1.08->1.16 ; BL31 1.28 -> 1.45 (example: rock-5b!) boards that specified 1.16/1.45 individually now follow the defaults (no change) boards that specified a different version: no change; just a TODO suggesting review/removal/go-with-the-defaults Mekotronics boards: bump from 1.11/1.38 to defaults (1.16 / 1.45) View the full article

Description 6.11-RC4 was released on 2024-08-18 (https://kernel.org/). rewrite-kernel-patches results in no diff. How Has This Been Tested? [ ] ./compile.sh BOARD=nanopi-r6c BRANCH=edge BUILD_DESKTOP=no BUILD_MINIMAL=no EXPERT=yes KERNEL_CONFIGURE=no RELEASE=trixie EXTRAWIFI=no kernel Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code View the full article

Description tiny housekeeping. update major_minor to match collabora tree View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Someone tested with rock5 Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes genera…

Description Enable the current kernel branch for some RK3588 boards, which was introduced in https://github.com/armbian/build/pull/6699 current is kernel version 6.8 at the moment and should stay a more stable alternative than edge, which is often a rc kernel. This is useful when using the board as daily driver for example or when you don't want anythign at all to suddenly break. current will stay at the next LTS kernel once released. I did not enable it for every board at once, only the NanoPC T6 and the CM3588 NAS for now. Feel free to add a commit to this PR or let me know if you'd like to enable current on a specific board. How Has This Been Tested? [x] ./compile.…

Description RTL882XCE wireless card need rtw88 driver, just enable it. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Kernel build success [x] My RTL8822CE works well. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

rk3588: experimental UEFI edk2 support core extensions: fix: don't redefine extension_function_info when recursing otherwise when there's a chain of enable_extension() we lose the original info extensions: grub-with-dtb: add UMS menu entry to GRUB if initramfs ums hook is detected this allows user to enter UMS mode from GRUB for usage with the initramfs-usb-gadget-ums extension has no effect unless initramfs-usb-gadget-ums extension is enabled together with grub-with-dtb extensions: initramfs-usb-gadget-ums: kernel cmdline enables initramfs UMS of all block devices this optional extension adds an initramfs script that: enumerates and filters all block devices exp…

Description When testing the wip build for the NanoPC-T6 I realized that there were no kernel modules for DVB available, so I changed the kernel config to include all kind of DVB/Camera/Radio drivers in the kernel multimedia section. How Has This Been Tested? On a NanoPC-T6 16GB RAM/256GB eMMC [x] Build for Bookworm OK [x] Booting fine without notable errors from sdcard as well as from emmc [x] dvb modules for 2x DVBSky S960 loading fine Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

rk35xx-legacy: 0000.patching_config.yaml with incremental: true for rk 5.10 vendor kernel patching: support 'incremental' Makefile auto-patching, for vendor kernels without incremental: true: we replace the DT Makefile based on *.dts at the DT directory after all patching/copying is done overlay target is added if overlays present with incremental: true: we parse the Makefile, parse the DTs being built, and only add .dts's we have added from 'dt' directory overlays target are not added; we assume smth else already added them rk35xx-legacy: 0000.patching_config.yaml with incremental: true for rk 5.10 vendor kernel allows users to put .dts files bare in userpatch…

Description Add the patching config file for rk35xx-vendor to easily patch in dts files by putting them in the dt folder. How Has This Been Tested? [x] Put new dts files in patch/kernel/rk3588-vendor/dt and successfully ran ./compile.sh build BOARD=nanopc-cm3588-nas BRANCH=vendor BUILD_DESKTOP=no BUILD_MINIMAL=no KERNEL_CONFIGURE=no RELEASE=bookworm. New patches were applied. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any d…

Description Enable rk3528 soc support to make rk3528 boards bootable. Enable lima gpu driver for mali 400/450 gpu on rk3528 and disable arm mali400/450 driver. Devicetree related change is already in https://github.com/amazingfate/linux-rockchip/commit/419410ff56c8e80b37e100c265d57f23cc0db835 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=hinlink-ht2 BRANCH=vendor DEB_COMPRESS=xz KERNEL_CONFIGURE=no [x] Lima gpu driver works on hinlink-ht2 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a s…

Description Rockchip has released new sdk with rk3576 support and kernel's tag is linux-6.1-stan-rkr3. I have rebased commits from rkr1 to rkr3 and this pr depends on https://github.com/armbian/linux-rockchip/pull/200. Prebuilt kernel can get downloaded from github actions: https://github.com/armbian/linux-rockchip/actions/runs/9740746614?pr=200 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh BOARD=rock-5b BRANCH=vendor DEB_COMPRESS=xz KERNEL_CONFIGURE=no KERNEL_GIT=shallow [x] Kernel boots fine on rock5b. [ ] rk356x boards need test [ ] rk3528 b…

Description The vendor config of rk35xx is originally for rk3588 which doesn't need this driver. But rk3568 need it. CONFIG_NET_VENDOR_MOTORCOMM=y is introduced by rewrite-kernel-config, I guess it should be fine. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh BOARD=hinlink-hnas BRANCH=vendor BUILD_DESKTOP=yes BUILD_MINIMAL=yes DEB_COMPRESS=xz KERNEL_CONFIGURE=no RELEASE=jammy KERNEL_GIT=shallow [x] Tested on hinlink hnas which has 4 2.5 inch sata. Checklist: Please delete options that are not relevant. [x] My code follows the style guideline…

Description Adding broadcom wifi modules to the rk35xx legacy kernel configuration. The edge configuration already has these. This are supported hardware that shipped as optional accessories with the Rock 5b (Official adapter list) How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Compiled kernel with new options, deployed to rock-5b board, and validated wifi module (A1) connectivity. % ls /sys/class/net/wlan0/device/driver -l lrwxrwxrwx 1 root root 0 Jan 27 13:21 /sys/class/net/wlan0/device/driver -> ../../../../../../../bus/sdio/drivers/brcmfmac % ip l…

rk35xx: drop vendor-boogie-panthor BRANCH; it has been integrated into vendor rk35xx: drop vendor-boogie-panthor BRANCH; it has been integrated into vendor This reverts commit 5f59fe63f19391eea3f1d7f99e62db9bbc9c961f View the full article

Description As discussed in https://github.com/armbian/build/issues/6835 Deprecate legacy, but only remove from board configs for now. Print a warning, the whole branch is slated for removal. @efectn Please have a look at Opi5, there was some functions in the board config uboot_add_sata_target @amazingfate @igorpecovnik I think it would be best to change the default branch in the vendor kernel repo to the new 6.1-rk3 https://github.com/armbian/linux-rockchip what do you think? GitHub issue reference: https://github.com/armbian/build/issues/6835 Jira reference number AR-2394 How Has This Been Tested? [x] ./compile.sh kernel BOARD=nanopi-r6s BRANCH=legacy BUILD_DESKTOP…

rk35xx/rockchip-rk3588: vendor: switch to armbian/linux-rockchip#rk-6.1-rkr1 rk35xx/rockchip-rk3588: vendor: switch to armbian/linux-rockchip#rk-6.1-rkr1 since https://github.com/armbian/linux-rockchip/pull/155 khadas-edge2: remove vendor branch, we've no kedge2 DT/patches for it yet View the full article

rkbin-tools: allow using custom rkbin RKBIN_GIT_BRANCH as well as RKBIN_GIT_URL rkbin-tools: allow using custom rkbin RKBIN_GIT_BRANCH as well as RKBIN_GIT_URL notice: the rkbin repo or the bins themselves are not hashed or included in the u-boot version (yet) make sure to avoid caching when building with those custom git/branch (ARTIFACT_IGNORE_CACHE=yes CLEAN_LEVEL=make-uboot) View the full article

Description clean patch and enable Type C on roc-rk3399-pc How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. compile and boot test Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any dependent changes have been merged and published in downstream modules View the full article

Description Rock 4C+ image experienced instability during boot due to the bootloader initializing with an incorrect memory clock of 800MHz, instead of the maximum supported 666MHz. This update incorporates a newer version of U-Boot that includes a default configuration for the 4C+ and specifies binaries for DDR and BL31. How Has This Been Tested? [x] Compiled and verified default image builds for 4C+ on working hardware [x] Confirmed that bootloader sets memory clock to 666MHz [x] Confirmed stability of boots Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings V…

Description irony of using bleeding edge uboot was to take advantage of the native rock 4SE support in uboot....which is broken. using generic rockpi-4i uboot defconfig for now.. which works.. leaving placeholder so that we can one day, embrace what is pure. View the full article

Description Add support for sd card for Rock 5 (mainline linux) Remove tegra from kernel config Update Linux kernel to rc2 How Has This Been Tested? I builded image and Rock 5 boot up from sd card/emmc and I was able to reboot [x] boot up from emmc [x] boot up from sd card [x] reboot Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description add patch which add to vendor u-boot support for sata boot from m.2 e-key(switch m.2 to sata and extra sata defconfig) added additional u-boot target too build the additional u-boot image with these changes the patch can be removed if this pull request for vendor u-boot for rock-3a is accepted https://github.com/radxa/u-boot/pull/95 Documentation summary for feature / change rock-3a:add u-boot image for sata boot on m.2 e.key for sata boot the rkspi_loader_sata.img has to be flashed on spi flash (use dd or flashcp) flash armbian image to sata device with dd (or ifd3f/caligula , etcher cli ) mount armbian boot partition on sata device and add ro…

We need to slow down to HS200 for stable emmc. Add tsadc node for temp sensor. Add power off fix from mail list Description How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=rock-5b BRANCH=edge DEB_COMPRESS=xz KERNEL_GIT=shallow [x] emmc is stable, cpu temp is shown from command sensors, and command poweroff is working. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made correspondin…

This is a continuation of: https://github.com/armbian/build/pull/3984 (by @rpardini ) that has the new board split into the new family - rockchip-rk3588 (as indicated by @igorpecovnik) rock-5b: add initial radxa rock-5b .wip (by @amazingfate); vendor u-boot & vendor kernel uses legacy with Radxa's 5.10 (with no patches added to armbian). CONFIG_VT=y & SKIP_BOOTSPLASH=yes patch by @piter75 in uboot for working 'source' command so boot.scr can be used, and not extlinux rock5 add kernel options by @lanefu Tested on my rock-5b. View the full article

rock-5b: add initial radxa rock-5b .wip (by @amazingfate); vendor u-boot & vendor kernel .wip board using BOARDFAMILY rk35xx, which was for rock-3a legacy with Radxa's 5.10 kernel which is Rockchip's 5.10 with half-of Android 12's 5.10-lts 💩 CONFIG_VT=y & SKIP_BOOTSPLASH=yes patch by @piter75 in uboot for working 'source' command so boot.scr can be used, and not extlinux rock5 add kernel optiions by @lanefu Originally by @amazingfate I just gathered the stuff and built images. Since I don't have the board, I'm PR'ing draft so you all can build and tweak. No BOARFAMILY was really adequate, rk35xx was only for rock-3a in the same situation, so lesser of evils may…

Description Enables spi flash on Rock-5b Recreated as a patch based on discussion in #6137 will take me some time to setup and do the big-boy pants stuff to submit to mainline but I'll def work on it. View the full article

Description Issue reported from radxa's forum: https://forum.radxa.com/t/the-changable-wifi-interface-name-of-rock-5c-lite/20921 Rock5c has an onboard aic8800 usb wifi/bt module, which has random wifi interface name by default, which will cause non-static connection name created by networkmanager. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] PREFER_DOCKER=no ./compile.sh kernel BOARD=rock-5c BRANCH=vendor BUILD_DESKTOP=yes BUILD_MINIMAL=no DEB_COMPRESS=xz KERNEL_CONFIGURE=no RELEASE=jammy KERNEL_GIT=shallow DESKTOP_APPGROUPS_SELECTED= DESKTOP_ENVIRONMENT=g…

Description made overlay to enable spi flash on rock5b based on https://github.com/Googulator/linux-rk3588-midstream/blob/adbadbf32e87b308688136aa55c03b1bed6f7e03/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts#L704C1-L724C4 root@rock-5b:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mtdblock0 31:0 0 16M 0 disk mmcblk1 179:0 0 59.7G 0 disk ├─mmcblk1p1 179:1 0 256M 0 part /boot └─mmcblk1p2 179:2 0 58.8G 0 part /var/log.hdd / zram0 251:0 0 3.8G 0 disk [SWAP] zram1 251:1 0 50M 0 disk /var/log zram2 251:2 0 0B 0 disk nvme0n1 259:0 0 238.5G 0 disk └─n…

Description Today many users get their rock5c/lite. And they find some rk3582 socs has disabled rkvdec nodes. The board I have has good rkvdec nodes, but when there is at least one rkvdec node disabled, node rkvdec-ccu should get disabled. Otherwise this will cause board not booting. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh BOARD=rock-5c BRANCH=vendor BUILD_DESKTOP=no BUILD_MINIMAL=yes DEB_COMPRESS=xz KERNEL_CONFIGURE=no RELEASE=bookworm KERNEL_GIT=shallow [x] Tested on board with broken rkvdec nodes. Checklist: Please delete options that…

Description Big pull request that consolidates rockchip 32bit and rk322x families together, for less painful kernel patch adaption during maintance cycles. Jira reference number AR-1988 Despite this is the minor nightmarish part of the rockchip patches archive, consolidation could and has been done. In particular, this PR do: merge patches from rockchip and rk322x families for current and edge kernels, moving everything into rockchipfamily migrate edge kernel rockchip-6.6 into patch series, rename all patches with more understandable names with alphabetical prefixes in place of numeric ones (sunxi inspired) implement new style dt and overlay directories for edge and …

Description Sakura Pi RK3308B board adds kernel 6.6 and 6.8 support. #6497 only supports the Sakura Pi RK3308B board running smoothly on kernel 6.2, while encountering a lack of device tree in kernel 6.6 and kernel 6.8. How Has This Been Tested? [x] Compiled and tested to boot on kernel 6.6. [x] Compiled and tested to boot on kernel 6.8. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

Description working：WiFi，HDMI，SATA，ETH not work：digital display，IR... Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Panther X2 is a blockchain terminal device:https://shop.panther.global/ I used rock 3c's uboot defconfig and uboot devicetree and it worked fine. I may patch in the future, as the uboot patch is board specific. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

rockchip-rk3588 6.8.y: nanopct6: Add NanoPC T6 SPI Flash (v6.8.y version) rockchip-rk3588 6.8.y: nanopct6: Add NanoPC T6 SPI Flash (v6.8.y version) View the full article

rockchip-rk3588 edge: bump to 6.7-rc7; add overlays rockchip-rk3588 edge 6.7-rc4: rewrite/rebase patches in the process, MAINTAINERS file patches are dropped rockchip-rk3588 edge 6.7: bump to 6.4-rc7; rebase patches rockchip-rk3588 edge 6.7: add overlay support; add rockchip-rk3588-sata2 overlay rockchip-rk3588 edge 6.7-rc7: update .config, no changes View the full article

Description bump rockchip-rk3588-edge to 6.4 add preliminary device tree for nanopc-t6 (not yet working) adopt new dts/overlay structure for rockchip-rk3588-edge How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. builds, no boards have booted with edge kernel here so far Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dep…

Description Add H264/VP8/MPEG2 decoder and RGA2 nodes to RK3588 edge kernel. cc @amazingfate How Has This Been Tested? [x] Built and probed v4l2 device Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description This PR makes Khadas Edge 2 usable on mainline and update USB patches on rk3588 edge. What is not working: MCU fan control. The driver is exists on upstream kernel but VIM3 has different fan control register and logic, needs new implementation. Type-C port Wlan and Bluetooth Jira reference number AR-2082 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-und…

Description This commit adds Khadas MCU support to edge kernel. It can be used for fan control and some device configurations. Fan state can be set from /sys/class/thermal/cooling_device3. Jira reference number AR-2085 How Has This Been Tested? [x] Tested fan control. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Add GPU support to Khadas Edge 2 and add support for more display resolutions. Jira reference number [AR-9999] How Has This Been Tested? [x] Built and booted View the full article

Description This PR fixed usb_host1_xhci port on Orange Pi 5 Plus with edge kernel. We have to use host mode by default since OPi makes the port USB3 host and connect it to USB hub. Jira reference number [AR-9999] How Has This Been Tested? [x] Build Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description This PR refreshes OPP patches from kernel mailing list and adds automatic fan control support to Khadas Edge 2. Jira reference number [AR-9999] How Has This Been Tested? [x] Fan trip points have been tested. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Update edge kernel to 6.11 Add Hantro VPU decoder back (H264 is not enabled) Refresh HDMI TX and RX patches from Collabora tree Disable HDMI-RX on OPi5+ by default and add an overlay in order to avoid interrupts Use green led as heartbeat in Orange Pi 5 Plus To Do [ ] Crypto, RNG and some other nodes seem to have been removed during rewrites. I will add them back. [ ] USB-C doesn't work on both boards as far as i've tested. This needs to be checked. GitHub issue reference: Jira reference number [AR-9999] How Has This Been Tested? [x] Orange Pi 5 Plus and Khadas Edge 2 boots. [x] HDMI works up to 1080p@120fps [ ] Tests with more boards. Checklist: Please…

patch/kernel/rockchip-rk3588-legacy: add mainline kernel patches: from 5.10.73 to 5.10.149 Tested by myself: https://github.com/unifreq/linux-rock5b View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…